mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-27 05:21:53 +01:00
Update PCW.ino
- Added : size detection for Multi-pack cartridges - Modified : dump function for Multi-pack cartridges - Added : timing fixes needed for recent HW revisions
This commit is contained in:
PsyK0p4T
GitHub
parent
b11330d31b
commit
8fdd93f293
@ -92,7 +92,8 @@
|
||||
#define ADDR_WRITE DDRC = 0xFF // [OUTPUT]
|
||||
#define DETECTION_SIZE 64
|
||||
|
||||
boolean multipack = 0; // Multi-Pack Cart
|
||||
uint32_t rom_size;
|
||||
boolean multipack;
|
||||
byte bank0;
|
||||
byte bank1;
|
||||
|
||||
@ -127,9 +128,6 @@ void setup_PCW() {
|
||||
// Set Unused Pins HIGH
|
||||
PORTJ |= (1 << 0); // TIME(PJ0)
|
||||
|
||||
// Multi-Pack Cart Check
|
||||
check_multi_PCW();
|
||||
|
||||
strcpy(romName, "PCW");
|
||||
|
||||
mode = mode_PCW;
|
||||
@ -151,10 +149,11 @@ void pcwMenu() {
|
||||
case 0:
|
||||
// Read ROM
|
||||
sd.chdir("/");
|
||||
check_multi_PCW();
|
||||
if (multipack)
|
||||
readMultiROM_PCW();
|
||||
else
|
||||
readROM_PCW();
|
||||
readSingleROM_PCW();
|
||||
sd.chdir("/");
|
||||
break;
|
||||
|
||||
@ -370,99 +369,53 @@ void write_ram_byte_1B_PCW(unsigned long address, unsigned char data) {
|
||||
NAND_1B_HIGH;
|
||||
}
|
||||
|
||||
//==============================================================================
|
||||
// Overload Multi-Pack Bank Switch
|
||||
//
|
||||
// Known Multi-Pack Carts (Yellow Label Carts)
|
||||
// 0BD400 [PS] (2MB Version)
|
||||
// 0BD400 [PS] (4MB Version)
|
||||
// 0BF400 [PL]
|
||||
// 1BF400 [PZ]
|
||||
// 8BD400 [CR]
|
||||
// 8BF400 [LP]
|
||||
// 9BF400 [SLP] (Undumped)
|
||||
//******************************************
|
||||
// SINGLE-PACK FUNCTIONS
|
||||
//******************************************
|
||||
|
||||
// Per Overload, identify multi-pack cart by reading 0x3FFA-0x3FFE
|
||||
// Multi-Pack carts are non-zero
|
||||
// 0x3FFA - Current Cartridge Bank
|
||||
// 0x3FFC - Value to Switch to Cartridge Bank 0
|
||||
// 0x3FFD - Value to Switch to Cartridge Bank 1
|
||||
// 0x3FFE - Last Value written to 0xFFFF
|
||||
uint32_t detect_rom_size_PCW(void) {
|
||||
uint8_t read_byte;
|
||||
uint8_t current_byte;
|
||||
uint8_t detect_1m, detect_2m;
|
||||
|
||||
// Bank Settings for 2MB
|
||||
// Write 0x28 to 0xFFFF to read 1st half of ROM
|
||||
// Write 0x2E to 0xFFFF to read 2nd half of ROM
|
||||
//Initialize variables
|
||||
detect_1m = 0;
|
||||
detect_2m = 0;
|
||||
|
||||
// Bank Settings for 4MB
|
||||
// Write 0x20 to 0xFFFF to read 1st half of ROM
|
||||
// Write 0x31 to 0xFFFF to read 2nd half of ROM
|
||||
//Confirm where mirror address starts from (1MB, 2MB or 4MB)
|
||||
for (current_byte = 0; current_byte < DETECTION_SIZE; current_byte++) {
|
||||
if ((current_byte != detect_1m) && (current_byte != detect_2m)) {
|
||||
//If none matched, size is 4MB
|
||||
break;
|
||||
}
|
||||
|
||||
// MULTI-PACK CART CHECK
|
||||
void check_multi_PCW() {
|
||||
read_setup_PCW();
|
||||
byte tempbyte = read_rom_byte_PCW(0x3FFC); // Bank 0 Switch
|
||||
if (tempbyte) {
|
||||
bank0 = tempbyte; // Store Bank 0 Switch
|
||||
tempbyte = read_rom_byte_PCW(0x3FFD); // Bank 1 Switch
|
||||
if (tempbyte) {
|
||||
bank1 = tempbyte; // Store Bank 1 Switch
|
||||
// Check for 00s
|
||||
tempbyte = read_rom_byte_PCW(0x3FFB); // Should be 00
|
||||
if (!tempbyte) {
|
||||
tempbyte = read_rom_byte_PCW(0x3FFF); // Should be 00
|
||||
if (!tempbyte)
|
||||
multipack = 1; // Flag Multi-Cart
|
||||
else {
|
||||
bank0 = 0;
|
||||
bank1 = 0;
|
||||
}
|
||||
read_byte = read_rom_byte_PCW(current_byte);
|
||||
|
||||
if (current_byte == detect_1m) {
|
||||
if (read_rom_byte_PCW(0x100000 + current_byte) == read_byte) {
|
||||
detect_1m++;
|
||||
}
|
||||
}
|
||||
if (current_byte == detect_2m) {
|
||||
if (read_rom_byte_PCW(0x200000 + current_byte) == read_byte) {
|
||||
detect_2m++;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void write_bank_byte_PCW(unsigned char data) {
|
||||
NAND_1A_LOW;
|
||||
NAND_1A_HIGH;
|
||||
NAND_1B_LOW;
|
||||
// Write to Address 0xFFFF
|
||||
PORTL = 0x00;
|
||||
PORTK = 0xFF; // A8-A15
|
||||
// Latch Address on AD0-AD7
|
||||
ADDR_WRITE;
|
||||
LE_HIGH; // Latch Enable
|
||||
PORTC = 0xFF; // A0-A7
|
||||
LE_LOW; // Address Latched
|
||||
// Write Data on AD0-AD7 - WE LOW ~728-736ns
|
||||
WE_LOW;
|
||||
PORTC = data;
|
||||
__asm__("nop\n\t"
|
||||
"nop\n\t"
|
||||
"nop\n\t"
|
||||
"nop\n\t"
|
||||
"nop\n\t");
|
||||
__asm__("nop\n\t"
|
||||
"nop\n\t"
|
||||
"nop\n\t"
|
||||
"nop\n\t"
|
||||
"nop\n\t");
|
||||
WE_HIGH;
|
||||
NAND_1B_HIGH;
|
||||
}
|
||||
|
||||
void switchBank_PCW(int bank) {
|
||||
if (bank == 1) { // Upper Half
|
||||
write_bank_byte_PCW(bank1);
|
||||
} else { // Lower Half (default)
|
||||
write_bank_byte_PCW(bank0);
|
||||
//ROM size detection
|
||||
if (detect_1m == DETECTION_SIZE) {
|
||||
rom_size = 0x100000;
|
||||
} else if (detect_2m == DETECTION_SIZE) {
|
||||
rom_size = 0x200000;
|
||||
} else {
|
||||
rom_size = 0x400000;
|
||||
}
|
||||
|
||||
return rom_size;
|
||||
}
|
||||
|
||||
//******************************************
|
||||
// READ ROM FUNCTIONS
|
||||
//******************************************
|
||||
|
||||
void readROM_PCW() {
|
||||
void readSingleROM_PCW() {
|
||||
// Setup read mode
|
||||
read_setup_PCW();
|
||||
|
||||
@ -473,7 +426,6 @@ void readROM_PCW() {
|
||||
print_Msg(rom_size / 1024 / 1024);
|
||||
print_Msg("MB SINGLE-PACK");
|
||||
println_Msg(F(""));
|
||||
display_Update();
|
||||
|
||||
// Create file
|
||||
strcpy(fileName, romName);
|
||||
@ -516,22 +468,112 @@ void readROM_PCW() {
|
||||
|
||||
// Wait for user input
|
||||
println_Msg(F(""));
|
||||
// Prints string out of the common strings array either with or without newline
|
||||
print_STR(press_button_STR, 1);
|
||||
display_Update();
|
||||
wait();
|
||||
}
|
||||
|
||||
//******************************************
|
||||
// MULTI-PACK FUNCTIONS
|
||||
//******************************************
|
||||
|
||||
// Known Multi-Pack Carts (Yellow Label Carts)
|
||||
// 0BD400 [PS] (2MB Version)
|
||||
// 0BD400 [PS] (4MB Version)
|
||||
// 0BF400 [PL]
|
||||
// 1BF400 [PZ]
|
||||
// 8BD400 [CR]
|
||||
// 8BF400 [LP]
|
||||
// 9BF400 [SLP] (Undumped)
|
||||
|
||||
// Per Overload, identify multi-pack cart by reading 0x3FFA-0x3FFE. Multi-Pack carts are non-zero.
|
||||
// 0x3FFA - Current Cartridge Bank
|
||||
// 0x3FFC - Value to Switch to Cartridge Bank 0
|
||||
// 0x3FFD - Value to Switch to Cartridge Bank 1
|
||||
// 0x3FFE - Last Value written to 0xFFFF
|
||||
|
||||
// Bank Settings for 2MB
|
||||
// Write 0x28 to 0xFFFF to read 1st half of ROM
|
||||
// Write 0x2E to 0xFFFF to read 2nd half of ROM
|
||||
|
||||
// Bank Settings for 4MB
|
||||
// Write 0x20 to 0xFFFF to read 1st half of ROM
|
||||
// Write 0x31 to 0xFFFF to read 2nd half of ROM
|
||||
|
||||
void check_multi_PCW() {
|
||||
// init variables
|
||||
read_setup_PCW();
|
||||
multipack = 0;
|
||||
bank0 = 0;
|
||||
bank1 = 0;
|
||||
|
||||
byte tempbyte = read_rom_byte_PCW(0x3FFC); // Check for a bank 0 switch value
|
||||
if (tempbyte) {
|
||||
bank0 = tempbyte; // Store bank 0 switch value
|
||||
tempbyte = read_rom_byte_PCW(0x3FFD); // Check for a bank 1 switch value
|
||||
if (tempbyte) {
|
||||
bank1 = tempbyte; // Store bank 1 switch value
|
||||
if (!read_rom_byte_PCW(0x3FFB) && !read_rom_byte_PCW(0x3FFF)) { // Check for 00s
|
||||
multipack = 1; // Flag as multi-pack
|
||||
display_Clear();
|
||||
if ((bank0 == 0x28) && (bank1 == 0x2E)) // 2MB multi-pack cart
|
||||
rom_size = 0x200000;
|
||||
else if ((bank0 == 0x20) && (bank1 == 0x31)) // 4MB multi-pack cart
|
||||
rom_size = 0x400000;
|
||||
else { // Warn for unknown bank switch values, size set to 4MB
|
||||
println_Msg(F("Warning: Unknown cart size"));
|
||||
rom_size = 0x400000;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void write_bank_byte_PCW(unsigned char data) {
|
||||
NAND_1A_LOW;
|
||||
NAND_1A_HIGH;
|
||||
NAND_1B_LOW;
|
||||
// Write to Address 0xFFFF
|
||||
PORTL = 0x00;
|
||||
PORTK = 0xFF; // A8-A15
|
||||
// Latch Address on AD0-AD7
|
||||
ADDR_WRITE;
|
||||
LE_HIGH; // Latch Enable
|
||||
PORTC = 0xFF; // A0-A7
|
||||
LE_LOW; // Address Latched
|
||||
// Write Data on AD0-AD7 - WE LOW ~728-736ns
|
||||
WE_LOW;
|
||||
PORTC = data;
|
||||
|
||||
for (unsigned int x = 0; x < 40; x++)
|
||||
__asm__("nop\n\t");
|
||||
|
||||
WE_HIGH;
|
||||
NAND_1B_HIGH;
|
||||
}
|
||||
|
||||
void switchBank_PCW(int bank) {
|
||||
if (bank == 1) { // Upper Half
|
||||
write_bank_byte_PCW(bank1);
|
||||
} else { // Lower Half (default)
|
||||
write_bank_byte_PCW(bank0);
|
||||
}
|
||||
}
|
||||
|
||||
void readMultiROM_PCW() {
|
||||
print_Msg(F("READING "));
|
||||
print_Msg(rom_size / 1024 / 1024);
|
||||
print_Msg("MB MULTI-PACK");
|
||||
println_Msg(F(""));
|
||||
|
||||
// Create file
|
||||
strcpy(fileName, romName);
|
||||
strcat(fileName, ".pcw");
|
||||
|
||||
EEPROM_readAnything(0, foldern);
|
||||
sprintf(folder, "PCW/ROM/%d", foldern);
|
||||
sd.mkdir(folder, true);
|
||||
sd.chdir(folder);
|
||||
|
||||
display_Clear();
|
||||
print_STR(saving_to_STR, 0);
|
||||
print_Msg(folder);
|
||||
println_Msg(F("/..."));
|
||||
@ -544,41 +586,37 @@ void readMultiROM_PCW() {
|
||||
print_FatalError(sd_error_STR);
|
||||
}
|
||||
|
||||
display_Clear();
|
||||
println_Msg(F("READING MULTI-PACK"));
|
||||
println_Msg(F(""));
|
||||
display_Update();
|
||||
|
||||
// Init progress bar
|
||||
uint32_t progress = 0;
|
||||
draw_progressbar(0, 0x400000);
|
||||
draw_progressbar(0, rom_size);
|
||||
|
||||
read_setup_PCW();
|
||||
// Lower Half
|
||||
read_setup_PCW();
|
||||
switchBank_PCW(0);
|
||||
for (unsigned long address = 0; address < 0x200000; address += 512) { // 2MB
|
||||
for (unsigned long address = 0; address < (rom_size / 2); address += 512) {
|
||||
for (unsigned int x = 0; x < 512; x++) {
|
||||
sdBuffer[x] = read_rom_byte_PCW(address + x);
|
||||
}
|
||||
myFile.write(sdBuffer, 512);
|
||||
progress += 512;
|
||||
draw_progressbar(progress, 0x400000);
|
||||
draw_progressbar(progress, rom_size);
|
||||
}
|
||||
|
||||
read_setup_PCW();
|
||||
// Upper Half
|
||||
read_setup_PCW();
|
||||
switchBank_PCW(1);
|
||||
for (unsigned long address = 0x200000; address < 0x400000; address += 512) { // 2MB
|
||||
for (unsigned long address = 0x200000; address < (0x200000 + (rom_size / 2)); address += 512) {
|
||||
for (unsigned int x = 0; x < 512; x++) {
|
||||
sdBuffer[x] = read_rom_byte_PCW(address + x);
|
||||
}
|
||||
myFile.write(sdBuffer, 512);
|
||||
progress += 512;
|
||||
draw_progressbar(progress, 0x400000);
|
||||
draw_progressbar(progress, rom_size);
|
||||
}
|
||||
|
||||
myFile.flush();
|
||||
myFile.close();
|
||||
|
||||
// Reset Bank
|
||||
switchBank_PCW(0);
|
||||
|
||||
@ -588,55 +626,11 @@ void readMultiROM_PCW() {
|
||||
|
||||
// Wait for user input
|
||||
println_Msg(F(""));
|
||||
// Prints string out of the common strings array either with or without newline
|
||||
print_STR(press_button_STR, 1);
|
||||
display_Update();
|
||||
wait();
|
||||
}
|
||||
|
||||
uint32_t detect_rom_size_PCW(void) {
|
||||
uint32_t rom_size;
|
||||
uint8_t read_byte;
|
||||
uint8_t current_byte;
|
||||
uint8_t detect_1m, detect_2m;
|
||||
|
||||
//Initialize variables
|
||||
detect_1m = 0;
|
||||
detect_2m = 0;
|
||||
|
||||
//Confirm where mirror address starts from (1MB, 2MB or 4MB)
|
||||
for (current_byte = 0; current_byte < DETECTION_SIZE; current_byte++) {
|
||||
if ((current_byte != detect_1m) && (current_byte != detect_2m)) {
|
||||
//If none matched, size is 4MB
|
||||
break;
|
||||
}
|
||||
|
||||
read_byte = read_rom_byte_PCW(current_byte);
|
||||
|
||||
if (current_byte == detect_1m) {
|
||||
if (read_rom_byte_PCW(0x100000 + current_byte) == read_byte) {
|
||||
detect_1m++;
|
||||
}
|
||||
}
|
||||
if (current_byte == detect_2m) {
|
||||
if (read_rom_byte_PCW(0x200000 + current_byte) == read_byte) {
|
||||
detect_2m++;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//ROM size detection
|
||||
if (detect_1m == DETECTION_SIZE) {
|
||||
rom_size = 0x100000;
|
||||
} else if (detect_2m == DETECTION_SIZE) {
|
||||
rom_size = 0x200000;
|
||||
} else {
|
||||
rom_size = 0x400000;
|
||||
}
|
||||
|
||||
return rom_size;
|
||||
}
|
||||
|
||||
//******************************************
|
||||
// SRAM FUNCTIONS
|
||||
//******************************************
|
||||
|
||||
Loading…
Reference in New Issue
Block a user