mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-18 00:51:49 +01:00
525 lines
13 KiB
C++
525 lines
13 KiB
C++
//******************************************
|
|
// COLECOVISION MODULE
|
|
//******************************************
|
|
#ifdef enable_COLV
|
|
|
|
// Coleco Colecovision
|
|
// Cartridge Pinout
|
|
// 30P 2.54mm pitch connector
|
|
//
|
|
// FRONT SIDE BACK SIDE
|
|
// (EVEN) (ODD)
|
|
// +-------+
|
|
// /C000 -| 2 1 |- D2
|
|
// D3 -| 4 3 |- D1
|
|
// D4 -| 6 5 |- D0
|
|
// D5 -| 8 7 |- A0
|
|
// D6 -| 10 9 |- A1
|
|
// D7 -| 12 11 |- A2
|
|
// A11 -| 14 13 |- GND (SHLD)
|
|
// A10 -| 16 15 |- A3
|
|
// /8000 -| 18 17 |- A4
|
|
// A14 -| 20 19 |- A13
|
|
// /A000 -| 22 21 |- A5
|
|
// A12 -| 24 23 |- A6
|
|
// A9 -| 26 25 |- A7
|
|
// A8 -| 28 27 |- /E000
|
|
// VCC(+5V) -| 30 29 |- GND
|
|
// +-------+
|
|
|
|
// CONTROL PINS:
|
|
// CHIP SELECT PINS
|
|
// /8000(PH3) - CHIP 0 - SNES /CS
|
|
// /A000(PH4) - CHIP 1 - SNES /IRQ
|
|
// /C000(PH5) - CHIP 2 - SNES /WR
|
|
// /E000(PH6) - CHIP 3 - SNES /RD
|
|
|
|
const byte COL[] PROGMEM = { 8, 12, 16, 20, 24, 32 };
|
|
byte collo = 0; // Lowest Entry
|
|
byte colhi = 5; // Highest Entry
|
|
|
|
byte colsize;
|
|
byte newcolsize;
|
|
|
|
// EEPROM MAPPING
|
|
// 08 ROM SIZE
|
|
|
|
//******************************************
|
|
// Menu
|
|
//******************************************
|
|
// Base Menu
|
|
static const char colMenuItem1[] PROGMEM = "Select Cart";
|
|
static const char colMenuItem2[] PROGMEM = "Read ROM";
|
|
static const char colMenuItem3[] PROGMEM = "Set Size";
|
|
//static const char colMenuItem4[] PROGMEM = "Reset"; (stored in common strings array)
|
|
static const char* const menuOptionsCOL[] PROGMEM = { colMenuItem1, colMenuItem2, colMenuItem3, string_reset2 };
|
|
|
|
void setup_COL() {
|
|
// Set Address Pins to Output
|
|
// Colecovision uses A0-A14 [A15-A23 UNUSED]
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// ---(PH0) ---(PH1) /8000(PH3) /A000(PH4) /C000(PH5) /E000(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
|
|
// Setting Control Pins to HIGH
|
|
// ---(PH0) ---(PH1) /8000(PH3) /A000(PH4) /C000(PH5) /E000(PH6)
|
|
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set Unused Data Pins (PA0-PA7) to Output
|
|
DDRA = 0xFF;
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTA = 0xFF;
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
checkStatus_COL();
|
|
strcpy(romName, "COLECO");
|
|
|
|
mode = mode_COL;
|
|
}
|
|
|
|
void colMenu() {
|
|
vselect(false);
|
|
convertPgm(menuOptionsCOL, 4);
|
|
uint8_t mainMenu = question_box(F("COLECOVISION MENU"), menuOptions, 4, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Select Cart
|
|
setCart_COL();
|
|
setup_COL();
|
|
break;
|
|
|
|
case 1:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_COL();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 2:
|
|
// Set Size
|
|
setROMSize_COL();
|
|
break;
|
|
|
|
case 3:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// READ CODE
|
|
//******************************************
|
|
// CHIP SELECT CONTROL PINS
|
|
// /8000(PH3) - CHIP 0
|
|
// /A000(PH4) - CHIP 1
|
|
// /C000(PH5) - CHIP 2
|
|
// /E000(PH6) - CHIP 3
|
|
|
|
uint8_t readData_COL(uint32_t addr) {
|
|
// SELECT ROM CHIP - PULL /CE LOW
|
|
uint8_t chipdecode = ((addr >> 13) & 0x3);
|
|
if (chipdecode == 3) // CHIP 3
|
|
PORTH &= ~(1 << 6); // /E000 LOW (ENABLE)
|
|
else if (chipdecode == 2) // CHIP 2
|
|
PORTH &= ~(1 << 5); // /C000 LOW (ENABLE)
|
|
else if (chipdecode == 1) // CHIP 1
|
|
PORTH &= ~(1 << 4); // /A000 LOW (ENABLE)
|
|
else // CHIP 0
|
|
PORTH &= ~(1 << 3); // /8000 LOW (ENABLE)
|
|
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0xFF; // A8-A15
|
|
|
|
// LATCH ADDRESS - PULL /CE HIGH
|
|
PORTH |= (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6); // ALL /CE HIGH (DISABLE)
|
|
|
|
uint8_t ret = PINC;
|
|
return ret;
|
|
}
|
|
|
|
void readSegment_COL(uint32_t startaddr, uint32_t endaddr) {
|
|
for (uint32_t addr = startaddr; addr < endaddr; addr += 512) {
|
|
for (int w = 0; w < 512; w++) {
|
|
uint8_t temp = readData_COL(addr + w);
|
|
sdBuffer[w] = temp;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
|
|
void readROM_COL() {
|
|
strcpy(fileName, romName);
|
|
strcat(fileName, ".col");
|
|
|
|
// create a new folder for storing rom file
|
|
EEPROM_readAnything(0, foldern);
|
|
// sprintf(folder, "COL/ROM/%s/%d", romName, foldern);
|
|
sprintf(folder, "COL/ROM/%d", foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
display_Clear();
|
|
print_STR(saving_to_STR, 0);
|
|
print_Msg(folder);
|
|
println_Msg(F("/..."));
|
|
display_Update();
|
|
|
|
// open file on sdcard
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT))
|
|
print_FatalError(create_file_STR);
|
|
|
|
// write new folder number back to EEPROM
|
|
foldern++;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
// RESET ALL CS PINS HIGH (DISABLE)
|
|
PORTH |= (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
readSegment_COL(0x8000, 0xA000); // 8K
|
|
if (colsize > 0) {
|
|
readSegment_COL(0xA000, 0xB000); // +4K = 12K
|
|
if (colsize > 1) {
|
|
readSegment_COL(0xB000, 0xC000); // +4K = 16K
|
|
if (colsize > 2) {
|
|
readSegment_COL(0xC000, 0xD000); // +4K = 20K
|
|
if (colsize > 3) {
|
|
readSegment_COL(0xD000, 0xE000); // +4K = 24K
|
|
if (colsize > 4) {
|
|
readSegment_COL(0xE000, 0x10000); // +8K = 32K
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
myFile.close();
|
|
|
|
// RESET ALL CS PINS HIGH (DISABLE)
|
|
PORTH |= (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Compare CRC32 to database and rename ROM if found
|
|
compareCRC("colv.txt", 0, 1, 0);
|
|
|
|
println_Msg(F(""));
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
//******************************************
|
|
// ROM SIZE
|
|
//******************************************
|
|
|
|
void setROMSize_COL() {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
if (collo == colhi)
|
|
newcolsize = collo;
|
|
else {
|
|
int b = 0;
|
|
int i = collo;
|
|
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(pgm_read_byte(&(COL[i])));
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
|
|
while (1) {
|
|
b = checkButton();
|
|
if (b == 2) { // Previous (doubleclick)
|
|
if (i == collo)
|
|
i = colhi;
|
|
else
|
|
i--;
|
|
|
|
// Only update display after input because of slow LCD library
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(pgm_read_byte(&(COL[i])));
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
}
|
|
if (b == 1) { // Next (press)
|
|
if (i == colhi)
|
|
i = collo;
|
|
else
|
|
i++;
|
|
|
|
// Only update display after input because of slow LCD library
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(pgm_read_byte(&(COL[i])));
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
}
|
|
if (b == 3) { // Long Press - Execute (hold)
|
|
newcolsize = i;
|
|
break;
|
|
}
|
|
}
|
|
display.setCursor(0, 56); // Display selection at bottom
|
|
}
|
|
print_Msg(F("ROM SIZE "));
|
|
print_Msg(pgm_read_byte(&(COL[newcolsize])));
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
delay(1000);
|
|
#else
|
|
if (collo == colhi)
|
|
newcolsize = collo;
|
|
else {
|
|
setrom:
|
|
String sizeROM;
|
|
for (int i = 0; i < (colhi - collo + 1); i++) {
|
|
Serial.print(F("Select ROM Size: "));
|
|
Serial.print(i);
|
|
Serial.print(F(" = "));
|
|
Serial.print(pgm_read_byte(&(COL[i + collo])));
|
|
Serial.println(F("K"));
|
|
}
|
|
Serial.print(F("Enter ROM Size: "));
|
|
while (Serial.available() == 0) {}
|
|
sizeROM = Serial.readStringUntil('\n');
|
|
Serial.println(sizeROM);
|
|
newcolsize = sizeROM.toInt() + collo;
|
|
if (newcolsize > colhi) {
|
|
Serial.println(F("SIZE NOT SUPPORTED"));
|
|
Serial.println(F(""));
|
|
goto setrom;
|
|
}
|
|
}
|
|
Serial.print(F("ROM Size = "));
|
|
Serial.print(pgm_read_byte(&(COL[newcolsize])));
|
|
Serial.println(F("K"));
|
|
#endif
|
|
EEPROM_writeAnything(8, newcolsize);
|
|
colsize = newcolsize;
|
|
}
|
|
|
|
void checkStatus_COL() {
|
|
EEPROM_readAnything(8, colsize);
|
|
if (colsize > 5) {
|
|
colsize = 0;
|
|
EEPROM_writeAnything(8, colsize);
|
|
}
|
|
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("COLECOVISION READER"));
|
|
println_Msg(F("CURRENT SETTINGS"));
|
|
println_Msg(F(""));
|
|
print_Msg(F("ROM SIZE: "));
|
|
print_Msg(pgm_read_byte(&(COL[colsize])));
|
|
println_Msg(F("K"));
|
|
println_Msg(F(""));
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
#else
|
|
Serial.print(F("CURRENT ROM SIZE: "));
|
|
Serial.print(pgm_read_byte(&(COL[colsize])));
|
|
Serial.println(F("K"));
|
|
Serial.println(F(""));
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// CART SELECT CODE
|
|
//******************************************
|
|
void setCart_COL() {
|
|
char gamename[100];
|
|
char tempStr2[2];
|
|
char crc_search[9];
|
|
|
|
//go to root
|
|
sd.chdir();
|
|
|
|
// Select starting letter
|
|
byte myLetter = starting_letter();
|
|
|
|
// Open database
|
|
if (myFile.open("colv.txt", O_READ)) {
|
|
// Skip ahead to selected starting letter
|
|
if ((myLetter > 0) && (myLetter <= 26)) {
|
|
while (myFile.available()) {
|
|
// Read current name
|
|
get_line(gamename, &myFile, 96);
|
|
|
|
// Compare selected letter with first letter of current name until match
|
|
while (gamename[0] != 64 + myLetter) {
|
|
skip_line(&myFile);
|
|
skip_line(&myFile);
|
|
get_line(gamename, &myFile, 96);
|
|
}
|
|
break;
|
|
}
|
|
|
|
// Rewind one line
|
|
rewind_line(myFile);
|
|
}
|
|
|
|
// Display database
|
|
while (myFile.available()) {
|
|
display_Clear();
|
|
|
|
// Read game name
|
|
get_line(gamename, &myFile, 96);
|
|
|
|
// Read CRC32 checksum
|
|
sprintf(checksumStr, "%c", myFile.read());
|
|
for (byte i = 0; i < 7; i++) {
|
|
sprintf(tempStr2, "%c", myFile.read());
|
|
strcat(checksumStr, tempStr2);
|
|
}
|
|
|
|
// Skip over semicolon
|
|
myFile.seekCur(1);
|
|
|
|
// Read CRC32 of first 512 bytes
|
|
sprintf(crc_search, "%c", myFile.read());
|
|
for (byte i = 0; i < 7; i++) {
|
|
sprintf(tempStr2, "%c", myFile.read());
|
|
strcat(crc_search, tempStr2);
|
|
}
|
|
|
|
// Skip over semicolon
|
|
myFile.seekCur(1);
|
|
|
|
// Read rom size
|
|
// Read the next ascii character and subtract 48 to convert to decimal
|
|
cartSize = myFile.read() - 48;
|
|
|
|
// Remove leading 0 for single digit cart sizes
|
|
if (cartSize != 0) {
|
|
cartSize = cartSize * 10 + myFile.read() - 48;
|
|
} else {
|
|
cartSize = myFile.read() - 48;
|
|
}
|
|
|
|
// Skip rest of line
|
|
myFile.seekCur(2);
|
|
|
|
// Skip every 3rd line
|
|
skip_line(&myFile);
|
|
|
|
println_Msg(F("Select your cartridge"));
|
|
println_Msg(F(""));
|
|
println_Msg(gamename);
|
|
print_Msg(F("Size: "));
|
|
print_Msg(cartSize);
|
|
println_Msg(F("KB"));
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#elif defined(SERIAL_MONITOR)
|
|
println_Msg(F("U/D to Change"));
|
|
println_Msg(F("Space to Select"));
|
|
#endif
|
|
display_Update();
|
|
|
|
int b = 0;
|
|
while (1) {
|
|
// Check button input
|
|
b = checkButton();
|
|
|
|
// Next
|
|
if (b == 1) {
|
|
break;
|
|
}
|
|
|
|
// Previous
|
|
else if (b == 2) {
|
|
rewind_line(myFile, 6);
|
|
break;
|
|
}
|
|
|
|
// Selection
|
|
else if (b == 3) {
|
|
//byte COL[] = {8, 12, 16, 20, 24, 32};
|
|
switch (cartSize) {
|
|
case 8:
|
|
colsize = 0;
|
|
break;
|
|
|
|
case 12:
|
|
colsize = 1;
|
|
break;
|
|
|
|
case 16:
|
|
colsize = 2;
|
|
break;
|
|
|
|
case 20:
|
|
colsize = 3;
|
|
break;
|
|
|
|
case 24:
|
|
colsize = 4;
|
|
break;
|
|
|
|
case 32:
|
|
colsize = 5;
|
|
break;
|
|
|
|
default:
|
|
colsize = 0;
|
|
break;
|
|
}
|
|
EEPROM_writeAnything(8, colsize);
|
|
myFile.close();
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
print_FatalError(F("Database file not found"));
|
|
}
|
|
}
|
|
#endif
|
|
//******************************************
|
|
// End of File
|
|
//******************************************
|