From 36502008cf451915620c3a4117211effd0cd7b99 Mon Sep 17 00:00:00 2001 From: sanni Date: Fri, 13 Apr 2018 16:54:08 +0200 Subject: [PATCH] Create README.md --- extras/3dprint/README.md | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 extras/3dprint/README.md diff --git a/extras/3dprint/README.md b/extras/3dprint/README.md new file mode 100644 index 0000000..87e054d --- /dev/null +++ b/extras/3dprint/README.md @@ -0,0 +1,19 @@ +### snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot + +![image](https://dl.dropboxusercontent.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1) + +#### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough + +![image](https://dl.dropboxusercontent.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1) + +#### backplate_tabs.stl is the backplate that holds the Arduino + +![image](https://dl.dropboxusercontent.com/s/01v4d28lzbp1ue4/backplate16.png?dl=1) + +#### sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb + +![image](https://dl.dropboxusercontent.com/s/fn6g1pm88puq8h6/sd_spacer.png?dl=1) + +#### sidewall_tabs.stl secures the Arduino Mega to the backplate with three M2x10 screws + +![image](https://dl.dropboxusercontent.com/s/p7v2l37f1c130b4/sidewall.png?dl=1)