various: work on SNES SA-1 init / reset; LED: skip red in attract mode, as red usually indicates an error to the user

Cart_Reader/Cart_Reader.ino

@@ -39,6 +39,8 @@
    Gens-gs - Megadrive checksum
 
 **********************************************************************************/
+#include <SdFat.h>
+
 char ver[5] = "3.6";
 
 /******************************************
@@ -71,7 +73,6 @@ char ver[5] = "3.6";
 #include <avr/wdt.h>
 
 // SD Card
-#include <SdFat.h>
 #define sdSpeed SPI_FULL_SPEED
 // SD Card (Pin 50 = MISO, Pin 51 = MOSI, Pin 52 = SCK, Pin 53 = SS)
 #define chipSelectPin 53
@@ -1158,6 +1159,9 @@ unsigned char questionBox_OLED(const __FlashStringHelper* question, char answers
       if ((millis() - idleTime) % 4000 == 0) {
         if (currentColor < 7) {
           currentColor++;
+          if (currentColor == 1) {
+            currentColor = 2; // skip red as that signifies an error to the user
+          }
         }
         else {
           currentColor = 0;

Cart_Reader/SNES.ino

@@ -216,6 +216,11 @@ void snesMenu() {
       DDRH |= (1 << 0);
       // Switch RST(PH0) to LOW
       PORTH &= ~(1 << 0);
+
+      // Note: It is probably not intended to reset CIC or clocks here
+      // But if that's false, uncomment this:
+      // stopSnesClocks_resetCic_resetCart();
+
       display_Clear();
       print_Msg(F("Resetting..."));
       display_Update();
@@ -224,6 +229,7 @@ void snesMenu() {
       break;
 
     case 5:
+      stopSnesClocks_resetCic_resetCart();
       resetArduino();
       break;
   }
@@ -270,11 +276,22 @@ void confMenu() {
 
     case 4:
       // Reset
+      stopSnesClocks_resetCic_resetCart();
       resetArduino();
       break;
   }
 }
 
+void stopSnesClocks_resetCic_resetCart() {
+  DDRG |= (1 << 1);   // Set cicrstPin(PG1) to Output
+  PORTG |= (1 << 1);  // pull high = reset CIC
+  DDRH |= (1 << 0);   // Set RST(PH0) pin to Output
+  PORTH &= ~(1 << 0); // Switch RST(PH0) to LOW
+  clockgen.output_enable(SI5351_CLK1, 0); // CPU clock
+  clockgen.output_enable(SI5351_CLK2, 0); // CIC clock
+  clockgen.output_enable(SI5351_CLK0, 0); // master clock
+}
+
 /******************************************
    Setup
  *****************************************/
@@ -286,16 +303,6 @@ void setup_Snes() {
   // Set cichstPin(PG0) to Input
   DDRG &= ~(1 << 0);
 
-  // Adafruit Clock Generator
-  clockgen.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
-  clockgen.set_pll(SI5351_PLL_FIXED, SI5351_PLLA);
-  clockgen.set_pll(SI5351_PLL_FIXED, SI5351_PLLB);
-  clockgen.set_freq(2147727200ULL, SI5351_CLK0);
-  clockgen.set_freq(307200000ULL, SI5351_CLK2);
-  clockgen.output_enable(SI5351_CLK0, 1);
-  clockgen.output_enable(SI5351_CLK1, 0);
-  clockgen.output_enable(SI5351_CLK2, 1);
-
   // Set Address Pins to Output
   //A0-A7
   DDRF = 0xFF;
@@ -327,7 +334,7 @@ void setup_Snes() {
   // Activate Internal Pullup Resistors
   //PORTH |= (1 << 4);
 
-  // Set expand(PG5) to Imput
+  // Set expand(PG5) to Input
   DDRG &= ~(1 << 5);
   // Activate Internal Pullup Resistors
   //PORTG |= (1 << 5);
@@ -348,11 +355,25 @@ void setup_Snes() {
   DDRJ |= (1 << 0);
   //PORTJ &= ~(1 << 0);
 
+  // Adafruit Clock Generator
+  clockgen.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
+  clockgen.set_pll(SI5351_PLL_FIXED, SI5351_PLLA);
+  clockgen.set_pll(SI5351_PLL_FIXED, SI5351_PLLB);
+  clockgen.set_freq(2147727200ULL, SI5351_CLK0);
+  clockgen.set_freq(357954500ULL, SI5351_CLK1);
+  clockgen.set_freq(307200000ULL, SI5351_CLK2);
+
+  // start outputting master clock, CIC clock
+  clockgen.output_enable(SI5351_CLK1, 0); // no CPU clock yet; seems to affect SA-1 success a lot
+  clockgen.output_enable(SI5351_CLK2, 1); // CIC clock (should go before master clock)
+  clockgen.output_enable(SI5351_CLK0, 1); // master clock
+  delay(8);
+
   // Start CIC by outputting a low signal to cicrstPin(PG1)
   PORTG &= ~(1 << 1);
 
   // Wait for CIC reset
-  delay(1000);
+  delay(320);
 
   // Print all the info
   getCartInfo_SNES();
@@ -1310,7 +1331,6 @@ void writeSRAM (boolean browseFile) {
     else if (romType == SA) {
       long lastByte = (long(sramSize) * 128);
       // Enable CPU Clock
-      clockgen.set_freq(357954500ULL, SI5351_CLK1);
       clockgen.output_enable(SI5351_CLK1, 1);
 
       // Direct writes to BW-RAM (SRAM) in banks 0x40-0x43 don't work
@@ -1689,10 +1709,9 @@ unsigned long verifySRAM() {
       }
       display_Update();
       wait();
-      // Set reset pin to output (PH0)
+
-      DDRH |= (1 << 0);
+      stopSnesClocks_resetCic_resetCart();
-      // Switch RST(PH0) to LOW
+
-      PORTH &= ~(1 << 0);
       display_Clear();
       print_Msg(F("Resetting..."));
       display_Update();
@@ -1808,7 +1827,6 @@ boolean eraseSRAM (byte b) {
   else if (romType == SA) {
     long lastByte = (long(sramSize) * 128);
     // Enable CPU Clock
-    clockgen.set_freq(357954500ULL, SI5351_CLK1);
     clockgen.output_enable(SI5351_CLK1, 1);
 
     // Direct writes to BW-RAM (SRAM) in banks 0x40-0x43 don't work