//****************************************** // GAME BOY ADVANCE MODULE //****************************************** #ifdef enable_GBX /****************************************** Variables *****************************************/ char calcChecksumStr[5]; boolean readType; /****************************************** Menu *****************************************/ // GBA menu items static const char GBAMenuItem1[] PROGMEM = "Read Rom"; static const char GBAMenuItem2[] PROGMEM = "Read Save"; static const char GBAMenuItem3[] PROGMEM = "Write Save"; static const char GBAMenuItem4[] PROGMEM = "Force Savetype"; static const char GBAMenuItem5[] PROGMEM = "Flash Repro"; static const char GBAMenuItem6[] PROGMEM = "Reset"; static const char* const menuOptionsGBA[] PROGMEM = {GBAMenuItem1, GBAMenuItem2, GBAMenuItem3, GBAMenuItem4, GBAMenuItem5, GBAMenuItem6}; // Rom menu static const char GBARomItem1[] PROGMEM = "1MB"; static const char GBARomItem2[] PROGMEM = "2MB"; static const char GBARomItem3[] PROGMEM = "4MB"; static const char GBARomItem4[] PROGMEM = "8MB"; static const char GBARomItem5[] PROGMEM = "16MB"; static const char GBARomItem6[] PROGMEM = "32MB"; static const char* const romOptionsGBA[] PROGMEM = {GBARomItem1, GBARomItem2, GBARomItem3, GBARomItem4, GBARomItem5, GBARomItem6}; // Save menu static const char GBASaveItem1[] PROGMEM = "4K EEPROM"; static const char GBASaveItem2[] PROGMEM = "64K EEPROM"; static const char GBASaveItem3[] PROGMEM = "256K SRAM/FRAM"; static const char GBASaveItem4[] PROGMEM = "512K SRAM/FRAM"; static const char GBASaveItem5[] PROGMEM = "512K FLASHROM"; static const char GBASaveItem6[] PROGMEM = "1M FLASHROM"; static const char* const saveOptionsGBA[] PROGMEM = {GBASaveItem1, GBASaveItem2, GBASaveItem3, GBASaveItem4, GBASaveItem5, GBASaveItem6}; void gbaMenu() { // create menu with title and 4 options to choose from unsigned char mainMenu; // Copy menuOptions out of progmem convertPgm(menuOptionsGBA, 6); mainMenu = question_box(F("GBA Cart Reader"), menuOptions, 6, 0); // wait for user choice to come back from the question box menu switch (mainMenu) { case 0: // Read rom switch (cartSize) { case 0: // create submenu with title and 4 options to choose from unsigned char GBARomMenu; // Copy menuOptions out of progmem convertPgm(romOptionsGBA, 6); GBARomMenu = question_box(F("Select ROM size"), menuOptions, 6, 0); // wait for user choice to come back from the question box menu switch (GBARomMenu) { case 0: // 1MB cartSize = 0x100000; break; case 1: // 2MB cartSize = 0x200000; break; case 2: // 4MB cartSize = 0x400000; break; case 3: // 8MB cartSize = 0x800000; break; case 4: // 16MB cartSize = 0x1000000; break; case 5: // 32MB cartSize = 0x2000000; break; } break; case 1: // 1MB cartSize = 0x100000; break; case 4: // 4MB cartSize = 0x400000; break; case 8: // 8MB cartSize = 0x800000; break; case 16: // 16MB cartSize = 0x1000000; break; case 32: // 32MB cartSize = 0x2000000; break; } display_Clear(); // Change working dir to root sd.chdir("/"); readROM_GBA(); sd.chdir("/"); // Internal Checksum compare_checksum_GBA(); // CRC32 compareCRC("gba.txt", 0, 1, 0); #ifdef global_log save_log(); #endif println_Msg(F("Press Button...")); display_Update(); wait(); break; case 1: // Read save if (saveType == 0) { // create submenu with title and 6 options to choose from unsigned char GBASaveMenu; // Copy menuOptions out of progmem convertPgm(saveOptionsGBA, 6); GBASaveMenu = question_box(F("Select save type"), menuOptions, 6, 0); // wait for user choice to come back from the question box menu switch (GBASaveMenu) { case 0: // 4K EEPROM saveType = 1; break; case 1: // 64K EEPROM saveType = 2; break; case 2: // 256K SRAM/FRAM saveType = 3; break; case 3: // 512K SRAM/FRAM saveType = 6; break; case 4: // 512K FLASH saveType = 4; break; case 5: // 1024K FLASH saveType = 5; break; } } switch (saveType) { case 1: display_Clear(); sd.chdir("/"); // 4K EEPROM readEeprom_GBA(4); setROM_GBA(); break; case 2: display_Clear(); sd.chdir("/"); // 64K EEPROM readEeprom_GBA(64); setROM_GBA(); break; case 3: display_Clear(); sd.chdir("/"); // 256K SRAM/FRAM readSRAM_GBA(1, 32768, 0); setROM_GBA(); break; case 4: display_Clear(); sd.chdir("/"); // 512K FLASH readFLASH_GBA(1, 65536, 0); setROM_GBA(); break; case 5: display_Clear(); sd.chdir("/"); // 1024K FLASH (divided into two banks) switchBank_GBA(0x0); setROM_GBA(); readFLASH_GBA(1, 65536, 0); switchBank_GBA(0x1); setROM_GBA(); readFLASH_GBA(0, 65536, 65536); setROM_GBA(); break; case 6: display_Clear(); sd.chdir("/"); // 512K SRAM/FRAM readSRAM_GBA(1, 65536, 0); setROM_GBA(); break; } println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); break; case 2: // Write save if (saveType == 0) { // create submenu with title and 6 options to choose from unsigned char GBASavesMenu; // Copy menuOptions out of progmem convertPgm(saveOptionsGBA, 6); GBASavesMenu = question_box(F("Select save type"), menuOptions, 6, 0); // wait for user choice to come back from the question box menu switch (GBASavesMenu) { case 0: // 4K EEPROM saveType = 1; break; case 1: // 64K EEPROM saveType = 2; break; case 2: // 256K SRAM/FRAM saveType = 3; break; case 3: // 512K SRAM/FRAM saveType = 6; break; case 4: // 512K FLASH saveType = 4; break; case 5: // 1024K FLASH saveType = 5; break; } } switch (saveType) { case 1: display_Clear(); sd.chdir("/"); // 4K EEPROM writeEeprom_GBA(4); writeErrors = verifyEEP_GBA(4); if (writeErrors == 0) { println_Msg(F("Verified OK")); display_Update(); } else { print_Msg(F("Error: ")); print_Msg(writeErrors); println_Msg(F(" bytes ")); print_Error(F("did not verify."), false); } setROM_GBA(); break; case 2: display_Clear(); sd.chdir("/"); // 64K EEPROM writeEeprom_GBA(64); writeErrors = verifyEEP_GBA(64); if (writeErrors == 0) { println_Msg(F("Verified OK")); display_Update(); } else { print_Msg(F("Error: ")); print_Msg(writeErrors); println_Msg(F(" bytes ")); print_Error(F("did not verify."), false); } setROM_GBA(); break; case 3: display_Clear(); // Change working dir to root sd.chdir("/"); // 256K SRAM/FRAM writeSRAM_GBA(1, 32768, 0); writeErrors = verifySRAM_GBA(32768, 0); if (writeErrors == 0) { println_Msg(F("Verified OK")); display_Update(); } else { print_Msg(F("Error: ")); print_Msg(writeErrors); println_Msg(F(" bytes ")); print_Error(F("did not verify."), false); } setROM_GBA(); break; case 4: display_Clear(); sd.chdir("/"); // 512K FLASH idFlash_GBA(); resetFLASH_GBA(); print_Msg(F("Flashrom ID: ")); println_Msg(flashid); println_Msg(F("")); println_Msg(F("Flashrom Type: ")); if (strcmp(flashid, "1F3D") == 0) { println_Msg(F("Atmel AT29LV512")); } else if (strcmp(flashid, "BFD4") == 0) { println_Msg(F("SST 39VF512")); } else if (strcmp(flashid, "C21C") == 0) { println_Msg(F("Macronix MX29L512")); } else if (strcmp(flashid, "321B") == 0) { println_Msg(F("Panasonic MN63F805MNP")); } else { println_Msg(F("Unknown")); //print_Error(F(""), true); } println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); display_Clear(); display_Update(); if (strcmp(flashid, "1F3D") == 0) { // Atmel writeFLASH_GBA(1, 65536, 0, 1); verifyFLASH_GBA(65536, 0); } else { eraseFLASH_GBA(); if (blankcheckFLASH_GBA(65536)) { writeFLASH_GBA(1, 65536, 0, 0); verifyFLASH_GBA(65536, 0); } else { print_Error(F("Erase failed"), false); } } setROM_GBA(); break; case 5: display_Clear(); sd.chdir("/"); // 1M FLASH idFlash_GBA(); resetFLASH_GBA(); print_Msg(F("Flashrom ID: ")); println_Msg(flashid); println_Msg(F("")); println_Msg(F("Flashrom Type: ")); if (strcmp(flashid, "C209") == 0) { println_Msg(F("Macronix MX29L010")); } else if (strcmp(flashid, "6213") == 0) { println_Msg(F("SANYO LE26FV10N1TS")); } else { println_Msg(F("Unknown")); //print_Error(F(""), true); } println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); display_Clear(); display_Update(); eraseFLASH_GBA(); // 131072 bytes are divided into two 65536 byte banks switchBank_GBA(0x0); setROM_GBA(); if (blankcheckFLASH_GBA(65536)) { writeFLASH_GBA(1, 65536, 0, 0); verifyFLASH_GBA(65536, 0); } else { print_Error(F("Erase failed"), false); } switchBank_GBA(0x1); setROM_GBA(); if (blankcheckFLASH_GBA(65536)) { writeFLASH_GBA(0, 65536, 65536, 0); verifyFLASH_GBA(65536, 65536); } else { print_Error(F("Erase failed"), false); } setROM_GBA(); break; case 6: display_Clear(); // Change working dir to root sd.chdir("/"); // 512K SRAM/FRAM writeSRAM_GBA(1, 65536, 0); writeErrors = verifySRAM_GBA(65536, 0); if (writeErrors == 0) { println_Msg(F("Verified OK")); display_Update(); } else { print_Msg(F("Error: ")); print_Msg(writeErrors); println_Msg(F(" bytes ")); print_Error(F("did not verify."), false); } setROM_GBA(); break; } println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); break; case 3: display_Clear(); // create submenu with title and 7 options to choose from unsigned char GBASaveMenu; // Copy menuOptions out of progmem convertPgm(saveOptionsGBA, 6); GBASaveMenu = question_box(F("Select save type"), menuOptions, 6, 0); // wait for user choice to come back from the question box menu switch (GBASaveMenu) { case 0: // 4K EEPROM saveType = 1; break; case 1: // 64K EEPROM saveType = 2; break; case 2: // 256K SRAM/FRAM saveType = 3; break; case 3: // 512K SRAM/FRAM saveType = 6; break; case 4: // 512K FLASH saveType = 4; break; case 5: // 1024K FLASH saveType = 5; break; } display_Clear(); break; case 4: display_Clear(); flashRepro_GBA(); println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); resetArduino(); break; case 5: resetArduino(); break; } } /****************************************** Setup *****************************************/ void setup_GBA() { setROM_GBA(); // Get cart info getCartInfo_GBA(); display_Clear(); // Print start page print_Msg(F("Name: ")); println_Msg(romName); print_Msg(F("Cart ID: ")); println_Msg(cartID); print_Msg(F("Rom Size: ")); if (cartSize == 0) println_Msg(F("Unknown")); else { print_Msg(cartSize); println_Msg(F("MB")); } print_Msg(F("Save: ")); switch (saveType) { case 0: println_Msg(F("Unknown")); break; case 1: println_Msg(F("4K Eeprom")); break; case 2: println_Msg(F("64K Eeprom")); break; case 3: println_Msg(F("256K Sram")); break; case 4: println_Msg(F("512K Flash")); break; case 5: println_Msg(F("1024K Flash")); break; } print_Msg(F("Checksum: ")); println_Msg(checksumStr); print_Msg(F("Version: 1.")); println_Msg(romVersion); // Wait for user input println_Msg(""); println_Msg(F("Press Button...")); display_Update(); wait(); } /****************************************** Low level functions *****************************************/ void setROM_GBA() { // CS_SRAM(PH0) DDRH |= (1 << 0); PORTH |= (1 << 0); // CS_ROM(PH3) DDRH |= (1 << 3); PORTH |= (1 << 3); // WR(PH5) DDRH |= (1 << 5); PORTH |= (1 << 5); // RD(PH6) DDRH |= (1 << 6); PORTH |= (1 << 6); // AD0-AD7 DDRF = 0xFF; // AD8-AD15 DDRK = 0xFF; // AD16-AD23 DDRC = 0xFF; // Wait delay(500); } word readWord_GBA(unsigned long myAddress) { // Set address/data ports to output DDRF = 0xFF; DDRK = 0xFF; DDRC = 0xFF; // Divide address by two to get word addressing myAddress = myAddress >> 1; // Output address to address pins, PORTF = myAddress; PORTK = myAddress >> 8; PORTC = myAddress >> 16; // Pull CS(PH3) to LOW PORTH &= ~ (1 << 3); // Set address/data ports to input PORTF = 0x0; PORTK = 0x0; DDRF = 0x0; DDRK = 0x0; // Pull RD(PH6) to LOW PORTH &= ~ (1 << 6); // Delay here or read error with repro __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"); word myWord = (PINK << 8) | PINF; // Switch RD(PH6) to HIGH PORTH |= (1 << 6); // Switch CS_ROM(PH3) to HIGH PORTH |= (1 << 3); return myWord; } void writeWord_GBA(unsigned long myAddress, word myWord) { // Set address/data ports to output DDRF = 0xFF; DDRK = 0xFF; DDRC = 0xFF; // Divide address by two to get word addressing myAddress = myAddress >> 1; // Output address to address pins, PORTF = myAddress; PORTK = myAddress >> 8; PORTC = myAddress >> 16; // Pull CS(PH3) to LOW PORTH &= ~ (1 << 3); __asm__("nop\n\t""nop\n\t"); // Output data PORTF = myWord & 0xFF; PORTK = myWord >> 8; // Pull WR(PH5) to LOW PORTH &= ~ (1 << 5); __asm__("nop\n\t""nop\n\t"); // Switch WR(PH5) to HIGH PORTH |= (1 << 5); // Switch CS_ROM(PH3) to HIGH PORTH |= (1 << 3); } // This function swaps bit at positions p1 and p2 in an integer n word swapBits(word n, word p1, word p2) { // Move p1'th to rightmost side word bit1 = (n >> p1) & 1; // Move p2'th to rightmost side word bit2 = (n >> p2) & 1; // XOR the two bits */ word x = (bit1 ^ bit2); // Put the xor bit back to their original positions x = (x << p1) | (x << p2); // XOR 'x' with the original number so that the two sets are swapped word result = n ^ x; return result; } // Some repros have D0 and D1 switched word readWord_GAB(unsigned long myAddress) { word tempWord = swapBits(readWord_GBA(myAddress), 0, 1); return tempWord; } void writeWord_GAB(unsigned long myAddress, word myWord) { writeWord_GBA(myAddress, swapBits(myWord, 0, 1)); } byte readByte_GBA(unsigned long myAddress) { // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data port to input DDRC = 0x0; // Output address to address pins, PORTF = myAddress; PORTK = myAddress >> 8; // Pull OE_SRAM(PH6) to LOW PORTH &= ~(1 << 6); // Pull CE_SRAM(PH0) to LOW PORTH &= ~(1 << 0); // Hold address for at least 25ns and wait 150ns before access __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Read byte byte tempByte = PINC; // Pull CE_SRAM(PH0) HIGH PORTH |= (1 << 0); // Pull OE_SRAM(PH6) HIGH PORTH |= (1 << 6); return tempByte; } void writeByte_GBA(unsigned long myAddress, byte myData) { // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data port to output DDRC = 0xFF; // Output address to address pins PORTF = myAddress; PORTK = myAddress >> 8; // Output data to data pins PORTC = myData; // Wait till output is stable __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Pull WE_SRAM(PH5) to LOW PORTH &= ~(1 << 5); // Pull CE_SRAM(PH0) to LOW PORTH &= ~(1 << 0); // Leave WR low for at least 60ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Pull CE_SRAM(PH0) HIGH PORTH |= (1 << 0); // Pull WE_SRAM(PH5) HIGH PORTH |= (1 << 5); // Leave WR high for at least 50ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); } /****************************************** GBA ROM Functions *****************************************/ // Read info out of rom header void getCartInfo_GBA() { char saveTypeStr[14]; // Read Header into array for (int currWord = 0; currWord < 192; currWord += 2) { word tempWord = readWord_GBA(currWord); sdBuffer[currWord] = tempWord & 0xFF; sdBuffer[currWord + 1] = (tempWord >> 8) & 0xFF; } // Compare Nintendo logo against known checksum, 156 bytes starting at 0x04 word logoChecksum = 0; for (int currByte = 0x4; currByte < 0xA0; currByte++) { logoChecksum += sdBuffer[currByte]; } if (logoChecksum != 0x4B1B) { display_Clear(); print_Error(F("CARTRIDGE ERROR"), false); strcpy(romName, "ERROR"); println_Msg(F("")); println_Msg(F("")); println_Msg(F("")); println_Msg(F("Press Button to")); println_Msg(F("ignore or powercycle")); println_Msg(F("to try again")); display_Update(); wait(); } else { char tempStr2[2]; char tempStr[5]; // cart not in list cartSize = 0; saveType = 0; // Get cart ID cartID[0] = char(sdBuffer[0xAC]); cartID[1] = char(sdBuffer[0xAD]); cartID[2] = char(sdBuffer[0xAE]); cartID[3] = char(sdBuffer[0xAF]); display_Clear(); println_Msg(F("Searching database...")); display_Update(); //go to root sd.chdir(); if (myFile.open("gba.txt", O_READ)) { char gamename[100]; // Loop through file while (myFile.available()) { // Skip first line with name skip_line(&myFile); // Skip over the CRC checksum myFile.seekSet(myFile.curPosition() + 9); // Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up sprintf(tempStr, "%c", myFile.read()); for (byte i = 0; i < 3; i++) { sprintf(tempStr2, "%c", myFile.read()); strcat(tempStr, tempStr2); } // Check if string is a match if (strcmp(tempStr, cartID) == 0) { // Rewind to start of entry for (byte count_newline = 0; count_newline < 2; count_newline++) { while (1) { if (myFile.curPosition() == 0) { break; } else if (myFile.peek() == '\n') { myFile.seekSet(myFile.curPosition() - 1); break; } else { myFile.seekSet(myFile.curPosition() - 1); } } } if (myFile.curPosition() != 0) myFile.seekSet(myFile.curPosition() + 2); // Display database while (myFile.available()) { display_Clear(); // Read game name #if defined(enable_OLED) get_line(gamename, &myFile, 42); #else get_line(gamename, &myFile, 96); #endif // Skip over the CRC checksum myFile.seekSet(myFile.curPosition() + 9); // Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up sprintf(tempStr, "%c", myFile.read()); for (byte i = 0; i < 3; i++) { sprintf(tempStr2, "%c", myFile.read()); strcat(tempStr, tempStr2); } // Skip the , in the file myFile.seekSet(myFile.curPosition() + 1); // Read the next ascii character and subtract 48 to convert to decimal cartSize = myFile.read() - 48; // Remove leading 0 for single digit cart sizes if (cartSize != 0) { cartSize = cartSize * 10 + myFile.read() - 48; } else { cartSize = myFile.read() - 48; } // Skip the , in the file myFile.seekSet(myFile.curPosition() + 1); // Read save type into string get_line(saveTypeStr, &myFile, 14); // skip third empty line skip_line(&myFile); // Print current database entry println_Msg(gamename); print_Msg(F("Cart ID: ")); println_Msg(tempStr); print_Msg(F("Rom Size: ")); print_Msg(cartSize); println_Msg(F("MB")); print_Msg(F("Save: ")); println_Msg(saveTypeStr); #if defined(enable_OLED) println_Msg(F("Press left to Change")); println_Msg(F("and right to Select")); #elif defined(enable_LCD) println_Msg(F("")); println_Msg(F("Rotate to Change")); println_Msg(F("Press to Select")); #elif defined(SERIAL_MONITOR) println_Msg(F("")); println_Msg(F("U/D to Change")); println_Msg(F("Space to Select")); #endif display_Update(); int b = 0; while (1) { // Check button input b = checkButton(); // Next if (b == 1) { // Break out of loop to read next entry break; } // Previous else if (b == 2) { for (byte count_newline = 0; count_newline < 7; count_newline++) { while (1) { if (myFile.curPosition() == 0) { break; } else if (myFile.peek() == '\n') { myFile.seekSet(myFile.curPosition() - 1); break; } else { myFile.seekSet(myFile.curPosition() - 1); } } } if (myFile.curPosition() != 0) myFile.seekSet(myFile.curPosition() + 2); break; } // Selection made else if (b == 3) { // Close file and break to exit both loops myFile.close(); break; } } } } // If no match advance and try again else { // skip rest of line skip_line(&myFile); // skip third empty line skip_line(&myFile); } } // Close the file: myFile.close(); } else { print_Error(F("GBA.txt missing"), true); } // Get name byte myByte = 0; byte myLength = 0; for (int addr = 0xA0; addr <= 0xAB; addr++) { myByte = sdBuffer[addr]; if (isprint(myByte) && myByte != '<' && myByte != '>' && myByte != ':' && myByte != '"' && myByte != '/' && myByte != '\\' && myByte != '|' && myByte != '?' && myByte != '*') { romName[myLength] = char(myByte); } else { if (romName[myLength - 1] == 0x5F) myLength--; romName[myLength] = 0x5F; } myLength++; } // Strip trailing white space for (unsigned int i = myLength - 1; i > 0; i--) { if ((romName[i] != 0x5F) && (romName[i] != 0x20)) break; romName[i] = 0x00; myLength--; } // Get ROM version romVersion = sdBuffer[0xBC]; // Get Checksum as string sprintf(checksumStr, "%02X", sdBuffer[0xBD]); // Calculate Checksum int calcChecksum = 0x00; for (int n = 0xA0; n < 0xBD; n++) { calcChecksum -= sdBuffer[n]; } calcChecksum = (calcChecksum - 0x19) & 0xFF; // Turn into string sprintf(calcChecksumStr, "%02X", calcChecksum); // Compare checksum if (strcmp(calcChecksumStr, checksumStr) != 0) { display_Clear(); print_Msg(F("Result: ")); println_Msg(calcChecksumStr); print_Error(F("Checksum Error"), false); println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); } /* Convert saveTypeStr to saveType Save types in ROM EEPROM_Vnnn EEPROM 512 bytes or 8 Kbytes (4Kbit or 64Kbit) SRAM_Vnnn SRAM 32 Kbytes (256Kbit) SRAM_F_Vnnn FRAM 32 Kbytes (256Kbit) FLASH_Vnnn FLASH 64 Kbytes (512Kbit) (ID used in older files) FLASH512_Vnnn FLASH 64 Kbytes (512Kbit) (ID used in newer files) FLASH1M_Vnnn FLASH 128 Kbytes (1Mbit) Save types in Cart Reader Code 0 = Unknown or no save 1 = 4k Eeprom 2 = 64K Eeprom 3 = 256K Sram 4 = 512K Flash 5 = 1024K Flash 6 = 512K Sram */ if (saveTypeStr[0] == 'N') { saveType = 0; } else if (saveTypeStr[0] == 'E') { // Test if 4kbit or 64kbit EEPROM // Disable interrupts for more uniform clock pulses noInterrupts(); // Fill sd Buffer readBlock_EEP(0, 64); interrupts(); delay(1000); // Enable ROM again setROM_GBA(); saveType = 1; // Reading 4kbit Eeprom as 64kbit just gives the same 8 bytes repeated for (int currByte = 0; currByte < 512 - 8; currByte++) { if (sdBuffer[currByte] != sdBuffer[currByte + 8]) { saveType = 2; break; } } } else if (saveTypeStr[0] == 'S') { saveType = 3; } else if ((saveTypeStr[0] == 'F') && (saveTypeStr[5] == '1')) { saveType = 5; } else if (saveTypeStr[0] == 'F') { saveType = 4; } } } // Dump ROM void readROM_GBA() { // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".gba"); // create a new folder for the rom file EEPROM_readAnything(0, foldern); sprintf(folder, "GBA/ROM/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); //clear the screen display_Clear(); print_Msg(F("Saving to ")); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(0, foldern); //open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("Can't create file on SD"), true); } //Initialize progress bar uint32_t processedProgressBar = 0; uint32_t totalProgressBar = (uint32_t)(cartSize); draw_progressbar(0, totalProgressBar); // Read rom for (unsigned long myAddress = 0; myAddress < cartSize; myAddress += 512) { // Blink led if (myAddress % 16384 == 0) blinkLED(); for (int currWord = 0; currWord < 512; currWord += 2) { word tempWord = readWord_GBA(myAddress + currWord); sdBuffer[currWord] = tempWord & 0xFF; sdBuffer[currWord + 1] = (tempWord >> 8) & 0xFF; } // Write to SD myFile.write(sdBuffer, 512); processedProgressBar += 512; draw_progressbar(processedProgressBar, totalProgressBar); } // Close the file: myFile.close(); } // Calculate the checksum of the dumped rom boolean compare_checksum_GBA () { print_Msg(F("Internal Checksum...")); display_Update(); strcpy(fileName, romName); strcat(fileName, ".gba"); // last used rom folder EEPROM_readAnything(0, foldern); sprintf(folder, "GBA/ROM/%s/%d", romName, foldern - 1); sd.chdir(folder); // If file exists if (myFile.open(fileName, O_READ)) { // Read rom header myFile.read(sdBuffer, 512); myFile.close(); // Calculate Checksum int calcChecksum = 0x00; for (int n = 0xA0; n < 0xBD; n++) { calcChecksum -= sdBuffer[n]; } calcChecksum = (calcChecksum - 0x19) & 0xFF; // Turn into string sprintf(calcChecksumStr, "%02X", calcChecksum); if (strcmp(calcChecksumStr, checksumStr) == 0) { println_Msg(F("OK")); display_Update(); return 1; } else { println_Msg(""); print_Msg(F("Result: ")); println_Msg(calcChecksumStr); print_Error(F("Checksum Error"), false); return 0; } } // Else show error else { print_Error(F("Failed to open rom"), false); return 0; } } /****************************************** GBA SRAM SAVE Functions *****************************************/ void readSRAM_GBA(boolean browseFile, unsigned long sramSize, uint32_t pos) { if (browseFile) { // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".srm"); // create a new folder for the save file EEPROM_readAnything(0, foldern); sprintf(folder, "GBA/SAVE/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); // Save location print_Msg(F("Saving to ")); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(0, foldern); } //open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } // Seek to a new position in the file if (pos != 0) myFile.seekCur(pos); for (unsigned long currAddress = 0; currAddress < sramSize; currAddress += 512) { for (int c = 0; c < 512; c++) { // Read byte sdBuffer[c] = readByte_GBA(currAddress + c); } // Write sdBuffer to file myFile.write(sdBuffer, 512); } // Close the file: myFile.close(); // Signal end of process println_Msg(F("Done")); display_Update(); } void writeSRAM_GBA(boolean browseFile, unsigned long sramSize, uint32_t pos) { if (browseFile) { filePath[0] = '\0'; sd.chdir("/"); fileBrowser(F("Select srm file")); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); display_Clear(); } //open file on sd card if (myFile.open(filePath, O_READ)) { // Seek to a new position in the file if (pos != 0) myFile.seekCur(pos); for (unsigned long currAddress = 0; currAddress < sramSize; currAddress += 512) { //fill sdBuffer myFile.read(sdBuffer, 512); for (int c = 0; c < 512; c++) { // Write byte writeByte_GBA(currAddress + c, sdBuffer[c]); } } // Close the file: myFile.close(); println_Msg(F("SRAM writing finished")); display_Update(); } else { print_Error(F("File doesnt exist"), false); } } unsigned long verifySRAM_GBA(unsigned long sramSize, uint32_t pos) { //open file on sd card if (myFile.open(filePath, O_READ)) { // Variable for errors writeErrors = 0; // Seek to a new position in the file if (pos != 0) myFile.seekCur(pos); for (unsigned long currAddress = 0; currAddress < sramSize; currAddress += 512) { //fill sdBuffer myFile.read(sdBuffer, 512); for (int c = 0; c < 512; c++) { // Read byte if (readByte_GBA(currAddress + c) != sdBuffer[c]) { writeErrors++; } } } // Close the file: myFile.close(); return writeErrors; } else { print_Error(F("Can't open file"), false); } } /****************************************** GBA FRAM SAVE Functions *****************************************/ // MB85R256 FRAM (Ferroelectric Random Access Memory) 32,768 words x 8 bits void readFRAM_GBA (unsigned long framSize) { // Output a HIGH signal on CS_ROM(PH3) WE_SRAM(PH5) PORTH |= (1 << 3) | (1 << 5); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data pins to input DDRC = 0x00; // Output a LOW signal on CE_SRAM(PH0) and OE_SRAM(PH6) PORTH &= ~((1 << 0) | (1 << 6)); // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".srm"); // create a new folder for the save file EEPROM_readAnything(0, foldern); sprintf(folder, "GBA/SAVE/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); // Save location print_Msg(F("Saving to ")); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(0, foldern); //open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } for (unsigned long currAddress = 0; currAddress < framSize; currAddress += 512) { for (int c = 0; c < 512; c++) { // Pull OE_SRAM(PH6) HIGH PORTH |= (1 << 6); // Set address PORTF = (currAddress + c) & 0xFF; PORTK = ((currAddress + c) >> 8) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns // Leave CS_SRAM HIGH for at least 85ns __asm__("nop\n\t""nop\n\t"); // Pull OE_SRAM(PH6) LOW PORTH &= ~ (1 << 6); // Hold address for at least 25ns and wait 150ns before access __asm__("nop\n\t""nop\n\t""nop\n\t"); // Read byte sdBuffer[c] = PINC; } // Write sdBuffer to file myFile.write(sdBuffer, 512); } // Close the file: myFile.close(); // Signal end of process println_Msg(F("Done")); display_Update(); } // Write file to SRAM void writeFRAM_GBA (boolean browseFile, unsigned long framSize) { // Output a HIGH signal on CS_ROM(PH3) and OE_SRAM(PH6) PORTH |= (1 << 3) | (1 << 6); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data port to output DDRC = 0xFF; // Output a LOW signal on CE_SRAM(PH0) and WE_SRAM(PH5) PORTH &= ~((1 << 0) | (1 << 5)); if (browseFile) { filePath[0] = '\0'; sd.chdir("/"); fileBrowser(F("Select srm file")); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); display_Clear(); } else sprintf(filePath, "%s", fileName); //open file on sd card if (myFile.open(filePath, O_READ)) { for (unsigned long currAddress = 0; currAddress < framSize; currAddress += 512) { //fill sdBuffer myFile.read(sdBuffer, 512); for (int c = 0; c < 512; c++) { // Output Data on PORTC PORTC = sdBuffer[c]; // Arduino running at 16Mhz -> one nop = 62.5ns // Data setup time 50ns __asm__("nop\n\t"); // Pull WE_SRAM (PH5) HIGH PORTH |= (1 << 5); // Set address PORTF = (currAddress + c) & 0xFF; PORTK = ((currAddress + c) >> 8) & 0xFF; // Leave WE_SRAM (PH5) HIGH for at least 85ns __asm__("nop\n\t""nop\n\t"); // Pull WE_SRAM (PH5) LOW PORTH &= ~ (1 << 5); // Hold address for at least 25ns and wait 150ns before next write __asm__("nop\n\t""nop\n\t""nop\n\t"); } } // Close the file: myFile.close(); println_Msg(F("SRAM writing finished")); display_Update(); } else { print_Error(F("File doesnt exist"), false); } } // Check if the SRAM was written without any error unsigned long verifyFRAM_GBA(unsigned long framSize) { // Output a HIGH signal on CS_ROM(PH3) WE_SRAM(PH5) PORTH |= (1 << 3) | (1 << 5); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data pins to input DDRC = 0x00; // Output a LOW signal on CE_SRAM(PH0) and OE_SRAM(PH6) PORTH &= ~((1 << 0) | (1 << 6)); //open file on sd card if (myFile.open(filePath, O_READ)) { // Variable for errors writeErrors = 0; for (unsigned long currAddress = 0; currAddress < framSize; currAddress += 512) { //fill sdBuffer myFile.read(sdBuffer, 512); for (int c = 0; c < 512; c++) { // Pull OE_SRAM(PH6) HIGH PORTH |= (1 << 6); // Set address PORTF = (currAddress + c) & 0xFF; PORTK = ((currAddress + c) >> 8) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns // Leave CS_SRAM HIGH for at least 85ns __asm__("nop\n\t""nop\n\t"); // Pull OE_SRAM(PH6) LOW PORTH &= ~ (1 << 6); // Hold address for at least 25ns and wait 150ns before access __asm__("nop\n\t""nop\n\t""nop\n\t"); // Read byte if (PINC != sdBuffer[c]) { writeErrors++; } } } // Close the file: myFile.close(); return writeErrors; } else { print_Error(F("Can't open file"), false); } } /****************************************** GBA FLASH SAVE Functions *****************************************/ // SST 39VF512 Flashrom void idFlash_GBA() { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) and OE_FLASH(PH6) PORTH |= (1 << 3) | (1 << 5) | (1 << 6); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data pins to output DDRC = 0xFF; // Output a LOW signal on CE_FLASH(PH0) PORTH &= ~(1 << 0); // ID command sequence writeByteFlash_GBA(0x5555, 0xaa); writeByteFlash_GBA(0x2aaa, 0x55); writeByteFlash_GBA(0x5555, 0x90); // Set data pins to input DDRC = 0x00; // Output a LOW signal on OE_FLASH(PH6) PORTH &= ~(1 << 6); // Wait 150ns before reading ID // Arduino running at 16Mhz -> one nop = 62.5ns __asm__("nop\n\t""nop\n\t""nop\n\t"); // Read the two id bytes into a string sprintf(flashid, "%02X%02X", readByteFlash_GBA(0), readByteFlash_GBA(1)); // Set CS_FLASH(PH0) high PORTH |= (1 << 0); } // Reset FLASH void resetFLASH_GBA() { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) and OE_FLASH(PH6) PORTH |= (1 << 3) | (1 << 5) | (1 << 6); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data pins to output DDRC = 0xFF; // Output a LOW signal on CE_FLASH(PH0) PORTH &= ~(1 << 0); // Reset command sequence writeByteFlash_GBA(0x5555, 0xAA); writeByteFlash_GBA(0x2AAA, 0x55); writeByteFlash_GBA(0x5555, 0xf0); writeByteFlash_GBA(0x5555, 0xf0); // Set CS_FLASH(PH0) high PORTH |= (1 << 0); // Wait delay(100); } byte readByteFlash_GBA(unsigned long myAddress) { // Set address PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; // Wait until byte is ready to read __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Read byte byte tempByte = PINC; // Arduino running at 16Mhz -> one nop = 62.5ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"); return tempByte; } void writeByteFlash_GBA(unsigned long myAddress, byte myData) { PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTC = myData; // Arduino running at 16Mhz -> one nop = 62.5ns // Wait till output is stable __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Switch WE_FLASH(PH5) to LOW PORTH &= ~(1 << 5); // Leave WE low for at least 40ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Switch WE_FLASH(PH5) to HIGH PORTH |= (1 << 5); // Leave WE high for a bit __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"); } // Erase FLASH void eraseFLASH_GBA() { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) and OE_FLASH(PH6) PORTH |= (1 << 3) | (1 << 5) | (1 << 6); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data pins to output DDRC = 0xFF; // Output a LOW signal on CE_FLASH(PH0) PORTH &= ~(1 << 0); // Erase command sequence writeByteFlash_GBA(0x5555, 0xaa); writeByteFlash_GBA(0x2aaa, 0x55); writeByteFlash_GBA(0x5555, 0x80); writeByteFlash_GBA(0x5555, 0xaa); writeByteFlash_GBA(0x2aaa, 0x55); writeByteFlash_GBA(0x5555, 0x10); // Set CS_FLASH(PH0) high PORTH |= (1 << 0); // Wait until all is erased delay(500); } boolean blankcheckFLASH_GBA (unsigned long flashSize) { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) PORTH |= (1 << 3) | (1 << 5); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set address to 0 PORTF = 0x00; PORTK = 0x00; // Set data pins to input DDRC = 0x00; // Disable Pullups //PORTC = 0x00; boolean blank = 1; // Output a LOW signal on CE_FLASH(PH0) PORTH &= ~(1 << 0); // Output a LOW signal on OE_FLASH(PH6) PORTH &= ~(1 << 6); for (unsigned long currAddress = 0; currAddress < flashSize; currAddress += 512) { // Fill buffer for (int c = 0; c < 512; c++) { // Read byte sdBuffer[c] = readByteFlash_GBA(currAddress + c); } // Check buffer for (unsigned long currByte = 0; currByte < 512; currByte++) { if (sdBuffer[currByte] != 0xFF) { currByte = 512; currAddress = flashSize; blank = 0; } } } // Set CS_FLASH(PH0) high PORTH |= (1 << 0); return blank; } // The MX29L010 is 131072 bytes in size and has 16 sectors per bank // each sector is 4096 bytes, there are 32 sectors total // therefore the bank size is 65536 bytes, so we have two banks in total void switchBank_GBA(byte bankNum) { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) and OE_FLASH(PH6) PORTH |= (1 << 3) | (1 << 5) | (1 << 6); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data pins to output DDRC = 0xFF; // Output a LOW signal on CE_FLASH(PH0) PORTH &= ~(1 << 0); // Switch bank command sequence writeByte_GBA(0x5555, 0xAA); writeByte_GBA(0x2AAA, 0x55); writeByte_GBA(0x5555, 0xB0); writeByte_GBA(0x0000, bankNum); // Set CS_FLASH(PH0) high PORTH |= (1 << 0); } void readFLASH_GBA (boolean browseFile, unsigned long flashSize, uint32_t pos) { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) PORTH |= (1 << 3) | (1 << 5); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set address to 0 PORTF = 0x00; PORTK = 0x00; // Set data pins to input DDRC = 0x00; if (browseFile) { // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".fla"); // create a new folder for the save file EEPROM_readAnything(0, foldern); sprintf(folder, "GBA/SAVE/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); // Save location print_Msg(F("Saving to ")); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(0, foldern); } //open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } // Seek to a new position in the file if (pos != 0) myFile.seekCur(pos); // Output a LOW signal on CE_FLASH(PH0) PORTH &= ~(1 << 0); // Output a LOW signal on OE_FLASH(PH6) PORTH &= ~(1 << 6); for (unsigned long currAddress = 0; currAddress < flashSize; currAddress += 512) { for (int c = 0; c < 512; c++) { // Read byte sdBuffer[c] = readByteFlash_GBA(currAddress + c); } // Write sdBuffer to file myFile.write(sdBuffer, 512); } myFile.close(); // Set CS_FLASH(PH0) high PORTH |= (1 << 0); // Signal end of process println_Msg(F("Done")); display_Update(); } void busyCheck_GBA(int currByte) { // Set data pins to input DDRC = 0x00; // Output a LOW signal on OE_FLASH(PH6) PORTH &= ~(1 << 6); // Read PINC while (PINC != sdBuffer[currByte]) {} // Output a HIGH signal on OE_FLASH(PH6) PORTH |= (1 << 6); // Set data pins to output DDRC = 0xFF; } void writeFLASH_GBA (boolean browseFile, unsigned long flashSize, uint32_t pos, boolean isAtmel) { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) and OE_FLASH(PH6) PORTH |= (1 << 3) | (1 << 5) | (1 << 6); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data port to output DDRC = 0xFF; if (browseFile) { filePath[0] = '\0'; sd.chdir("/"); fileBrowser(F("Select fla file")); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); display_Clear(); } print_Msg(F("Writing flash...")); display_Update(); //open file on sd card if (myFile.open(filePath, O_READ)) { // Seek to a new position in the file if (pos != 0) myFile.seekCur(pos); // Output a LOW signal on CE_FLASH(PH0) PORTH &= ~(1 << 0); if (!isAtmel) { for (unsigned long currAddress = 0; currAddress < flashSize; currAddress += 512) { //fill sdBuffer myFile.read(sdBuffer, 512); for (int c = 0; c < 512; c++) { // Write command sequence writeByteFlash_GBA(0x5555, 0xaa); writeByteFlash_GBA(0x2aaa, 0x55); writeByteFlash_GBA(0x5555, 0xa0); // Write current byte writeByteFlash_GBA(currAddress + c, sdBuffer[c]); // Wait busyCheck_GBA(c); } } } else { for (unsigned long currAddress = 0; currAddress < flashSize; currAddress += 128) { //fill sdBuffer myFile.read(sdBuffer, 128); // Write command sequence writeByteFlash_GBA(0x5555, 0xaa); writeByteFlash_GBA(0x2aaa, 0x55); writeByteFlash_GBA(0x5555, 0xa0); for (int c = 0; c < 128; c++) { writeByteFlash_GBA(currAddress + c, sdBuffer[c]); } delay(15); } } // Set CS_FLASH(PH0) high PORTH |= (1 << 0); // Close the file: myFile.close(); println_Msg(F("done")); display_Update(); } else { println_Msg(F("Error")); print_Error(F("File doesnt exist"), false); } } // Check if the Flashrom was written without any error void verifyFLASH_GBA(unsigned long flashSize, uint32_t pos) { // Output a HIGH signal on CS_ROM(PH3) WE_FLASH(PH5) PORTH |= (1 << 3) | (1 << 5); // Set address ports to output DDRF = 0xFF; DDRK = 0xFF; // Set data pins to input DDRC = 0x00; // Output a LOW signal on CE_FLASH(PH0) and OE_FLASH(PH6) PORTH &= ~((1 << 0) | (1 << 6)); // Signal beginning of process print_Msg(F("Verify...")); display_Update(); unsigned long wrError = 0; //open file on sd card if (!myFile.open(filePath, O_READ)) { print_Error(F("SD Error"), true); } // Seek to a new position in the file if (pos != 0) myFile.seekCur(pos); for (unsigned long currAddress = 0; currAddress < flashSize; currAddress += 512) { myFile.read(sdBuffer, 512); for (int c = 0; c < 512; c++) { // Read byte if (sdBuffer[c] != readByteFlash_GBA(currAddress + c)) { wrError++; } } } myFile.close(); // Set CS_FLASH(PH0) high PORTH |= (1 << 0); if (wrError == 0) { println_Msg(F("OK")); } else { print_Msg(wrError); print_Error(F(" Errors"), false); } } /****************************************** GBA Eeprom SAVE Functions *****************************************/ // Write eeprom from file void writeEeprom_GBA(word eepSize) { // Launch Filebrowser filePath[0] = '\0'; sd.chdir("/"); fileBrowser(F("Select eep file")); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); display_Clear(); print_Msg(F("Writing eeprom...")); display_Update(); //open file on sd card if (myFile.open(filePath, O_READ)) { for (word i = 0; i < eepSize * 16; i += 64) { // Fill romBuffer myFile.read(sdBuffer, 512); // Disable interrupts for more uniform clock pulses noInterrupts(); // Write 512 bytes writeBlock_EEP(i, eepSize); interrupts(); // Wait delayMicroseconds(200); } // Close the file: myFile.close(); println_Msg(F("done")); display_Update(); } else { println_Msg(F("Error")); print_Error(F("File doesnt exist"), false); } } // Read eeprom to file void readEeprom_GBA(word eepSize) { // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".eep"); // create a new folder for the save file EEPROM_readAnything(0, foldern); sprintf(folder, "GBA/SAVE/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); // Save location print_Msg(F("Saving to ")); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(0, foldern); //open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } // Each block contains 8 Bytes, so for a 8KB eeprom 1024 blocks need to be read for (word currAddress = 0; currAddress < eepSize * 16; currAddress += 64) { // Disable interrupts for more uniform clock pulses noInterrupts(); // Fill sd Buffer readBlock_EEP(currAddress, eepSize); interrupts(); // Write sdBuffer to file myFile.write(sdBuffer, 512); // Wait delayMicroseconds(200); } myFile.close(); } // Send address as bits to eeprom void send_GBA(word currAddr, word numBits) { for (word addrBit = numBits; addrBit > 0; addrBit--) { // If you want the k-th bit of n, then do // (n & ( 1 << k )) >> k if (((currAddr & ( 1 << (addrBit - 1))) >> (addrBit - 1))) { // Set A0(PF0) to High PORTF |= (1 << 0); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // Set WR(PH5) to High PORTH |= (1 << 5); } else { // Set A0(PF0) to Low PORTF &= ~ (1 << 0); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // Set WR(PH5) to High PORTH |= (1 << 5); } } } // Write 512K eeprom block void writeBlock_EEP(word startAddr, word eepSize) { // Setup // Set CS_ROM(PH3) WR(PH5) RD(PH6) to Output DDRH |= (1 << 3) | (1 << 5) | (1 << 6); // Set A0(PF0) to Output DDRF |= (1 << 0); // Set A23/D7(PC7) to Output DDRC |= (1 << 7); // Set CS_ROM(PH3) WR(PH5) RD(PH6) to High PORTH |= (1 << 3) | (1 << 5) | (1 << 6); // Set A0(PF0) to High PORTF |= (1 << 0); // Set A23/D7(PC7) to High PORTC |= (1 << 7); __asm__("nop\n\t""nop\n\t"); // Write 64*8=512 bytes for (word currAddr = startAddr; currAddr < startAddr + 64; currAddr++) { // Set CS_ROM(PH3) to LOW PORTH &= ~ (1 << 3); // Send write request "10" // Set A0(PF0) to High PORTF |= (1 << 0); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // Set WR(PH5) to High PORTH |= (1 << 5); // Set A0(PF0) to LOW PORTF &= ~ (1 << 0); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // Set WR(PH5) to High PORTH |= (1 << 5); // Send either 6 or 14 bit address if (eepSize == 4) { send_GBA(currAddr, 6); } else { send_GBA(currAddr, 14); } __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Send data for (byte currByte = 0; currByte < 8; currByte++) { send_GBA(sdBuffer[(currAddr - startAddr) * 8 + currByte], 8); } // Send stop bit // Set A0(PF0) to LOW PORTF &= ~ (1 << 0); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // WR(PH5) to High PORTH |= (1 << 5); // Set CS_ROM(PH3) to High PORTH |= (1 << 3); // Wait until done // Set A0(PF0) to Input DDRF &= ~ (1 << 0); do { // Set CS_ROM(PH3) RD(PH6) to LOW PORTH &= ~((1 << 3) | (1 << 6)); // Set CS_ROM(PH3) RD(PH6) to High PORTH |= (1 << 3) | (1 << 6); } while ((PINF & 0x1) == 0); // Set A0(PF0) to Output DDRF |= (1 << 0); } } // Reads 512 bytes from eeprom void readBlock_EEP(word startAddress, word eepSize) { // Setup // Set CS_ROM(PH3) WR(PH5) RD(PH6) to Output DDRH |= (1 << 3) | (1 << 5) | (1 << 6); // Set A0(PF0) to Output DDRF |= (1 << 0); // Set A23/D7(PC7) to Output DDRC |= (1 << 7); // Set CS_ROM(PH3) WR(PH5) RD(PH6) to High PORTH |= (1 << 3) | (1 << 5) | (1 << 6); // Set A0(PF0) to High PORTF |= (1 << 0); // Set A23/D7(PC7) to High PORTC |= (1 << 7); __asm__("nop\n\t""nop\n\t"); // Read 64*8=512 bytes for (word currAddr = startAddress; currAddr < startAddress + 64; currAddr++) { // Set CS_ROM(PH3) to LOW PORTH &= ~ (1 << 3); // Send read request "11" // Set A0(PF0) to High PORTF |= (1 << 0); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // Set WR(PH5) to High PORTH |= (1 << 5); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // Set WR(PH5) to High PORTH |= (1 << 5); // Send either 6 or 14 bit address if (eepSize == 4) { send_GBA(currAddr, 6); } else { send_GBA(currAddr, 14); } // Send stop bit // Set A0(PF0) to LOW PORTF &= ~ (1 << 0); // Set WR(PH5) to LOW PORTH &= ~ (1 << 5); // WR(PH5) to High PORTH |= (1 << 5); // Set CS_ROM(PH3) to High PORTH |= (1 << 3); __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Read data // Set A0(PF0) to Input DDRF &= ~ (1 << 0); // Set CS_ROM(PH3) to low PORTH &= ~(1 << 3); // Array that holds the bits bool tempBits[65]; // Ignore the first 4 bits for (byte i = 0; i < 4; i++) { // Set RD(PH6) to LOW PORTH &= ~ (1 << 6); // Set RD(PH6) to High PORTH |= (1 << 6); } // Read the remaining 64bits into array for (byte currBit = 0; currBit < 64; currBit++) { // Set RD(PH6) to LOW PORTH &= ~ (1 << 6); // Set RD(PH6) to High PORTH |= (1 << 6); // Read bit from A0(PF0) tempBits[currBit] = (PINF & 0x1); } // Set CS_ROM(PH3) to High PORTH |= (1 << 3); // Set A0(PF0) to High PORTF |= (1 << 0); // Set A0(PF0) to Output DDRF |= (1 << 0); // OR 8 bits into one byte for a total of 8 bytes for (byte j = 0; j < 64; j += 8) { sdBuffer[((currAddr - startAddress) * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j]; } } } // Check if the SRAM was written without any error unsigned long verifyEEP_GBA(word eepSize) { unsigned long wrError = 0; //open file on sd card if (!myFile.open(filePath, O_READ)) { print_Error(F("SD Error"), true); } // Fill sd Buffer for (word currAddress = 0; currAddress < eepSize * 16; currAddress += 64) { // Disable interrupts for more uniform clock pulses noInterrupts(); readBlock_EEP(currAddress, eepSize); interrupts(); // Compare for (int currByte = 0; currByte < 512; currByte++) { if (sdBuffer[currByte] != myFile.read()) { wrError++; } } } myFile.close(); return wrError; } /****************************************** GBA REPRO Functions (32MB Intel 4000L0YBQ0 and 16MB MX29GL128E) *****************************************/ // Reset to read mode void resetIntel_GBA(unsigned long partitionSize) { for (unsigned long currPartition = 0; currPartition < cartSize; currPartition += partitionSize) { writeWord_GBA(currPartition, 0xFFFF); } } void resetMX29GL128E_GBA() { writeWord_GAB(0, 0xF0); } boolean sectorCheckMX29GL128E_GBA() { boolean sectorProtect = 0; writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(0xAAA, 0x90); for (unsigned long currSector = 0x0; currSector < 0xFFFFFF; currSector += 0x20000) { if (readWord_GAB(currSector + 0x04) != 0x0) sectorProtect = 1; } resetMX29GL128E_GBA(); return sectorProtect; } void idFlashrom_GBA() { // Send Intel ID command to flashrom writeWord_GBA(0, 0x90); __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Read flashrom ID sprintf(flashid, "%02X%02X", ((readWord_GBA(0x2) >> 8) & 0xFF), (readWord_GBA(0x4) & 0xFF)); // Intel Strataflash if (strcmp(flashid, "8802") == 0 || (strcmp(flashid, "8816") == 0)) { cartSize = 0x2000000; } else { // Send swapped MX29GL128E/MSP55LV128 ID command to flashrom writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(0xAAA, 0x90); __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Read flashrom ID sprintf(flashid, "%02X%02X", ((readWord_GAB(0x2) >> 8) & 0xFF), (readWord_GAB(0x2) & 0xFF)); // MX29GL128E or MSP55LV128 if (strcmp(flashid, "227E") == 0) { // MX is 0xC2 and MSP is 0x4 or 0x1 romType = (readWord_GAB(0x0) & 0xFF); cartSize = 0x1000000; resetMX29GL128E_GBA(); } else { println_Msg(F("Error")); println_Msg(F("")); println_Msg(F("Unknown Flash")); print_Msg(F("Flash ID: ")); println_Msg(flashid); println_Msg(F("")); print_Error(F("Check voltage"), true); } } } boolean blankcheckFlashrom_GBA() { for (unsigned long currSector = 0; currSector < fileSize; currSector += 0x20000) { // Blink led blinkLED(); for (unsigned long currByte = 0; currByte < 0x20000; currByte += 2) { if (readWord_GBA(currSector + currByte) != 0xFFFF) { return 0; } } } return 1; } void eraseIntel4000_GBA() { // If the game is smaller than 16Mbit only erase the needed blocks unsigned long lastBlock = 0xFFFFFF; if (fileSize < 0xFFFFFF) lastBlock = fileSize; // Erase 4 blocks with 16kwords each for (unsigned long currBlock = 0x0; currBlock < 0x1FFFF; currBlock += 0x8000) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } } // Erase 126 blocks with 64kwords each for (unsigned long currBlock = 0x20000; currBlock < lastBlock; currBlock += 0x1FFFF) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } // Blink led blinkLED(); } // Erase the second chip if (fileSize > 0xFFFFFF) { // 126 blocks with 64kwords each for (unsigned long currBlock = 0x1000000; currBlock < 0x1FDFFFF; currBlock += 0x1FFFF) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } // Blink led blinkLED(); } // 4 blocks with 16kword each for (unsigned long currBlock = 0x1FE0000; currBlock < 0x1FFFFFF; currBlock += 0x8000) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } // Blink led blinkLED(); } } } void eraseIntel4400_GBA() { // If the game is smaller than 32Mbit only erase the needed blocks unsigned long lastBlock = 0x1FFFFFF; if (fileSize < 0x1FFFFFF) lastBlock = fileSize; // Erase 4 blocks with 16kwords each for (unsigned long currBlock = 0x0; currBlock < 0x1FFFF; currBlock += 0x8000) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } } // Erase 255 blocks with 64kwords each for (unsigned long currBlock = 0x20000; currBlock < lastBlock; currBlock += 0x1FFFF) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } // Blink led blinkLED(); } /* No need to erase the second chip as max rom size is 32MB if (fileSize > 0x2000000) { // 255 blocks with 64kwords each for (unsigned long currBlock = 0x2000000; currBlock < 0x3FDFFFF; currBlock += 0x1FFFF) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } // Blink led blinkLED(); } // 4 blocks with 16kword each for (unsigned long currBlock = 0x3FE0000; currBlock < 0x3FFFFFF; currBlock += 0x8000) { // Unlock Block writeWord_GBA(currBlock, 0x60); writeWord_GBA(currBlock, 0xD0); // Erase Command writeWord_GBA(currBlock, 0x20); writeWord_GBA(currBlock, 0xD0); // Read the status register word statusReg = readWord_GBA(currBlock); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock); } // Blink led blinkLED(); } }*/ } void sectorEraseMSP55LV128_GBA() { unsigned long lastSector = 0xFFFFFF; // Erase 256 sectors with 64kbytes each unsigned long currSector; for (currSector = 0x0; currSector < lastSector; currSector += 0x10000) { writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(0xAAA, 0x80); writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(currSector, 0x30); // Read the status register word statusReg = readWord_GAB(currSector); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GAB(currSector); } // Blink LED blinkLED(); } } void sectorEraseMX29GL128E_GBA() { unsigned long lastSector = 0xFFFFFF; // Erase 128 sectors with 128kbytes each unsigned long currSector; for (currSector = 0x0; currSector < lastSector; currSector += 0x20000) { writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(0xAAA, 0x80); writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(currSector, 0x30); // Read the status register word statusReg = readWord_GAB(currSector); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GAB(currSector); } // Blink LED blinkLED(); } } void writeIntel4000_GBA() { for (unsigned long currBlock = 0; currBlock < fileSize; currBlock += 0x20000) { // Blink led blinkLED(); // Write to flashrom for (unsigned long currSdBuffer = 0; currSdBuffer < 0x20000; currSdBuffer += 512) { // Fill SD buffer myFile.read(sdBuffer, 512); // Write 32 words at a time for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 64) { // Unlock Block writeWord_GBA(currBlock + currSdBuffer + currWriteBuffer, 0x60); writeWord_GBA(currBlock + currSdBuffer + currWriteBuffer, 0xD0); // Buffered program command writeWord_GBA(currBlock + currSdBuffer + currWriteBuffer, 0xE8); // Check Status register word statusReg = readWord_GBA(currBlock + currSdBuffer + currWriteBuffer); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock + currSdBuffer + currWriteBuffer); } // Write word count (minus 1) writeWord_GBA(currBlock + currSdBuffer + currWriteBuffer, 0x1F); // Write buffer for (byte currByte = 0; currByte < 64; currByte += 2) { // Join two bytes into one word word currWord = ( ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte] & 0xFF ); writeWord_GBA(currBlock + currSdBuffer + currWriteBuffer + currByte, currWord); } // Write Buffer to Flash writeWord_GBA(currBlock + currSdBuffer + currWriteBuffer + 62, 0xD0); // Read the status register at last written address statusReg = readWord_GBA(currBlock + currSdBuffer + currWriteBuffer + 62); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readWord_GBA(currBlock + currSdBuffer + currWriteBuffer + 62); } } } } } void writeMSP55LV128_GBA() { for (unsigned long currSector = 0; currSector < fileSize; currSector += 0x10000) { // Blink led blinkLED(); // Write to flashrom for (unsigned long currSdBuffer = 0; currSdBuffer < 0x10000; currSdBuffer += 512) { // Fill SD buffer myFile.read(sdBuffer, 512); // Write 16 words at a time for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 32) { // Write Buffer command writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(currSector, 0x25); // Write word count (minus 1) writeWord_GAB(currSector, 0xF); // Write buffer word currWord; for (byte currByte = 0; currByte < 32; currByte += 2) { // Join two bytes into one word currWord = ( ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte] & 0xFF ); writeWord_GBA(currSector + currSdBuffer + currWriteBuffer + currByte, currWord); } // Confirm write buffer writeWord_GAB(currSector, 0x29); // Read the status register word statusReg = readWord_GAB(currSector + currSdBuffer + currWriteBuffer + 30); while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) { statusReg = readWord_GAB(currSector + currSdBuffer + currWriteBuffer + 30); } } } } } void writeMX29GL128E_GBA() { for (unsigned long currSector = 0; currSector < fileSize; currSector += 0x20000) { // Blink led blinkLED(); // Write to flashrom for (unsigned long currSdBuffer = 0; currSdBuffer < 0x20000; currSdBuffer += 512) { // Fill SD buffer myFile.read(sdBuffer, 512); // Write 32 words at a time for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 64) { // Write Buffer command writeWord_GAB(0xAAA, 0xAA); writeWord_GAB(0x555, 0x55); writeWord_GAB(currSector, 0x25); // Write word count (minus 1) writeWord_GAB(currSector, 0x1F); // Write buffer word currWord; for (byte currByte = 0; currByte < 64; currByte += 2) { // Join two bytes into one word currWord = ( ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte] & 0xFF ); writeWord_GBA(currSector + currSdBuffer + currWriteBuffer + currByte, currWord); } // Confirm write buffer writeWord_GAB(currSector, 0x29); // Read the status register word statusReg = readWord_GAB(currSector + currSdBuffer + currWriteBuffer + 62); while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) { statusReg = readWord_GAB(currSector + currSdBuffer + currWriteBuffer + 62); } } } } } boolean verifyFlashrom_GBA() { // Open file on sd card if (myFile.open(filePath, O_READ)) { writeErrors = 0; for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) { // Blink led blinkLED(); for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) { // Fill SD buffer myFile.read(sdBuffer, 512); for (int currByte = 0; currByte < 512; currByte += 2) { // Join two bytes into one word word currWord = ( ( sdBuffer[currByte + 1] & 0xFF ) << 8 ) | ( sdBuffer[currByte] & 0xFF ); // Compare both if (readWord_GBA(currSector + currSdBuffer + currByte) != currWord) { writeErrors++; myFile.close(); return 0; } } } } // Close the file: myFile.close(); if (writeErrors == 0) { return 1; } else { return 0; } } else { print_Error(F("Can't open file"), true); return 9999; } } void flashRepro_GBA() { // Check flashrom ID's idFlashrom_GBA(); if ((strcmp(flashid, "8802") == 0) || (strcmp(flashid, "8816") == 0) || (strcmp(flashid, "227E") == 0)) { print_Msg(F("ID: ")); print_Msg(flashid); print_Msg(F(" Size: ")); print_Msg(cartSize / 0x100000); println_Msg(F("MB")); // MX29GL128E or MSP55LV128(N) if (strcmp(flashid, "227E") == 0) { // MX is 0xC2 and MSP55LV128 is 0x4 and MSP55LV128N 0x1 if (romType == 0xC2) { println_Msg(F("Macronix MX29GL128E")); } else if ((romType == 0x1) || (romType == 0x4)) { println_Msg(F("Fujitsu MSP55LV128N")); } else if ((romType == 0x89)) { println_Msg(F("Intel PC28F256M29")); } else if ((romType == 0x20)) { println_Msg(F("ST M29W128GH")); } else { print_Msg(F("romType: 0x")); println_Msg(romType, HEX); print_Error(F("Unknown manufacturer"), true); } } // Intel 4000L0YBQ0 else if (strcmp(flashid, "8802") == 0) { println_Msg(F("Intel 4000L0YBQ0")); } // Intel 4400L0ZDQ0 else if (strcmp(flashid, "8816") == 0) { println_Msg(F("Intel 4400L0ZDQ0")); } println_Msg(""); println_Msg(F("This will erase your")); println_Msg(F("Repro Cartridge.")); println_Msg(F("")); println_Msg(""); println_Msg(F("Press Button")); display_Update(); wait(); // Launch file browser filePath[0] = '\0'; sd.chdir("/"); fileBrowser(F("Select gba file")); display_Clear(); display_Update(); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); // Open file on sd card if (myFile.open(filePath, O_READ)) { // Get rom size from file fileSize = myFile.fileSize(); print_Msg(F("File size: ")); print_Msg(fileSize / 0x100000); println_Msg(F("MB")); display_Update(); // Erase needed sectors if (strcmp(flashid, "8802") == 0) { println_Msg(F("Erasing...")); display_Update(); eraseIntel4000_GBA(); resetIntel_GBA(0x200000); } else if (strcmp(flashid, "8816") == 0) { println_Msg(F("Erasing...")); display_Update(); eraseIntel4400_GBA(); resetIntel_GBA(0x200000); } else if (strcmp(flashid, "227E") == 0) { //if (sectorCheckMX29GL128E_GBA()) { //print_Error(F("Sector Protected"), true); //} //else { println_Msg(F("Erasing...")); display_Update(); if ((romType == 0xC2) || (romType == 0x89) || (romType == 0x20)) { //MX29GL128E //PC28F256M29 (0x89) sectorEraseMX29GL128E_GBA(); } else if ((romType == 0x1) || (romType == 0x4)) { //MSP55LV128(N) sectorEraseMSP55LV128_GBA(); } //} } /* Skip blankcheck to save time print_Msg(F("Blankcheck...")); display_Update(); if (blankcheckFlashrom_GBA()) { println_Msg(F("OK")); */ //Write flashrom print_Msg(F("Writing ")); println_Msg(filePath); display_Update(); if ((strcmp(flashid, "8802") == 0) || (strcmp(flashid, "8816") == 0)) { writeIntel4000_GBA(); } else if (strcmp(flashid, "227E") == 0) { if ((romType == 0xC2) || (romType == 0x89) || (romType == 0x20)) { //MX29GL128E (0xC2) //PC28F256M29 (0x89) writeMX29GL128E_GBA(); } else if ((romType == 0x1) || (romType == 0x4)) { //MSP55LV128(N) writeMSP55LV128_GBA(); } } // Close the file: myFile.close(); // Verify print_Msg(F("Verifying...")); display_Update(); if (strcmp(flashid, "8802") == 0) { // Don't know the correct size so just take some guesses resetIntel_GBA(0x8000); delay(1000); resetIntel_GBA(0x100000); delay(1000); resetIntel_GBA(0x200000); delay(1000); } else if (strcmp(flashid, "8816") == 0) { resetIntel_GBA(0x200000); delay(1000); } else if (strcmp(flashid, "227E") == 0) { resetMX29GL128E_GBA(); delay(1000); } if (verifyFlashrom_GBA() == 1) { println_Msg(F("OK")); display_Update(); } else { print_Error(F("ERROR"), true); } /* Skipped blankcheck } else { print_Error(F("failed"), true); } */ } else { print_Error(F("Can't open file"), true); } } else { println_Msg(F("Error")); println_Msg(F("")); println_Msg(F("Unknown Flash")); print_Msg(F("Flash ID: ")); println_Msg(flashid); println_Msg(F("")); print_Error(F("Check voltage"), true); } } #endif //****************************************** // End of File //******************************************