cartreader/hardware/vselect/VSelect_bom.csv

Designator,Footprint,Quantity,Value,LCSC Part #
"C1, C2",0402,2,0.1u,C1525
C3,0402,1,10u,C15525
R1,0402,1,560R,C25123
U1,IC - VSELECT - TPS2113,1,TPS211x,C354512
VSELECT Module Rev 3 Refreshed things a bit to improve clarity, make installation easier, and to reduce costs when manufacturing in bulk. There is no reason to upgrade already installed modules to this revision. * Changed the module to be installed on the back of the PCB again as it is much easier to install that way. * Added pad for the STAT pin. There's no real use for this at the moment. * Changed the layout slightly to allow room for all of the capacitors' legends. This should make things more clear when assembling a module by hand. * Changed the legends for the jumper pads to use the net name instead of the designator. This should make things easier during installation. * Added legends to specify 3.3V/5V for the pads that connect to the power switch footprint. Hopefully, this helps keep people from installing the module incorrectly. * Updated the TPS2113 footprint to the new one that allows using either the TSSOP or SON package. This should give more flexibility regarding part availability. * Changed part numbers to more readily available parts. This should reduce the cost of machine assembly. 2024-08-26 17:29:01 +02:00			`Designator,Footprint,Quantity,Value,LCSC Part #`
Fix/cleanup the VSELECT Module project files * Fixed the field name for the LCSC part number so the BOM exports with the part numbers. * Removed the test points from the schematic as they are no longer needed. * Added notes for setting the ILIM resistor to the schematic. * Added an image of the PCB and PDF of the schematic. Note: The PCB itself didn't change, so it is still Rev 3. 2024-08-28 13:00:55 +02:00			`"C1, C2",0402,2,0.1u,C1525`
			`C3,0402,1,10u,C15525`
			`R1,0402,1,560R,C25123`
			`U1,IC - VSELECT - TPS2113,1,TPS211x,C354512`