2
0
mirror of https://github.com/sanni/cartreader.git synced 2024-12-19 01:21:48 +01:00
cartreader/Cart_Reader/NES.ino

3619 lines
108 KiB
Arduino
Raw Normal View History

//******************************************
// NES MODULE
//******************************************
// mostly copy&pasted from "Famicom Dumper" 2019-08-31 by skaman
// also based on "CoolArduino" by HardWareMan
// Pinout changes: LED and CIRAM_A10
#include "options.h"
#ifdef enable_NES
#include "atoi32.h"
//Line Content
//28 Supported Mappers
//103 Defines
//133 Variables
//194 Menu
//313 Setup
//342 Low Level Functions
//589 CRC Functions
//649 File Functions
//844 NES 2.0 Header Functions
//1125 Config Functions
//1721 ROM Functions
//2819 RAM Functions
//3248 Eeprom Functions
//3444 NESmaker Flash Cart Functions
/******************************************
Supported Mappers
*****************************************/
// Supported Mapper Array (iNES Mapper #s)
// Format = {mapper,prglo,prghi,chrlo,chrhi,ramlo,ramhi}
static const byte PROGMEM mapsize [] = {
0, 0, 1, 0, 1, 0, 2, // nrom [sram r/w]
1, 1, 5, 0, 5, 0, 3, // mmc1 [sram r/w]
2, 3, 4, 0, 0, 0, 0, // uxrom
3, 0, 1, 0, 3, 0, 0, // cnrom
4, 1, 5, 0, 6, 0, 1, // mmc3/mmc6 [sram/prgram r/w]
5, 3, 5, 5, 7, 0, 3, // mmc5 [sram r/w]
7, 3, 4, 0, 0, 0, 0, // axrom
9, 3, 3, 5, 5, 0, 0, // mmc2 (punch out)
10, 3, 4, 4, 5, 1, 1, // mmc4 [sram r/w]
13, 1, 1, 0, 0, 0, 0, // cprom (videomation)
16, 3, 4, 5, 6, 0, 1, // bandai x24c02 [eep r/w]
18, 3, 4, 5, 6, 0, 1, // jaleco ss8806 [sram r/w]
19, 3, 4, 5, 6, 0, 1, // namco 106/163 [sram/prgram r/w]
21, 4, 4, 5, 6, 0, 1, // vrc4a/vrc4c [sram r/w]
22, 3, 3, 5, 5, 0, 0, // vrc2a
23, 3, 3, 5, 6, 0, 0, // vrc2b/vrc4e
24, 4, 4, 5, 5, 0, 0, // vrc6a (akumajou densetsu)
25, 3, 4, 5, 6, 0, 1, // vrc2c/vrc4b/vrc4d [sram r/w]
26, 4, 4, 5, 6, 1, 1, // vrc6b [sram r/w]
30, 4, 5, 0, 0, 0, 0, // unrom 512 (NESmaker) [UNLICENSED]
32, 3, 4, 5, 5, 0, 0, // irem g-101
33, 3, 4, 5, 6, 0, 0, // taito tc0190
34, 3, 3, 0, 0, 0, 0, // bnrom [nina-1 NOT SUPPORTED]
37, 4, 4, 6, 6, 0, 0, // (super mario bros + tetris + world cup)
47, 4, 4, 6, 6, 0, 0, // (super spike vball + world cup)
48, 3, 4, 6, 6, 0, 0, // taito tc0690
65, 3, 4, 5, 6, 0, 0, // irem h-3001
66, 2, 3, 2, 3, 0, 0, // gxrom/mhrom
67, 3, 3, 5, 5, 0, 0, // sunsoft 3
68, 3, 3, 5, 6, 0, 1, // sunsoft 4 [sram r/w]
69, 3, 4, 5, 6, 0, 1, // sunsoft fme-7/5a/5b [sram r/w]
70, 3, 3, 5, 5, 0, 0, // bandai
71, 2, 4, 0, 0, 0, 0, // camerica/codemasters [UNLICENSED]
72, 3, 3, 5, 5, 0, 0, // jaleco jf-17
73, 3, 3, 0, 0, 0, 0, // vrc3 (salamander)
75, 3, 3, 5, 5, 0, 0, // vrc1
76, 3, 3, 5, 5, 0, 0, // namco 109 variant (megami tensei: digital devil story)
77, 3, 3, 3, 3, 0, 0, // (napoleon senki)
78, 3, 3, 5, 5, 0, 0, // irem 74hc161/32
80, 3, 3, 5, 6, 0, 1, // taito x1-005 [prgram r/w]
82, 3, 3, 5, 6, 0, 1, // taito x1-017 [prgram r/w]
85, 3, 5, 0, 5, 0, 1, // vrc7 [sram r/w]
86, 3, 3, 4, 4, 0, 0, // jaleco jf-13 (moero pro yakyuu)
87, 0, 1, 2, 3, 0, 0,
88, 3, 3, 5, 5, 0, 0, // namco (dxrom variant)
89, 3, 3, 5, 5, 0, 0, // sunsoft 2 variant (tenka no goikenban: mito koumon)
92, 4, 4, 5, 5, 0, 0, // jaleco jf-19/jf-21
93, 3, 3, 0, 0, 0, 0, // sunsoft 2
94, 3, 3, 0, 0, 0, 0, // hvc-un1rom (senjou no ookami)
95, 3, 3, 3, 3, 0, 0, // namcot-3425 (dragon buster)
96, 3, 3, 0, 0, 0, 0, // (oeka kids)
97, 4, 4, 0, 0, 0, 0, // irem tam-s1 (kaiketsu yanchamaru)
105, 4, 4, 0, 0, 0, 0, // (nintendo world Championships 1990) [UNTESTED]
118, 3, 4, 5, 5, 0, 1, // txsrom/mmc3 [sram r/w]
119, 3, 3, 4, 4, 0, 0, // tqrom/mmc3
140, 3, 3, 3, 5, 0, 0, // jaleco jf-11/jf-14
152, 2, 3, 5, 5, 0, 0,
153, 5, 5, 0, 0, 1, 1, // (famicom jump ii) [sram r/w]
154, 3, 3, 5, 5, 0, 0, // namcot-3453 (devil man)
155, 3, 3, 3, 5, 0, 1, // mmc1 variant [sram r/w]
159, 3, 4, 5, 6, 1, 1, // bandai x24c01 [eep r/w]
180, 3, 3, 0, 0, 0, 0, // unrom variant (crazy climber)
184, 1, 1, 2, 3, 0, 0, // sunsoft 1
185, 0, 1, 1, 1, 0, 0, // cnrom lockout
206, 1, 3, 2, 4, 0, 0, // dxrom
207, 4, 4, 5, 5, 0, 0, // taito x1-005 variant (fudou myouou den)
210, 3, 5, 5, 6, 0, 0, // namco 175/340
};
/******************************************
Defines
*****************************************/
#define ROMSEL_HI PORTF |= (1<<1)
#define ROMSEL_LOW PORTF &= ~(1<<1)
#define PHI2_HI PORTF |= (1<<0)
#define PHI2_LOW PORTF &= ~(1<<0)
#define PRG_READ PORTF |= (1<<7)
#define PRG_WRITE PORTF &= ~(1<<7)
#define CHR_READ_HI PORTF |= (1<<5)
#define CHR_READ_LOW PORTF &= ~(1<<5)
#define CHR_WRITE_HI PORTF |= (1<<2)
#define CHR_WRITE_LOW PORTF &= ~(1<<2)
// RGB LED COMMON ANODE
#define LED_RED_OFF PORTB |= (1<<6)
#define LED_RED_ON PORTB &= ~(1<<6)
#define LED_GREEN_OFF PORTB |= (1<<5)
#define LED_GREEN_ON PORTB &= ~(1<<5)
#define LED_BLUE_OFF PORTB |= (1<<4)
#define LED_BLUE_ON PORTB &= ~(1<<4)
#define MODE_READ { PORTK = 0xFF; DDRK = 0; }
#define MODE_WRITE DDRK = 0xFF
#define press 1
#define doubleclick 2
#define hold 3
#define longhold 4
/******************************************
Variables
*****************************************/
// Mapper
byte mapcount = (sizeof(mapsize) / sizeof(mapsize[0])) / 7;
boolean mapfound = false;
byte mapselect;
int PRG[] = {16, 32, 64, 128, 256, 512};
byte prglo = 0; // Lowest Entry
byte prghi = 5; // Highest Entry
int CHR[] = {0, 8, 16, 32, 64, 128, 256, 512};
byte chrlo = 0; // Lowest Entry
byte chrhi = 7; // Highest Entry
byte RAM[] = {0, 8, 16, 32};
byte ramlo = 0; // Lowest Entry
byte ramhi = 3; // Highest Entry
int banks;
int prg;
int chr;
byte ram;
boolean vrc4e = false;
byte prgchk0;
byte prgchk1;
boolean mmc6 = false;
byte prgchk2;
byte prgchk3;
int eepsize;
byte bytecheck;
byte firstbyte;
char flashID[5];
boolean flashfound = false; // NESmaker 39SF040 Flash Cart
// Files
FsFile sdFile;
char fileCount[3];
FsFile nesFile;
uint32_t prg_crc32;
uint32_t chr_crc32;
char filePRG[] = "PRG.bin";
char fileCHR[] = "CHR.bin";
char fileNES[] = "CART.nes";
2021-02-01 02:12:40 +01:00
char fileBIN[] = "CART.bin";
// Cartridge Config
byte mapper;
byte newmapper;
byte prgsize;
byte newprgsize;
byte chrsize;
byte newchrsize;
byte ramsize;
byte newramsize;
// Button
int b = 0;
/******************************************
Menu
*****************************************/
static const char menuItem1[] PROGMEM = "Select Mapper";
static const char menuItem2[] PROGMEM = "Read Complete Cart";
static const char menuItem3[] PROGMEM = "Read PRG";
static const char menuItem4[] PROGMEM = "Read CHR";
static const char menuItem5[] PROGMEM = "Read RAM";
static const char menuItem6[] PROGMEM = "Write Options";
static const char* const baseMenu[] PROGMEM = {menuItem1, menuItem2, menuItem3, menuItem4, menuItem5, menuItem6};
static const char writeItem1[] PROGMEM = "Write RAM";
static const char writeItem2[] PROGMEM = "Write FLASH";
static const char writeItem3[] PROGMEM = "Return to Main Menu";
static const char* const writeMenu[] PROGMEM = {writeItem1, writeItem2, writeItem3};
// NES start menu
void nesMenu() {
display_Clear();
display_Update();
setup_NES();
checkStatus_NES();
nesCartMenu();
mode = mode_NES;
}
void nesCartMenu() {
// create menu with title "NES CART READER" and 6 options to choose from
convertPgm(baseMenu, 6);
unsigned char answer = question_box(F("NES CART READER"), menuOptions, 6, 0);
// wait for user choice to come back from the question box menu
switch (answer) {
// Select Mapper
case 0:
setMapper();
checkMapperSize();
setPRGSize();
setCHRSize();
setRAMSize();
break;
// Read Complete Cart
case 1:
CartStart();
readPRG();
delay(2000);
readCHR();
delay(2000);
outputNES();
delay(2000);
readRAM();
delay(2000);
resetROM();
CartFinish();
break;
// Read PRG
case 2:
CreateROMFolderInSD();
readPRG();
resetROM();
wait();
break;
// Read CHR
case 3:
CreateROMFolderInSD();
readCHR();
resetROM();
wait();
break;
// Read RAM
case 4:
CreateROMFolderInSD();
readRAM();
resetROM();
wait();
break;
// Write Options
case 5:
nesCartWriteMenu();
wait();
break;
}
}
void nesCartWriteMenu() {
// create menu with title "WRITE OPTIONS MENU" and 3 options to choose from
convertPgm(writeMenu, 3);
unsigned char answer = question_box(F("WRITE OPTIONS MENU"), menuOptions, 3, 0);
// wait for user choice to come back from the question box menu
switch (answer) {
// Write RAM
case 0:
writeRAM();
resetROM();
wait();
break;
// Write FLASH
case 1:
if (mapper == 30)
writeFLASH();
resetROM();
wait();
break;
// Return to Main Menu
case 2:
nesCartMenu();
wait();
break;
}
}
/******************************************
Setup
*****************************************/
void setup_NES() {
// CPU R/W, IRQ, PPU /RD, PPU /A13, CIRAM /CE, PPU /WR, /ROMSEL, PHI2
DDRF = 0b10110111;
// CPU R/W, IRQ, PPU /RD, PPU /A13, CIRAM /CE, PPU /WR, /ROMSEL, PHI2
PORTF = 0b11111111;
// A0-A7 to Output
DDRL = 0xFF;
// A8-A14 to Output
DDRA = 0xFF;
// Set CIRAM A10 to Input
DDRC &= ~(1 << 2);
// Activate Internal Pullup Resistors
PORTC |= (1 << 2);
// Set D0-D7 to Input
PORTK = 0xFF;
DDRK = 0;
set_address(0);
LED_RED_OFF;
LED_GREEN_OFF;
LED_BLUE_OFF;
}
/******************************************
Low Level Functions
*****************************************/
static void phi2_init() {
int i = 0x80;
unsigned char h = PORTF |= (1 << 0);
unsigned char l = PORTF &= ~(1 << 0);
while (i != 0) {
PORTL = l;
PORTL = h;
i--;
}
}
static void set_address(unsigned int address) {
unsigned char l = address & 0xFF;
unsigned char h = address >> 8;
PORTL = l;
PORTA = h;
// PPU /A13
if ((address >> 13) & 1)
PORTF &= ~(1 << 4);
else
PORTF |= 1 << 4;
}
static void set_romsel(unsigned int address) {
if (address & 0x8000) {
ROMSEL_LOW;
} else {
ROMSEL_HI;
}
}
static unsigned char read_prg_byte(unsigned int address) {
MODE_READ;
PRG_READ;
set_address(address);
PHI2_HI;
set_romsel(address);
_delay_us(1);
return PINK;
}
static unsigned char read_chr_byte(unsigned int address) {
MODE_READ;
PHI2_HI;
ROMSEL_HI;
set_address(address);
CHR_READ_LOW;
_delay_us(1);
uint8_t result = PINK;
CHR_READ_HI;
return result;
}
static void write_prg_byte(unsigned int address, uint8_t data) {
PHI2_LOW;
ROMSEL_HI;
MODE_WRITE;
PRG_WRITE;
PORTK = data;
set_address(address); // PHI2 low, ROMSEL always HIGH
// _delay_us(1);
PHI2_HI;
//_delay_us(10);
set_romsel(address); // ROMSEL is low if need, PHI2 high
_delay_us(1); // WRITING
//_delay_ms(1); // WRITING
// PHI2 low, ROMSEL high
PHI2_LOW;
_delay_us(1);
ROMSEL_HI;
// Back to read mode
// _delay_us(1);
PRG_READ;
MODE_READ;
set_address(0);
// Set phi2 to high state to keep cartridge unreseted
// _delay_us(1);
PHI2_HI;
// _delay_us(1);
}
static void write_chr_byte(unsigned int address, uint8_t data) {
PHI2_LOW;
ROMSEL_HI;
MODE_WRITE;
PORTK = data;
set_address(address); // PHI2 low, ROMSEL always HIGH
//_delay_us(10);
CHR_WRITE_LOW;
_delay_us(1); // WRITING
//_delay_ms(1); // WRITING
CHR_WRITE_HI;
//_delay_us(1);
MODE_READ;
set_address(0);
PHI2_HI;
//_delay_us(1);
}
static void write_prg(unsigned int address, unsigned int len, uint8_t* data) {
LED_RED_ON;
while (len > 0) {
write_prg_byte(address, *data);
address++;
len--;
data++;
}
//_delay_ms(1);
LED_RED_OFF;
}
static void write_chr(unsigned int address, unsigned int len, uint8_t* data) {
LED_RED_ON;
while (len > 0) {
write_chr_byte(address, *data);
address++;
len--;
data++;
}
//_delay_ms(1);
LED_RED_OFF;
}
static void reset_phi2() {
LED_RED_ON;
LED_GREEN_ON;
PHI2_LOW;
ROMSEL_HI;
_delay_ms(100);
PHI2_HI;
LED_RED_OFF;
LED_GREEN_OFF;
}
void resetROM() {
set_address(0);
PHI2_HI;
ROMSEL_HI;
}
void write_mmc1_byte(unsigned int address, uint8_t data) { // write loop for 5 bit register
if (address >= 0xE000) {
for (int i = 0; i < 5; i++) {
write_reg_byte(address, data >> i); // shift 1 bit into temp register [WRITE RAM SAFE]
}
}
else {
for (int j = 0; j < 5; j++) {
write_prg_byte(address, data >> j); // shift 1 bit into temp register
}
}
}
// REFERENCE FOR REGISTER WRITE TO 0xE000/0xF000
// PORTF 7 = CPU R/W = 0
// PORTF 6 = /IRQ = 1
// PORTF 5 = PPU /RD = 1
// PORTF 4 = PPU /A13 = 1
// PORTF 3 = CIRAM /CE = 1
// PORTF 2 = PPU /WR = 1
// PORTF 1 = /ROMSEL
// PORTF 0 = PHI2 (M2)
// WRITE RAM SAFE TO REGISTERS 0xE000/0xF000
static void write_reg_byte(unsigned int address, uint8_t data) { // FIX FOR MMC1 RAM CORRUPTION
PHI2_LOW;
ROMSEL_HI; // A15 HI = E000
MODE_WRITE;
PRG_WRITE; // CPU R/W LO
PORTK = data;
set_address(address); // PHI2 low, ROMSEL always HIGH
// DIRECT PIN TO PREVENT RAM CORRUPTION
// DIFFERENCE BETWEEN M2 LO AND ROMSEL HI MUST BE AROUND 33ns
// IF TIME IS GREATER THAN 33ns THEN WRITES TO 0xE000/0xF000 WILL CORRUPT RAM AT 0x6000/0x7000
PORTF = 0b01111101; // ROMSEL LO/M2 HI
PORTF = 0b01111110; // ROMSEL HI/M2 LO
_delay_us(1);
// Back to read mode
PRG_READ;
MODE_READ;
set_address(0);
// Set phi2 to high state to keep cartridge unreseted
PHI2_HI;
}
static void write_ram_byte(unsigned int address, uint8_t data) { // Mapper 19 (Namco 106/163) WRITE RAM SAFE ($E000-$FFFF)
PHI2_LOW;
ROMSEL_HI;
MODE_WRITE;
PRG_WRITE;
PORTK = data;
set_address(address); // PHI2 low, ROMSEL always HIGH
PHI2_HI;
ROMSEL_LOW; // SET /ROMSEL LOW OTHERWISE CORRUPTS RAM
_delay_us(1); // WRITING
// PHI2 low, ROMSEL high
PHI2_LOW;
_delay_us(1);
ROMSEL_HI;
// Back to read mode
PRG_READ;
MODE_READ;
set_address(0);
// Set phi2 to high state to keep cartridge unreseted
PHI2_HI;
}
static void write_wram_byte(unsigned int address, uint8_t data) { // Mapper 5 (MMC5) RAM
PHI2_LOW;
ROMSEL_HI;
set_address(address);
PORTK = data;
_delay_us(1);
MODE_WRITE;
PRG_WRITE;
PHI2_HI;
_delay_us(1); // WRITING
PHI2_LOW;
ROMSEL_HI;
// Back to read mode
PRG_READ;
MODE_READ;
set_address(0);
// Set phi2 to high state to keep cartridge unreseted
PHI2_HI;
}
int int_pow(int base, int exp) { // Power for int
int result = 1;
while (exp) {
if (exp & 1)
result *= base;
exp /= 2;
base *= base;
}
return result;
}
/******************************************
CRC Functions
*****************************************/
FsFile crcFile;
char tempCRC[9];
inline uint32_t updateCRC32(uint8_t ch, uint32_t crc) {
uint32_t idx = ((crc) ^ (ch)) & 0xff;
uint32_t tab_value = pgm_read_dword(crc_32_tab + idx);
return tab_value ^ ((crc) >> 8);
}
uint32_t crc32(FsFile &file, uint32_t &charcnt) {
uint32_t oldcrc32 = 0xFFFFFFFF;
charcnt = 0;
while (file.available()) {
crcFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
uint8_t c = sdBuffer[x];
charcnt++;
oldcrc32 = updateCRC32(c, oldcrc32);
}
}
return ~oldcrc32;
}
uint32_t crc32EEP(FsFile &file, uint32_t &charcnt) {
uint32_t oldcrc32 = 0xFFFFFFFF;
charcnt = 0;
while (file.available()) {
crcFile.read(sdBuffer, 128);
for (int x = 0; x < 128; x++) {
uint8_t c = sdBuffer[x];
charcnt++;
oldcrc32 = updateCRC32(c, oldcrc32);
}
}
return ~oldcrc32;
}
void calcCRC(char* checkFile, unsigned long filesize, uint32_t* crcCopy, unsigned long offset) {
uint32_t crc;
crcFile = sd.open(checkFile);
crcFile.seek(offset);
if (filesize < 1024)
crc = crc32EEP(crcFile, filesize);
else
crc = crc32(crcFile, filesize);
crcFile.close();
sprintf(tempCRC, "%08lX", crc);
if (crcCopy != NULL) {
*crcCopy = crc;
}
print_Msg(F("CRC: "));
println_Msg(tempCRC);
display_Update();
}
/******************************************
File Functions
*****************************************/
void CreateROMFolderInSD() {
sd.chdir();
sprintf(folder, "NES/ROM");
sd.mkdir(folder, true);
sd.chdir(folder);
}
void CreatePRGFileInSD() {
strcpy(fileName, "PRG");
strcat(fileName, ".bin");
for (byte i = 0; i < 100; i++) {
if (!sd.exists(fileName)) {
sdFile = sd.open(fileName, O_RDWR | O_CREAT);
break;
}
sprintf(fileCount, "%02d", i);
strcpy(fileName, "PRG.");
strcat(fileName, fileCount);
strcat(fileName, ".bin");
}
if (!sdFile) {
LED_RED_ON;
display_Clear();
println_Msg(F("PRG FILE FAILED!"));
display_Update();
print_Error(F("SD Error"), true);
LED_RED_OFF;
}
}
void CreateCHRFileInSD() {
strcpy(fileName, "CHR");
strcat(fileName, ".bin");
for (byte i = 0; i < 100; i++) {
if (!sd.exists(fileName)) {
sdFile = sd.open(fileName, O_RDWR | O_CREAT);
break;
}
sprintf(fileCount, "%02d", i);
strcpy(fileName, "CHR.");
strcat(fileName, fileCount);
strcat(fileName, ".bin");
}
if (!sdFile) {
LED_RED_ON;
display_Clear();
println_Msg(F("CHR FILE FAILED!"));
display_Update();
print_Error(F("SD Error"), true);
LED_RED_OFF;
}
}
void CreateRAMFileInSD() {
strcpy(fileName, "RAM");
strcat(fileName, ".bin");
for (byte i = 0; i < 100; i++) {
if (!sd.exists(fileName)) {
sdFile = sd.open(fileName, O_RDWR | O_CREAT);
break;
}
sprintf(fileCount, "%02d", i);
strcpy(fileName, "RAM.");
strcat(fileName, fileCount);
strcat(fileName, ".bin");
}
if (!sdFile) {
LED_RED_ON;
display_Clear();
println_Msg(F("RAM FILE FAILED!"));
display_Update();
print_Error(F("SD Error"), true);
LED_RED_OFF;
}
}
void outputNES() {
display_Clear();
2021-02-01 02:12:40 +01:00
char* outputFile;
unsigned long crcOffset = 0;
2021-02-08 04:07:47 +01:00
uint32_t prg_size_bytes = 1024 * (uint32_t)prg;
uint32_t chr_size_bytes = 1024 * (uint32_t)chr;
int has_header = 0;
2021-02-08 04:07:47 +01:00
unsigned char* nes_header_bytes = getNESHeaderForFileInfo(prg_size_bytes, chr_size_bytes, prg_crc32, chr_crc32);
if (nes_header_bytes != NULL) {
has_header = 1;
}
LED_RED_ON;
LED_GREEN_ON;
LED_BLUE_ON;
if (!sdFile.open(filePRG, FILE_READ)) {
LED_GREEN_OFF;
LED_BLUE_OFF;
display_Clear();
println_Msg(F("PRG FILE FAILED!"));
display_Update();
print_Error(F("SD Error"), true);
}
2021-02-01 02:12:40 +01:00
2021-02-08 04:07:47 +01:00
if (has_header) {
2021-02-01 02:12:40 +01:00
outputFile = fileNES;
crcOffset = 16;
2021-02-01 02:12:40 +01:00
} else {
outputFile = fileBIN;
}
if (!sd.exists(outputFile)) {
nesFile = sd.open(outputFile, O_RDWR | O_CREAT);
}
if (!nesFile) {
LED_GREEN_OFF;
LED_BLUE_OFF;
display_Clear();
println_Msg(F("NES FILE FAILED!"));
display_Update();
print_Error(F("SD Error"), true);
}
2021-02-08 04:07:47 +01:00
if (has_header)
{
nesFile.write(nes_header_bytes, 16);
free(nes_header_bytes);
display_Clear();
println_Msg(F("SET HEADER"));
display_Update();
}
size_t n;
while ((n = sdFile.read(sdBuffer, sizeof(sdBuffer))) > 0) {
nesFile.write(sdBuffer, n);
}
sdFile.close();
if (sd.exists(fileCHR)) {
if (!sdFile.open(fileCHR, FILE_READ)) {
LED_GREEN_OFF;
LED_BLUE_OFF;
display_Clear();
println_Msg(F("CHR FILE FAILED!"));
display_Update();
print_Error(F("SD Error"), true);
}
while ((n = sdFile.read(sdBuffer, sizeof(sdBuffer))) > 0) {
nesFile.write(sdBuffer, n);
}
sdFile.close();
}
nesFile.flush();
nesFile.close();
display_Clear();
2021-02-08 04:07:47 +01:00
if (has_header) {
println_Msg(F("NES FILE OUTPUT!"));
} else {
println_Msg(F("BIN FILE OUTPUT!"));
}
println_Msg(F(""));
display_Update();
calcCRC(outputFile, (prg + chr) * 1024, NULL, crcOffset);
LED_RED_OFF;
LED_GREEN_OFF;
LED_BLUE_OFF;
}
void CartStart() {
sd.chdir();
EEPROM_readAnything(0, foldern); // FOLDER #
sprintf(folder, "NES/CART/%d", foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
}
void CartFinish() {
foldern += 1;
EEPROM_writeAnything(0, foldern); // FOLDER #
sd.chdir();
}
/******************************************
NES 2.0 Header Functions
*****************************************/
2021-02-08 04:07:47 +01:00
unsigned char* getNESHeaderForFileInfo(uint32_t prg_size, uint32_t chr_size, uint32_t prg_crc32, uint32_t chr_crc32) {
if (prg_size == 0) {
return NULL;
}
2021-01-24 23:20:05 +01:00
char* temp_line;
char* nes20_header;
int i;
if (!sdFile.open("/nes20db.txt", FILE_READ)) {
return NULL;
} else {
display_Clear();
println_Msg(F("SEARCHING DB"));
display_Update();
}
2021-01-24 23:20:05 +01:00
temp_line = malloc(256 * sizeof(char));
while (sdFile.available()) {
// We're reading fixed-length lines
// padded with null characters
sdFile.read(temp_line, 256);
2021-02-08 04:07:47 +01:00
uint32_t prg_size_db;
uint32_t chr_size_db;
uint32_t prg_crc32_db;
uint32_t chr_crc32_db;
// Match PRG and CHR sizes first, then
// match PRG CRC32 and, if the CHR size
// is greater than zero, the CHR CRC32
// as well.
prg_size_db = getPRGSizeFromDatabaseRow(temp_line);
if (prg_size == prg_size_db) {
chr_size_db = getCHRSizeFromDatabaseRow(temp_line);
if (chr_size == chr_size_db) {
prg_crc32_db = getPRGCRC32FromDatabaseRow(temp_line);
if (prg_crc32 == prg_crc32_db) {
if (chr_size == 0) {
nes20_header = getNES20HeaderBytesFromDatabaseRow(temp_line);
free(temp_line);
sdFile.close();
return nes20_header;
} else {
chr_crc32_db = getCHRCRC32FromDatabaseRow(temp_line);
if (chr_crc32 == chr_crc32_db) {
nes20_header = getNES20HeaderBytesFromDatabaseRow(temp_line);
free(temp_line);
sdFile.close();
return nes20_header;
}
}
}
}
}
}
free(temp_line);
sdFile.close();
return NULL;
}
// IMPORTANT: The string returned from this function MUST
// be passed to free() when ready to be disposed of, in
// order to avoid a memory leak.
char* getDatabaseFieldFromRow(const char* dbstr, uint8_t fieldnum) {
uint8_t field_start_pos = 0;
uint8_t field_end_pos = 1;
uint8_t current_field = 0;
char* return_field;
// Field order, beginning with field 0:
// PRG Size, CHR Size, PRG CRC32, CHR CRC32, Game Title, NES 2.0 Header (as ASCII)
//
// Each entry is on its own line, with a field delimeter of ^^
// I'm assuming that nothing will ever use ^^ in a game title, but it's possible
// that could be wrong, in which case a different field delimeter would need
// to be used, and the logic here updated.
if (dbstr == NULL || fieldnum > 5) {
return NULL;
}
if (dbstr[0] == 0 || dbstr[0] == '\n') {
return NULL;
}
for (; field_end_pos < 255 && current_field < fieldnum; field_end_pos++) {
if (field_start_pos < 254 && dbstr[field_start_pos] == '^' && dbstr[field_start_pos + 1] == '^') {
current_field++;
field_start_pos = field_end_pos;
field_end_pos = field_start_pos + 1;
}
if (current_field < fieldnum && dbstr[field_end_pos - 1] == '^' && dbstr[field_end_pos] == '^' || dbstr[field_end_pos] == 0 || dbstr[field_end_pos] == '\n') {
current_field++;
field_start_pos = field_end_pos + 1;
field_end_pos = field_start_pos + 1;
}
}
field_end_pos = field_start_pos;
while ((dbstr[field_end_pos - 1] != '^' || dbstr[field_end_pos] != '^') && dbstr[field_end_pos] != 0 && dbstr[field_end_pos] != '\n') {
field_end_pos++;
}
if (dbstr[field_end_pos] == '^') {
field_end_pos = field_end_pos - 2;
} else {
field_end_pos = field_end_pos - 1;
}
if ((field_end_pos - field_start_pos + 2) == 0) {
return NULL;
}
return_field = (char*)malloc((field_end_pos - field_start_pos + 2) * sizeof(char));
memcpy(return_field, &dbstr[field_start_pos], field_end_pos - field_start_pos + 1);
return_field[(field_end_pos - field_start_pos) + 1] = 0;
return return_field;
}
unsigned char getNibbleFromChar(char num) {
char ret_char = num & 0x0F;
if (num > '9') {
ret_char += 9;
}
2021-01-24 11:08:02 +01:00
return ret_char;
}
unsigned char getByteFromChars(char msn, char lsn) {
unsigned char return_char;
return_char = (getNibbleFromChar(msn) << 4);
return_char |= getNibbleFromChar(lsn);
return return_char;
}
// IMPORTANT: The byte array returned from this function MUST
// be passed to free() when ready to be disposed of, in
// order to avoid a memory leak.
unsigned char* strToBytes(const char* bytestr) {
uint8_t str_length;
uint8_t byte_length;
uint8_t str_idx;
uint8_t byte_idx = 0;
unsigned char* byte_arr;
if (bytestr == NULL) {
return NULL;
}
str_length = (uint8_t)strlen(bytestr);
if (str_length % 2 != 0) {
return NULL;
}
byte_length = str_length / 2;
byte_arr = (unsigned char*)malloc(byte_length * sizeof(unsigned char));
for (str_idx = 0; str_idx < str_length && bytestr[str_idx] != 0; str_idx = str_idx + 2) {
if (!isxdigit(bytestr[str_idx]) || !isxdigit(bytestr[str_idx + 1])) {
free(byte_arr);
return NULL;
}
byte_arr[byte_idx] = getByteFromChars(bytestr[str_idx], bytestr[str_idx + 1]);
byte_idx++;
}
return byte_arr;
}
uint32_t crc32FromBytes(const unsigned char* bytearr) {
if (bytearr == NULL) {
return 0;
}
return (uint32_t)(((uint32_t)bytearr[0] << 24) | ((uint32_t)bytearr[1] << 16) | ((uint32_t)bytearr[2] << 8) | (uint32_t)bytearr[3]);
}
2021-02-08 04:07:47 +01:00
uint32_t getPRGSizeFromDatabaseRow(const char* crctest) {
char* prg_size_str = getDatabaseFieldFromRow(crctest, 0);
if (prg_size_str == NULL) {
return 0;
}
uint32_t return_size = atoi32_unsigned(prg_size_str);
free(prg_size_str);
return return_size;
}
2021-02-08 04:07:47 +01:00
uint32_t getCHRSizeFromDatabaseRow(const char* crctest) {
char* chr_size_str = getDatabaseFieldFromRow(crctest, 1);
if (chr_size_str == NULL) {
return 0;
}
uint32_t return_size = atoi32_unsigned(chr_size_str);
free(chr_size_str);
return return_size;
}
uint32_t getPRGCRC32FromDatabaseRow(const char* crctest) {
char* prg_crc32_str = getDatabaseFieldFromRow(crctest, 2);
if (prg_crc32_str == NULL) {
return 0;
}
unsigned char* prg_crc32_bytes = strToBytes(prg_crc32_str);
free(prg_crc32_str);
if (prg_crc32_bytes == NULL) {
return 0;
}
uint32_t prg_crc32 = crc32FromBytes(prg_crc32_bytes);
free(prg_crc32_bytes);
return prg_crc32;
}
uint64_t getCHRCRC32FromDatabaseRow(const char* crctest) {
char* chr_crc32_str = getDatabaseFieldFromRow(crctest, 3);
if (chr_crc32_str == NULL) {
return 0;
}
unsigned char* chr_crc32_bytes = strToBytes(chr_crc32_str);
free(chr_crc32_str);
if (chr_crc32_bytes == NULL) {
return 0;
}
uint32_t chr_crc32 = crc32FromBytes(chr_crc32_bytes);
free(chr_crc32_bytes);
return chr_crc32;
}
// IMPORTANT: As with getDatabaseFieldFromRow(), the string
// returned from this function must be passed to free() after
// it's no longer needed in order to avoid a memory leak.
char* getGameTitleFromDatabaseRow(const char* crctest) {
char* game_title_str = getDatabaseFieldFromRow(crctest, 4);
return game_title_str;
}
// IMPORTANT: The byte array returned from this function MUST
// be passed to free() when ready to be disposed of, in
// order to avoid a memory leak.
unsigned char* getNES20HeaderBytesFromDatabaseRow(const char* crctest) {
char* nes_header_str = getDatabaseFieldFromRow(crctest, 5);
if (nes_header_str == NULL) {
return NULL;
}
unsigned char* nes_header_bytes = strToBytes(nes_header_str);
free(nes_header_str);
if (nes_header_bytes == NULL) {
return NULL;
}
return nes_header_bytes;
}
/******************************************
Config Functions
*****************************************/
void setMapper() {
#ifdef enable_OLED
chooseMapper:
// Read stored mapper
EEPROM_readAnything(7, newmapper);
if (newmapper > 220)
newmapper = 0;
// Split into digits
byte hundreds = newmapper / 100;
byte tens = newmapper / 10 - hundreds * 10;
byte units = newmapper - hundreds * 100 - tens * 10;
// Cycle through al 3 digits
for (byte digit = 0; digit < 3; digit++) {
while (1) {
display.clearDisplay();
display.setCursor(0, 0);
display.println("Select Mapper:");
display.setCursor(23, 20);
display.println(hundreds);
display.setCursor(43, 20);
display.println(tens);
display.setCursor(63, 20);
display.println(units);
display.println("");
display.println(F("Press to Change"));
display.println(F("Hold to Select"));
if (digit == 0) {
display.drawLine(20, 30, 30, 30, WHITE);
display.drawLine(40, 30, 50, 30, BLACK);
display.drawLine(60, 30, 70, 30, BLACK);
}
else if (digit == 1) {
display.drawLine(20, 30, 30, 30, BLACK);
display.drawLine(40, 30, 50, 30, WHITE);
display.drawLine(60, 30, 70, 30, BLACK);
}
else if (digit == 2) {
display.drawLine(20, 30, 30, 30, BLACK);
display.drawLine(40, 30, 50, 30, BLACK);
display.drawLine(60, 30, 70, 30, WHITE);
}
/* Check Button
1 click
2 doubleClick
3 hold
4 longHold */
int b = checkButton();
if (b == 1) {
if (digit == 0) {
if (hundreds < 2)
hundreds++;
else
hundreds = 0;
}
else if (digit == 1) {
if (hundreds == 2) {
if (tens < 1)
tens++;
else
tens = 0;
}
else {
if (tens < 9)
tens++;
else
tens = 0;
}
}
else if (digit == 2) {
if (units < 9)
units++;
else
units = 0;
}
}
else if (b == 2) {
if (digit == 0) {
if (hundreds > 0)
hundreds--;
else
hundreds = 2;
}
else if (digit == 1) {
if (hundreds == 2) {
if (tens > 0)
tens--;
else
tens = 1;
}
else {
if (tens > 0)
tens--;
else
tens = 9;
}
}
else if (digit == 2) {
if (units > 0)
units--;
else
units = 9;
}
}
else if (b == 3) {
break;
}
display.display();
}
}
display.clearDisplay();
display.setCursor(0, 0);
newmapper = hundreds * 100 + tens * 10 + units;
// Check if valid
boolean validMapper = 0;
byte mapcount = (sizeof(mapsize) / sizeof(mapsize[0])) / 7;
for (byte currMaplist = 0; currMaplist < mapcount; currMaplist++) {
if (pgm_read_byte(mapsize + currMaplist * 7) == newmapper)
validMapper = 1;
}
if (!validMapper) {
errorLvl = 1;
display.println("Mapper not supported");
display.display();
wait();
goto chooseMapper;
}
#endif
#ifdef enable_serial
setmapper:
String newmap;
mapfound = false;
Serial.println(F("SUPPORTED MAPPERS:"));
for (int i = 0; i < mapcount; i++) {
2020-07-11 13:39:12 +02:00
int index = i * 7;
mapselect = pgm_read_byte(mapsize + index);
2019-10-17 17:14:08 +02:00
Serial.print("[");
Serial.print(mapselect);
2019-10-17 17:14:08 +02:00
Serial.print("]");
if (i < mapcount - 1) {
if ((i != 0) && ((i + 1) % 10 == 0))
Serial.println(F(""));
else
Serial.print(F("\t"));
}
else
Serial.println(F(""));
}
Serial.print(F("Enter Mapper: "));
while (Serial.available() == 0) {}
newmap = Serial.readStringUntil('\n');
Serial.println(newmap);
newmapper = newmap.toInt();
for (int i = 0; i < mapcount; i++) {
2020-07-11 13:39:12 +02:00
int index = i * 7;
mapselect = pgm_read_byte(mapsize + index);
if (newmapper == mapselect)
mapfound = true;
}
if (mapfound == false) {
Serial.println(F("MAPPER NOT SUPPORTED!"));
Serial.println(F(""));
newmapper = 0;
goto setmapper;
}
#endif
EEPROM_writeAnything(7, newmapper);
mapper = newmapper;
}
void checkMapperSize() {
for (int i = 0; i < mapcount; i++) {
2020-07-11 13:39:12 +02:00
int index = i * 7;
byte mapcheck = pgm_read_byte(mapsize + index);
if (mapcheck == mapper) {
prglo = pgm_read_byte(mapsize + index + 1);
prghi = pgm_read_byte(mapsize + index + 2);
chrlo = pgm_read_byte(mapsize + index + 3);
chrhi = pgm_read_byte(mapsize + index + 4);
ramlo = pgm_read_byte(mapsize + index + 5);
ramhi = pgm_read_byte(mapsize + index + 6);
break;
}
}
}
void setPRGSize() {
#ifdef enable_OLED
display_Clear();
if (prglo == prghi)
newprgsize = prglo;
else {
b = 0;
int i = prglo;
while (1) {
display_Clear();
print_Msg(F("PRG Size: "));
println_Msg(PRG[i]);
println_Msg(F(""));
println_Msg(F("Press to Change"));
println_Msg(F("Hold to Select"));
display_Update();
b = checkButton();
if (b == doubleclick) { // Previous
if (i == prglo)
i = prghi;
else
i--;
}
if (b == press) { // Next
if (i == prghi)
i = prglo;
else
i++;
}
if (b == hold) { // Long Press - Execute
newprgsize = i;
break;
}
}
display.setCursor(0, 56); // Display selection at bottom
}
print_Msg(F("PRG SIZE "));
print_Msg(PRG[newprgsize]);
println_Msg(F("K"));
display_Update();
delay(1000);
#endif
#ifdef enable_serial
if (prglo == prghi)
newprgsize = prglo;
else {
setprg:
String sizePRG;
for (int i = 0; i < (prghi - prglo + 1); i++) {
Serial.print(F("Select PRG Size: "));
Serial.print(i);
Serial.print(F(" = "));
Serial.print(PRG[i + prglo]);
Serial.println(F("K"));
}
Serial.print(F("Enter PRG Size: "));
while (Serial.available() == 0) {}
sizePRG = Serial.readStringUntil('\n');
Serial.println(sizePRG);
newprgsize = sizePRG.toInt() + prglo;
if (newprgsize > prghi) {
Serial.println(F("SIZE NOT SUPPORTED"));
Serial.println(F(""));
goto setprg;
}
}
Serial.print(F("PRG Size = "));
Serial.print(PRG[newprgsize]);
Serial.println(F("K"));
#endif
EEPROM_writeAnything(8, newprgsize);
prgsize = newprgsize;
}
void setCHRSize() {
#ifdef enable_OLED
display_Clear();
if (chrlo == chrhi)
newchrsize = chrlo;
else {
b = 0;
int i = chrlo;
while (1) {
display_Clear();
print_Msg(F("CHR Size: "));
println_Msg(CHR[i]);
println_Msg(F(""));
println_Msg(F("Press to Change"));
println_Msg(F("Hold to Select"));
display_Update();
b = checkButton();
if (b == doubleclick) { // Previous
if (i == chrlo)
i = chrhi;
else
i--;
}
if (b == press) { // Next
if (i == chrhi)
i = chrlo;
else
i++;
}
if (b == hold) { // Long Press - Execute
newchrsize = i;
break;
}
}
display.setCursor(0, 56); // Display selection at bottom
}
print_Msg(F("CHR SIZE "));
print_Msg(CHR[newchrsize]);
println_Msg(F("K"));
display_Update();
delay(1000);
#endif
#ifdef enable_serial
if (chrlo == chrhi)
newchrsize = chrlo;
else {
setchr:
String sizeCHR;
for (int i = 0; i < (chrhi - chrlo + 1); i++) {
Serial.print(F("Select CHR Size: "));
Serial.print(i);
Serial.print(F(" = "));
Serial.print(CHR[i + chrlo]);
Serial.println(F("K"));
}
Serial.print(F("Enter CHR Size: "));
while (Serial.available() == 0) {}
sizeCHR = Serial.readStringUntil('\n');
Serial.println(sizeCHR);
newchrsize = sizeCHR.toInt() + chrlo;
if (newchrsize > chrhi) {
Serial.println(F("SIZE NOT SUPPORTED"));
Serial.println(F(""));
goto setchr;
}
}
Serial.print(F("CHR Size = "));
Serial.print(CHR[newchrsize]);
Serial.println(F("K"));
#endif
EEPROM_writeAnything(9, newchrsize);
chrsize = newchrsize;
}
void setRAMSize() {
#ifdef enable_OLED
display_Clear();
if (ramlo == ramhi)
newramsize = ramlo;
else {
b = 0;
int i = 0;
while (1) {
display_Clear();
print_Msg(F("RAM Size: "));
if (mapper == 0)
println_Msg(RAM[i] / 4);
else if (mapper == 16)
println_Msg(RAM[i] * 32);
else if (mapper == 19) {
if (i == 2)
println_Msg(F("128"));
else
println_Msg(RAM[i]);
}
else if ((mapper == 159) || (mapper == 80))
println_Msg(RAM[i] * 16);
else if (mapper == 82)
println_Msg(i * 5);
else
println_Msg(RAM[i]);
println_Msg(F(""));
println_Msg(F("Press to Change"));
println_Msg(F("Hold to Select"));
display_Update();
b = checkButton();
if (b == doubleclick) { // Previous Mapper
if (i == 0)
i = ramhi;
else
i--;
}
if (b == press) { // Next
if (i == ramhi)
i = 0;
else
i++;
}
if (b == hold) { // Long Press - Execute
newramsize = i;
break;
}
}
display.setCursor(0, 56); // Display selection at bottom
}
if ((mapper == 16) || (mapper == 159)) {
int sizeEEP = 0;
print_Msg(F("EEPROM SIZE "));
if (mapper == 16)
sizeEEP = RAM[newramsize] * 32;
else
sizeEEP = RAM[newramsize] * 16;
print_Msg(sizeEEP);
println_Msg(F("B"));
}
else if (mapper == 19) {
print_Msg(F("RAM SIZE "));
if (newramsize == 2)
println_Msg(F("128B"));
else {
print_Msg(RAM[newramsize]);
println_Msg(F("K"));
}
}
else if (mapper == 80) {
print_Msg(F("RAM SIZE "));
print_Msg(RAM[newramsize] * 16);
println_Msg(F("B"));
}
else {
print_Msg(F("RAM SIZE "));
if (mapper == 0)
print_Msg(newramsize * 2);
else if (mapper == 82)
print_Msg(newramsize * 5);
else
print_Msg(RAM[newramsize]);
println_Msg(F("K"));
}
display_Update();
delay(1000);
#endif
#ifdef enable_serial
if (ramlo == ramhi)
newramsize = ramlo;
else {
setram:
String sizeRAM;
for (int i = 0; i < (ramhi - ramlo + 1); i++) {
Serial.print(F("Select RAM Size: "));
Serial.print(i);
Serial.print(F(" = "));
if (mapper == 0) {
Serial.println(RAM[i] / 4);
Serial.println(F("K"));
}
else if ((mapper == 16) || (mapper == 159)) {
if (mapper == 16)
Serial.print(RAM[i + ramlo] * 32);
else
Serial.print(RAM[i + ramlo] * 16);
Serial.println(F("B"));
}
else if (mapper == 19) {
if (i == 2)
Serial.println(F("128B"));
else {
Serial.print(RAM[i + ramlo]);
Serial.println(F("K"));
}
}
else {
Serial.print(RAM[i + ramlo]);
Serial.println(F("K"));
}
}
Serial.print(F("Enter RAM Size: "));
while (Serial.available() == 0) {}
sizeRAM = Serial.readStringUntil('\n');
Serial.println(sizeRAM);
newramsize = sizeRAM.toInt() + ramlo;
if (newramsize > ramhi) {
Serial.println(F("SIZE NOT SUPPORTED"));
Serial.println(F(""));
goto setram;
}
}
if ((mapper == 16) || (mapper == 159)) {
int sizeEEP = 0;
Serial.print(F("EEPROM Size = "));
if (mapper == 16)
sizeEEP = RAM[newramsize] * 32;
else
sizeEEP = RAM[newramsize] * 16;
Serial.print(sizeEEP);
Serial.println(F("B"));
Serial.println(F(""));
}
else if (mapper == 19) {
Serial.print(F("RAM Size = "));
if (newramsize == 2)
Serial.println(F("128B"));
else {
Serial.print(RAM[newramsize]);
Serial.println(F("K"));
}
Serial.println(F(""));
}
else if (mapper == 80) {
Serial.print(F("RAM Size = "));
Serial.print(RAM[newramsize] * 16);
Serial.println(F("B"));
Serial.println(F(""));
}
else {
Serial.print(F("RAM Size = "));
if (mapper == 0)
Serial.print(newramsize * 2);
else if (mapper == 82)
Serial.print(newramsize * 5);
else
Serial.print(RAM[newramsize]);
Serial.println(F("K"));
Serial.println(F(""));
}
#endif
EEPROM_writeAnything(10, newramsize);
ramsize = newramsize;
}
// MMC6 Detection
// Mapper 4 includes both MMC3 AND MMC6
// RAM is mapped differently between MMC3 and MMC6
void checkMMC6() { // Detect MMC6 Carts - read PRG 0x3E00A ("STARTROPICS")
write_prg_byte(0x8000, 6); // PRG Bank 0 ($8000-$9FFF)
write_prg_byte(0x8001, 0x1F); // 0x3E000
prgchk0 = read_prg_byte(0x800A);
prgchk1 = read_prg_byte(0x800B);
prgchk2 = read_prg_byte(0x800C);
prgchk3 = read_prg_byte(0x800D);
if ((prgchk0 == 0x53) && (prgchk1 == 0x54) && (prgchk2 == 0x41) && (prgchk3 == 0x52))
mmc6 = true; // MMC6 Cart
}
void checkStatus_NES() {
EEPROM_readAnything(7, mapper);
EEPROM_readAnything(8, prgsize);
EEPROM_readAnything(9, chrsize);
EEPROM_readAnything(10, ramsize);
prg = (int_pow(2, prgsize)) * 16;
if (chrsize == 0)
chr = 0; // 0K
else
chr = (int_pow(2, chrsize)) * 4;
if (ramsize == 0)
ram = 0; // 0K
else if (mapper == 82)
ram = 5; // 5K
else
ram = (int_pow(2, ramsize)) * 4;
// Mapper Variants
// Identify variant for use across multiple functions
if (mapper == 4) { // Check for MMC6/MMC3
checkMMC6();
if (mmc6)
ram = 1; // 1K
}
else if (mapper == 30) // Check for Flashable/Non-Flashable
NESmaker_ID(); // Flash ID
display_Clear();
println_Msg(F("NES CART READER"));
println_Msg(F("CURRENT SETTINGS"));
println_Msg(F(""));
print_Msg(F("MAPPER: "));
println_Msg(mapper);
print_Msg(F("PRG SIZE: "));
print_Msg(prg);
println_Msg(F("K"));
print_Msg(F("CHR SIZE: "));
print_Msg(chr);
println_Msg(F("K"));
print_Msg(F("RAM SIZE: "));
if (mapper == 0) {
print_Msg(ram / 4);
println_Msg(F("K"));
}
else if ((mapper == 16) || (mapper == 80) || (mapper == 159)) {
if (mapper == 16)
print_Msg(ram * 32);
else
print_Msg(ram * 16);
println_Msg(F("B"));
}
else if (mapper == 19) {
if (ramsize == 2)
println_Msg(F("128B"));
else {
print_Msg(ram);
println_Msg(F("K"));
}
}
else {
print_Msg(ram);
println_Msg(F("K"));
}
display_Update();
wait();
}
/******************************************
ROM Functions
*****************************************/
void dumpPRG(word base, word address) {
for (int x = 0; x < 512; x++) {
sdBuffer[x] = read_prg_byte(base + address + x);
}
sdFile.write(sdBuffer, 512);
}
void dumpCHR(word address) {
for (int x = 0; x < 512; x++) {
sdBuffer[x] = read_chr_byte(address + x);
}
sdFile.write(sdBuffer, 512);
}
void dumpMMC5RAM(word base, word address) { // MMC5 SRAM DUMP - PULSE M2 LO/HI
for (int x = 0; x < 512; x++) {
PHI2_LOW;
sdBuffer[x] = read_prg_byte(base + address + x);
}
sdFile.write(sdBuffer, 512);
}
void writeMMC5RAM(word base, word address) { // MMC5 SRAM WRITE
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
do {
write_prg_byte(0x5102, 2); // PRG RAM PROTECT1
write_prg_byte(0x5103, 1); // PRG RAM PROTECT2
write_wram_byte(base + address + x, sdBuffer[x]);
bytecheck = read_prg_byte(base + address + x);
}
while (bytecheck != sdBuffer[x]); // CHECK WRITTEN BYTE
}
write_prg_byte(0x5102, 0); // PRG RAM PROTECT1
write_prg_byte(0x5103, 0); // PRG RAM PROTECT2
}
void readPRG() {
display_Clear();
display_Update();
LED_BLUE_ON;
set_address(0);
_delay_us(1);
CreatePRGFileInSD();
word base = 0x8000;
if (sdFile) {
switch (mapper) {
case 0:
case 3:
case 13:
case 87: // 16K/32K
case 184: // 32K
case 185: // 16K/32K
for (word address = 0; address < ((prgsize * 0x4000) + 0x4000); address += 512) { // 16K or 32K
dumpPRG(base, address);
}
break;
case 1:
case 155: // 32K/64K/128K/256K/512K
banks = int_pow(2, prgsize) - 1;
for (int i = 0; i < banks; i++) { // 16K Banks ($8000-$BFFF)
write_prg_byte(0x8000, 0x80); // Clear Register
write_mmc1_byte(0x8000, 0x0C); // Switch 16K Bank ($8000-$BFFF) + Fixed Last Bank ($C000-$FFFF)
if (prgsize > 4) // 512K
write_mmc1_byte(0xA000, 0x00); // Reset 512K Flag for Lower 256K
if (i > 15) // Switch Upper 256K
write_mmc1_byte(0xA000, 0x10); // Set 512K Flag
write_mmc1_byte(0xE000, i);
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
for (word address = 0x4000; address < 0x8000; address += 512) { // Final Bank ($C000-$FFFF)
dumpPRG(base, address);
}
break;
case 2: // 128K/256K
for (int i = 0; i < 8; i++) { // 128K/256K
write_prg_byte(0x8000, i);
for (word address = 0x0; address < (((prgsize - 3) * 0x4000) + 0x4000); address += 512) {
dumpPRG(base, address);
}
}
break;
case 4:
case 47:
case 118:
case 119:
banks = ((int_pow(2, prgsize) * 2)) - 2; // Set Number of Banks
if (mapper == 47)
write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable
for (int i = 0; i < banks; i += 2) { // 32K/64K/128K/256K/512K
if (mapper == 47) {
if (i == 0)
write_prg_byte(0x6000, 0); // Switch to Lower Block
else if (i == 16)
write_prg_byte(0x6000, 1); // Switch to Upper Block
}
write_prg_byte(0x8000, 6); // PRG Bank 0 ($8000-$9FFF)
write_prg_byte(0x8001, i);
write_prg_byte(0x8000, 7); // PRG Bank 1 ($A000-$BFFF)
write_prg_byte(0x8001, i + 1);
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
for (word address = 0x4000; address < 0x8000; address += 512) { // Final 2 Banks ($C000-$FFFF)
dumpPRG(base, address);
}
break;
case 5: // 128K/256K/512K
banks = int_pow(2, prgsize) * 2;
write_prg_byte(0x5100, 3); // 8K PRG Banks
for (int i = 0; i < banks; i += 2) { // 128K/256K/512K
write_prg_byte(0x5114, i | 0x80);
write_prg_byte(0x5115, (i + 1) | 0x80);
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
break;
case 7: // 128K/256K
case 34:
case 77:
case 96: // 128K
banks = int_pow(2, prgsize) / 2;
for (int i = 0; i < banks; i++) { // 32K Banks
write_prg_byte(0x8000, i);
for (word address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF)
dumpPRG(base, address);
}
}
break;
case 9: // 128K
for (int i = 0; i < 13; i++) { // 16-3 = 13 = 128K
write_prg_byte(0xA000, i); // $8000-$9FFF
for (word address = 0x0; address < 0x2000; address += 512) { // Switch Bank ($8000-$9FFF)
dumpPRG(base, address);
}
}
for (word address = 0x2000; address < 0x8000; address += 512) { // Final 3 Banks ($A000-$FFFF)
dumpPRG(base, address);
}
break;
case 10: // 128K/256K
for (int i = 0; i < (((prgsize - 3) * 8) + 7); i++) {
write_prg_byte(0xA000, i); // $8000-$BFFF
for (word address = 0x0; address < 0x4000; address += 512) { // Switch Bank ($8000-$BFFF)
dumpPRG(base, address);
}
}
for (word address = 0x4000; address < 0x8000; address += 512) { // Final Bank ($C000-$FFFF)
dumpPRG(base, address);
}
break;
case 16:
case 159: // 128K/256K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) {
write_prg_byte(0x6008, i); // Submapper 4
write_prg_byte(0x8008, i); // Submapper 5
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 18: // 128K/256K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i += 2) {
write_prg_byte(0x8000, i & 0xF);
write_prg_byte(0x8001, (i >> 4) & 0xF);
write_prg_byte(0x8002, (i + 1) & 0xF);
write_prg_byte(0x8003, ((i + 1) >> 4) & 0xF);
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
break;
case 19: // 128K/256K
for (int j = 0; j < 64; j++) { // Init Register
write_ram_byte(0xE000, 0); // PRG Bank 0 ($8000-$9FFF)
}
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i++) {
write_ram_byte(0xE000, i); // PRG Bank 0 ($8000-$9FFF)
for (word address = 0x0; address < 0x2000; address += 512) {
dumpPRG(base, address);
}
}
break;
case 21: // 256K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i++) {
write_prg_byte(0xA000, i);
for (word address = 0x2000; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
break;
case 22:
case 23:
case 25:
case 65:
case 75: // 128K/256K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i += 2) {
write_prg_byte(0x8000, i);
write_prg_byte(0xA000, i + 1);
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
break;
case 24:
case 26: // 256K
case 78: // 128K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 128K
write_prg_byte(0x8000, i);
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 30: // 256K/512K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 256K/512K
if (flashfound)
write_prg_byte(0xC000, i); // Flashable
else
write_prg_byte(0x8000, i); // Non-Flashable
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 32: // 128K/256K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i++) { // 128K/256K
write_prg_byte(0x9000, 1); // PRG Mode 0 - Read $A000-$BFFF to avoid difference between Modes 0 and 1
write_prg_byte(0xA000, i); // PRG Bank
for (word address = 0x2000; address < 0x4000; address += 512) { // 8K Banks ($A000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 33:
case 48: // 128K/256K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i += 2) {
write_prg_byte(0x8000, i); // PRG Bank 0 ($8000-$9FFF)
write_prg_byte(0x8001, i + 1); // PRG Bank 1 ($A000-$BFFF)
for (word address = 0x0; address < 0x4000; address += 512) { // 8K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 37:
banks = ((int_pow(2, prgsize) * 2)) - 2; // Set Number of Banks
write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable
for (int i = 0; i < banks; i += 2) { // 256K
if (i == 0)
write_prg_byte(0x6000, 0); // Switch to Lower Block ($0000-$FFFF)
else if (i == 8)
write_prg_byte(0x6000, 3); // Switch to 2nd 64K Block ($10000-$1FFFF)
else if (i == 16)
write_prg_byte(0x6000, 4); // Switch to 128K Block ($20000-$3FFFF)
write_prg_byte(0x8000, 6); // PRG Bank 0 ($8000-$9FFF)
write_prg_byte(0x8001, i);
write_prg_byte(0x8000, 7); // PRG Bank 1 ($A000-$BFFF)
write_prg_byte(0x8001, i + 1);
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
for (word address = 0x4000; address < 0x8000; address += 512) { // Final 2 Banks ($C000-$FFFF)
dumpPRG(base, address);
}
break;
case 66: // 64K/128K
banks = int_pow(2, prgsize) / 2;
for (int i = 0; i < banks; i++) { // 64K/128K
write_prg_byte(0x8000, i << 4); // bits 4-5
for (word address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF)
dumpPRG(base, address);
}
}
break;
case 67: // 128K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 128K
write_reg_byte(0xF800, i); // [WRITE RAM SAFE]
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 68:
case 73: // 128K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 128K
write_reg_byte(0xF000, i); // [WRITE RAM SAFE]
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 69: // 128K/256K
banks = int_pow(2, prgsize) * 2;
write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0
write_prg_byte(0xA000, 0); // Parameter Register - PRG RAM Disabled, PRG ROM, Bank 0 to $6000-$7FFF
for (int i = 0; i < banks; i++) { // 128K/256K
write_prg_byte(0x8000, 9); // Command Register - PRG Bank 1
write_prg_byte(0xA000, i); // Parameter Register - ($8000-$9FFF)
for (word address = 0x0000; address < 0x2000; address += 512) { // 8K Banks ($8000-$9FFF)
dumpPRG(base, address);
}
}
break;
case 70:
case 89:
case 93: // 128K
case 152: // 64K/128K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 128K
write_prg_byte(0x8000, i << 4);
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 71: // 64K/128K/256K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) {
write_prg_byte(0xC000, i);
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 72: // 128K
banks = int_pow(2, prgsize);
write_prg_byte(0x8000, 0); // Reset Register
for (int i = 0; i < banks; i++) { // 128K
write_prg_byte(0x8000, i | 0x80); // PRG Command + Bank
write_prg_byte(0x8000, i); // PRG Bank
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 76:
case 88:
case 95:
case 154: // 128K
case 206: // 32K/64K/128K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i += 2) {
write_prg_byte(0x8000, 6); // PRG ROM Command ($8000-$9FFF)
write_prg_byte(0x8001, i); // PRG Bank
write_prg_byte(0x8000, 7); // PRG ROM Command ($A000-$BFFF)
write_prg_byte(0x8001, i + 1); // PRG Bank
for (word address = 0x0; address < 0x4000; address += 512) { // 8K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 80: // 128K
case 207: // 256K [CART SOMETIMES NEEDS POWERCYCLE]
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i += 2) {
write_prg_byte(0x7EFA, i); // PRG Bank 0 ($8000-$9FFF)
write_prg_byte(0x7EFC, i + 1); // PRG Bank 1 ($A000-$BFFF)
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
break;
case 82: // 128K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i += 2) {
write_prg_byte(0x7EFA, i << 2); // PRG Bank 0 ($8000-$9FFF)
write_prg_byte(0x7EFB, (i + 1) << 2); // PRG Bank 1 ($A000-$BFFF)
for (word address = 0x0; address < 0x4000; address += 512) { // 8K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 85: // 128K/512K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i++) {
write_prg_byte(0x8000, i); // PRG Bank 0 ($8000-$9FFF)
for (word address = 0x0; address < 0x2000; address += 512) { // 8K Banks ($8000-$9FFF)
dumpPRG(base, address);
}
}
break;
case 86:
case 140: // 128K
banks = int_pow(2, prgsize) / 2;
for (int i = 0; i < banks; i++) { // 128K
write_prg_byte(0x6000, i << 4); // bits 4-5
for (word address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF)
dumpPRG(base, address);
}
}
break;
case 92: // 256K
banks = int_pow(2, prgsize);
write_prg_byte(0x8000, 0); // Reset Register
for (int i = 0; i < banks; i++) { // 256K
write_prg_byte(0x8000, i | 0x80); // PRG Command + Bank
write_prg_byte(0x8000, i); // PRG Bank
for (word address = 0x4000; address < 0x8000; address += 512) { // 16K Banks ($C000-$FFFF)
dumpPRG(base, address);
}
}
break;
case 94:
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 128K
write_prg_byte(0x8000, i << 2);
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
break;
case 97: // 256K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 256K
write_prg_byte(0x8000, i); // PRG Bank
for (word address = 0x4000; address < 0x8000; address += 512) { // 16K Banks ($C000-$FFFF)
dumpPRG(base, address);
}
}
break;
case 105: // 256K
write_mmc1_byte(0xA000, 0x00); // Clear PRG Init/IRQ (Bit 4)
write_mmc1_byte(0xA000, 0x10); // Set PRG Init/IRQ (Bit 4) to enable bank swapping
for (int i = 0; i < 4; i++) { // PRG CHIP 1 128K
write_mmc1_byte(0xA000, i << 1);
for (word address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF)
dumpPRG(base, address);
}
}
write_mmc1_byte(0x8000, 0x0C); // Switch 16K Bank ($8000-$BFFF) + Fixed Last Bank ($C000-$FFFF)
write_mmc1_byte(0xA000, 0x08); // Select PRG CHIP 2 (Bit 3)
for (int j = 0; j < 8; j++) { // PRG CHIP 2 128K
write_mmc1_byte(0xE000, j);
for (word address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 180: // 128K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) {
write_prg_byte(0x8000, i);
for (word address = 0x4000; address < 0x8000; address += 512) { // 16K Banks ($C000-$FFFF)
dumpPRG(base, address);
}
}
break;
case 153: // 512K
banks = int_pow(2, prgsize);
for (int i = 0; i < banks; i++) { // 512K
write_prg_byte(0x8000, i >> 4); // PRG Outer Bank (Documentation says duplicate over $8000-$8003 registers)
write_prg_byte(0x8001, i >> 4); // PRG Outer Bank
write_prg_byte(0x8002, i >> 4); // PRG Outer Bank
write_prg_byte(0x8003, i >> 4); // PRG Outer Bank
write_prg_byte(0x8008, i & 0xF); // PRG Inner Bank
for (word address = 0x0000; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF)
dumpPRG(base, address);
}
}
break;
case 210: // 128K/256K
banks = int_pow(2, prgsize) * 2;
for (int i = 0; i < banks; i += 2) {
write_prg_byte(0xE000, i); // PRG Bank 0 ($8000-$9FFF) [WRITE NO RAM]
write_prg_byte(0xE800, i + 1); // PRG Bank 1 ($A000-$BFFF) [WRITE NO RAM]
for (word address = 0x0; address < 0x4000; address += 512) {
dumpPRG(base, address);
}
}
break;
}
sdFile.flush();
sdFile.close();
println_Msg(F("PRG FILE DUMPED!"));
println_Msg(F(""));
display_Update();
calcCRC(fileName, prg * 1024, &prg_crc32, 0);
}
set_address(0);
PHI2_HI;
ROMSEL_HI;
LED_BLUE_OFF;
}
void readCHR() {
display_Clear();
display_Update();
LED_GREEN_ON;
set_address(0);
_delay_us(1);
if (chrsize == 0) {
println_Msg(F("CHR SIZE 0K"));
display_Update();
}
else {
CreateCHRFileInSD();
if (sdFile) {
switch (mapper) {
case 0: // 8K
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
break;
case 1:
case 155:
banks = int_pow(2, chrsize);
for (int i = 0; i < banks; i += 2) { // 8K/16K/32K/64K/128K (Bank #s are based on 4K Banks)
write_prg_byte(0x8000, 0x80); // Clear Register
write_mmc1_byte(0xA000, i);
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 3: // 8K/16K/32K
case 66: // 16K/32K
case 70:
case 152: // 128K
banks = int_pow(2, chrsize) / 2;
for (int i = 0; i < banks; i++) { // 8K Banks
write_prg_byte(0x8000, i); // CHR Bank 0
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 4:
case 47:
case 118:
case 119:
banks = int_pow(2, chrsize) * 4;
if (mapper == 47)
write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable
for (int i = 0; i < banks; i += 4) { // 8K/16K/32K/64K/128K/256K
if (mapper == 47) {
if (i == 0)
write_prg_byte(0x6000, 0); // Switch to Lower Block
else if (i == 128)
write_prg_byte(0x6000, 1); // Switch to Upper Block
}
write_prg_byte(0x8000, 0); // CHR Bank 0 ($0000-$07FF)
write_prg_byte(0x8001, i);
write_prg_byte(0x8000, 1); // CHR Bank 1 ($0800-$0FFF)
write_prg_byte(0x8001, i + 2);
for (word address = 0x0; address < 0x1000; address += 512) {
dumpCHR(address);
}
}
break;
case 5: // 128K/256K/512K
banks = int_pow(2, chrsize) / 2;
write_prg_byte(0x5101, 0); // 8K CHR Banks
for (int i = 0; i < banks; i++) {
if (i == 0)
write_prg_byte(0x5130, 0); // Set Upper 2 bits
else if (i == 8)
write_prg_byte(0x5130, 1); // Set Upper 2 bits
else if (i == 16)
write_prg_byte(0x5130, 2); // Set Upper 2 bits
else if (i == 24)
write_prg_byte(0x5130, 3); // Set Upper 2 bits
write_prg_byte(0x5127, i);
for (word address = 0x0; address < 0x2000; address += 512) { // ($0000-$1FFF)
dumpCHR(address);
}
}
break;
case 9:
case 10: // Mapper 9: 128K, Mapper 10: 64K/128K
if (mapper == 9)
banks = 32;
else // Mapper 10
banks = int_pow(2, chrsize);
for (int i = 0; i < banks; i++) { // 64K/128K
write_prg_byte(0xB000, i);
write_prg_byte(0xC000, i);
for (word address = 0x0; address < 0x1000; address += 512) {
dumpCHR(address);
}
}
break;
case 16:
case 159: // 128K/256K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i++) {
write_prg_byte(0x6000, i); // Submapper 4
write_prg_byte(0x8000, i); // Submapper 5
for (word address = 0x0; address < 0x400; address += 512) {
dumpCHR(address);
}
}
break;
case 18: // 128K/256K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i++) {
write_prg_byte(0xA000, i & 0xF); // CHR Bank Lower 4 bits
write_prg_byte(0xA001, (i >> 4) & 0xF); // CHR Bank Upper 4 bits
for (word address = 0x0; address < 0x400; address += 512) {
dumpCHR(address);
}
}
break;
case 19: // 128K/256K
for (int j = 0; j < 64; j++) { // Init Register
write_ram_byte(0xE800, 0xC0); // CHR RAM High/Low Disable (ROM Enable)
}
banks = int_pow(2, chrsize) * 4;
write_ram_byte(0xE800, 0xC0); // CHR RAM High/Low Disable (ROM Enable)
for (int i = 0; i < banks; i += 8) {
write_prg_byte(0x8000, i); // CHR Bank 0
write_prg_byte(0x8800, i + 1); // CHR Bank 1
write_prg_byte(0x9000, i + 2); // CHR Bank 2
write_prg_byte(0x9800, i + 3); // CHR Bank 3
write_prg_byte(0xA000, i + 4); // CHR Bank 4
write_prg_byte(0xA800, i + 5); // CHR Bank 5
write_prg_byte(0xB000, i + 6); // CHR Bank 6
write_prg_byte(0xB800, i + 7); // CHR Bank 7
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 21: // 128K/256K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i++) {
write_prg_byte(0xB000, i & 0xF); // CHR Bank Lower 4 bits
if (chrsize == 5) // Check CHR Size to determine VRC4a (128K) or VRC4c (256K)
write_prg_byte(0xB002, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC4a (Wai Wai World 2)
else // banks == 256
write_prg_byte(0xB040, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC4c (Ganbare Goemon Gaiden 2)
for (word address = 0x0; address < 0x400; address += 512) {
dumpCHR(address);
}
}
break;
case 22: // 128K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i++) {
write_prg_byte(0xB000, (i << 1) & 0xF); // CHR Bank Lower 4 bits
write_prg_byte(0xB002, (i >> 3) & 0xF); // CHR Bank Upper 4 bits
for (word address = 0x0; address < 0x400; address += 512) {
dumpCHR(address);
}
}
break;
case 23: // 128K
// Detect VRC4e Carts - read PRG 0x1FFF6 (DATE)
// Boku Dracula-kun = 890810, Tiny Toon = 910809
// Crisis Force = 910701, Parodius Da! = 900916
write_prg_byte(0x8000, 15);
prgchk0 = read_prg_byte(0x9FF6);
if (prgchk0 == 0x30) { // Check for "0" in middle of date
vrc4e = true; // VRC4e Cart
}
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i++) {
write_prg_byte(0xB000, i & 0xF); // CHR Bank Lower 4 bits
if (vrc4e == true)
write_prg_byte(0xB004, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC4e
else
write_prg_byte(0xB001, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC2b/VRC4f
for (word address = 0x0; address < 0x400; address += 512) {
dumpCHR(address);
}
}
break;
case 24: // 128K
banks = int_pow(2, chrsize) * 4;
write_prg_byte(0xB003, 0); // PPU Banking Mode 0
for (int i = 0; i < banks; i += 8) {
write_prg_byte(0xD000, i); // CHR Bank 0
write_prg_byte(0xD001, i + 1); // CHR Bank 1
write_prg_byte(0xD002, i + 2); // CHR Bank 2
write_prg_byte(0xD003, i + 3); // CHR Bank 3
write_prg_byte(0xE000, i + 4); // CHR Bank 4 [WRITE NO RAM]
write_prg_byte(0xE001, i + 5); // CHR Bank 5 [WRITE NO RAM]
write_prg_byte(0xE002, i + 6); // CHR Bank 6 [WRITE NO RAM]
write_prg_byte(0xE003, i + 7); // CHR Bank 7 [WRITE NO RAM]
for (word address = 0x0; address < 0x2000; address += 512) { // 1K Banks
dumpCHR(address);
}
}
break;
case 25: // 128K/256K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i++) {
write_prg_byte(0xB000, i & 0xF); // CHR Bank Lower 4 bits
if ((ramsize > 0) || (banks == 128)) // VRC2c (Ganbare Goemon Gaiden)/VRC4b (Bio Miracle/Gradius 2/Racer Mini)
write_prg_byte(0xB002, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC2c/VRC4b
else
write_prg_byte(0xB008, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC4d (Teenage Mutant Ninja Turtles)
for (word address = 0x0; address < 0x400; address += 512) {
dumpCHR(address);
}
}
break;
case 26: // 128K/256K
banks = int_pow(2, chrsize) * 4;
2020-07-03 19:01:35 +02:00
write_prg_byte(0xB003, 0x00);
for (int i = 0; i < banks; i += 4) {
write_prg_byte(0xD000, i + 0); // CHR Bank 0
write_prg_byte(0xD002, i + 1); // CHR Bank 1
write_prg_byte(0xD001, i + 2); // CHR Bank 2
write_prg_byte(0xD003, i + 3); // CHR Bank 3
2020-07-03 19:01:35 +02:00
for (word address = 0x0; address < 0x1000; address += 512) { // 1K Banks
dumpCHR(address);
}
}
break;
case 32: // 128K
case 65: // 128K/256K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i += 8) {
write_prg_byte(0xB000, i); // CHR Bank 0
write_prg_byte(0xB001, i + 1); // CHR Bank 1
write_prg_byte(0xB002, i + 2); // CHR Bank 2
write_prg_byte(0xB003, i + 3); // CHR Bank 3
write_prg_byte(0xB004, i + 4); // CHR Bank 4
write_prg_byte(0xB005, i + 5); // CHR Bank 5
write_prg_byte(0xB006, i + 6); // CHR Bank 6
write_prg_byte(0xB007, i + 7); // CHR Bank 7
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 33: // 128K/256K
case 48: // 256K
banks = int_pow(2, chrsize) * 2;
for (int i = 0; i < banks; i += 2) { // 2K Banks
write_prg_byte(0x8002, i); // CHR Bank 0
write_prg_byte(0x8003, i + 1); // CHR Bank 1
for (word address = 0x0; address < 0x1000; address += 512) {
dumpCHR(address);
}
}
break;
case 37:
banks = int_pow(2, chrsize) * 4;
write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable
for (int i = 0; i < banks; i += 4) { // 256K
if (i == 0)
write_prg_byte(0x6000, 0); // Switch to Lower Block ($00000-$1FFFF)
else if (i == 128)
write_prg_byte(0x6000, 4); // Switch to Upper Block ($20000-$3FFFF)
write_prg_byte(0x8000, 0); // CHR Bank 0 ($0000-$07FF)
write_prg_byte(0x8001, i);
write_prg_byte(0x8000, 1); // CHR Bank 1 ($0800-$0FFF)
write_prg_byte(0x8001, i + 2);
for (word address = 0x0; address < 0x1000; address += 512) {
dumpCHR(address);
}
}
break;
case 67: // 128K
banks = int_pow(2, chrsize) * 2;
for (int i = 0; i < banks; i += 4) { // 2K Banks
write_prg_byte(0x8800, i); // CHR Bank 0
write_prg_byte(0x9800, i + 1); // CHR Bank 1
write_prg_byte(0xA800, i + 2); // CHR Bank 2
write_prg_byte(0xB800, i + 3); // CHR Bank 3
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 68: // 128K/256K
banks = int_pow(2, chrsize) * 2;
for (int i = 0; i < banks; i += 4) { // 2K Banks
write_prg_byte(0x8000, i); // CHR Bank 0
write_prg_byte(0x9000, i + 1); // CHR Bank 1
write_prg_byte(0xA000, i + 2); // CHR Bank 2
write_prg_byte(0xB000, i + 3); // CHR Bank 3
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 69: // 128K/256K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i++) {
write_prg_byte(0x8000, 0); // Command Register - CHR Bank 0
write_prg_byte(0xA000, i); // Parameter Register - ($0000-$03FF)
for (word address = 0x0; address < 0x400; address += 512) { // 1K Banks
dumpCHR(address);
}
}
break;
case 72: // 128K
banks = int_pow(2, chrsize) / 2;
write_prg_byte(0x8000, 0); // Reset Register
for (int i = 0; i < banks; i++) { // 8K Banks
write_prg_byte(0x8000, i | 0x40); // CHR Command + Bank
write_prg_byte(0x8000, i); // CHR Bank
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 75: // 128K
banks = int_pow(2, chrsize);
for (int i = 0; i < banks; i++) { // 4K Banks
write_reg_byte(0xE000, i); // CHR Bank Low Bits [WRITE RAM SAFE]
write_prg_byte(0x9000, (i & 0x10) >> 3); // High Bit
for (word address = 0x0; address < 0x1000; address += 512) {
dumpCHR(address);
}
}
break;
case 76: // 128K
banks = int_pow(2, chrsize) * 2;
for (int i = 0; i < banks; i += 2) { // 2K Banks
write_prg_byte(0x8000, 2); // CHR Command ($0000-$07FF) 2K Bank
write_prg_byte(0x8001, i); // CHR Bank
write_prg_byte(0x8000, 3); // CHR Command ($0800-$0FFF) 2K Bank
write_prg_byte(0x8001, i + 1); // CHR Bank
for (word address = 0x0000; address < 0x1000; address += 512) {
dumpCHR(address);
}
}
break;
case 77: // 32K
banks = int_pow(2, chrsize) * 2;
for (int i = 0; i < banks; i++) { // 2K Banks
write_prg_byte(0x8000, i << 4); // CHR Bank 0
for (word address = 0x0; address < 0x800; address += 512) {
dumpCHR(address);
}
}
break;
case 78: // 128K
banks = int_pow(2, chrsize) / 2;
for (int i = 0; i < banks; i++) { // 8K Banks
write_prg_byte(0x8000, i << 4); // CHR Bank 0
for (word address = 0x0; address < 0x2000; address += 512) { // 8K Banks ($0000-$1FFF)
dumpCHR(address);
}
}
break;
case 80: // 128K/256K
case 82: // 128K/256K
case 207: // 128K [CART SOMETIMES NEEDS POWERCYCLE]
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i += 4) {
write_prg_byte(0x7EF2, i); // CHR Bank 2 [REGISTERS 0x7EF0/0x7EF1 WON'T WORK]
write_prg_byte(0x7EF3, i + 1); // CHR Bank 3
write_prg_byte(0x7EF4, i + 2); // CHR Bank 4
write_prg_byte(0x7EF5, i + 3); // CHR Bank 5
for (word address = 0x1000; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 85: // 128K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i += 8) {
write_prg_byte(0xA000, i); // CHR Bank 0
write_prg_byte(0xA008, i + 1); // CHR Bank 1
write_prg_byte(0xB000, i + 2); // CHR Bank 2
write_prg_byte(0xB008, i + 3); // CHR Bank 3
write_prg_byte(0xC000, i + 4); // CHR Bank 4
write_prg_byte(0xC008, i + 5); // CHR Bank 5
write_prg_byte(0xD000, i + 6); // CHR Bank 6
write_prg_byte(0xD008, i + 7); // CHR Bank 7
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 86: // 64K
banks = int_pow(2, chrsize) / 2;
for (int i = 0; i < banks; i++) { // 8K Banks
if (i < 4)
write_prg_byte(0x6000, i & 0x3);
else
write_prg_byte(0x6000, (i | 0x40) & 0x43);
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 87: // 16K/32K
banks = int_pow(2, chrsize) / 2;
for (int i = 0; i < banks; i++) { // 16K/32K
write_prg_byte(0x6000, (((i & 0x1) << 1) | ((i & 0x2) >> 1)));
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 88: // 128K
case 95: // 32K
case 154: // 128K
case 206: // 16K/32K/64K
banks = int_pow(2, chrsize) * 4;
for (int i = 0; i < banks; i += 2) { // 1K Banks
if (i < 64) {
write_prg_byte(0x8000, 0); // CHR Command ($0000-$07FF) 2K Bank
write_prg_byte(0x8001, i & 0x3F); // CHR Bank
for (word address = 0x0; address < 0x800; address += 512) {
dumpCHR(address);
}
}
else {
write_prg_byte(0x8000, 2); // CHR Command ($1000-$13FF) 1K Bank
write_prg_byte(0x8001, i); // CHR Bank
write_prg_byte(0x8000, 3); // CHR Command ($1400-$17FF) 1K Bank
write_prg_byte(0x8001, i + 1); // CHR Bank
for (word address = 0x1000; address < 0x1800; address += 512) {
dumpCHR(address);
}
}
}
break;
case 89: // 128K
banks = int_pow(2, chrsize) / 2;
for (int i = 0; i < banks; i++) { // 8K Banks
if (i < 8)
write_prg_byte(0x8000, i & 0x7);
else
write_prg_byte(0x8000, (i | 0x80) & 0x87);
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 92: // 128K
banks = int_pow(2, chrsize) / 2;
write_prg_byte(0x8000, 0); // Reset Register
for (int i = 0; i < banks; i++) { // 8K Banks
write_prg_byte(0x8000, i | 0x40); // CHR Command + Bank
write_prg_byte(0x8000, i); // CHR Bank
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 140: // 32K/128K
banks = int_pow(2, chrsize) / 2;
for (int i = 0; i < banks; i++) { // 8K Banks
write_prg_byte(0x6000, i);
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
case 184: // 16K/32K
banks = int_pow(2, chrsize);
for (int i = 0; i < banks; i++) { // 4K Banks
write_prg_byte(0x6000, i); // CHR LOW (Bits 0-2) ($0000-$0FFF)
for (word address = 0x0; address < 0x1000; address += 512) { // 4K Banks ($0000-$0FFF)
dumpCHR(address);
}
}
break;
case 185: // 8K [READ 32K TO OVERRIDE LOCKOUT]
for (int i = 0; i < 4; i++) { // Read 32K to locate valid 8K
write_prg_byte(0x8000, i);
byte chrcheck = read_chr_byte(0);
for (word address = 0x0; address < 0x2000; address += 512) {
for (int x = 0; x < 512; x++) {
sdBuffer[x] = read_chr_byte(address + x);
}
if (chrcheck != 0xFF)
sdFile.write(sdBuffer, 512);
}
}
break;
case 210: // 128K/256K
banks = int_pow(2, chrsize) * 4;
write_prg_byte(0xE800, 0xC0); // CHR RAM DISABLE (Bit 6 and 7) [WRITE NO RAM]
for (int i = 0; i < banks; i += 8) {
write_prg_byte(0x8000, i); // CHR Bank 0
write_prg_byte(0x8800, i + 1); // CHR Bank 1
write_prg_byte(0x9000, i + 2); // CHR Bank 2
write_prg_byte(0x9800, i + 3); // CHR Bank 3
write_prg_byte(0xA000, i + 4); // CHR Bank 4
write_prg_byte(0xA800, i + 5); // CHR Bank 5
write_prg_byte(0xB000, i + 6); // CHR Bank 6
write_prg_byte(0xB800, i + 7); // CHR Bank 7
for (word address = 0x0; address < 0x2000; address += 512) {
dumpCHR(address);
}
}
break;
}
sdFile.flush();
sdFile.close();
println_Msg(F("CHR FILE DUMPED!"));
println_Msg(F(""));
display_Update();
calcCRC(fileName, chr * 1024, &chr_crc32, 0);
}
}
set_address(0);
PHI2_HI;
ROMSEL_HI;
LED_GREEN_OFF;
}
/******************************************
RAM Functions
*****************************************/
void readRAM() {
display_Clear();
display_Update();
LED_BLUE_ON;
LED_GREEN_ON;
set_address(0);
_delay_us(1);
if (ramsize == 0) {
println_Msg(F("RAM SIZE 0K"));
display_Update();
}
else {
CreateRAMFileInSD();
word base = 0x6000;
if (sdFile) {
switch (mapper) {
case 0: // 2K/4K
for (word address = 0x0; address < (0x800 * ramsize); address += 512) { // 2K/4K
dumpPRG(base, address); // SWITCH MUST BE IN OFF POSITION
}
break;
case 1:
case 155: // 8K/16K/32K
banks = int_pow(2, ramsize) / 2; // banks = 1,2,4
for (int i = 0; i < banks; i++) { // 8K Banks ($6000-$7FFF)
write_prg_byte(0x8000, 0x80); // Clear Register
write_mmc1_byte(0x8000, 1 << 3);
write_mmc1_byte(0xE000, 0);
if (banks == 4) // 32K
write_mmc1_byte(0xA000, i << 2);
else
write_mmc1_byte(0xA000, i << 3);
for (word address = 0x0; address < 0x2000; address += 512) { // 8K
dumpPRG(base, address);
}
}
break;
case 4: // 1K/8K (MMC6/MMC3)
if (mmc6) { // MMC6 1K
write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE
write_prg_byte(0xA001, 0x20); // PRG RAM PROTECT - Enable reading RAM at $7000-$71FF
for (word address = 0x1000; address < 0x1200; address += 512) { // 512B
dumpMMC5RAM(base, address);
}
write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE
write_prg_byte(0xA001, 0x80); // PRG RAM PROTECT - Enable reading RAM at $7200-$73FF
for (word address = 0x1200; address < 0x1400; address += 512) { // 512B
dumpMMC5RAM(base, address);
}
write_prg_byte(0x8000, 6); // PRG RAM DISABLE
}
else { // MMC3 8K
write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect
for (word address = 0; address < 0x2000; address += 512) { // 8K
dumpPRG(base, address);
}
}
break;
case 5: // 8K/16K/32K
write_prg_byte(0x5100, 3); // 8K PRG Banks
banks = int_pow(2, ramsize) / 2; // banks = 1,2,4
if (banks == 2) { // 16K - Split SRAM Chips 8K/8K
for (int i = 0; i < (banks / 2); i++) { // Chip 1
write_prg_byte(0x5113, i);
for (word address = 0; address < 0x2000; address += 512) { // 8K
dumpMMC5RAM(base, address);
}
}
for (int j = 4; j < (banks / 2) + 4; j++) { // Chip 2
write_prg_byte(0x5113, j);
for (word address = 0; address < 0x2000; address += 512) { // 8K
dumpMMC5RAM(base, address);
}
}
}
else { // 8K/32K Single SRAM Chip
for (int i = 0; i < banks; i++) { // banks = 1 or 4
write_prg_byte(0x5113, i);
for (word address = 0; address < 0x2000; address += 512) { // 8K
dumpMMC5RAM(base, address);
}
}
}
break;
case 16: // 256-byte EEPROM 24C02
case 159: // 128-byte EEPROM 24C01 [Little Endian]
if (mapper == 159)
eepsize = 128;
else
eepsize = 256;
for (word address = 0; address < eepsize; address++) {
EepromREAD(address);
}
sdFile.write(sdBuffer, eepsize);
// display_Clear(); // TEST PURPOSES - DISPLAY EEPROM DATA
break;
case 19:
if (ramsize == 2) { // PRG RAM 128B
for (int x = 0; x < 128; x++) {
write_ram_byte(0xF800, x); // PRG RAM ENABLE
sdBuffer[x] = read_prg_byte(0x4800); // DATA PORT
}
sdFile.write(sdBuffer, 128);
}
else { // SRAM 8K
for (int i = 0; i < 64; i++) { // Init Register
write_ram_byte(0xE000, 0);
}
for (word address = 0; address < 0x2000; address += 512) { // 8K
dumpPRG(base, address);
}
}
break;
case 80: // 1K
write_prg_byte(0x7EF8, 0xA3); // PRG RAM ENABLE 0
write_prg_byte(0x7EF9, 0xA3); // PRG RAM ENABLE 1
for (int x = 0; x < 128; x++) { // PRG RAM 1K ($7F00-$7FFF) MIRRORED ONCE
sdBuffer[x] = read_prg_byte(0x7F00 + x);
}
sdFile.write(sdBuffer, 128);
write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 0
write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 1
break;
case 82: // 5K
write_prg_byte(0x7EF7, 0xCA); // PRG RAM ENABLE 0 ($6000-$67FF)
write_prg_byte(0x7EF8, 0x69); // PRG RAM ENABLE 1 ($6800-$6FFF)
write_prg_byte(0x7EF9, 0x84); // PRG RAM ENABLE 2 ($7000-$73FF)
for (word address = 0x0; address < 0x1400; address += 512) { // PRG RAM 5K ($6000-$73FF)
dumpMMC5RAM(base, address);
}
write_prg_byte(0x7EF7, 0xFF); // PRG RAM DISABLE 0 ($6000-$67FF)
write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 1 ($6800-$6FFF)
write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 2 ($7000-$73FF)
break;
default:
if (mapper == 118) // 8K
write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect
else if (mapper == 19) {
for (int i = 0; i < 64; i++) { // Init Register
write_ram_byte(0xE000, 0);
}
}
else if ((mapper == 21) || (mapper == 25)) // 8K
write_prg_byte(0x8000, 0);
else if (mapper == 26) // 8K
write_prg_byte(0xB003, 0x80); // PRG RAM ENABLE
else if (mapper == 68) // 8K
write_reg_byte(0xF000, 0x10); // PRG RAM ENABLE [WRITE RAM SAFE]
else if (mapper == 69) { // 8K
write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0
write_prg_byte(0xA000, 0xC0); // Parameter Register - PRG RAM Enabled, PRG RAM, Bank 0 to $6000-$7FFF
}
else if (mapper == 85) // 8K
write_ram_byte(0xE000, 0x80); // PRG RAM ENABLE
else if (mapper == 153) // 8K
write_prg_byte(0x800D, 0x20); // PRG RAM Chip Enable
for (word address = 0; address < 0x2000; address += 512) { // 8K
dumpPRG(base, address);
}
if (mapper == 85) // 8K
write_reg_byte(0xE000, 0); // PRG RAM DISABLE [WRITE RAM SAFE]
break;
}
sdFile.flush();
sdFile.close();
println_Msg(F("RAM FILE DUMPED!"));
println_Msg(F(""));
display_Update();
if ((mapper == 16) || (mapper == 159))
calcCRC(fileName, eepsize, NULL, 0);
else
calcCRC(fileName, ram * 1024, NULL, 0);
}
}
set_address(0);
PHI2_HI;
ROMSEL_HI;
LED_BLUE_OFF;
LED_GREEN_OFF;
}
void writeRAM() {
display_Clear();
if (ramsize == 0) {
2019-09-05 22:18:18 +02:00
print_Error(F("RAM SIZE 0K"), false);
}
else {
fileBrowser(F("Select RAM File"));
word base = 0x6000;
sd.chdir();
sprintf(filePath, "%s/%s", filePath, fileName);
2019-09-05 22:18:18 +02:00
display_Clear();
println_Msg(F("Writing File: "));
println_Msg(filePath);
println_Msg(fileName);
display_Update();
//open file on sd card
if (sdFile.open(filePath, O_READ)) {
switch (mapper) {
case 0: // 2K/4K
for (word address = 0x0; address < (0x800 * ramsize); address += 512) { // 2K/4K
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
write_prg_byte(base + address + x, sdBuffer[x]); // SWITCH MUST BE IN OFF POSITION
}
}
break;
case 1:
case 155:
banks = int_pow(2, ramsize) / 2; // banks = 1,2,4
for (int i = 0; i < banks; i++) { // 8K Banks ($6000-$7FFF)
write_prg_byte(0x8000, 0x80); // Clear Register
write_mmc1_byte(0x8000, 1 << 3); // PRG ROM MODE 32K
write_mmc1_byte(0xE000, 0); // PRG RAM ENABLED
if (banks == 4) // 32K
write_mmc1_byte(0xA000, i << 2);
else
write_mmc1_byte(0xA000, i << 3);
for (word address = 0x0; address < 0x2000; address += 512) { // 8K
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
write_prg_byte(base + address + x, sdBuffer[x]);
}
}
}
break;
case 4: // 1K/8K (MMC6/MMC3)
if (mmc6) { // MMC6 1K
write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE
write_prg_byte(0xA001, 0x30); // PRG RAM PROTECT - Enable reading/writing to RAM at $7000-$71FF
for (word address = 0x1000; address < 0x1200; address += 512) { // 512B
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
write_wram_byte(base + address + x, sdBuffer[x]);
}
}
write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE
write_prg_byte(0xA001, 0xC0); // PRG RAM PROTECT - Enable reading/writing to RAM at $7200-$73FF
for (word address = 0x1200; address < 0x1400; address += 512) { // 512B
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
write_wram_byte(base + address + x, sdBuffer[x]);
}
}
write_prg_byte(0x8000, 0x6); // PRG RAM DISABLE
}
else { // MMC3 8K
write_prg_byte(0xA001, 0x80); // PRG RAM CHIP ENABLE - Chip Enable, Allow Writes
for (word address = 0; address < 0x2000; address += 512) { // 8K
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
write_prg_byte(base + address + x, sdBuffer[x]);
}
}
write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect
}
break;
case 5: // 8K/16K/32K
write_prg_byte(0x5100, 3); // 8K PRG Banks
banks = int_pow(2, ramsize) / 2; // banks = 1,2,4
if (banks == 2) { // 16K - Split SRAM Chips 8K/8K [ETROM = 16K (ONLY 1ST 8K BATTERY BACKED)]
for (int i = 0; i < (banks / 2); i++) { // Chip 1
write_prg_byte(0x5113, i);
for (word address = 0; address < 0x2000; address += 512) { // 8K
writeMMC5RAM(base, address);
}
}
for (int j = 4; j < (banks / 2) + 4; j++) { // Chip 2
write_prg_byte(0x5113, j);
for (word address = 0; address < 0x2000; address += 512) { // 8K
writeMMC5RAM(base, address);
}
}
}
else { // 8K/32K Single SRAM Chip [EKROM = 8K BATTERY BACKED, EWROM = 32K BATTERY BACKED]
for (int i = 0; i < banks; i++) { // banks = 1 or 4
write_prg_byte(0x5113, i);
for (word address = 0; address < 0x2000; address += 512) { // 8K
writeMMC5RAM(base, address);
}
}
}
break;
case 16: // 256-byte EEPROM 24C02
case 159: // 128-byte EEPROM 24C01 [Little Endian]
if (mapper == 159)
eepsize = 128;
else
eepsize = 256;
sdFile.read(sdBuffer, eepsize);
for (word address = 0; address < eepsize; address++) {
EepromWRITE(address);
if ((address % 128) == 0)
display_Clear();
print_Msg(F("."));
display_Update();
}
break;
case 19:
if (ramsize == 2) { // PRG RAM 128B
sdFile.read(sdBuffer, 128);
for (int x = 0; x < 128; x++) {
write_ram_byte(0xF800, x); // PRG RAM ENABLE
write_prg_byte(0x4800, sdBuffer[x]); // DATA PORT
}
}
else { // SRAM 8K
for (int i = 0; i < 64; i++) { // Init Register
write_ram_byte(0xF800, 0x40); // PRG RAM WRITE ENABLE
}
write_ram_byte(0xF800, 0x40); // PRG RAM WRITE ENABLE
for (word address = 0; address < 0x2000; address += 512) { // 8K
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
write_prg_byte(base + address + x, sdBuffer[x]);
}
}
write_ram_byte(0xF800, 0x0F); // PRG RAM WRITE PROTECT
}
break;
case 80: // 1K
write_prg_byte(0x7EF8, 0xA3); // PRG RAM ENABLE 0
write_prg_byte(0x7EF9, 0xA3); // PRG RAM ENABLE 1
for (word address = 0x1F00; address < 0x2000; address += 512) { // PRG RAM 1K ($7F00-$7FFF)
sdFile.read(sdBuffer, 128);
for (int x = 0; x < 128; x++) {
write_prg_byte(base + address + x, sdBuffer[x]);
}
}
write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 0
write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 1
break;
case 82: // 5K
write_prg_byte(0x7EF7, 0xCA); // PRG RAM ENABLE 0 ($6000-$67FF)
write_prg_byte(0x7EF8, 0x69); // PRG RAM ENABLE 1 ($6800-$6FFF)
write_prg_byte(0x7EF9, 0x84); // PRG RAM ENABLE 2 ($7000-$73FF)
for (word address = 0x0; address < 0x1400; address += 1024) { // PRG RAM 5K ($6000-$73FF)
sdFile.read(sdBuffer, 512);
firstbyte = sdBuffer[0];
for (int x = 0; x < 512; x++)
write_prg_byte(base + address + x, sdBuffer[x]);
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++)
write_prg_byte(base + address + x + 512, sdBuffer[x]);
write_prg_byte(base + address, firstbyte); // REWRITE 1ST BYTE
}
write_prg_byte(0x7EF7, 0xFF); // PRG RAM DISABLE 0 ($6000-$67FF)
write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 1 ($6800-$6FFF)
write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 2 ($7000-$73FF)
break;
default:
if (mapper == 118) // 8K
write_prg_byte(0xA001, 0x80); // PRG RAM CHIP ENABLE - Chip Enable, Allow Writes
else if ((mapper == 21) || (mapper == 25)) // 8K
write_prg_byte(0x8000, 0);
else if (mapper == 26) // 8K
write_prg_byte(0xB003, 0x80); // PRG RAM ENABLE
// else if (mapper == 68) // 8K
// write_reg_byte(0xF000, 0x10); // PRG RAM ENABLE [WRITE RAM SAFE]
else if (mapper == 69) { // 8K
write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0
write_prg_byte(0xA000, 0xC0); // Parameter Register - PRG RAM Enabled, PRG RAM, Bank 0 to $6000-$7FFF
}
else if (mapper == 85) // 8K
write_ram_byte(0xE000, 0x80); // PRG RAM ENABLE
else if (mapper == 153) // 8K
write_prg_byte(0x800D, 0x20); // PRG RAM Chip Enable
for (word address = 0; address < 0x2000; address += 512) { // 8K
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
write_prg_byte(base + address + x, sdBuffer[x]);
}
}
if (mapper == 118) // 8K
write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect
else if (mapper == 26) // 8K
write_prg_byte(0xB003, 0); // PRG RAM DISABLE
// else if (mapper == 68) // 8K
// write_reg_byte(0xF000, 0x00); // PRG RAM DISABLE [WRITE RAM SAFE]
else if (mapper == 69) { // 8K
write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0
write_prg_byte(0xA000, 0); // Parameter Register - PRG RAM Disabled, PRG ROM, Bank 0 to $6000-$7FFF
}
else if (mapper == 85) // 8K
write_reg_byte(0xE000, 0); // PRG RAM DISABLE [WRITE RAM SAFE]
break;
}
sdFile.close();
LED_GREEN_ON;
println_Msg(F(""));
println_Msg(F("RAM FILE WRITTEN!"));
display_Update();
}
else {
2019-09-05 22:18:18 +02:00
print_Error(F("SD ERROR"), true);
}
}
display_Clear();
LED_RED_OFF;
LED_GREEN_OFF;
sd.chdir(); // root
filePath[0] = '\0'; // Reset filePath
}
/******************************************
Eeprom Functions
*****************************************/
// EEPROM MAPPING
// 00-01 FOLDER #
// 02-05 SNES/GB READER SETTINGS
// 06 LED - ON/OFF [SNES/GB]
// 07 MAPPER
// 08 PRG SIZE
// 09 CHR SIZE
// 10 RAM SIZE
void resetEEPROM() {
EEPROM_writeAnything(0, 0); // FOLDER #
EEPROM_writeAnything(2, 0); // CARTMODE
EEPROM_writeAnything(3, 0); // RETRY
EEPROM_writeAnything(4, 0); // STATUS
EEPROM_writeAnything(5, 0); // UNKNOWNCRC
EEPROM_writeAnything(6, 1); // LED (RESET TO ON)
EEPROM_writeAnything(7, 0); // MAPPER
EEPROM_writeAnything(8, 0); // PRG SIZE
EEPROM_writeAnything(9, 0); // CHR SIZE
EEPROM_writeAnything(10, 0); // RAM SIZE
}
void EepromStart_NES() {
write_prg_byte(0x800D, 0x00); // sda low, scl low
write_prg_byte(0x800D, 0x60); // sda, scl high
write_prg_byte(0x800D, 0x20); // sda low, scl high
write_prg_byte(0x800D, 0x00); // START
}
void EepromStop_NES() {
write_prg_byte(0x800D, 0x00); // sda, scl low
write_prg_byte(0x800D, 0x20); // sda low, scl high
write_prg_byte(0x800D, 0x60); // sda, scl high
write_prg_byte(0x800D, 0x40); // sda high, scl low
write_prg_byte(0x800D, 0x00); // STOP
}
void EepromSet0_NES() {
write_prg_byte(0x800D, 0x00); // sda low, scl low
write_prg_byte(0x800D, 0x20); // sda low, scl high // 0
write_prg_byte(0x800D, 0x00); // sda low, scl low
}
void EepromSet1_NES() {
write_prg_byte(0x800D, 0x40); // sda high, scl low
write_prg_byte(0x800D, 0x60); // sda high, scl high // 1
write_prg_byte(0x800D, 0x40); // sda high, scl low
write_prg_byte(0x800D, 0x00); // sda low, scl low
}
void EepromStatus_NES() { // ACK
write_prg_byte(0x800D, 0x40); // sda high, scl low
write_prg_byte(0x800D, 0x60); // sda high, scl high
write_prg_byte(0x800D, 0xE0); // sda high, scl high, read high
byte eepStatus = 1;
do {
eepStatus = (read_prg_byte(0x6000) & 0x10) >> 4;
delayMicroseconds(4);
}
while (eepStatus == 1);
write_prg_byte(0x800D, 0x40); // sda high, scl low
}
void EepromReadData_NES() {
// read serial data into buffer
for (int i = 0; i < 8; i++) {
write_prg_byte(0x800D, 0x60); // sda high, scl high, read low
write_prg_byte(0x800D, 0xE0); // sda high, scl high, read high
eepbit[i] = (read_prg_byte(0x6000) & 0x10) >> 4; // Read 0x6000 with Mask 0x10 (bit 4)
write_prg_byte(0x800D, 0x40); // sda high, scl low
}
}
void EepromDevice_NES() { // 24C02 ONLY
EepromSet1_NES();
EepromSet0_NES();
EepromSet1_NES();
EepromSet0_NES();
EepromSet0_NES(); // A2
EepromSet0_NES(); // A1
EepromSet0_NES(); // A0
}
void EepromReadMode_NES() {
EepromSet1_NES(); // READ
EepromStatus_NES(); // ACK
}
void EepromWriteMode_NES() {
EepromSet0_NES(); // WRITE
EepromStatus_NES(); // ACK
}
void EepromFinish_NES() {
write_prg_byte(0x800D, 0x00); // sda low, scl low
write_prg_byte(0x800D, 0x40); // sda high, scl low
write_prg_byte(0x800D, 0x60); // sda high, scl high
write_prg_byte(0x800D, 0x40); // sda high, scl low
write_prg_byte(0x800D, 0x00); // sda low, scl low
}
void EepromSetAddress01(byte address) { // 24C01 [Little Endian]
for (int i = 0; i < 7; i++) {
if (address & 0x1) // Bit is HIGH
EepromSet1_NES();
else // Bit is LOW
EepromSet0_NES();
address >>= 1; // rotate to the next bit
}
}
void EepromSetAddress02(byte address) { // 24C02
for (int i = 0; i < 8; i++) {
if ((address >> 7) & 0x1) // Bit is HIGH
EepromSet1_NES();
else // Bit is LOW
EepromSet0_NES();
address <<= 1; // rotate to the next bit
}
EepromStatus_NES(); // ACK
}
void EepromWriteData01() { // 24C01 [Little Endian]
for (int i = 0; i < 8; i++) {
if (eeptemp & 0x1) // Bit is HIGH
EepromSet1_NES();
else // Bit is LOW
EepromSet0_NES();
eeptemp >>= 1; // rotate to the next bit
}
EepromStatus_NES(); // ACK
}
void EepromWriteData02() { // 24C02
for (int i = 0; i < 8; i++) {
if ((eeptemp >> 7) & 0x1) // Bit is HIGH
EepromSet1_NES();
else // Bit is LOW
EepromSet0_NES();
eeptemp <<= 1; // rotate to the next bit
}
EepromStatus_NES(); // ACK
}
void EepromREAD(byte address) {
EepromStart_NES(); // START
if (mapper == 159) { // 24C01
EepromSetAddress01(address); // 24C01 [Little Endian]
EepromReadMode_NES();
EepromReadData_NES();
EepromFinish_NES();
EepromStop_NES(); // STOP
// OR 8 bits into byte
eeptemp = eepbit[7] << 7 | eepbit[6] << 6 | eepbit[5] << 5 | eepbit[4] << 4 | eepbit[3] << 3 | eepbit[2] << 2 | eepbit[1] << 1 | eepbit[0];
}
else { // 24C02
EepromDevice_NES(); // DEVICE [1010] + ADDR [A2-A0]
EepromWriteMode_NES();
EepromSetAddress02(address);
EepromStart_NES(); // START
EepromDevice_NES(); // DEVICE [1010] + ADDR [A2-A0]
EepromReadMode_NES();
EepromReadData_NES();
EepromFinish_NES();
EepromStop_NES(); // STOP
// OR 8 bits into byte
eeptemp = eepbit[0] << 7 | eepbit[1] << 6 | eepbit[2] << 5 | eepbit[3] << 4 | eepbit[4] << 3 | eepbit[5] << 2 | eepbit[6] << 1 | eepbit[7];
}
sdBuffer[address] = eeptemp;
}
void EepromWRITE(byte address) {
eeptemp = sdBuffer[address];
EepromStart_NES(); // START
if (mapper == 159) { // 24C01
EepromSetAddress01(address); // 24C01 [Little Endian]
EepromWriteMode_NES();
EepromWriteData01(); // 24C01 [Little Endian]
}
else { // 24C02
EepromDevice_NES(); // DEVICE [1010] + ADDR [A2-A0]
EepromWriteMode_NES();
EepromSetAddress02(address);
EepromWriteData02();
}
EepromStop_NES(); // STOP
}
/******************************************
NESmaker Flash Cart [SST 39SF40]
*****************************************/
void NESmaker_ResetFlash() { // Reset Flash
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xFF); // Reset
}
// SST 39SF040 Software ID
void NESmaker_ID() { // Read Flash ID
NESmaker_ResetFlash();
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0x90); // Software ID Entry
unsigned char ID1 = read_prg_byte(0x8000);
unsigned char ID2 = read_prg_byte(0x8001);
sprintf(flashID, "%02X%02X", ID1, ID2);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xF0); // Software ID Exit
if (strcmp(flashID, "BFB7") == 0) // SST 39SF040
flashfound = 1;
}
void NESmaker_SectorErase(byte bank, word address) {
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0x80);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, bank); // $00-$1F
write_prg_byte(address, 0x30); // Sector Erase ($8000/$9000/$A000/$B000)
}
void NESmaker_ByteProgram(byte bank, word address, byte data) {
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xA0);
write_prg_byte(0xC000, bank); // $00-$1F
write_prg_byte(address, data); // $8000-$BFFF
}
// SST 39SF040 Chip Erase [NOT IMPLEMENTED]
void NESmaker_ChipErase() { // Typical 70ms
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0x80);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0xAA);
write_prg_byte(0xC000, 0x00);
write_prg_byte(0xAAAA, 0x55);
write_prg_byte(0xC000, 0x01);
write_prg_byte(0x9555, 0x10); // Chip Erase
}
void writeFLASH() {
display_Clear();
if (!flashfound) {
LED_RED_ON;
println_Msg(F("FLASH NOT DETECTED"));
display_Update();
}
else {
print_Msg(F("Flash ID: "));
println_Msg(flashID);
println_Msg(F(""));
println_Msg(F("NESmaker Flash Found"));
println_Msg(F(""));
display_Update();
delay(100);
fileBrowser(F("Select FLASH File"));
word base = 0x8000;
sd.chdir();
sprintf(filePath, "%s/%s", filePath, fileName);
LED_RED_ON;
display_Clear();
println_Msg(F("Writing File: "));
println_Msg(filePath);
println_Msg(fileName);
display_Update();
//open file on sd card
if (sdFile.open(filePath, O_READ)) {
banks = int_pow(2, prgsize); // 256K/512K
for (int i = 0; i < banks; i++) { // 16K Banks
for (word sector = 0; sector < 0x4000; sector += 0x1000) { // 4K Sectors ($8000/$9000/$A000/$B000)
// Sector Erase
NESmaker_SectorErase(i, base + sector);
delay(18); // Typical 18ms
for (byte j = 0; j < 2; j++) { // Confirm erase twice
do {
bytecheck = read_prg_byte(base + sector);
delay(18);
}
while (bytecheck != 0xFF);
}
// Program Byte
for (word addr = 0x0; addr < 0x1000; addr += 512) {
sdFile.read(sdBuffer, 512);
for (int x = 0; x < 512; x++) {
word location = base + sector + addr + x;
NESmaker_ByteProgram(i, base + sector + addr + x, sdBuffer[x]);
delayMicroseconds(14); // Typical 14us
for (byte k = 0; k < 2; k++) { // Confirm write twice
do {
bytecheck = read_prg_byte(base + sector + addr + x);
delayMicroseconds(14);
}
while (bytecheck != sdBuffer[x]);
}
}
}
}
#ifdef OLED
display.print(F("*"));
display.display();
#else
Serial.print(F("*"));
if ((i != 0) && ((i + 1) % 16 == 0))
Serial.println(F(""));
#endif
}
sdFile.close();
LED_GREEN_ON;
println_Msg(F(""));
println_Msg(F("FLASH FILE WRITTEN!"));
display_Update();
}
else {
LED_RED_ON;
println_Msg(F("SD ERROR"));
display_Update();
}
}
display_Clear();
LED_RED_OFF;
LED_GREEN_OFF;
sd.chdir(); // root
filePath[0] = '\0'; // Reset filePath
}
#endif
//******************************************
// End of File
//******************************************