mirror of https://github.com/sanni/cartreader.git synced 2024-11-11 15:35:06 +01:00

History

sanni 0694d103d4 Update README.md		2019-08-05 16:52:02 +02:00
..
backplate_battery.stl	Add files via upload	2018-08-16 18:21:04 +02:00
backplate_tabs.stl	Add files via upload	2018-04-13 16:54:42 +02:00
case_bottom.stl	Add case	2019-08-05 16:42:24 +02:00
case_button.stl	Add case	2019-08-05 16:42:24 +02:00
case_top.stl	Add case	2019-08-05 16:42:24 +02:00
combined_no_tabs.stl	Add files via upload	2018-05-05 20:19:32 +02:00
microsd_spacer.stl	Add case	2019-08-05 16:42:24 +02:00
n64sleeve.stl	Add case	2019-08-05 16:42:24 +02:00
README.md	Update README.md	2019-08-05 16:52:02 +02:00
sd_spacer.stl	Add files via upload	2018-09-28 09:40:08 +02:00
sidewall_battery.stl	Add files via upload	2018-08-16 18:21:04 +02:00
sidewall_tabs.stl	Add files via upload	2018-04-13 16:54:42 +02:00
snes_spacer.stl	Add files via upload	2018-04-13 16:54:42 +02:00

README.md

Combined STL file with all parts

Separate STL files for each part

snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot

n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough

backplate_tabs.stl is the backplate that holds the Arduino

sd_spacer.stl or microsd_spacer hold the RGB led and fit between the SD card and the Cart Reader pcb (print with clear PLA/ABS)

sidewall_tabs.stl secures the Arduino Mega to the backplate with five M2x8 screws

case_xxx.stl are a replacement for the more simple backplate in case you prefer a full enclosure

The rest of the STL files are alternative designs in case you use the battery add-on.

Print settings for Slic3r Prusa Edition

Select the "0.20mm NORMAL" setting that comes with Slic3r and change the following parameters:
ensure_vertical_shell_thickness = 0
fill_density = 5%
first_layer_height = 0.3
perimeters = 1
thin_walls = 1