### Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader   

#### cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm  

![image](https://dl.dropboxusercontent.com/s/b21houxm5bvdds1/cartreader.png?dl=01)    

#### gbaadapter.zip is an adapter for Game Boy and Game Boy Advance cartridges, PCB thickness is 1.2mm 

![image](https://dl.dropboxusercontent.com/s/rnnnstkn3ynv10g/gbaadapter_pcb.png?dl=1)    

#### flash_adapter.zip is an adapter for 8bit and 16bit(in 8bit mode) flashroms like the 29F032, 29L3211 or 29LV160, PCB thickness is 1.2mm 
   
![image](https://dl.dropboxusercontent.com/s/jk2xmjy5bp4jfms/flash_adapter.png?dl=1)    

#### md_adapter.zip is an adapter for SEGA Mega Drive/Genesis carts, PCB thickness is 1.2mm 
   
![image](https://dl.dropboxusercontent.com/s/li0kb0v3m98bqd2/md_adapter_pcb.png?dl=1)   
   
#### snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot   

![image](https://dl.dropboxusercontent.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1)   

#### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough     

![image](https://dl.dropboxusercontent.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1)   

#### gbaadapter.stl is a 3d printed case for the Game Boy (Advance) adapter pcb      

![image](https://dl.dropboxusercontent.com/s/ainwnoclzzq24ez/gbaadapter.png?dl=1)   

#### backplate.stl is the backplate that holds the Arduino    

![image](https://dl.dropboxusercontent.com/s/0qixf0n33emi1ed/backplate.png?dl=1)    

#### sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb    

![image](https://dl.dropboxusercontent.com/s/fn6g1pm88puq8h6/sd_spacer.png?dl=1)  

#### sidewall.stl secures the Arduino Mega to the backplate with three M2x10 screws    

![image](https://dl.dropboxusercontent.com/s/3wqdbc4p9au7dqw/sidewall.png?dl=1)  

#### TSOP40_to_DIP36 is a small adapter pcb that can be used to make homebrew SNES games with the 29F032 family of flashroms   

![image](https://dl.dropboxusercontent.com/s/lfyts5puzsub1be/TSOP40_to_DIP36.gif?dl=1)  

#### For the needed parts list see here: https://github.com/sanni/cartreader/wiki/Needed-Parts   
#### How to order a PCB: https://github.com/sanni/cartreader/wiki/How-to-order-printed-circuit-boards