//****************************************** // NES MODULE //****************************************** // mostly copy&pasted from "Famicom Dumper" 2019-08-31 by skaman // also based on "CoolArduino" by HardWareMan // Pinout changes: LED and CIRAM_A10 #ifdef ENABLE_NES //Line Content //28 Supported Mappers //106 Defines //136 Variables //197 Menus //383 Setup //412 No-Intro SD Database Functions //1125 Low Level Functions //1372 CRC Functions //1426 File Functions //1527 NES 2.0 Header Functions //1957 Config Functions //2760 ROM Functions //3951 RAM Functions //4384 Eeprom Functions //4574 NESmaker Flash Cart Functions /****************************************** Supported Mappers *****************************************/ // Supported Mapper Array (iNES Mapper #s) // Format = {mapper,prglo,prghi,chrlo,chrhi,ramlo,ramhi} static const uint8_t PROGMEM mapsize[] = { 0, 0, 1, 0, 1, 0, 2, // nrom [sram r/w] 1, 1, 5, 0, 5, 0, 3, // mmc1 [sram r/w] 2, 2, 4, 0, 0, 0, 0, // uxrom 3, 0, 1, 0, 3, 0, 0, // cnrom 4, 1, 5, 0, 6, 0, 1, // mmc3/mmc6 [sram/prgram r/w] 5, 3, 5, 5, 7, 0, 3, // mmc5 [sram r/w] 7, 2, 4, 0, 0, 0, 0, // axrom 9, 3, 3, 5, 5, 0, 0, // mmc2 (punch out) 10, 3, 4, 4, 5, 1, 1, // mmc4 [sram r/w] 11, 1, 3, 1, 5, 0, 0, // Color Dreams [UNLICENSED] 13, 1, 1, 0, 0, 0, 0, // cprom (videomation) 15, 6, 6, 0, 0, 0, 0, // K-1029/K-1030P [UNLICENSED] 16, 3, 4, 5, 6, 0, 1, // bandai x24c02 [eep r/w] 18, 3, 4, 5, 6, 0, 1, // jaleco ss8806 [sram r/w] 19, 3, 4, 5, 6, 0, 1, // namco 106/163 [sram/prgram r/w] // 20 - bad mapper, not used 21, 4, 4, 5, 6, 0, 1, // vrc4a/vrc4c [sram r/w] 22, 3, 3, 5, 5, 0, 0, // vrc2a 23, 3, 3, 5, 6, 0, 0, // vrc2b/vrc4e 24, 4, 4, 5, 5, 0, 0, // vrc6a (akumajou densetsu) 25, 3, 4, 5, 6, 0, 1, // vrc2c/vrc4b/vrc4d [sram r/w] 26, 4, 4, 5, 6, 1, 1, // vrc6b [sram r/w] 28, 5, 7, 0, 0, 0, 0, // Action 53 [UNLICENSED] 30, 4, 5, 0, 0, 0, 0, // unrom 512 (NESmaker) [UNLICENSED] 31, 6, 6, 0, 0, 0, 0, // NSF music compilations [UNLICENSED] 32, 3, 4, 5, 5, 0, 0, // irem g-101 33, 3, 4, 5, 6, 0, 0, // taito tc0190 34, 1, 8, 0, 4, 0, 0, // BxROM & NINA 35, 0, 7, 1, 8, 0, 0, // J.Y. Company ASIC [UNLICENSED] 36, 0, 3, 1, 5, 0, 0, // TXC 01-22000-400 Board [UNLICENSED] 37, 4, 4, 6, 6, 0, 0, // (super mario bros + tetris + world cup) 38, 1, 3, 0, 3, 0, 0, // Crime Busters [UNLICENSED] 42, 0, 3, 0, 5, 0, 0, // hacked FDS games converted to cartridge [UNLICENSED] 45, 3, 6, 0, 8, 0, 0, // ga23c asic multicart [UNLICENSED] 46, 1, 6, 0, 8, 0, 0, // Rumble Station [UNLICENSED] 47, 4, 4, 6, 6, 0, 0, // (super spike vball + world cup) 48, 3, 4, 6, 6, 0, 0, // taito tc0690 52, 0, 3, 0, 3, 0, 0, // Realtec 8213 [UNLICENSED] 56, 0, 7, 0, 6, 0, 0, // KS202 [UNLICENSED] 57, 0, 3, 0, 5, 0, 0, // BMC-GKA [UNLICENSED] 58, 1, 6, 1, 6, 0, 0, // BMC-GKB (C)NROM-based multicarts, duplicate of mapper 213 [UNLICENSED] 59, 0, 3, 0, 4, 0, 0, // BMC-T3H53 & BMC-D1038 [UNLICENSED] 60, 2, 2, 3, 3, 0, 0, // Reset-based NROM-128 4-in-1 multicarts [UNLICENSED] 62, 7, 7, 8, 8, 0, 0, // K-1017P [UNLICENSED] 63, 8, 8, 0, 0, 0, 0, // NTDEC "Powerful" multicart, 3072K [UNLICENSED] 64, 2, 3, 4, 5, 0, 0, // tengen rambo-1 [UNLICENSED] 65, 3, 4, 5, 6, 0, 0, // irem h-3001 66, 2, 3, 2, 3, 0, 0, // gxrom/mhrom 67, 3, 3, 5, 5, 0, 0, // sunsoft 3 68, 3, 3, 5, 6, 0, 1, // sunsoft 4 [sram r/w] 69, 3, 4, 5, 6, 0, 1, // sunsoft fme-7/5a/5b [sram r/w] 70, 3, 3, 5, 5, 0, 0, // bandai 71, 2, 4, 0, 0, 0, 0, // camerica/codemasters [UNLICENSED] 72, 3, 3, 5, 5, 0, 0, // jaleco jf-17 73, 3, 3, 0, 0, 0, 0, // vrc3 (salamander) 75, 3, 3, 5, 5, 0, 0, // vrc1 76, 3, 3, 5, 5, 0, 0, // namco 109 variant (megami tensei: digital devil story) 77, 3, 3, 3, 3, 0, 0, // (napoleon senki) 78, 3, 3, 5, 5, 0, 0, // irem 74hc161/32 79, 1, 2, 2, 3, 0, 0, // NINA-03/06 by AVE [UNLICENSED] 80, 3, 3, 5, 6, 0, 1, // taito x1-005 [prgram r/w] 82, 3, 3, 5, 6, 0, 1, // taito x1-017 [prgram r/w] // 84 - bad mapper, not used 85, 3, 5, 0, 5, 0, 1, // vrc7 [sram r/w] 86, 3, 3, 4, 4, 0, 0, // jaleco jf-13 (moero pro yakyuu) 87, 0, 1, 2, 3, 0, 0, // Jaleco/Konami CNROM (DIS_74X139X74) 88, 3, 3, 5, 5, 0, 0, // namco (dxrom variant) 89, 3, 3, 5, 5, 0, 0, // sunsoft 2 variant (tenka no goikenban: mito koumon) 90, 0, 7, 1, 8, 0, 0, // J.Y. Company ASIC [UNLICENSED] 91, 3, 5, 7, 8, 0, 0, // JY830623C/YY840238C boards [UNLICENSED] 92, 4, 4, 5, 5, 0, 0, // jaleco jf-19/jf-21 93, 3, 3, 0, 0, 0, 0, // sunsoft 2 94, 3, 3, 0, 0, 0, 0, // hvc-un1rom (senjou no ookami) 95, 3, 3, 3, 3, 0, 0, // namcot-3425 (dragon buster) 96, 3, 3, 0, 0, 0, 0, // (oeka kids) 97, 4, 4, 0, 0, 0, 0, // irem tam-s1 (kaiketsu yanchamaru) // 100 - bad mapper, not used // 101 - bad mapper, not used 105, 4, 4, 0, 0, 0, 0, // (nintendo world Championships 1990) [UNTESTED] 111, 5, 5, 0, 0, 0, 0, // GTROM [UNLICENSED] 113, 1, 4, 0, 5, 0, 0, // NINA-03/06 [UNLICENSED] 114, 3, 4, 5, 6, 0, 0, // SuperGame MMC3-clone [UNLICENSED] 118, 3, 4, 5, 5, 0, 1, // txsrom/mmc3 [sram r/w] 119, 3, 3, 4, 4, 0, 0, // tqrom/mmc3 126, 1, 8, 0, 8, 0, 0, // MMC3-based multicart (PJ-008, AT-207) [UNLICENSED] 134, 1, 8, 0, 8, 0, 0, // T4A54A, WX-KB4K, or BS-5652 [UNLICENSED] 140, 3, 3, 3, 5, 0, 0, // jaleco jf-11/jf-14 142, 1, 3, 0, 0, 0, 0, // UNL-KS7032 [UNLICENSED] 146, 1, 2, 2, 3, 0, 0, // Sachen 3015 [UNLICENSED] 148, 1, 2, 0, 4, 0, 0, // Sachen SA-0037 & Tengen 800008 [UNLICENSED] // 151 - bad mapper, not used 152, 2, 3, 5, 5, 0, 0, // BANDAI-74*161/161/32 153, 5, 5, 0, 0, 1, 1, // (famicom jump ii) [sram r/w] 154, 3, 3, 5, 5, 0, 0, // namcot-3453 (devil man) 155, 3, 3, 3, 5, 0, 1, // mmc1 variant [sram r/w] 157, 4, 4, 0, 0, 0, 0, // Datach 158, 3, 3, 5, 5, 0, 0, // tengen rambo-1 variant (alien syndrome (u)) [UNLICENSED] 159, 3, 4, 5, 6, 1, 1, // bandai x24c01 [eep r/w] 162, 6, 7, 0, 0, 0, 0, // Waixing FS304 [UNLICENSED] 163, 6, 7, 0, 0, 0, 0, // Nanjing FC-001 [UNLICENSED] 174, 3, 3, 4, 4, 0, 0, // NTDEC 5-in-1 [UNLICENSED] 176, 4, 4, 5, 5, 0, 0, // 8025 enhanced MMC3 [UNLICENSED] 177, 1, 7, 0, 0, 0, 0, // Henggedianzi Super Rich PCB [UNLICENSED] 178, 5, 5, 0, 0, 0, 0, // some Waixing PCBs [UNLICENSED] 180, 3, 3, 0, 0, 0, 0, // unrom variant (crazy climber) 184, 1, 1, 2, 3, 0, 0, // sunsoft 1 185, 0, 1, 1, 1, 0, 0, // cnrom lockout // 186 - bad mapper, not used 200, 1, 4, 1, 4, 0, 0, // HN-02 multicarts [UNLICENSED] 201, 1, 8, 1, 9, 0, 0, // NROM-256 multicarts [UNLICENSED] 202, 0, 3, 1, 4, 0, 0, // BMC-150IN1 multicarts [UNLICENSED] 203, 1, 4, 1, 4, 0, 0, // various NROM-128 multicarts [UNLICENSED] 206, 1, 3, 2, 4, 0, 0, // dxrom 207, 4, 4, 5, 5, 0, 0, // taito x1-005 variant (fudou myouou den) 209, 0, 7, 1, 8, 0, 0, // J.Y. Company ASIC [UNLICENSED] 210, 3, 5, 5, 6, 0, 0, // namco 175/340 211, 0, 7, 1, 8, 0, 0, // J.Y. Company ASIC [UNLICENSED] 212, 0, 3, 0, 4, 0, 0, // BMC Super HiK 300-in-1 [UNLICENSED] 213, 1, 6, 1, 6, 0, 0, // BMC-GKB (C)NROM-based multicarts, duplicate of mapper 58 [UNLICENSED] 214, 0, 3, 0, 4, 0, 0, // BMC-SUPERGUN-20IN1, BMC-190IN1 [UNLICENSED] 225, 4, 7, 5, 8, 0, 0, // ET-4310 (FC) + K-1010 (NES) [UNLICENSED] 226, 6, 7, 0, 0, 0, 0, // BMC-76IN1, BMC-SUPER42IN1, BMC-GHOSTBUSTERS63IN1 [UNLICENSED] 227, 1, 5, 0, 0, 0, 0, // 810449-C-A1 / FW-01 [UNLICENSED] 228, 4, 7, 5, 7, 0, 0, // Action 52 + Cheetahmen II [UNLICENSED] 229, 5, 5, 6, 6, 0, 0, // BMC 31-IN-1 [UNLICENSED] 232, 4, 4, 0, 0, 0, 0, // Camerica/Codemasters "Quattro" cartridges [UNLICENSED] 235, 6, 8, 0, 0, 0, 0, // "Golden Game" multicarts [UNLICENSED] 236, 0, 6, 0, 5, 0, 0, // Realtec 8031, 8099, 8106, 8155 [UNLICENSED] 240, 1, 5, 1, 5, 0, 3, // C&E Bootleg Board (Sheng Huo Lie Zhuan, Jing Ke Xin Zhuan) [UNLICENSED] 241, 3, 5, 0, 0, 0, 0, // BxROM with WRAM [UNLICENSED] 242, 5, 5, 0, 0, 0, 0, // ET-113 [UNLICENSED] 246, 5, 5, 7, 7, 0, 0, // C&E Feng Shen Bang [UNLICENSED] // 248 - bad mapper, not used 255, 4, 7, 5, 8, 0, 0, // 110-in-1 multicart (same as 225) [UNLICENSED] }; const char _file_name_no_number_fmt[] PROGMEM = "%s.%s"; const char _file_name_with_number_fmt[] PROGMEM = "%s.%02d.%s"; /****************************************** Defines *****************************************/ #define ROMSEL_HI PORTF |= (1 << 1) #define ROMSEL_LOW PORTF &= ~(1 << 1) #define PHI2_HI PORTF |= (1 << 0) #define PHI2_LOW PORTF &= ~(1 << 0) #define PRG_READ PORTF |= (1 << 7) #define PRG_WRITE PORTF &= ~(1 << 7) #define CHR_READ_HI PORTF |= (1 << 5) #define CHR_READ_LOW PORTF &= ~(1 << 5) #define CHR_WRITE_HI PORTF |= (1 << 2) #define CHR_WRITE_LOW PORTF &= ~(1 << 2) // RGB LED COMMON ANODE #define LED_RED_OFF setColor_RGB(0, 0, 0) #define LED_RED_ON setColor_RGB(255, 0, 0) #define LED_GREEN_OFF setColor_RGB(0, 0, 0) #define LED_GREEN_ON setColor_RGB(0, 255, 0) #define LED_BLUE_OFF setColor_RGB(0, 0, 0) #define LED_BLUE_ON setColor_RGB(0, 0, 255) #define MODE_READ \ { \ PORTK = 0xFF; \ DDRK = 0; \ } #define MODE_WRITE DDRK = 0xFF #define press 1 #define doubleclick 2 #define hold 3 #define longhold 4 /****************************************** Variables *****************************************/ // Mapper uint8_t mapcount = (sizeof(mapsize) / sizeof(mapsize[0])) / 7; uint8_t mapselect; const uint16_t PRG[] PROGMEM = { 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768 }; uint8_t prglo = 0; // Lowest Entry uint8_t prghi = 11; // Highest Entry const uint16_t CHR[] PROGMEM = { 0, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 }; uint8_t chrlo = 0; // Lowest Entry uint8_t chrhi = 10; // Highest Entry const uint8_t RAM[] PROGMEM = { 0, 8, 16, 32 }; uint8_t ramlo = 0; // Lowest Entry uint8_t ramhi = 3; // Highest Entry uint16_t banks; uint16_t prg; uint16_t chr; uint8_t ram; bool vrc4e = false; uint8_t prgchk0; uint8_t prgchk1; bool mmc6 = false; uint8_t prgchk2; uint8_t prgchk3; word eepsize; uint8_t bytecheck; uint8_t firstbyte; bool flashfound = false; // NESmaker 39SF040 Flash Cart bool busConflict = false; // Cartridge Config uint8_t mapper; uint8_t prgsize; uint8_t newprgsize; uint8_t chrsize; uint8_t newchrsize; uint8_t ramsize; uint8_t newramsize; /****************************************** Menus *****************************************/ // NES start menu static const char nesMenuItem1[] PROGMEM = "Read iNES Rom"; static const char nesMenuItem2[] PROGMEM = "Read PRG/CHR"; static const char nesMenuItem5[] PROGMEM = "Change Mapper"; static const char nesMenuItem6[] PROGMEM = "Flash NESMaker"; static const char* const menuOptionsNES[] PROGMEM = { nesMenuItem1, nesMenuItem2, FSTRING_READ_SAVE, FSTRING_WRITE_SAVE, nesMenuItem5, nesMenuItem6, FSTRING_RESET }; // NES chips menu static const char nesChipsMenuItem1[] PROGMEM = "Combined PRG+CHR"; static const char nesChipsMenuItem2[] PROGMEM = "Read only PRG"; static const char nesChipsMenuItem3[] PROGMEM = "Read only CHR"; static const char nesChipsMenuItem4[] PROGMEM = "Back"; static const char* const menuOptionsNESChips[] PROGMEM = { nesChipsMenuItem1, nesChipsMenuItem2, nesChipsMenuItem3, nesChipsMenuItem4 }; // NES start menu void nesMenu() { unsigned char answer; // create menu with title "NES CART READER" and 7 options to choose from convertPgm(menuOptionsNES, 7); answer = question_box(F("NES CART READER"), menuOptions, 7, 0); // wait for user choice to come back from the question box menu switch (answer) { // Read Rom case 0: display_Clear(); // Change working dir to root sd.chdir("/"); readRom_NES(); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); #ifdef ENABLE_GLOBAL_LOG save_log(); #endif display_Update(); wait(); break; // Read single chip case 1: nesChipMenu(); break; // Read RAM case 2: sd.chdir(); sprintf(folder, "NES/SAVE"); sd.mkdir(folder, true); sd.chdir(folder); readRAM(); resetROM(); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); display_Update(); wait(); break; // Write RAM case 3: writeRAM(); resetROM(); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); display_Update(); wait(); break; // Change Mapper case 4: setDefaultRomName(); setMapper(); checkMapperSize(); setPRGSize(); setCHRSize(); setRAMSize(); checkStatus_NES(); break; // Write FLASH case 5: if (mapper == 30) { writeFLASH(); resetROM(); } else { display_Clear(); println_Msg(F("Error:")); println_Msg(F("Can't write to this cartridge")); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); display_Update(); } wait(); break; // Reset case 6: resetArduino(); break; } } void nesChipMenu() { // create menu with title "Select NES Chip" and 4 options to choose from convertPgm(menuOptionsNESChips, 4); unsigned char answer = question_box(F("Select NES Chip"), menuOptions, 4, 0); // wait for user choice to come back from the question box menu switch (answer) { // Read combined PRG/CHR case 0: display_Clear(); // Change working dir to root sd.chdir("/"); readRaw_NES(); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); #ifdef ENABLE_GLOBAL_LOG save_log(); #endif display_Update(); wait(); break; // Read PRG case 1: CreateROMFolderInSD(); readPRG(false); resetROM(); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); display_Update(); wait(); break; // Read CHR case 2: CreateROMFolderInSD(); readCHR(false); resetROM(); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); display_Update(); wait(); break; // Return to Main Menu case 3: nesMenu(); wait(); break; } } /****************************************** Setup *****************************************/ void setup_NES() { // Request 5V setVoltage(VOLTS_SET_5V); // CPU R/W, IRQ, PPU /RD, PPU /A13, CIRAM /CE, PPU /WR, /ROMSEL, PHI2 DDRF = 0b10110111; // CPU R/W, IRQ, PPU /RD, PPU /A13, CIRAM /CE, PPU /WR, /ROMSEL, PHI2 PORTF = 0b11111111; // A0-A7 to Output DDRL = 0xFF; // A8-A14 to Output DDRA = 0xFF; // Set CIRAM A10 to Input DDRC &= ~(1 << 2); // Activate Internal Pullup Resistors PORTC |= (1 << 2); // Set D0-D7 to Input PORTK = 0xFF; DDRK = 0; set_address(0); LED_RED_OFF; LED_GREEN_OFF; LED_BLUE_OFF; } /****************************************** Get Mapping from SD database *****************************************/ uint32_t uppow2(uint32_t n) { for (int8_t x = 31; x >= 0; x--) if (n & (1u << x)) { if ((1u << x) != n) return (1u << (x + 1)); break; } return n; } struct database_entry { char filename[128]; char crc_str[8 + 1 + 8 + 1 + 32 + 1]; uint32_t crc; char* crc512_str; uint32_t crc512; char* iNES_str; }; void printPRG(unsigned long myOffset) { display_Clear(); print_Msg(F("Printing PRG at ")); println_Msg(myOffset); char myBuffer[3]; for (size_t currLine = 0; currLine < 512; currLine += 16) { for (uint8_t currByte = 0; currByte < 16; currByte++) { itoa(read_prg_byte(myOffset + currLine + currByte), myBuffer, 16); for (size_t i = 0; i < 2 - strlen(myBuffer); i++) { print_Msg(F("0")); } // Now print the significant bits print_Msg(myBuffer); print_Msg(" "); } println_Msg(""); } display_Update(); } void setDefaultRomName() { romName[0] = 'C'; romName[1] = 'A'; romName[2] = 'R'; romName[3] = 'T'; romName[4] = '\0'; } void setRomnameFromString(const char* input) { uint8_t myLength = 0; for (uint8_t i = 0; i < 20 && myLength < 15; i++) { // Stop at first "(" to remove "(Country)" if (input[i] == '(') { break; } if ( (input[i] >= '0' && input[i] <= '9') || (input[i] >= 'A' && input[i] <= 'Z') || (input[i] >= 'a' && input[i] <= 'z')) { romName[myLength++] = input[i]; } } // If name consists out of all japanese characters use CART as name if (myLength == 0) { setDefaultRomName(); } } void getMapping() { FsFile database; uint32_t oldcrc32 = 0xFFFFFFFF; uint32_t oldcrc32MMC3 = 0xFFFFFFFF; char crcStr[9]; display_Clear(); sd.chdir(); if (!database.open("nes.txt", O_READ)) { print_FatalError(F("Database file not found")); // never reached } // Read first 512 bytes of first and last block of PRG ROM and compute CRC32 // MMC3 maps the last 8KB block of PRG ROM to 0xE000 while 0x8000 can contain random data after bootup for (size_t c = 0; c < 512; c++) { UPDATE_CRC(oldcrc32, read_prg_byte(0x8000 + c)); UPDATE_CRC(oldcrc32MMC3, read_prg_byte(0xE000 + c)); } oldcrc32 = ~oldcrc32; oldcrc32MMC3 = ~oldcrc32MMC3; bool browseDatabase; // Filter out all 0xFF checksums at 0x8000 and 0xE000 if (oldcrc32 == 0xBD7BC39F && oldcrc32MMC3 == 0xBD7BC39F) { println_Msg(F("No data found.")); println_Msg(F("Using manual selection")); display_Update(); delay(500); setDefaultRomName(); browseDatabase = selectMapping(database); } else { println_Msg(F("Searching database")); print_Msg(F("for ")); sprintf(crcStr, "%08lX", oldcrc32); print_Msg(crcStr); if (oldcrc32 != oldcrc32MMC3) { char crcStrMMC3[9]; print_Msg(F(" or ")); sprintf(crcStrMMC3, "%08lX", oldcrc32MMC3); print_Msg(crcStrMMC3); } println_Msg(F("...")); display_Update(); while (database.available()) { struct database_entry entry; readDatabaseEntry(database, &entry); //if checksum search was successful set mapper and end search, also filter out 0xFF checksum if ( entry.crc512 != 0xBD7BC39F && (entry.crc512 == oldcrc32 || entry.crc512 == oldcrc32MMC3)) { // Rewind to start of entry rewind_line(database, 3); break; } } if (database.available()) { browseDatabase = true; } else { // File searched until end but nothing found println_Msg(FS(FSTRING_EMPTY)); println_Msg(F("CRC not found in database")); println_Msg(F("Using manual selection")); display_Update(); delay(500); // Print content of PRG for debugging //printPRG(0x8000); //printPRG(0xE000); // Change ROM name to CART setDefaultRomName(); browseDatabase = selectMapping(database); } } if (browseDatabase) { uint8_t fastScrolling = 1; // Display database while (database.available()) { #ifdef ENABLE_GLOBAL_LOG // Disable log to prevent unnecessary logging dont_log = true; #endif uint8_t iNES[16]; uint8_t* output; char* input; struct database_entry entry; display_Clear(); readDatabaseEntry(database, &entry); input = entry.iNES_str; output = iNES; for (uint8_t i = 0; i < sizeof(iNES); i++) { unsigned int buf; sscanf(input, "%2X", &buf); *(output++) = buf; input += 2; } mapper = (iNES[6] >> 4) | (iNES[7] & 0xF0) | (iNES[8] & 0x0F); if ((iNES[9] & 0x0F) != 0x0F) { // simple notation prgsize = (iNES[4] | ((iNES[9] & 0x0F) << 8)); //*16 } else { // exponent-multiplier notation prgsize = (((1 << (iNES[4] >> 2)) * ((iNES[4] & 0b11) * 2 + 1)) >> 14); //*16 } if (prgsize != 0) prgsize = (int(log(prgsize) / log(2))); if ((iNES[9] & 0xF0) != 0xF0) { // simple notation chrsize = (uppow2(iNES[5] | ((iNES[9] & 0xF0) << 4))) * 2; //*4 } else { // exponent-multiplier notation chrsize = (((1 << (iNES[5] >> 2)) * ((iNES[5] & 0b11) * 2 + 1)) >> 13) * 2; //*4 } if (chrsize != 0) chrsize = (int(log(chrsize) / log(2))); ramsize = ((iNES[10] & 0xF0) ? (64 << ((iNES[10] & 0xF0) >> 4)) : 0) / 4096; //*4 if (ramsize != 0) ramsize = (int(log(ramsize) / log(2))); prg = (int_pow(2, prgsize)) * 16; if (chrsize == 0) chr = 0; // 0K else chr = (int_pow(2, chrsize)) * 4; if (ramsize == 0) ram = 0; // 0K else if (mapper == 82) ram = 5; // 5K else ram = (int_pow(2, ramsize)) * 4; // Mapper Variants // Identify variant for use across multiple functions if (mapper == 4) { // Check for MMC6/MMC3 checkMMC6(); if (mmc6) ram = 1; // 1K } println_Msg(entry.filename); printNESSettings(); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 0); if (fastScrolling > 1) println_Msg(F(" (fast)")); else println_Msg(""); print_STR(right_to_select_STR, 1); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 0); if (fastScrolling > 1) println_Msg(F(" (fast)")); else println_Msg(""); print_STR(press_to_select_STR, 1); #elif defined(SERIAL_MONITOR) println_Msg(F("U/D to Change")); println_Msg(F("Space to Select")); #endif display_Update(); #ifdef ENABLE_GLOBAL_LOG // Enable log again dont_log = false; #endif uint8_t b = 0; do { b = checkButton(); } while (b == 0); if (b == 1) { // 1: Next record if (fastScrolling > 1) { for (uint8_t skipped = 0; skipped < fastScrolling * 3; skipped++) { skip_line(&database); } } continue; } if (b == 2) { // 2: Previous record if (fastScrolling > 1) rewind_line(database, fastScrolling * 3 + 3); else rewind_line(database, 6); continue; } if (b == 4) { // 4: Toggle Fast Scrolling if (fastScrolling == 1) fastScrolling = 30; else fastScrolling = 1; continue; } // anything else: select current record setRomnameFromString(entry.filename); // Save Mapper EEPROM_writeAnything(7, mapper); EEPROM_writeAnything(8, prgsize); EEPROM_writeAnything(9, chrsize); EEPROM_writeAnything(10, ramsize); break; } } database.close(); } static void readDatabaseEntry(FsFile& database, struct database_entry* entry) { get_line(entry->filename, &database, sizeof(entry->filename)); get_line(entry->crc_str, &database, sizeof(entry->crc_str)); skip_line(&database); entry->crc_str[8] = 0; entry->crc512_str = &entry->crc_str[8 + 1]; entry->crc512_str[8] = 0; entry->iNES_str = &entry->crc_str[8 + 1 + 8 + 1]; // Convert "4E4553" to (0x4E, 0x45, 0x53) unsigned int iNES_BUF; for (uint8_t j = 0; j < 16; j++) { sscanf(entry->iNES_str + j * 2, "%2X", &iNES_BUF); iNES_HEADER[j] = iNES_BUF; } entry->crc = strtoul(entry->crc_str, NULL, 16); entry->crc512 = strtoul(entry->crc512_str, NULL, 16); } bool selectMapping(FsFile& database) { // Select starting letter uint8_t myLetter = starting_letter(); if (myLetter == 27) { // Change Mapper setMapper(); checkMapperSize(); setPRGSize(); setCHRSize(); setRAMSize(); return 0; } else { #ifdef ENABLE_GLOBAL_LOG // Disable log to prevent unnecessary logging println_Log(F("Select Mapping from List")); dont_log = true; #endif database.rewind(); // Skip ahead to selected starting letter if ((myLetter > 0) && (myLetter <= 26)) { myLetter += 'A' - 1; struct database_entry entry; // Read current name do { readDatabaseEntry(database, &entry); } while (database.available() && entry.filename[0] != myLetter); rewind_line(database, 3); } #ifdef ENABLE_GLOBAL_LOG // Enable log again dont_log = false; #endif } return 1; } void readRom_NES() { // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".nes"); // create a new folder EEPROM_readAnything(0, foldern); sprintf(folder, "NES/ROM/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); display_Clear(); print_STR(saving_to_STR, 0); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(0, foldern); // Open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_FatalError(sd_error_STR); } //Initialize progress bar uint32_t processedProgressBar = 0; uint32_t totalProgressBar = (uint32_t)(16 + prgsize * 16 * 1024 + chrsize * 4 * 1024); draw_progressbar(0, totalProgressBar); //Write iNES header myFile.write(iNES_HEADER, 16); // update progress bar processedProgressBar += 16; draw_progressbar(processedProgressBar, totalProgressBar); //Write PRG readPRG(true); // update progress bar processedProgressBar += prgsize * 16 * 1024; draw_progressbar(processedProgressBar, totalProgressBar); //Write CHR readCHR(true); // update progress bar processedProgressBar += chrsize * 4 * 1024; draw_progressbar(processedProgressBar, totalProgressBar); // Close the file: myFile.close(); // Compare CRC32 with database compareCRC("nes.txt", 0, 1, 16); } void readRaw_NES() { // Get name, add extension and convert to char array for sd lib strcpy(fileName, romName); strcat(fileName, ".bin"); // create a new folder EEPROM_readAnything(0, foldern); sprintf(folder, "NES/ROM/%s/%d", romName, foldern); sd.mkdir(folder, true); sd.chdir(folder); display_Clear(); print_STR(saving_to_STR, 0); print_Msg(folder); println_Msg(F("/...")); display_Update(); // write new folder number back to eeprom foldern = foldern + 1; EEPROM_writeAnything(0, foldern); // Open file on sd card if (!myFile.open(fileName, O_RDWR | O_CREAT)) { print_FatalError(sd_error_STR); } //Initialize progress bar uint32_t processedProgressBar = 0; uint32_t totalProgressBar = (uint32_t)(prgsize * 16 * 1024 + chrsize * 4 * 1024); draw_progressbar(0, totalProgressBar); //Write PRG readPRG(true); // update progress bar processedProgressBar += prgsize * 16 * 1024; draw_progressbar(processedProgressBar, totalProgressBar); //Write CHR readCHR(true); // update progress bar processedProgressBar += chrsize * 4 * 1024; draw_progressbar(processedProgressBar, totalProgressBar); // Close the file: myFile.close(); // Compare CRC32 with database compareCRC("nes.txt", 0, 0, 0); } /****************************************** Low Level Functions *****************************************/ static void set_address(unsigned int address) { unsigned char l = address & 0xFF; unsigned char h = address >> 8; PORTL = l; PORTA = h; // PPU /A13 if ((address >> 13) & 1) PORTF &= ~(1 << 4); else PORTF |= 1 << 4; } static void set_romsel(unsigned int address) { if (address & 0x8000) { ROMSEL_LOW; } else { ROMSEL_HI; } } static unsigned char read_prg_byte(unsigned int address) { MODE_READ; PRG_READ; set_address(address); PHI2_HI; set_romsel(address); _delay_us(1); return PINK; } static unsigned char read_chr_byte(unsigned int address) { MODE_READ; PHI2_HI; ROMSEL_HI; set_address(address); CHR_READ_LOW; _delay_us(1); uint8_t result = PINK; CHR_READ_HI; return result; } static void write_prg_byte(unsigned int address, uint8_t data) { PHI2_LOW; ROMSEL_HI; MODE_WRITE; PRG_WRITE; PORTK = data; set_address(address); // PHI2 low, ROMSEL always HIGH // _delay_us(1); PHI2_HI; //_delay_us(10); set_romsel(address); // ROMSEL is low if need, PHI2 high _delay_us(1); // WRITING //_delay_ms(1); // WRITING // PHI2 low, ROMSEL high PHI2_LOW; _delay_us(1); ROMSEL_HI; // Back to read mode // _delay_us(1); PRG_READ; MODE_READ; set_address(0); // Set phi2 to high state to keep cartridge unreseted // _delay_us(1); PHI2_HI; // _delay_us(1); } void resetROM() { set_address(0); PHI2_HI; ROMSEL_HI; } void write_mmc1_byte(unsigned int address, uint8_t data) { // write loop for 5 bit register if (address >= 0xE000) { for (uint8_t i = 0; i < 5; i++) { write_reg_byte(address, data >> i); // shift 1 bit into temp register [WRITE RAM SAFE] } } else { for (uint8_t j = 0; j < 5; j++) { write_prg_byte(address, data >> j); // shift 1 bit into temp register } } } // REFERENCE FOR REGISTER WRITE TO 0xE000/0xF000 // PORTF 7 = CPU R/W = 0 // PORTF 6 = /IRQ = 1 // PORTF 5 = PPU /RD = 1 // PORTF 4 = PPU /A13 = 1 // PORTF 3 = CIRAM /CE = 1 // PORTF 2 = PPU /WR = 1 // PORTF 1 = /ROMSEL // PORTF 0 = PHI2 (M2) // WRITE RAM SAFE TO REGISTERS 0xE000/0xF000 static void write_reg_byte(unsigned int address, uint8_t data) { // FIX FOR MMC1 RAM CORRUPTION PHI2_LOW; ROMSEL_HI; // A15 HI = E000 MODE_WRITE; PRG_WRITE; // CPU R/W LO PORTK = data; set_address(address); // PHI2 low, ROMSEL always HIGH // DIRECT PIN TO PREVENT RAM CORRUPTION // DIFFERENCE BETWEEN M2 LO AND ROMSEL HI MUST BE AROUND 33ns // IF TIME IS GREATER THAN 33ns THEN WRITES TO 0xE000/0xF000 WILL CORRUPT RAM AT 0x6000/0x7000 PORTF = 0b01111101; // ROMSEL LO/M2 HI PORTF = 0b01111110; // ROMSEL HI/M2 LO _delay_us(1); // Back to read mode PRG_READ; MODE_READ; set_address(0); // Set phi2 to high state to keep cartridge unreseted PHI2_HI; } static void write_ram_byte(unsigned int address, uint8_t data) { // Mapper 19 (Namco 106/163) WRITE RAM SAFE ($E000-$FFFF) PHI2_LOW; ROMSEL_HI; MODE_WRITE; PRG_WRITE; PORTK = data; set_address(address); // PHI2 low, ROMSEL always HIGH PHI2_HI; ROMSEL_LOW; // SET /ROMSEL LOW OTHERWISE CORRUPTS RAM _delay_us(1); // WRITING // PHI2 low, ROMSEL high PHI2_LOW; _delay_us(1); ROMSEL_HI; // Back to read mode PRG_READ; MODE_READ; set_address(0); // Set phi2 to high state to keep cartridge unreseted PHI2_HI; } static void write_wram_byte(unsigned int address, uint8_t data) { // Mapper 5 (MMC5) RAM PHI2_LOW; ROMSEL_HI; set_address(address); PORTK = data; _delay_us(1); MODE_WRITE; PRG_WRITE; PHI2_HI; _delay_us(1); // WRITING PHI2_LOW; ROMSEL_HI; // Back to read mode PRG_READ; MODE_READ; set_address(0); // Set phi2 to high state to keep cartridge unreseted PHI2_HI; } int int_pow(int base, int exp) { // Power for int int result = 1; while (exp) { if (exp & 1) result *= base; exp /= 2; base *= base; } return result; } /****************************************** CRC Functions *****************************************/ void printCRC(char* checkFile, uint32_t* crcCopy, unsigned long offset) { uint32_t crc; char tempCRC[9]; FsFile crcFile = sd.open(checkFile); crcFile.seek(offset); crc = calculateCRC(crcFile); crcFile.close(); if (crcCopy != NULL) { *crcCopy = crc; } sprintf(tempCRC, "%08lX", crc); print_Msg(F("CRC: ")); println_Msg(tempCRC); display_Update(); } /****************************************** File Functions *****************************************/ void CreateROMFolderInSD() { sd.chdir(); sprintf(folder, "NES/ROM"); sd.mkdir(folder, true); sd.chdir(folder); } FsFile createNewFile(const char* prefix, const char* extension) { char filename[FILENAME_LENGTH]; snprintf_P(filename, sizeof(filename), _file_name_no_number_fmt, prefix, extension); for (uint8_t i = 0; i < 100; i++) { if (!sd.exists(filename)) { return sd.open(fileName, O_RDWR | O_CREAT); } snprintf_P(filename, sizeof(filename), _file_name_with_number_fmt, prefix, i, extension); } // Could not find an available name, recompose the original name and error out. snprintf_P(filename, sizeof(filename), _file_name_no_number_fmt, prefix, extension); LED_RED_ON; display_Clear(); print_Msg(filename); println_Msg(F(": no available name")); display_Update(); print_FatalError(sd_error_STR); LED_RED_OFF; } void CreatePRGFileInSD() { myFile = createNewFile("PRG", "bin"); } void CreateCHRFileInSD() { myFile = createNewFile("CHR", "bin"); } //createNewFile fails to dump RAM if ROM isn't dumped first //void CreateRAMFileInSD() { //myFile = createNewFile("RAM", "bin"); //} //Temporary fix void CreateRAMFileInSD() { char fileCount[3]; strcpy(fileName, "RAM"); strcat(fileName, ".bin"); for (uint8_t i = 0; i < 100; i++) { if (!sd.exists(fileName)) { myFile = sd.open(fileName, O_RDWR | O_CREAT); break; } sprintf(fileCount, "%02d", i); strcpy(fileName, "RAM."); strcat(fileName, fileCount); strcat(fileName, ".bin"); } if (!myFile) { LED_RED_ON; display_Clear(); println_Msg(F("RAM FILE FAILED!")); display_Update(); //print_Error(F("SD Error"), true); LED_RED_OFF; } } /****************************************** Config Functions *****************************************/ void setMapper() { uint8_t newmapper; #ifdef ENABLE_GLOBAL_LOG // Disable log to prevent unnecessary logging println_Log(F("Set Mapper manually")); dont_log = true; #endif // OLED #if defined(ENABLE_OLED) chooseMapper: // Read stored mapper EEPROM_readAnything(7, newmapper); if (newmapper > 220) newmapper = 0; // Split into digits uint8_t hundreds = newmapper / 100; uint8_t tens = newmapper / 10 - hundreds * 10; uint8_t units = newmapper - hundreds * 100 - tens * 10; // Cycle through all 3 digits uint8_t digit = 0; while (digit < 3) { display_Clear(); println_Msg(F("Select Mapper:")); display.setCursor(23, 20); println_Msg(hundreds); display.setCursor(43, 20); println_Msg(tens); display.setCursor(63, 20); println_Msg(units); println_Msg(""); println_Msg(""); println_Msg(""); print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); if (digit == 0) { display.setDrawColor(1); display.drawLine(20, 30, 30, 30); display.setDrawColor(0); display.drawLine(40, 30, 50, 30); display.drawLine(60, 30, 70, 30); display.setDrawColor(1); } else if (digit == 1) { display.setDrawColor(0); display.drawLine(20, 30, 30, 30); display.setDrawColor(1); display.drawLine(40, 30, 50, 30); display.setDrawColor(0); display.drawLine(60, 30, 70, 30); display.setDrawColor(1); } else if (digit == 2) { display.setDrawColor(0); display.drawLine(20, 30, 30, 30); display.drawLine(40, 30, 50, 30); display.setDrawColor(1); display.drawLine(60, 30, 70, 30); } display.updateDisplay(); while (1) { /* Check Button 1 click 2 doubleClick 3 hold 4 longHold */ uint8_t b = checkButton(); if (b == 1) { if (digit == 0) { if (hundreds < 2) hundreds++; else hundreds = 0; } else if (digit == 1) { if (hundreds == 2) { if (tens < 1) tens++; else tens = 0; } else { if (tens < 9) tens++; else tens = 0; } } else if (digit == 2) { if (units < 9) units++; else units = 0; } break; } else if (b == 2) { if (digit == 0) { if (hundreds > 0) hundreds--; else hundreds = 2; } else if (digit == 1) { if (hundreds == 2) { if (tens > 0) tens--; else tens = 1; } else { if (tens > 0) tens--; else tens = 9; } } else if (digit == 2) { if (units > 0) units--; else units = 9; } break; } else if (b == 3) { digit++; break; } } } display_Clear(); newmapper = hundreds * 100 + tens * 10 + units; // Check if valid bool validMapper = 0; uint8_t mapcount = (sizeof(mapsize) / sizeof(mapsize[0])) / 7; for (uint8_t currMaplist = 0; currMaplist < mapcount; currMaplist++) { if (pgm_read_byte(mapsize + currMaplist * 7) == newmapper) validMapper = 1; } if (!validMapper) { errorLvl = 1; display.println(F("Mapper not supported")); display.updateDisplay(); wait(); goto chooseMapper; } // LCD #elif defined(ENABLE_LCD) int i = 0; display_Clear(); mapselect = pgm_read_byte(mapsize + i * 7); print_Msg(F("Mapper: ")); println_Msg(mapselect); println_Msg(FS(FSTRING_EMPTY)); print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); display_Update(); while (1) { uint8_t b = checkButton(); if (b == 2) { // Previous Mapper if (i == 0) i = mapcount - 1; else i--; display_Clear(); mapselect = pgm_read_byte(mapsize + i * 7); print_Msg(F("Mapper: ")); println_Msg(mapselect); println_Msg(FS(FSTRING_EMPTY)); print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); display_Update(); } else if (b == 1) { // Next Mapper if (i == (mapcount - 1)) i = 0; else i++; display_Clear(); mapselect = pgm_read_byte(mapsize + i * 7); print_Msg(F("Mapper: ")); println_Msg(mapselect); println_Msg(FS(FSTRING_EMPTY)); print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); display_Update(); } else if (b == 3) { // Long Press - Execute newmapper = mapselect; break; } } display.setCursor(0, 56 + 8); print_Msg(F("MAPPER ")); print_Msg(newmapper); println_Msg(F(" SELECTED")); display_Update(); delay(500); // Serial Monitor #elif defined(ENABLE_SERIAL) setmapper: String newmap; bool mapfound = false; Serial.println(F("SUPPORTED MAPPERS:")); for (size_t i = 0; i < mapcount; i++) { int index = i * 7; mapselect = pgm_read_byte(mapsize + index); Serial.print("["); Serial.print(mapselect); Serial.print("]"); if (i < mapcount - 1) { if ((i != 0) && ((i + 1) % 10 == 0)) Serial.println(FSTRING_EMPTY); else Serial.print(F("\t")); } else Serial.println(FSTRING_EMPTY); } Serial.print(F("Enter Mapper: ")); while (Serial.available() == 0) {} newmap = Serial.readStringUntil('\n'); Serial.println(newmap); newmapper = newmap.toInt(); for (uint8_t i = 0; i < mapcount; i++) { int index = i * 7; mapselect = pgm_read_byte(mapsize + index); if (newmapper == mapselect) mapfound = true; } if (mapfound == false) { Serial.println(F("MAPPER NOT SUPPORTED!")); Serial.println(FSTRING_EMPTY); newmapper = 0; goto setmapper; } #endif EEPROM_writeAnything(7, newmapper); mapper = newmapper; #ifdef ENABLE_GLOBAL_LOG // Enable log again dont_log = false; #endif } void checkMapperSize() { for (uint8_t i = 0; i < mapcount; i++) { int index = i * 7; uint8_t mapcheck = pgm_read_byte(mapsize + index); if (mapcheck == mapper) { prglo = pgm_read_byte(mapsize + index + 1); prghi = pgm_read_byte(mapsize + index + 2); chrlo = pgm_read_byte(mapsize + index + 3); chrhi = pgm_read_byte(mapsize + index + 4); ramlo = pgm_read_byte(mapsize + index + 5); ramhi = pgm_read_byte(mapsize + index + 6); break; } } } void setPRGSize() { #ifdef ENABLE_GLOBAL_LOG // Disable log to prevent unnecessary logging println_Log(F("Set PRG Size")); dont_log = true; #endif #if (defined(ENABLE_LCD) || defined(ENABLE_OLED)) display_Clear(); if (prglo == prghi) newprgsize = prglo; else { int i = prglo; display_Clear(); print_Msg(F("PRG Size: ")); println_Msg(pgm_read_word(&(PRG[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); while (1) { uint8_t b = checkButton(); if (b == doubleclick) { // Previous if (i == prglo) i = prghi; else i--; display_Clear(); print_Msg(F("PRG Size: ")); println_Msg(pgm_read_word(&(PRG[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); } if (b == press) { // Next if (i == prghi) i = prglo; else i++; display_Clear(); print_Msg(F("PRG Size: ")); println_Msg(pgm_read_word(&(PRG[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); } if (b == hold) { // Long Press - Execute newprgsize = i; break; } } display.setCursor(0, 56); // Display selection at bottom } print_Msg(F("PRG SIZE ")); print_Msg(pgm_read_word(&(PRG[newprgsize]))); println_Msg(F("K")); display_Update(); delay(500); #elif defined(ENABLE_SERIAL) if (prglo == prghi) newprgsize = prglo; else { setprg: String sizePRG; for (size_t i = 0; i < (prghi - prglo + 1); i++) { Serial.print(F("Select PRG Size: ")); Serial.print(i); Serial.print(F(" = ")); Serial.print(pgm_read_word(&(PRG[i + prglo]))); Serial.println(F("K")); } Serial.print(F("Enter PRG Size: ")); while (Serial.available() == 0) {} sizePRG = Serial.readStringUntil('\n'); Serial.println(sizePRG); newprgsize = sizePRG.toInt() + prglo; if (newprgsize > prghi) { Serial.println(F("SIZE NOT SUPPORTED")); Serial.println(FSTRING_EMPTY); goto setprg; } } Serial.print(F("PRG Size = ")); Serial.print(pgm_read_word(&(PRG[newprgsize]))); Serial.println(F("K")); #endif EEPROM_writeAnything(8, newprgsize); prgsize = newprgsize; #ifdef ENABLE_GLOBAL_LOG // Enable log again dont_log = false; #endif } void setCHRSize() { #ifdef ENABLE_GLOBAL_LOG // Disable log to prevent unnecessary logging println_Log(F("Set CHR Size")); dont_log = true; #endif #if (defined(ENABLE_LCD) || defined(ENABLE_OLED)) display_Clear(); if (chrlo == chrhi) newchrsize = chrlo; else { int i = chrlo; display_Clear(); print_Msg(F("CHR Size: ")); println_Msg(pgm_read_word(&(CHR[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); while (1) { uint8_t b = checkButton(); if (b == doubleclick) { // Previous if (i == chrlo) i = chrhi; else i--; display_Clear(); print_Msg(F("CHR Size: ")); println_Msg(pgm_read_word(&(CHR[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); } if (b == press) { // Next if (i == chrhi) i = chrlo; else i++; display_Clear(); print_Msg(F("CHR Size: ")); println_Msg(pgm_read_word(&(CHR[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); } if (b == hold) { // Long Press - Execute newchrsize = i; break; } } display.setCursor(0, 56); // Display selection at bottom } print_Msg(F("CHR SIZE ")); print_Msg(pgm_read_word(&(CHR[newchrsize]))); println_Msg(F("K")); display_Update(); delay(500); #elif defined(ENABLE_SERIAL) if (chrlo == chrhi) newchrsize = chrlo; else { setchr: String sizeCHR; for (size_t i = 0; i < (chrhi - chrlo + 1); i++) { Serial.print(F("Select CHR Size: ")); Serial.print(i); Serial.print(F(" = ")); Serial.print(pgm_read_word(&(CHR[i + chrlo]))); Serial.println(F("K")); } Serial.print(F("Enter CHR Size: ")); while (Serial.available() == 0) {} sizeCHR = Serial.readStringUntil('\n'); Serial.println(sizeCHR); newchrsize = sizeCHR.toInt() + chrlo; if (newchrsize > chrhi) { Serial.println(F("SIZE NOT SUPPORTED")); Serial.println(FSTRING_EMPTY); goto setchr; } } Serial.print(F("CHR Size = ")); Serial.print(pgm_read_word(&(CHR[newchrsize]))); Serial.println(F("K")); #endif EEPROM_writeAnything(9, newchrsize); chrsize = newchrsize; #ifdef ENABLE_GLOBAL_LOG // Enable log again dont_log = false; #endif } void setRAMSize() { #ifdef ENABLE_GLOBAL_LOG // Disable log to prevent unnecessary logging println_Log(F("Set RAM Size")); dont_log = true; #endif #if (defined(ENABLE_LCD) || defined(ENABLE_OLED)) display_Clear(); if (ramlo == ramhi) newramsize = ramlo; else { int i = 0; display_Clear(); print_Msg(F("RAM Size: ")); if (mapper == 0) println_Msg(pgm_read_byte(&(RAM[i])) / 4); else if (mapper == 16) println_Msg(pgm_read_byte(&(RAM[i])) * 32); else if (mapper == 19) { if (i == 2) println_Msg(F("128")); else println_Msg(pgm_read_byte(&(RAM[i]))); } else if ((mapper == 159) || (mapper == 80)) println_Msg(pgm_read_byte(&(RAM[i])) * 16); else if (mapper == 82) println_Msg(i * 5); else println_Msg(pgm_read_byte(&(RAM[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); while (1) { uint8_t b = checkButton(); if (b == doubleclick) { // Previous Mapper if (i == 0) i = ramhi; else i--; display_Clear(); print_Msg(F("RAM Size: ")); if (mapper == 0) println_Msg(pgm_read_byte(&(RAM[i])) / 4); else if (mapper == 16) println_Msg(pgm_read_byte(&(RAM[i])) * 32); else if (mapper == 19) { if (i == 2) println_Msg(F("128")); else println_Msg(pgm_read_byte(&(RAM[i]))); } else if ((mapper == 159) || (mapper == 80)) println_Msg(pgm_read_byte(&(RAM[i])) * 16); else if (mapper == 82) println_Msg(i * 5); else println_Msg(pgm_read_byte(&(RAM[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); } if (b == press) { // Next if (i == ramhi) i = 0; else i++; display_Clear(); print_Msg(F("RAM Size: ")); if (mapper == 0) println_Msg(pgm_read_byte(&(RAM[i])) / 4); else if (mapper == 16) println_Msg(pgm_read_byte(&(RAM[i])) * 32); else if (mapper == 19) { if (i == 2) println_Msg(F("128")); else println_Msg(pgm_read_byte(&(RAM[i]))); } else if ((mapper == 159) || (mapper == 80)) println_Msg(pgm_read_byte(&(RAM[i])) * 16); else if (mapper == 82) println_Msg(i * 5); else println_Msg(pgm_read_byte(&(RAM[i]))); println_Msg(FS(FSTRING_EMPTY)); #if defined(ENABLE_OLED) print_STR(press_to_change_STR, 1); println_Msg(F("Press right to select")); #elif defined(ENABLE_LCD) print_STR(rotate_to_change_STR, 1); print_STR(press_to_select_STR, 1); #endif display_Update(); } if (b == hold) { // Long Press - Execute newramsize = i; break; } } display.setCursor(0, 56); // Display selection at bottom } if ((mapper == 16) || (mapper == 159)) { int sizeEEP = 0; print_Msg(F("EEPROM SIZE ")); if (mapper == 16) sizeEEP = pgm_read_byte(&(RAM[newramsize])) * 32; else sizeEEP = pgm_read_byte(&(RAM[newramsize])) * 16; print_Msg(sizeEEP); println_Msg(F("B")); } else if (mapper == 19) { print_Msg(F("RAM SIZE ")); if (newramsize == 2) println_Msg(F("128B")); else { print_Msg(pgm_read_byte(&(RAM[newramsize]))); println_Msg(F("K")); } } else if (mapper == 80) { print_Msg(F("RAM SIZE ")); print_Msg(pgm_read_byte(&(RAM[newramsize])) * 16); println_Msg(F("B")); } else { print_Msg(F("RAM SIZE ")); if (mapper == 0) print_Msg(newramsize * 2); else if (mapper == 82) print_Msg(newramsize * 5); else print_Msg(pgm_read_byte(&(RAM[newramsize]))); println_Msg(F("K")); } display_Update(); delay(500); #elif defined(ENABLE_SERIAL) if (ramlo == ramhi) newramsize = ramlo; else { setram: String sizeRAM; for (size_t i = 0; i < (ramhi - ramlo + 1); i++) { Serial.print(F("Select RAM Size: ")); Serial.print(i); Serial.print(F(" = ")); if (mapper == 0) { Serial.print(pgm_read_byte(&(RAM[i])) / 4); Serial.println(F("K")); } else if ((mapper == 16) || (mapper == 159)) { if (mapper == 16) Serial.print(pgm_read_byte(&(RAM[i + ramlo])) * 32); else Serial.print(pgm_read_byte(&(RAM[i + ramlo])) * 16); Serial.println(F("B")); } else if (mapper == 19) { if (i == 2) Serial.println(F("128B")); else { Serial.print(pgm_read_byte(&(RAM[i + ramlo]))); Serial.println(F("K")); } } else { Serial.print(pgm_read_byte(&(RAM[i + ramlo]))); Serial.println(F("K")); } } Serial.print(F("Enter RAM Size: ")); while (Serial.available() == 0) {} sizeRAM = Serial.readStringUntil('\n'); Serial.println(sizeRAM); newramsize = sizeRAM.toInt() + ramlo; if (newramsize > ramhi) { Serial.println(F("SIZE NOT SUPPORTED")); Serial.println(FSTRING_EMPTY); goto setram; } } if ((mapper == 16) || (mapper == 159)) { int sizeEEP = 0; Serial.print(F("EEPROM Size = ")); if (mapper == 16) sizeEEP = pgm_read_byte(&(RAM[newramsize])) * 32; else sizeEEP = pgm_read_byte(&(RAM[newramsize])) * 16; Serial.print(sizeEEP); Serial.println(F("B")); Serial.println(FSTRING_EMPTY); } else if (mapper == 19) { Serial.print(F("RAM Size = ")); if (newramsize == 2) Serial.println(F("128B")); else { Serial.print(pgm_read_byte(&(RAM[newramsize]))); Serial.println(F("K")); } Serial.println(FSTRING_EMPTY); } else if (mapper == 80) { Serial.print(F("RAM Size = ")); Serial.print(pgm_read_byte(&(RAM[newramsize])) * 16); Serial.println(F("B")); Serial.println(FSTRING_EMPTY); } else { Serial.print(F("RAM Size = ")); if (mapper == 0) Serial.print(newramsize * 2); else if (mapper == 82) Serial.print(newramsize * 5); else Serial.print(pgm_read_byte(&(RAM[newramsize]))); Serial.println(F("K")); Serial.println(FSTRING_EMPTY); } #endif EEPROM_writeAnything(10, newramsize); ramsize = newramsize; #ifdef ENABLE_GLOBAL_LOG // Enable log again dont_log = false; #endif } // MMC6 Detection // Mapper 4 includes both MMC3 AND MMC6 // RAM is mapped differently between MMC3 and MMC6 void checkMMC6() { // Detect MMC6 Carts - read PRG 0x3E00A ("STARTROPICS") write_prg_byte(0x8000, 6); // PRG Bank 0 ($8000-$9FFF) write_prg_byte(0x8001, 0x1F); // 0x3E000 prgchk0 = read_prg_byte(0x800A); prgchk1 = read_prg_byte(0x800B); prgchk2 = read_prg_byte(0x800C); prgchk3 = read_prg_byte(0x800D); if ((prgchk0 == 0x53) && (prgchk1 == 0x54) && (prgchk2 == 0x41) && (prgchk3 == 0x52)) mmc6 = true; // MMC6 Cart } void checkStatus_NES() { EEPROM_readAnything(7, mapper); EEPROM_readAnything(8, prgsize); EEPROM_readAnything(9, chrsize); EEPROM_readAnything(10, ramsize); prg = (int_pow(2, prgsize)) * 16; if (chrsize == 0) chr = 0; // 0K else chr = (int_pow(2, chrsize)) * 4; if (ramsize == 0) ram = 0; // 0K else if (mapper == 82) ram = 5; // 5K else ram = (int_pow(2, ramsize)) * 4; // Mapper Variants // Identify variant for use across multiple functions if (mapper == 4) { // Check for MMC6/MMC3 checkMMC6(); if (mmc6) ram = 1; // 1K } else if (mapper == 30) // Check for Flashable/Non-Flashable NESmaker_ID(); // Flash ID display_Clear(); println_Msg(F("NES CART READER")); println_Msg(FS(FSTRING_EMPTY)); println_Msg(F("CURRENT SETTINGS")); println_Msg(FS(FSTRING_EMPTY)); printNESSettings(); println_Msg(FS(FSTRING_EMPTY)); // Prints string out of the common strings array either with or without newline print_STR(press_button_STR, 1); display_Update(); wait(); } static void printNESSettings(void) { print_Msg(F("MAPPER: ")); println_Msg(mapper); print_Msg(F("PRG SIZE: ")); print_Msg(prg); println_Msg(F("K")); print_Msg(F("CHR SIZE: ")); print_Msg(chr); println_Msg(F("K")); print_Msg(F("RAM SIZE: ")); if (mapper == 0) { print_Msg(ram / 4); println_Msg(F("K")); } else if ((mapper == 16) || (mapper == 80) || (mapper == 159)) { if (mapper == 16) print_Msg(ram * 32); else print_Msg(ram * 16); println_Msg(F("B")); } else if (mapper == 19) { if (ramsize == 2) println_Msg(F("128B")); else { print_Msg(ram); println_Msg(F("K")); } } else { print_Msg(ram); println_Msg(F("K")); } } /****************************************** ROM Functions *****************************************/ void dumpPRG(word base, word address) { for (size_t x = 0; x < 512; x++) { sdBuffer[x] = read_prg_byte(base + address + x); } myFile.write(sdBuffer, 512); } void dumpCHR(word address) { for (size_t x = 0; x < 512; x++) { sdBuffer[x] = read_chr_byte(address + x); } myFile.write(sdBuffer, 512); } void dumpCHR_M2(word address) { // MAPPER 45 - PULSE M2 LO/HI for (size_t x = 0; x < 512; x++) { PHI2_LOW; sdBuffer[x] = read_chr_byte(address + x); } myFile.write(sdBuffer, 512); } void dumpMMC5RAM(word base, word address) { // MMC5 SRAM DUMP - PULSE M2 LO/HI for (size_t x = 0; x < 512; x++) { PHI2_LOW; sdBuffer[x] = read_prg_byte(base + address + x); } myFile.write(sdBuffer, 512); } void writeMMC5RAM(word base, word address) { // MMC5 SRAM WRITE myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { do { write_prg_byte(0x5102, 2); // PRG RAM PROTECT1 write_prg_byte(0x5103, 1); // PRG RAM PROTECT2 write_wram_byte(base + address + x, sdBuffer[x]); bytecheck = read_prg_byte(base + address + x); } while (bytecheck != sdBuffer[x]); // CHECK WRITTEN BYTE } write_prg_byte(0x5102, 0); // PRG RAM PROTECT1 write_prg_byte(0x5103, 0); // PRG RAM PROTECT2 } void readPRG(bool readrom) { if (!readrom) { display_Clear(); display_Update(); LED_BLUE_ON; set_address(0); _delay_us(1); CreatePRGFileInSD(); } else { set_address(0); _delay_us(1); } word base = 0x8000; bool busConflict = false; if (myFile) { switch (mapper) { case 0: case 3: case 13: case 87: // 16K/32K case 184: // 32K case 185: // 16K/32K for (size_t address = 0; address < (((word)prgsize) * 0x4000) + 0x4000; address += 512) { // 16K or 32K dumpPRG(base, address); } break; case 1: case 155: // 32K/64K/128K/256K/512K banks = int_pow(2, prgsize) - 1; for (size_t i = 0; i < banks; i++) { // 16K Banks ($8000-$BFFF) write_prg_byte(0x8000, 0x80); // Clear Register write_mmc1_byte(0x8000, 0x0C); // Switch 16K Bank ($8000-$BFFF) + Fixed Last Bank ($C000-$FFFF) if (prgsize > 4) // 512K write_mmc1_byte(0xA000, 0x00); // Reset 512K Flag for Lower 256K if (i > 15) // Switch Upper 256K write_mmc1_byte(0xA000, 0x10); // Set 512K Flag write_mmc1_byte(0xE000, i); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { // Final Bank ($C000-$FFFF) dumpPRG(base, address); } break; case 2: // bus conflicts - fixed last bank case 30: // bus conflicts in non-flashable configuration banks = int_pow(2, prgsize); busConflict = true; for (size_t i = 0; i < banks - 1; i++) { for (size_t x = 0; x < 0x4000; x++) { if (read_prg_byte(0xC000 + x) == i) { write_prg_byte(0xC000 + x, i); busConflict = false; break; } } if (busConflict) { write_prg_byte(0xC000 + i, i); } for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { dumpPRG(base, address); } break; case 4: case 47: case 64: case 118: case 119: case 158: banks = ((int_pow(2, prgsize) * 2)) - 2; // Set Number of Banks if (mapper == 47) write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable for (size_t i = 0; i < banks; i += 2) { // 32K/64K/128K/256K/512K if (mapper == 47) { if (i == 0) write_prg_byte(0x6000, 0); // Switch to Lower Block else if (i == 16) write_prg_byte(0x6000, 1); // Switch to Upper Block } write_prg_byte(0x8000, 6); // PRG Bank 0 ($8000-$9FFF) write_prg_byte(0x8001, i); write_prg_byte(0x8000, 7); // PRG Bank 1 ($A000-$BFFF) write_prg_byte(0x8001, i + 1); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } if ((mapper == 64) || (mapper == 158)) { write_prg_byte(0x8000, 15); // PRG Bank 2 ($C000-$DFFF) write_prg_byte(0x8001, banks); } for (size_t address = 0x4000; address < 0x8000; address += 512) { // Final 2 Banks ($C000-$FFFF) dumpPRG(base, address); } break; case 5: // 128K/256K/512K banks = int_pow(2, prgsize) * 2; write_prg_byte(0x5100, 3); // 8K PRG Banks for (size_t i = 0; i < banks; i += 2) { // 128K/256K/512K write_prg_byte(0x5114, i | 0x80); write_prg_byte(0x5115, (i + 1) | 0x80); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 7: // 128K/256K case 77: case 96: // 128K case 177: // up to 1024K case 241: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { // 32K Banks write_prg_byte(0x8000, i); for (size_t address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF) dumpPRG(base, address); } } break; case 9: // 128K for (size_t i = 0; i < 13; i++) { // 16-3 = 13 = 128K write_prg_byte(0xA000, i); // $8000-$9FFF for (size_t address = 0x0; address < 0x2000; address += 512) { // Switch Bank ($8000-$9FFF) dumpPRG(base, address); } } for (size_t address = 0x2000; address < 0x8000; address += 512) { // Final 3 Banks ($A000-$FFFF) dumpPRG(base, address); } break; case 10: // 128K/256K for (size_t i = 0; i < (unsigned)(((prgsize - 3) * 8) + 7); i++) { write_prg_byte(0xA000, i); // $8000-$BFFF for (size_t address = 0x0; address < 0x4000; address += 512) { // Switch Bank ($8000-$BFFF) dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { // Final Bank ($C000-$FFFF) dumpPRG(base, address); } break; case 11: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xFFB0 + i, i); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 15: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x8000, i); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 16: case 159: // 128K/256K banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6008, i); // Submapper 4 write_prg_byte(0x8008, i); // Submapper 5 for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 18: // 128K/256K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x8000, i & 0xF); write_prg_byte(0x8001, (i >> 4) & 0xF); write_prg_byte(0x8002, (i + 1) & 0xF); write_prg_byte(0x8003, ((i + 1) >> 4) & 0xF); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 19: // 128K/256K for (size_t j = 0; j < 64; j++) { // Init Register write_ram_byte(0xE000, 0); // PRG Bank 0 ($8000-$9FFF) } banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i++) { write_ram_byte(0xE000, i); // PRG Bank 0 ($8000-$9FFF) for (size_t address = 0x0; address < 0x2000; address += 512) { dumpPRG(base, address); } } break; case 21: // 256K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xA000, i); for (size_t address = 0x2000; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 22: case 25: case 65: case 75: // 128K/256K banks = int_pow(2, prgsize) * 2; // set vrc4 swap setting for TMNT2 if (mapper == 25) write_prg_byte(0x9005, 0x00); for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x8000, i); write_prg_byte(0xA000, i + 1); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 23: banks = int_pow(2, prgsize) * 2; write_prg_byte(0x9002, 0); write_prg_byte(0x9008, 0); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpPRG(base, address); } } break; case 24: case 26: // 256K case 78: // 128K banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { // 128K write_prg_byte(0x8000, i); for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 28: // using 32k mode for inner and outer banks, switching only with outer banks = int_pow(2, prgsize) / 2; write_prg_byte(0x5000, 0x81); write_prg_byte(0x8000, 0); write_prg_byte(0x5000, 0x80); write_prg_byte(0x8000, 0); write_prg_byte(0x5000, 0x01); write_prg_byte(0x8000, 0); write_prg_byte(0x5000, 0x00); write_prg_byte(0x8000, 0); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x5000, 0x81); write_prg_byte(0x8000, i); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 31: banks = int_pow(2, prgsize) * 4; for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0x5FF8, i); write_prg_byte(0x5FF9, i + 1); write_prg_byte(0x5FFA, i + 2); write_prg_byte(0x5FFB, i + 3); write_prg_byte(0x5FFC, i + 4); write_prg_byte(0x5FFD, i + 5); write_prg_byte(0x5FFE, i + 6); write_prg_byte(0x5FFF, i + 7); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 32: // 128K/256K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i++) { // 128K/256K write_prg_byte(0x9000, 1); // PRG Mode 0 - Read $A000-$BFFF to avoid difference between Modes 0 and 1 write_prg_byte(0xA000, i); // PRG Bank for (size_t address = 0x2000; address < 0x4000; address += 512) { // 8K Banks ($A000-$BFFF) dumpPRG(base, address); } } break; case 33: case 48: // 128K/256K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x8000, i); // PRG Bank 0 ($8000-$9FFF) write_prg_byte(0x8001, i + 1); // PRG Bank 1 ($A000-$BFFF) for (size_t address = 0x0; address < 0x4000; address += 512) { // 8K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 34: // BxROM/NINA banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x7FFD, i); // NINA Bank select write_prg_byte(0x8000, i); // BxROM bank select delay(200); // NINA seems slow to switch banks for (size_t address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF) dumpPRG(base, address); } } break; case 35: case 90: case 209: case 211: banks = int_pow(2, prgsize) * 2; write_prg_byte(0xD000, 0x02); for (uint8_t i = 0; i < banks; i++) { write_prg_byte(0xD003, (((i >> 5) & 0x06) | 0x20)); write_prg_byte(0x8000, (i & 0x3f)); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpPRG(base, address); } } break; case 36: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xFFA0 + i, (i << 4)); write_prg_byte(0x4101, 0); write_prg_byte(0x4102, (i << 4)); write_prg_byte(0x4103, 0); write_prg_byte(0x4100, 0); write_prg_byte(0x4103, 0xFF); write_prg_byte(0xFFFF, 0xFF); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 37: banks = ((int_pow(2, prgsize) * 2)) - 2; // Set Number of Banks write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable for (size_t i = 0; i < banks; i += 2) { // 256K if (i == 0) write_prg_byte(0x6000, 0); // Switch to Lower Block ($0000-$FFFF) else if (i == 8) write_prg_byte(0x6000, 3); // Switch to 2nd 64K Block ($10000-$1FFFF) else if (i == 16) write_prg_byte(0x6000, 4); // Switch to 128K Block ($20000-$3FFFF) write_prg_byte(0x8000, 6); // PRG Bank 0 ($8000-$9FFF) write_prg_byte(0x8001, i); write_prg_byte(0x8000, 7); // PRG Bank 1 ($A000-$BFFF) write_prg_byte(0x8001, i + 1); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { // Final 2 Banks ($C000-$FFFF) dumpPRG(base, address); } break; case 38: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x7000, i); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 42: banks = int_pow(2, prgsize) * 2; base = 0x6000; // 8k switchable PRG ROM bank at $6000-$7FFF for (size_t i = 0; i < banks - 4; i++) { write_prg_byte(0xE000, i & 0x0F); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpPRG(base, address); } } base = 0x8000; // last 32k fixed to $8000-$FFFF for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } break; case 45: // MMC3 Clone with Outer Registers banks = ((int_pow(2, prgsize) * 2)) - 2; // Set Number of Banks for (size_t i = 0; i < banks; i += 2) { // 128K/256K/512K/1024K // set outer bank registers write_prg_byte(0x6000, 0x00); // CHR-OR write_prg_byte(0x6000, (i & 0xC0)); // PRG-OR write_prg_byte(0x6000, ((i >> 2) & 0xC0)); // CHR-AND,CHR-OR/PRG-OR write_prg_byte(0x6000, 0x80); // PRG-AND // set inner bank registers write_prg_byte(0x8000, 6); // PRG Bank 0 ($8000-$9FFF) write_prg_byte(0x8001, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpPRG(base, address); } // set outer bank registers write_prg_byte(0x6000, 0x00); // CHR-OR write_prg_byte(0x6000, ((i + 1) & 0xC0)); // PRG-OR write_prg_byte(0x6000, (((i + 1) >> 2) & 0xC0)); // CHR-AND,CHR-OR/PRG-OR write_prg_byte(0x6000, 0x80); // PRG-AND // set inner bank registers write_prg_byte(0x8000, 7); // PRG Bank 1 ($A000-$BFFF) write_prg_byte(0x8001, i + 1); for (size_t address = 0x2000; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { // Final 2 Banks ($C000-$FFFF) dumpPRG(base, address); } break; case 46: banks = int_pow(2, prgsize) / 2; // 32k banks for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6000, (i & 0x1E) >> 1); // high bits write_prg_byte(0x8000, i & 0x01); // low bit for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 52: banks = int_pow(2, prgsize); write_prg_byte(0xA001, 0x80); // enable WRAM write for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6000, (i & 0x07) | 0x08); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 56: banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xE000, 1); write_prg_byte(0xF000, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpPRG(base, address); } } break; case 57: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8800, (i & 0x07) << 5); write_prg_byte(0x8000, 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 58: case 213: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i & 0x07), 0x00); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 59: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte((0x8000 + (i & 0x07)) << 4 | 0x80, 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 60: for (size_t address = 0; address < 0x4000; address += 512) { dumpPRG(base, address); } for (size_t i = 0; i < 3; i++) { write_prg_byte(0x8D8D, i); delay(500); for (size_t address = 0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 62: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i * 512) + ((i & 32) << 1), 0x00); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 66: // 64K/128K banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { // 64K/128K write_prg_byte(0x8000, i << 4); // bits 4-5 for (size_t address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF) dumpPRG(base, address); } } break; case 63: // 3072K total banks = int_pow(2, prgsize); for (size_t i = 0; i < 192; i++) { write_prg_byte(0x8000 + (i << 2), 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 67: // 128K banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { // 128K write_reg_byte(0xF800, i); // [WRITE RAM SAFE] for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 68: case 73: // 128K banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { // 128K write_prg_byte(0xF000, i); for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 69: // 128K/256K banks = int_pow(2, prgsize) * 2; write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0 write_prg_byte(0xA000, 0); // Parameter Register - PRG RAM Disabled, PRG ROM, Bank 0 to $6000-$7FFF for (size_t i = 0; i < banks; i++) { // 128K/256K write_prg_byte(0x8000, 9); // Command Register - PRG Bank 1 write_prg_byte(0xA000, i); // Parameter Register - ($8000-$9FFF) for (size_t address = 0x0000; address < 0x2000; address += 512) { // 8K Banks ($8000-$9FFF) dumpPRG(base, address); } } break; case 70: case 89: case 152: // 64K/128K banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { // 128K write_prg_byte(0x8000, i << 4); for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 71: // 64K/128K/256K banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0xC000, i); for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 72: // 128K banks = int_pow(2, prgsize); write_prg_byte(0x8000, 0); // Reset Register for (size_t i = 0; i < banks; i++) { // 128K write_prg_byte(0x8000, i | 0x80); // PRG Command + Bank write_prg_byte(0x8000, i); // PRG Bank for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 76: case 88: case 95: case 154: // 128K case 206: // 32/64/128K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks - 2; i += 2) { write_prg_byte(0x8000, 6); write_prg_byte(0x8001, i); write_prg_byte(0x8000, 7); write_prg_byte(0x8001, i | 1); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { dumpPRG(base, address); } break; case 79: case 146: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x4100, i << 3); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 80: // 128K case 207: // 256K [CART SOMETIMES NEEDS POWERCYCLE] banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x7EFA, i); // PRG Bank 0 ($8000-$9FFF) write_prg_byte(0x7EFC, i + 1); // PRG Bank 1 ($A000-$BFFF) for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 82: // 128K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x7EFA, i << 2); // PRG Bank 0 ($8000-$9FFF) write_prg_byte(0x7EFB, (i + 1) << 2); // PRG Bank 1 ($A000-$BFFF) for (size_t address = 0x0; address < 0x4000; address += 512) { // 8K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 85: // 128K/512K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000, i); // PRG Bank 0 ($8000-$9FFF) for (size_t address = 0x0; address < 0x2000; address += 512) { // 8K Banks ($8000-$9FFF) dumpPRG(base, address); } } break; case 86: case 140: // 128K banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { // 128K write_prg_byte(0x6000, i << 4); // bits 4-5 for (size_t address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF) dumpPRG(base, address); } } break; case 91: banks = int_pow(2, prgsize); for (size_t i = 0; i < (banks - 2); i += 2) { write_prg_byte(0x7000, (i | 0)); write_prg_byte(0x7001, (i | 1)); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { dumpPRG(base, address); } break; case 92: // 256K banks = int_pow(2, prgsize); write_prg_byte(0x8000, 0); // Reset Register for (size_t i = 0; i < banks; i++) { // 256K write_prg_byte(0x8000, i | 0x80); // PRG Command + Bank write_prg_byte(0x8000, i); // PRG Bank for (size_t address = 0x4000; address < 0x8000; address += 512) { // 16K Banks ($C000-$FFFF) dumpPRG(base, address); } } break; case 93: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6000, i); write_prg_byte(0x8000, i << 4 | 0x01); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 94: // bus conflicts - fixed last bank banks = int_pow(2, prgsize); busConflict = true; for (size_t i = 0; i < banks - 1; i++) { for (size_t x = 0; x < 0x4000; x++) { if (read_prg_byte(0xC000 + x) == (i << 2)) { write_prg_byte(0xC000 + x, i << 2); busConflict = false; break; } } if (busConflict) { write_prg_byte(0x8000 + i, i << 2); } for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { dumpPRG(base, address); } break; case 97: // fixed first bank case 180: // bus conflicts - fixed fist bank banks = int_pow(2, prgsize); busConflict = true; for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } for (size_t i = 1; i < banks; i++) { for (size_t x = 0; x < 0x4000; x++) { if (read_prg_byte(0x8000 + x) == i) { write_prg_byte(0x8000 + x, i); busConflict = false; break; } } if (busConflict) { write_prg_byte(0x8000 + i, i); } for (size_t address = 0x4000; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 105: // 256K write_mmc1_byte(0xA000, 0x00); // Clear PRG Init/IRQ (Bit 4) write_mmc1_byte(0xA000, 0x10); // Set PRG Init/IRQ (Bit 4) to enable bank swapping for (size_t i = 0; i < 4; i++) { // PRG CHIP 1 128K write_mmc1_byte(0xA000, i << 1); for (size_t address = 0x0; address < 0x8000; address += 512) { // 32K Banks ($8000-$FFFF) dumpPRG(base, address); } } write_mmc1_byte(0x8000, 0x0C); // Switch 16K Bank ($8000-$BFFF) + Fixed Last Bank ($C000-$FFFF) write_mmc1_byte(0xA000, 0x08); // Select PRG CHIP 2 (Bit 3) for (size_t j = 0; j < 8; j++) { // PRG CHIP 2 128K write_mmc1_byte(0xE000, j); for (size_t address = 0x0; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 111: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x5000, i); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 113: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x4100, (i & 0x07) << 3); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 114: // Submapper 0 banks = int_pow(2, prgsize) * 2; write_prg_byte(0x6000, 0); for (size_t i = 0; i < banks; i++) { write_prg_byte(0xA000, 4); write_prg_byte(0xC000, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpPRG(base, address); } } break; case 126: banks = int_pow(2, prgsize) * 2; write_prg_byte(0xA001, 0x80); // enable WRAM write_prg_byte(0x6003, 0x00); // set MMC3 banking mode for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x6000, (i & 0x180) >> 3 | (i & 0x70) >> 4); // select outer bank write_prg_byte(0x8000, 6); // 8k bank 0 at $8000 write_prg_byte(0x8001, i); write_prg_byte(0x8000, 7); // 8k bank 1 at $A000 write_prg_byte(0x8001, i + 1); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 134: banks = int_pow(2, prgsize) * 2; write_prg_byte(0x6000, 0x00); // set MMC3 banking mode for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x6001, (i & 0x30) >> 4); // select outer bank write_prg_byte(0x8000, 6); // 8k bank 0 at $8000 write_prg_byte(0x8001, i); write_prg_byte(0x8000, 7); // 8k bank 1 at $A000 write_prg_byte(0x8001, i + 1); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 142: banks = int_pow(2, prgsize) * 2; base = 0x6000; // 4x 8k switchable PRG ROM banks at $6000-$DFFF for (size_t i = 0; i < banks; i += 4) { write_prg_byte(0xE000, 4); // Select 8 KB PRG bank at CPU $6000-$7FFF write_prg_byte(0xF000, i); write_prg_byte(0xE000, 1); // Select 8 KB PRG bank at CPU $8000-$9FFF write_prg_byte(0xF000, i + 1); write_prg_byte(0xE000, 2); // Select 8 KB PRG bank at CPU $A000-$BFFF write_prg_byte(0xF000, i + 2); write_prg_byte(0xE000, 3); // Select 8 KB PRG bank at CPU $C000-$DFFF write_prg_byte(0xF000, i + 3); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 148: // Sachen SA-008-A and Tengen 800008 -- Bus conflicts banks = int_pow(2, prgsize) / 2; busConflict = true; for (size_t i = 0; i < banks; i++) { for (size_t x = 0; x < 0x8000; x++) { if (read_prg_byte(0x8000 + x) == i) { write_prg_byte(0x8000 + x, i << 3); busConflict = false; break; } } if (busConflict) { write_prg_byte(0x8000 + i, i << 3); } for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 153: // 512K banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { // 512K write_prg_byte(0x8000, i >> 4); // PRG Outer Bank (Documentation says duplicate over $8000-$8003 registers) write_prg_byte(0x8001, i >> 4); // PRG Outer Bank write_prg_byte(0x8002, i >> 4); // PRG Outer Bank write_prg_byte(0x8003, i >> 4); // PRG Outer Bank write_prg_byte(0x8008, i & 0xF); // PRG Inner Bank for (size_t address = 0x0000; address < 0x4000; address += 512) { // 16K Banks ($8000-$BFFF) dumpPRG(base, address); } } break; case 157: for (size_t i = 0; i < 15; i++) { write_prg_byte(0x8008, i); // select 16k bank at $8000-$BFFF for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { // last 16k bank fixed at $C000-$FFFF dumpPRG(base, address); } break; case 162: banks = int_pow(2, prgsize) / 2; write_prg_byte(0x5300, 0x07); // A16-A15 controlled by $5000 for (size_t i = 0; i < banks; i++) { write_prg_byte(0x5200, (i & 0x30) >> 4); // A20-A19 write_prg_byte(0x5000, i & 0x0F); // A18-A15 for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 163: banks = int_pow(2, prgsize) / 2; write_prg_byte(0x5300, 0x04); // disable bit swap on writes to $5000-$5200 for (size_t i = 0; i < banks; i++) { write_prg_byte(0x5200, (i & 0x30) >> 4); // A20-A19 write_prg_byte(0x5000, i & 0x0F); // A18-A15 for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 174: // 128k for (size_t i = 0; i < 8; i++) { write_prg_byte(0xFF00 + (i << 4), 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 176: banks = int_pow(2, prgsize) * 2; write_prg_byte(0x5FF3, 0); // extended MMC3 mode: disabled write_prg_byte(0x5FF0, 1); // 256K outer bank mode for (size_t i = 0; i < banks - 3; i += 2) { write_prg_byte(0x5FF1, (i & 0xE0) >> 1); // outer bank select write_prg_byte(0x8000, 6); write_prg_byte(0x8001, i); write_prg_byte(0x8000, 7); write_prg_byte(0x8001, i + 1); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t address = 0x4000; address < 0x8000; address += 512) { dumpPRG(base, address); } break; case 178: banks = int_pow(2, prgsize); write_prg_byte(0x4800, 0); // NROM-256 mode write_prg_byte(0x4803, 0); // set PRG-RAM for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x4802, i >> 3); // high PRG (up to 8 bits?!) write_prg_byte(0x4801, i & 0x07); // low PRG (3 bits) for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 200: case 212: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i & 0x07), 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 201: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i & 0xFF), 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 202: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 | (i << 1), 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 203: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000, (i & 0x1F) << 2); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 210: // 128K/256K banks = int_pow(2, prgsize) * 2; for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0xE000, i); // PRG Bank 0 ($8000-$9FFF) [WRITE NO RAM] write_prg_byte(0xE800, i + 1); // PRG Bank 1 ($A000-$BFFF) [WRITE NO RAM] for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 214: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 | (i << 2), 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 225: case 255: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x8000 + (((i & 0x40) << 8) | ((i & 0x3F) << 6)), 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 226: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x8001, (i & 0x40) >> 6); write_prg_byte(0x8000, ((i & 0x20) << 2) | (i & 0x1F)); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 227: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8083 + ((i & 0xF) << 3), 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 228: banks = int_pow(2, prgsize); write_prg_byte(0x8000, 0); for (size_t i = 0; i < banks; i += 2) { // up to 1024k PRG write_prg_byte(0x8000 + ((i & 0x3F) << 6), 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } if (prgsize > 5) { // reading the 3rd 512k PRG chip (Action 52) for (size_t i = 0; i < 32; i += 2) { write_prg_byte(0x9800 + ((i & 0x1F) << 6), 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } } break; case 229: write_prg_byte(0x8000, 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } for (size_t i = 2; i < 32; i++) { write_prg_byte(0x8000 + i, i); for (size_t address = 0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 232: banks = int_pow(2, prgsize) / 4; for (size_t outerbank = 0; outerbank < 4; outerbank++) { write_prg_byte(0x8000, outerbank << 3); for (size_t i = 0; i < banks; i++) { write_prg_byte(0xC000, i); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } } break; case 235: for (size_t i = 0; i < 32; i++) { write_prg_byte(0x8000 + i, 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } if (prgsize > 6) { for (size_t i = 32; i < 64; i++) { write_prg_byte(0x80E0 + i, 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } if (prgsize > 7) { for (size_t i = 64; i < 96; i++) { write_prg_byte(0x81E0 + i, 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } for (size_t i = 96; i < 128; i++) { write_prg_byte(0x82E0 + i, 0); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } } } break; case 236: banks = int_pow(2, prgsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 | ((i & 0x38) >> 3), 0); // A19-A17 write_prg_byte(0xC030 | (i & 0x0F), 0); // A17-A14 for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 240: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x5FFF, (i & 0xF) << 4); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; case 242: // total size is 640k THIS IS NORMAL for (size_t i = 0; i < 32; i++) { // dump 1st chip of 512k write_prg_byte(0x8400 + (i * 4), 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } for (size_t i = 0; i < 8; i++) { // dump 2nd chip of 128k write_prg_byte(0x8000 + (i * 4), 0); for (size_t address = 0x0; address < 0x4000; address += 512) { dumpPRG(base, address); } } break; case 246: banks = int_pow(2, prgsize) / 2; for (size_t i = 0; i < banks; i += 4) { write_prg_byte(0x6000, (i | 0)); write_prg_byte(0x6001, (i | 1)); write_prg_byte(0x6002, (i | 2)); write_prg_byte(0x6003, (i | 3)); for (size_t address = 0x0; address < 0x8000; address += 512) { dumpPRG(base, address); } } break; } if (!readrom) { myFile.flush(); myFile.close(); println_Msg(F("PRG FILE DUMPED!")); println_Msg(FS(FSTRING_EMPTY)); display_Update(); } } set_address(0); PHI2_HI; ROMSEL_HI; LED_BLUE_OFF; } void readCHR(bool readrom) { if (!readrom) { display_Clear(); display_Update(); } LED_GREEN_ON; set_address(0); _delay_us(1); if (chrsize == 0) { println_Msg(F("CHR SIZE 0K")); display_Update(); } else { if (!readrom) { CreateCHRFileInSD(); } if (myFile) { switch (mapper) { case 0: // 8K for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } break; case 1: case 155: banks = int_pow(2, chrsize); for (size_t i = 0; i < banks; i += 2) { // 8K/16K/32K/64K/128K (Bank #s are based on 4K Banks) write_prg_byte(0x8000, 0x80); // Clear Register write_mmc1_byte(0xA000, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 3: // 8K/16K/32K - bus conflicts case 148: // Sachen SA-008-A and Tengen 800008 - Bus conflicts banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { for (size_t x = 0; x < 0x8000; x++) { if (read_prg_byte(0x8000 + x) == i) { write_prg_byte(0x8000 + x, i); break; } } for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 4: case 47: case 64: case 118: case 119: case 158: banks = int_pow(2, chrsize) * 4; if (mapper == 47) write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable for (size_t i = 0; i < banks; i += 4) { // 8K/16K/32K/64K/128K/256K if (mapper == 47) { if (i == 0) write_prg_byte(0x6000, 0); // Switch to Lower Block else if (i == 128) write_prg_byte(0x6000, 1); // Switch to Upper Block } write_prg_byte(0x8000, 0); // CHR Bank 0 ($0000-$07FF) write_prg_byte(0x8001, i); write_prg_byte(0x8000, 1); // CHR Bank 1 ($0800-$0FFF) write_prg_byte(0x8001, i + 2); for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 5: // 128K/256K/512K banks = int_pow(2, chrsize) / 2; write_prg_byte(0x5101, 0); // 8K CHR Banks for (size_t i = 0; i < banks; i++) { if (i == 0) write_prg_byte(0x5130, 0); // Set Upper 2 bits else if (i == 8) write_prg_byte(0x5130, 1); // Set Upper 2 bits else if (i == 16) write_prg_byte(0x5130, 2); // Set Upper 2 bits else if (i == 24) write_prg_byte(0x5130, 3); // Set Upper 2 bits write_prg_byte(0x5127, i); for (size_t address = 0x0; address < 0x2000; address += 512) { // ($0000-$1FFF) dumpCHR(address); } } break; case 9: case 10: // Mapper 9: 128K, Mapper 10: 64K/128K if (mapper == 9) banks = 32; else // Mapper 10 banks = int_pow(2, chrsize); for (size_t i = 0; i < banks; i++) { // 64K/128K write_prg_byte(0xB000, i); write_prg_byte(0xC000, i); for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 11: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xFFB0 + i, i << 4); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 16: case 159: // 128K/256K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6000, i); // Submapper 4 write_prg_byte(0x8000, i); // Submapper 5 for (size_t address = 0x0; address < 0x400; address += 512) { dumpCHR(address); } } break; case 18: // 128K/256K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xA000, i & 0xF); // CHR Bank Lower 4 bits write_prg_byte(0xA001, (i >> 4) & 0xF); // CHR Bank Upper 4 bits for (size_t address = 0x0; address < 0x400; address += 512) { dumpCHR(address); } } break; case 19: // 128K/256K for (size_t j = 0; j < 64; j++) { // Init Register write_ram_byte(0xE800, 0xC0); // CHR RAM High/Low Disable (ROM Enable) } banks = int_pow(2, chrsize) * 4; write_ram_byte(0xE800, 0xC0); // CHR RAM High/Low Disable (ROM Enable) for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0x8000, i); // CHR Bank 0 write_prg_byte(0x8800, i + 1); // CHR Bank 1 write_prg_byte(0x9000, i + 2); // CHR Bank 2 write_prg_byte(0x9800, i + 3); // CHR Bank 3 write_prg_byte(0xA000, i + 4); // CHR Bank 4 write_prg_byte(0xA800, i + 5); // CHR Bank 5 write_prg_byte(0xB000, i + 6); // CHR Bank 6 write_prg_byte(0xB800, i + 7); // CHR Bank 7 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 21: // 128K/256K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xB000, i & 0xF); // CHR Bank Lower 4 bits if (chrsize == 5) // Check CHR Size to determine VRC4a (128K) or VRC4c (256K) write_prg_byte(0xB002, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC4a (Wai Wai World 2) else // banks == 256 write_prg_byte(0xB040, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC4c (Ganbare Goemon Gaiden 2) for (size_t address = 0x0; address < 0x400; address += 512) { dumpCHR(address); } } break; case 22: // 128K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xB000, (i << 1) & 0xF); // CHR Bank Lower 4 bits write_prg_byte(0xB002, (i >> 3) & 0xF); // CHR Bank Upper 4 bits for (size_t address = 0x0; address < 0x400; address += 512) { dumpCHR(address); } } break; case 23: // 128K // Detect VRC4e Carts - read PRG 0x1FFF6 (DATE) // Boku Dracula-kun = 890810, Tiny Toon = 910809 // Crisis Force = 910701, Parodius Da! = 900916 write_prg_byte(0x8000, 15); prgchk0 = read_prg_byte(0x9FF6); if (prgchk0 == 0x30) { // Check for "0" in middle of date vrc4e = true; // VRC4e Cart } banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xB000, i & 0xF); // CHR Bank Lower 4 bits if (vrc4e == true) write_prg_byte(0xB004, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC4e else write_prg_byte(0xB001, (i >> 4) & 0xF); // CHR Bank Upper 4 bits VRC2b/VRC4f for (size_t address = 0x0; address < 0x400; address += 512) { dumpCHR(address); } } break; case 24: // 128K banks = int_pow(2, chrsize) * 4; write_prg_byte(0xB003, 0); // PPU Banking Mode 0 for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0xD000, i); // CHR Bank 0 write_prg_byte(0xD001, i + 1); // CHR Bank 1 write_prg_byte(0xD002, i + 2); // CHR Bank 2 write_prg_byte(0xD003, i + 3); // CHR Bank 3 write_prg_byte(0xE000, i + 4); // CHR Bank 4 [WRITE NO RAM] write_prg_byte(0xE001, i + 5); // CHR Bank 5 [WRITE NO RAM] write_prg_byte(0xE002, i + 6); // CHR Bank 6 [WRITE NO RAM] write_prg_byte(0xE003, i + 7); // CHR Bank 7 [WRITE NO RAM] for (size_t address = 0x0; address < 0x2000; address += 512) { // 1K Banks dumpCHR(address); } } break; case 25: // 128K/256K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xB000, i & 0xF); // CHR Bank Lower 4 bits write_prg_byte(0xB00A, (i >> 4) & 0xF); // Combine VRC2c and VRC4b, VRC4d reg for (size_t address = 0x0; address < 0x400; address += 512) { dumpCHR(address); } } break; case 26: // 128K/256K banks = int_pow(2, chrsize) * 4; write_prg_byte(0xB003, 0x00); for (size_t i = 0; i < banks; i += 4) { write_prg_byte(0xD000, i + 0); // CHR Bank 0 write_prg_byte(0xD002, i + 1); // CHR Bank 1 write_prg_byte(0xD001, i + 2); // CHR Bank 2 write_prg_byte(0xD003, i + 3); // CHR Bank 3 for (size_t address = 0x0; address < 0x1000; address += 512) { // 1K Banks dumpCHR(address); } } break; case 32: // 128K case 65: // 128K/256K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0xB000, i); // CHR Bank 0 write_prg_byte(0xB001, i + 1); // CHR Bank 1 write_prg_byte(0xB002, i + 2); // CHR Bank 2 write_prg_byte(0xB003, i + 3); // CHR Bank 3 write_prg_byte(0xB004, i + 4); // CHR Bank 4 write_prg_byte(0xB005, i + 5); // CHR Bank 5 write_prg_byte(0xB006, i + 6); // CHR Bank 6 write_prg_byte(0xB007, i + 7); // CHR Bank 7 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 33: // 128K/256K case 48: // 256K banks = int_pow(2, chrsize) * 2; for (size_t i = 0; i < banks; i += 2) { // 2K Banks write_prg_byte(0x8002, i); // CHR Bank 0 write_prg_byte(0x8003, i + 1); // CHR Bank 1 for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 34: // NINA banks = int_pow(2, chrsize); for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x7FFE, i); // Select 4 KB CHR bank at $0000 write_prg_byte(0x7FFF, i + 1); // Select 4 KB CHR bank at $1000 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 35: case 90: case 209: case 211: banks = int_pow(2, chrsize) / 2; write_prg_byte(0xD000, 0x02); for (size_t i = 0; i < banks; i++) { write_prg_byte(0xD003, (((i >> 3) & 0x18) | 0x20)); write_prg_byte(0x9000, (i & 0x3f)); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 36: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x4200, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 37: banks = int_pow(2, chrsize) * 4; write_prg_byte(0xA001, 0x80); // Block Register - PRG RAM Chip Enable, Writable for (size_t i = 0; i < banks; i += 4) { // 256K if (i == 0) write_prg_byte(0x6000, 0); // Switch to Lower Block ($00000-$1FFFF) else if (i == 128) write_prg_byte(0x6000, 4); // Switch to Upper Block ($20000-$3FFFF) write_prg_byte(0x8000, 0); // CHR Bank 0 ($0000-$07FF) write_prg_byte(0x8001, i); write_prg_byte(0x8000, 1); // CHR Bank 1 ($0800-$0FFF) write_prg_byte(0x8001, i + 2); for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 38: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x7000, i << 2); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 42: banks = int_pow(2, chrsize); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000, i & 0x0F); for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 45: // 128K/256K/512K/1024K banks = int_pow(2, chrsize) * 4; write_prg_byte(0xA001, 0x80); // Unlock Write Protection - not used by some carts for (size_t i = 0; i < banks; i++) { // set outer bank registers write_prg_byte(0x6000, 0x00); // CHR-OR write_prg_byte(0x6000, 0x00); // PRG-OR write_prg_byte(0x6000, (((i / 256) << 4) | 0x0F)); // CHR-AND,CHR-OR/PRG-OR write_prg_byte(0x6000, 0x80); // PRG-AND // set inner bank registers write_prg_byte(0x8000, 0x2); // CHR Bank 2 ($1000-$13FF) write_prg_byte(0x8001, i); for (size_t address = 0x1000; address < 0x1200; address += 512) { dumpCHR_M2(address); // Read CHR with M2 Pulse } // set outer bank registers write_prg_byte(0x6000, 0x00); // CHR-OR write_prg_byte(0x6000, 0x00); // PRG-OR write_prg_byte(0x6000, (((i / 256) << 4) | 0x0F)); // CHR-AND,CHR-OR/PRG-OR write_prg_byte(0x6000, 0x80); // PRG-AND // set inner bank registers write_prg_byte(0x8000, 0x2); // CHR Bank 2 ($1000-$13FF) write_prg_byte(0x8001, i); for (size_t address = 0x1200; address < 0x1400; address += 512) { dumpCHR_M2(address); // Read CHR with M2 Pulse } } break; case 46: banks = int_pow(2, chrsize); // 8k banks for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6000, (i & 0x78) << 1); // high bits write_prg_byte(0x8000, (i & 0x07) << 4); // low bits for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 52: banks = int_pow(2, chrsize); write_prg_byte(0xA001, 0x80); // enable WRAM write for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6000, (i & 0x04) << 2 | (i & 0x03) << 4 | 0x40); for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 56: banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0xFC00, i); for (size_t address = 0x0; address < 0x400; address += 512) { dumpCHR(address); } } break; case 57: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8800, i & 0x07); // A15-A13 write_prg_byte(0x8000, 0x80 | ((i & 0x08) << 3)); // A16 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 58: case 213: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + ((i & 0x07) << 3), 0x00); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 59: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i & 0x07), 0); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 60: for (size_t i = 0; i < 4; i++) { write_prg_byte(0x8D8D, i); delay(500); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 62: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i / 4), i & 3); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 66: // 16K/32K case 70: case 152: // 128K banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { // 8K Banks write_prg_byte(0x8000, i); // CHR Bank 0 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 67: // 128K banks = int_pow(2, chrsize) * 2; for (size_t i = 0; i < banks; i += 4) { // 2K Banks write_prg_byte(0x8800, i); // CHR Bank 0 write_prg_byte(0x9800, i + 1); // CHR Bank 1 write_prg_byte(0xA800, i + 2); // CHR Bank 2 write_prg_byte(0xB800, i + 3); // CHR Bank 3 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 68: // 128K/256K banks = int_pow(2, chrsize) * 2; for (size_t i = 0; i < banks; i += 4) { // 2K Banks write_prg_byte(0x8000, i); // CHR Bank 0 write_prg_byte(0x9000, i + 1); // CHR Bank 1 write_prg_byte(0xA000, i + 2); // CHR Bank 2 write_prg_byte(0xB000, i + 3); // CHR Bank 3 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 69: // 128K/256K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000, 0); // Command Register - CHR Bank 0 write_prg_byte(0xA000, i); // Parameter Register - ($0000-$03FF) for (size_t address = 0x0; address < 0x400; address += 512) { // 1K Banks dumpCHR(address); } } break; case 72: // 128K banks = int_pow(2, chrsize) / 2; write_prg_byte(0x8000, 0); // Reset Register for (size_t i = 0; i < banks; i++) { // 8K Banks write_prg_byte(0x8000, i | 0x40); // CHR Command + Bank write_prg_byte(0x8000, i); // CHR Bank for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 75: // 128K banks = int_pow(2, chrsize); for (size_t i = 0; i < banks; i++) { // 4K Banks write_reg_byte(0xE000, i); // CHR Bank Low Bits [WRITE RAM SAFE] write_prg_byte(0x9000, (i & 0x10) >> 3); // High Bit for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 76: // 128K banks = int_pow(2, chrsize) * 2; for (size_t i = 0; i < banks; i += 2) { // 2K Banks write_prg_byte(0x8000, 2); // CHR Command ($0000-$07FF) 2K Bank write_prg_byte(0x8001, i); // CHR Bank write_prg_byte(0x8000, 3); // CHR Command ($0800-$0FFF) 2K Bank write_prg_byte(0x8001, i + 1); // CHR Bank for (size_t address = 0x0000; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 77: // 32K banks = int_pow(2, chrsize) * 2; for (size_t i = 0; i < banks; i++) { // 2K Banks write_prg_byte(0x8000, i << 4); // CHR Bank 0 for (size_t address = 0x0; address < 0x800; address += 512) { dumpCHR(address); } } break; case 78: // 128K banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { // 8K Banks write_prg_byte(0x8000, i << 4); // CHR Bank 0 for (size_t address = 0x0; address < 0x2000; address += 512) { // 8K Banks ($0000-$1FFF) dumpCHR(address); } } break; case 79: case 146: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x4100, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 80: // 128K/256K case 82: // 128K/256K case 207: // 128K [CART SOMETIMES NEEDS POWERCYCLE] banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i += 4) { write_prg_byte(0x7EF2, i); // CHR Bank 2 [REGISTERS 0x7EF0/0x7EF1 WON'T WORK] write_prg_byte(0x7EF3, i + 1); // CHR Bank 3 write_prg_byte(0x7EF4, i + 2); // CHR Bank 4 write_prg_byte(0x7EF5, i + 3); // CHR Bank 5 for (size_t address = 0x1000; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 85: // 128K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0xA000, i); // CHR Bank 0 write_prg_byte(0xA008, i + 1); // CHR Bank 1 write_prg_byte(0xB000, i + 2); // CHR Bank 2 write_prg_byte(0xB008, i + 3); // CHR Bank 3 write_prg_byte(0xC000, i + 4); // CHR Bank 4 write_prg_byte(0xC008, i + 5); // CHR Bank 5 write_prg_byte(0xD000, i + 6); // CHR Bank 6 write_prg_byte(0xD008, i + 7); // CHR Bank 7 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 86: // 64K banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { // 8K Banks if (i < 4) write_prg_byte(0x6000, i & 0x3); else write_prg_byte(0x6000, (i | 0x40) & 0x43); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 87: // 16K/32K banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { // 16K/32K write_prg_byte(0x6000, (((i & 0x1) << 1) | ((i & 0x2) >> 1))); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 88: // 128K case 95: // 32K case 154: // 128K case 206: // 16K/32K/64K banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i += 2) { // 1K Banks if (i < 64) { write_prg_byte(0x8000, 0); // CHR Command ($0000-$07FF) 2K Bank write_prg_byte(0x8001, i & 0x3F); // CHR Bank for (size_t address = 0x0; address < 0x800; address += 512) { dumpCHR(address); } } else { write_prg_byte(0x8000, 2); // CHR Command ($1000-$13FF) 1K Bank write_prg_byte(0x8001, i); // CHR Bank write_prg_byte(0x8000, 3); // CHR Command ($1400-$17FF) 1K Bank write_prg_byte(0x8001, i + 1); // CHR Bank for (size_t address = 0x1000; address < 0x1800; address += 512) { dumpCHR(address); } } } break; case 89: // 128K banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { // 8K Banks if (i < 8) write_prg_byte(0x8000, i & 0x7); else write_prg_byte(0x8000, (i | 0x80) & 0x87); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 91: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0x6000, (i / 2) | 0); write_prg_byte(0x6001, (i / 2) | 1); write_prg_byte(0x6002, (i / 2) | 2); write_prg_byte(0x6003, (i / 2) | 3); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 92: // 128K banks = int_pow(2, chrsize) / 2; write_prg_byte(0x8000, 0); // Reset Register for (size_t i = 0; i < banks; i++) { // 8K Banks write_prg_byte(0x8000, i | 0x40); // CHR Command + Bank write_prg_byte(0x8000, i); // CHR Bank for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 113: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x4100, (i & 0x08) << 3 | (i & 0x07)); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 114: // Submapper 0 banks = int_pow(2, chrsize) * 4; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x6000, (i & 0x80) >> 7); write_prg_byte(0xA000, 6); write_prg_byte(0xC000, i); for (size_t address = 0x1000; address < 0x1400; address += 512) { dumpCHR(address); } } break; case 126: banks = int_pow(2, chrsize) * 2; write_prg_byte(0xA001, 0x80); // enable WRAM write_prg_byte(0x6003, 0x00); // set MMC3 banking mode for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x6000, (i & 0x200) >> 5 | (i & 0x100) >> 3); // select outer bank write_prg_byte(0x8000, 0); // 2k bank 0 at $0000 write_prg_byte(0x8001, i); write_prg_byte(0x8000, 1); // 2k bank 1 at $0800 write_prg_byte(0x8001, i + 2); for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 134: banks = int_pow(2, chrsize) * 2; write_prg_byte(0x6000, 0x00); // set MMC3 banking mode for (size_t i = 0; i < banks; i += 2) { write_prg_byte(0x6001, (i & 0x180) >> 3); // select outer bank write_prg_byte(0x8000, 0); // 2k bank 0 at $0000 write_prg_byte(0x8001, i); write_prg_byte(0x8000, 1); // 2k bank 1 at $0800 write_prg_byte(0x8001, i + 2); for (size_t address = 0x0; address < 0x1000; address += 512) { dumpCHR(address); } } break; case 140: // 32K/128K banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { // 8K Banks write_prg_byte(0x6000, i); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 174: // 64k for (size_t i = 0; i < 8; i++) { write_prg_byte(0xFF00 + (i << 1), 0); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 176: banks = int_pow(2, chrsize) * 4; write_prg_byte(0x5FF3, 0); // extended MMC3 mode: disabled write_prg_byte(0x5FF0, 1); // 256K outer bank mode for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0x5FF2, (i & 0x700) >> 3); // outer 256k bank write_prg_byte(0x8000, 0); write_prg_byte(0x8001, i); write_prg_byte(0x8000, 0x0A); write_prg_byte(0x8001, i + 1); write_prg_byte(0x8000, 1); write_prg_byte(0x8001, i + 2); write_prg_byte(0x8000, 0x0B); write_prg_byte(0x8001, i + 3); write_prg_byte(0x8000, 2); write_prg_byte(0x8001, i + 4); write_prg_byte(0x8000, 3); write_prg_byte(0x8001, i + 5); write_prg_byte(0x8000, 4); write_prg_byte(0x8001, i + 6); write_prg_byte(0x8000, 5); write_prg_byte(0x8001, i + 7); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 184: // 16K/32K banks = int_pow(2, chrsize); for (size_t i = 0; i < banks; i++) { // 4K Banks write_prg_byte(0x6000, i); // CHR LOW (Bits 0-2) ($0000-$0FFF) for (size_t address = 0x0; address < 0x1000; address += 512) { // 4K Banks ($0000-$0FFF) dumpCHR(address); } } break; case 185: // 8K [READ 32K TO OVERRIDE LOCKOUT] for (size_t i = 0; i < 4; i++) { // Read 32K to locate valid 8K write_prg_byte(0x8000, i); uint8_t chrcheck = read_chr_byte(0); for (size_t address = 0x0; address < 0x2000; address += 512) { for (size_t x = 0; x < 512; x++) { sdBuffer[x] = read_chr_byte(address + x); } if (chrcheck != 0xFF) myFile.write(sdBuffer, 512); } } break; case 200: case 212: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i & 0x07), 0); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 201: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (i & 0xFF), 0); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 202: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 | (i << 1), 0); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 203: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000, (i & 0x03)); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 210: // 128K/256K banks = int_pow(2, chrsize) * 4; write_prg_byte(0xE800, 0xC0); // CHR RAM DISABLE (Bit 6 and 7) [WRITE NO RAM] for (size_t i = 0; i < banks; i += 8) { write_prg_byte(0x8000, i); // CHR Bank 0 write_prg_byte(0x8800, i + 1); // CHR Bank 1 write_prg_byte(0x9000, i + 2); // CHR Bank 2 write_prg_byte(0x9800, i + 3); // CHR Bank 3 write_prg_byte(0xA000, i + 4); // CHR Bank 4 write_prg_byte(0xA800, i + 5); // CHR Bank 5 write_prg_byte(0xB000, i + 6); // CHR Bank 6 write_prg_byte(0xB800, i + 7); // CHR Bank 7 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 214: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 | (i << 2), 0); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 225: case 255: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + (((i & 0x40) << 8) | (i & 0x3F)), 0); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 228: banks = int_pow(2, chrsize) / 2; write_prg_byte(0x8000, 0); for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 + ((i & 0x3C) >> 2), i & 0x03); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 229: for (size_t i = 0; i < 32; i++) { write_prg_byte(0x8000 + i, i); for (size_t address = 0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 236: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x8000 | (i & 0x0F), 0); // A16-A13 for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 240: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i++) { write_prg_byte(0x5FFF, (i & 0xF)); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; case 246: banks = int_pow(2, chrsize) / 2; for (size_t i = 0; i < banks; i += 4) { write_prg_byte(0x6004, (i | 0)); write_prg_byte(0x6005, (i | 1)); write_prg_byte(0x6006, (i | 2)); write_prg_byte(0x6007, (i | 3)); for (size_t address = 0x0; address < 0x2000; address += 512) { dumpCHR(address); } } break; } if (!readrom) { myFile.flush(); myFile.close(); println_Msg(F("CHR FILE DUMPED!")); println_Msg(FS(FSTRING_EMPTY)); display_Update(); } } } set_address(0); PHI2_HI; ROMSEL_HI; LED_GREEN_OFF; } /****************************************** RAM Functions *****************************************/ void readRAM() { display_Clear(); display_Update(); LED_BLUE_ON; LED_GREEN_ON; set_address(0); _delay_us(1); if (ramsize == 0) { println_Msg(F("RAM SIZE 0K")); display_Update(); } else { CreateRAMFileInSD(); word base = 0x6000; if (myFile) { switch (mapper) { case 0: // 2K/4K for (size_t address = 0x0; address < (0x800 * ramsize); address += 512) { // 2K/4K dumpPRG(base, address); // SWITCH MUST BE IN OFF POSITION } break; case 1: case 155: // 8K/16K/32K banks = int_pow(2, ramsize) / 2; // banks = 1,2,4 for (size_t i = 0; i < banks; i++) { // 8K Banks ($6000-$7FFF) write_prg_byte(0x8000, 0x80); // Clear Register write_mmc1_byte(0x8000, 1 << 3); write_mmc1_byte(0xE000, 0); if (banks == 4) // 32K write_mmc1_byte(0xA000, i << 2); else write_mmc1_byte(0xA000, i << 3); for (size_t address = 0x0; address < 0x2000; address += 512) { // 8K dumpPRG(base, address); } } break; case 4: // 1K/8K (MMC6/MMC3) if (mmc6) { // MMC6 1K write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE write_prg_byte(0xA001, 0x20); // PRG RAM PROTECT - Enable reading RAM at $7000-$71FF for (size_t address = 0x1000; address < 0x1200; address += 512) { // 512B dumpMMC5RAM(base, address); } write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE write_prg_byte(0xA001, 0x80); // PRG RAM PROTECT - Enable reading RAM at $7200-$73FF for (size_t address = 0x1200; address < 0x1400; address += 512) { // 512B dumpMMC5RAM(base, address); } write_prg_byte(0x8000, 6); // PRG RAM DISABLE } else { // MMC3 8K write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect for (size_t address = 0; address < 0x2000; address += 512) { // 8K dumpPRG(base, address); } } break; case 5: // 8K/16K/32K write_prg_byte(0x5100, 3); // 8K PRG Banks banks = int_pow(2, ramsize) / 2; // banks = 1,2,4 if (banks == 2) { // 16K - Split SRAM Chips 8K/8K for (size_t i = 0; i < (banks / 2); i++) { // Chip 1 write_prg_byte(0x5113, i); for (size_t address = 0; address < 0x2000; address += 512) { // 8K dumpMMC5RAM(base, address); } } for (size_t j = 4; j < (banks / 2) + 4; j++) { // Chip 2 write_prg_byte(0x5113, j); for (size_t address = 0; address < 0x2000; address += 512) { // 8K dumpMMC5RAM(base, address); } } } else { // 8K/32K Single SRAM Chip for (size_t i = 0; i < banks; i++) { // banks = 1 or 4 write_prg_byte(0x5113, i); for (size_t address = 0; address < 0x2000; address += 512) { // 8K dumpMMC5RAM(base, address); } } } break; case 16: // 256-byte EEPROM 24C02 case 159: // 128-byte EEPROM 24C01 [Little Endian] if (mapper == 159) eepsize = 128; else eepsize = 256; for (size_t address = 0; address < eepsize; address++) { EepromREAD(address); } myFile.write(sdBuffer, eepsize); // display_Clear(); // TEST PURPOSES - DISPLAY EEPROM DATA break; case 19: if (ramsize == 2) { // PRG RAM 128B for (size_t x = 0; x < 128; x++) { write_ram_byte(0xF800, x); // PRG RAM ENABLE sdBuffer[x] = read_prg_byte(0x4800); // DATA PORT } myFile.write(sdBuffer, 128); } else { // SRAM 8K for (size_t i = 0; i < 64; i++) { // Init Register write_ram_byte(0xE000, 0); } for (size_t address = 0; address < 0x2000; address += 512) { // 8K dumpPRG(base, address); } } break; case 80: // 1K write_prg_byte(0x7EF8, 0xA3); // PRG RAM ENABLE 0 write_prg_byte(0x7EF9, 0xA3); // PRG RAM ENABLE 1 for (size_t x = 0; x < 128; x++) { // PRG RAM 1K ($7F00-$7FFF) MIRRORED ONCE sdBuffer[x] = read_prg_byte(0x7F00 + x); } myFile.write(sdBuffer, 128); write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 0 write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 1 break; case 82: // 5K write_prg_byte(0x7EF7, 0xCA); // PRG RAM ENABLE 0 ($6000-$67FF) write_prg_byte(0x7EF8, 0x69); // PRG RAM ENABLE 1 ($6800-$6FFF) write_prg_byte(0x7EF9, 0x84); // PRG RAM ENABLE 2 ($7000-$73FF) for (size_t address = 0x0; address < 0x1400; address += 512) { // PRG RAM 5K ($6000-$73FF) dumpMMC5RAM(base, address); } write_prg_byte(0x7EF7, 0xFF); // PRG RAM DISABLE 0 ($6000-$67FF) write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 1 ($6800-$6FFF) write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 2 ($7000-$73FF) break; default: if (mapper == 118) // 8K write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect else if (mapper == 19) { for (size_t i = 0; i < 64; i++) { // Init Register write_ram_byte(0xE000, 0); } } else if ((mapper == 21) || (mapper == 25)) // 8K write_prg_byte(0x8000, 0); else if (mapper == 26) // 8K write_prg_byte(0xB003, 0x80); // PRG RAM ENABLE else if (mapper == 68) // 8K write_reg_byte(0xF000, 0x10); // PRG RAM ENABLE [WRITE RAM SAFE] else if (mapper == 69) { // 8K write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0 write_prg_byte(0xA000, 0xC0); // Parameter Register - PRG RAM Enabled, PRG RAM, Bank 0 to $6000-$7FFF } else if (mapper == 85) // 8K write_ram_byte(0xE000, 0x80); // PRG RAM ENABLE else if (mapper == 153) // 8K write_prg_byte(0x800D, 0x20); // PRG RAM Chip Enable for (size_t address = 0; address < 0x2000; address += 512) { // 8K dumpPRG(base, address); } if (mapper == 85) // 8K write_reg_byte(0xE000, 0); // PRG RAM DISABLE [WRITE RAM SAFE] break; } myFile.flush(); myFile.close(); println_Msg(F("RAM FILE DUMPED!")); println_Msg(FS(FSTRING_EMPTY)); display_Update(); if ((mapper == 16) || (mapper == 159)) printCRC(fileName, NULL, 0); else printCRC(fileName, NULL, 0); } } set_address(0); PHI2_HI; ROMSEL_HI; LED_BLUE_OFF; LED_GREEN_OFF; } void writeRAM() { display_Clear(); if (ramsize == 0) { print_Error(F("RAM SIZE 0K")); } else { fileBrowser(F("Select RAM File")); word base = 0x6000; sd.chdir(); sprintf(filePath, "%s/%s", filePath, fileName); display_Clear(); println_Msg(F("Writing File: ")); println_Msg(filePath); println_Msg(fileName); display_Update(); //open file on sd card if (myFile.open(filePath, O_READ)) { switch (mapper) { case 0: // 2K/4K for (size_t address = 0x0; address < (0x800 * ramsize); address += 512) { // 2K/4K myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { write_prg_byte(base + address + x, sdBuffer[x]); // SWITCH MUST BE IN OFF POSITION } } break; case 1: case 155: banks = int_pow(2, ramsize) / 2; // banks = 1,2,4 for (size_t i = 0; i < banks; i++) { // 8K Banks ($6000-$7FFF) write_prg_byte(0x8000, 0x80); // Clear Register write_mmc1_byte(0x8000, 1 << 3); // PRG ROM MODE 32K write_mmc1_byte(0xE000, 0); // PRG RAM ENABLED if (banks == 4) // 32K write_mmc1_byte(0xA000, i << 2); else write_mmc1_byte(0xA000, i << 3); for (size_t address = 0x0; address < 0x2000; address += 512) { // 8K myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { write_prg_byte(base + address + x, sdBuffer[x]); } } } break; case 4: // 1K/8K (MMC6/MMC3) if (mmc6) { // MMC6 1K write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE write_prg_byte(0xA001, 0x30); // PRG RAM PROTECT - Enable reading/writing to RAM at $7000-$71FF for (size_t address = 0x1000; address < 0x1200; address += 512) { // 512B myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { write_wram_byte(base + address + x, sdBuffer[x]); } } write_prg_byte(0x8000, 0x20); // PRG RAM ENABLE write_prg_byte(0xA001, 0xC0); // PRG RAM PROTECT - Enable reading/writing to RAM at $7200-$73FF for (size_t address = 0x1200; address < 0x1400; address += 512) { // 512B myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { write_wram_byte(base + address + x, sdBuffer[x]); } } write_prg_byte(0x8000, 0x6); // PRG RAM DISABLE } else { // MMC3 8K write_prg_byte(0xA001, 0x80); // PRG RAM CHIP ENABLE - Chip Enable, Allow Writes for (size_t address = 0; address < 0x2000; address += 512) { // 8K myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { write_prg_byte(base + address + x, sdBuffer[x]); } } write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect } break; case 5: // 8K/16K/32K write_prg_byte(0x5100, 3); // 8K PRG Banks banks = int_pow(2, ramsize) / 2; // banks = 1,2,4 if (banks == 2) { // 16K - Split SRAM Chips 8K/8K [ETROM = 16K (ONLY 1ST 8K BATTERY BACKED)] for (size_t i = 0; i < (banks / 2); i++) { // Chip 1 write_prg_byte(0x5113, i); for (size_t address = 0; address < 0x2000; address += 512) { // 8K writeMMC5RAM(base, address); } } for (size_t j = 4; j < (banks / 2) + 4; j++) { // Chip 2 write_prg_byte(0x5113, j); for (size_t address = 0; address < 0x2000; address += 512) { // 8K writeMMC5RAM(base, address); } } } else { // 8K/32K Single SRAM Chip [EKROM = 8K BATTERY BACKED, EWROM = 32K BATTERY BACKED] for (size_t i = 0; i < banks; i++) { // banks = 1 or 4 write_prg_byte(0x5113, i); for (size_t address = 0; address < 0x2000; address += 512) { // 8K writeMMC5RAM(base, address); } } } break; case 16: // 256-byte EEPROM 24C02 case 159: // 128-byte EEPROM 24C01 [Little Endian] if (mapper == 159) eepsize = 128; else eepsize = 256; myFile.read(sdBuffer, eepsize); for (size_t address = 0; address < eepsize; address++) { EepromWRITE(address); if ((address % 128) == 0) display_Clear(); print_Msg(F(".")); display_Update(); } break; case 19: if (ramsize == 2) { // PRG RAM 128B myFile.read(sdBuffer, 128); for (size_t x = 0; x < 128; x++) { write_ram_byte(0xF800, x); // PRG RAM ENABLE write_prg_byte(0x4800, sdBuffer[x]); // DATA PORT } } else { // SRAM 8K for (size_t i = 0; i < 64; i++) { // Init Register write_ram_byte(0xF800, 0x40); // PRG RAM WRITE ENABLE } write_ram_byte(0xF800, 0x40); // PRG RAM WRITE ENABLE for (size_t address = 0; address < 0x2000; address += 512) { // 8K myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { write_prg_byte(base + address + x, sdBuffer[x]); } } write_ram_byte(0xF800, 0x0F); // PRG RAM WRITE PROTECT } break; case 80: // 1K write_prg_byte(0x7EF8, 0xA3); // PRG RAM ENABLE 0 write_prg_byte(0x7EF9, 0xA3); // PRG RAM ENABLE 1 for (size_t address = 0x1F00; address < 0x2000; address += 512) { // PRG RAM 1K ($7F00-$7FFF) myFile.read(sdBuffer, 128); for (size_t x = 0; x < 128; x++) { write_prg_byte(base + address + x, sdBuffer[x]); } } write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 0 write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 1 break; case 82: // 5K write_prg_byte(0x7EF7, 0xCA); // PRG RAM ENABLE 0 ($6000-$67FF) write_prg_byte(0x7EF8, 0x69); // PRG RAM ENABLE 1 ($6800-$6FFF) write_prg_byte(0x7EF9, 0x84); // PRG RAM ENABLE 2 ($7000-$73FF) for (size_t address = 0x0; address < 0x1400; address += 1024) { // PRG RAM 5K ($6000-$73FF) myFile.read(sdBuffer, 512); firstbyte = sdBuffer[0]; for (size_t x = 0; x < 512; x++) write_prg_byte(base + address + x, sdBuffer[x]); myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) write_prg_byte(base + address + x + 512, sdBuffer[x]); write_prg_byte(base + address, firstbyte); // REWRITE 1ST BYTE } write_prg_byte(0x7EF7, 0xFF); // PRG RAM DISABLE 0 ($6000-$67FF) write_prg_byte(0x7EF8, 0xFF); // PRG RAM DISABLE 1 ($6800-$6FFF) write_prg_byte(0x7EF9, 0xFF); // PRG RAM DISABLE 2 ($7000-$73FF) break; default: if (mapper == 118) // 8K write_prg_byte(0xA001, 0x80); // PRG RAM CHIP ENABLE - Chip Enable, Allow Writes else if ((mapper == 21) || (mapper == 25)) // 8K write_prg_byte(0x8000, 0); else if (mapper == 26) // 8K write_prg_byte(0xB003, 0x80); // PRG RAM ENABLE // else if (mapper == 68) // 8K // write_reg_byte(0xF000, 0x10); // PRG RAM ENABLE [WRITE RAM SAFE] else if (mapper == 69) { // 8K write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0 write_prg_byte(0xA000, 0xC0); // Parameter Register - PRG RAM Enabled, PRG RAM, Bank 0 to $6000-$7FFF } else if (mapper == 85) // 8K write_ram_byte(0xE000, 0x80); // PRG RAM ENABLE else if (mapper == 153) // 8K write_prg_byte(0x800D, 0x20); // PRG RAM Chip Enable for (size_t address = 0; address < 0x2000; address += 512) { // 8K myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { write_prg_byte(base + address + x, sdBuffer[x]); } } if (mapper == 118) // 8K write_prg_byte(0xA001, 0xC0); // PRG RAM CHIP ENABLE - Chip Enable, Write Protect else if (mapper == 26) // 8K write_prg_byte(0xB003, 0); // PRG RAM DISABLE // else if (mapper == 68) // 8K // write_reg_byte(0xF000, 0x00); // PRG RAM DISABLE [WRITE RAM SAFE] else if (mapper == 69) { // 8K write_prg_byte(0x8000, 8); // Command Register - PRG Bank 0 write_prg_byte(0xA000, 0); // Parameter Register - PRG RAM Disabled, PRG ROM, Bank 0 to $6000-$7FFF } else if (mapper == 85) // 8K write_reg_byte(0xE000, 0); // PRG RAM DISABLE [WRITE RAM SAFE] break; } myFile.close(); LED_GREEN_ON; println_Msg(FS(FSTRING_EMPTY)); println_Msg(F("RAM FILE WRITTEN!")); display_Update(); } else { print_FatalError(sd_error_STR); } } LED_RED_OFF; LED_GREEN_OFF; sd.chdir(); // root filePath[0] = '\0'; // Reset filePath } /****************************************** Eeprom Functions *****************************************/ // EEPROM MAPPING // 00-01 FOLDER # // 02-05 SNES/GB READER SETTINGS // 06 LED - ON/OFF [SNES/GB] // 07 MAPPER // 08 PRG SIZE // 09 CHR SIZE // 10 RAM SIZE void resetEEPROM() { EEPROM_writeAnything(0, 0); // FOLDER # EEPROM_writeAnything(2, 0); // CARTMODE EEPROM_writeAnything(3, 0); // RETRY EEPROM_writeAnything(4, 0); // STATUS EEPROM_writeAnything(5, 0); // UNKNOWNCRC EEPROM_writeAnything(6, 1); // LED (RESET TO ON) EEPROM_writeAnything(7, 0); // MAPPER EEPROM_writeAnything(8, 0); // PRG SIZE EEPROM_writeAnything(9, 0); // CHR SIZE EEPROM_writeAnything(10, 0); // RAM SIZE } void EepromStart_NES() { write_prg_byte(0x800D, 0x00); // sda low, scl low write_prg_byte(0x800D, 0x60); // sda, scl high write_prg_byte(0x800D, 0x20); // sda low, scl high write_prg_byte(0x800D, 0x00); // START } void EepromStop_NES() { write_prg_byte(0x800D, 0x00); // sda, scl low write_prg_byte(0x800D, 0x20); // sda low, scl high write_prg_byte(0x800D, 0x60); // sda, scl high write_prg_byte(0x800D, 0x40); // sda high, scl low write_prg_byte(0x800D, 0x00); // STOP } void EepromSet0_NES() { write_prg_byte(0x800D, 0x00); // sda low, scl low write_prg_byte(0x800D, 0x20); // sda low, scl high // 0 write_prg_byte(0x800D, 0x00); // sda low, scl low } void EepromSet1_NES() { write_prg_byte(0x800D, 0x40); // sda high, scl low write_prg_byte(0x800D, 0x60); // sda high, scl high // 1 write_prg_byte(0x800D, 0x40); // sda high, scl low write_prg_byte(0x800D, 0x00); // sda low, scl low } void EepromStatus_NES() { // ACK write_prg_byte(0x800D, 0x40); // sda high, scl low write_prg_byte(0x800D, 0x60); // sda high, scl high write_prg_byte(0x800D, 0xE0); // sda high, scl high, read high uint8_t eepStatus = 1; do { eepStatus = (read_prg_byte(0x6000) & 0x10) >> 4; delayMicroseconds(4); } while (eepStatus == 1); write_prg_byte(0x800D, 0x40); // sda high, scl low } void EepromReadData_NES() { // read serial data into buffer for (uint8_t i = 0; i < 8; i++) { write_prg_byte(0x800D, 0x60); // sda high, scl high, read low write_prg_byte(0x800D, 0xE0); // sda high, scl high, read high eepbit[i] = (read_prg_byte(0x6000) & 0x10) >> 4; // Read 0x6000 with Mask 0x10 (bit 4) write_prg_byte(0x800D, 0x40); // sda high, scl low } } void EepromDevice_NES() { // 24C02 ONLY EepromSet1_NES(); EepromSet0_NES(); EepromSet1_NES(); EepromSet0_NES(); EepromSet0_NES(); // A2 EepromSet0_NES(); // A1 EepromSet0_NES(); // A0 } void EepromReadMode_NES() { EepromSet1_NES(); // READ EepromStatus_NES(); // ACK } void EepromWriteMode_NES() { EepromSet0_NES(); // WRITE EepromStatus_NES(); // ACK } void EepromFinish_NES() { write_prg_byte(0x800D, 0x00); // sda low, scl low write_prg_byte(0x800D, 0x40); // sda high, scl low write_prg_byte(0x800D, 0x60); // sda high, scl high write_prg_byte(0x800D, 0x40); // sda high, scl low write_prg_byte(0x800D, 0x00); // sda low, scl low } void EepromSetAddress01(uint8_t address) { // 24C01 [Little Endian] for (uint8_t i = 0; i < 7; i++) { if (address & 0x1) // Bit is HIGH EepromSet1_NES(); else // Bit is LOW EepromSet0_NES(); address >>= 1; // rotate to the next bit } } void EepromSetAddress02(uint8_t address) { // 24C02 for (uint8_t i = 0; i < 8; i++) { if ((address >> 7) & 0x1) // Bit is HIGH EepromSet1_NES(); else // Bit is LOW EepromSet0_NES(); address <<= 1; // rotate to the next bit } EepromStatus_NES(); // ACK } void EepromWriteData01() { // 24C01 [Little Endian] for (uint8_t i = 0; i < 8; i++) { if (eeptemp & 0x1) // Bit is HIGH EepromSet1_NES(); else // Bit is LOW EepromSet0_NES(); eeptemp >>= 1; // rotate to the next bit } EepromStatus_NES(); // ACK } void EepromWriteData02() { // 24C02 for (uint8_t i = 0; i < 8; i++) { if ((eeptemp >> 7) & 0x1) // Bit is HIGH EepromSet1_NES(); else // Bit is LOW EepromSet0_NES(); eeptemp <<= 1; // rotate to the next bit } EepromStatus_NES(); // ACK } void EepromREAD(uint8_t address) { EepromStart_NES(); // START if (mapper == 159) { // 24C01 EepromSetAddress01(address); // 24C01 [Little Endian] EepromReadMode_NES(); EepromReadData_NES(); EepromFinish_NES(); EepromStop_NES(); // STOP // OR 8 bits into byte eeptemp = eepbit[7] << 7 | eepbit[6] << 6 | eepbit[5] << 5 | eepbit[4] << 4 | eepbit[3] << 3 | eepbit[2] << 2 | eepbit[1] << 1 | eepbit[0]; } else { // 24C02 EepromDevice_NES(); // DEVICE [1010] + ADDR [A2-A0] EepromWriteMode_NES(); EepromSetAddress02(address); EepromStart_NES(); // START EepromDevice_NES(); // DEVICE [1010] + ADDR [A2-A0] EepromReadMode_NES(); EepromReadData_NES(); EepromFinish_NES(); EepromStop_NES(); // STOP // OR 8 bits into byte eeptemp = eepbit[0] << 7 | eepbit[1] << 6 | eepbit[2] << 5 | eepbit[3] << 4 | eepbit[4] << 3 | eepbit[5] << 2 | eepbit[6] << 1 | eepbit[7]; } sdBuffer[address] = eeptemp; } void EepromWRITE(uint8_t address) { eeptemp = sdBuffer[address]; EepromStart_NES(); // START if (mapper == 159) { // 24C01 EepromSetAddress01(address); // 24C01 [Little Endian] EepromWriteMode_NES(); EepromWriteData01(); // 24C01 [Little Endian] } else { // 24C02 EepromDevice_NES(); // DEVICE [1010] + ADDR [A2-A0] EepromWriteMode_NES(); EepromSetAddress02(address); EepromWriteData02(); } EepromStop_NES(); // STOP } /****************************************** NESmaker Flash Cart [SST 39SF40] *****************************************/ void NESmaker_ResetFlash() { // Reset Flash write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xFF); // Reset } // SST 39SF040 Software ID void NESmaker_ID() { // Read Flash ID NESmaker_ResetFlash(); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0x90); // Software ID Entry flashid = read_prg_byte(0x8000) << 8; flashid |= read_prg_byte(0x8001); sprintf(flashid_str, "%04X", flashid); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xF0); // Software ID Exit if (flashid == 0xBFB7) // SST 39SF040 flashfound = 1; } void NESmaker_SectorErase(uint8_t bank, word address) { write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0x80); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, bank); // $00-$1F write_prg_byte(address, 0x30); // Sector Erase ($8000/$9000/$A000/$B000) } void NESmaker_ByteProgram(uint8_t bank, word address, uint8_t data) { write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xA0); write_prg_byte(0xC000, bank); // $00-$1F write_prg_byte(address, data); // $8000-$BFFF } // SST 39SF040 Chip Erase [NOT IMPLEMENTED] void NESmaker_ChipErase() { // Typical 70ms write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0x80); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0xAA); write_prg_byte(0xC000, 0x00); write_prg_byte(0xAAAA, 0x55); write_prg_byte(0xC000, 0x01); write_prg_byte(0x9555, 0x10); // Chip Erase } void writeFLASH() { display_Clear(); if (!flashfound) { LED_RED_ON; println_Msg(F("FLASH NOT DETECTED")); display_Update(); } else { print_Msg(F("Flash ID: ")); println_Msg(flashid_str); println_Msg(FS(FSTRING_EMPTY)); println_Msg(F("NESmaker Flash Found")); println_Msg(FS(FSTRING_EMPTY)); display_Update(); delay(100); fileBrowser(F("Select FLASH File")); word base = 0x8000; sd.chdir(); sprintf(filePath, "%s/%s", filePath, fileName); LED_RED_ON; display_Clear(); println_Msg(F("Writing File: ")); println_Msg(filePath); println_Msg(fileName); display_Update(); //open file on sd card if (myFile.open(filePath, O_READ)) { banks = int_pow(2, prgsize); // 256K/512K for (size_t i = 0; i < banks; i++) { // 16K Banks for (size_t sector = 0; sector < 0x4000; sector += 0x1000) { // 4K Sectors ($8000/$9000/$A000/$B000) // Sector Erase NESmaker_SectorErase(i, base + sector); delay(18); // Typical 18ms for (uint8_t j = 0; j < 2; j++) { // Confirm erase twice do { bytecheck = read_prg_byte(base + sector); delay(18); } while (bytecheck != 0xFF); } // Program Byte for (size_t addr = 0x0; addr < 0x1000; addr += 512) { myFile.read(sdBuffer, 512); for (size_t x = 0; x < 512; x++) { word location = base + sector + addr + x; NESmaker_ByteProgram(i, location, sdBuffer[x]); delayMicroseconds(14); // Typical 14us for (uint8_t k = 0; k < 2; k++) { // Confirm write twice do { bytecheck = read_prg_byte(location); delayMicroseconds(14); } while (bytecheck != sdBuffer[x]); } } } } #if (defined(ENABLE_LCD) || defined(ENABLE_OLED)) display.print(F("*")); display.updateDisplay(); #else Serial.print(F("*")); if ((i != 0) && ((i + 1) % 16 == 0)) Serial.println(FSTRING_EMPTY); #endif } myFile.close(); LED_GREEN_ON; println_Msg(FS(FSTRING_EMPTY)); println_Msg(F("FLASH FILE WRITTEN!")); display_Update(); } else { LED_RED_ON; println_Msg(F("SD ERROR")); display_Update(); } } display_Clear(); LED_RED_OFF; LED_GREEN_OFF; sd.chdir(); // root filePath[0] = '\0'; // Reset filePath } // avoid warnings #undef MODE_READ #undef MODE_WRITE #endif //****************************************** // End of File //******************************************