Update README.md

This commit is contained in:
sanni 2020-05-11 14:03:13 +02:00 committed by GitHub
parent 004c0c426b
commit 94e86669ee

View File

@ -7,7 +7,7 @@ perimeters = 1
thin_walls = 1
# Print settings for Cura 4.x
You can use the Draft 0.2mm profile but you might want to change the build plate adhesion settings since the default seems a bit ![too much](https://www.dropbox.com/s/qu8fvjsh33bxjeh/curaprint.jpg?dl=0).
You can use the Draft 0.2mm profile but you might want to change the build plate adhesion settings since the default seems a bit [too much](https://www.dropbox.com/s/qu8fvjsh33bxjeh/curaprint.jpg?dl=0).
For the N64 sleeve you need to enable the special mode "Spiralize outer Contour" or else the walls will be too thick.
# Combined STL file with all parts