Mirrors/cartreader
2
0
Fork 0
mirror of https://github.com/sanni/cartreader.git synced 2024-11-13 08:25:05 +01:00
Code Issues Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
sanni 2019-09-08 11:56:15 +02:00 committed by GitHub
parent f79c169782
commit b7e45b21e4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 24 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
extras/npwriter/README.md
View File

@ -6,18 +6,39 @@ Configure the switches like so and use the USB port that is connected directly t
![image](https://dl.dropboxusercontent.com/s/yzewnnx5mb2ajk0/flash_firmware.jpg?dl=1) ![image](https://dl.dropboxusercontent.com/s/yzewnnx5mb2ajk0/flash_firmware.jpg?dl=1)
First send "8" to switch the cart to "hirom all" mode. Check that it did succeed: In the Arduino IDE select the correct Serial Port under Tools then open the Serial Monitor, make sure the baud is set to "9600" and in the box in front of the baudrate there should be "No line ending" selected.
First send "8" via the text box and "Send" button at the top of the Serial Monitor windows. This will switch the cart to "hirom all" mode. It should give you the following feedback somewhere in the text box. Check that it did succeed:
```
(8)HIROM ALL 0x04 (8)HIROM ALL 0x04
Success Success
2A 4 2A 2A FE 61 A5 0 2A 4 2A 2A FE 61 A5 0
```
In case it failed close the Serial Monitor and switch the Arduino Mega off and on again and start from the beginning. In case it failed close the Serial Monitor and switch the Arduino Mega off and on again and start from the beginning.
Next send "q" to unlock the write protection: Next send "q" to unlock the write protection:
```
(Q)Unlock WP (Q)Unlock WP
Success. Success.
2A 4 2A 2A FE 61 A5 0 2A 4 2A 2A FE 61 A5 0
```
Before you write anything you should always do a backup of your rom and mapping. Before you write anything you should always do a backup of your rom and mapping.
To flash something new you need to erase both the flash and the mapping first before you send the write command. So next send "h" and then send a filename like "original.map" to save your carts original mapping.
```
Reading mapping into file original.map
Done.
```
Now save the flash by sending "d" and again choosing a filename like "flash.bin", it should now beginn to print dots to indicate progress.
```
Reading flash into file flash.bin
................................................................
```
Finally you can split the flash.bin file into the individual roms using the NP Split program: https://github.com/sanni/cartreader/tree/master/extras/npsplit
To flash something new you need to erase both the flash and the mapping first before you send the write command. Flashing the Nintendo Power Cart is more complicated since you need to provide it with a mapping.map and flash.bin file. You can create those files with the SF Memory Binary Maker: https://github.com/moldov/SF-Memory-Binary-Maker
![](https://dl.dropboxusercontent.com/s/7ptv5hdf4iwi0lb/npwriter10.jpg?dl=1) ![](https://dl.dropboxusercontent.com/s/7ptv5hdf4iwi0lb/npwriter10.jpg?dl=1)