//****************************************** // SEGA MEGA DRIVE MODULE //****************************************** // Writes to Sega CD Backup RAM Cart require an extra wire from MRES (B02) to VRES (B27) /****************************************** Variables *****************************************/ unsigned long sramEnd; byte eepbit[8]; int eepSize; byte eeptemp; word addrhi; word addrlo; word chksum; //*********************************************** // EEPROM SAVE TYPES // 1 = Acclaim Type 1 [24C02] // 2 = Acclaim Type 2 [24C02/24C16/24C65] // 3 = Capcom/SEGA [24C01] // 4 = EA [24C01] // 5 = Codemasters [24C08/24C16/24C65] //*********************************************** byte eepType; //********************************************************* // SERIAL EEPROM LOOKUP TABLE // Format = {chksum, eepType | eepSize} // chksum is located in ROM at 0x18E (0xC7) // eepType and eepSize are combined to conserve memory //********************************************************* static const word PROGMEM eepid [] = { // ACCLAIM TYPE 1 0x5B9F, 0x101, // NBA Jam (J) 0x694F, 0x101, // NBA Jam (UE) (Rev 0) 0xBFA9, 0x101, // NBA Jam (UE) (Rev 1) // ACCLAIM TYPE 2 0x16B2, 0x102, // Blockbuster World Videogame Championship II (U) [NO HEADER SAVE DATA] 0xCC3F, 0x102, // NBA Jam Tournament Edition (W) (Rev 0) [NO HEADER SAVE DATA] 0x8AE1, 0x102, // NBA Jam Tournament Edition (W) (Rev 1) [NO HEADER SAVE DATA] 0xDB97, 0x102, // NBA Jam Tournament Edition 32X (W) 0x7651, 0x102, // NFL Quarterback Club (W) 0xDFE4, 0x102, // NFL Quarterback Club 32X (W) 0x3DE6, 0x802, // NFL Quarterback Club '96 (UE) 0xCB78, 0x2002, // Frank Thomas Big Hurt Baseball (UE) 0x6DD9, 0x2002, // College Slam (U) // CAPCOM 0xAD23, 0x83, // Mega Man: The Wily Wars (E) 0xEA80, 0x83, // Rockman Megaworld (J) // SEGA 0x760F, 0x83, // Evander "Real Deal" Holyfield Boxing (JU) 0x95E7, 0x83, // Greatest Heavyweights of the Ring (E) 0x0000, 0x83, // Greatest Heavyweights of the Ring (J) [BLANK CHECKSUM 0000] 0x7270, 0x83, // Greatest Heavyweights of the Ring (U) 0xBACC, 0x83, // Honoo no Toukyuuji Dodge Danpei (J) 0xB939, 0x83, // MLBPA Sports Talk Baseball (U) [BAD HEADER SAVE DATA] 0x487C, 0x83, // Ninja Burai Densetsu (J) 0x740D, 0x83, // Wonder Boy in Monster World (B) 0x0278, 0x83, // Wonder Boy in Monster World (J) 0x9D79, 0x83, // Wonder Boy in Monster World (UE) // EA 0x8512, 0x84, // Bill Walsh College Football (UE) [BAD HEADER SAVE DATA] 0xA107, 0x84, // John Madden Football '93 (UE) [NO HEADER SAVE DATA] 0x5807, 0x84, // John Madden Football '93 Championship Edition (U) [NO HEADER SAVE DATA] 0x2799, 0x84, // NHLPA Hockey '93 (UE) (Rev 0) [NO HEADER SAVE DATA] 0xFA57, 0x84, // NHLPA Hockey '93 (UE) (Rev 1) [NO HEADER SAVE DATA] 0x8B9F, 0x84, // Rings of Power (UE) [NO HEADER SAVE DATA] // CODEMASTERS 0x7E65, 0x405, // Brian Lara Cricket (E) [NO HEADER SAVE DATA] 0x9A5C, 0x2005, // Brian Lara Cricket 96 (E) (Rev 1.0) [NO HEADER SAVE DATA] 0xC4EE, 0x2005, // Brian Lara Cricket 96 (E) (Rev 1.1) [NO HEADER SAVE DATA] 0x7E50, 0x805, // Micro Machines 2 (E) (J-Cart) [NO HEADER SAVE DATA] 0x165E, 0x805, // Micro Machines '96 (E) (J-Cart) (Rev 1.0/1.1) [NO HEADER SAVE DATA] 0x168B, 0x405, // Micro Machines Military (E) (J-Cart) [NO HEADER SAVE DATA] 0x12C1, 0x2005, // Shane Warne Cricket (E) [NO HEADER SAVE DATA] }; byte eepcount = (sizeof(eepid) / sizeof(eepid[0])) / 2; byte index; word eepdata; // CD BACKUP RAM unsigned long bramSize = 0; /****************************************** Menu *****************************************/ // MD menu items static const char MDMenuItem1[] PROGMEM = "Game Cartridge"; static const char MDMenuItem2[] PROGMEM = "SegaCD RamCart"; static const char MDMenuItem3[] PROGMEM = "Flash Repro"; static const char MDMenuItem4[] PROGMEM = "Reset"; static const char* const menuOptionsMD[] PROGMEM = {MDMenuItem1, MDMenuItem2, MDMenuItem3, MDMenuItem4}; // Cart menu items static const char MDCartMenuItem1[] PROGMEM = "Read Rom"; static const char MDCartMenuItem2[] PROGMEM = "Read Sram"; static const char MDCartMenuItem3[] PROGMEM = "Write Sram"; static const char MDCartMenuItem4[] PROGMEM = "Read EEPROM"; static const char MDCartMenuItem5[] PROGMEM = "Write EEPROM"; static const char MDCartMenuItem6[] PROGMEM = "Reset"; static const char* const menuOptionsMDCart[] PROGMEM = {MDCartMenuItem1, MDCartMenuItem2, MDCartMenuItem3, MDCartMenuItem4, MDCartMenuItem5, MDCartMenuItem6}; // Sega CD Ram Backup Cartridge menu items static const char SCDMenuItem1[] PROGMEM = "Read Backup RAM"; static const char SCDMenuItem2[] PROGMEM = "Write Backup RAM"; static const char SCDMenuItem3[] PROGMEM = "Reset"; static const char* const menuOptionsSCD[] PROGMEM = {SCDMenuItem1, SCDMenuItem2, SCDMenuItem3}; // Sega start menu void mdMenu() { // create menu with title and 4 options to choose from unsigned char mdDev; // Copy menuOptions out of progmem convertPgm(menuOptionsMD, 4); mdDev = question_box(F("Select MD device"), menuOptions, 4, 0); // wait for user choice to come back from the question box menu switch (mdDev) { case 0: display_Clear(); display_Update(); setup_MD(); mode = mode_MD_Cart; break; case 1: display_Clear(); display_Update(); setup_MD(); mode = mode_SEGA_CD; break; case 2: display_Clear(); display_Update(); setup_MD(); mode = mode_MD_Cart; // Change working dir to root filePath[0] = '\0'; sd.chdir("/"); fileBrowser(F("Select file")); display_Clear(); // Setting CS(PH3) LOW PORTH &= ~(1 << 3); // ID flash resetFlash_MD(); idFlash_MD(); resetFlash_MD(); print_Msg(F("Flash ID: ")); println_Msg(flashid); if (strcmp(flashid, "C2F1") == 0) { println_Msg(F("MX29F1610 detected")); flashSize = 2097152; } else { print_Error(F("Error: Unknown flashrom"), true); } display_Update(); eraseFlash_MD(); resetFlash_MD(); blankcheck_MD(); write29F1610_MD(); resetFlash_MD(); delay(1000); resetFlash_MD(); delay(1000); verifyFlash_MD(); // Set CS(PH3) HIGH PORTH |= (1 << 3); println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); break; case 3: resetArduino(); break; } } void mdCartMenu() { // create menu with title and 6 options to choose from unsigned char mainMenu; // Copy menuOptions out of progmem convertPgm(menuOptionsMDCart, 6); mainMenu = question_box(F("MEGA DRIVE Reader"), menuOptions, 6, 0); // wait for user choice to come back from the question box menu switch (mainMenu) { case 0: display_Clear(); // Change working dir to root sd.chdir("/"); readROM_MD(); //compare_checksum_MD(); break; case 1: display_Clear(); // Does cartridge have SRAM if ((saveType == 1) || (saveType == 2) || (saveType == 3)) { // Change working dir to root sd.chdir("/"); println_Msg(F("Reading Sram...")); display_Update(); enableSram_MD(1); readSram_MD(); enableSram_MD(0); } else { print_Error(F("Cart has no Sram"), false); } break; case 2: display_Clear(); // Does cartridge have SRAM if ((saveType == 1) || (saveType == 2) || (saveType == 3)) { // Change working dir to root sd.chdir("/"); // Launch file browser fileBrowser(F("Select srm file")); display_Clear(); enableSram_MD(1); writeSram_MD(); writeErrors = verifySram_MD(); enableSram_MD(0); if (writeErrors == 0) { println_Msg(F("Sram verified OK")); display_Update(); } else { print_Msg(F("Error: ")); print_Msg(writeErrors); println_Msg(F(" bytes ")); print_Error(F("did not verify."), false); } } else { print_Error(F("Cart has no Sram"), false); } break; case 3: display_Clear(); if (saveType == 4) readEEP_MD(); else { print_Error(F("Cart has no EEPROM"), false); } break; case 4: display_Clear(); if (saveType == 4) { // Launch file browser fileBrowser(F("Select eep file")); display_Clear(); writeEEP_MD(); } else { print_Error(F("Cart has no EEPROM"), false); } break; case 5: // Reset resetArduino(); break; } println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); } void segaCDMenu() { // create menu with title and 3 options to choose from unsigned char scdMenu; // Copy menuOptions out of progmem convertPgm(menuOptionsSCD, 3); scdMenu = question_box(F("SEGA CD RAM"), menuOptions, 3, 0); // wait for user choice to come back from the question box menu switch (scdMenu) { case 0: display_Clear(); if (bramSize > 0) readBram_MD(); else { print_Error(F("Not CD Backup RAM Cart"), false); } break; case 1: display_Clear(); if (bramSize > 0) { // Launch file browser fileBrowser(F("Select brm file")); display_Clear(); writeBram_MD(); } else { print_Error(F("Not CD Backup RAM Cart"), false); } break; case 2: // Reset asm volatile (" jmp 0"); break; } println_Msg(F("")); println_Msg(F("Press Button...")); display_Update(); wait(); } /****************************************** Setup *****************************************/ void setup_MD() { // Set Address Pins to Output //A0-A7 DDRF = 0xFF; //A8-A15 DDRK = 0xFF; //A16-A23 DDRL = 0xFF; // Set Control Pins to Output RST(PH0) CLK(PH1) CS(PH3) WRH(PH4) WRL(PH5) OE(PH6) DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6); // Set TIME(PJ0) to Output DDRJ |= (1 << 0); // Set Data Pins (D0-D15) to Input DDRC = 0x00; DDRA = 0x00; // Setting RST(PH0) CLK(PH1) CS(PH3) WRH(PH4) WRL(PH5) OE(PH6) HIGH PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6); // Setting TIME(PJ0) HIGH PORTJ |= (1 << 0); delay(200); // Print all the info getCartInfo_MD(); } /****************************************** I/O Functions *****************************************/ /****************************************** Low level functions *****************************************/ void writeWord_MD(unsigned long myAddress, word myData) { PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; PORTC = myData; PORTA = (myData >> 8) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns // Wait till output is stable __asm__("nop\n\t""nop\n\t"); // Switch WR(PH5) to LOW PORTH &= ~(1 << 5); // Setting CS(PH3) LOW PORTH &= ~(1 << 3); // Leave WR low for at least 200ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Setting CS(PH3) HIGH PORTH |= (1 << 3); // Switch WR(PH5) to HIGH PORTH |= (1 << 5); // Leave WR high for at least 50ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); } word readWord_MD(unsigned long myAddress) { PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns NOP; // Setting CS(PH3) LOW PORTH &= ~(1 << 3); // Setting OE(PH6) LOW PORTH &= ~(1 << 6); // most MD ROMs are 200ns, comparable to SNES > use similar access delay of 6 x 62.5 = 375ns NOP; NOP; NOP; NOP; NOP; NOP; // Read word tempWord = ( ( PINA & 0xFF ) << 8 ) | ( PINC & 0xFF ); // Setting CS(PH3) HIGH PORTH |= (1 << 3); // Setting OE(PH6) HIGH PORTH |= (1 << 6); // these 6x nop delays have been here before, unknown what they mean NOP; NOP; NOP; NOP; NOP; NOP; return tempWord; } void writeFlash_MD(unsigned long myAddress, word myData) { PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; PORTC = myData; PORTA = (myData >> 8) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns // Wait till output is stable __asm__("nop\n\t"); // Switch WE(PH5) to LOW PORTH &= ~(1 << 5); // Leave WE low for at least 60ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Switch WE(PH5)to HIGH PORTH |= (1 << 5); // Leave WE high for at least 50ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); } word readFlash_MD(unsigned long myAddress) { PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns __asm__("nop\n\t"); // Setting OE(PH6) LOW PORTH &= ~(1 << 6); __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Read word tempWord = ( ( PINA & 0xFF ) << 8 ) | ( PINC & 0xFF ); __asm__("nop\n\t"); // Setting OE(PH6) HIGH PORTH |= (1 << 6); __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); return tempWord; } // Switch data pins to write void dataOut_MD() { DDRC = 0xFF; DDRA = 0xFF; } // Switch data pins to read void dataIn_MD() { DDRC = 0x00; DDRA = 0x00; } /****************************************** MEGA DRIVE functions *****************************************/ void getCartInfo_MD() { // Set control dataIn_MD(); cartSize = ((long(readWord_MD(0xD2)) << 16) | readWord_MD(0xD3)) + 1; // Cart Checksum chksum = readWord_MD(0xC7); // Super Street Fighter 2 Check if (cartSize == 0x400000) { switch (chksum) { case 0xCE25: // Super Street Fighter 2 (J) 40Mbit case 0xE41D: // Super Street Fighter 2 (E) 40Mbit case 0xE017: // Super Street Fighter 2 (U) 40Mbit cartSize = 0x500000; break; } } // Serial EEPROM Check for (int i = 0; i < eepcount; i++) { index = i * 2; word eepcheck = pgm_read_word(eepid + index); if (eepcheck == chksum) { eepdata = pgm_read_word(eepid + index + 1); eepType = eepdata & 0x7; eepSize = eepdata & 0xFFF8; saveType = 4; // SERIAL EEPROM break; } } // Greatest Heavyweights of the Ring (J) has blank chksum 0x0000 // Other non-save carts might have the same blank chksum // Check header for Serial EEPROM Data if (chksum == 0x0000) { if (readWord_MD(0xD9) != 0xE840) { // NOT SERIAL EEPROM eepType = 0; eepSize = 0; saveType = 0; } } // Codemasters EEPROM Check // Codemasters used the same incorrect header across multiple carts // Carts with checksum 0x165E or 0x168B could be EEPROM or non-EEPROM // Check the first DWORD in ROM (0x444E4C44) to identify the EEPROM carts if ((chksum == 0x165E) || (chksum == 0x168B)) { if (readWord_MD(0x00) != 0x444E) { // NOT SERIAL EEPROM eepType = 0; eepSize = 0; saveType = 0; } } // CD Backup RAM Cart Check // 4 = 128KB (2045 Blocks) Sega CD Backup RAM Cart // 6 = 512KB (8189 Blocks) Ultra CD Backup RAM Cart (Aftermarket) word bramCheck = readWord_MD(0x00); if (((bramCheck == 0x0004) && (chksum == 0x0004)) || ((bramCheck == 0x0006) && (chksum == 0x0006))) bramSize = pow(2, bramCheck) * 0x2000; if (saveType != 4) { // NOT SERIAL EEPROM // Check if cart has sram saveType = 0; sramSize = 0; // FIXED CODE FOR SRAM/FRAM/PARALLEL EEPROM // 0x5241F820 SRAM (ODD BYTES/EVEN BYTES) // 0x5241F840 PARALLEL EEPROM - READ AS SRAM // 0x5241E020 SRAM (BOTH BYTES) if (readWord_MD(0xD8) == 0x5241) { word sramType = readWord_MD(0xD9); if ((sramType == 0xF820) || (sramType == 0xF840)) { // SRAM/FRAM ODD/EVEN BYTES // Get sram start and end sramBase = ((long(readWord_MD(0xDA)) << 16) | readWord_MD(0xDB)); sramEnd = ((long(readWord_MD(0xDC)) << 16) | readWord_MD(0xDD)); // Check alignment of sram if ((sramBase == 0x200001) || (sramBase == 0x300001)) { // ADDED 0x300001 FOR HARDBALL '95 (U) // low byte saveType = 1; // ODD sramSize = (sramEnd - sramBase + 2) / 2; // Right shift sram base address so [A21] is set to high 0x200000 = 0b001[0]00000000000000000000 sramBase = sramBase >> 1; } else if (sramBase == 0x200000) { // high byte saveType = 2; // EVEN sramSize = (sramEnd - sramBase + 1) / 2; // Right shift sram base address so [A21] is set to high 0x200000 = 0b001[0]00000000000000000000 sramBase = sramBase / 2; } else print_Error(F("Unknown Sram Base"), true); } else if (sramType == 0xE020) { // SRAM BOTH BYTES // Get sram start and end sramBase = ((long(readWord_MD(0xDA)) << 16) | readWord_MD(0xDB)); sramEnd = ((long(readWord_MD(0xDC)) << 16) | readWord_MD(0xDD)); if (sramBase == 0x200001) { saveType = 3; // BOTH sramSize = sramEnd - sramBase + 2; sramBase = sramBase >> 1; } else if (sramBase == 0x200000) { saveType = 3; // BOTH sramSize = sramEnd - sramBase + 1; sramBase = sramBase >> 1; } else print_Error(F("Unknown Sram Base"), true); } } else { // SRAM CARTS WITH BAD/MISSING HEADER SAVE DATA switch (chksum) { case 0xC2DB: // Winter Challenge (UE) saveType = 1; // ODD sramBase = 0x200001; sramEnd = 0x200FFF; break; case 0xD7B6: // Buck Rogers: Countdown to Doomsday (UE) case 0xFE3E: // NBA Live '98 (U) case 0xFDAD: // NFL '94 starring Joe Montana (U) case 0x632E: // PGA Tour Golf (UE) (Rev 1) case 0xD2BA: // PGA Tour Golf (UE) (Rev 2) case 0x44FE: // Super Hydlide (J) saveType = 1; // ODD sramBase = 0x200001; sramEnd = 0x203FFF; break; case 0xDB5E: // Might & Magic: Gates to Another World (UE) (Rev 1) case 0x3428: // Starflight (UE) (Rev 0) case 0x43EE: // Starflight (UE) (Rev 1) saveType = 3; // BOTH sramBase = 0x200001; sramEnd = 0x207FFF; break; case 0xBF72: // College Football USA '96 (U) case 0x72EF: // FIFA Soccer '97 (UE) case 0xD723: // Hardball III (U) case 0x06C1: // Madden NFL '98 (U) case 0xDB17: // NHL '96 (UE) case 0x5B3A: // NHL '98 (U) case 0x2CF2: // NFL Sports Talk Football '93 starring Joe Montana (UE) case 0xE9B1: // Summer Challenge (U) case 0xEEE8: // Test Drive II: The Duel (U) saveType = 1; // ODD sramBase = 0x200001; sramEnd = 0x20FFFF; break; } if (saveType == 1) { sramSize = (sramEnd - sramBase + 2) / 2; sramBase = sramBase >> 1; } else if (saveType == 3) { sramSize = sramEnd - sramBase + 2; sramBase = sramBase >> 1; } } } // Get name for (byte c = 0; c < 48; c += 2) { // split word word myWord = readWord_MD((0x150 + c) / 2); byte loByte = myWord & 0xFF; byte hiByte = myWord >> 8; // write to buffer sdBuffer[c] = hiByte; sdBuffer[c + 1] = loByte; } byte myLength = 0; for (unsigned int i = 0; i < 48; i++) { if (((char(sdBuffer[i]) >= 48 && char(sdBuffer[i]) <= 57) || (char(sdBuffer[i]) >= 65 && char(sdBuffer[i]) <= 122)) && myLength < 15) { romName[myLength] = char(sdBuffer[i]); myLength++; } } display_Clear(); println_Msg(F("Cart Info")); println_Msg(F(" ")); print_Msg(F("Name: ")); println_Msg(romName); print_Msg(F("Size: ")); print_Msg(cartSize * 8 / 1024 / 1024 ); println_Msg(F(" MBit")); print_Msg(F("ChkS: ")); print_Msg((chksum >> 8), HEX); print_Msg((chksum & 0x00ff), HEX); println_Msg(F("")); if (saveType == 4) { print_Msg(F("Serial EEPROM: ")); print_Msg(eepSize * 8 / 1024); println_Msg(F(" KBit")); } else { print_Msg(F("Sram: ")); if (sramSize > 0) { print_Msg(sramSize * 8 / 1024); println_Msg(F(" KBit")); } else println_Msg(F("None")); } println_Msg(F(" ")); // Wait for user input #ifdef enable_OLED println_Msg(F("Press Button...")); display_Update(); wait(); #endif } void writeSSF2Map(unsigned long myAddress, word myData) { dataOut_MD(); // Set TIME(PJ0) HIGH PORTJ |= (1 << 0); // 0x50987E * 2 = 0xA130FD Bank 6 (0x300000-0x37FFFF) // 0x50987F * 2 = 0xA130FF Bank 7 (0x380000-0x3FFFFF) PORTL = (myAddress >> 16) & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTF = myAddress & 0xFF; PORTC = myData; PORTA = (myData >> 8) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns // Wait till output is stable __asm__("nop\n\t""nop\n\t"); // Strobe TIME(PJ0) LOW to latch the data PORTJ &= ~(1 << 0); // Switch WR(PH5) to LOW PORTH &= ~(1 << 5); // Leave WR low for at least 200ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Switch WR(PH5) to HIGH PORTH |= (1 << 5); // Set TIME(PJ0) HIGH PORTJ |= (1 << 0); dataIn_MD(); } // Read rom and save to the SD card void readROM_MD() { // Checksum uint16_t calcCKS = 0; // Set control dataIn_MD(); // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".MD"); // create a new folder EEPROM_readAnything(10, foldern); sprintf(folder, "MD/ROM/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); display_Clear(); print_Msg(F("Saving to ")); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(10, foldern); // Open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } byte buffer[1024] = { 0 }; // get current time unsigned long startTime = millis(); // Prepare SSF2 Banks if (cartSize > 0x400000) { writeSSF2Map(0x50987E, 6); // 0xA130FD writeSSF2Map(0x50987F, 7); // 0xA130FF } byte offsetSSF2Bank = 0; word d = 0; //Initialize progress bar uint32_t processedProgressBar = 0; uint32_t totalProgressBar = (uint32_t)(cartSize); draw_progressbar(0, totalProgressBar); for (unsigned long currBuffer = 0; currBuffer < cartSize / 2; currBuffer += 512) { // Blink led if (currBuffer % 16384 == 0) PORTB ^= (1 << 4); if (currBuffer == 0x200000) { writeSSF2Map(0x50987E, 8); // 0xA130FD offsetSSF2Bank = 1; } else if (currBuffer == 0x240000) { writeSSF2Map(0x50987F, 9); // 0xA130FF offsetSSF2Bank = 1; } d = 0; for (int currWord = 0; currWord < 512; currWord++) { unsigned long myAddress = currBuffer + currWord - (offsetSSF2Bank * 0x80000); PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns NOP; // Setting CS(PH3) LOW PORTH &= ~(1 << 3); // Setting OE(PH6) LOW PORTH &= ~(1 << 6); // most MD ROMs are 200ns, comparable to SNES > use similar access delay of 6 x 62.5 = 375ns NOP; NOP; NOP; NOP; NOP; NOP; // Read buffer[d] = PINA; buffer[d + 1] = PINC; // Setting CS(PH3) HIGH PORTH |= (1 << 3); // Setting OE(PH6) HIGH PORTH |= (1 << 6); // Skip first 256 words if (((currBuffer == 0) && (currWord >= 256)) || (currBuffer > 0)) { calcCKS += ((buffer[d] << 8) | buffer[d + 1]); } d += 2; } myFile.write(buffer, 1024); // update progress bar processedProgressBar += 1024; draw_progressbar(processedProgressBar, totalProgressBar); } // Close the file: myFile.close(); // Reset SSF2 Banks if (cartSize > 0x400000) { writeSSF2Map(0x50987E, 6); // 0xA130FD writeSSF2Map(0x50987F, 7); // 0xA130FF } // print elapsed time print_Msg(F("Time elapsed: ")); print_Msg((millis() - startTime) / 1000); println_Msg(F("s")); display_Update(); // print Checksum if (chksum == calcCKS) { println_Msg(F("Checksum OK")); display_Update(); } else { print_Msg(F("Checksum Error: ")); char calcsumStr[5]; sprintf(calcsumStr, "%04X", calcCKS); println_Msg(calcsumStr); print_Error(F(""), false); display_Update(); } } /****************************************** SRAM functions *****************************************/ // Sonic 3 sram enable void enableSram_MD(boolean enableSram) { dataOut_MD(); // Set D0 to either 1(enable SRAM) or 0(enable ROM) PORTC = enableSram; // Strobe TIME(PJ0) LOW to latch the data PORTJ &= ~(1 << 0); __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Set TIME(PJ0) HIGH PORTJ |= (1 << 0); __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); dataIn_MD(); } // Write sram to cartridge void writeSram_MD() { dataOut_MD(); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); println_Msg(F("Writing...")); println_Msg(filePath); display_Update(); // Open file on sd card if (myFile.open(filePath, O_READ)) { // Write to the lower byte if (saveType == 1) { for (unsigned long currByte = sramBase; currByte < sramBase + sramSize; currByte++) { writeWord_MD(currByte, (myFile.read() & 0xFF)); } } // Write to the upper byte else if (saveType == 2) { for (unsigned long currByte = sramBase; currByte < sramBase + sramSize; currByte++) { writeWord_MD(currByte, ((myFile.read() << 8 ) & 0xFF)); } } else print_Error(F("Unknown save type"), false); // Close the file: myFile.close(); println_Msg(F("Done")); display_Update(); } else { print_Error(F("SD Error"), true); } dataIn_MD(); } // Read sram and save to the SD card void readSram_MD() { dataIn_MD(); // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".srm"); // create a new folder for the save file EEPROM_readAnything(10, foldern); sprintf(folder, "MD/SAVE/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(10, foldern); // Open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } for (unsigned long currBuffer = sramBase; currBuffer < sramBase + sramSize; currBuffer += 256) { for (int currWord = 0; currWord < 256; currWord++) { word myWord = readWord_MD(currBuffer + currWord); if (saveType == 2) { // Only use the upper byte sdBuffer[currWord] = (( myWord >> 8 ) & 0xFF); } else if (saveType == 1) { // Only use the lower byte sdBuffer[currWord] = (myWord & 0xFF); } else { // saveType == 3 (BOTH) sdBuffer[currWord * 2] = (( myWord >> 8 ) & 0xFF); sdBuffer[(currWord * 2) + 1] = (myWord & 0xFF); } } if (saveType == 3) myFile.write(sdBuffer, 512); else myFile.write(sdBuffer, 256); } // Close the file: myFile.close(); print_Msg(F("Saved to ")); print_Msg(folder); println_Msg(F("/")); display_Update(); } unsigned long verifySram_MD() { dataIn_MD(); writeErrors = 0; // Open file on sd card if (myFile.open(filePath, O_READ)) { for (unsigned long currBuffer = sramBase; currBuffer < sramBase + sramSize; currBuffer += 512) { for (int currWord = 0; currWord < 512; currWord++) { word myWord = readWord_MD(currBuffer + currWord); if (saveType == 2) { // Only use the upper byte sdBuffer[currWord] = (( myWord >> 8 ) & 0xFF); } else if (saveType == 1) { // Only use the lower byte sdBuffer[currWord] = (myWord & 0xFF); } } // Check sdBuffer content against file on sd card for (int i = 0; i < 512; i++) { if (myFile.read() != sdBuffer[i]) { writeErrors++; } } } // Close the file: myFile.close(); } else { print_Error(F("SD Error"), true); } // Return 0 if verified ok, or number of errors return writeErrors; } //****************************************** // Flashrom Functions //****************************************** void resetFlash_MD() { // Set data pins to output dataOut_MD(); // Reset command sequence writeFlash_MD(0x5555, 0xaa); writeFlash_MD(0x2aaa, 0x55); writeFlash_MD(0x5555, 0xf0); // Set data pins to input again dataIn_MD(); } void write29F1610_MD() { // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); print_Msg(F("Flashing file ")); print_Msg(filePath); println_Msg(F("...")); display_Update(); // Open file on sd card if (myFile.open(filePath, O_READ)) { // Get rom size from file fileSize = myFile.fileSize(); if (fileSize > flashSize) { print_Error(F("File size exceeds flash size."), true); } // Set data pins to output dataOut_MD(); // Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written int d = 0; for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) { myFile.read(sdBuffer, 128); // Blink led if (currByte % 4096 == 0) { PORTB ^= (1 << 4); } // Write command sequence writeFlash_MD(0x5555, 0xaa); writeFlash_MD(0x2aaa, 0x55); writeFlash_MD(0x5555, 0xa0); // Write one full page at a time for (byte c = 0; c < 64; c++) { word currWord = ( ( sdBuffer[d] & 0xFF ) << 8 ) | ( sdBuffer[d + 1] & 0xFF ); writeFlash_MD(currByte + c, currWord); d += 2; } d = 0; // Check if write is complete delayMicroseconds(100); busyCheck_MD(); } // Set data pins to input again dataIn_MD(); // Close the file: myFile.close(); } else { println_Msg(F("Can't open file")); display_Update(); } } void idFlash_MD() { // Set data pins to output dataOut_MD(); // ID command sequence writeFlash_MD(0x5555, 0xaa); writeFlash_MD(0x2aaa, 0x55); writeFlash_MD(0x5555, 0x90); // Set data pins to input again dataIn_MD(); // Read the two id bytes into a string sprintf(flashid, "%02X%02X", readFlash_MD(0) & 0xFF, readFlash_MD(1) & 0xFF); } byte readStatusReg_MD() { // Set data pins to output dataOut_MD(); // Status reg command sequence writeFlash_MD(0x5555, 0xaa); writeFlash_MD(0x2aaa, 0x55); writeFlash_MD(0x5555, 0x70); // Set data pins to input again dataIn_MD(); // Read the status register byte statusReg = readFlash_MD(0); return statusReg; } void eraseFlash_MD() { // Set data pins to output dataOut_MD(); // Erase command sequence writeFlash_MD(0x5555, 0xaa); writeFlash_MD(0x2aaa, 0x55); writeFlash_MD(0x5555, 0x80); writeFlash_MD(0x5555, 0xaa); writeFlash_MD(0x2aaa, 0x55); writeFlash_MD(0x5555, 0x10); // Set data pins to input again dataIn_MD(); busyCheck_MD(); } void blankcheck_MD() { blank = 1; for (unsigned long currByte = 0; currByte < flashSize / 2; currByte++) { if (readFlash_MD(currByte) != 0xFFFF) { currByte = flashSize / 2; blank = 0; } if (currByte % 4096 == 0) { PORTB ^= (1 << 4); } } if (!blank) { print_Error(F("Error: Not blank"), false); } } void verifyFlash_MD() { // Open file on sd card if (myFile.open(filePath, O_READ)) { // Get rom size from file fileSize = myFile.fileSize(); if (fileSize > flashSize) { print_Error(F("File size exceeds flash size."), true); } blank = 0; word d = 0; for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 256) { if (currByte % 4096 == 0) { PORTB ^= (1 << 4); } //fill sdBuffer myFile.read(sdBuffer, 512); for (int c = 0; c < 256; c++) { word currWord = ((sdBuffer[d] << 8) | sdBuffer[d + 1]); if (readFlash_MD(currByte + c) != currWord) { blank++; } d += 2; } d = 0; } if (blank == 0) { println_Msg(F("Flashrom verified OK")); display_Update(); } else { print_Msg(F("Error: ")); print_Msg(blank); println_Msg(F(" bytes ")); print_Error(F("did not verify."), false); } // Close the file: myFile.close(); } else { println_Msg(F("Can't open file")); display_Update(); } } // Delay between write operations based on status register void busyCheck_MD() { // Set data pins to input dataIn_MD(); // Read the status register word statusReg = readFlash_MD(0); while ((statusReg | 0xFF7F) != 0xFFFF) { statusReg = readFlash_MD(0); } // Set data pins to output dataOut_MD(); } //****************************************** // EEPROM Functions //****************************************** void EepromInit(byte eepmode) { // Acclaim Type 2 PORTF = 0x00; // ADDR A0-A7 PORTK = 0x00; // ADDR A8-A15 PORTL = 0x10; // ADDR A16-A23 PORTA = 0x00; // DATA D8-D15 PORTH |= (1 << 0); // /RES HIGH PORTC = eepmode; // EEPROM Switch: 0 = Enable (Read EEPROM), 1 = Disable (Read ROM) PORTH &= ~(1 << 3); // CE LOW PORTH &= ~(1 << 4) & ~(1 << 5); // /UDSW + /LDSW LOW PORTH |= (1 << 6); // OE HIGH __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); PORTH |= (1 << 4) | (1 << 5); // /UDSW + /LDSW HIGH __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); } void writeWord_SDA(unsigned long myAddress, word myData) { /* D0 goes to /SDA when only /LWR is asserted */ PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; PORTC = myData; PORTH &= ~(1 << 3); // CE LOW PORTH &= ~(1 << 5); // /LDSW LOW PORTH |= (1 << 4); // /UDSW HIGH PORTH |= (1 << 6); // OE HIGH if (eepSize > 0x100) __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); else delayMicroseconds(100); PORTH |= (1 << 5); // /LDSW HIGH if (eepSize > 0x100) __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); else delayMicroseconds(100); } void writeWord_SCL(unsigned long myAddress, word myData) { /* D0 goes to /SCL when only /UWR is asserted */ PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; PORTC = myData; PORTH &= ~(1 << 3); // CE LOW PORTH &= ~(1 << 4); // /UDSW LOW PORTH |= (1 << 5); // /LDSW HIGH PORTH |= (1 << 6); // OE HIGH if (eepSize > 0x100) __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); else delayMicroseconds(100); PORTH |= (1 << 4); // /UDSW HIGH if (eepSize > 0x100) __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); else delayMicroseconds(100); } void writeWord_CM(unsigned long myAddress, word myData) { // Codemasters PORTF = myAddress & 0xFF; PORTK = (myAddress >> 8) & 0xFF; PORTL = (myAddress >> 16) & 0xFF; PORTC = myData; PORTA = (myData >> 8) & 0xFF; // Arduino running at 16Mhz -> one nop = 62.5ns // Wait till output is stable __asm__("nop\n\t""nop\n\t"); // Switch WR(PH4) to LOW PORTH &= ~(1 << 4); // Setting CS(PH3) LOW PORTH &= ~(1 << 3); // Pulse CLK(PH1) PORTH ^= (1 << 1); // Leave WR low for at least 200ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); // Pulse CLK(PH1) PORTH ^= (1 << 1); // Setting CS(PH3) HIGH PORTH |= (1 << 3); // Switch WR(PH4) to HIGH PORTH |= (1 << 4); // Leave WR high for at least 50ns __asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t"); } // EEPROM COMMANDS void EepromStart() { if (eepType == 2) { // Acclaim Type 2 writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x00); // scl low writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x01); // scl high writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x00); // scl low } else if (eepType == 4) { // EA writeWord_MD(0x100000, 0x00); // sda low, scl low writeWord_MD(0x100000, 0xC0); // sda, scl high writeWord_MD(0x100000, 0x40); // sda low, scl high writeWord_MD(0x100000, 0x00); // START } else if (eepType == 5) { // Codemasters writeWord_CM(0x180000, 0x00); // sda low, scl low writeWord_CM(0x180000, 0x02); // sda low, scl high writeWord_CM(0x180000, 0x03); // sda, scl high writeWord_CM(0x180000, 0x02); // sda low, scl high writeWord_CM(0x180000, 0x00); // START } else { writeWord_MD(0x100000, 0x00); // sda low, scl low writeWord_MD(0x100000, 0x03); // sda, scl high writeWord_MD(0x100000, 0x02); // sda low, scl high writeWord_MD(0x100000, 0x00); // START } } void EepromSet0() { if (eepType == 2) { // Acclaim Type 2 writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x01); // scl high writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x00); // scl low } else if (eepType == 4) { // EA writeWord_MD(0x100000, 0x00); // sda low, scl low writeWord_MD(0x100000, 0x40); // sda low, scl high // 0 writeWord_MD(0x100000, 0x00); // sda low, scl low } else if (eepType == 5) { // Codemasters writeWord_CM(0x180000, 0x00); // sda low, scl low writeWord_CM(0x180000, 0x02); // sda low, scl high // 0 writeWord_CM(0x180000, 0x00); // sda low, scl low } else { writeWord_MD(0x100000, 0x00); // sda low, scl low writeWord_MD(0x100000, 0x02); // sda low, scl high // 0 writeWord_MD(0x100000, 0x00); // sda low, scl low } } void EepromSet1() { if (eepType == 2) { // Acclaim Type 2 writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x01); // scl high writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x00); // scl low } else if (eepType == 4) { // EA writeWord_MD(0x100000, 0x80); // sda high, scl low writeWord_MD(0x100000, 0xC0); // sda high, scl high // 1 writeWord_MD(0x100000, 0x80); // sda high, scl low writeWord_MD(0x100000, 0x00); // sda low, scl low } else if (eepType == 5) { // Codemasters writeWord_CM(0x180000, 0x01); // sda high, scl low writeWord_CM(0x180000, 0x03); // sda high, scl high // 1 writeWord_CM(0x180000, 0x01); // sda high, scl low writeWord_CM(0x180000, 0x00); // sda low, scl low } else { writeWord_MD(0x100000, 0x01); // sda high, scl low writeWord_MD(0x100000, 0x03); // sda high, scl high // 1 writeWord_MD(0x100000, 0x01); // sda high, scl low writeWord_MD(0x100000, 0x00); // sda low, scl low } } void EepromDevice() { // 24C02+ EepromSet1(); EepromSet0(); EepromSet1(); EepromSet0(); } void EepromSetDeviceAddress(word addrhi) { // 24C02+ for (int i = 0; i < 3; i++) { if ((addrhi >> 2) & 0x1) // Bit is HIGH EepromSet1(); else // Bit is LOW EepromSet0(); addrhi <<= 1; // rotate to the next bit } } void EepromStatus() { // ACK byte eepStatus = 1; if (eepType == 1) { // Acclaim Type 1 writeWord_MD(0x100000, 0x01); // sda high, scl low writeWord_MD(0x100000, 0x03); // sda high, scl high do { dataIn_MD(); eepStatus = ((readWord_MD(0x100000) >> 1) & 0x1); dataOut_MD(); delayMicroseconds(4); } while (eepStatus == 1); writeWord_MD(0x100000, 0x01); // sda high, scl low } else if (eepType == 2) { // Acclaim Type 2 writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x01); // scl high do { dataIn_MD(); eepStatus = (readWord_MD(0x100000) & 0x1); dataOut_MD(); delayMicroseconds(4); } while (eepStatus == 1); writeWord_SCL(0x100000, 0x00); // scl low } else if (eepType == 3) { // Capcom/Sega writeWord_MD(0x100000, 0x01); // sda high, scl low writeWord_MD(0x100000, 0x03); // sda high, scl high do { dataIn_MD(); eepStatus = (readWord_MD(0x100000) & 0x1); dataOut_MD(); delayMicroseconds(4); } while (eepStatus == 1); writeWord_MD(0x100000, 0x01); // sda high, scl low } else if (eepType == 4) { // EA writeWord_MD(0x100000, 0x80); // sda high, scl low writeWord_MD(0x100000, 0xC0); // sda high, scl high do { dataIn_MD(); eepStatus = ((readWord_MD(0x100000) >> 7) & 0x1); dataOut_MD(); delayMicroseconds(4); } while (eepStatus == 1); writeWord_MD(0x100000, 0x80); // sda high, scl low } else if (eepType == 5) { // Codemasters writeWord_CM(0x180000, 0x01); // sda high, scl low writeWord_CM(0x180000, 0x03); // sda high, scl high do { dataIn_MD(); eepStatus = ((readWord_MD(0x1C0000) >> 7) & 0x1); dataOut_MD(); delayMicroseconds(4); } while (eepStatus == 1); writeWord_CM(0x180000, 0x01); // sda high, scl low } } void EepromReadMode() { EepromSet1(); // READ EepromStatus(); // ACK } void EepromWriteMode() { EepromSet0(); // WRITE EepromStatus(); // ACK } void EepromReadData() { if (eepType == 1) { // Acclaim Type 1 for (int i = 0; i < 8; i++) { writeWord_MD(0x100000, 0x03); // sda high, scl high dataIn_MD(); eepbit[i] = ((readWord_MD(0x100000) >> 1) & 0x1); // Read 0x100000 with Mask 0x1 (bit 1) dataOut_MD(); writeWord_MD(0x100000, 0x01); // sda high, scl low } } else if (eepType == 2) { // Acclaim Type 2 for (int i = 0; i < 8; i++) { writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x01); // scl high dataIn_MD(); eepbit[i] = (readWord_MD(0x100000) & 0x1); // Read 0x100000 with Mask 0x1 (bit 0) dataOut_MD(); writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x00); // scl low } } else if (eepType == 3) { // Capcom/Sega for (int i = 0; i < 8; i++) { writeWord_MD(0x100000, 0x03); // sda high, scl high dataIn_MD(); eepbit[i] = (readWord_MD(0x100000) & 0x1); // Read 0x100000 with Mask 0x1 (bit 0) dataOut_MD(); writeWord_MD(0x100000, 0x01); // sda high, scl low } } else if (eepType == 4) { // EA for (int i = 0; i < 8; i++) { writeWord_MD(0x100000, 0xC0); // sda high, scl high dataIn_MD(); eepbit[i] = ((readWord_MD(0x100000) >> 7) & 0x1); // Read 0x100000 with Mask (bit 7) dataOut_MD(); writeWord_MD(0x100000, 0x80); // sda high, scl low } } else if (eepType == 5) { // Codemasters for (int i = 0; i < 8; i++) { writeWord_CM(0x180000, 0x03); // sda high, scl high dataIn_MD(); eepbit[i] = ((readWord_MD(0x1C0000) >> 7) & 0x1); // Read 0x1C0000 with Mask 0x1 (bit 7) dataOut_MD(); writeWord_CM(0x180000, 0x01); // sda high, scl low } } } void EepromWriteData(byte data) { for (int i = 0; i < 8; i++) { if ((data >> 7) & 0x1) // Bit is HIGH EepromSet1(); else // Bit is LOW EepromSet0(); data <<= 1; // rotate to the next bit } EepromStatus(); // ACK } void EepromFinish() { if (eepType == 2) { // Acclaim Type 2 writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x00); // scl low writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x00); // scl low writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x01); // scl high writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x00); // scl low writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x00); // scl low } else if (eepType == 4) { // EA writeWord_MD(0x100000, 0x00); // sda low, scl low writeWord_MD(0x100000, 0x80); // sda high, scl low writeWord_MD(0x100000, 0xC0); // sda high, scl high writeWord_MD(0x100000, 0x80); // sda high, scl low writeWord_MD(0x100000, 0x00); // sda low, scl low } else if (eepType == 5) { // Codemasters writeWord_CM(0x180000, 0x00); // sda low, scl low writeWord_CM(0x180000, 0x01); // sda high, scl low writeWord_CM(0x180000, 0x03); // sda high, scl high writeWord_CM(0x180000, 0x01); // sda high, scl low writeWord_CM(0x180000, 0x00); // sda low, scl low } else { writeWord_MD(0x100000, 0x00); // sda low, scl low writeWord_MD(0x100000, 0x01); // sda high, scl low writeWord_MD(0x100000, 0x03); // sda high, scl high writeWord_MD(0x100000, 0x01); // sda high, scl low writeWord_MD(0x100000, 0x00); // sda low, scl low } } void EepromStop() { if (eepType == 2) { // Acclaim Type 2 writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x01); // scl high writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x01); // scl high writeWord_SDA(0x100000, 0x01); // sda high writeWord_SCL(0x100000, 0x00); // scl low writeWord_SDA(0x100000, 0x00); // sda low writeWord_SCL(0x100000, 0x00); // scl low // STOP } else if (eepType == 4) { // EA writeWord_MD(0x100000, 0x00); // sda, scl low writeWord_MD(0x100000, 0x40); // sda low, scl high writeWord_MD(0x100000, 0xC0); // sda, scl high writeWord_MD(0x100000, 0x80); // sda high, scl low writeWord_MD(0x100000, 0x00); // STOP } else if (eepType == 5) { // Codemasters writeWord_CM(0x180000, 0x00); // sda low, scl low writeWord_CM(0x180000, 0x02); // sda low, scl high writeWord_CM(0x180000, 0x03); // sda, scl high writeWord_CM(0x180000, 0x01); // sda high, scl low writeWord_CM(0x180000, 0x00); // STOP } else { writeWord_MD(0x100000, 0x00); // sda, scl low writeWord_MD(0x100000, 0x02); // sda low, scl high writeWord_MD(0x100000, 0x03); // sda, scl high writeWord_MD(0x100000, 0x01); // sda high, scl low writeWord_MD(0x100000, 0x00); // STOP } } void EepromSetAddress(word address) { if (eepSize > 0x80) { // 24C02+ for (int i = 0; i < 8; i++) { if ((address >> 7) & 0x1) // Bit is HIGH EepromSet1(); else // Bit is LOW EepromSet0(); address <<= 1; // rotate to the next bit } EepromStatus(); // ACK } else { // 24C01 for (int i = 0; i < 7; i++) { if ((address >> 6) & 0x1) // Bit is HIGH EepromSet1(); else // Bit is LOW EepromSet0(); address <<= 1; // rotate to the next bit } } } void readEepromByte(word address) { addrhi = address >> 8; addrlo = address & 0xFF; dataOut_MD(); if (eepType == 2) EepromInit(0); // Enable EEPROM EepromStart(); // START if (eepSize > 0x80) { EepromDevice(); // DEVICE [1010] if (eepSize > 0x800) { // MODE 3 [24C65] EepromSetDeviceAddress(0); EepromWriteMode(); EepromSetAddress(addrhi); // ADDR [A15..A8] } else { // MODE 2 [24C02/24C08/24C16] EepromSetDeviceAddress(addrhi); // ADDR [A10..A8] EepromWriteMode(); } } EepromSetAddress(addrlo); if (eepSize > 0x80) { EepromStart(); // START EepromDevice(); // DEVICE [1010] if (eepSize > 0x800) // MODE 3 [24C65] EepromSetDeviceAddress(0); else // MODE 2 [24C02/24C08/24C16] EepromSetDeviceAddress(addrhi); // ADDR [A10..A8] } EepromReadMode(); EepromReadData(); EepromFinish(); EepromStop(); // STOP if (eepType == 2) EepromInit(1); // Disable EEPROM // OR 8 bits into byte eeptemp = eepbit[0] << 7 | eepbit[1] << 6 | eepbit[2] << 5 | eepbit[3] << 4 | eepbit[4] << 3 | eepbit[5] << 2 | eepbit[6] << 1 | eepbit[7]; sdBuffer[addrlo] = eeptemp; } void writeEepromByte(word address) { addrhi = address >> 8; addrlo = address & 0xFF; eeptemp = sdBuffer[addrlo]; dataOut_MD(); if (eepType == 2) EepromInit(0); // Enable EEPROM EepromStart(); // START if (eepSize > 0x80) { EepromDevice(); // DEVICE [1010] if (eepSize > 0x800) { // MODE 3 [24C65] EepromSetDeviceAddress(0); // [A2-A0] = 000 EepromWriteMode(); // WRITE EepromSetAddress(addrhi); // ADDR [A15-A8] } else { // MODE 2 [24C02/24C08/24C16] EepromSetDeviceAddress(addrhi); // ADDR [A10-A8] EepromWriteMode(); // WRITE } EepromSetAddress(addrlo); } else { // 24C01 EepromSetAddress(addrlo); EepromWriteMode(); // WRITE } EepromWriteData(eeptemp); EepromStop(); // STOP if (eepType == 2) EepromInit(1); // Disable EEPROM } // Read EEPROM and save to the SD card void readEEP_MD() { dataIn_MD(); // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".eep"); // create a new folder for the save file EEPROM_readAnything(10, foldern); sd.chdir(); sprintf(folder, "MD/SAVE/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(10, foldern); println_Msg(F("Reading...")); display_Update(); // Open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } if (eepSize > 0x100) { // 24C04+ for (word currByte = 0; currByte < eepSize; currByte += 256) { print_Msg(F("*")); display_Update(); for (int i = 0; i < 256; i++) { readEepromByte(currByte + i); } myFile.write(sdBuffer, 256); } } else { // 24C01/24C02 for (word currByte = 0; currByte < eepSize; currByte++) { if ((currByte != 0) && ((currByte + 1) % 16 == 0)) { print_Msg(F("*")); display_Update(); } readEepromByte(currByte); } myFile.write(sdBuffer, eepSize); } // Close the file: myFile.close(); println_Msg(F("")); display_Clear(); print_Msg(F("Saved to ")); print_Msg(folder); display_Update(); } void writeEEP_MD() { dataOut_MD(); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); println_Msg(F("Writing...")); println_Msg(filePath); display_Update(); // Open file on sd card if (myFile.open(filePath, O_READ)) { if (eepSize > 0x100) { // 24C04+ for (word currByte = 0; currByte < eepSize; currByte += 256) { myFile.read(sdBuffer, 256); for (int i = 0; i < 256; i++) { writeEepromByte(currByte + i); delay(50); // DELAY NEEDED } print_Msg(F(".")); display_Update(); } } else { // 24C01/24C02 myFile.read(sdBuffer, eepSize); for (word currByte = 0; currByte < eepSize; currByte++) { writeEepromByte(currByte); print_Msg(F(".")); if ((currByte != 0) && ((currByte + 1) % 64 == 0)) println_Msg(F("")); display_Update(); // ON SERIAL = delay(100) } } // Close the file: myFile.close(); println_Msg(F("")); display_Clear(); println_Msg(F("Done")); display_Update(); } else { print_Error(F("SD Error"), true); } dataIn_MD(); } //****************************************** // CD Backup RAM Functions //****************************************** void readBram_MD() { dataIn_MD(); // Get name, add extension and convert to char array for sd lib strcpy(fileName, "Cart.brm"); // create a new folder for the save file EEPROM_readAnything(10, foldern); sd.chdir(); sprintf(folder, "MD/RAM/%d", foldern); sd.mkdir(folder, true); sd.chdir(folder); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(10, foldern); println_Msg(F("Reading...")); display_Update(); // Open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_Error(F("SD Error"), true); } for (unsigned long currByte = 0; currByte < bramSize; currByte += 512) { for (int i = 0; i < 512; i++) { sdBuffer[i] = readWord_MD(0x300000 + currByte + i); } myFile.write(sdBuffer, 512); } // Close the file: myFile.close(); println_Msg(F("")); display_Clear(); print_Msg(F("Saved to ")); print_Msg(folder); display_Update(); } void writeBram_MD() { dataOut_MD(); // Create filepath sprintf(filePath, "%s/%s", filePath, fileName); println_Msg(F("Writing...")); println_Msg(filePath); display_Update(); // Open file on sd card if (myFile.open(filePath, O_READ)) { // 0x700000-0x7FFFFF: Writes by /LWR latch D0; 1=RAM write enabled, 0=disabled writeWord_MD(0x380000, 1); // Enable BRAM Writes for (unsigned long currByte = 0; currByte < bramSize; currByte += 512) { myFile.read(sdBuffer, 512); for (int i = 0; i < 512; i++) { writeWord_MD(0x300000 + currByte + i, sdBuffer[i]); } } writeWord_MD(0x380000, 0); // Disable BRAM Writes // Close the file: myFile.close(); println_Msg(F("")); display_Clear(); println_Msg(F("Done")); display_Update(); } else { print_Error(F("SD Error"), true); } dataIn_MD(); } //****************************************** // End of File //******************************************