mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-15 01:15:06 +01:00
724 lines
19 KiB
C++
724 lines
19 KiB
C++
//******************************************
|
|
// INTELLIVISION MODULE
|
|
//******************************************
|
|
#ifdef ENABLE_INTV
|
|
|
|
// Mattel Intellivision
|
|
// Cartridge Pinout
|
|
// 44P 2.54mm pitch connector
|
|
//
|
|
// TOP SIDE BOTTOM SIDE
|
|
// (EVEN) (ODD)
|
|
// +-------+
|
|
// GND -| 2 1 |- GND
|
|
// CBLNK -| 4 3 |- /MSYNC
|
|
// EXT AUD -| 6 5 |- DB7
|
|
// EXT VID -| 8 7 |- DB8
|
|
// MCLK -| 10 9 |- DB6
|
|
// RESET -| 12 11 |- DB9
|
|
// SR1 -| 14 13 |- DB5
|
|
// VOICE -| 16 15 |- DB10
|
|
// VOICE -| 18 17 |- DB4
|
|
// GND -| 20 19 |- DB11
|
|
// GND -| 22 21 |- DB3
|
|
// GND -| 24 23 |- DB12
|
|
// GND -| 26 25 |- DB13
|
|
// GND -| 28 27 |- DB2
|
|
// /BUSAK -| 30 29 |- DB14
|
|
// BC1 -| 32 31 |- DB1
|
|
// BC2 -| 34 33 |- DB0
|
|
// BDIR -| 36 35 |- DB15
|
|
// BDIR -| 38 37 |- BDIR
|
|
// BC2 -| 40 39 |- BC2
|
|
// BC1 -| 42 41 |- BC1
|
|
// GND -| 44 43 |- VCC(+5V)
|
|
// +-------+
|
|
|
|
// CONTROL PINS:
|
|
// /MSYNC(PH3)- PIN 3 [ROM PIN 14]
|
|
// BC1(PH4) - PIN 41 [ROM PIN 28]
|
|
// BC2(PH5) - PIN 39 [ROM PIN 27]
|
|
// BDIR(PH6) - PIN 37 [ROM PIN 26]
|
|
// NOTE: BDIR/BC1/BC2 ONLY CONNECTED TO BOTTOM (ODD) PINS
|
|
|
|
// NOT CONNECTED:
|
|
// RESET(PH0) - N/C - GND IN CART
|
|
// MCLK(PH1) - N/C - GND IN CART
|
|
|
|
// BUS PROTOCOL COMMANDS - BDIR/BC1/BC2
|
|
// NO ACTION (NACT): 0/0/0
|
|
// ADDR TO REG (ADAR): 0/1/0
|
|
// INT ADDR TO BUS (IAB): 0/0/1
|
|
// DATA TO BUS (DTB): 0/1/1
|
|
// BUS TO ADDR (BAR): 1/0/0
|
|
// DATA WRITE (DW): 1/1/0
|
|
// DATA WRITE STROBE (DWS): 1/0/1
|
|
// INTERRUPT ACK (INTAK): 1/1/1
|
|
|
|
// Cart Configurations
|
|
// Format = {mapper,romlo,romhi,ramsize}
|
|
static const byte PROGMEM intvmapsize[] = {
|
|
0, 0, 3, 0, // default mattel up to 32K (8K/12K/16K/24K/32K)
|
|
1, 2, 4, 0, // demo cart 16K, championship tennis 32K, wsml baseball 48K
|
|
2, 2, 4, 0, // up to 48K (16K/32K/48K)
|
|
3, 5, 5, 0, // tower of doom 48K
|
|
4, 2, 2, 1, // uscf chess 16K + RAM 1K
|
|
5, 3, 4, 0, // congo bongo/defender/pac-man 24K, dig dug 32K
|
|
6, 2, 2, 0, // centipede 16K
|
|
7, 2, 2, 0, // imagic carts 16K
|
|
8, 2, 2, 0, // mte-201 test cart 16K
|
|
9, 4, 4, 2, // triple challenge 32K + RAM 2K
|
|
};
|
|
|
|
byte intvmapcount = 10; // (sizeof(mapsize)/sizeof(mapsize[0])) / 4;
|
|
boolean intvmapfound = false;
|
|
byte intvmapselect;
|
|
int intvindex;
|
|
|
|
const byte INTV[] PROGMEM = { 8, 12, 16, 24, 32, 48 };
|
|
byte intvlo = 0; // Lowest Entry
|
|
byte intvhi = 5; // Highest Entry
|
|
|
|
byte intvmapper;
|
|
byte intvsize;
|
|
|
|
// EEPROM MAPPING
|
|
// 07 MAPPER
|
|
// 08 ROM SIZE
|
|
|
|
//******************************************
|
|
// Menu
|
|
//******************************************
|
|
// Base Menu
|
|
static const char* const menuOptionsINTV[] PROGMEM = { FSTRING_SELECT_CART, FSTRING_READ_ROM, FSTRING_SET_SIZE, FSTRING_RESET };
|
|
|
|
void setup_INTV() {
|
|
// Request 5V
|
|
setVoltage(VOLTS_SET_5V);
|
|
|
|
// Set Address Pins to Output (UNUSED)
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// ---(PH0) ---(PH1) /MSYNC(PH3) BC1(PH4) BC2(PH5) BDIR(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (DB0-DB15) to Input
|
|
DDRC = 0x00;
|
|
DDRA = 0x00;
|
|
|
|
// Setting Control Pins to HIGH
|
|
// ---(PH0) ---(PH1) /MSYNC(PH3) BC1(PH4) BC2(PH5) BDIR(PH6)
|
|
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTF = 0xFF; // A0-A7
|
|
PORTK = 0xFF; // A8-A15
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
checkStatus_INTV();
|
|
strcpy(romName, "INTV");
|
|
|
|
mode = CORE_INTV;
|
|
}
|
|
|
|
void intvMenu() {
|
|
convertPgm(menuOptionsINTV, 4);
|
|
uint8_t mainMenu = question_box(F("INTELLIVISION MENU"), menuOptions, 4, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Select Cart
|
|
setCart_INTV();
|
|
setup_INTV();
|
|
break;
|
|
|
|
case 1:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_INTV();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 2:
|
|
// Set Mapper
|
|
setMapper_INTV();
|
|
checkMapperSize_INTV();
|
|
setROMSize_INTV();
|
|
break;
|
|
|
|
case 3:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// INTELLIVISION BUS PROTOCOL COMMANDS
|
|
//******************************************
|
|
// CONTROL PINS - BDIR/BC1/BC2
|
|
// NO ACTION (NACT): 0/0/0
|
|
// ADDR TO REG (ADAR): 0/1/0 [NOTE: ORDER BDIR/BC1/BC2]
|
|
// DATA TO BUS (DTB): 0/1/1
|
|
// BUS TO ADDR (BAR): 1/0/0
|
|
// DATA WRITE (DW): 1/1/0 [NOTE: ORDER BDIR/BC1/BC2]
|
|
// DATA WRITE STROBE (DWS): 1/0/1 [NOTE: ORDER BDIR/BC1/BC2]
|
|
|
|
// IMMEDIATE MODE DATA READ SEQUENCE: BAR-NACT-DTB-NACT
|
|
// IMMEDIATE MODE DATA WRITE SEQUENCE: BAR-NACT-DW-DWS-NACT
|
|
// DIRECT ADDRESSING MODE READ SEQUENCE: BAR-NACT-ADAR-NACT-DTB-NACT
|
|
|
|
// NO ACTION (NACT) - 0/0/0
|
|
void NACT_INT() {
|
|
// Switch BC1(PH4) + BC2(PH5) + BDIR(PH6) to LOW
|
|
PORTH &= ~(1 << 4) & ~(1 << 5) & ~(1 << 6);
|
|
// DB0..DB15 INPUT
|
|
DDRC = 0x00;
|
|
DDRA = 0x00;
|
|
}
|
|
|
|
// SET ADDRESS - BUS TO ADDR (BAR) - 1/0/0
|
|
void BAR_INT() {
|
|
// Switch BDIR(PH6) to HIGH
|
|
PORTH |= (1 << 6);
|
|
// Switch BC1(PH4) + BC2(PH5) to LOW
|
|
PORTH &= ~(1 << 4) & ~(1 << 5);
|
|
// Address OUT
|
|
DDRC = 0xFF;
|
|
DDRA = 0xFF;
|
|
}
|
|
|
|
// READ DATA - DATA TO BUS (DTB) - 0/1/1
|
|
void DTB_INT() {
|
|
// Switch BDIR(PH6) to LOW
|
|
PORTH &= ~(1 << 6);
|
|
// Switch BC1(PH4) + BC2(PH5) to HIGH
|
|
PORTH |= (1 << 4) | (1 << 5);
|
|
// Data IN
|
|
DDRC = 0x00;
|
|
DDRA = 0x00;
|
|
}
|
|
|
|
// ADDRESS DATA TO ADDRESS REGISTER (ADAR) - 0/1/0
|
|
void ADAR_INT() {
|
|
// Switch BC2(PH5) + BDIR(PH6) to LOW
|
|
PORTH &= ~(1 << 5) & ~(1 << 6);
|
|
// Switch BC1(PH4) to HIGH
|
|
PORTH |= (1 << 4);
|
|
}
|
|
|
|
// DATA WRITE PAIRED COMMAND - DW + DWS
|
|
// DATA SHOULD BE STABLE ACROSS BOTH
|
|
|
|
// DATA WRITE (DW) - 1/1/0
|
|
void DW_INT() {
|
|
// Switch BC1(PH4) + BDIR(PH6) to HIGH
|
|
PORTH |= (1 << 4) | (1 << 6);
|
|
// Switch BC2(PH5) to LOW
|
|
PORTH &= ~(1 << 5);
|
|
}
|
|
|
|
// DATA WRITE STROBE (DWS) - 1/0/1
|
|
void DWS_INT() {
|
|
// Switch BC2(PH5) + BDIR(PH6) to HIGH
|
|
PORTH |= (1 << 5) | (1 << 6);
|
|
// Switch BC1(PH4) to LOW
|
|
PORTH &= ~(1 << 4);
|
|
}
|
|
|
|
//******************************************
|
|
// READ CODE
|
|
//******************************************
|
|
|
|
uint16_t readData_INTV(uint32_t addr) {
|
|
PORTC = addr & 0xFF;
|
|
PORTA = (addr >> 8) & 0xFF;
|
|
|
|
BAR_INT();
|
|
// Wait for bus
|
|
// 5 x 62.5ns = 312.5ns
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
NACT_INT();
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
DTB_INT();
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
uint16_t ret = (((PINA & 0xFF) << 8) | (PINC & 0xFF));
|
|
|
|
NACT_INT();
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
return ret;
|
|
}
|
|
|
|
// MAPPER ROM ADDRESSES
|
|
// 0: 0x50-0x70,0xD0-0xE0,0xF0-0x100, // default mattel up to 32K (8K/16K/24K/32K)
|
|
// 1: 0x50-0x70,0xD0-0x100, // demo cart 16K, championship tennis 32K, wsml baseball 48K
|
|
// 2: 0x50-0x70,0x90-0xC0,0xD0-0xE0, // up to 48K (16K/32K/48K)
|
|
// 3: 0x50-0x70,0x90-0xB0,0xD0-0xE0,0xF0-0x100, // tower of doom 48K
|
|
// 4: 0x50-0x70, // uscf chess 16K + RAM 1K
|
|
// 5: 0x50-0x80,0x90-0xC0, // congo bongo/defender/pac-man 24K, dig dug 32K
|
|
// 6: 0x60-0x80, // centipede 16K
|
|
// 7: 0x48-0x68, // imagic carts 16K
|
|
// 8: 0x50-0x60,0x70-0x80, // mte-201 test cart 16K
|
|
// 9: 0x50-0x70,0x90-0xB0,[0xC0-0xC8,0xD0-0xD8] // triple challenge 32K + RAM 2K [0xC0 + 0xD0 segments are not needed]
|
|
|
|
void readSegment_INTV(uint32_t startaddr, uint32_t endaddr) {
|
|
for (uint32_t addr = startaddr; addr < endaddr; addr += 256) {
|
|
for (uint16_t w = 0; w < 256; w++) {
|
|
uint16_t temp = readData_INTV(addr + w);
|
|
sdBuffer[w * 2] = (temp >> 8) & 0xFF;
|
|
sdBuffer[(w * 2) + 1] = temp & 0xFF;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
|
|
// MODIFIED READ ROUTINE FOR ALL 10 MAPPERS
|
|
void readROM_INTV() {
|
|
createFolderAndOpenFile("INTV", "ROM", romName, "int");
|
|
|
|
switch (intvmapper) {
|
|
case 0: //default mattel up to 32K (8K/12K/16K/24K/32K)
|
|
readSegment_INTV(0x5000, 0x6000); // 8K
|
|
if (intvsize > 0) {
|
|
readSegment_INTV(0x6000, 0x6800); // +4K = 12K
|
|
if (intvsize > 1) {
|
|
readSegment_INTV(0x6800, 0x7000); // +4K = 16K
|
|
if (intvsize > 2) {
|
|
readSegment_INTV(0xD000, 0xE000); // +8K = 24K
|
|
if (intvsize > 3)
|
|
readSegment_INTV(0xF000, 0x10000); // +8K = 32K
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 1: // demo cart/championship tennis/wsml baseball
|
|
readSegment_INTV(0x5000, 0x7000); // 16K Demo Cart
|
|
if (intvsize > 2) {
|
|
readSegment_INTV(0xD000, 0xE000); // +8K = 24K [NONE]
|
|
if (intvsize > 3) {
|
|
readSegment_INTV(0xE000, 0xF000); // +8K = 32K Championship Tennis
|
|
if (intvsize > 4) {
|
|
readSegment_INTV(0xF000, 0x10000); // +8K = 40K WSML Baseball [MISSING 8K ECS BANK]
|
|
// ecs bank switch
|
|
ecsBank(0xFFFF, 0x1); // switch ecs page 1 to 0xF000
|
|
readSegment_INTV(0xF000, 0x10000); // + 8K = 48K WSML Baseball
|
|
ecsBank(0xFFFF, 0x0); // reset ecs page 0 to 0xF000
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 2: // up to 48K (16K/32K/48K)
|
|
readSegment_INTV(0x5000, 0x7000); // 16K
|
|
if (intvsize > 2) {
|
|
readSegment_INTV(0x9000, 0xA000); // +8K = 24K [NONE]
|
|
if (intvsize > 3) {
|
|
readSegment_INTV(0xA000, 0xB000); // +8K = 32K
|
|
if (intvsize > 4) {
|
|
readSegment_INTV(0xB000, 0xC000); // +8K = 40K
|
|
readSegment_INTV(0xD000, 0xE000); // +8K = 48K
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 3: // tower of doom 48K
|
|
readSegment_INTV(0x5000, 0x7000); // 16K
|
|
readSegment_INTV(0x9000, 0xB000); // +16K = 32K
|
|
readSegment_INTV(0xD000, 0xE000); // +8K = 40K
|
|
readSegment_INTV(0xF000, 0x10000); // +8K = 48K
|
|
break;
|
|
|
|
case 4: // chess 16K
|
|
PORTH &= ~(1 << 3); // /MSYNC to LOW
|
|
readSegment_INTV(0x5000, 0x6000); // 8K
|
|
PORTH |= (1 << 3); // /MSYNC to HIGH
|
|
readSegment_INTV(0x6000, 0x7000); // 8K
|
|
break;
|
|
|
|
case 5: // congo bongo/defender/pac-man/dig dug
|
|
readSegment_INTV(0x5000, 0x7000); // 16K
|
|
readSegment_INTV(0x7000, 0x8000); // +8K = 24K Congo Bongo/Defender/Pac-Man
|
|
if (intvsize > 3) {
|
|
readSegment_INTV(0x9000, 0xA000); // +8K = 32K Dig Dug
|
|
//readSegment_INTV(0xA000,0xC000); // +16K = 48K [UNUSED]
|
|
}
|
|
break;
|
|
|
|
case 6: // centipede 16K
|
|
readSegment_INTV(0x6000, 0x8000); // 16K
|
|
break;
|
|
|
|
case 7: // imagic carts 16K
|
|
readSegment_INTV(0x4800, 0x6800); // 16K
|
|
break;
|
|
|
|
case 8: //mte-201 test cart 16K
|
|
readSegment_INTV(0x5000, 0x6000); // 8K
|
|
readSegment_INTV(0x7000, 0x8000); // +8K = 16K
|
|
break;
|
|
|
|
case 9: // triple challenge 32K [KNOWN ROM 44K BAD!]
|
|
readSegment_INTV(0x5000, 0x7000); // 16K
|
|
readSegment_INTV(0x9000, 0xB000); // +16K = 32K
|
|
// 0xC000 + 0xD000 SEGMENTS ARE NOT NEEDED (PER INTVNUT POST)
|
|
// readSegment_INTV(0xC000,0xC800); // +4K = 36K
|
|
// readSegment_INTV(0xD000,0xE000); // +8K = 44K
|
|
break;
|
|
}
|
|
myFile.close();
|
|
|
|
// Compare CRC32 to database and rename ROM if found
|
|
compareCRC("intv.txt", 0, 1, 0);
|
|
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
// ECS BANKSWITCH FOR WSML BASEBALL
|
|
// write $xA5y to $xFFF
|
|
// x = rom location ($x000 - $xFFF)
|
|
// y = page (up to 16 - WSML Baseball only uses 0/1)
|
|
void ecsBank(uint32_t addr, uint8_t bank) {
|
|
uint16_t ecsdata = (addr & 0xF000) + 0x0A50 + bank; // $xA5y
|
|
|
|
// Data OUT
|
|
DDRA = 0xFF;
|
|
DDRC = 0xFF;
|
|
|
|
// Set Address
|
|
PORTA = (addr >> 8) & 0xFF;
|
|
PORTC = addr & 0xFF;
|
|
|
|
BAR_INT();
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NACT_INT();
|
|
NOP;
|
|
|
|
// Data OUT
|
|
DDRA = 0xFF;
|
|
DDRC = 0xFF;
|
|
PORTA = (ecsdata >> 8) & 0xFF; // $xA
|
|
PORTC = ecsdata & 0xFF; // $5y
|
|
|
|
DW_INT();
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
DWS_INT();
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NACT_INT();
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
}
|
|
|
|
//******************************************
|
|
// MAPPER CODE
|
|
//******************************************
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
void printMapperSelection_INTV(int index) {
|
|
display_Clear();
|
|
print_Msg(F("Mapper: "));
|
|
intvindex = index * 4;
|
|
intvmapselect = pgm_read_byte(intvmapsize + intvindex);
|
|
println_Msg(intvmapselect);
|
|
}
|
|
#endif
|
|
|
|
void setMapper_INTV() {
|
|
byte newintvmapper;
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
navigateMenu(0, intvmapcount - 1, &printMapperSelection_INTV);
|
|
newintvmapper = intvmapselect;
|
|
|
|
display.setCursor(0, 56);
|
|
print_Msg(F("MAPPER "));
|
|
print_Msg(newintvmapper);
|
|
println_Msg(F(" SELECTED"));
|
|
display_Update();
|
|
delay(1000);
|
|
#else
|
|
setmapper:
|
|
String newmap;
|
|
intvmapfound = false;
|
|
Serial.print(F("Enter Mapper [0-9]: "));
|
|
while (Serial.available() == 0) {}
|
|
newmap = Serial.readStringUntil('\n');
|
|
Serial.println(newmap);
|
|
newintvmapper = newmap.toInt();
|
|
for (int i = 0; i < intvmapcount; i++) {
|
|
intvindex = i * 4;
|
|
intvmapselect = pgm_read_byte(intvmapsize + intvindex);
|
|
if (newintvmapper == intvmapselect)
|
|
intvmapfound = true;
|
|
}
|
|
if (intvmapfound == false) {
|
|
Serial.println(F("MAPPER NOT SUPPORTED!"));
|
|
Serial.println(FS(FSTRING_EMPTY));
|
|
newintvmapper = 0;
|
|
goto setmapper;
|
|
}
|
|
#endif
|
|
EEPROM_writeAnything(7, newintvmapper);
|
|
intvmapper = newintvmapper;
|
|
}
|
|
|
|
void checkMapperSize_INTV() {
|
|
for (int i = 0; i < intvmapcount; i++) {
|
|
intvindex = i * 4;
|
|
byte mapcheck = pgm_read_byte(intvmapsize + intvindex);
|
|
if (mapcheck == intvmapper) {
|
|
intvlo = pgm_read_byte(intvmapsize + intvindex + 1);
|
|
intvhi = pgm_read_byte(intvmapsize + intvindex + 2);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
void printRomSize_INTV(int index) {
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(pgm_read_byte(&(INTV[index])));
|
|
}
|
|
#endif
|
|
|
|
void setROMSize_INTV() {
|
|
byte newintvsize;
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
display_Clear();
|
|
if (intvlo == intvhi)
|
|
newintvsize = intvlo;
|
|
else {
|
|
newintvsize = navigateMenu(intvlo, intvhi, &printRomSize_INTV);
|
|
|
|
display.setCursor(0, 56); // Display selection at bottom
|
|
}
|
|
print_Msg(F("ROM SIZE "));
|
|
print_Msg(pgm_read_byte(&(INTV[newintvsize])));
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
delay(1000);
|
|
#else
|
|
if (intvlo == intvhi)
|
|
newintvsize = intvlo;
|
|
else {
|
|
setrom:
|
|
String sizeROM;
|
|
for (int i = 0; i < (intvhi - intvlo + 1); i++) {
|
|
Serial.print(F("Select ROM Size: "));
|
|
Serial.print(i);
|
|
Serial.print(F(" = "));
|
|
Serial.print(pgm_read_byte(&(INTV[i + intvlo])));
|
|
Serial.println(F("K"));
|
|
}
|
|
Serial.print(F("Enter ROM Size: "));
|
|
while (Serial.available() == 0) {}
|
|
sizeROM = Serial.readStringUntil('\n');
|
|
Serial.println(sizeROM);
|
|
newintvsize = sizeROM.toInt() + intvlo;
|
|
if (newintvsize > intvhi) {
|
|
Serial.println(F("SIZE NOT SUPPORTED"));
|
|
Serial.println(FS(FSTRING_EMPTY));
|
|
goto setrom;
|
|
}
|
|
}
|
|
Serial.print(F("ROM Size = "));
|
|
Serial.print(pgm_read_byte(&(INTV[newintvsize])));
|
|
Serial.println(F("K"));
|
|
#endif
|
|
EEPROM_writeAnything(8, newintvsize);
|
|
intvsize = newintvsize;
|
|
}
|
|
|
|
void checkStatus_INTV() {
|
|
EEPROM_readAnything(7, intvmapper);
|
|
EEPROM_readAnything(8, intvsize);
|
|
if (intvmapper > 9) {
|
|
intvmapper = 0;
|
|
EEPROM_writeAnything(7, intvmapper);
|
|
}
|
|
if (intvsize > 5) {
|
|
intvsize = 0;
|
|
EEPROM_writeAnything(8, intvsize);
|
|
}
|
|
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
display_Clear();
|
|
println_Msg(F("INTELLIVISION READER"));
|
|
println_Msg(FS(FSTRING_CURRENT_SETTINGS));
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
print_Msg(F("MAPPER: "));
|
|
println_Msg(intvmapper);
|
|
print_Msg(F("ROM SIZE: "));
|
|
print_Msg(pgm_read_byte(&(INTV[intvsize])));
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
wait();
|
|
#else
|
|
Serial.print(F("CURRENT MAPPER: "));
|
|
Serial.println(intvmapper);
|
|
Serial.print(F("CURRENT ROM SIZE: "));
|
|
Serial.print(pgm_read_byte(&(INTV[intvsize])));
|
|
Serial.println(F("K"));
|
|
Serial.println(FS(FSTRING_EMPTY));
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// CART SELECT CODE
|
|
//******************************************
|
|
struct database_entry_INTV {
|
|
char crc_search[9];
|
|
byte gameMapper;
|
|
byte gameSize;
|
|
};
|
|
|
|
void readDataLine_INTV(FsFile& database, void* entry) {
|
|
struct database_entry_INTV* castEntry = (database_entry_INTV*)entry;
|
|
// Read CRC32 checksum
|
|
for (byte i = 0; i < 8; i++) {
|
|
checksumStr[i] = char(database.read());
|
|
}
|
|
|
|
// Skip over semicolon
|
|
database.seekCur(1);
|
|
|
|
// Read CRC32 of first 512 bytes
|
|
for (byte i = 0; i < 8; i++) {
|
|
castEntry->crc_search[i] = char(database.read());
|
|
}
|
|
|
|
// Skip over semicolon
|
|
database.seekCur(1);
|
|
|
|
// Read mapper
|
|
castEntry->gameMapper = database.read() - 48;
|
|
|
|
// Skip over semicolon
|
|
database.seekCur(1);
|
|
|
|
// Read rom size
|
|
// Read the next ascii character and subtract 48 to convert to decimal
|
|
castEntry->gameSize = ((database.read() - 48) * 10) + (database.read() - 48);
|
|
|
|
// Skip over semicolon
|
|
database.seekCur(1);
|
|
|
|
// Read SRAM size
|
|
byte sramSize __attribute__((unused)) = database.read() - 48;
|
|
|
|
// Skip rest of line
|
|
database.seekCur(2);
|
|
}
|
|
|
|
void printDataLine_INTV(void* entry) {
|
|
struct database_entry_INTV* castEntry = (database_entry_INTV*)entry;
|
|
print_Msg(F("Size: "));
|
|
print_Msg(castEntry->gameSize);
|
|
println_Msg(F("KB"));
|
|
print_Msg(F("Mapper: "));
|
|
println_Msg(castEntry->gameMapper);
|
|
}
|
|
|
|
void setCart_INTV() {
|
|
//go to root
|
|
sd.chdir();
|
|
|
|
struct database_entry_INTV entry;
|
|
|
|
// Select starting letter
|
|
byte myLetter = starting_letter();
|
|
|
|
// Open database
|
|
if (myFile.open("intv.txt", O_READ)) {
|
|
seek_first_letter_in_database(myFile, myLetter);
|
|
|
|
if(checkCartSelection(myFile, &readDataLine_INTV, &entry, &printDataLine_INTV)) {
|
|
//byte INTV[] = {8, 12, 16, 24, 32, 48};
|
|
switch (entry.gameSize) {
|
|
case 8:
|
|
intvsize = 0;
|
|
break;
|
|
|
|
case 12:
|
|
intvsize = 1;
|
|
break;
|
|
|
|
case 16:
|
|
intvsize = 2;
|
|
break;
|
|
|
|
case 24:
|
|
intvsize = 3;
|
|
break;
|
|
|
|
case 32:
|
|
intvsize = 4;
|
|
break;
|
|
|
|
case 48:
|
|
intvsize = 5;
|
|
break;
|
|
|
|
default:
|
|
intvsize = 0;
|
|
break;
|
|
}
|
|
EEPROM_writeAnything(7, entry.gameMapper);
|
|
EEPROM_writeAnything(8, intvsize);
|
|
}
|
|
} else {
|
|
print_FatalError(FS(FSTRING_DATABASE_FILE_NOT_FOUND));
|
|
}
|
|
}
|
|
#endif
|
|
//******************************************
|
|
// End of File
|
|
//******************************************
|