From 7161504c3e99a16ab16bc36590ccd1282cefcb19 Mon Sep 17 00:00:00 2001 From: sanni Date: Mon, 11 May 2020 12:54:33 +0200 Subject: [PATCH] Update README.md --- case/README.md | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/case/README.md b/case/README.md index 998a52e..4f59ee9 100644 --- a/case/README.md +++ b/case/README.md @@ -20,16 +20,17 @@ For the N64 sleeve you need to enable the special mode "Spiralize outer Contour" ![image](https://dl.dropboxusercontent.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1) -#### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough -![image](https://dl.dropboxusercontent.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1) +#### n64sleeve.stl helps with aligning N64 cartridges +![image](https://dl.dropboxusercontent.com/s/8muv7x1fiz2n169/n64sleeve.png?dl=1) -#### backplate_tabs.stl is the backplate that holds the Arduino +#### backplate_simple.stl is the backplate that holds the Arduino -![image](https://dl.dropboxusercontent.com/s/01v4d28lzbp1ue4/backplate16.png?dl=1) +![image](https://dl.dropboxusercontent.com/s/10pbg2umbp6ylv5/backplate_simple.png?dl=1) #### sd_spacer.stl or microsd_spacer hold the RGB led and fit between the SD card and the Cart Reader pcb (print with clear PLA/ABS) -![image](https://dl.dropboxusercontent.com/s/2nujdtcrzvrh7hg/sd_spacer.png?dl=1) +![image](https://dl.dropboxusercontent.com/s/2nujdtcrzvrh7hg/sd_spacer.png?dl=1) +![image](https://dl.dropboxusercontent.com/s/ch045dkev7al9v7/msdspacer.png?dl=1) #### sidewall_tabs.stl secures the Arduino Mega to the backplate with five M2x8 screws