Commit Graph

51 Commits

Author SHA1 Message Date
sanni
6a830e651d Print first 40 bytes if flashrom is unknown 2022-01-13 17:07:58 +01:00
sanni
8a40898544 Add S29GL064M to flash.ino
Thanks to BASSIX
2021-11-27 19:46:02 +01:00
sanni
5a3b311feb Fix Led and missing word wrap 2021-10-26 17:13:42 +02:00
sanni
527f3562ed V6.4: Add ExLoRom and ExHiRom flash options
- LoRom (P0) will write up to 8MB starting from file 0x0 to flashrom 0x0.

- HiRom (P0) will write up to 4MB starting from file 0x0 to flashrom 0x0.

- ExLoRom (P1) will write the first 4MB starting from file 0x0 to flashrom 0x400000. And then a second block up to 4MB from file 0x400000 to flashrom 0x0.

- ExHiRom (P1) will write the first 4MB starting from file 0x0 to flashrom 0x400000. And then a second block up to 4MB from file 0x400000 to flashrom 0x0.
2021-06-09 11:28:39 +02:00
sanni
c343094966 Add option to force A23 to high while flashing HiROM repros
A23-> low enables P0 and A23->high enables P1 flashrom.
2021-05-12 17:42:49 +02:00
jiyunomegami
d7a133188d actually recheck DQ 7 in busyCheck29F032 2020-10-17 22:48:35 +09:00
jiyunomegami
2096ec7597 writeFlash29F032: Retry writing, for when /RESET is not connected (floating) 2020-08-14 19:03:42 +09:00
jiyunomegami
712c4cc83d busyCheck29F032 changes to match the datasheet 2020-08-14 19:02:37 +09:00
jiyunomegami
4c6fb7bd8c Detect Flash ID 04D5 MBM29F080C 2020-08-14 18:58:20 +09:00
jiyunomegami
29093b1bf3 add #ifdef enable_XXX check to each module 2020-07-05 00:07:14 +09:00
sanni
cfb9e39cbf V4.9: Improve WS Initialization
Thanks to skaman.
The code does a deeper sanity check of the header data when initializing the cart.  It avoids having to constantly press buttons to reinit the cart.  Carts can still not initialize the MBC properly but that's normal for the WonderSwan.  Clean the pins on the cart and check that the cart and adapter are seated properly.  If the cart doesn't unlock immediately, then let the sketch run for a bit.  For stubborn carts, a power cycle might be necessary.
The sketch fixes a few typos, removes some trailing spaces, and adds another ROM size (used by Benesse Pocket Challenge V2 carts).
2020-04-20 10:35:48 +02:00
sanni
7b263115a5 V4.8: Add Reset Option to sub menues 2020-04-12 11:11:10 +02:00
splash5
025ca2461c Fix wrong block address 2019-10-17 12:37:33 +08:00
splash5
6fcd374e2a Add support for AM29F400AB, E28FXXXJ3A and AM29LV033C
(E28FXXXJ3A and AM29LV033C need custom adapter)
2019-10-07 11:34:41 +08:00
sanni
34d6871f7d Set eeprom location for folder number to 0 again 2019-09-27 17:38:42 +02:00
splash5
edcbc842b3 Add support for MBM29F800BA/AM29F800BB and LH28F016SUT 2019-09-26 18:33:08 +08:00
sanni
5ff1705faa
Update FLASH.ino 2019-09-22 08:32:58 +02:00
sanni
f79c169782 V3.7: Add MX26L6420
thanks to Ice Man for testing
2019-09-07 15:57:37 +02:00
sanni
b250fffbc4 Update FLASH.ino 2019-09-07 14:13:39 +02:00
Robert Neumann
f7b61cc656 strings_to_flash: conserve ~ 800 byte SRAM by putting menu strings in progmem. Free bytes now: ~ 4000 2019-08-28 12:02:17 +02:00
Robert Neumann
c5c26110fb arduino_reset: replace the assembler jmp 0 reset method with resetArduino() that uses the watchdog timer to reset the device. This is the preferred method, as it initializes the device more correctly. 2019-08-27 21:43:48 +02:00
sanni
7f74f22ce7 V2.7: Fix flashing 29F032 Snes repro 2019-01-31 15:30:00 +01:00
sanni
a27ee157e8
V2.3: Remove 16bit flash adapter menu
If you're still using the old 16bit adapter(the one with the additional pins left and right on the snes cart edge) you can enable the menu again by changing one line in Cart_Reader.ino:  
// Enable 16bit flash adapter menu
#define enable_flash16
2018-10-30 21:08:59 +01:00
sanni
ee6d1b8f81
V1.9: Fix bug with Arduino IDE 1.8.7 2018-10-05 18:33:09 +02:00
sanni
478f9c6a27
V1.8: Disable SRAM when flashing LoROM repro
[Imgur](https://i.imgur.com/YSI1xRq.jpg)
2018-09-20 02:30:23 +02:00
sanni
b7c96ef0ed
V1.7: Add repro entries to SNES menu
These two new entries just forward the user to the flashrom functions inside of flash.ino.     
I have only tested custom-made 29F033 repros using original SHVC-1J3M-20 and SHVC-1A3M-30 PCBs as shown here: https://github.com/sanni/cartreader/wiki/Reflashing-SNES-Repros
2018-09-12 20:59:48 +02:00
sanni
b816918e70
V1.6: Add support for S29GL032M flashrom (byte mode) 2018-08-29 14:10:28 +02:00
sanni
540e698e7f
V1.5: Enable 27C322 burning code again
Needs a special eprom adapter that provides 6V VCC and 12V VPP while programming. This can be achieved with two step-ups and a transistor.
2018-08-24 16:48:35 +02:00
sanni
38aa8aad39
V1.4: Add support for MX29LV320 T/B TSOP48 2018-08-16 19:00:53 +02:00
sanni
3015b1037c
V1.3: Set byte pin to low in 8bit mode 2018-07-29 11:19:25 +02:00
sanni
40d2361855
V1.0: Change versioning to the more common #.# format 2018-05-05 20:58:49 +02:00
sanni
f8f78cc5a1
V33C: Fixed writing first 20 bytes of 27C322 eprom
Apparently the step-up converter needs a little delay before it can provide the 12V VPP.
The verify function still does not work though, I have no clue why.
2018-04-21 19:39:56 +02:00
sanni
f9c89d4666
V33B: Updated 27C322 timings
The first 10 words still do not get written though, not sure if I need something like a setup delay or if my eprom is broken.   
Too enable the eprom menu for testing 27C322 flashing change the following lines in Flash.ino:     
  // create menu with title and 3 options to choose from     
  unsigned char flashSlot;      
  // Copy menuOptions out of progmem      
  convertPgm(menuOptionsFlash, 3);      
  flashSlot = question_box("Select flashrom slot", menuOptions, 3, 0);
2018-04-21 17:14:11 +02:00
sanni
72a1a6d7c8
V33A: Accidentally left 27C322 eprom menu enabled
Eprom programming is still highly experimental and does not work 100% yet.
2018-04-21 14:23:13 +02:00
sanni
09d122369f
V32A: Add verifying ST M27C322 Eproms (beta) 2018-04-05 16:47:19 +02:00
sanni
45f67ed300
V32: Add writing ST M27C322 Eproms (beta)
Needs custom flash adapter with 12V step-up converter modul for VPP.   
5V VCC seems to work even though datasheet specifies 6.25V VCC while programming.
2018-04-04 22:20:53 +02:00
sanni
b37d95b3b5
V31: Add flashing in 16bit mode for 29LV160/320/640 flashroms 2018-04-02 20:23:31 +02:00
sanni
0ba4923699
V30H: Fix MX29L3211 flashing as 16bit in 8bit mode 2018-01-09 23:36:09 +01:00
sanni
8c6d0960fb
V30F: Fix writing MX29LV160
Reset pin needs to be connected to Reset of SNES slot.
2017-11-24 21:36:33 +01:00
sanni
0ab9f7f120
V30B: Add option to always start in a submenu
For example you can change "#define startMenu mainMenu" to "#define startMenu n64Menu" if you only need the N64 stuff.
2017-11-17 20:53:00 +01:00
sanni
e2b10ca316 V28H: Support for Fujitsu MSP55LV512 (64MB) and Intel 4400L0ZDQ0 (where the CPLD limits it to 32MB) N64 repros 2017-10-01 19:55:23 +02:00
sanni
4d5cff1393 V28E: Added some untested flashrom types for GBA and N64
I don't have them myself so I can't test but maybe others can.   
Flashrom Programmer: Macronix MX29LV320 and MX29LV640 (connected as 16bit flashrom in 8bit mode)   
GBA: Intel 4400L0ZDQ0 (Only using the first 32MB)   
N64: Fujitsu MSP55LV100S and Macronix MX29LV640 (Fujitsu might have a different sector size)
2017-09-18 23:39:54 +02:00
sanni
00f4720f76 V27D: Fixed 16bit flashrom functions for writing 29L3211 and similar
Seems like my last fix did break more than it did repair but this time everything should work.
2017-07-13 10:51:20 +02:00
sanni
e6d49feb92 V26: Flashrom Programmer Bugfixes
- It seems like flashroms in the 16bit slot like the 29L3211 were accidentally programmed byte swapped up until now and only the 8bit slot worked correctly.
- You can now program files smaller than the flashrom's size without getting a verification error 
- Added the special 29F1601 flashrom taken out of the Nintendo Power SF Memory carts
2017-06-25 03:03:15 +02:00
sanni
dddf21fc3e V24: Changed folder structure on SD card
All modules now write their roms/saves to a separate subfolder.
2017-05-08 20:42:47 +02:00
sanni
ed5dc3f573 V23A: Speed up flashing the S29GL256N N64 repro
Writing a 32MB rom should now only take 12 minutes
2017-05-03 11:54:55 +02:00
sanni
05c1965a9a Reset SA-1 cart after SRAM write 2017-01-12 00:47:38 +01:00
sanni
3825590018 V19C: Added GBA Save support for SST 39VF512 Flashrom 2016-09-21 00:04:04 +02:00
sanni
a8c03520c8 V19: Add GBA rom dumping (beta)
Seems to work fine with the Arduino running on 5V. 
Still a few read errors on 3.3V. Probably timing related.
2016-09-12 15:16:03 +02:00
sanni
3b4796e0f2 V17: Added support for 16bit flashrom slot 2016-07-10 00:20:21 +02:00