mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-27 23:14:14 +01:00
V26: Flashrom Programmer Bugfixes
- It seems like flashroms in the 16bit slot like the 29L3211 were accidentally programmed byte swapped up until now and only the 8bit slot worked correctly. - You can now program files smaller than the flashrom's size without getting a verification error - Added the special 29F1601 flashrom taken out of the Nintendo Power SF Memory carts
This commit is contained in:
sanni
GitHub
parent
b412ca0615
commit
e6d49feb92
@ -2,8 +2,8 @@
|
||||
Cartridge Reader for Arduino Mega2560
|
||||
|
||||
Author: sanni
|
||||
Date: 2017-06-10
|
||||
Version: V25D
|
||||
Date: 2017-06-25
|
||||
Version: V26
|
||||
|
||||
SD lib: https://github.com/greiman/SdFat
|
||||
LCD lib: https://github.com/adafruit/Adafruit_SSD1306
|
||||
@ -34,7 +34,7 @@
|
||||
YamaArashi - GBA flashrom bank switch command
|
||||
|
||||
**********************************************************************************/
|
||||
char ver[5] = "V25D";
|
||||
char ver[5] = "V26";
|
||||
|
||||
/******************************************
|
||||
Define Output
|
||||
@ -190,6 +190,7 @@ byte romVersion = 0;
|
||||
char cartID[5];
|
||||
unsigned long cartSize;
|
||||
char flashid[5];
|
||||
unsigned long fileSize;
|
||||
|
||||
// Variable to count errors
|
||||
unsigned long writeErrors;
|
||||
@ -962,7 +963,7 @@ void wait_btn() {
|
||||
// if the cart readers input button is pressed long
|
||||
if (b == 3) {
|
||||
if (errorLvl) {
|
||||
// Debug
|
||||
// Debug
|
||||
//ignoreError = 1;
|
||||
errorLvl = 0;
|
||||
}
|
||||
|
||||
@ -68,8 +68,6 @@ void flashromMenu8() {
|
||||
}
|
||||
else {
|
||||
eraseFlash29F1610();
|
||||
delay(1000);
|
||||
busyCheck29F1610();
|
||||
}
|
||||
println_Msg(F("Flashrom erased"));
|
||||
display_Update();
|
||||
@ -96,21 +94,22 @@ void flashromMenu8() {
|
||||
time = millis();
|
||||
if (flashromType == 1)
|
||||
writeFlash29F032();
|
||||
else if (flashromType == 2)
|
||||
writeFlash29F1610();
|
||||
|
||||
else if (flashromType == 2) {
|
||||
if (strcmp(flashid, "C2F3") == 0)
|
||||
writeFlash29F1601();
|
||||
else
|
||||
writeFlash29F1610();
|
||||
}
|
||||
delay(100);
|
||||
// Reset twice just to be sure
|
||||
delay(1000);
|
||||
if (flashromType == 1)
|
||||
resetFlash29F032();
|
||||
else
|
||||
resetFlash29F1610();
|
||||
delay(1000);
|
||||
if (flashromType == 1)
|
||||
resetFlash29F032();
|
||||
else
|
||||
resetFlash29F1610();
|
||||
delay(1000);
|
||||
verifyFlash();
|
||||
break;
|
||||
|
||||
@ -150,7 +149,6 @@ void flashromMenu8() {
|
||||
resetFlash29F032();
|
||||
else
|
||||
resetFlash29F1610();
|
||||
delay(500);
|
||||
asm volatile (" jmp 0");
|
||||
break;
|
||||
}
|
||||
@ -189,12 +187,10 @@ void flashromMenu16() {
|
||||
println_Msg(F("Erase Flashrom"));
|
||||
display_Update();
|
||||
time = millis();
|
||||
resetFlash16();
|
||||
eraseFlash16();
|
||||
delay(1000);
|
||||
busyCheck16();
|
||||
println_Msg(F("Flashrom erased."));
|
||||
display_Update();
|
||||
resetFlash16();
|
||||
break;
|
||||
|
||||
case 2:
|
||||
@ -210,7 +206,12 @@ void flashromMenu16() {
|
||||
fileBrowser("Select file");
|
||||
display_Clear();
|
||||
time = millis();
|
||||
writeFlash16();
|
||||
if (strcmp(flashid, "C2F3") == 0) {
|
||||
writeFlash16_29F1601();
|
||||
}
|
||||
else {
|
||||
writeFlash16();
|
||||
}
|
||||
delay(100);
|
||||
resetFlash16();
|
||||
delay(100);
|
||||
@ -241,7 +242,6 @@ void flashromMenu16() {
|
||||
display_Clear();
|
||||
display_Update();
|
||||
resetFlash16();
|
||||
delay(500);
|
||||
asm volatile (" jmp 0");
|
||||
break;
|
||||
}
|
||||
@ -296,6 +296,11 @@ idtheflash:
|
||||
flashSize = 2097152;
|
||||
flashromType = 2;
|
||||
}
|
||||
else if (strcmp(flashid, "C2F3") == 0) {
|
||||
println_Msg(F("MX29F1601 detected"));
|
||||
flashSize = 2097152;
|
||||
flashromType = 2;
|
||||
}
|
||||
else if (strcmp(flashid, "C2F9") == 0) {
|
||||
println_Msg(F("MX29L3211 detected"));
|
||||
println_Msg(F("ATTENTION 3.3V"));
|
||||
@ -359,7 +364,7 @@ void setup_Flash16() {
|
||||
// Setting CE(PH6) LOW
|
||||
PORTH &= ~(1 << 6);
|
||||
|
||||
delay(10);
|
||||
delay(100);
|
||||
|
||||
// ID flash
|
||||
idFlash16();
|
||||
@ -375,6 +380,11 @@ void setup_Flash16() {
|
||||
flashSize = 2097152;
|
||||
flashromType = 2;
|
||||
}
|
||||
else if (strcmp(flashid, "C2F3") == 0) {
|
||||
println_Msg(F("MX29F1601 detected"));
|
||||
flashSize = 2097152;
|
||||
flashromType = 2;
|
||||
}
|
||||
else if (strcmp(flashid, "C2F9") == 0) {
|
||||
println_Msg(F("MX29L3211 detected"));
|
||||
println_Msg(F("ATTENTION 3.3V"));
|
||||
@ -522,6 +532,8 @@ void resetFlash29F032() {
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn8();
|
||||
|
||||
delay(500);
|
||||
}
|
||||
|
||||
void idFlash29F032() {
|
||||
@ -578,12 +590,16 @@ void writeFlash29F032() {
|
||||
|
||||
// Open file on sd card
|
||||
if (myFile.open(filePath, O_READ)) {
|
||||
// Get rom size from file
|
||||
fileSize = myFile.fileSize();
|
||||
if (fileSize > flashSize)
|
||||
print_Error(F("File size exceeds flash size."), true);
|
||||
|
||||
// Set data pins to output
|
||||
dataOut();
|
||||
|
||||
// Fill sdBuffer
|
||||
for (unsigned long currByte = 0; currByte < flashSize; currByte += 512) {
|
||||
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
|
||||
myFile.read(sdBuffer, 512);
|
||||
// Blink led
|
||||
if (currByte % 2048 == 0)
|
||||
@ -644,6 +660,8 @@ void resetFlash29F1610() {
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn8();
|
||||
|
||||
delay(500);
|
||||
}
|
||||
|
||||
void writeFlash29F1610() {
|
||||
@ -655,10 +673,15 @@ void writeFlash29F1610() {
|
||||
|
||||
// Open file on sd card
|
||||
if (myFile.open(filePath, O_READ)) {
|
||||
// Get rom size from file
|
||||
fileSize = myFile.fileSize();
|
||||
if (fileSize > flashSize)
|
||||
print_Error(F("File size exceeds flash size."), true);
|
||||
|
||||
// Set data pins to output
|
||||
dataOut();
|
||||
|
||||
for (unsigned long currByte = 0; currByte < flashSize; currByte += 128) {
|
||||
for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {
|
||||
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
|
||||
myFile.read(sdBuffer, 128);
|
||||
|
||||
@ -681,6 +704,69 @@ void writeFlash29F1610() {
|
||||
}
|
||||
}
|
||||
|
||||
// Check if write is complete
|
||||
busyCheck29F1610();
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn8();
|
||||
|
||||
// Close the file:
|
||||
myFile.close();
|
||||
}
|
||||
else {
|
||||
println_Msg(F("Can't open file on SD"));
|
||||
display_Update();
|
||||
}
|
||||
}
|
||||
|
||||
void writeFlash29F1601() {
|
||||
// Create filepath
|
||||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||||
println_Msg(F("Flashing file "));
|
||||
println_Msg(filePath);
|
||||
display_Update();
|
||||
|
||||
// Open file on sd card
|
||||
if (myFile.open(filePath, O_READ)) {
|
||||
// Get rom size from file
|
||||
fileSize = myFile.fileSize();
|
||||
if (fileSize > flashSize)
|
||||
print_Error(F("File size exceeds flash size."), true);
|
||||
|
||||
// Set data pins to output
|
||||
dataOut();
|
||||
|
||||
for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {
|
||||
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
|
||||
myFile.read(sdBuffer, 128);
|
||||
|
||||
// Blink led
|
||||
if (currByte % 3072 == 0)
|
||||
PORTB ^= (1 << 4);
|
||||
|
||||
// Check if write is complete
|
||||
delayMicroseconds(100);
|
||||
busyCheck29F1610();
|
||||
|
||||
// Write command sequence
|
||||
writeByte_Flash(0x5555 << 1, 0xaa);
|
||||
writeByte_Flash(0x2aaa << 1, 0x55);
|
||||
writeByte_Flash(0x5555 << 1, 0xa0);
|
||||
|
||||
// Write one full page at a time
|
||||
for (byte c = 0; c < 128; c++) {
|
||||
writeByte_Flash(currByte + c, sdBuffer[c]);
|
||||
|
||||
if (c == 127) {
|
||||
// Write the last byte twice or else it won't write at all
|
||||
writeByte_Flash(currByte + c, sdBuffer[c]);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Check if write is complete
|
||||
busyCheck29F1610();
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn8();
|
||||
|
||||
@ -740,6 +826,8 @@ void eraseFlash29F1610() {
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn8();
|
||||
|
||||
busyCheck29F1610();
|
||||
}
|
||||
|
||||
// Delay between write operations based on status register
|
||||
@ -783,15 +871,18 @@ void blankcheck_Flash() {
|
||||
}
|
||||
|
||||
void verifyFlash() {
|
||||
println_Msg(F("Verifying against"));
|
||||
println_Msg(filePath);
|
||||
println_Msg(F("Verifying..."));
|
||||
display_Update();
|
||||
|
||||
// Open file on sd card
|
||||
if (myFile.open(filePath, O_READ)) {
|
||||
// Get rom size from file
|
||||
fileSize = myFile.fileSize();
|
||||
if (fileSize > flashSize)
|
||||
print_Error(F("File size exceeds flash size."), true);
|
||||
|
||||
blank = 0;
|
||||
for (unsigned long currByte = 0; currByte < flashSize; currByte += 512) {
|
||||
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
|
||||
//fill sdBuffer
|
||||
myFile.read(sdBuffer, 512);
|
||||
for (int c = 0; c < 512; c++) {
|
||||
@ -887,6 +978,8 @@ void resetFlash16() {
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn16();
|
||||
|
||||
delay(500);
|
||||
}
|
||||
|
||||
void writeFlash16() {
|
||||
@ -898,12 +991,17 @@ void writeFlash16() {
|
||||
|
||||
// Open file on sd card
|
||||
if (myFile.open(filePath, O_READ)) {
|
||||
// Get rom size from file
|
||||
fileSize = myFile.fileSize();
|
||||
if (fileSize > flashSize)
|
||||
print_Error(F("File size exceeds flash size."), true);
|
||||
|
||||
// Set data pins to output
|
||||
dataOut16();
|
||||
|
||||
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
|
||||
int d = 0;
|
||||
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte += 64) {
|
||||
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) {
|
||||
myFile.read(sdBuffer, 128);
|
||||
|
||||
// Blink led
|
||||
@ -921,13 +1019,80 @@ void writeFlash16() {
|
||||
|
||||
// Write one full page at a time
|
||||
for (byte c = 0; c < 64; c++) {
|
||||
word currWord = ((sdBuffer[d + 1] << 8) | sdBuffer[d]);
|
||||
word currWord = ( ( sdBuffer[d] & 0xFF ) << 8 ) | ( sdBuffer[d + 1] & 0xFF );
|
||||
writeWord_Flash(currByte + c, currWord);
|
||||
d += 2;
|
||||
}
|
||||
d = 0;
|
||||
}
|
||||
|
||||
// Check if write is complete
|
||||
busyCheck16();
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn16();
|
||||
|
||||
// Close the file:
|
||||
myFile.close();
|
||||
}
|
||||
else {
|
||||
println_Msg(F("Can't open file on SD."));
|
||||
display_Update();
|
||||
}
|
||||
}
|
||||
|
||||
void writeFlash16_29F1601() {
|
||||
// Create filepath
|
||||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||||
println_Msg(F("Flashing file "));
|
||||
println_Msg(filePath);
|
||||
display_Update();
|
||||
|
||||
// Open file on sd card
|
||||
if (myFile.open(filePath, O_READ)) {
|
||||
// Get rom size from file
|
||||
fileSize = myFile.fileSize();
|
||||
if (fileSize > flashSize)
|
||||
print_Error(F("File size exceeds flash size."), true);
|
||||
|
||||
// Set data pins to output
|
||||
dataOut16();
|
||||
|
||||
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
|
||||
int d = 0;
|
||||
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) {
|
||||
myFile.read(sdBuffer, 128);
|
||||
|
||||
// Blink led
|
||||
if (currByte % 2048 == 0)
|
||||
PORTB ^= (1 << 4);
|
||||
|
||||
// Check if write is complete
|
||||
delayMicroseconds(100);
|
||||
busyCheck16();
|
||||
|
||||
// Write command sequence
|
||||
writeWord_Flash(0x5555, 0xaa);
|
||||
writeWord_Flash(0x2aaa, 0x55);
|
||||
writeWord_Flash(0x5555, 0xa0);
|
||||
|
||||
// Write one full page at a time
|
||||
for (byte c = 0; c < 64; c++) {
|
||||
word currWord = ( ( sdBuffer[d] & 0xFF ) << 8 ) | ( sdBuffer[d + 1] & 0xFF );
|
||||
writeWord_Flash(currByte + c, currWord);
|
||||
|
||||
if (c == 63) {
|
||||
// Write the last byte twice or else it won't write at all
|
||||
writeWord_Flash(currByte + c, sdBuffer[d + 1]);
|
||||
}
|
||||
d += 2;
|
||||
}
|
||||
d = 0;
|
||||
}
|
||||
|
||||
// Check if write is complete
|
||||
busyCheck16();
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn16();
|
||||
|
||||
@ -987,6 +1152,8 @@ void eraseFlash16() {
|
||||
|
||||
// Set data pins to input again
|
||||
dataIn16();
|
||||
|
||||
busyCheck16();
|
||||
}
|
||||
|
||||
void blankcheck16() {
|
||||
@ -1006,29 +1173,30 @@ void blankcheck16() {
|
||||
display_Update();
|
||||
}
|
||||
else {
|
||||
println_Msg(F("Error: Not blank!"));
|
||||
display_Update();
|
||||
print_Error(F("Error: Not blank"), false);
|
||||
}
|
||||
}
|
||||
|
||||
void verifyFlash16() {
|
||||
|
||||
println_Msg(F("Verifying against"));
|
||||
println_Msg(filePath);
|
||||
println_Msg(F("Verifying..."));
|
||||
display_Update();
|
||||
|
||||
// Open file on sd card
|
||||
if (myFile.open(filePath, O_READ)) {
|
||||
// Get rom size from file
|
||||
fileSize = myFile.fileSize();
|
||||
if (fileSize > flashSize) {
|
||||
print_Error(F("File size exceeds flash size."), true);
|
||||
}
|
||||
|
||||
blank = 0;
|
||||
word d = 0;
|
||||
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte += 256) {
|
||||
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 256) {
|
||||
//fill sdBuffer
|
||||
myFile.read(sdBuffer, 512);
|
||||
for (int c = 0; c < 256; c++) {
|
||||
word currWord = ((sdBuffer[d] << 8) | sdBuffer[d + 1]);
|
||||
// Swap bytes in word
|
||||
currWord = ((currWord >> 8) & 0x00FF00FF) | ((currWord & 0x00FF00FF) << 8);
|
||||
|
||||
if (readWord_Flash(currByte + c) != currWord) {
|
||||
blank++;
|
||||
}
|
||||
@ -1085,8 +1253,6 @@ void readFlash16() {
|
||||
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte += 256) {
|
||||
for (word c = 0; c < 256; c++) {
|
||||
word currWord = readWord_Flash(currByte + c);
|
||||
// Swap bytes in word
|
||||
currWord = ((currWord >> 8) & 0x00FF00FF) | ((currWord & 0x00FF00FF) << 8);
|
||||
// Split word into two bytes
|
||||
// Left
|
||||
sdBuffer[d] = (( currWord >> 8 ) & 0xFF);
|
||||
@ -1118,9 +1284,6 @@ void printFlash16(int numBytes) {
|
||||
|
||||
word currWord = readWord_Flash(currByte + c);
|
||||
|
||||
// Swap bytes in word
|
||||
currWord = ((currWord >> 8) & 0x00FF00FF) | ((currWord & 0x00FF00FF) << 8);
|
||||
|
||||
// Split word into two bytes
|
||||
byte right_byte = currWord & 0xFF;
|
||||
byte left_byte = ( currWord >> 8 ) & 0xFF;
|
||||
|
||||
@ -38,7 +38,6 @@ String lastbutton = "N/A";
|
||||
// Rom base address
|
||||
unsigned long romBase = 0x10000000;
|
||||
unsigned long sramBase = 0x08000000;
|
||||
unsigned long fileSize;
|
||||
|
||||
// Flashram type
|
||||
byte flashramType = 1;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user