mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-13 08:25:05 +01:00
| .. | ||
| backplate_battery.stl | ||
| backplate_tabs.stl | ||
| combined_no_tabs.stl | ||
| n64sleeve.stl | ||
| README.md | ||
| sd_spacer.stl | ||
| sidewall_battery.stl | ||
| sidewall_tabs.stl | ||
| snes_spacer.stl | ||
Combined STL file with all parts (print out of ABS/PLA in any color you like)
Separate STL files for each part
snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot
n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough (print with one perimeter for the vertical shell and enable thin wall detection in the slicer)
backplate_tabs.stl is the backplate that holds the Arduino
sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb (print with clear PLA/ABS)
sidewall_tabs.stl secures the Arduino Mega to the backplate with five M2x8 screws
