Update README.md

This commit is contained in:
sanni 2020-05-11 14:13:46 +02:00 committed by GitHub
parent a9657975e8
commit 61ff6cff34

View File

@ -8,7 +8,7 @@ thin_walls = 1
# Print settings for Cura 4.x
You can use the Draft 0.2mm profile but you might want to change the build plate adhesion settings since the default seems a bit [too much](https://www.dropbox.com/s/qu8fvjsh33bxjeh/curaprint.jpg?dl=0).
For the N64 sleeve you need to enable the special mode "Spiralize outer Contour" or else the walls will be too thick.
For the N64 sleeve you need to enable the special mode "Spiralize outer Contour" or else the walls might end up too thick.
# Combined STL file with all parts
#### combined.stl has all the needed parts combined into one STL file in case you use a 3D print service that calculates by volume.
@ -44,4 +44,4 @@ For the N64 sleeve you need to enable the special mode "Spiralize outer Contour"
# Battery addon
#### The ***_battery.stl files are alternative designs in case you use the battery add-on and replace the similary named default stls.
#### The xxx_battery.stl files are alternative designs in case you use the battery add-on and replace the similary named default stls.