cartreader/Cart_Reader/N64.ino

//******************************************
// NINTENDO 64 MODULE
//******************************************
#ifdef enable_N64

/******************************************
  Defines
 *****************************************/
// These two macros toggle the eepDataPin/ControllerDataPin between input and output
// External 1K pull-up resistor from eepDataPin to VCC required
// 0x10 = 00010000 -> Port H Pin 4
#define N64_HIGH DDRH &= ~0x10
#define N64_LOW DDRH |= 0x10
// Read the current state(0/1) of the eepDataPin
#define N64_QUERY (PINH & 0x10)

/******************************************
   Variables
 *****************************************/
// Received N64 Eeprom data bits, 1 page
bool tempBits[65];
int eepPages;

// N64 Controller
// 256 bits of received Controller data + 8 bit CRC
char N64_raw_dump[265];
// Array that holds one Controller Pak block of 32 bytes data
byte myBlock[33];
String rawStr = ""; // above char array read into a string
struct {
  char stick_x;
  char stick_y;
}
N64_status;
//stings that hold the buttons
String button = "N/A";
String lastbutton = "N/A";

// Rom base address
unsigned long romBase = 0x10000000;

// Flashram type
byte flashramType = 1;
boolean MN63F81MPN = false;

//ControllerTest
bool quit = 1;

#ifdef savesummarytotxt
String CRC1 = "";
String CRC2 = "";
#endif

/******************************************
  Menu
*****************************************/
// N64 start menu
static const char n64MenuItem1[] PROGMEM = "Game Cartridge";
static const char n64MenuItem2[] PROGMEM = "Controller";
static const char n64MenuItem3[] PROGMEM = "Flash Repro";
static const char n64MenuItem4[] PROGMEM = "Flash Gameshark";
static const char n64MenuItem5[] PROGMEM = "Reset";
static const char* const menuOptionsN64[] PROGMEM = {n64MenuItem1, n64MenuItem2, n64MenuItem3, n64MenuItem4, n64MenuItem5};

// N64 controller menu items
static const char N64ContMenuItem1[] PROGMEM = "Test Controller";
static const char N64ContMenuItem2[] PROGMEM = "Read ControllerPak";
static const char N64ContMenuItem3[] PROGMEM = "Write ControllerPak";
static const char N64ContMenuItem4[] PROGMEM = "Reset";
static const char* const menuOptionsN64Controller[] PROGMEM = {N64ContMenuItem1, N64ContMenuItem2, N64ContMenuItem3, N64ContMenuItem4};

// N64 cart menu items
static const char N64CartMenuItem1[] PROGMEM = "Read ROM";
static const char N64CartMenuItem2[] PROGMEM = "Read Save";
static const char N64CartMenuItem3[] PROGMEM = "Write Save";
static const char N64CartMenuItem4[] PROGMEM = "Force Savetype";
static const char N64CartMenuItem5[] PROGMEM = "Reset";
static const char* const menuOptionsN64Cart[] PROGMEM = {N64CartMenuItem1, N64CartMenuItem2, N64CartMenuItem3, N64CartMenuItem4, N64CartMenuItem5};

// N64 CRC32 error menu items
static const char N64CRCMenuItem1[] PROGMEM = "No";
static const char N64CRCMenuItem2[] PROGMEM = "Yes and keep old";
static const char N64CRCMenuItem3[] PROGMEM = "Yes and delete old";
static const char N64CRCMenuItem4[] PROGMEM = "Reset";
static const char* const menuOptionsN64CRC[] PROGMEM = {N64CRCMenuItem1, N64CRCMenuItem2, N64CRCMenuItem3, N64CRCMenuItem4};

// Rom menu
static const char N64RomItem1[] PROGMEM = "4 MB";
static const char N64RomItem2[] PROGMEM = "8 MB";
static const char N64RomItem3[] PROGMEM = "12 MB";
static const char N64RomItem4[] PROGMEM = "16 MB";
static const char N64RomItem5[] PROGMEM = "32 MB";
static const char N64RomItem6[] PROGMEM = "64 MB";
static const char* const romOptionsN64[] PROGMEM = {N64RomItem1, N64RomItem2, N64RomItem3, N64RomItem4, N64RomItem5, N64RomItem6};

// Save menu
static const char N64SaveItem1[] PROGMEM = "None";
static const char N64SaveItem2[] PROGMEM = "4K EEPROM";
static const char N64SaveItem3[] PROGMEM = "16K EEPROM";
static const char N64SaveItem4[] PROGMEM = "SRAM";
static const char N64SaveItem5[] PROGMEM = "FLASH";
static const char* const saveOptionsN64[] PROGMEM = {N64SaveItem1, N64SaveItem2, N64SaveItem3, N64SaveItem4, N64SaveItem5};

// Repro write buffer menu
static const char N64BufferItem1[] PROGMEM = "No buffer";
static const char N64BufferItem2[] PROGMEM = "32 Byte";
static const char N64BufferItem3[] PROGMEM = "64 Byte";
static const char N64BufferItem4[] PROGMEM = "128 Byte";
static const char* const bufferOptionsN64[] PROGMEM = {N64BufferItem1, N64BufferItem2, N64BufferItem3, N64BufferItem4};

// Repro sector size menu
static const char N64SectorItem1[] PROGMEM = "8 KB";
static const char N64SectorItem2[] PROGMEM = "32 KB";
static const char N64SectorItem3[] PROGMEM = "64 KB";
static const char N64SectorItem4[] PROGMEM = "128 KB";
static const char* const sectorOptionsN64[] PROGMEM = {N64SectorItem1, N64SectorItem2, N64SectorItem3, N64SectorItem4};

// N64 start menu
void n64Menu() {
  // create menu with title and 5 options to choose from
  unsigned char n64Dev;
  // Copy menuOptions out of progmem
  convertPgm(menuOptionsN64, 5);
  n64Dev = question_box(F("Select N64 device"), menuOptions, 5, 0);

  // wait for user choice to come back from the question box menu
  switch (n64Dev)
  {
    case 0:
      display_Clear();
      display_Update();
      setup_N64_Cart();
      printCartInfo_N64();
      mode = mode_N64_Cart;
      break;

    case 1:
      display_Clear();
      display_Update();
      setup_N64_Controller();
      mode = mode_N64_Controller;
      break;

    case 2:
      display_Clear();
      display_Update();
      setup_N64_Cart();
      flashRepro_N64();
      printCartInfo_N64();
      mode = mode_N64_Cart;
      break;

    case 3:
      display_Clear();
      display_Update();
      setup_N64_Cart();
      flashGameshark_N64();
      printCartInfo_N64();
      mode = mode_N64_Cart;
      break;

    case 4:
      resetArduino();
      break;
  }
}

// N64 Controller Menu
void n64ControllerMenu() {
  // create menu with title and 4 options to choose from
  unsigned char mainMenu;
  // Copy menuOptions out of progmem
  convertPgm(menuOptionsN64Controller, 4);
  mainMenu = question_box(F("N64 Controller"), menuOptions, 4, 0);

  // wait for user choice to come back from the question box menu
  switch (mainMenu)
  {
    case 0:
      resetController();
      display_Clear();
      display_Update();
#if defined(enable_OLED)
      controllerTest_OLED();
#elif defined(enable_LCD)
      controllerTest_LCD();
#elif defined(enable_serial)
      controllerTest_Serial();
#endif
      quit = 1;
      break;

    case 1:
      resetController();
      checkController();
      display_Clear();
      display_Update();
      readMPK();
      verifyCRC();
      validateMPK();
      println_Msg(F(""));
      println_Msg(F("Press Button..."));
      display_Update();
      wait();
      break;

    case 2:
      resetController();
      checkController();
      display_Clear();
      display_Update();
      // Change to root
      filePath[0] = '\0';
      sd.chdir("/");
      // Launch file browser
      fileBrowser(F("Select mpk file"));
      display_Clear();
      display_Update();
      writeMPK();
      delay(500);
      verifyMPK();
      println_Msg(F(""));
      println_Msg(F("Press Button..."));
      display_Update();
      wait();
      break;

    case 3:
      resetArduino();
      break;
  }
}

// N64 Cartridge Menu
void n64CartMenu() {
  // create menu with title and 4 options to choose from
  unsigned char mainMenu;
  // Copy menuOptions out of progmem
  convertPgm(menuOptionsN64Cart, 5);
  mainMenu = question_box(F("N64 Cart Reader"), menuOptions, 5, 0);

  // wait for user choice to come back from the question box menu
  switch (mainMenu)
  {
    case 0:
      sd.chdir("/");
      readRom_N64();
      break;

    case 1:
      sd.chdir("/");
      display_Clear();

      if (saveType == 1) {
        println_Msg(F("Reading SRAM..."));
        display_Update();
        readSram(32768, 1);
      }
      else  if (saveType == 4) {
        getFramType();
        println_Msg(F("Reading FLASH..."));
        display_Update();
        readFram(flashramType);
      }
      else if ((saveType == 5) || (saveType == 6)) {
        println_Msg(F("Reading EEPROM..."));
        display_Update();
#ifdef clockgen_installed
        readEeprom();
#else
        readEeprom_CLK();
#endif
      }
      else {
        print_Error(F("Savetype Error"), false);
      }
      println_Msg(F(""));
      println_Msg(F("Press Button..."));
      display_Update();
      wait();
      break;

    case 2:
      filePath[0] = '\0';
      sd.chdir("/");
      if (saveType == 1) {
        // Launch file browser
        fileBrowser(F("Select sra file"));
        display_Clear();

        writeSram(32768);
        writeErrors = verifySram(32768, 1);
        if (writeErrors == 0) {
          println_Msg(F("SRAM verified OK"));
          display_Update();
        }
        else {
          print_Msg(F("Error: "));
          print_Msg(writeErrors);
          println_Msg(F(" bytes "));
          print_Error(F("did not verify."), false);
        }
      }
      else if (saveType == 4) {
        // Launch file browser
        fileBrowser(F("Select fla file"));
        display_Clear();
        getFramType();
        writeFram(flashramType);
        print_Msg(F("Verifying..."));
        display_Update();
        writeErrors = verifyFram(flashramType);
        if (writeErrors == 0) {
          println_Msg(F("OK"));
          display_Update();
        }
        else {
          println_Msg("");
          print_Msg(F("Error: "));
          print_Msg(writeErrors);
          println_Msg(F(" bytes "));
          print_Error(F("did not verify."), false);
        }
      }
      else if ((saveType == 5) || (saveType == 6)) {
        // Launch file browser
        fileBrowser(F("Select eep file"));
        display_Clear();

#ifdef clockgen_installed
        writeEeprom();
        writeErrors = verifyEeprom();
#else
        writeEeprom_CLK();
        writeErrors = verifyEeprom_CLK();
#endif

        if (writeErrors == 0) {
          println_Msg(F("EEPROM verified OK"));
          display_Update();
        }
        else {
          print_Msg(F("Error: "));
          print_Msg(writeErrors);
          println_Msg(F(" bytes "));
          print_Error(F("did not verify."), false);
        }
      }
      else {
        display_Clear();
        print_Error(F("Save Type Error"), false);
      }
      println_Msg(F("Press Button..."));
      display_Update();
      wait();
      break;

    case 3:
      // create submenu with title and 6 options to choose from
      unsigned char N64SaveMenu;
      // Copy menuOptions out of progmem
      convertPgm(saveOptionsN64, 5);
      N64SaveMenu = question_box(F("Select save type"), menuOptions, 5, 0);

      // wait for user choice to come back from the question box menu
      switch (N64SaveMenu)
      {
        case 0:
          // None
          saveType = 0;
          break;

        case 1:
          // 4K EEPROM
          saveType = 5;
          eepPages = 64;
          break;

        case 2:
          // 16K EEPROM
          saveType = 6;
          eepPages = 256;
          break;

        case 3:
          // SRAM
          saveType = 1;
          break;

        case 4:
          // FLASHRAM
          saveType = 4;
          break;
      }
      break;

    case 4:
      resetArduino();
      break;
  }
}

/******************************************
   Setup
 *****************************************/
void setup_N64_Controller() {
  // Output a low signal
  PORTH &= ~(1 << 4);
  // Set Controller Data Pin(PH4) to Input
  DDRH &= ~(1 << 4);
}

void setup_N64_Cart() {
  // Set Address Pins to Output and set them low
  //A0-A7
  DDRF = 0xFF;
  PORTF = 0x00;
  //A8-A15
  DDRK = 0xFF;
  PORTK = 0x00;

  // Set Control Pins to Output RESET(PH0) WR(PH5) RD(PH6) aleL(PC0) aleH(PC1)
  DDRH |= (1 << 0) | (1 << 5) | (1 << 6);
  DDRC |= (1 << 0) | (1 << 1);
  // Pull RESET(PH0) low until we are ready
  PORTH &= ~(1 << 0);
  // Output a high signal on WR(PH5) RD(PH6), pins are active low therefore everything is disabled now
  PORTH |= (1 << 5) | (1 << 6);
  // Pull aleL(PC0) low and aleH(PC1) high
  PORTC &= ~(1 << 0);
  PORTC |= (1 << 1);

#ifdef clockgen_installed
  // Adafruit Clock Generator

  initializeClockOffset();

  if (!i2c_found) {
    display_Clear();
    print_Error(F("Clock Generator not found"), true);
  }

  // Set Eeprom clock to 2Mhz
  clockgen.set_freq(200000000ULL, SI5351_CLK1);

  // Start outputting Eeprom clock
  clockgen.output_enable(SI5351_CLK1, 1); // Eeprom clock

#else
  // Set Eeprom Clock Pin(PH1) to Output
  DDRH |= (1 << 1);
  // Output a high signal
  PORTH |= (1 << 1);
#endif

  // Set Eeprom Data Pin(PH4) to Input
  DDRH &= ~(1 << 4);
  // Activate Internal Pullup Resistors
  //PORTH |= (1 << 4);

  // Set sram base address
  sramBase = 0x08000000;

#ifdef clockgen_installed
  // Wait for clock generator
  clockgen.update_status();
#endif

  // Wait until all is stable
  delay(300);

  // Pull RESET(PH0) high to start eeprom
  PORTH |= (1 << 0);
}

/******************************************
   Low level functions
 *****************************************/
// Switch Cartridge address/data pins to write
void adOut_N64() {
  //A0-A7
  DDRF = 0xFF;
  PORTF = 0x00;
  //A8-A15
  DDRK = 0xFF;
  PORTK = 0x00;
}

// Switch Cartridge address/data pins to read
void adIn_N64() {
  //A0-A7
  DDRF = 0x00;
  //A8-A15
  DDRK = 0x00;
  //Enable internal pull-up resistors
  //PORTF = 0xFF;
  //PORTK = 0xFF;
}

// Set Cartridge address
void setAddress_N64(unsigned long myAddress) {
  // Set address pins to output
  adOut_N64();

  // Split address into two words
  word myAdrLowOut = myAddress & 0xFFFF;
  word myAdrHighOut = myAddress >> 16;

  // Switch WR(PH5) RD(PH6) ale_L(PC0) ale_H(PC1) to high (since the pins are active low)
  PORTH |= (1 << 5) | (1 << 6);
  PORTC |= (1 << 1);
  __asm__("nop\n\t");
  PORTC |= (1 << 0);

  // Output high part to address pins
  PORTF = myAdrHighOut & 0xFF;
  PORTK = (myAdrHighOut >> 8) & 0xFF;

  // Leave ale_H high for additional 62.5ns
  __asm__("nop\n\t");

  // Pull ale_H(PC1) low
  PORTC &= ~(1 << 1);

  // Output low part to address pins
  PORTF = myAdrLowOut & 0xFF;
  PORTK = (myAdrLowOut >> 8) & 0xFF;

  // Leave ale_L high for ~125ns
  __asm__("nop\n\t""nop\n\t");

  // Pull ale_L(PC0) low
  PORTC &= ~(1 << 0);

  // Wait ~600ns just to be sure address is set
  __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");

  // Set data pins to input
  adIn_N64();
}

// Read one word out of the cartridge
word readWord_N64() {
  // Pull read(PH6) low
  PORTH &= ~(1 << 6);

  // Wait ~310ns
  __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");

  // Join bytes from PINF and PINK into a word
  word tempWord = ( ( PINK & 0xFF ) << 8 ) | ( PINF & 0xFF );

  // Pull read(PH6) high
  PORTH |= (1 << 6);

  // Wait 62.5ns
  __asm__("nop\n\t");
  return tempWord;
}

// Write one word to data pins of the cartridge
void writeWord_N64(word myWord) {
  // Set address pins to output
  adOut_N64();

  // Output word to AD0-AD15
  PORTF = myWord & 0xFF;
  PORTK = (myWord >> 8) & 0xFF;

  // Wait ~62.5ns
  __asm__("nop\n\t");

  // Pull write(PH5) low
  PORTH &= ~(1 << 5);

  // Wait ~310ns
  __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");

  // Pull write(PH5) high
  PORTH |= (1 << 5);

  // Wait ~125ns
  __asm__("nop\n\t""nop\n\t");

  // Set data pins to input
  adIn_N64();
}

/******************************************
   N64 Controller CRC Functions
 *****************************************/
static word addrCRC(word address) {
  // CRC table
  word xor_table[16] = { 0x0, 0x0, 0x0, 0x0, 0x0, 0x15, 0x1F, 0x0B, 0x16, 0x19, 0x07, 0x0E, 0x1C, 0x0D, 0x1A, 0x01 };
  word crc = 0;
  // Make sure we have a valid address
  address &= ~0x1F;
  // Go through each bit in the address, and if set, xor the right value into the output
  for (int i = 15; i >= 5; i--) {
    // Is this bit set?
    if ( ((address >> i) & 0x1)) {
      crc ^= xor_table[i];
    }
  }
  // Just in case
  crc &= 0x1F;
  // Create a new address with the CRC appended
  return address | crc;
}

static uint8_t dataCRC( uint8_t *data ) {
  uint8_t ret = 0;
  for ( int i = 0; i <= 32; i++ ) {
    for ( int j = 7; j >= 0; j-- ) {
      int tmp = 0;
      if ( ret & 0x80 ) {
        tmp = 0x85;
      }
      ret <<= 1;
      if ( i < 32 ) {
        if ( data[i] & (0x01 << j) ) {
          ret |= 0x1;
        }
      }
      ret ^= tmp;
    }
  }
  return ret;
}

/******************************************
   N64 Controller Protocol Functions
 *****************************************/
void N64_send(unsigned char *buffer, char length) {
  // Send these bytes
  char bits;

  // This routine is very carefully timed by examining the assembly output.
  // Do not change any statements, it could throw the timings off
  //
  // We get 16 cycles per microsecond, which should be plenty, but we need to
  // be conservative. Most assembly ops take 1 cycle, but a few take 2
  //
  // I use manually constructed for-loops out of gotos so I have more control
  // over the outputted assembly. I can insert nops where it was impossible
  // with a for loop

  asm volatile (";Starting outer for loop");
outer_loop:
  {
    asm volatile (";Starting inner for loop");
    bits = 8;
inner_loop:
    {
      // Starting a bit, set the line low
      asm volatile (";Setting line to low");
      N64_LOW; // 1 op, 2 cycles

      asm volatile (";branching");
      if (*buffer >> 7) {
        asm volatile (";Bit is a 1");
        // 1 bit
        // remain low for 1us, then go high for 3us
        // nop block 1
        asm volatile ("nop\nnop\nnop\nnop\nnop\n");

        asm volatile (";Setting line to high");
        N64_HIGH;

        // nop block 2
        // we'll wait only 2us to sync up with both conditions
        // at the bottom of the if statement
        asm volatile ("nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                     );

      }
      else {
        asm volatile (";Bit is a 0");
        // 0 bit
        // remain low for 3us, then go high for 1us
        // nop block 3
        asm volatile ("nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\nnop\n"
                      "nop\n");

        asm volatile (";Setting line to high");
        N64_HIGH;

        // wait for 1us
        asm volatile ("; end of conditional branch, need to wait 1us more before next bit");

      }
      // end of the if, the line is high and needs to remain
      // high for exactly 16 more cycles, regardless of the previous
      // branch path

      asm volatile (";finishing inner loop body");
      --bits;
      if (bits != 0) {
        // nop block 4
        // this block is why a for loop was impossible
        asm volatile ("nop\nnop\nnop\nnop\nnop\n"
                      "nop\nnop\nnop\nnop\n");
        // rotate bits
        asm volatile (";rotating out bits");
        *buffer <<= 1;

        goto inner_loop;
      } // fall out of inner loop
    }
    asm volatile (";continuing outer loop");
    // In this case: the inner loop exits and the outer loop iterates,
    // there are /exactly/ 16 cycles taken up by the necessary operations.
    // So no nops are needed here (that was lucky!)
    --length;
    if (length != 0) {
      ++buffer;
      goto outer_loop;
    } // fall out of outer loop
  }
}

void N64_stop() {
  // send a single stop (1) bit
  // nop block 5
  asm volatile ("nop\nnop\nnop\nnop\n");
  N64_LOW;
  // wait 1 us, 16 cycles, then raise the line
  // 16-2=14
  // nop block 6
  asm volatile ("nop\nnop\nnop\nnop\nnop\n"
                "nop\nnop\nnop\nnop\nnop\n"
                "nop\nnop\nnop\nnop\n");
  N64_HIGH;
}

void N64_get(word bitcount) {
  // listen for the expected bitcount/8 bytes of data back from the controller and
  // blast it out to the N64_raw_dump array, one bit per byte for extra speed.
  asm volatile (";Starting to listen");
  unsigned char timeout;
  char *bitbin = N64_raw_dump;

  // Again, using gotos here to make the assembly more predictable and
  // optimization easier (please don't kill me)
read_loop:
  timeout = 0x3f;
  // wait for line to go low
  while (N64_QUERY) {
    if (!--timeout)
      return;
  }
  // wait approx 2us and poll the line
  asm volatile (
    "nop\nnop\nnop\nnop\nnop\n"
    "nop\nnop\nnop\nnop\nnop\n"
    "nop\nnop\nnop\nnop\nnop\n"
    "nop\nnop\nnop\nnop\nnop\n"
    "nop\nnop\nnop\nnop\nnop\n"
    "nop\nnop\nnop\nnop\nnop\n"
  );
  *bitbin = N64_QUERY;
  ++bitbin;
  --bitcount;
  if (bitcount == 0)
    return;

  // wait for line to go high again
  // it may already be high, so this should just drop through
  timeout = 0x3f;
  while (!N64_QUERY) {
    if (!--timeout)
      return;
  }
  goto read_loop;
}

/******************************************
   N64 Controller Functions
 *****************************************/
void get_button()
{
  // Command to send to the gamecube
  // The last bit is rumble, flip it to rumble
  // yes this does need to be inside the loop, the
  // array gets mutilated when it goes through N64_send
  unsigned char command[] = {
    0x01
  };

  // Empty buffer
  for (word i = 0; i < 265; i++) {
    N64_raw_dump[i] = 0xFF;
  }

  // don't want interrupts getting in the way
  noInterrupts();
  // send those 3 bytes
  N64_send(command, 1);
  N64_stop();
  // read in 32bits of data and dump it to N64_raw_dump
  N64_get(32);
  // end of time sensitive code
  interrupts();

  // The get_N64_status function sloppily dumps its data 1 bit per byte
  // into the get_status_extended char array. It's our job to go through
  // that and put each piece neatly into the struct N64_status
  int i;
  memset(&N64_status, 0, sizeof(N64_status));

  // bits: joystick x value
  // These are 8 bit values centered at 0x80 (128)
  for (i = 0; i < 8; i++) {
    N64_status.stick_x |= N64_raw_dump[16 + i] ? (0x80 >> i) : 0;
  }
  for (i = 0; i < 8; i++) {
    N64_status.stick_y |= N64_raw_dump[24 + i] ? (0x80 >> i) : 0;
  }

  // read char array N64_raw_dump into string rawStr
  rawStr = "";
  for (i = 0; i < 16; i++) {
    rawStr = rawStr + String(N64_raw_dump[i], DEC);
  }

  // Buttons (A,B,Z,S,DU,DD,DL,DR,0,0,L,R,CU,CD,CL,CR)
  if (rawStr.substring(0, 16) == "0000000000000000") {
    lastbutton = button;
    button = F("Press a button");
  }
  else
  {
    for (int i = 0; i < 16; i++)
    {
      // seems to be 16, 8 or 4 depending on what pin is used
      if (N64_raw_dump[i] == 16)
      {
        switch (i)
        {
          case 7:
            button = F("D-Right");
            break;

          case 6:
            button = F("D-Left");
            break;

          case 5:
            button = F("D-Down");
            break;

          case 4:
            button = F("D-Up");
            break;

          case 3:
            button = F("START");
            break;

          case 2:
            button = F("Z");
            break;

          case 1:
            button = F("B");
            break;

          case 0:
            button = F("A");
            break;

          case 15:
            button = F("C-Right");
            break;

          case 14:
            button = F("C-Left");
            break;

          case 13:
            button = F("C-Down");
            break;

          case 12:
            button = F("C-Up");
            break;

          case 11:
            button = F("R");
            break;

          case 10:
            button = F("L");
            break;
        }
      }
    }
  }
}


/******************************************
  N64 Controller Test
 *****************************************/
#ifdef enable_serial
void controllerTest_Serial() {
  while (quit) {
    // Get Button and analog stick
    get_button();

    // Print Button
    String buttonc = String("Button: " + String(button) + "   ");
    Serial.print(buttonc);

    // Print Stick X Value
    String stickx = String("X: " + String(N64_status.stick_x, DEC) + "   ");
    Serial.print(stickx);

    // Print Stick Y Value
    String sticky = String(" Y: " + String(N64_status.stick_y, DEC) + "   ");
    Serial.println(sticky);

    if (button == "Press a button" && lastbutton == "Z") {
      // Quit
      Serial.println("");
      quit = 0;
    }
  }
}
#endif

#ifdef enable_LCD
#define CENTER 64
// on which screens do we start
int startscreen = 1;
int test = 1;

void printSTR(String st, int x, int y)
{
  char buf[st.length() + 1];

  if (x == CENTER) {
    x = 64 - (((st.length() - 5) / 2) * 4);
  }

  st.toCharArray(buf, st.length() + 1);
  display.drawStr(x, y, buf);
}

void nextscreen()
{
  if (button == "Press a button" && lastbutton == "START")
  {
    // reset button
    lastbutton = "N/A";

    display.clearDisplay();
    if (startscreen != 4)
      startscreen = startscreen + 1;
    else
    {
      startscreen = 1;
      test = 1;
    }
  }
  else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
  {
    // Quit
    quit = 0;
  }
}

void controllerTest_LCD() {
  int mode = 0;

  //name of the current displayed result
  String anastick = "";

  // Graph
  int xax = 24; // midpoint x
  int yax = 24; // midpoint y
  int zax = 24; // size

  // variables to display test data of different sticks
  int upx = 0;
  int upy = 0;
  int uprightx = 0;
  int uprighty = 0;
  int rightx = 0;
  int righty = 0;
  int downrightx = 0;
  int downrighty = 0;
  int downx = 0;
  int downy = 0;
  int downleftx = 0;
  int downlefty = 0;
  int leftx = 0;
  int lefty = 0;
  int upleftx = 0;
  int uplefty = 0;

  // variables to save test data
  int bupx = 0;
  int bupy = 0;
  int buprightx = 0;
  int buprighty = 0;
  int brightx = 0;
  int brighty = 0;
  int bdownrightx = 0;
  int bdownrighty = 0;
  int bdownx = 0;
  int bdowny = 0;
  int bdownleftx = 0;
  int bdownlefty = 0;
  int bleftx = 0;
  int blefty = 0;
  int bupleftx = 0;
  int buplefty = 0;
  int results = 0;
  int prevStickX = 0;

  while (quit) {
    // Get Button and analog stick
    get_button();

    switch (startscreen)
    {
      case 1:
        {
          delay(20);
          display.clearDisplay();
          display.drawStr(32, 8, "Controller Test");
          display.drawLine(0, 10, 128, 10);

          // Print Button
          printSTR("       " + button + "       ", CENTER, 20);

          // Print Stick X Value
          String stickx = String("X: " + String(N64_status.stick_x, DEC) + "   ");
          printSTR(stickx, 36, 38);

          // Print Stick Y Value
          String sticky = String("Y: " + String(N64_status.stick_y, DEC) + "   ");
          printSTR(sticky, 74, 38);

          printSTR("(Continue with START)", 16, 55);

          //Update LCD
          display.updateDisplay();

          // go to next screen
          nextscreen();
          break;
        }
      case 2:
        {
          display.drawStr(36, 8, "Range Test");
          display.drawLine(0, 9, 128, 9);

          if (mode == 0)
          {
            // Print Stick X Value
            String stickx = String("X:" + String(N64_status.stick_x, DEC) + "   ");
            printSTR(stickx, 22 + 54, 26);

            // Print Stick Y Value
            String sticky = String("Y:" + String(N64_status.stick_y, DEC) + "   ");
            printSTR(sticky, 22 + 54, 36);
          }

          // Draw Axis
          display.drawPixel(10 + xax, 12 + yax);
          display.drawPixel(10 + xax, 12 + yax - 80 / 4);
          display.drawPixel(10 + xax, 12 + yax + 80 / 4);
          display.drawPixel(10 + xax + 80 / 4, 12 + yax);
          display.drawPixel(10 + xax - 80 / 4, 12 + yax);

          // Draw corners
          display.drawPixel(10 + xax - 68 / 4, 12 + yax - 68 / 4);
          display.drawPixel(10 + xax + 68 / 4, 12 + yax + 68 / 4);
          display.drawPixel(10 + xax + 68 / 4, 12 + yax - 68 / 4);
          display.drawPixel(10 + xax - 68 / 4, 12 + yax + 68 / 4);

          //Draw Analog Stick
          if (mode == 1)
          {
            display.drawPixel(10 + xax + N64_status.stick_x / 4, 12 + yax - N64_status.stick_y / 4);
            //Update LCD
            display.updateDisplay();
          }
          else
          {
            display.drawCircle(10 + xax + N64_status.stick_x / 4, 12 + yax - N64_status.stick_y / 4, 2);
            //Update LCD
            display.updateDisplay();
            delay(20);
            display.clearDisplay();
          }

          // switch mode
          if (button == "Press a button" && lastbutton == "Z")
          {
            if (mode == 0)
            {
              mode = 1;
              display.clearDisplay();
            }
            else
            {
              mode = 0;
              display.clearDisplay();
            }
          }
          // go to next screen
          nextscreen();
          break;
        }
      case 3:
        {
          display.setDrawColor(0);
          display.drawPixel(22 + prevStickX, 40);
          display.setDrawColor(1);
          printSTR("Skipping Test", 34, 8);
          display.drawLine(0, 9, 128, 9);
          display.drawFrame(22 + 0, 15, 22 + 59, 21);
          if (N64_status.stick_x > 0) {
            display.drawLine(22 + N64_status.stick_x, 15, 22 + N64_status.stick_x, 35);
            display.drawPixel(22 + N64_status.stick_x, 40);
            prevStickX = N64_status.stick_x;
          }

          printSTR("Try to fill the box by", 22, 45);
          printSTR("slowly moving right", 22, 55);
          //Update LCD
          display.updateDisplay();

          if (button == "Press a button" && lastbutton == "Z")
          {
            // reset button
            lastbutton = "N/A";

            display.clearDisplay();
          }
          // go to next screen
          nextscreen();
          break;
        }
      case 4:
        {
          switch ( test )
          {
            case 0:  // Display results
              {
                switch (results)
                {
                  case 0:
                    {
                      anastick = "YOURS";
                      upx = bupx;
                      upy = bupy;
                      uprightx = buprightx;
                      uprighty = buprighty;
                      rightx = brightx;
                      righty = brighty;
                      downrightx = bdownrightx;
                      downrighty = bdownrighty;
                      downx = bdownx;
                      downy = bdowny;
                      downleftx = bdownleftx;
                      downlefty = bdownlefty;
                      leftx = bleftx;
                      lefty = blefty;
                      upleftx = bupleftx;
                      uplefty = buplefty;

                      if (button == "Press a button" && lastbutton == "A")
                      {
                        // reset button
                        lastbutton = "N/A";
                        results = 1;
                      }

                      break;
                    }
                  case 1:
                    {
                      anastick = "ORIG";
                      upx = 1;
                      upy = 84;
                      uprightx = 67;
                      uprighty = 68;
                      rightx = 83;
                      righty = -2;
                      downrightx = 67;
                      downrighty = -69;
                      downx = 3;
                      downy = -85;
                      downleftx = -69;
                      downlefty = -70;
                      leftx = -85;
                      lefty = 0;
                      upleftx = -68;
                      uplefty = 68;

                      if (button == "Press a button" && lastbutton == "A")
                      {
                        // reset button
                        lastbutton = "N/A";
                        results = 0;
                      }
                      break;
                    }

                } //results
                delay(20);
                display.clearDisplay();

                printSTR(anastick, 22 + 50, 15);

                display.drawStr(22 + 50, 25, "U:");
                printSTR(String(upy), 100, 25);
                display.drawStr(22 + 50, 35, "D:");
                printSTR(String(downy), 100, 35);
                display.drawStr(22 + 50, 45, "L:");
                printSTR(String(leftx), 100, 45);
                display.drawStr(22 + 50, 55, "R:");
                printSTR(String(rightx), 100, 55);

                display.drawLine(xax + upx / 4, yax - upy / 4, xax + uprightx / 4, yax - uprighty / 4);
                display.drawLine(xax + uprightx / 4, yax - uprighty / 4, xax + rightx / 4, yax - righty / 4);
                display.drawLine(xax + rightx / 4, yax - righty / 4, xax + downrightx / 4, yax - downrighty / 4);
                display.drawLine(xax + downrightx / 4, yax - downrighty / 4, xax + downx / 4, yax - downy / 4);
                display.drawLine(xax + downx / 4, yax - downy / 4, xax + downleftx / 4, yax - downlefty / 4);
                display.drawLine(xax + downleftx / 4, yax - downlefty / 4, xax + leftx / 4, yax - lefty / 4);
                display.drawLine(xax + leftx / 4, yax - lefty / 4, xax + upleftx / 4, yax - uplefty / 4);
                display.drawLine(xax + upleftx / 4, yax - uplefty / 4, xax + upx / 4, yax - upy / 4);

                display.drawPixel(xax, yax);

                //Update LCD
                display.updateDisplay();
                break;
              } //display results

            case 1:// +y Up
              {
                display.drawStr(34, 26, "Hold Stick Up");
                display.drawStr(34, 34, "then press A");
                //display.drawBitmap(110, 60, ana1);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bupx = N64_status.stick_x;
                  bupy = N64_status.stick_y;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                  test = 2;
                }
                break;
              }

            case 2:// +y+x Up-Right
              {
                display.drawStr(42, 26, "Up-Right" );
                //display.drawBitmap(110, 60, ana2);

                if (button == "Press a button" && lastbutton == "A")
                {
                  buprightx = N64_status.stick_x;
                  buprighty = N64_status.stick_y;
                  test = 3;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 3:// +x Right
              {
                display.drawStr(50, 26, "Right" );
                //display.drawBitmap(110, 60, ana3);

                if (button == "Press a button" && lastbutton == "A")
                {
                  brightx = N64_status.stick_x;
                  brighty = N64_status.stick_y;
                  test = 4;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 4:// -y+x Down-Right
              {
                display.drawStr(38, 26, "Down-Right");
                //display.drawBitmap(110, 60, ana4);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bdownrightx = N64_status.stick_x;
                  bdownrighty = N64_status.stick_y;
                  test = 5;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 5:// -y Down
              {
                display.drawStr(49, 26, "Down");
                //display.drawBitmap(110, 60, ana5);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bdownx = N64_status.stick_x;
                  bdowny = N64_status.stick_y;
                  test = 6;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 6:// -y-x Down-Left
              {
                display.drawStr(39, 26, "Down-Left");
                //display.drawBitmap(110, 60, ana6);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bdownleftx = N64_status.stick_x;
                  bdownlefty = N64_status.stick_y;
                  test = 7;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 7:// -x Left
              {
                display.drawStr(51, 26, "Left" );
                //display.drawBitmap(110, 60, ana7);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bleftx = N64_status.stick_x;
                  blefty = N64_status.stick_y;
                  test = 8;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 8:// +y+x Up-Left
              {
                display.drawStr(43, 26, "Up-Left");
                //display.drawBitmap(110, 60, ana8);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bupleftx = N64_status.stick_x;
                  buplefty = N64_status.stick_y;
                  test = 0;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }
          }
          if (test != 0)
          {
            display.drawStr(38, 8, "Benchmark");
            display.drawLine(0, 9, 128, 9);
          }
          display.updateDisplay();
          // go to next screen
          nextscreen();
          break;
        }
    }
  }

}
#endif

#ifdef enable_OLED
#define CENTER 64

void oledPrint(const char string[], int x, int y) {

  if (x == CENTER)
    x = 64 - (strlen(string) / 2) * 6;
  display.setCursor(x, y);
  display.print(string);
}

void oledPrint(int number, int x, int y) {
  display.setCursor(x, y);
  display.print(number);
}

void printSTR(String st, int x, int y)
{
  char buf[st.length() + 1];

  st.toCharArray(buf, st.length() + 1);
  oledPrint(buf, x, y);
}

void controllerTest_OLED() {
  // on which screens do we start
  int startscreen = 1;
  int mode = 0;
  int test = 1;

  //name of the current displayed result
  String anastick = "";
  int prevStickX = 0;

  // Graph
  int xax = 22 + 24; // midpoint x
  int yax = 24; // midpoint y
  int zax = 24; // size

  // variables to display test data of different sticks
  int upx = 0;
  int upy = 0;
  int uprightx = 0;
  int uprighty = 0;
  int rightx = 0;
  int righty = 0;
  int downrightx = 0;
  int downrighty = 0;
  int downx = 0;
  int downy = 0;
  int downleftx = 0;
  int downlefty = 0;
  int leftx = 0;
  int lefty = 0;
  int upleftx = 0;
  int uplefty = 0;

  // variables to save test data
  int bupx = 0;
  int bupy = 0;
  int buprightx = 0;
  int buprighty = 0;
  int brightx = 0;
  int brighty = 0;
  int bdownrightx = 0;
  int bdownrighty = 0;
  int bdownx = 0;
  int bdowny = 0;
  int bdownleftx = 0;
  int bdownlefty = 0;
  int bleftx = 0;
  int blefty = 0;
  int bupleftx = 0;
  int buplefty = 0;
  int results = 0;

  while (quit) {
    // Get Button and analog stick
    get_button();

    switch (startscreen)
    {
      case 1:
        {
          display.clearDisplay();
          oledPrint("Button Test", CENTER, 0);
          display.drawLine(22 + 0, 10, 22 + 84, 10, WHITE);

          // Print Button
          printSTR("       " + button + "       ", CENTER, 20);

          // Print Stick X Value
          String stickx = String("X: " + String(N64_status.stick_x, DEC) + "   ");
          printSTR(stickx, 22 + 0, 38);

          // Print Stick Y Value
          String sticky = String("Y: " + String(N64_status.stick_y, DEC) + "   ");
          printSTR(sticky, 22 + 60, 38);

          printSTR("(Continue with START)", 0, 55);
          //Update LCD
          display.display();

          // go to next screen
          if (button == "Press a button" && lastbutton == "START")
          {
            // reset button
            lastbutton = "N/A";

            display.clearDisplay();
            if (startscreen != 4)
              startscreen = startscreen + 1;
            else
            {
              startscreen = 1;
              test = 1;
            }
          }
          else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
          {
            // Quit
            quit = 0;
          }
          break;
        }
      case 2:
        {
          oledPrint("Range Test", CENTER, 55);
          display.drawLine(22 + 0, 50, 22 + 84, 50, WHITE);

          // Print Stick X Value
          String stickx = String("X:" + String(N64_status.stick_x, DEC) + "   ");
          printSTR(stickx, 22 + 54, 8);

          // Print Stick Y Value
          String sticky = String("Y:" + String(N64_status.stick_y, DEC) + "   ");
          printSTR(sticky, 22 + 54, 18);

          // Draw Axis
          //display.drawLine(xax - zax, yax, xax + zax, yax, WHITE);
          //display.drawLine(xax, yax - zax, xax, yax + zax, WHITE);
          display.drawPixel(xax, yax, WHITE);
          display.drawPixel(xax, yax - 80 / 4, WHITE);
          display.drawPixel(xax, yax + 80 / 4, WHITE);
          display.drawPixel(xax + 80 / 4, yax, WHITE);
          display.drawPixel(xax - 80 / 4, yax, WHITE);

          // Draw corners
          display.drawPixel(xax - 68 / 4, yax - 68 / 4, WHITE);
          display.drawPixel(xax + 68 / 4, yax + 68 / 4, WHITE);
          display.drawPixel(xax + 68 / 4, yax - 68 / 4, WHITE);
          display.drawPixel(xax - 68 / 4, yax + 68 / 4, WHITE);

          //Draw Analog Stick
          if (mode == 1)
          {
            display.drawPixel(xax + N64_status.stick_x / 4, yax - N64_status.stick_y / 4, WHITE);
            //Update LCD
            display.display();
          }
          else
          {
            display.drawCircle(xax + N64_status.stick_x / 4, yax - N64_status.stick_y / 4, 2, WHITE);
            //Update LCD
            display.display();
            display.clearDisplay();
          }

          // switch mode
          if (button == "Press a button" && lastbutton == "Z")
          {
            if (mode == 0)
            {
              mode = 1;
              display.clearDisplay();
            }
            else
            {
              mode = 0;
              display.clearDisplay();
            }
          }
          // go to next screen
          if (button == "Press a button" && lastbutton == "START")
          {
            // reset button
            lastbutton = "N/A";

            display.clearDisplay();
            if (startscreen != 4)
              startscreen = startscreen + 1;
            else
            {
              startscreen = 1;
              test = 1;
            }
          }
          else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
          {
            // Quit
            quit = 0;
          }
          break;
        }
      case 3:
        {
          display.drawPixel(22 + prevStickX, 40, BLACK);
          oledPrint("Skipping Test", CENTER, 0);
          display.drawLine(22 + 0, 10, 22 + 83, 10, WHITE);
          display.drawRect(22 + 0, 15, 22 + 59, 21, WHITE);
          if (N64_status.stick_x > 0) {
            display.drawLine(22 + N64_status.stick_x, 15, 22 + N64_status.stick_x, 35, WHITE);
            display.drawPixel(22 + N64_status.stick_x, 40, WHITE);
            prevStickX = N64_status.stick_x;
          }

          printSTR("Try to fill box by", 0, 45);
          printSTR("slowly moving right", 0, 55);
          //Update LCD
          display.display();

          if (button == "Press a button" && lastbutton == "Z")
          {
            // reset button
            lastbutton = "N/A";

            display.clearDisplay();
          }
          // go to next screen
          if (button == "Press a button" && lastbutton == "START")
          {
            // reset button
            lastbutton = "N/A";

            display.clearDisplay();
            if (startscreen != 4)
              startscreen = startscreen + 1;
            else
            {
              startscreen = 1;
              test = 1;
            }
          }
          else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
          {
            // Quit
            quit = 0;
          }
          break;
        }
      case 4:
        {
          switch ( test )
          {
            case 0:  // Display results
              {
                switch (results)
                {
                  case 0:
                    {
                      anastick = "YOURS";
                      upx = bupx;
                      upy = bupy;
                      uprightx = buprightx;
                      uprighty = buprighty;
                      rightx = brightx;
                      righty = brighty;
                      downrightx = bdownrightx;
                      downrighty = bdownrighty;
                      downx = bdownx;
                      downy = bdowny;
                      downleftx = bdownleftx;
                      downlefty = bdownlefty;
                      leftx = bleftx;
                      lefty = blefty;
                      upleftx = bupleftx;
                      uplefty = buplefty;

                      if (button == "Press a button" && lastbutton == "A")
                      {
                        // reset button
                        lastbutton = "N/A";
                        results = 1;
                      }

                      break;
                    }
                  case 1:
                    {
                      anastick = "ORIG";
                      upx = 1;
                      upy = 84;
                      uprightx = 67;
                      uprighty = 68;
                      rightx = 83;
                      righty = -2;
                      downrightx = 67;
                      downrighty = -69;
                      downx = 3;
                      downy = -85;
                      downleftx = -69;
                      downlefty = -70;
                      leftx = -85;
                      lefty = 0;
                      upleftx = -68;
                      uplefty = 68;

                      if (button == "Press a button" && lastbutton == "A")
                      {
                        // reset button
                        lastbutton = "N/A";
                        results = 0;
                      }
                      break;
                    }

                } //results
                display.clearDisplay();

                printSTR(anastick, 22 + 50, 0);

                oledPrint("U:", 22 + 50, 10);
                oledPrint(upy, 100, 10);
                oledPrint("D:", 22 + 50, 20);
                oledPrint(downy, 100, 20);
                oledPrint("L:", 22 + 50, 30);
                oledPrint(leftx, 100, 30);
                oledPrint("R:", 22 + 50, 40);
                oledPrint(rightx, 100, 40);

                display.drawLine(xax + upx / 4, yax - upy / 4, xax + uprightx / 4, yax - uprighty / 4, WHITE);
                display.drawLine(xax + uprightx / 4, yax - uprighty / 4, xax + rightx / 4, yax - righty / 4, WHITE);
                display.drawLine(xax + rightx / 4, yax - righty / 4, xax + downrightx / 4, yax - downrighty / 4, WHITE);
                display.drawLine(xax + downrightx / 4, yax - downrighty / 4, xax + downx / 4, yax - downy / 4, WHITE);
                display.drawLine(xax + downx / 4, yax - downy / 4, xax + downleftx / 4, yax - downlefty / 4, WHITE);
                display.drawLine(xax + downleftx / 4, yax - downlefty / 4, xax + leftx / 4, yax - lefty / 4, WHITE);
                display.drawLine(xax + leftx / 4, yax - lefty / 4, xax + upleftx / 4, yax - uplefty / 4, WHITE);
                display.drawLine(xax + upleftx / 4, yax - uplefty / 4, xax + upx / 4, yax - upy / 4, WHITE);

                display.drawPixel(xax, yax, WHITE);

                printSTR("(Quit with Z)", 25, 55);
                //Update LCD
                display.display();
                break;
              } //display results

            case 1:// +y Up
              {
                oledPrint("Hold Stick Up", CENTER, 18);
                oledPrint("then press A", CENTER, 28);
                //myOLED.drawBitmap(110, 60, ana1);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bupx = N64_status.stick_x;
                  bupy = N64_status.stick_y;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                  test = 2;
                }
                break;
              }

            case 2:// +y+x Up-Right
              {
                oledPrint("Up-Right", CENTER, 22 );
                //myOLED.drawBitmap(110, 60, ana2);

                if (button == "Press a button" && lastbutton == "A")
                {
                  buprightx = N64_status.stick_x;
                  buprighty = N64_status.stick_y;
                  test = 3;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 3:// +x Right
              {
                oledPrint("Right", CENTER, 22 );
                //myOLED.drawBitmap(110, 60, ana3);

                if (button == "Press a button" && lastbutton == "A")
                {
                  brightx = N64_status.stick_x;
                  brighty = N64_status.stick_y;
                  test = 4;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 4:// -y+x Down-Right
              {
                oledPrint("Down-Right", CENTER, 22 );
                //myOLED.drawBitmap(110, 60, ana4);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bdownrightx = N64_status.stick_x;
                  bdownrighty = N64_status.stick_y;
                  test = 5;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 5:// -y Down
              {
                oledPrint("Down", CENTER, 22 );
                //myOLED.drawBitmap(110, 60, ana5);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bdownx = N64_status.stick_x;
                  bdowny = N64_status.stick_y;
                  test = 6;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 6:// -y-x Down-Left
              {
                oledPrint("Down-Left", CENTER, 22 );
                //myOLED.drawBitmap(110, 60, ana6);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bdownleftx = N64_status.stick_x;
                  bdownlefty = N64_status.stick_y;
                  test = 7;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 7:// -x Left
              {
                oledPrint("Left", CENTER, 22 );
                //myOLED.drawBitmap(110, 60, ana7);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bleftx = N64_status.stick_x;
                  blefty = N64_status.stick_y;
                  test = 8;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }

            case 8:// +y+x Up-Left
              {
                oledPrint("Up-Left", CENTER, 22);
                //myOLED.drawBitmap(110, 60, ana8);

                if (button == "Press a button" && lastbutton == "A")
                {
                  bupleftx = N64_status.stick_x;
                  buplefty = N64_status.stick_y;
                  test = 0;
                  // reset button
                  lastbutton = "N/A";

                  display.clearDisplay();
                }
                break;
              }
          }
          if (test != 0)
          {
            oledPrint("Benchmark", CENTER, 0);
            display.drawLine(22 + 0, 9, 22 + 83, 9, WHITE);
            printSTR("(Quit with Z)", 25, 55);
          }
          display.display();
          // go to next screen
          if (button == "Press a button" && lastbutton == "START")
          {
            // reset button
            lastbutton = "N/A";

            display.clearDisplay();
            if (startscreen != 4)
              startscreen = startscreen + 1;
            else
            {
              startscreen = 1;
              test = 1;
            }
          }
          else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
          {
            // Quit
            quit = 0;
          }
          break;
        }
    }
  }
}
#endif

/******************************************
   N64 Controller Pak Functions
   (connected via Controller)
 *****************************************/
// Reset the controller
void resetController() {
  // Reset controller
  unsigned char command[] = {0xFF};
  // don't want interrupts getting in the way
  noInterrupts();
  // Send command
  N64_send(command, 1);
  // Send stop
  N64_stop();
  // Enable interrupts
  interrupts();
  delay(100);
}

// read 3 bytes from controller
void checkController() {
  display_Clear();

  // Check if line is HIGH
  if (!N64_QUERY)
    print_Error(F("Data line LOW"), true);

  // Send status command
  unsigned char command[] = {0x0};

  // Empty buffer
  for (word i = 0; i < 265; i++) {
    N64_raw_dump[i] = 0xFF;
  }

  // don't want interrupts getting in the way
  noInterrupts();
  N64_send(command, 1);
  N64_stop();
  // read in data
  N64_get(32);
  // end of time sensitive code
  interrupts();

  // Empty N64_raw_dump into myBlock
  for (word i = 0; i < 32; i += 8) {
    boolean byteFlipped[9];

    // Flip byte order
    byteFlipped[0] = N64_raw_dump[i + 7];
    byteFlipped[1] = N64_raw_dump[i + 6];
    byteFlipped[2] = N64_raw_dump[i + 5];
    byteFlipped[3] = N64_raw_dump[i + 4];
    byteFlipped[4] = N64_raw_dump[i + 3];
    byteFlipped[5] = N64_raw_dump[i + 2];
    byteFlipped[6] = N64_raw_dump[i + 1];
    byteFlipped[7] = N64_raw_dump[i + 0];

    // Join bits into one byte
    unsigned char myByte = 0;
    for (byte j = 0; j < 8; ++j) {
      if (byteFlipped[j]) {
        myByte |= 1 << j;
      }
    }
    if ((i == 0) && (myByte != 0x05))
      print_Error(F("Controller not found"), true);
    if ((i == 16) && (myByte != 0x01))
      print_Error(F("Controller Pak not found"), true);
    if ((i == 16) && (myByte == 0x04))
      print_Error(F("CRC Error"), true);
  }
}

// read 32bytes from controller pak and calculate CRC
byte readBlock(word myAddress) {
  // Calculate the address CRC
  word myAddressCRC = addrCRC(myAddress);

  // Read Controller Pak command
  unsigned char command[] = {0x02};
  // Address Command
  unsigned char addressHigh[] = {(unsigned char)(myAddressCRC >> 8)};
  unsigned char addressLow[] = {(unsigned char)(myAddressCRC & 0xff)};

  // Empty buffer
  for (word i = 0; i < 265; i++) {
    N64_raw_dump[i] = 0xFF;
  }

  // don't want interrupts getting in the way
  noInterrupts();
  // send those 3 bytes
  N64_send(command, 1);
  N64_send(addressHigh, 1);
  N64_send(addressLow, 1);
  N64_stop();
  // read in 32 byte data + 1 byte crc
  N64_get(264);
  // end of time sensitive code
  interrupts();

  // Empty N64_raw_dump into myBlock
  for (word i = 0; i < 256; i += 8) {
    boolean byteFlipped[9];

    // Flip byte order
    byteFlipped[0] = N64_raw_dump[i + 7];
    byteFlipped[1] = N64_raw_dump[i + 6];
    byteFlipped[2] = N64_raw_dump[i + 5];
    byteFlipped[3] = N64_raw_dump[i + 4];
    byteFlipped[4] = N64_raw_dump[i + 3];
    byteFlipped[5] = N64_raw_dump[i + 2];
    byteFlipped[6] = N64_raw_dump[i + 1];
    byteFlipped[7] = N64_raw_dump[i + 0];

    // Join bits into one byte
    unsigned char myByte = 0;
    for (byte j = 0; j < 8; ++j) {
      if (byteFlipped[j]) {
        myByte |= 1 << j;
      }
    }
    // Save byte into block array
    myBlock[i / 8] = myByte;
  }

  // Get CRC of block send
  boolean byteFlipped[9];
  // Flip byte order
  byteFlipped[0] = N64_raw_dump[256 + 7];
  byteFlipped[1] = N64_raw_dump[256 + 6];
  byteFlipped[2] = N64_raw_dump[256 + 5];
  byteFlipped[3] = N64_raw_dump[256 + 4];
  byteFlipped[4] = N64_raw_dump[256 + 3];
  byteFlipped[5] = N64_raw_dump[256 + 2];
  byteFlipped[6] = N64_raw_dump[256 + 1];
  byteFlipped[7] = N64_raw_dump[256 + 0];

  unsigned char blockCRC = 0;
  for (byte k = 0; k < 8; ++k) {
    if (byteFlipped[k]) {
      blockCRC |= 1 << k;
    }
  }

  // Calculate CRC of block received
  unsigned char myCRC = dataCRC(&myBlock[0]);

  // Compare
  if (blockCRC != myCRC) {
    display_Clear();
    // Close the file:
    myFile.close();
    println_Msg(F("Controller Pak was"));
    println_Msg(F("not dumped due to a"));
    print_Error(F("protocol CRC error"), true);
  }

  return blockCRC;
}

// reads the MPK file to the sd card
void readMPK() {
  // Change to root
  sd.chdir("/");
  // Make MPK directory
  sd.mkdir("N64/MPK", true);
  // Change to MPK directory
  sd.chdir("N64/MPK");

  // Get name, add extension and convert to char array for sd lib
  EEPROM_readAnything(0, foldern);
  sprintf(fileName, "%d", foldern);
  strcat(fileName, ".mpk");

  // write new folder number back to eeprom
  foldern = foldern + 1;
  EEPROM_writeAnything(0, foldern);

  //open crc file on sd card
  sprintf(filePath, "%d", foldern - 1);
  strcat(filePath, ".crc");
  FsFile crcFile;
  if (!crcFile.open(filePath, O_RDWR | O_CREAT)) {
    print_Error(F("Can't open file on SD"), true);
  }

  //open mpk file on sd card
  if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
    print_Error(F("Can't open file on SD"), true);
  }

  print_Msg(F("Saving N64/MPK/"));
  println_Msg(fileName);
  display_Update();

  // Dummy write because first write to file takes 1 second and messes up timing
  blinkLED();
  myFile.write(0xFF);
  myFile.rewind();
  blinkLED();

  //Initialize progress bar
  uint32_t processedProgressBar = 0;
  uint32_t totalProgressBar = (uint32_t)(0x7FFF);
  draw_progressbar(0, totalProgressBar);

  // Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
  // Read 512 byte into sdBuffer
  for (word currSdBuffer = 0x0000; currSdBuffer < 0x8000; currSdBuffer += 512) {
    // Read 32 byte block
    for (word currBlock = 0; currBlock < 512; currBlock += 32) {
      // Read one block of the Controller Pak into array myBlock and write CRC of that block to crc file
      crcFile.write(readBlock(currSdBuffer + currBlock));

      // Copy block to SdBuffer
      for (byte currByte = 0; currByte < 32; currByte++) {
        sdBuffer[currBlock + currByte] = myBlock[currByte];
      }

      // Real N64 has about 627us pause between banks, add a bit extra delay
      if (currBlock < 479)
        delayMicroseconds(800);
    }
    // This will take 1300us
    blinkLED();
    myFile.write(sdBuffer, 512);
    // Blink led
    blinkLED();
    // Update progress bar
    processedProgressBar += 512;
    draw_progressbar(processedProgressBar, totalProgressBar);
  }
  // Close the file:
  myFile.close();
  crcFile.close();
}

// verifies if read was successful
void verifyCRC() {
  writeErrors = 0;

  println_Msg(F("Verifying..."));
  display_Update();

  //open CRC file on sd card
  FsFile crcFile;
  if (!crcFile.open(filePath, O_READ)) {
    print_Error(F("Can't open file on SD"), true);
  }

  //open MPK file on sd card
  if (!myFile.open(fileName, O_READ)) {
    print_Error(F("Can't open file on SD"), true);
  }

  //Initialize progress bar
  uint32_t processedProgressBar = 0;
  uint32_t totalProgressBar = (uint32_t)(0x7FFF);
  draw_progressbar(0, totalProgressBar);

  // Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
  for (word currSdBuffer = 0x0000; currSdBuffer < 0x8000; currSdBuffer += 512) {
    // Read 32 bytes into SD buffer
    myFile.read(sdBuffer, 512);

    // Compare 32 byte block CRC to CRC from file
    for (word currBlock = 0; currBlock < 512; currBlock += 32) {
      // Calculate CRC of block and compare against crc file
      if (dataCRC(&sdBuffer[currBlock]) != crcFile.read())
        writeErrors++;
    }

    // Blink led
    blinkLED();
    // Update progress bar
    processedProgressBar += 512;
    draw_progressbar(processedProgressBar, totalProgressBar);
  }
  // Close the file:
  myFile.close();
  crcFile.close();

  if (writeErrors == 0) {
    println_Msg(F("Read successfully"));
    display_Update();
  }
  else {
    print_Msg(F("Error: "));
    print_Msg(writeErrors);
    println_Msg(F(" blocks "));
    print_Error(F("did not verify."), false);
  }
}

// Calculates the checksum of the header
boolean checkHeader(byte startAddress) {
  word sum = 0;

  // first 28 bytes are the header, then comes the checksum(word) followed by the reverse checksum(0xFFF2 - checksum)
  for (int i = 0; i < 28; i += 2) {
    word tempword = (((sdBuffer[startAddress + i] & 0xFF) << 8) | (sdBuffer[startAddress + i + 1] & 0xFF));
    sum += tempword;
  }

  if ((((sdBuffer[startAddress + 28] & 0xFF) << 8) | (sdBuffer[startAddress + 29] & 0xFF)) != (sum & 0xFFFF)) {
    return 0;
  }
  else {
    return 1;
  }
}

// verifies if Controller Pak holds valid header data
void validateMPK() {
  //open file on sd card
  if (!myFile.open(fileName, O_READ)) {
    print_Error(F("Can't open file"), true);
  }

  // Read first 256 byte which contains the header including checksum and reverse checksum and three copies of it
  myFile.read(sdBuffer, 256);

  //Check all four header copies
  writeErrors = 0;
  if (!checkHeader(0x20))
    writeErrors++;
  if (!checkHeader(0x60))
    writeErrors++;
  if (!checkHeader(0x80))
    writeErrors++;
  if (!checkHeader(0xC0))
    writeErrors++;

  print_Msg(F("HDR: "));
  print_Msg(4 - writeErrors);
  print_Msg(F("/4 - "));
  display_Update();

  // Check both TOC copies
  writeErrors = 0;
  word sum = 0;

  // Read 2nd and 3rd 256 byte page with TOC info
  for (word currSdBuffer = 0x100; currSdBuffer < 0x300; currSdBuffer += 256) {
    sum = 0;

    // Read 256 bytes into SD buffer
    myFile.read(sdBuffer, 256);

    // Calculate TOC checksum
    for (int i = 5; i < 128; i++ ) {
      sum += sdBuffer[(i << 1) + 1];
    }
    if (sdBuffer[1] != (sum & 0xFF))
      writeErrors++;
  }
  print_Msg(F("ToC: "));
  print_Msg(2 - writeErrors);
  println_Msg(F("/2"));
  display_Update();

  // Close the file:
  myFile.close();
}

void writeMPK() {
  // Create filepath
  sprintf(filePath, "%s/%s", filePath, fileName);
  print_Msg(F("Writing "));
  print_Msg(filePath);
  println_Msg(F("..."));
  display_Update();

  // Open file on sd card
  if (myFile.open(filePath, O_READ)) {

    //Initialize progress bar
    uint32_t processedProgressBar = 0;
    uint32_t totalProgressBar = (uint32_t)(0x7FFF);
    draw_progressbar(0, totalProgressBar);

    for (word currSdBuffer = 0x0000; currSdBuffer < 0x8000; currSdBuffer += 512) {
      // Read 512 bytes into SD buffer, takes 1500us
      myFile.read(sdBuffer, 512);

      // Write 32 byte block
      for (word currBlock = 0; currBlock < 512; currBlock += 32) {
        // Calculate the address CRC
        word myAddressCRC = addrCRC(currSdBuffer + currBlock);

        // Copy 32 byte block from SdBuffer
        for (byte currByte = 0; currByte < 32; currByte++) {
          myBlock[currByte] = sdBuffer[currBlock + currByte] ;
        }

        // Write Controller Pak command
        unsigned char command[] = {0x03};
        // Address Command
        unsigned char addressHigh[] = {(unsigned char)(myAddressCRC >> 8)};
        unsigned char addressLow[] = {(unsigned char)(myAddressCRC & 0xff)};

        // don't want interrupts getting in the way
        noInterrupts();
        // Send write command
        N64_send(command, 1);
        // Send block number
        N64_send(addressHigh, 1);
        N64_send(addressLow, 1);
        // Send data to write
        N64_send(myBlock, 32);
        // Send stop
        N64_stop();
        // Enable interrupts
        interrupts();

        // Real N64 has about 627us pause between banks, add a bit extra delay
        if (currBlock < 479)
          delayMicroseconds(1500);
      }

      // Blink led
      blinkLED();
      // Update progress bar
      processedProgressBar += 512;
      draw_progressbar(processedProgressBar, totalProgressBar);
    }
    // Close the file:
    myFile.close();
  }
  else {
    print_Error(F("Can't open file on SD"), true);
  }
}

// verifies if write was successful
void verifyMPK() {
  writeErrors = 0;

  println_Msg(F("Verifying..."));
  display_Update();

  //open file on sd card
  if (!myFile.open(filePath, O_READ)) {
    print_Error(F("Can't open file on SD"), true);
  }

  //Initialize progress bar
  uint32_t processedProgressBar = 0;
  uint32_t totalProgressBar = (uint32_t)(0x7FFF);
  draw_progressbar(0, totalProgressBar);

  // Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
  for (word currSdBuffer = 0x0000; currSdBuffer < 0x8000; currSdBuffer += 512) {
    // Read 512 bytes into SD buffer
    myFile.read(sdBuffer, 512);

    // Compare 32 byte block
    for (word currBlock = 0; currBlock < 512; currBlock += 32) {
      // Read one block of the Controller Pak into array myBlock
      readBlock(currSdBuffer + currBlock);

      // Check against file on SD card
      for (byte currByte = 0; currByte < 32; currByte++) {
        if (sdBuffer[currBlock + currByte] != myBlock[currByte]) {
          writeErrors++;
        }
      }
      // Real N64 has about 627us pause between banks, add a bit extra delay
      if (currBlock < 479)
        delayMicroseconds(1500);
    }

    // Blink led
    blinkLED();
    // Update progress bar
    processedProgressBar += 512;
    draw_progressbar(processedProgressBar, totalProgressBar);
  }

  // Close the file:
  myFile.close();
  if (writeErrors == 0) {
    println_Msg(F("Written successfully"));
    display_Update();
  }
  else {
    print_Msg(F("Error: "));
    print_Msg(writeErrors);
    println_Msg(F(" bytes "));
    print_Error(F("did not verify."), false);
  }
}

/******************************************
  N64 Cartridge functions
*****************************************/
void printCartInfo_N64() {
  // Check cart
  getCartInfo_N64();

  // Print start page
  if (cartSize != 0) {
    display_Clear();
    print_Msg(F("Title: "));
    println_Msg(romName);
    print_Msg(F("Code: "));
    println_Msg(cartID);
    print_Msg(F("Revision: "));
    println_Msg(romVersion);
    print_Msg(F("ROM Size: "));
    print_Msg(cartSize);
    println_Msg(F(" MB"));
    print_Msg(F("Save Type: "));
    switch (saveType) {
      case 1:
        println_Msg(F("SRAM"));
        break;
      case 4:
        println_Msg(F("FLASH"));
        break;
      case 5:
        println_Msg(F("4K EEPROM"));
        eepPages = 64;
        break;
      case 6:
        println_Msg(F("16K EEPROM"));
        eepPages = 256;
        break;
      default:
        println_Msg(F("None/Unknown"));
        break;
    }

    print_Msg(F("CRC1: "));
    println_Msg(checksumStr);

    // Wait for user input
    println_Msg(F(" "));
    println_Msg(F("Press Button..."));
    display_Update();
    wait();
  }
  else {
    // Display error
    display_Clear();
    println_Msg(F("GAMEPAK ERROR"));
    println_Msg("");
    print_Msg(F("Title: "));
    println_Msg(romName);
    print_Msg(F("Code: "));
    println_Msg(cartID);
    print_Msg(F("CRC1: "));
    println_Msg(checksumStr);
    display_Update();

    strcpy(romName, "GPERROR");
    print_Error(F("Cartridge unknown"), false);
    println_Msg("");
    println_Msg(F("Press Button..."));
    display_Update();
    wait();

    // Set cartsize manually
    unsigned char N64RomMenu;
    // Copy menuOptions out of progmem
    convertPgm(romOptionsN64, 6);
    N64RomMenu = question_box(F("Select ROM size"), menuOptions, 6, 0);

    // wait for user choice to come back from the question box menu
    switch (N64RomMenu)
    {
      case 0:
        // 4MB
        cartSize = 4;
        break;

      case 1:
        // 8MB
        cartSize = 8;
        break;

      case 2:
        // 12MB
        cartSize = 12;
        break;

      case 3:
        // 16MB
        cartSize = 16;
        break;

      case 4:
        // 32MB
        cartSize = 32;
        break;

      case 5:
        // 64MB
        cartSize = 64;
        break;
    }
  }
}

// improved strcmp function that ignores case to prevent checksum comparison issues
int strcicmp(char const * a, char const * b)
{
  for (;; a++, b++) {
    int d = tolower((unsigned char) * a) - tolower((unsigned char) * b);
    if (d != 0 || !*a)
      return d;
  }
}

/* look-up the calculated crc in the file n64.txt on sd card
  boolean searchCRC(char crcStr[9]) {
  boolean result = 0;
  char tempStr2[2];
  char tempStr1[9];
  char tempStr[5];

  // Change to root dir
  sd.chdir("/");

  if (myFile.open("n64.txt", O_READ)) {
    // Loop through file
    while (myFile.available()) {
      // Read 8 bytes into String, do it one at a time so byte order doesn't get mixed up
      sprintf(tempStr1, "%c", myFile.read());
      for (byte i = 0; i < 7; i++) {
        sprintf(tempStr2, "%c", myFile.read());
        strcat(tempStr1, tempStr2);
      }

      // Check if string is a match
      if (strcicmp(tempStr1, crcStr) == 0) {
        // Skip the , in the file
        myFile.seekSet(myFile.curPosition() + 1);

        // Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up
        sprintf(tempStr, "%c", myFile.read());
        for (byte i = 0; i < 3; i++) {
          sprintf(tempStr2, "%c", myFile.read());
          strcat(tempStr, tempStr2);
        }

        if (strcmp(tempStr, cartID) == 0) {
          result = 1;
          break;
        }
        else {
          result = 0;
          break;
        }
      }
      // If no match, empty string, advance by 12 and try again
      else {
        myFile.seekSet(myFile.curPosition() + 12);
      }
    }
    // Close the file:
    myFile.close();
    return result;
  }
  else {
    print_Error(F("n64.txt missing"), true);
  }
  }*/

// look-up cart id in file n64.txt on sd card
void getCartInfo_N64() {
  char tempStr2[2];
  char tempStr[9];

  // cart not in list
  cartSize = 0;
  saveType = 0;

  // Read cart id
  idCart();

  display_Clear();
  println_Msg(F("Searching database..."));
  display_Update();

  if (myFile.open("n64.txt", O_READ)) {
    // Loop through file
    while (myFile.available()) {
      // Skip first line with name
      skip_line(&myFile);

      // Skip over the CRC32 checksum
      myFile.seekSet(myFile.curPosition() + 9);

      // Read 8 bytes into String, do it one at a time so byte order doesn't get mixed up
      sprintf(tempStr, "%c", myFile.read());
      for (byte i = 0; i < 7; i++) {
        sprintf(tempStr2, "%c", myFile.read());
        strcat(tempStr, tempStr2);
      }

      // Check if string is a match
      if (strcmp(tempStr, checksumStr) == 0) {
        // Skip the , in the file
        myFile.seekSet(myFile.curPosition() + 1);

        // Read the next ascii character and subtract 48 to convert to decimal
        cartSize = myFile.read() - 48;
        // Remove leading 0 for single digit cart sizes
        if (cartSize != 0) {
          cartSize = cartSize * 10 +  myFile.read() - 48;
        }
        else {
          cartSize = myFile.read() - 48;
        }

        // Skip the , in the file
        myFile.seekSet(myFile.curPosition() + 1);

        // Read the next ascii character and subtract 48 to convert to decimal
        saveType = myFile.read() - 48;

        // End loop
        break;
      }
      // If no match skip to next entry
      else {
        // skip rest of line
        myFile.seekSet(myFile.curPosition() + 7);
        // skip third empty line
        skip_line(&myFile);
      }
    }
    // Close the file:
    myFile.close();
  }
  else {
    print_Error(F("n64.txt missing"), true);
  }
}

// Read rom ID
void idCart() {
  // Set the address
  setAddress_N64(romBase);
  // Read first 64 bytes of rom
  for (int c = 0; c < 64; c += 2) {
    // split word
    word myWord = readWord_N64();
    byte loByte = myWord & 0xFF;
    byte hiByte = myWord >> 8;

    // write to buffer
    sdBuffer[c] = hiByte;
    sdBuffer[c + 1] = loByte;
  }

  // CRC1
  sprintf(checksumStr, "%02X%02X%02X%02X", sdBuffer[0x10], sdBuffer[0x11], sdBuffer[0x12], sdBuffer[0x13]);

  // Get cart id
  cartID[0] = sdBuffer[0x3B];
  cartID[1] = sdBuffer[0x3C];
  cartID[2] = sdBuffer[0x3D];
  cartID[3] = sdBuffer[0x3E];

  // Get rom version
  romVersion = sdBuffer[0x3F];

  // Get name
  byte myByte = 0;
  byte myLength = 0;
  for (unsigned int i = 0; i < 20; i++) {
    myByte = sdBuffer[0x20 + i];
    if (isprint(myByte) && myByte != '<' && myByte != '>' && myByte != ':' && myByte != '"' && myByte != '/' && myByte != '\\' && myByte != '|' && myByte != '?' && myByte != '*') {
      romName[myLength] = char(myByte);
    } else {
      if (romName[myLength - 1] == 0x5F) myLength--;
      romName[myLength] = 0x5F;
    }
    myLength++;
  }

  // Strip trailing white space
  for (unsigned int i = myLength - 1; i > 0; i--) {
    if ((romName[i] != 0x5F) && (romName[i] != 0x20)) break;
    romName[i] = 0x00;
    myLength--;
  }

  // If name consists out of all japanese characters use cart id
  if (myLength == 0) {
    romName[0] = sdBuffer[0x3B];
    romName[1] = sdBuffer[0x3C];
    romName[2] = sdBuffer[0x3D];
    romName[3] = sdBuffer[0x3E];
  }

#ifdef savesummarytotxt
  // Get CRC1
  for (int i = 0; i < 4; i++) {
    if (sdBuffer[0x10 + i] < 0x10) {
      CRC1 += '0';
    }
    CRC1 += String(sdBuffer[0x10 + i], HEX);
  }

  // Get CRC2
  for (int i = 0; i < 4; i++) {
    if (sdBuffer[0x14 + i] < 0x10) {
      CRC2 += '0';
    }
    CRC2 += String(sdBuffer[0x14 + i], HEX);
  }
#endif
}

/******************************************
  Eeprom functions (without Adafruit clockgen)
*****************************************/
// Send a clock pulse of 2us length, 50% duty, 500kHz
void pulseClock_N64(unsigned int times) {
  for (unsigned int i = 0; i < (times * 2); i++) {
    // Switch the clock pin to 0 if it's 1 and 0 if it's 1
    PORTH ^= (1 << 1);
    // without the delay the clock pulse would be 1.5us and 666kHz
    //__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"));
  }
}

// Send one byte of data to eeprom
void sendData_CLK(byte data) {
  for (byte i = 0; i < 8; i++) {
    // pull data line low
    N64_LOW;

    // if current bit is 1, pull high after ~1us, 2 cycles
    if (data >> 7) {
      pulseClock_N64(2);
      N64_HIGH;
      pulseClock_N64(6);
    }
    // if current bit is 0 pull high after ~3us, 6 cycles
    else {
      pulseClock_N64(6);
      N64_HIGH;
      pulseClock_N64(2);
    }

    // rotate to the next bit
    data <<= 1;
  }
}

// Send stop bit to eeprom
void sendStop_CLK() {
  N64_LOW;
  pulseClock_N64(2);
  N64_HIGH;
  pulseClock_N64(4);
}

// Capture 8 bytes in 64 bits into bit array tempBits
void readData_CLK() {
  for (byte i = 0; i < 64; i++) {

    // pulse clock until we get response from eeprom
    while (N64_QUERY) {
      pulseClock_N64(1);
    }

    // Skip over the 1us low part of a high bit
    pulseClock_N64(3);

    // Read bit
    tempBits[i] = N64_QUERY;

    // wait for line to go high again
    while (!N64_QUERY) {
      pulseClock_N64(1);
    }
  }
}

// Write Eeprom to cartridge
void writeEeprom_CLK() {
  if ((saveType == 5) || (saveType == 6)) {

    // Create filepath
    sprintf(filePath, "%s/%s", filePath, fileName);
    println_Msg(F("Writing..."));
    println_Msg(filePath);
    display_Update();

    // Open file on sd card
    if (myFile.open(filePath, O_READ)) {

      for (byte i = 0; i < (eepPages / 64); i++) {
        myFile.read(sdBuffer, 512);
        // Disable interrupts for more uniform clock pulses
        noInterrupts();

        for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
          // Blink led
          blinkLED();

          // Wait ~50ms between page writes or eeprom will have write errors
          pulseClock_N64(26000);

          // Send write command
          sendData_CLK(0x05);
          // Send page number
          sendData_CLK(pageNumber + (i * 64));
          // Send data to write
          for (byte j = 0; j < 8; j++) {
            sendData_CLK(sdBuffer[(pageNumber * 8) + j]);
          }
          sendStop_CLK();
        }
        interrupts();
      }

      // Close the file:
      myFile.close();
      println_Msg(F("Done"));
      display_Update();
      delay(600);
    }
    else {
      print_Error(F("SD Error"), true);
    }
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Dump Eeprom to SD
void readEeprom_CLK() {
  if ((saveType == 5) || (saveType == 6)) {

    // Wait 50ms or eeprom might lock up
    pulseClock_N64(26000);

    // Get name, add extension and convert to char array for sd lib
    strcpy(fileName, romName);
    strcat(fileName, ".eep");

    // create a new folder for the save file
    EEPROM_readAnything(0, foldern);
    sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
    sd.mkdir(folder, true);
    sd.chdir(folder);

    // write new folder number back to eeprom
    foldern = foldern + 1;
    EEPROM_writeAnything(0, foldern);

    // Open file on sd card
    if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
      print_Error(F("Can't create file on SD"), true);
    }

    for (byte i = 0; i < (eepPages / 64); i++) {
      // Disable interrupts for more uniform clock pulses
      noInterrupts();

      for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
        // Blink led
        blinkLED();

        // Send read command
        sendData_CLK(0x04);
        // Send Page number
        sendData_CLK(pageNumber + (i * 64));
        // Send stop bit
        sendStop_CLK();

        // read data
        readData_CLK();
        sendStop_CLK();

        // OR 8 bits into one byte for a total of 8 bytes
        for (byte j = 0; j < 64; j += 8) {
          sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
        }
        // Wait 50ms between pages or eeprom might lock up
        pulseClock_N64(26000);
      }
      interrupts();

      // Write 64 pages at once to the SD card
      myFile.write(sdBuffer, 512);
    }
    // Close the file:
    myFile.close();
    //clear the screen
    display_Clear();
    print_Msg(F("Saved to "));
    print_Msg(folder);
    println_Msg(F("/"));
    display_Update();
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Check if a write succeeded, returns 0 if all is ok and number of errors if not
unsigned long verifyEeprom_CLK() {
  if ((saveType == 5) || (saveType == 6)) {
    writeErrors = 0;

    // Wait 50ms or eeprom might lock up
    pulseClock_N64(26000);

    display_Clear();
    print_Msg(F("Verifying against "));
    println_Msg(filePath);
    display_Update();

    // Open file on sd card
    if (myFile.open(filePath, O_READ)) {

      for (byte i = 0; i < (eepPages / 64); i++) {
        // Disable interrupts for more uniform clock pulses
        noInterrupts();

        for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
          // Blink led
          blinkLED();

          // Send read command
          sendData_CLK(0x04);
          // Send Page number
          sendData_CLK(pageNumber + (i * 64));
          // Send stop bit
          sendStop_CLK();

          // read data
          readData_CLK();
          sendStop_CLK();

          // OR 8 bits into one byte for a total of 8 bytes
          for (byte j = 0; j < 64; j += 8) {
            sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
          }
          // Wait 50ms between pages or eeprom might lock up
          pulseClock_N64(26000);
        }
        interrupts();

        // Check sdBuffer content against file on sd card
        for (int c = 0; c < 512; c++) {
          if (myFile.read() != sdBuffer[c]) {
            writeErrors++;
          }
        }
      }
      // Close the file:
      myFile.close();
    }
    else {
      // SD Error
      writeErrors = 999999;
      print_Error(F("SD Error"), true);
    }
    // Return 0 if verified ok, or number of errors
    return writeErrors;
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

/******************************************
  Eeprom functions (with Adafruit clockgen)
*****************************************/
// Send one byte of data to eeprom
void sendData(byte data) {
  for (byte i = 0; i < 8; i++) {
    // pull data line low
    N64_LOW;

    // if current bit is 1, pull high after ~1us
    if (data >> 7) {
      __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
      N64_HIGH;
      __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
    }
    // if current bit is 0 pull high after ~3us
    else {
      __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
      N64_HIGH;
      __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
    }

    // rotate to the next bit
    data <<= 1;
  }
}

// Send stop bit to eeprom
void sendStop() {
  N64_LOW;
  __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
  N64_HIGH;
  __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}

// Capture 8 bytes in 64 bits into bit array tempBits
void readData() {
  for (byte i = 0; i < 64; i++) {

    // wait until we get response from eeprom
    while (N64_QUERY) {
    }

    // Skip over the 1us low part of a high bit, Arduino running at 16Mhz -> one nop = 62.5ns
    __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");

    // Read bit
    tempBits[i] = N64_QUERY;

    // wait for line to go high again
    while (!N64_QUERY) {
      __asm__("nop\n\t");
    }
  }
}

// Write Eeprom to cartridge
void writeEeprom() {
  if ((saveType == 5) || (saveType == 6)) {

    // Create filepath
    sprintf(filePath, "%s/%s", filePath, fileName);
    println_Msg(F("Writing..."));
    println_Msg(filePath);
    display_Update();

    // Open file on sd card
    if (myFile.open(filePath, O_READ)) {

      for (byte i = 0; i < (eepPages / 64); i++) {
        myFile.read(sdBuffer, 512);
        // Disable interrupts for more uniform clock pulses
        noInterrupts();

        for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
          // Blink led
          blinkLED();

          // Wait ~50ms between page writes or eeprom will have write errors, Arduino running at 16Mhz -> one nop = 62.5ns
          for (long i = 0; i < 115000; i++) {
            __asm__("nop\n\t");
          }

          // Send write command
          sendData(0x05);
          // Send page number
          sendData(pageNumber + (i * 64));
          // Send data to write
          for (byte j = 0; j < 8; j++) {
            sendData(sdBuffer[(pageNumber * 8) + j]);
          }
          sendStop();
        }
        interrupts();
      }

      // Close the file:
      myFile.close();
      println_Msg(F("Done"));
      display_Update();
      delay(600);
    }
    else {
      print_Error(F("SD Error"), true);
    }
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Dump Eeprom to SD
void readEeprom() {
  if ((saveType == 5) || (saveType == 6)) {
    // Get name, add extension and convert to char array for sd lib
    strcpy(fileName, romName);
    strcat(fileName, ".eep");

    // create a new folder for the save file
    EEPROM_readAnything(0, foldern);
    sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
    sd.mkdir(folder, true);
    sd.chdir(folder);

    // write new folder number back to eeprom
    foldern = foldern + 1;
    EEPROM_writeAnything(0, foldern);

    // Open file on sd card
    if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
      print_Error(F("Can't create file on SD"), true);
    }

    for (byte i = 0; i < (eepPages / 64); i++) {
      // Disable interrupts for more uniform clock pulses
      noInterrupts();

      for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
        // Blink led
        blinkLED();

        // Send read command
        sendData(0x04);
        // Send Page number
        sendData(pageNumber + (i * 64));
        // Send stop bit
        sendStop();

        // read data
        readData();
        sendStop();

        // OR 8 bits into one byte for a total of 8 bytes
        for (byte j = 0; j < 64; j += 8) {
          sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
        }
        // Wait ~600us between pages
        for (int i = 0; i < 2000; i++) {
          __asm__("nop\n\t");
        }
      }
      interrupts();

      // Write 64 pages at once to the SD card
      myFile.write(sdBuffer, 512);
    }
    // Close the file:
    myFile.close();
    //clear the screen
    display_Clear();
    print_Msg(F("Saved to "));
    print_Msg(folder);
    println_Msg(F("/"));
    display_Update();
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Check if a write succeeded, returns 0 if all is ok and number of errors if not
unsigned long verifyEeprom() {
  if ((saveType == 5) || (saveType == 6)) {
    writeErrors = 0;

    display_Clear();
    print_Msg(F("Verifying against "));
    println_Msg(filePath);
    display_Update();

    // Open file on sd card
    if (myFile.open(filePath, O_READ)) {

      for (byte i = 0; i < (eepPages / 64); i++) {
        // Disable interrupts for more uniform clock pulses
        noInterrupts();

        for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
          // Blink led
          blinkLED();

          // Send read command
          sendData(0x04);
          // Send Page number
          sendData(pageNumber + (i * 64));
          // Send stop bit
          sendStop();

          // read data
          readData();
          sendStop();

          // OR 8 bits into one byte for a total of 8 bytes
          for (byte j = 0; j < 64; j += 8) {
            sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
          }
          // Wait ~600us between pages
          for (int i = 0; i < 2000; i++) {
            __asm__("nop\n\t");
          }
        }
        interrupts();

        // Check sdBuffer content against file on sd card
        for (int c = 0; c < 512; c++) {
          if (myFile.read() != sdBuffer[c]) {
            writeErrors++;
          }
        }
      }
      // Close the file:
      myFile.close();
    }
    else {
      // SD Error
      writeErrors = 999999;
      print_Error(F("SD Error"), true);
    }
    // Return 0 if verified ok, or number of errors
    return writeErrors;
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

/******************************************
  SRAM functions
*****************************************/
// Write sram to cartridge
void writeSram(unsigned long sramSize) {
  if (saveType == 1) {
    // Create filepath
    sprintf(filePath, "%s/%s", filePath, fileName);
    println_Msg(F("Writing..."));
    println_Msg(filePath);
    display_Update();

    // Open file on sd card
    if (myFile.open(filePath, O_READ)) {
      for (unsigned long currByte = sramBase; currByte < (sramBase + sramSize); currByte += 512) {

        // Read save from SD into buffer
        myFile.read(sdBuffer, 512);

        // Set the address for the next 512 bytes
        setAddress_N64(currByte);

        for (int c = 0; c < 512; c += 2) {
          // Join bytes to word
          word myWord = ( ( sdBuffer[c] & 0xFF ) << 8 ) | ( sdBuffer[c + 1] & 0xFF );

          // Write word
          writeWord_N64(myWord);
        }
      }
      // Close the file:
      myFile.close();
      println_Msg(F("Done"));
      display_Update();
    }
    else {
      print_Error(F("SD Error"), true);
    }

  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Read sram and save to the SD card
void readSram(unsigned long sramSize, byte flashramType) {
  int offset = 512;
  int bufferSize = 512;
  if (flashramType == 2) {
    offset = 64;
    bufferSize = 128;
  }

  // Get name, add extension and convert to char array for sd lib
  strcpy(fileName, romName);

  if (saveType == 4) {
    strcat(fileName, ".fla");
  }
  else if (saveType == 1) {
    strcat(fileName, ".sra");
  }
  else {
    print_Error(F("Savetype Error"), true);
  }

  // create a new folder for the save file
  EEPROM_readAnything(0, foldern);
  sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
  sd.mkdir(folder, true);
  sd.chdir(folder);

  // write new folder number back to eeprom
  foldern = foldern + 1;
  EEPROM_writeAnything(0, foldern);

  // Open file on sd card
  if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
    print_Error(F("SD Error"), true);
  }

  for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
    // Set the address
    setAddress_N64(currByte);

    for (int c = 0; c < bufferSize; c += 2) {
      // split word
      word myWord = readWord_N64();
      byte loByte = myWord & 0xFF;
      byte hiByte = myWord >> 8;

      // write to buffer
      sdBuffer[c] = hiByte;
      sdBuffer[c + 1] = loByte;
    }
    myFile.write(sdBuffer, bufferSize);
  }
  // Close the file:
  myFile.close();
  print_Msg(F("Saved to "));
  print_Msg(folder);
  println_Msg(F("/"));
  display_Update();
}

unsigned long verifySram(unsigned long sramSize, byte flashramType) {
  writeErrors = 0;

  int offset = 512;
  int bufferSize = 512;
  if (flashramType == 2) {
    offset = 64;
    bufferSize = 128;
  }

  // Open file on sd card
  if (myFile.open(filePath, O_READ)) {
    for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
      // Set the address
      setAddress_N64(currByte);

      for (int c = 0; c < bufferSize; c += 2) {
        // split word
        word myWord = readWord_N64();
        byte loByte = myWord & 0xFF;
        byte hiByte = myWord >> 8;

        // write to buffer
        sdBuffer[c] = hiByte;
        sdBuffer[c + 1] = loByte;
      }
      // Check sdBuffer content against file on sd card
      for (int i = 0; i < bufferSize; i++) {
        if (myFile.read() != sdBuffer[i]) {
          writeErrors++;
        }
      }
    }
    // Close the file:
    myFile.close();
  }
  else {
    print_Error(F("SD Error"), true);
  }
  // Return 0 if verified ok, or number of errors
  return writeErrors;
}

/******************************************
  Flashram functions
*****************************************/
// Send a command to the flashram command register
void sendFramCmd (unsigned long myCommand) {
  // Split command into two words
  word myComLowOut = myCommand & 0xFFFF;
  word myComHighOut = myCommand >> 16;

  // Set address to command register
  setAddress_N64(0x08010000);
  // Send command
  writeWord_N64(myComHighOut);
  writeWord_N64(myComLowOut);
}

// Init fram
void initFram() {
  // FRAM_EXECUTE_CMD
  sendFramCmd(0xD2000000);
  delay(10);
  // FRAM_EXECUTE_CMD
  sendFramCmd(0xD2000000);
  delay(10);
  //FRAM_STATUS_MODE_CMD
  sendFramCmd(0xE1000000);
  delay(10);
}

void writeFram(byte flashramType) {
  if (saveType == 4) {
    // Erase fram
    eraseFram();

    // Check if empty
    if (blankcheck_N64(flashramType) == 0) {
      println_Msg(F("OK"));
      display_Update();
    }
    else {
      println_Msg(F("FAIL"));
      display_Update();
    }

    // Create filepath
    sprintf(filePath, "%s/%s", filePath, fileName);
    print_Msg(F("Writing "));
    println_Msg(filePath);
    display_Update();

    // Open file on sd card
    if (myFile.open(filePath, O_READ)) {
      // Init fram
      initFram();

      // Write all 8 fram banks
      print_Msg(F("Bank "));
      for (byte bank = 0; bank < 8; bank++) {
        print_Msg(bank);
        print_Msg(F(" "));
        display_Update();

        // Write one bank of 128*128 bytes
        for (byte offset = 0; offset < 128; offset++) {
          // Read save from SD into buffer
          myFile.read(sdBuffer, 128);

          // FRAM_WRITE_MODE_CMD
          sendFramCmd(0xB4000000);
          delay(1);

          // Set the address for the next 128 bytes
          setAddress_N64(0x08000000);

          // Send 128 bytes, 64 words
          for (byte c = 0; c < 128; c += 2) {
            // Join two bytes into one word
            word myWord = ( ( sdBuffer[c] & 0xFF ) << 8 ) | ( sdBuffer[c + 1] & 0xFF );
            // Write word
            writeWord_N64(myWord);
          }
          // Delay between each "DMA"
          delay(1);

          //FRAM_WRITE_OFFSET_CMD + offset
          sendFramCmd((0xA5000000 | (((bank * 128) + offset) & 0xFFFF)));
          delay(1);

          // FRAM_EXECUTE_CMD
          sendFramCmd(0xD2000000);
          while (waitForFram(flashramType)) {
            delay(1);
          }
        }
        // Delay between banks
        delay(20);
      }
      println_Msg("");
      // Close the file:
      myFile.close();
    }
    else {
      print_Error(F("SD Error"), true);
    }
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Delete all 8 flashram banks
void eraseFram() {
  if (saveType == 4) {
    print_Msg(F("Erasing..."));
    display_Update();

    // Init fram
    initFram();

    // Erase fram
    // 0x4B00007F 0x4B0000FF 0x4B00017F 0x4B0001FF 0x4B00027F 0x4B0002FF 0x4B00037F 0x4B0003FF
    for (unsigned long bank = 0x4B00007F; bank < 0x4B00047F; bank += 0x80) {
      sendFramCmd(bank);
      delay(10);
      // FRAM_ERASE_MODE_CMD
      sendFramCmd(0x78000000);
      delay(10);
      // FRAM_EXECUTE_CMD
      sendFramCmd(0xD2000000);
      while (waitForFram(flashramType)) {
        delay(1);
      }
    }
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Read flashram
void readFram(byte flashramType) {
  if (saveType == 4) {
    // Put flashram into read mode
    // FRAM_READ_MODE_CMD
    sendFramCmd(0xF0000000);
    // Read Flashram
    readSram(131072, flashramType);
  }
  else {
    print_Error(F("Savetype Error"), true);
  }
}

// Verify flashram
unsigned long verifyFram(byte flashramType) {
  // Put flashram into read mode
  // FRAM_READ_MODE_CMD
  sendFramCmd(0xF0000000);
  writeErrors = verifySram(131072, flashramType);
  return writeErrors;
}

// Blankcheck flashram
unsigned long blankcheck_N64(byte flashramType) {
  writeErrors = 0;

  int offset = 512;
  int bufferSize = 512;
  if (flashramType == 2) {
    offset = 64;
    bufferSize = 128;
  }

  // Put flashram into read mode
  // FRAM_READ_MODE_CMD
  sendFramCmd(0xF0000000);

  // Read Flashram
  for (unsigned long currByte = sramBase; currByte < (sramBase + (131072 / flashramType)); currByte += offset) {
    // Set the address for the next 512 bytes
    setAddress_N64(currByte);

    for (int c = 0; c < bufferSize; c += 2) {
      // split word
      word myWord = readWord_N64();
      byte loByte = myWord & 0xFF;
      byte hiByte = myWord >> 8;

      // write to buffer
      sdBuffer[c] = hiByte;
      sdBuffer[c + 1] = loByte;
    }
    // Check sdBuffer content against file on sd card
    for (int i = 0; i < bufferSize; i++) {
      if (0xFF != sdBuffer[i]) {
        writeErrors++;
      }
    }
  }
  // Return 0 if verified ok, or number of errors
  return writeErrors;
}

// Wait until current operation is done
byte waitForFram(byte flashramType) {
  byte framStatus = 0;
  byte statusMXL1100[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1E};
  byte statusMXL1101[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1D};
  byte statusMN63F81[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0x32, 0x00, 0xF1};

  // FRAM_STATUS_MODE_CMD
  sendFramCmd(0xE1000000);
  delay(1);

  // Set address to Fram status register
  setAddress_N64(0x08000000);

  // Read Status
  for (byte c = 0; c < 8; c += 2) {
    // split word
    word myWord = readWord_N64();
    byte loByte = myWord & 0xFF;
    byte hiByte = myWord >> 8;

    // write to buffer
    sdBuffer[c] = hiByte;
    sdBuffer[c + 1] = loByte;
  }

  if (flashramType == 2) {
    for (byte c = 0; c < 8; c++) {
      if (statusMXL1100[c] != sdBuffer[c]) {
        framStatus = 1;
      }
    }
  }
  else if (flashramType == 1) {
    //MX29L1101
    if (MN63F81MPN == false) {
      for (byte c = 0; c < 8; c++) {
        if (statusMXL1101[c] != sdBuffer[c]) {
          framStatus = 1;
        }
      }
    }
    //MN63F81MPN
    else if (MN63F81MPN == true) {
      for (byte c = 0; c < 8; c++) {
        if (statusMN63F81[c] != sdBuffer[c]) {
          framStatus = 1;
        }
      }
    }
  }
  return framStatus;
}

// Get flashram type
void getFramType() {

  // FRAM_STATUS_MODE_CMD
  sendFramCmd(0xE1000000);
  delay(10);

  // Set address to Fram status register
  setAddress_N64(0x08000000);

  // Read Status
  for (byte c = 0; c < 8; c += 2) {
    // split word
    word myWord = readWord_N64();
    byte loByte = myWord & 0xFF;
    byte hiByte = myWord >> 8;

    // write to buffer
    sdBuffer[c] = hiByte;
    sdBuffer[c + 1] = loByte;
  }
  //MX29L1100
  if (sdBuffer[7] == 0x1e ) {
    flashramType = 2;
    println_Msg(F("Type: MX29L1100"));
    display_Update();
  }
  //MX29L1101
  else if (sdBuffer[7] == 0x1d )  {
    flashramType = 1;
    MN63F81MPN = false;
    println_Msg(F("Type: MX29L1101"));
    display_Update();
  }
  //MN63F81MPN
  else if (sdBuffer[7] == 0xf1 )  {
    flashramType = 1;
    MN63F81MPN = true;
    println_Msg(F("Type: MN63F81MPN"));
    display_Update();
  }
  // 29L1100KC-15B0 compat MX29L1101
  else if ((sdBuffer[7] == 0x8e ) || (sdBuffer[7] == 0x84 )) {
    flashramType = 1;
    MN63F81MPN = false;
    println_Msg(F("Type: 29L1100KC-15B0"));
    println_Msg(F("(compat. MX29L1101)"));
    display_Update();
  }
  // Type unknown
  else {
    for (byte c = 0; c < 8; c++) {
      print_Msg(sdBuffer[c], HEX);
      print_Msg(F(", "));
    }
    print_Error(F("Flashram unknown"), true);
  }
}

/******************************************
  Rom functions
*****************************************/
// Read rom and save to the SD card
void readRom_N64() {
  // Get name, add extension and convert to char array for sd lib
  strcpy(fileName, romName);
  strcat(fileName, ".Z64");

redumpnewfolder:
  // create a new folder
  EEPROM_readAnything(0, foldern);
  sprintf(folder, "N64/ROM/%s/%d", romName, foldern);
  sd.mkdir(folder, true);
  sd.chdir(folder);

  display_Clear();
  print_Msg(F("Saving to "));
  print_Msg(folder);
  println_Msg(F("/..."));
  display_Update();

  // write new folder number back to eeprom
  foldern = foldern + 1;
  EEPROM_writeAnything(0, foldern);

redumpsamefolder:
  // Open file on sd card
  if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
    print_Error(F("SD Error"), true);
  }

  // dumping rom slow
#ifndef fastcrc
  // get current time
  unsigned long startTime = millis();

  for (unsigned long currByte = romBase; currByte < (romBase + (cartSize * 1024 * 1024)); currByte += 512) {
    // Blink led
    if (currByte % 16384 == 0)
      blinkLED();

    // Set the address for the next 512 bytes
    setAddress_N64(currByte);

    for (int c = 0; c < 512; c += 2) {
      // split word
      word myWord = readWord_N64();
      byte loByte = myWord & 0xFF;
      byte hiByte = myWord >> 8;

      // write to buffer
      sdBuffer[c] = hiByte;
      sdBuffer[c + 1] = loByte;
    }
    myFile.write(sdBuffer, 512);
  }
  // Close the file:
  myFile.close();

  if (compareCRC("n64.txt", 0, 1, 0)) {
#else
  // dumping rom fast
  byte buffer[1024] = { 0 };

  // get current time
  unsigned long startTime = millis();

  //Initialize progress bar
  uint32_t processedProgressBar = 0;
  uint32_t totalProgressBar = (uint32_t)(cartSize) * 1024 * 1024;
  draw_progressbar(0, totalProgressBar);

  // prepare crc32
  uint32_t oldcrc32 = 0xFFFFFFFF;
  uint32_t tab_value = 0;
  uint8_t idx = 0;

  // run combined dumper + crc32 routine for better performance, as N64 ROMs are quite large for an 8bit micro
  // currently dumps + checksums a 32MB cart in 170 seconds (down from 347 seconds)
  for (unsigned long currByte = romBase; currByte < (romBase + (cartSize * 1024 * 1024)); currByte += 1024) {
    // Blink led
    if (currByte % 16384 == 0)
      blinkLED();

    // Set the address for the first 512 bytes to dump
    setAddress_N64(currByte);
    // Wait 62.5ns (safety)
    NOP;

    for (int c = 0; c < 512; c += 2) {
      // Pull read(PH6) low
      PORTH &= ~(1 << 6);
      // Wait ~310ns
      NOP; NOP; NOP; NOP; NOP;

      // data on PINK and PINF is valid now, read into sd card buffer
      buffer[c] =     PINK; // hiByte
      buffer[c + 1] = PINF; // loByte

      // Pull read(PH6) high
      PORTH |= (1 << 6);

      // crc32 update
      idx = ((oldcrc32) ^ (buffer[c]));
      tab_value = pgm_read_dword(crc_32_tab + idx);
      oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
      idx = ((oldcrc32) ^ (buffer[c + 1]));
      tab_value = pgm_read_dword(crc_32_tab + idx);
      oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
    }

    // Set the address for the next 512 bytes to dump
    setAddress_N64(currByte + 512);
    // Wait 62.5ns (safety)
    NOP;

    for (int c = 512; c < 1024; c += 2) {
      // Pull read(PH6) low
      PORTH &= ~(1 << 6);
      // Wait ~310ns
      NOP; NOP; NOP; NOP; NOP;

      // data on PINK and PINF is valid now, read into sd card buffer
      buffer[c] =     PINK; // hiByte
      buffer[c + 1] = PINF; // loByte

      // Pull read(PH6) high
      PORTH |= (1 << 6);

      // crc32 update
      idx = ((oldcrc32) ^ (buffer[c])) & 0xff;
      tab_value = pgm_read_dword(crc_32_tab + idx);
      oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
      idx = ((oldcrc32) ^ (buffer[c + 1])) & 0xff;
      tab_value = pgm_read_dword(crc_32_tab + idx);
      oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
    }

    processedProgressBar += 1024;
    draw_progressbar(processedProgressBar, totalProgressBar);
    // write out 1024 bytes to file
    myFile.write(buffer, 1024);
  }

  // Close the file:
  myFile.close();

  // convert checksum to string
  char crcStr[9];
  sprintf(crcStr, "%08lX", ~oldcrc32);

  // Search n64.txt for crc
  if (compareCRC("n64.txt", crcStr, 1, 0)) {
#endif
    unsigned long timeElapsed = (millis() - startTime) / 1000; // seconds
    print_Msg(F("Done ("));
    print_Msg(timeElapsed); // include elapsed time
    println_Msg(F("s)"));
    println_Msg(F(""));
    println_Msg(F("Press Button..."));
    display_Update();
    // This saves a tt file with rom info next to the dumped rom
#ifdef savesummarytotxt
    savesummary_N64(1, crcStr, timeElapsed);
#endif
#ifdef global_log
    save_log();
#endif
    wait();
  }
  else {
    // Dump was bad or unknown
    errorLvl = 1;
    setColor_RGB(255, 0, 0);
    println_Msg(F(""));
    println_Msg(F("Press Button..."));
    display_Update();
    // This saves a tt file with rom info next to the dumped rom
#ifdef savesummarytotxt
    savesummary_N64(0, crcStr, timeElapsed);
#endif
    wait();

    // N64 CRC32 error Menu
    unsigned char CRCMenu;
    // Copy menuOptions out of progmem
    convertPgm(menuOptionsN64CRC, 4);

    CRCMenu = question_box(F("Redump cartridge?"), menuOptions, 4, 0);

    // wait for user choice to come back from the question box menu
    switch (CRCMenu)
    {
      case 0:
        // Return to N64 menu
        display_Clear();
        break;

      case 1:
        // Dump again into new folder
        display_Clear();
        setColor_RGB(0, 0, 0);
        goto redumpnewfolder;
        break;

      case 2:
        // Dump again into same folder
        // Change to last directory
        sd.chdir(folder);
        // Delete old file
        if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
          print_Error(F("SD Error"), true);
        }
        if (!myFile.remove()) {
          print_Error(F("Delete Error"), true);
        }
        // Dump again
        display_Clear();
        println_Msg(F("Reading Rom..."));
        display_Update();
        setColor_RGB(0, 0, 0);
        goto redumpsamefolder;
        break;

      case 3:
        // Reset
        resetArduino();
        break;
    }
  }
}

#ifdef savesummarytotxt
// Save an info.txt with information on the dumped rom to the SD card
void savesummary_N64(boolean checkfound, char crcStr[9], unsigned long timeElapsed) {
  // Open file on sd card
  if (!myFile.open("N64/ROM/n64log.txt", O_RDWR | O_CREAT | O_APPEND)) {
    print_Error(F("SD Error"), true);
  }

  //Write the info
  myFile.print(F("Name\t: "));
  myFile.println(romName);

  myFile.print(F("ID\t: "));
  myFile.println(cartID);

  myFile.print(F("ROM CRC1: "));
  myFile.println(CRC1);

  myFile.print(F("ROM CRC2: "));
  myFile.println(CRC2);

  myFile.print(F("Size\t: "));
  myFile.print(cartSize);

  myFile.println(F(" MB"));
  myFile.print(F("Save\t: "));

  switch (saveType) {
    case 1:
      myFile.println(F("SRAM"));
      break;
    case 4:
      myFile.println(F("FLASH"));
      break;
    case 5:
      myFile.println(F("4K EEPROM"));
      break;
    case 6:
      myFile.println(F("16K EEPROM"));
      break;
    default:
      myFile.println(F("None/Unknown"));
      break;
  }

  myFile.print(F("Version\t: 1."));
  myFile.println(romVersion);

  myFile.print(F("Saved To: "));
  myFile.println(folder);

#ifdef RTC_installed
  myFile.print(F("Dumped\t: "));
  myFile.println(RTCStamp());
#endif

  myFile.print(F("CRC\t: "));
  myFile.print(crcStr);

  if (checkfound) {
    // Dump was a known good rom
    // myFile.println(F("Checksum matches"));
    myFile.println(" [Match]");
  }
  else {
    // myFile.println(F("Checksum not found"));
    myFile.println(" [No Match]");
  }

  myFile.print(F("Time\t: "));
  myFile.println(timeElapsed);

  myFile.println(F(" "));

  // Close the file:
  myFile.close();
}
#endif

/******************************************
   N64 Repro Flashrom Functions
 *****************************************/
void flashRepro_N64() {
  unsigned long sectorSize;
  byte bufferSize;
  // Check flashrom ID's
  idFlashrom_N64();

  // If the ID is known continue
  if (cartSize != 0) {
    // Print flashrom name
    if ((strcmp(flashid, "227E") == 0)  && (strcmp(cartID, "2201") == 0)) {
      print_Msg(F("Spansion S29GL256N"));
      if (cartSize == 64)
        println_Msg(F(" x2"));
      else
        println_Msg("");
    }
    else if ((strcmp(flashid, "227E") == 0)  && (strcmp(cartID, "2101") == 0)) {
      print_Msg(F("Spansion S29GL128N"));
    }
    else if ((strcmp(flashid, "227E") == 0)  && (strcmp(cartID, "2100") == 0)) {
      print_Msg(F("ST M29W128GL"));
    }
    else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
      print_Msg(F("Macronix MX29LV640"));
      if (cartSize == 16)
        println_Msg(F(" x2"));
      else
        println_Msg("");
    }
    else if (strcmp(flashid, "8816") == 0)
      println_Msg(F("Intel 4400L0ZDQ0"));
    else if (strcmp(flashid, "7E7E") == 0)
      println_Msg(F("Fujitsu MSP55LV100S"));
    else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2301") == 0))
      println_Msg(F("Fujitsu MSP55LV512"));
    else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "3901") == 0))
      println_Msg(F("Intel 512M29EW"));

    // Print info
    print_Msg(F("ID: "));
    print_Msg(flashid);
    print_Msg(F(" Size: "));
    print_Msg(cartSize);
    println_Msg(F("MB"));
    println_Msg("");
    println_Msg(F("This will erase your"));
    println_Msg(F("Repro Cartridge."));
    println_Msg(F("Attention: Use 3.3V!"));
    println_Msg("");
    println_Msg(F("Press Button..."));
    display_Update();
    wait();
  }
  else {
    println_Msg(F("Unknown flashrom"));
    print_Msg(F("ID: "));
    print_Msg(vendorID);
    print_Msg(F(" "));
    print_Msg(flashid);
    print_Msg(F(" "));
    println_Msg(cartID);
    println_Msg(F(" "));
    println_Msg(F("Press button for"));
    println_Msg(F("manual config"));
    println_Msg(F("This will erase your"));
    println_Msg(F("Repro Cartridge."));
    println_Msg(F("Attention: Use 3.3V!"));
    display_Update();
    wait();

    // clear IDs
    sprintf(vendorID, "%s", "CONF");
    sprintf(flashid, "%s", "CONF");
    sprintf(cartID, "%s", "CONF");



    // Set cartsize manually
    unsigned char N64RomMenu;
    // Copy menuOptions out of progmem
    convertPgm(romOptionsN64, 6);
    N64RomMenu = question_box(F("Select flash size"), menuOptions, 6, 0);

    // wait for user choice to come back from the question box menu
    switch (N64RomMenu)
    {
      case 0:
        // 4MB
        cartSize = 4;
        break;

      case 1:
        // 8MB
        cartSize = 8;
        break;

      case 2:
        // 12MB
        cartSize = 12;
        break;

      case 3:
        // 16MB
        cartSize = 16;
        break;

      case 4:
        // 32MB
        cartSize = 32;
        break;

      case 5:
        // 64MB
        cartSize = 64;
        break;
    }

    // Set flash buffer manually
    unsigned char N64BufferMenu;
    // Copy menuOptions out of progmem
    convertPgm(bufferOptionsN64, 4);
    N64BufferMenu = question_box(F("Select buffer size"), menuOptions, 4, 0);

    // wait for user choice to come back from the question box menu
    switch (N64BufferMenu)
    {
      case 0:
        // no buffer
        bufferSize = 0;
        break;

      case 1:
        // 32 byte buffer
        bufferSize = 32;
        break;

      case 2:
        // 64 byte buffer
        bufferSize = 64;
        break;

      case 3:
        // 128 byte buffer
        bufferSize = 128;
        break;
    }

    // Set sector size manually
    unsigned char N64SectorMenu;
    // Copy menuOptions out of progmem
    convertPgm(sectorOptionsN64, 4);
    N64SectorMenu = question_box(F("Select sector size"), menuOptions, 4, 0);

    // wait for user choice to come back from the question box menu
    switch (N64SectorMenu)
    {
      case 0:
        // 8KB sectors
        sectorSize = 0x2000;
        break;

      case 1:
        // 32KB sectors
        sectorSize = 0x8000;
        break;

      case 2:
        // 64KB sectors
        sectorSize = 0x10000;
        break;

      case 3:
        // 128KB sectors
        sectorSize = 0x20000;
        break;
    }
  }

  // Launch file browser
  filePath[0] = '\0';
  sd.chdir("/");
  fileBrowser(F("Select z64 file"));
  display_Clear();
  display_Update();

  // Create filepath
  sprintf(filePath, "%s/%s", filePath, fileName);

  // Open file on sd card
  if (myFile.open(filePath, O_READ)) {
    // Get rom size from file
    fileSize = myFile.fileSize();
    print_Msg(F("File size: "));
    print_Msg(fileSize / 1048576);
    println_Msg(F("MB"));
    display_Update();

    // Compare file size to flashrom size
    if ((fileSize / 1048576) > cartSize) {
      print_Error(F("File too big"), true);
    }

    // Erase needed sectors
    if (strcmp(flashid, "227E") == 0) {
      // Spansion S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
      eraseSector_N64(0x20000);
    }
    else if (strcmp(flashid, "7E7E") == 0) {
      // Fujitsu MSP55LV100S
      eraseMSP55LV100_N64();
    }
    else if ((strcmp(flashid, "8813") == 0) || (strcmp(flashid, "8816") == 0)) {
      // Intel 4400L0ZDQ0
      eraseIntel4400_N64();
      resetIntel4400_N64();
    }
    else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
      // Macronix MX29LV640, C9 is top boot and CB is bottom boot block
      eraseSector_N64(0x8000);
    }
    else {
      eraseFlashrom_N64();
    }

    // Check if erase was successful
    if (blankcheckFlashrom_N64()) {
      // Write flashrom
      println_Msg(F("OK"));
      print_Msg(F("Writing "));
      println_Msg(filePath);
      display_Update();

      if ((strcmp(cartID, "3901") == 0) && (strcmp(flashid, "227E") == 0)) {
        // Intel 512M29EW(64MB) with 0x20000 sector size and 128 byte buffer
        writeFlashBuffer_N64(0x20000, 128);
      }
      else if ((strcmp(cartID, "2100") == 0) && (strcmp(flashid, "227E") == 0)) {
        // ST M29W128GH(16MB) with 0x20000 sector size and 64 byte buffer
        writeFlashBuffer_N64(0x20000, 64);
      }
      else if (strcmp(flashid, "227E") == 0) {
        // Spansion S29GL128N/S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
        writeFlashBuffer_N64(0x20000, 32);
      }
      else if (strcmp(flashid, "7E7E") == 0) {
        //Fujitsu MSP55LV100S
        writeMSP55LV100_N64(0x20000);
      }
      else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
        // Macronix MX29LV640 without buffer and 0x8000 sector size
        writeFlashrom_N64(0x8000);
      }
      else if ((strcmp(flashid, "8813") == 0) || (strcmp(flashid, "8816") == 0)) {
        // Intel 4400L0ZDQ0
        writeIntel4400_N64();
        resetIntel4400_N64();
      }
      else if (bufferSize == 0) {
        writeFlashrom_N64(sectorSize);
      }
      else {
        writeFlashBuffer_N64(sectorSize, bufferSize);
      }

      // Close the file:
      myFile.close();

      // Verify
      print_Msg(F("Verifying..."));
      display_Update();
      writeErrors = verifyFlashrom_N64();
      if (writeErrors == 0) {
        println_Msg(F("OK"));
        display_Update();
      }
      else {
        print_Msg(writeErrors);
        print_Msg(F(" bytes "));
        print_Error(F("did not verify."), false);
      }
    }
    else {
      // Close the file
      myFile.close();
      print_Error(F("failed"), false);
    }
  }
  else {
    print_Error(F("Can't open file"), false);
  }

  println_Msg(F("Press Button..."));
  display_Update();
  wait();
  display_Clear();
  display_Update();
}

// Reset to read mode
void resetIntel4400_N64() {
  for (unsigned long currPartition = 0; currPartition < (cartSize * 0x100000); currPartition += 0x20000) {
    setAddress_N64(romBase + currPartition);
    writeWord_N64(0xFF);
  }
}

// Reset Fujitsu MSP55LV100S
void resetMSP55LV100_N64(unsigned long flashBase) {
  // Send reset Command
  setAddress_N64(flashBase);
  writeWord_N64(0xF0F0);
  delay(100);
}

// Common reset command
void resetFlashrom_N64(unsigned long flashBase) {
  // Send reset Command
  setAddress_N64(flashBase);
  writeWord_N64(0xF0);
  delay(100);
}

void idFlashrom_N64() {
  // Set size to 0 if no ID is found
  cartSize = 0;

  // Send flashrom ID command
  setAddress_N64(romBase + (0x555 << 1));
  writeWord_N64(0xAA);
  setAddress_N64(romBase + (0x2AA << 1));
  writeWord_N64(0x55);
  setAddress_N64(romBase + (0x555 << 1));
  writeWord_N64(0x90);

  // Read 1 byte vendor ID
  setAddress_N64(romBase);
  sprintf(vendorID, "%02X", readWord_N64());
  // Read 2 bytes flashrom ID
  sprintf(flashid, "%04X", readWord_N64());
  // Read 2 bytes secondary flashrom ID
  setAddress_N64(romBase + 0x1C);
  sprintf(cartID, "%04X", ((readWord_N64() << 8)  | (readWord_N64() & 0xFF)));

  // Spansion S29GL256N(32MB/64MB) with either one or two flashrom chips
  if ((strcmp(cartID, "2201") == 0) && (strcmp(flashid, "227E") == 0)) {
    cartSize = 32;

    // Reset flashrom
    resetFlashrom_N64(romBase);

    // Test for second flashrom chip at 0x2000000 (32MB)
    setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
    writeWord_N64(0xAA);
    setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
    writeWord_N64(0x55);
    setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
    writeWord_N64(0x90);

    char tempID[5];
    setAddress_N64(romBase + 0x2000000);
    // Read manufacturer ID
    readWord_N64();
    // Read flashrom ID
    sprintf(tempID, "%04X", readWord_N64());

    // Check if second flashrom chip is present
    if (strcmp(tempID, "227E") == 0)  {
      cartSize = 64;
    }
    resetFlashrom_N64(romBase + 0x2000000);
  }

  // Macronix MX29LV640(8MB/16MB) with either one or two flashrom chips
  else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
    cartSize = 8;

    resetFlashrom_N64(romBase + 0x800000);

    // Test for second flashrom chip at 0x800000 (8MB)
    setAddress_N64(romBase + 0x800000 + (0x555 << 1));
    writeWord_N64(0xAA);
    setAddress_N64(romBase + 0x800000 + (0x2AA << 1));
    writeWord_N64(0x55);
    setAddress_N64(romBase + 0x800000 + (0x555 << 1));
    writeWord_N64(0x90);

    char tempID[5];
    setAddress_N64(romBase + 0x800000);
    // Read manufacturer ID
    readWord_N64();
    // Read flashrom ID
    sprintf(tempID, "%04X", readWord_N64());

    // Check if second flashrom chip is present
    if ((strcmp(tempID, "22C9") == 0) || (strcmp(tempID, "22CB") == 0)) {
      cartSize = 16;
    }
    resetFlashrom_N64(romBase + 0x800000);
  }

  // Intel 4400L0ZDQ0 (64MB)
  else if (strcmp(flashid, "8816") == 0) {
    // Found first flashrom chip, set to 32MB
    cartSize = 32;
    resetIntel4400_N64();

    // Test if second half of the flashrom might be hidden
    setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
    writeWord_N64(0xAA);
    setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
    writeWord_N64(0x55);
    setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
    writeWord_N64(0x90);

    // Read manufacturer ID
    setAddress_N64(romBase + 0x2000000);
    readWord_N64();
    // Read flashrom ID
    sprintf(cartID, "%04X", readWord_N64());
    if (strcmp(cartID, "8813") == 0) {
      cartSize = 64;
      strncpy(flashid , cartID, 5);
    }
    resetIntel4400_N64();
    // Empty cartID string
    cartID[0] = '\0';
  }

  //Fujitsu MSP55LV512/Spansion S29GL512N (64MB)
  else if ((strcmp(cartID, "2301") == 0) && (strcmp(flashid, "227E") == 0)) {
    cartSize = 64;
    // Reset flashrom
    resetFlashrom_N64(romBase);
  }

  // Spansion S29GL128N(16MB) with one flashrom chip
  else if ((strcmp(cartID, "2101") == 0) && (strcmp(flashid, "227E") == 0)) {
    cartSize = 16;
    // Reset flashrom
    resetFlashrom_N64(romBase);
  }

  // ST M29W128GL(16MB) with one flashrom chip
  else if ((strcmp(cartID, "2100") == 0) && (strcmp(flashid, "227E") == 0)) {
    cartSize = 16;
    // Reset flashrom
    resetFlashrom_N64(romBase);
  }

  // Intel 512M29EW(64MB) with one flashrom chip
  else if ((strcmp(cartID, "3901") == 0) && (strcmp(flashid, "227E") == 0)) {
    cartSize = 64;
    // Reset flashrom
    resetFlashrom_N64(romBase);
  }

  // Unknown 227E type
  else if (strcmp(flashid, "227E") == 0) {
    cartSize = 0;
    // Reset flashrom
    resetFlashrom_N64(romBase);
  }

  //Test for Fujitsu MSP55LV100S (64MB)
  else  {
    // Send flashrom ID command
    setAddress_N64(romBase + (0x555 << 1));
    writeWord_N64(0xAAAA);
    setAddress_N64(romBase + (0x2AA << 1));
    writeWord_N64(0x5555);
    setAddress_N64(romBase + (0x555 << 1));
    writeWord_N64(0x9090);

    setAddress_N64(romBase);
    // Read 1 byte vendor ID
    readWord_N64();
    // Read 2 bytes flashrom ID
    sprintf(cartID, "%04X", readWord_N64());

    if (strcmp(cartID, "7E7E") == 0) {
      resetMSP55LV100_N64(romBase);
      cartSize = 64;
      strncpy(flashid , cartID, 5);
    }
  }
  if ((strcmp(flashid, "1240") == 0) && (strcmp(cartID, "1240") == 0)) {
    print_Error(F("Please reseat cartridge"), true);
  }
}

// Erase Intel flashrom
void eraseIntel4400_N64() {
  unsigned long flashBase = romBase;

  print_Msg(F("Erasing..."));
  display_Update();

  // If the game is smaller than 32Mbit only erase the needed blocks
  unsigned long lastBlock = 0x1FFFFFF;
  if (fileSize < 0x1FFFFFF)
    lastBlock = fileSize;

  // Erase 4 blocks with 16kwords each
  for (unsigned long currBlock = 0x0; currBlock < 0x1FFFF; currBlock += 0x8000) {
    // Unlock block command
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0x60);
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0xD0);
    // Erase command
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0x20);
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0xD0);

    // Read the status register
    setAddress_N64(flashBase + currBlock);
    word statusReg = readWord_N64();
    while ((statusReg | 0xFF7F) != 0xFFFF) {
      setAddress_N64(flashBase + currBlock);
      statusReg = readWord_N64();
    }
  }

  // Erase up to 255 blocks with 64kwords each
  for (unsigned long currBlock = 0x20000; currBlock < lastBlock; currBlock += 0x1FFFF) {
    // Unlock block command
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0x60);
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0xD0);
    // Erase command
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0x20);
    setAddress_N64(flashBase + currBlock);
    writeWord_N64(0xD0);

    // Read the status register
    setAddress_N64(flashBase + currBlock);
    word statusReg = readWord_N64();
    while ((statusReg | 0xFF7F) != 0xFFFF) {
      setAddress_N64(flashBase + currBlock);
      statusReg = readWord_N64();
    }

    // Blink led
    blinkLED();
  }

  // Check if we should erase the second chip too
  if ((cartSize = 64) && (fileSize > 0x2000000)) {
    // Switch base address to second chip
    flashBase = romBase + 0x2000000;

    // 255 blocks with 64kwords each
    for (unsigned long currBlock = 0x0; currBlock < 0x1FDFFFF; currBlock += 0x1FFFF) {
      // Unlock block command
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0x60);
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0xD0);
      // Erase command
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0x20);
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0xD0);

      // Read the status register
      setAddress_N64(flashBase + currBlock);
      word statusReg = readWord_N64();
      while ((statusReg | 0xFF7F) != 0xFFFF) {
        setAddress_N64(flashBase + currBlock);
        statusReg = readWord_N64();
      }

      // Blink led
      blinkLED();
    }

    // 4 blocks with 16kword each
    for (unsigned long currBlock = 0x1FE0000; currBlock < 0x1FFFFFF; currBlock += 0x8000) {
      // Unlock block command
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0x60);
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0xD0);
      // Erase command
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0x20);
      setAddress_N64(flashBase + currBlock);
      writeWord_N64(0xD0);

      // Read the status register
      setAddress_N64(flashBase + currBlock);
      word statusReg = readWord_N64();
      while ((statusReg | 0xFF7F) != 0xFFFF) {
        setAddress_N64(flashBase + currBlock);
        statusReg = readWord_N64();
      }
    }
  }
}

// Erase Fujutsu MSP55LV100S
void eraseMSP55LV100_N64() {
  unsigned long flashBase = romBase;
  unsigned long sectorSize = 0x20000;

  print_Msg(F("Erasing..."));
  display_Update();

  for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
    // Blink led
    blinkLED();

    // Send Erase Command to first chip
    setAddress_N64(flashBase + (0x555 << 1));
    writeWord_N64(0xAAAA);
    setAddress_N64(flashBase + (0x2AA << 1));
    writeWord_N64(0x5555);
    setAddress_N64(flashBase + (0x555 << 1));
    writeWord_N64(0x8080);
    setAddress_N64(flashBase + (0x555 << 1));
    writeWord_N64(0xAAAA);
    setAddress_N64(flashBase + (0x2AA << 1));
    writeWord_N64(0x5555);
    setAddress_N64(romBase + currSector);
    writeWord_N64(0x3030);

    // Read the status register
    setAddress_N64(romBase + currSector);
    word statusReg = readWord_N64();
    while ((statusReg | 0xFF7F) != 0xFFFF) {
      setAddress_N64(romBase + currSector);
      statusReg = readWord_N64();
    }

    // Read the status register
    setAddress_N64(romBase + currSector);
    statusReg = readWord_N64();
    while ((statusReg | 0x7FFF) != 0xFFFF) {
      setAddress_N64(romBase + currSector);
      statusReg = readWord_N64();
    }
  }
}

// Common chip erase command
void eraseFlashrom_N64() {
  print_Msg(F("Chip erase..."));
  display_Update();

  // Send Erase Command
  setAddress_N64(romBase + (0x555 << 1));
  writeWord_N64(0xAA);
  setAddress_N64(romBase + (0x2AA << 1));
  writeWord_N64(0x55);
  setAddress_N64(romBase + (0x555 << 1));
  writeWord_N64(0x80);
  setAddress_N64(romBase + (0x555 << 1));
  writeWord_N64(0xAA);
  setAddress_N64(romBase + (0x2AA << 1));
  writeWord_N64(0x55);
  setAddress_N64(romBase + (0x555 << 1));
  writeWord_N64(0x10);

  // Read the status register
  setAddress_N64(romBase);
  word statusReg = readWord_N64();
  while ((statusReg | 0xFF7F) != 0xFFFF) {
    setAddress_N64(romBase);
    statusReg = readWord_N64();
    // Blink led
    blinkLED();
    delay(500);
  }
}

// Common sector erase command
void eraseSector_N64(unsigned long sectorSize) {
  unsigned long flashBase = romBase;

  print_Msg(F("Sector erase..."));
  display_Update();

  for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
    // Blink led
    blinkLED();

    // Spansion S29GL256N(32MB/64MB) with two flashrom chips
    if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0) && (strcmp(flashid, "227E") == 0)) {
      // Change to second chip
      flashBase = romBase + 0x2000000;
    }
    // Macronix MX29LV640(8MB/16MB) with two flashrom chips
    else if ((currSector == 0x800000) && ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0))) {
      flashBase = romBase + 0x800000;
    }

    // Send Erase Command
    setAddress_N64(flashBase + (0x555 << 1));
    writeWord_N64(0xAA);
    setAddress_N64(flashBase + (0x2AA << 1));
    writeWord_N64(0x55);
    setAddress_N64(flashBase + (0x555 << 1));
    writeWord_N64(0x80);
    setAddress_N64(flashBase + (0x555 << 1));
    writeWord_N64(0xAA);
    setAddress_N64(flashBase + (0x2AA << 1));
    writeWord_N64(0x55);
    setAddress_N64(romBase + currSector);
    writeWord_N64(0x30);

    // Read the status register
    setAddress_N64(romBase + currSector);
    word statusReg = readWord_N64();
    while ((statusReg | 0xFF7F) != 0xFFFF) {
      setAddress_N64(romBase + currSector);
      statusReg = readWord_N64();
    }
  }
}

boolean blankcheckFlashrom_N64() {
  for (unsigned long currByte = romBase; currByte < romBase + fileSize; currByte += 512) {
    // Blink led
    if (currByte % 131072 == 0)
      blinkLED();

    // Set the address
    setAddress_N64(currByte);

    for (int c = 0; c < 512; c += 2) {
      if (readWord_N64() != 0xFFFF) {
        return 0;
      }
    }
  }
  return 1;
}

// Write Intel flashrom
void writeIntel4400_N64() {
  for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
    // Blink led
    blinkLED();

    // Write to flashrom
    for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
      // Fill SD buffer
      myFile.read(sdBuffer, 512);

      // Write 32 words at a time
      for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 64) {
        // Buffered program command
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
        writeWord_N64(0xE8);

        // Check Status register
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
        word statusReg = readWord_N64();
        while ((statusReg | 0xFF7F) != 0xFFFF) {
          setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
          statusReg = readWord_N64();
        }

        // Write word count (minus 1)
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
        writeWord_N64(0x1F);

        // Write buffer
        for (byte currByte = 0; currByte < 64; currByte += 2) {
          // Join two bytes into one word
          word currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );
          setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
          writeWord_N64(currWord);
        }

        // Write Buffer to Flash
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
        writeWord_N64(0xD0);

        // Read the status register at last written address
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
        statusReg = readWord_N64();
        while ((statusReg | 0xFF7F) != 0xFFFF) {
          setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
          statusReg = readWord_N64();
        }
      }
    }
  }
}
// Write Fujitsu MSP55LV100S flashrom consisting out of two MSP55LV512 flashroms one used for the high byte the other for the low byte
void writeMSP55LV100_N64(unsigned long sectorSize) {
  unsigned long flashBase = romBase;

  for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
    // Blink led
    blinkLED();

    // Write to flashrom
    for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
      // Fill SD buffer
      myFile.read(sdBuffer, 512);

      // Write 32 bytes at a time
      for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 32) {

        // 2 unlock commands
        setAddress_N64(flashBase + (0x555 << 1));
        writeWord_N64(0xAAAA);
        setAddress_N64(flashBase + (0x2AA << 1));
        writeWord_N64(0x5555);

        // Write buffer load command at sector address
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
        writeWord_N64(0x2525);
        // Write word count (minus 1) at sector address
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
        writeWord_N64(0x0F0F);

        // Define variable before loop so we can use it later when reading the status register
        word currWord;

        for (byte currByte = 0; currByte < 32; currByte += 2) {
          // Join two bytes into one word
          currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );

          // Load Buffer Words
          setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
          writeWord_N64(currWord);
        }

        // Write Buffer to Flash
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
        writeWord_N64(0x2929);

        // Read the status register at last written address
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
        word statusReg = readWord_N64();
        while ((statusReg | 0x7F7F) != (currWord | 0x7F7F)) {
          setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
          statusReg = readWord_N64();
        }
      }
    }
  }
}

// Write Spansion S29GL256N flashrom using the 32 byte write buffer
void writeFlashBuffer_N64(unsigned long sectorSize, byte bufferSize) {
  unsigned long flashBase = romBase;

  for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
    // Blink led
    blinkLED();

    // Spansion S29GL256N(32MB/64MB) with two flashrom chips
    if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0)) {
      flashBase = romBase + 0x2000000;
    }

    // Write to flashrom
    for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
      // Fill SD buffer
      myFile.read(sdBuffer, 512);

      // Write 32 bytes at a time
      for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += bufferSize) {

        // 2 unlock commands
        setAddress_N64(flashBase + (0x555 << 1));
        writeWord_N64(0xAA);
        setAddress_N64(flashBase + (0x2AA << 1));
        writeWord_N64(0x55);

        // Write buffer load command at sector address
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
        writeWord_N64(0x25);
        // Write word count (minus 1) at sector address
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
        writeWord_N64((bufferSize / 2) - 1);

        // Define variable before loop so we can use it later when reading the status register
        word currWord;

        for (byte currByte = 0; currByte < bufferSize; currByte += 2) {
          // Join two bytes into one word
          currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );

          // Load Buffer Words
          setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
          writeWord_N64(currWord);
        }

        // Write Buffer to Flash
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
        writeWord_N64(0x29);

        // Read the status register at last written address
        setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
        word statusReg = readWord_N64();
        while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
          setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
          statusReg = readWord_N64();
        }
      }
    }
  }
}

// Write MX29LV640 flashrom without write buffer
void writeFlashrom_N64(unsigned long sectorSize) {
  unsigned long flashBase = romBase;

  for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
    // Blink led
    blinkLED();

    // Macronix MX29LV640(8MB/16MB) with two flashrom chips
    if (currSector == 0x800000) {
      flashBase = romBase + 0x800000;
    }

    // Write to flashrom
    for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
      // Fill SD buffer
      myFile.read(sdBuffer, 512);
      for (int currByte = 0; currByte < 512; currByte += 2) {
        // Join two bytes into one word
        word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
        // 2 unlock commands
        setAddress_N64(flashBase + (0x555 << 1));
        writeWord_N64(0xAA);
        setAddress_N64(flashBase + (0x2AA << 1));
        writeWord_N64(0x55);
        // Program command
        setAddress_N64(flashBase + (0x555 << 1));
        writeWord_N64(0xA0);
        // Write word
        setAddress_N64(romBase + currSector + currSdBuffer + currByte);
        writeWord_N64(currWord);

        // Read the status register
        setAddress_N64(romBase + currSector + currSdBuffer + currByte);
        word statusReg = readWord_N64();
        while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
          setAddress_N64(romBase + currSector + currSdBuffer + currByte);
          statusReg = readWord_N64();
        }
      }
    }
  }
}

unsigned long verifyFlashrom_N64() {
  // Open file on sd card
  if (myFile.open(filePath, O_READ)) {
    writeErrors = 0;

    for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
      // Blink led
      blinkLED();
      for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
        // Fill SD buffer
        myFile.read(sdBuffer, 512);
        for (int currByte = 0; currByte < 512; currByte += 2) {
          // Join two bytes into one word
          word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
          // Read flash
          setAddress_N64(romBase + currSector + currSdBuffer + currByte);
          // Compare both
          if (readWord_N64() != currWord) {
            writeErrors++;
            // Abord if too many errors
            if (writeErrors > 20) {
              print_Msg(F("More than "));
              // Close the file:
              myFile.close();
              return writeErrors;
            }
          }
        }
      }
    }
    // Close the file:
    myFile.close();
    return writeErrors;
  }
  else {
    println_Msg(F("Can't open file"));
    display_Update();
    return 9999;
  }
}

/******************************************
   N64 Gameshark Flash Functions
 *****************************************/
void flashGameshark_N64() {
  // Check flashrom ID's
  idGameshark_N64();

  // Check for SST 29LE010 (0808)/SST 28LF040 (0404)/AMTEL AT29LV010A (3535)/SST 29EE010 (0707)
  // !!!!          This has been confirmed to allow reading of v1.07, v1.09, v2.0-2.21, v3.2-3.3           !!!!
  // !!!!   29LE010/29EE010/AT29LV010A are very similar and can possibly be written to with this process.  !!!!
  // !!!!                                                                                                  !!!!
  // !!!!                                PROCEED AT YOUR OWN RISK                                          !!!!
  // !!!!                                                                                                  !!!!
  // !!!! SST 29EE010 may have a 5V requirement for writing however dumping works at 3V. As such it is not !!!!
  // !!!!        advised to write to a cart with this chip until further testing can be completed.         !!!!

  if (strcmp(flashid, "0808") == 0 || strcmp(flashid, "0404") == 0 || strcmp(flashid, "3535") == 0 || strcmp(flashid, "0707") == 0) {
    backupGameshark_N64();
    println_Msg("");
    println_Msg(F("This will erase your"));
    println_Msg(F("Gameshark cartridge"));
    println_Msg(F("Attention: Use 3.3V!"));
    println_Msg(F("Power OFF if Unsure!"));
    println_Msg(F("Press Button..."));
    display_Update();
    wait();

    // Launch file browser
    filePath[0] = '\0';
    sd.chdir("/");
    fileBrowser(F("Select z64 file"));
    display_Clear();
    display_Update();

    // Create filepath
    sprintf(filePath, "%s/%s", filePath, fileName);

    // Open file on sd card
    if (myFile.open(filePath, O_READ)) {
      // Get rom size from file
      fileSize = myFile.fileSize();
      print_Msg(F("File size: "));
      print_Msg(fileSize / 1024);
      println_Msg(F("KB"));
      display_Update();

      // Compare file size to flashrom size
      if (fileSize > 262144) {
        print_Error(F("File too big"), true);
      }

      // SST 29LE010, chip erase not needed as this eeprom automaticly erases during the write cycle
      eraseGameshark_N64();

      // Write flashrom
      print_Msg(F("Writing "));
      println_Msg(filePath);
      display_Update();
      writeGameshark_N64();

      // Close the file:
      myFile.close();

      // Verify
      print_Msg(F("Verifying..."));
      display_Update();
      writeErrors = verifyGameshark_N64();

      if (writeErrors == 0) {
        println_Msg(F("OK"));
        println_Msg(F(""));
        println_Msg(F("Turn Cart Reader off now"));
        display_Update();
        while (1);
      }
      else {
        print_Msg(writeErrors);
        print_Msg(F(" bytes "));
        print_Error(F("did not verify."), false);
      }
    }
    else {
      print_Error(F("Can't open file"), false);
    }
  }
  // If the ID is unknown show error message
  else {
    print_Msg(F("ID: "));
    println_Msg(flashid);
    print_Error(F("Unknown flashrom"), false);
  }

  println_Msg(F("Press Button..."));
  display_Update();
  wait();
  display_Clear();
  display_Update();
}


//Test for SST 29LE010  or SST 28LF040 (0404) or AMTEL AT29LV010A (3535) or SST 29EE010 (0707)
void idGameshark_N64() {
  //Send flashrom ID command
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0xAAAA);
  setAddress_N64(romBase + 0x5554);
  writeWord_N64(0x5555);
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0x9090);

  setAddress_N64(romBase);
  // Read 1 byte vendor ID
  readWord_N64();
  // Read 2 bytes flashrom ID
  sprintf(flashid, "%04X", readWord_N64());
  // Reset flashrom
  resetGameshark_N64();
}

//Reset ST29LE010
void resetGameshark_N64() {
  // Send reset Command
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0xAAAA);
  setAddress_N64(romBase + 0x5554);
  writeWord_N64(0x5555);
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0xF0F0);
  delay(100);
}

// Read rom and save to the SD card
void backupGameshark_N64() {
  // create a new folder
  EEPROM_readAnything(0, foldern);
  sprintf(fileName, "GS%d", foldern);
  strcat(fileName, ".z64");
  sd.mkdir("N64/ROM/Gameshark", true);
  sd.chdir("N64/ROM/Gameshark");

  display_Clear();
  print_Msg(F("Saving "));
  print_Msg(fileName);
  println_Msg(F("..."));
  display_Update();

  // write new folder number back to eeprom
  foldern = foldern + 1;
  EEPROM_writeAnything(0, foldern);

  // Open file on sd card
  if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
    print_Error(F("SD Error"), true);
  }

  for (unsigned long currByte = romBase + 0xC00000; currByte < (romBase + 0xC00000 + 262144); currByte += 512) {
    // Blink led
    if (currByte % 16384 == 0)
      blinkLED();

    // Set the address for the next 512 bytes
    setAddress_N64(currByte);

    for (int c = 0; c < 512; c += 2) {
      // split word
      word myWord = readWord_N64();
      byte loByte = myWord & 0xFF;
      byte hiByte = myWord >> 8;

      // write to buffer
      sdBuffer[c] = hiByte;
      sdBuffer[c + 1] = loByte;
    }
    myFile.write(sdBuffer, 512);
  }
  // Close the file:
  myFile.close();
}

// Send chip erase to the two SST29LE010 inside the Gameshark
void eraseGameshark_N64() {
  println_Msg(F("Erasing..."));
  display_Update();

  //Sending erase command according to datasheet
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0xAAAA);
  setAddress_N64(romBase + 0x5554);
  writeWord_N64(0x5555);
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0x8080);
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0xAAAA);
  setAddress_N64(romBase + 0x5554);
  writeWord_N64(0x5555);
  setAddress_N64(romBase + 0xAAAA);
  writeWord_N64(0x1010);

  delay(20);
}

// Write Gameshark with 2x SST29LE010 Eeproms
void writeGameshark_N64() {
  // Each 29LE010 has 1024 pages, each 128 bytes in size
  for (unsigned long currPage = 0; currPage < fileSize / 2; currPage += 128) {
    // Fill SD buffer with twice the amount since we flash 2 chips
    myFile.read(sdBuffer, 256);
    // Blink led
    blinkLED();

    //Send page write command to both flashroms
    setAddress_N64(romBase + 0xAAAA);
    writeWord_N64(0xAAAA);
    setAddress_N64(romBase + 0x5554);
    writeWord_N64(0x5555);
    setAddress_N64(romBase + 0xAAAA);
    writeWord_N64(0xA0A0);

    // Write 1 page each, one flashrom gets the low byte, the other the high byte.
    for (unsigned long currByte = 0; currByte < 256; currByte += 2) {
      // Set address
      setAddress_N64(romBase + 0xC00000 + (currPage * 2) + currByte);
      // Join two bytes into one word
      word currWord = ((sdBuffer[currByte] & 0xFF) << 8) | (sdBuffer[currByte + 1] & 0xFF);
      // Send byte data
      writeWord_N64(currWord);
    }
    delay(30);
  }
}

unsigned long verifyGameshark_N64() {
  // Open file on sd card
  if (myFile.open(filePath, O_READ)) {
    writeErrors = 0;

    for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
      // Blink led
      blinkLED();
      for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
        // Fill SD buffer
        myFile.read(sdBuffer, 512);
        for (int currByte = 0; currByte < 512; currByte += 2) {
          // Join two bytes into one word
          word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
          // Read flash
          setAddress_N64(romBase + 0xC00000 + currSector + currSdBuffer + currByte);
          // Compare both
          if (readWord_N64() != currWord) {
            if ( (strcmp(flashid, "0808") == 0) && (currSector + currSdBuffer + currByte > 0x3F) && (currSector + currSdBuffer + currByte < 0x1080)) {
              // Gameshark maps this area to the bootcode of the plugged in cartridge
            }
            else {
              writeErrors++;
            }
          }
        }
      }
    }
    // Close the file:
    myFile.close();
    return writeErrors;
  }
  else {
    println_Msg(F("Can't open file"));
    display_Update();
    return 9999;
  }
}

#endif

//******************************************
// End of File
//******************************************