### Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader #### cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm ![image](https://dl.dropboxusercontent.com/s/b21houxm5bvdds1/cartreader.png?dl=01) #### gbaadapter.zip is an adapter for Game Boy and Game Boy Advance cartridges, PCB thickness is 1.2mm ![image](https://dl.dropboxusercontent.com/s/rnnnstkn3ynv10g/gbaadapter_pcb.png?dl=1) #### flash_adapter.zip is an adapter for 8bit and 16bit flashroms like the 29F032 or the 29L3211, PCB thickness is 1.2mm ![image](https://dl.dropboxusercontent.com/s/3oovzhcgdt3a3x9/flashadapter.png?dl=1) #### snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot ![image](https://dl.dropboxusercontent.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1) #### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough ![image](https://dl.dropboxusercontent.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1) #### gbaadapter.stl is a 3d printed case for the Game Boy (Advance) adapter pcb ![image](https://dl.dropboxusercontent.com/s/ainwnoclzzq24ez/gbaadapter.png?dl=1) #### backplate.stl is the backplate that holds the Arduino ![image](https://dl.dropboxusercontent.com/s/0qixf0n33emi1ed/backplate.png?dl=1) #### sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb ![image](https://dl.dropboxusercontent.com/s/fn6g1pm88puq8h6/sd_spacer.png?dl=1) #### sidewall.stl secures the Arduino Mega to the backplate with three M2x10 screws ![image](https://dl.dropboxusercontent.com/s/3wqdbc4p9au7dqw/sidewall.png?dl=1) #### For the needed parts list see here: https://github.com/sanni/cartreader/wiki/Needed-Parts #### How to order a PCB: https://github.com/sanni/cartreader/wiki/How-to-order-printed-circuit-boards