mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-11 07:25:07 +01:00
0c75bf8aed
Thanks to skaman for the Sega CD Ram Cart code. Writes to the Sega CD Backup RAM Cart require an extra wire from MRES (B02) to VRES (B27).
3328 lines
94 KiB
C++
3328 lines
94 KiB
C++
//******************************************
|
||
// NINTENDO 64 MODULE
|
||
//******************************************
|
||
|
||
/******************************************
|
||
Defines
|
||
*****************************************/
|
||
// These two macros toggle the eepDataPin/ControllerDataPin between input and output
|
||
// External 1K pull-up resistor from eepDataPin to VCC required
|
||
// 0x10 = 00010000 -> Port H Pin 4
|
||
#define N64_HIGH DDRH &= ~0x10
|
||
#define N64_LOW DDRH |= 0x10
|
||
// Read the current state(0/1) of the eepDataPin
|
||
#define N64_QUERY (PINH & 0x10)
|
||
|
||
/******************************************
|
||
Variables
|
||
*****************************************/
|
||
// Received N64 Eeprom data bits, 1 page
|
||
bool tempBits[65];
|
||
int eepPages;
|
||
|
||
// N64 Controller
|
||
// 256 bits of received Controller data
|
||
char N64_raw_dump[257];
|
||
// Array that holds one Controller Pak block of 32 bytes
|
||
byte myBlock[33];
|
||
String rawStr = ""; // above char array read into a string
|
||
struct {
|
||
char stick_x;
|
||
char stick_y;
|
||
}
|
||
N64_status;
|
||
//stings that hold the buttons
|
||
String button = "N/A";
|
||
String lastbutton = "N/A";
|
||
|
||
// Rom base address
|
||
unsigned long romBase = 0x10000000;
|
||
|
||
// Flashram type
|
||
byte flashramType = 1;
|
||
boolean MN63F81MPN = false;
|
||
|
||
/******************************************
|
||
Menu
|
||
*****************************************/
|
||
// N64 start menu
|
||
static const char n64MenuItem1[] PROGMEM = "Game Cartridge";
|
||
static const char n64MenuItem2[] PROGMEM = "Controller Pak";
|
||
static const char n64MenuItem3[] PROGMEM = "Flash Repro";
|
||
static const char n64MenuItem4[] PROGMEM = "Flash Gameshark";
|
||
static const char n64MenuItem5[] PROGMEM = "Reset";
|
||
static const char* const menuOptionsN64[] PROGMEM = {n64MenuItem1, n64MenuItem2, n64MenuItem3, n64MenuItem4, n64MenuItem5};
|
||
|
||
// N64 controller menu items
|
||
static const char N64ContMenuItem1[] PROGMEM = "Test Controller";
|
||
static const char N64ContMenuItem2[] PROGMEM = "Read ControllerPak";
|
||
static const char N64ContMenuItem3[] PROGMEM = "Write ControllerPak";
|
||
static const char N64ContMenuItem4[] PROGMEM = "Reset";
|
||
static const char* const menuOptionsN64Controller[] PROGMEM = {N64ContMenuItem1, N64ContMenuItem2, N64ContMenuItem3, N64ContMenuItem4};
|
||
|
||
// N64 cart menu items
|
||
static const char N64CartMenuItem1[] PROGMEM = "Read Rom";
|
||
static const char N64CartMenuItem2[] PROGMEM = "Read Save";
|
||
static const char N64CartMenuItem3[] PROGMEM = "Write Save";
|
||
static const char N64CartMenuItem4[] PROGMEM = "Force Savetype";
|
||
static const char N64CartMenuItem5[] PROGMEM = "Reset";
|
||
static const char* const menuOptionsN64Cart[] PROGMEM = {N64CartMenuItem1, N64CartMenuItem2, N64CartMenuItem3, N64CartMenuItem4, N64CartMenuItem5};
|
||
|
||
// N64 CRC32 error menu items
|
||
static const char N64CRCMenuItem1[] PROGMEM = "Redump";
|
||
static const char N64CRCMenuItem2[] PROGMEM = "Ignore";
|
||
static const char N64CRCMenuItem3[] PROGMEM = "Reset";
|
||
static const char* const menuOptionsN64CRC[] PROGMEM = {N64CRCMenuItem1, N64CRCMenuItem2, N64CRCMenuItem3};
|
||
|
||
// Rom menu
|
||
static const char N64RomItem1[] PROGMEM = "4MB";
|
||
static const char N64RomItem2[] PROGMEM = "8MB";
|
||
static const char N64RomItem3[] PROGMEM = "12MB";
|
||
static const char N64RomItem4[] PROGMEM = "16MB";
|
||
static const char N64RomItem5[] PROGMEM = "32MB";
|
||
static const char N64RomItem6[] PROGMEM = "64MB";
|
||
static const char* const romOptionsN64[] PROGMEM = {N64RomItem1, N64RomItem2, N64RomItem3, N64RomItem4, N64RomItem5, N64RomItem6};
|
||
|
||
// Save menu
|
||
static const char N64SaveItem1[] PROGMEM = "None";
|
||
static const char N64SaveItem2[] PROGMEM = "4K EEPROM";
|
||
static const char N64SaveItem3[] PROGMEM = "16K EEPROM";
|
||
static const char N64SaveItem4[] PROGMEM = "SRAM";
|
||
static const char N64SaveItem5[] PROGMEM = "FLASHRAM";
|
||
static const char* const saveOptionsN64[] PROGMEM = {N64SaveItem1, N64SaveItem2, N64SaveItem3, N64SaveItem4, N64SaveItem5};
|
||
|
||
// N64 start menu
|
||
void n64Menu() {
|
||
// create menu with title and 3 options to choose from
|
||
unsigned char n64Dev;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(menuOptionsN64, 4);
|
||
n64Dev = question_box(F("Select N64 device"), menuOptions, 4, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (n64Dev)
|
||
{
|
||
case 0:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Cart();
|
||
printCartInfo_N64();
|
||
mode = mode_N64_Cart;
|
||
break;
|
||
|
||
case 1:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Controller();
|
||
mode = mode_N64_Controller;
|
||
break;
|
||
|
||
case 2:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Cart();
|
||
flashRepro_N64();
|
||
printCartInfo_N64();
|
||
mode = mode_N64_Cart;
|
||
break;
|
||
|
||
case 3:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Cart();
|
||
flashGameshark_N64();
|
||
printCartInfo_N64();
|
||
mode = mode_N64_Cart;
|
||
break;
|
||
|
||
case 4:
|
||
resetArduino();
|
||
break;
|
||
}
|
||
}
|
||
|
||
// N64 Controller Menu
|
||
void n64ControllerMenu() {
|
||
// create menu with title and 4 options to choose from
|
||
unsigned char mainMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(menuOptionsN64Controller, 4);
|
||
mainMenu = question_box(F("N64 Controller"), menuOptions, 4, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (mainMenu)
|
||
{
|
||
case 0:
|
||
display_Clear();
|
||
display_Update();
|
||
readController();
|
||
break;
|
||
|
||
case 1:
|
||
display_Clear();
|
||
display_Update();
|
||
readMPK();
|
||
println_Msg(F(""));
|
||
println_Msg(F("Press Button."));
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 2:
|
||
display_Clear();
|
||
display_Update();
|
||
// Change to root
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
// Launch file browser
|
||
fileBrowser(F("Select mpk file"));
|
||
display_Clear();
|
||
display_Update();
|
||
writeMPK();
|
||
verifyMPK();
|
||
println_Msg(F(""));
|
||
println_Msg(F("Press Button."));
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 3:
|
||
resetArduino();
|
||
break;
|
||
}
|
||
}
|
||
|
||
// N64 Cartridge Menu
|
||
void n64CartMenu() {
|
||
// create menu with title and 4 options to choose from
|
||
unsigned char mainMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(menuOptionsN64Cart, 5);
|
||
mainMenu = question_box(F("N64 Cart Reader"), menuOptions, 5, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (mainMenu)
|
||
{
|
||
case 0:
|
||
sd.chdir("/");
|
||
readRom_N64();
|
||
break;
|
||
|
||
case 1:
|
||
sd.chdir("/");
|
||
display_Clear();
|
||
|
||
if (saveType == 1) {
|
||
println_Msg(F("Reading Sram..."));
|
||
display_Update();
|
||
readSram(32768, 1);
|
||
}
|
||
else if (saveType == 4) {
|
||
getFramType();
|
||
println_Msg(F("Reading Flashram..."));
|
||
display_Update();
|
||
readFram(flashramType);
|
||
}
|
||
else if ((saveType == 5) || (saveType == 6)) {
|
||
println_Msg(F("Reading Eep..."));
|
||
display_Update();
|
||
readEeprom();
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), false);
|
||
}
|
||
println_Msg(F(""));
|
||
println_Msg(F("Press Button..."));
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 2:
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
if (saveType == 1) {
|
||
// Launch file browser
|
||
fileBrowser(F("Select sra file"));
|
||
display_Clear();
|
||
|
||
writeSram(32768);
|
||
writeErrors = verifySram(32768, 1);
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("Sram verified OK"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Msg(F("Error: "));
|
||
print_Msg(writeErrors);
|
||
println_Msg(F(" bytes "));
|
||
print_Error(F("did not verify."), false);
|
||
}
|
||
}
|
||
else if (saveType == 4) {
|
||
// Launch file browser
|
||
fileBrowser(F("Select fla file"));
|
||
display_Clear();
|
||
getFramType();
|
||
writeFram(flashramType);
|
||
print_Msg(F("Verifying..."));
|
||
display_Update();
|
||
writeErrors = verifyFram(flashramType);
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
println_Msg("");
|
||
print_Msg(F("Error: "));
|
||
print_Msg(writeErrors);
|
||
println_Msg(F(" bytes "));
|
||
print_Error(F("did not verify."), false);
|
||
}
|
||
}
|
||
else if ((saveType == 5) || (saveType == 6)) {
|
||
// Launch file browser
|
||
fileBrowser(F("Select eep file"));
|
||
display_Clear();
|
||
|
||
writeEeprom();
|
||
writeErrors = verifyEeprom();
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("Eeprom verified OK"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Msg(F("Error: "));
|
||
print_Msg(writeErrors);
|
||
println_Msg(F(" bytes "));
|
||
print_Error(F("did not verify."), false);
|
||
}
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), false);
|
||
}
|
||
println_Msg(F("Press Button..."));
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 3:
|
||
// create submenu with title and 6 options to choose from
|
||
unsigned char N64SaveMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(saveOptionsN64, 5);
|
||
N64SaveMenu = question_box(F("Select save type"), menuOptions, 5, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (N64SaveMenu)
|
||
{
|
||
case 0:
|
||
// None
|
||
saveType = 0;
|
||
break;
|
||
|
||
case 1:
|
||
// 4K EEPROM
|
||
saveType = 5;
|
||
eepPages = 64;
|
||
break;
|
||
|
||
case 2:
|
||
// 16K EEPROM
|
||
saveType = 6;
|
||
eepPages = 256;
|
||
break;
|
||
|
||
case 3:
|
||
// SRAM
|
||
saveType = 1;
|
||
break;
|
||
|
||
case 4:
|
||
// FLASHRAM
|
||
saveType = 4;
|
||
break;
|
||
}
|
||
break;
|
||
|
||
case 4:
|
||
resetArduino();
|
||
break;
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
Setup
|
||
*****************************************/
|
||
void setup_N64_Controller() {
|
||
// Output a low signal
|
||
PORTH &= ~(1 << 4);
|
||
// Set Controller Data Pin(PH4) to Input
|
||
DDRH &= ~(1 << 4);
|
||
}
|
||
|
||
void setup_N64_Cart() {
|
||
// Set Address Pins to Output and set them low
|
||
//A0-A7
|
||
DDRF = 0xFF;
|
||
PORTF = 0x00;
|
||
//A8-A15
|
||
DDRK = 0xFF;
|
||
PORTK = 0x00;
|
||
|
||
// Set Control Pins to Output RESET(PH0) WR(PH5) RD(PH6) aleL(PC0) aleH(PC1)
|
||
DDRH |= (1 << 0) | (1 << 5) | (1 << 6);
|
||
DDRC |= (1 << 0) | (1 << 1);
|
||
// Pull RESET(PH0) low until we are ready
|
||
PORTH &= ~(1 << 0);
|
||
// Output a high signal on WR(PH5) RD(PH6), pins are active low therefore everything is disabled now
|
||
PORTH |= (1 << 5) | (1 << 6);
|
||
// Pull aleL(PC0) low and aleH(PC1) high
|
||
PORTC &= ~(1 << 0);
|
||
PORTC |= (1 << 1);
|
||
|
||
// Set Eeprom Clock Pin(PH1) to Output
|
||
DDRH |= (1 << 1);
|
||
// Output a high signal
|
||
PORTH |= (1 << 1);
|
||
|
||
// Set Eeprom Data Pin(PH4) to Input
|
||
DDRH &= ~(1 << 4);
|
||
// Activate Internal Pullup Resistors
|
||
//PORTH |= (1 << 4);
|
||
|
||
// Set sram base address
|
||
sramBase = 0x08000000;
|
||
|
||
// Wait until all is stable
|
||
delay(300);
|
||
|
||
// Pull RESET(PH0) high to start eeprom
|
||
PORTH |= (1 << 0);
|
||
}
|
||
|
||
/******************************************
|
||
Low level functions
|
||
*****************************************/
|
||
// Switch Cartridge address/data pins to write
|
||
void adOut_N64() {
|
||
//A0-A7
|
||
DDRF = 0xFF;
|
||
PORTF = 0x00;
|
||
//A8-A15
|
||
DDRK = 0xFF;
|
||
PORTK = 0x00;
|
||
}
|
||
|
||
// Switch Cartridge address/data pins to read
|
||
void adIn_N64() {
|
||
//A0-A7
|
||
DDRF = 0x00;
|
||
//A8-A15
|
||
DDRK = 0x00;
|
||
}
|
||
|
||
// Set Cartridge address
|
||
void setAddress_N64(unsigned long myAddress) {
|
||
// Set address pins to output
|
||
adOut_N64();
|
||
|
||
// Split address into two words
|
||
word myAdrLowOut = myAddress & 0xFFFF;
|
||
word myAdrHighOut = myAddress >> 16;
|
||
|
||
// Switch WR(PH5) RD(PH6) ale_L(PC0) ale_H(PC1) to high (since the pins are active low)
|
||
PORTH |= (1 << 5) | (1 << 6);
|
||
PORTC |= (1 << 1);
|
||
__asm__("nop\n\t");
|
||
PORTC |= (1 << 0);
|
||
|
||
// Output high part to address pins
|
||
PORTF = myAdrHighOut & 0xFF;
|
||
PORTK = (myAdrHighOut >> 8) & 0xFF;
|
||
|
||
// Leave ale_H high for additional 62.5ns
|
||
__asm__("nop\n\t");
|
||
|
||
// Pull ale_H(PC1) low
|
||
PORTC &= ~(1 << 1);
|
||
|
||
// Output low part to address pins
|
||
PORTF = myAdrLowOut & 0xFF;
|
||
PORTK = (myAdrLowOut >> 8) & 0xFF;
|
||
|
||
// Leave ale_L high for ~125ns
|
||
__asm__("nop\n\t""nop\n\t");
|
||
|
||
// Pull ale_L(PC0) low
|
||
PORTC &= ~(1 << 0);
|
||
|
||
// Wait ~600ns just to be sure address is set
|
||
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
|
||
|
||
// Set data pins to input
|
||
adIn_N64();
|
||
}
|
||
|
||
// Read one word out of the cartridge
|
||
word readWord_N64() {
|
||
// Pull read(PH6) low
|
||
PORTH &= ~(1 << 6);
|
||
|
||
// Wait ~310ns
|
||
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
|
||
|
||
// Join bytes from PINF and PINK into a word
|
||
word tempWord = ( ( PINK & 0xFF ) << 8 ) | ( PINF & 0xFF );
|
||
|
||
// Pull read(PH6) high
|
||
PORTH |= (1 << 6);
|
||
|
||
// Wait 62.5ns
|
||
__asm__("nop\n\t");
|
||
return tempWord;
|
||
}
|
||
|
||
// Write one word to data pins of the cartridge
|
||
void writeWord_N64(word myWord) {
|
||
// Set address pins to output
|
||
adOut_N64();
|
||
|
||
// Output word to AD0-AD15
|
||
PORTF = myWord & 0xFF;
|
||
PORTK = (myWord >> 8) & 0xFF;
|
||
|
||
// Wait ~62.5ns
|
||
__asm__("nop\n\t");
|
||
|
||
// Pull write(PH5) low
|
||
PORTH &= ~(1 << 5);
|
||
|
||
// Wait ~310ns
|
||
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
|
||
|
||
// Pull write(PH5) high
|
||
PORTH |= (1 << 5);
|
||
|
||
// Wait ~125ns
|
||
__asm__("nop\n\t""nop\n\t");
|
||
|
||
// Set data pins to input
|
||
adIn_N64();
|
||
}
|
||
|
||
/******************************************
|
||
N64 Controller CRC Functions
|
||
*****************************************/
|
||
static word addrCRC(word address) {
|
||
// CRC table
|
||
word xor_table[16] = { 0x0, 0x0, 0x0, 0x0, 0x0, 0x15, 0x1F, 0x0B, 0x16, 0x19, 0x07, 0x0E, 0x1C, 0x0D, 0x1A, 0x01 };
|
||
word crc = 0;
|
||
// Make sure we have a valid address
|
||
address &= ~0x1F;
|
||
// Go through each bit in the address, and if set, xor the right value into the output
|
||
for (int i = 15; i >= 5; i--) {
|
||
// Is this bit set?
|
||
if ( ((address >> i) & 0x1)) {
|
||
crc ^= xor_table[i];
|
||
}
|
||
}
|
||
// Just in case
|
||
crc &= 0x1F;
|
||
// Create a new address with the CRC appended
|
||
return address | crc;
|
||
}
|
||
|
||
// unused
|
||
//static byte dataCRC(byte * data) {
|
||
// byte ret = 0;
|
||
// for (byte i = 0; i <= 32; i++) {
|
||
// for (byte j = 7; j >= 0; j--) {
|
||
// int tmp = 0;
|
||
// if (ret & 0x80) {
|
||
// tmp = 0x85;
|
||
// }
|
||
// ret <<= 1;
|
||
// if ( i < 32 ) {
|
||
// if (data[i] & (0x01 << j)) {
|
||
// ret |= 0x1;
|
||
// }
|
||
// }
|
||
// ret ^= tmp;
|
||
// }
|
||
// }
|
||
// return ret;
|
||
//}
|
||
|
||
/******************************************
|
||
N64 Controller Protocol Functions
|
||
*****************************************/
|
||
void N64_send(unsigned char *buffer, char length) {
|
||
// Send these bytes
|
||
char bits;
|
||
|
||
// This routine is very carefully timed by examining the assembly output.
|
||
// Do not change any statements, it could throw the timings off
|
||
//
|
||
// We get 16 cycles per microsecond, which should be plenty, but we need to
|
||
// be conservative. Most assembly ops take 1 cycle, but a few take 2
|
||
//
|
||
// I use manually constructed for-loops out of gotos so I have more control
|
||
// over the outputted assembly. I can insert nops where it was impossible
|
||
// with a for loop
|
||
|
||
asm volatile (";Starting outer for loop");
|
||
outer_loop:
|
||
{
|
||
asm volatile (";Starting inner for loop");
|
||
bits = 8;
|
||
inner_loop:
|
||
{
|
||
// Starting a bit, set the line low
|
||
asm volatile (";Setting line to low");
|
||
N64_LOW; // 1 op, 2 cycles
|
||
|
||
asm volatile (";branching");
|
||
if (*buffer >> 7) {
|
||
asm volatile (";Bit is a 1");
|
||
// 1 bit
|
||
// remain low for 1us, then go high for 3us
|
||
// nop block 1
|
||
asm volatile ("nop\nnop\nnop\nnop\nnop\n");
|
||
|
||
asm volatile (";Setting line to high");
|
||
N64_HIGH;
|
||
|
||
// nop block 2
|
||
// we'll wait only 2us to sync up with both conditions
|
||
// at the bottom of the if statement
|
||
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
);
|
||
|
||
}
|
||
else {
|
||
asm volatile (";Bit is a 0");
|
||
// 0 bit
|
||
// remain low for 3us, then go high for 1us
|
||
// nop block 3
|
||
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\n");
|
||
|
||
asm volatile (";Setting line to high");
|
||
N64_HIGH;
|
||
|
||
// wait for 1us
|
||
asm volatile ("; end of conditional branch, need to wait 1us more before next bit");
|
||
|
||
}
|
||
// end of the if, the line is high and needs to remain
|
||
// high for exactly 16 more cycles, regardless of the previous
|
||
// branch path
|
||
|
||
asm volatile (";finishing inner loop body");
|
||
--bits;
|
||
if (bits != 0) {
|
||
// nop block 4
|
||
// this block is why a for loop was impossible
|
||
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\n");
|
||
// rotate bits
|
||
asm volatile (";rotating out bits");
|
||
*buffer <<= 1;
|
||
|
||
goto inner_loop;
|
||
} // fall out of inner loop
|
||
}
|
||
asm volatile (";continuing outer loop");
|
||
// In this case: the inner loop exits and the outer loop iterates,
|
||
// there are /exactly/ 16 cycles taken up by the necessary operations.
|
||
// So no nops are needed here (that was lucky!)
|
||
--length;
|
||
if (length != 0) {
|
||
++buffer;
|
||
goto outer_loop;
|
||
} // fall out of outer loop
|
||
}
|
||
}
|
||
|
||
void N64_stop() {
|
||
// send a single stop (1) bit
|
||
// nop block 5
|
||
asm volatile ("nop\nnop\nnop\nnop\n");
|
||
N64_LOW;
|
||
// wait 1 us, 16 cycles, then raise the line
|
||
// 16-2=14
|
||
// nop block 6
|
||
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\n");
|
||
N64_HIGH;
|
||
}
|
||
|
||
void N64_get(word bitcount) {
|
||
// listen for the expected bitcount/8 bytes of data back from the controller and
|
||
// blast it out to the N64_raw_dump array, one bit per byte for extra speed.
|
||
asm volatile (";Starting to listen");
|
||
unsigned char timeout;
|
||
char *bitbin = N64_raw_dump;
|
||
|
||
// Again, using gotos here to make the assembly more predictable and
|
||
// optimization easier (please don't kill me)
|
||
read_loop:
|
||
timeout = 0x3f;
|
||
// wait for line to go low
|
||
while (N64_QUERY) {
|
||
if (!--timeout)
|
||
return;
|
||
}
|
||
// wait approx 2us and poll the line
|
||
asm volatile (
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
"nop\nnop\nnop\nnop\nnop\n"
|
||
);
|
||
*bitbin = N64_QUERY;
|
||
++bitbin;
|
||
--bitcount;
|
||
if (bitcount == 0)
|
||
return;
|
||
|
||
// wait for line to go high again
|
||
// it may already be high, so this should just drop through
|
||
timeout = 0x3f;
|
||
while (!N64_QUERY) {
|
||
if (!--timeout)
|
||
return;
|
||
}
|
||
goto read_loop;
|
||
}
|
||
|
||
/******************************************
|
||
N64 Controller Functions
|
||
*****************************************/
|
||
void get_button()
|
||
{
|
||
// Command to send to the gamecube
|
||
// The last bit is rumble, flip it to rumble
|
||
// yes this does need to be inside the loop, the
|
||
// array gets mutilated when it goes through N64_send
|
||
unsigned char command[] = {
|
||
0x01
|
||
};
|
||
|
||
// don't want interrupts getting in the way
|
||
noInterrupts();
|
||
// send those 3 bytes
|
||
N64_send(command, 1);
|
||
N64_stop();
|
||
// read in 32bits of data and dump it to N64_raw_dump
|
||
N64_get(32);
|
||
// end of time sensitive code
|
||
interrupts();
|
||
|
||
// The get_N64_status function sloppily dumps its data 1 bit per byte
|
||
// into the get_status_extended char array. It's our job to go through
|
||
// that and put each piece neatly into the struct N64_status
|
||
int i;
|
||
memset(&N64_status, 0, sizeof(N64_status));
|
||
|
||
// bits: joystick x value
|
||
// These are 8 bit values centered at 0x80 (128)
|
||
for (i = 0; i < 8; i++) {
|
||
N64_status.stick_x |= N64_raw_dump[16 + i] ? (0x80 >> i) : 0;
|
||
}
|
||
for (i = 0; i < 8; i++) {
|
||
N64_status.stick_y |= N64_raw_dump[24 + i] ? (0x80 >> i) : 0;
|
||
}
|
||
|
||
// read char array N64_raw_dump into string rawStr
|
||
rawStr = "";
|
||
for (i = 0; i < 16; i++) {
|
||
rawStr = rawStr + String(N64_raw_dump[i], DEC);
|
||
}
|
||
|
||
// Buttons (A,B,Z,S,DU,DD,DL,DR,0,0,L,R,CU,CD,CL,CR)
|
||
if (rawStr.substring(0, 16) == "0000000000000000") {
|
||
lastbutton = button;
|
||
button = F("Press a button");
|
||
}
|
||
else
|
||
{
|
||
for (int i = 0; i < 16; i++)
|
||
{
|
||
// seems to be 16, 8 or 4 depending on what pin is used
|
||
if (N64_raw_dump[i] == 16)
|
||
{
|
||
switch (i)
|
||
{
|
||
case 7:
|
||
button = F("D-Right");
|
||
break;
|
||
|
||
case 6:
|
||
button = F("D-Left");
|
||
break;
|
||
|
||
case 5:
|
||
button = F("D-Down");
|
||
break;
|
||
|
||
case 4:
|
||
button = F("D-Up");
|
||
break;
|
||
|
||
case 3:
|
||
button = F("START");
|
||
break;
|
||
|
||
case 2:
|
||
button = F("Z");
|
||
break;
|
||
|
||
case 1:
|
||
button = F("B");
|
||
break;
|
||
|
||
case 0:
|
||
button = F("A");
|
||
break;
|
||
|
||
case 15:
|
||
button = F("C-Right");
|
||
break;
|
||
|
||
case 14:
|
||
button = F("C-Left");
|
||
break;
|
||
|
||
case 13:
|
||
button = F("C-Down");
|
||
break;
|
||
|
||
case 12:
|
||
button = F("C-Up");
|
||
break;
|
||
|
||
case 11:
|
||
button = F("R");
|
||
break;
|
||
|
||
case 10:
|
||
button = F("L");
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
void readController() {
|
||
bool quit = 1;
|
||
|
||
while (quit) {
|
||
display_Clear();
|
||
|
||
// Get Button and analog stick
|
||
get_button();
|
||
|
||
println_Msg(F("Controller Test"));
|
||
println_Msg("");
|
||
println_Msg(button);
|
||
println_Msg("");
|
||
String stickx = String("X: " + String(N64_status.stick_x, DEC) + " ");
|
||
println_Msg(stickx);
|
||
String sticky = String("Y: " + String(N64_status.stick_y, DEC) + " ");
|
||
println_Msg(sticky);
|
||
println_Msg("");
|
||
println_Msg(F("Press START to quit"));
|
||
|
||
display_Update();
|
||
delay(100);
|
||
|
||
if (button == F("START")) {
|
||
quit = 0;
|
||
}
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
N64 Controller Pak Functions
|
||
(connected via Controller)
|
||
*****************************************/
|
||
// read 32bytes from controller pak
|
||
void readBlock(word myAddress) {
|
||
// Calculate the address CRC
|
||
word myAddressCRC = addrCRC(myAddress);
|
||
|
||
// Read Controller Pak command
|
||
unsigned char command[] = {0x02};
|
||
// Address Command
|
||
unsigned char addressHigh[] = {(unsigned char)(myAddressCRC >> 8)};
|
||
unsigned char addressLow[] = {(unsigned char)(myAddressCRC & 0xff)};
|
||
|
||
// don't want interrupts getting in the way
|
||
noInterrupts();
|
||
// send those 3 bytes
|
||
N64_send(command, 1);
|
||
N64_send(addressHigh, 1);
|
||
N64_send(addressLow, 1);
|
||
N64_stop();
|
||
// read in data
|
||
N64_get(256);
|
||
// end of time sensitive code
|
||
interrupts();
|
||
|
||
// Empty N64_raw_dump into myBlock
|
||
for (word i = 0; i < 256; i += 8) {
|
||
boolean byteFlipped[9];
|
||
|
||
// Flip byte order
|
||
byteFlipped[0] = N64_raw_dump[i + 7];
|
||
byteFlipped[1] = N64_raw_dump[i + 6];
|
||
byteFlipped[2] = N64_raw_dump[i + 5];
|
||
byteFlipped[3] = N64_raw_dump[i + 4];
|
||
byteFlipped[4] = N64_raw_dump[i + 3];
|
||
byteFlipped[5] = N64_raw_dump[i + 2];
|
||
byteFlipped[6] = N64_raw_dump[i + 1];
|
||
byteFlipped[7] = N64_raw_dump[i + 0];
|
||
|
||
// Join bits into one byte
|
||
unsigned char myByte = 0;
|
||
for (byte j = 0; j < 8; ++j) {
|
||
if (byteFlipped[j]) {
|
||
myByte |= 1 << j;
|
||
}
|
||
}
|
||
// Save byte into block array
|
||
myBlock[i / 8] = myByte;
|
||
}
|
||
}
|
||
|
||
// reads the MPK file to the sd card
|
||
void readMPK() {
|
||
// Change to root
|
||
sd.chdir("/");
|
||
// Make MPK directory
|
||
sd.mkdir("N64/MPK", true);
|
||
// Change to MPK directory
|
||
sd.chdir("N64/MPK");
|
||
|
||
// Get name, add extension and convert to char array for sd lib
|
||
EEPROM_readAnything(10, foldern);
|
||
sprintf(fileName, "%d", foldern);
|
||
strcat(fileName, ".mpk");
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(10, foldern);
|
||
|
||
//open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_Error(F("Can't open file on SD"), true);
|
||
}
|
||
|
||
println_Msg(F("Please wait..."));
|
||
display_Update();
|
||
|
||
// Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
|
||
for (word i = 0x0000; i < 0x8000; i += 32) {
|
||
// Read one block of the Controller Pak into array myBlock
|
||
readBlock(i);
|
||
// Write block to SD card
|
||
for (byte j = 0; j < 32; j++) {
|
||
myFile.write(myBlock[j]);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
print_Msg(F("Saved as N64/MPK/"));
|
||
println_Msg(fileName);
|
||
display_Update();
|
||
}
|
||
|
||
void writeMPK() {
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
println_Msg(F("Writing..."));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
for (word myAddress = 0x0000; myAddress < 0x8000; myAddress += 32) {
|
||
// Read 32 bytes into SD buffer
|
||
myFile.read(sdBuffer, 32);
|
||
|
||
// Calculate the address CRC
|
||
word myAddressCRC = addrCRC(myAddress);
|
||
|
||
// Write Controller Pak command
|
||
unsigned char command[] = {0x03};
|
||
// Address Command
|
||
unsigned char addressHigh[] = {(unsigned char)(myAddressCRC >> 8)};
|
||
unsigned char addressLow[] = {(unsigned char)(myAddressCRC & 0xff)};
|
||
|
||
// don't want interrupts getting in the way
|
||
noInterrupts();
|
||
// Send write command
|
||
N64_send(command, 1);
|
||
// Send block number
|
||
N64_send(addressHigh, 1);
|
||
N64_send(addressLow, 1);
|
||
// Send data to write
|
||
N64_send(sdBuffer, 32);
|
||
// Send stop
|
||
N64_stop();
|
||
// Enable interrupts
|
||
interrupts();
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
println_Msg(F("Done"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Error(F("Can't create file on SD"), true);
|
||
}
|
||
}
|
||
|
||
// verifies if write was successful
|
||
void verifyMPK() {
|
||
writeErrors = 0;
|
||
|
||
println_Msg(F("Verifying..."));
|
||
display_Update();
|
||
|
||
//open file on sd card
|
||
if (!myFile.open(filePath, O_RDWR | O_CREAT)) {
|
||
print_Error(F("Can't create file on SD"), true);
|
||
}
|
||
|
||
// Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
|
||
for (word i = 0x0000; i < 0x8000; i += 32) {
|
||
// Read one block of the Controller Pak into array myBlock
|
||
readBlock(i);
|
||
// Check against file on SD card
|
||
for (byte j = 0; j < 32; j++) {
|
||
if (myFile.read() != myBlock[j]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Msg(F("Error: "));
|
||
print_Msg(writeErrors);
|
||
println_Msg(F(" bytes "));
|
||
print_Error(F("did not verify."), false);
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
N64 Cartridge functions
|
||
*****************************************/
|
||
void printCartInfo_N64() {
|
||
// Check cart
|
||
getCartInfo_N64();
|
||
|
||
// Print start page
|
||
if (cartSize != 0) {
|
||
println_Msg(F("N64 Cartridge Info"));
|
||
println_Msg(F(""));
|
||
print_Msg(F("Name: "));
|
||
println_Msg(romName);
|
||
print_Msg(F("ID: "));
|
||
print_Msg(cartID);
|
||
print_Msg(F(" Size: "));
|
||
print_Msg(cartSize);
|
||
println_Msg(F("MB"));
|
||
print_Msg(F("Save: "));
|
||
switch (saveType) {
|
||
case 1:
|
||
println_Msg(F("Sram"));
|
||
break;
|
||
case 4:
|
||
println_Msg(F("Flashram"));
|
||
break;
|
||
case 5:
|
||
println_Msg(F("4K Eeprom"));
|
||
eepPages = 64;
|
||
break;
|
||
case 6:
|
||
println_Msg(F("16K Eeprom"));
|
||
eepPages = 256;
|
||
break;
|
||
default:
|
||
println_Msg(F("unknown"));
|
||
break;
|
||
}
|
||
print_Msg(F("Version: 1."));
|
||
println_Msg(romVersion);
|
||
|
||
// Wait for user input
|
||
println_Msg(F(" "));
|
||
println_Msg(F("Press Button..."));
|
||
display_Update();
|
||
wait();
|
||
}
|
||
else {
|
||
// Display error
|
||
println_Msg(F("GAMEPAK ERROR"));
|
||
println_Msg("");
|
||
print_Msg(F("Name: "));
|
||
println_Msg(romName);
|
||
print_Msg(F("ID: "));
|
||
println_Msg(cartID);
|
||
println_Msg("");
|
||
display_Update();
|
||
|
||
strcpy(romName, "GPERROR");
|
||
print_Error(F("Cartridge unknown"), false);
|
||
wait();
|
||
|
||
// Set cartsize manually
|
||
unsigned char N64RomMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(romOptionsN64, 6);
|
||
N64RomMenu = question_box(F("Select ROM size"), menuOptions, 6, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (N64RomMenu)
|
||
{
|
||
case 0:
|
||
// 4MB
|
||
cartSize = 4;
|
||
break;
|
||
|
||
case 1:
|
||
// 8MB
|
||
cartSize = 8;
|
||
break;
|
||
|
||
case 2:
|
||
// 12MB
|
||
cartSize = 12;
|
||
break;
|
||
|
||
case 3:
|
||
// 16MB
|
||
cartSize = 16;
|
||
break;
|
||
|
||
case 4:
|
||
// 32MB
|
||
cartSize = 32;
|
||
break;
|
||
|
||
case 5:
|
||
// 64MB
|
||
cartSize = 64;
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
|
||
// CRC32 lookup table // 256 entries
|
||
static const uint32_t crc_32_tab[] PROGMEM = { /* CRC polynomial 0xedb88320 */
|
||
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
|
||
0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
|
||
0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
|
||
0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
|
||
0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
|
||
0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
|
||
0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
|
||
0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
|
||
0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
|
||
0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
|
||
0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
|
||
0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
|
||
0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
|
||
0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
|
||
0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
|
||
0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
|
||
0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
|
||
0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
|
||
0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
|
||
0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
|
||
0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
|
||
0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
|
||
0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
|
||
0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
|
||
0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
|
||
0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
|
||
0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
|
||
0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
|
||
0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
|
||
0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
|
||
0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
|
||
0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
|
||
0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
|
||
0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
|
||
0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
|
||
0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
|
||
0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
|
||
0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
|
||
0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
|
||
0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
|
||
0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
|
||
0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
|
||
0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
|
||
};
|
||
|
||
// look-up the calculated crc in the file n64.txt on sd card
|
||
boolean searchCRC(char crcStr[9]) {
|
||
boolean result = 0;
|
||
char tempStr2[2];
|
||
char tempStr1[9];
|
||
char tempStr[5];
|
||
|
||
// Change to root dir
|
||
sd.chdir("/");
|
||
|
||
if (myFile.open("n64.txt", O_READ)) {
|
||
// Loop through file
|
||
while (myFile.available()) {
|
||
// Read 8 bytes into String, do it one at a time so byte order doesn't get mixed up
|
||
sprintf(tempStr1, "%c", myFile.read());
|
||
for (byte i = 0; i < 7; i++) {
|
||
sprintf(tempStr2, "%c", myFile.read());
|
||
strcat(tempStr1, tempStr2);
|
||
}
|
||
|
||
// Check if string is a match
|
||
if (strcmp(tempStr1, crcStr) == 0) {
|
||
// Skip the , in the file
|
||
myFile.seekSet(myFile.curPosition() + 1);
|
||
|
||
// Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up
|
||
sprintf(tempStr, "%c", myFile.read());
|
||
for (byte i = 0; i < 3; i++) {
|
||
sprintf(tempStr2, "%c", myFile.read());
|
||
strcat(tempStr, tempStr2);
|
||
}
|
||
|
||
if (strcmp(tempStr, cartID) == 0) {
|
||
result = 1;
|
||
break;
|
||
}
|
||
else {
|
||
result = 0;
|
||
break;
|
||
}
|
||
}
|
||
// If no match, empty string, advance by 12 and try again
|
||
else {
|
||
myFile.seekSet(myFile.curPosition() + 12);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
return result;
|
||
}
|
||
else {
|
||
print_Error(F("N64.txt missing"), true);
|
||
}
|
||
}
|
||
|
||
// look-up cart id in file n64.txt on sd card
|
||
void getCartInfo_N64() {
|
||
char tempStr2[2];
|
||
char tempStr[5];
|
||
|
||
// cart not in list
|
||
cartSize = 0;
|
||
saveType = 0;
|
||
|
||
// Read cart id
|
||
idCart();
|
||
|
||
if (myFile.open("n64.txt", O_READ)) {
|
||
// Skip over the first crc
|
||
myFile.seekSet(myFile.curPosition() + 9);
|
||
// Loop through file
|
||
while (myFile.available()) {
|
||
// Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up
|
||
sprintf(tempStr, "%c", myFile.read());
|
||
for (byte i = 0; i < 3; i++) {
|
||
sprintf(tempStr2, "%c", myFile.read());
|
||
strcat(tempStr, tempStr2);
|
||
}
|
||
|
||
// Check if string is a match
|
||
if (strcmp(tempStr, cartID) == 0) {
|
||
// Skip the , in the file
|
||
myFile.seekSet(myFile.curPosition() + 1);
|
||
|
||
// Read the next ascii character and subtract 48 to convert to decimal
|
||
cartSize = myFile.read() - 48;
|
||
// Remove leading 0 for single digit cart sizes
|
||
if (cartSize != 0) {
|
||
cartSize = cartSize * 10 + myFile.read() - 48;
|
||
}
|
||
else {
|
||
cartSize = myFile.read() - 48;
|
||
}
|
||
|
||
// Skip the , in the file
|
||
myFile.seekSet(myFile.curPosition() + 1);
|
||
|
||
// Read the next ascii character and subtract 48 to convert to decimal
|
||
saveType = myFile.read() - 48;
|
||
}
|
||
// If no match, empty string, advance by 16 and try again
|
||
else {
|
||
myFile.seekSet(myFile.curPosition() + 16);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
else {
|
||
print_Error(F("N64.txt missing"), true);
|
||
}
|
||
}
|
||
|
||
// Read rom ID
|
||
void idCart() {
|
||
// Set the address
|
||
setAddress_N64(romBase);
|
||
// Read first 64 bytes of rom
|
||
for (int c = 0; c < 64; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
|
||
// Get cart id
|
||
cartID[0] = sdBuffer[0x3B];
|
||
cartID[1] = sdBuffer[0x3C];
|
||
cartID[2] = sdBuffer[0x3D];
|
||
cartID[3] = sdBuffer[0x3E];
|
||
|
||
// Get rom version
|
||
romVersion = sdBuffer[0x3F];
|
||
|
||
// Get name
|
||
byte myLength = 0;
|
||
for (unsigned int i = 0; i < 20; i++) {
|
||
if (((char(sdBuffer[0x20 + i]) >= 48 && char(sdBuffer[0x20 + i]) <= 57) || (char(sdBuffer[0x20 + i]) >= 65 && char(sdBuffer[0x20 + i]) <= 122)) && myLength < 15) {
|
||
romName[myLength] = char(sdBuffer[0x20 + i]);
|
||
myLength++;
|
||
}
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
Eeprom functions
|
||
*****************************************/
|
||
// Send a clock pulse of 2us length, 50% duty, 500kHz
|
||
void pulseClock_N64(unsigned int times) {
|
||
for (unsigned int i = 0; i < (times * 2); i++) {
|
||
// Switch the clock pin to 0 if it's 1 and 0 if it's 1
|
||
PORTH ^= (1 << 1);
|
||
// without the delay the clock pulse would be 1.5us and 666kHz
|
||
//__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"));
|
||
}
|
||
}
|
||
|
||
// Send one byte of data to eeprom
|
||
void sendData(byte data) {
|
||
for (byte i = 0; i < 8; i++) {
|
||
// pull data line low
|
||
N64_LOW;
|
||
|
||
// if current bit is 1, pull high after ~1us, 2 cycles
|
||
if (data >> 7) {
|
||
pulseClock_N64(2);
|
||
N64_HIGH;
|
||
pulseClock_N64(6);
|
||
}
|
||
// if current bit is 0 pull high after ~3us, 6 cycles
|
||
else {
|
||
pulseClock_N64(6);
|
||
N64_HIGH;
|
||
pulseClock_N64(2);
|
||
}
|
||
|
||
// rotate to the next bit
|
||
data <<= 1;
|
||
}
|
||
}
|
||
|
||
// Send stop bit to eeprom
|
||
void sendStop() {
|
||
N64_LOW;
|
||
pulseClock_N64(2);
|
||
N64_HIGH;
|
||
pulseClock_N64(4);
|
||
}
|
||
|
||
// Capture 8 bytes in 64 bits into bit array tempBits
|
||
void readData() {
|
||
for (byte i = 0; i < 64; i++) {
|
||
|
||
// pulse clock until we get response from eeprom
|
||
while (N64_QUERY) {
|
||
pulseClock_N64(1);
|
||
}
|
||
|
||
// Skip over the 1us low part of a high bit
|
||
pulseClock_N64(3);
|
||
|
||
// Read bit
|
||
tempBits[i] = N64_QUERY;
|
||
|
||
// wait for line to go high again
|
||
while (!N64_QUERY) {
|
||
pulseClock_N64(1);
|
||
}
|
||
}
|
||
}
|
||
|
||
// Write Eeprom to cartridge
|
||
void writeEeprom() {
|
||
if ((saveType == 5) || (saveType == 6)) {
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
println_Msg(F("Writing..."));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
|
||
for (byte i = 0; i < (eepPages / 64); i++) {
|
||
myFile.read(sdBuffer, 512);
|
||
// Disable interrupts for more uniform clock pulses
|
||
noInterrupts();
|
||
|
||
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
|
||
// Wait ~50ms between page writes or eeprom will have write errors
|
||
pulseClock_N64(26000);
|
||
|
||
// Send write command
|
||
sendData(0x05);
|
||
// Send page number
|
||
sendData(pageNumber + (i * 64));
|
||
// Send data to write
|
||
for (byte j = 0; j < 8; j++) {
|
||
sendData(sdBuffer[(pageNumber * 8) + j]);
|
||
}
|
||
sendStop();
|
||
}
|
||
interrupts();
|
||
}
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
println_Msg(F("Done"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
}
|
||
|
||
// Dump Eeprom to SD
|
||
void readEeprom() {
|
||
if ((saveType == 5) || (saveType == 6)) {
|
||
|
||
// Wait 50ms or eeprom might lock up
|
||
pulseClock_N64(26000);
|
||
|
||
// Get name, add extension and convert to char array for sd lib
|
||
strcpy(fileName, romName);
|
||
strcat(fileName, ".eep");
|
||
|
||
// create a new folder for the save file
|
||
EEPROM_readAnything(10, foldern);
|
||
sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
|
||
sd.mkdir(folder, true);
|
||
sd.chdir(folder);
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(10, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_Error(F("Can't create file on SD"), true);
|
||
}
|
||
|
||
for (byte i = 0; i < (eepPages / 64); i++) {
|
||
// Disable interrupts for more uniform clock pulses
|
||
noInterrupts();
|
||
|
||
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
|
||
// Send read command
|
||
sendData(0x04);
|
||
// Send Page number
|
||
sendData(pageNumber + (i * 64));
|
||
// Send stop bit
|
||
sendStop();
|
||
|
||
// read data
|
||
readData();
|
||
sendStop();
|
||
|
||
// OR 8 bits into one byte for a total of 8 bytes
|
||
for (byte j = 0; j < 64; j += 8) {
|
||
sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
|
||
}
|
||
// Wait 50ms between pages or eeprom might lock up
|
||
pulseClock_N64(26000);
|
||
}
|
||
interrupts();
|
||
|
||
// Write 64 pages at once to the SD card
|
||
myFile.write(sdBuffer, 512);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
//clear the screen
|
||
display_Clear();
|
||
print_Msg(F("Saved to "));
|
||
print_Msg(folder);
|
||
println_Msg(F("/"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
}
|
||
|
||
// Check if a write succeeded, returns 0 if all is ok and number of errors if not
|
||
unsigned long verifyEeprom() {
|
||
if ((saveType == 5) || (saveType == 6)) {
|
||
writeErrors = 0;
|
||
|
||
// Wait 50ms or eeprom might lock up
|
||
pulseClock_N64(26000);
|
||
|
||
print_Msg(F("Verifying against "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
|
||
for (byte i = 0; i < (eepPages / 64); i++) {
|
||
// Disable interrupts for more uniform clock pulses
|
||
noInterrupts();
|
||
|
||
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
|
||
// Send read command
|
||
sendData(0x04);
|
||
// Send Page number
|
||
sendData(pageNumber + (i * 64));
|
||
// Send stop bit
|
||
sendStop();
|
||
|
||
// read data
|
||
readData();
|
||
sendStop();
|
||
|
||
// OR 8 bits into one byte for a total of 8 bytes
|
||
for (byte j = 0; j < 64; j += 8) {
|
||
sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
|
||
}
|
||
// Wait 50ms between pages or eeprom might lock up
|
||
pulseClock_N64(26000);
|
||
}
|
||
interrupts();
|
||
|
||
// Check sdBuffer content against file on sd card
|
||
for (int c = 0; c < 512; c++) {
|
||
if (myFile.read() != sdBuffer[c]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
else {
|
||
// SD Error
|
||
writeErrors = 999999;
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
// Return 0 if verified ok, or number of errors
|
||
return writeErrors;
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
SRAM functions
|
||
*****************************************/
|
||
// Write sram to cartridge
|
||
void writeSram(unsigned long sramSize) {
|
||
if (saveType == 1) {
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
println_Msg(F("Writing..."));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + sramSize); currByte += 512) {
|
||
|
||
// Read save from SD into buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Set the address for the next 512 bytes
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
// Join bytes to word
|
||
word myWord = ( ( sdBuffer[c] & 0xFF ) << 8 ) | ( sdBuffer[c + 1] & 0xFF );
|
||
|
||
// Write word
|
||
writeWord_N64(myWord);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
println_Msg(F("Done"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
}
|
||
|
||
// Read sram and save to the SD card
|
||
void readSram(unsigned long sramSize, byte flashramType) {
|
||
int offset = 512;
|
||
int bufferSize = 512;
|
||
if (flashramType == 2) {
|
||
offset = 64;
|
||
bufferSize = 128;
|
||
}
|
||
|
||
// Get name, add extension and convert to char array for sd lib
|
||
strcpy(fileName, romName);
|
||
|
||
if (saveType == 4) {
|
||
strcat(fileName, ".fla");
|
||
}
|
||
else if (saveType == 1) {
|
||
strcat(fileName, ".sra");
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
|
||
// create a new folder for the save file
|
||
EEPROM_readAnything(10, foldern);
|
||
sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
|
||
sd.mkdir(folder, true);
|
||
sd.chdir(folder);
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(10, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
|
||
// Set the address
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < bufferSize; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
myFile.write(sdBuffer, bufferSize);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
print_Msg(F("Saved to "));
|
||
print_Msg(folder);
|
||
println_Msg(F("/"));
|
||
display_Update();
|
||
}
|
||
|
||
unsigned long verifySram(unsigned long sramSize, byte flashramType) {
|
||
writeErrors = 0;
|
||
|
||
int offset = 512;
|
||
int bufferSize = 512;
|
||
if (flashramType == 2) {
|
||
offset = 64;
|
||
bufferSize = 128;
|
||
}
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
|
||
// Set the address
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < bufferSize; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
// Check sdBuffer content against file on sd card
|
||
for (int i = 0; i < bufferSize; i++) {
|
||
if (myFile.read() != sdBuffer[i]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
else {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
// Return 0 if verified ok, or number of errors
|
||
return writeErrors;
|
||
}
|
||
|
||
/******************************************
|
||
Flashram functions
|
||
*****************************************/
|
||
// Send a command to the flashram command register
|
||
void sendFramCmd (unsigned long myCommand) {
|
||
// Split command into two words
|
||
word myComLowOut = myCommand & 0xFFFF;
|
||
word myComHighOut = myCommand >> 16;
|
||
|
||
// Set address to command register
|
||
setAddress_N64(0x08010000);
|
||
// Send command
|
||
writeWord_N64(myComHighOut);
|
||
writeWord_N64(myComLowOut);
|
||
}
|
||
|
||
// Init fram
|
||
void initFram() {
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
delay(10);
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
delay(10);
|
||
//FRAM_STATUS_MODE_CMD
|
||
sendFramCmd(0xE1000000);
|
||
delay(10);
|
||
}
|
||
|
||
void writeFram(byte flashramType) {
|
||
if (saveType == 4) {
|
||
// Erase fram
|
||
eraseFram();
|
||
|
||
// Check if empty
|
||
if (blankcheck_N64(flashramType) == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
println_Msg("FAIL");
|
||
display_Update();
|
||
}
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
print_Msg(F("Writing "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
// Init fram
|
||
initFram();
|
||
|
||
// Write all 8 fram banks
|
||
print_Msg(F("Bank "));
|
||
for (byte bank = 0; bank < 8; bank++) {
|
||
print_Msg(bank);
|
||
print_Msg(F(" "));
|
||
display_Update();
|
||
|
||
// Write one bank of 128*128 bytes
|
||
for (byte offset = 0; offset < 128; offset++) {
|
||
// Read save from SD into buffer
|
||
myFile.read(sdBuffer, 128);
|
||
|
||
// FRAM_WRITE_MODE_CMD
|
||
sendFramCmd(0xB4000000);
|
||
delay(1);
|
||
|
||
// Set the address for the next 128 bytes
|
||
setAddress_N64(0x08000000);
|
||
|
||
// Send 128 bytes, 64 words
|
||
for (byte c = 0; c < 128; c += 2) {
|
||
// Join two bytes into one word
|
||
word myWord = ( ( sdBuffer[c] & 0xFF ) << 8 ) | ( sdBuffer[c + 1] & 0xFF );
|
||
// Write word
|
||
writeWord_N64(myWord);
|
||
}
|
||
// Delay between each "DMA"
|
||
delay(1);
|
||
|
||
//FRAM_WRITE_OFFSET_CMD + offset
|
||
sendFramCmd((0xA5000000 | (((bank * 128) + offset) & 0xFFFF)));
|
||
delay(1);
|
||
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
while (waitForFram(flashramType)) {
|
||
delay(1);
|
||
}
|
||
}
|
||
// Delay between banks
|
||
delay(20);
|
||
}
|
||
println_Msg("");
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
else {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
}
|
||
|
||
// Delete all 8 flashram banks
|
||
void eraseFram() {
|
||
if (saveType == 4) {
|
||
print_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
// Init fram
|
||
initFram();
|
||
|
||
// Erase fram
|
||
// 0x4B00007F 0x4B0000FF 0x4B00017F 0x4B0001FF 0x4B00027F 0x4B0002FF 0x4B00037F 0x4B0003FF
|
||
for (unsigned long bank = 0x4B00007F; bank < 0x4B00047F; bank += 0x80) {
|
||
sendFramCmd(bank);
|
||
delay(10);
|
||
// FRAM_ERASE_MODE_CMD
|
||
sendFramCmd(0x78000000);
|
||
delay(10);
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
while (waitForFram(flashramType)) {
|
||
delay(1);
|
||
}
|
||
}
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
}
|
||
|
||
// Read flashram
|
||
void readFram(byte flashramType) {
|
||
if (saveType == 4) {
|
||
// Put flashram into read mode
|
||
// FRAM_READ_MODE_CMD
|
||
sendFramCmd(0xF0000000);
|
||
// Read Flashram
|
||
readSram(131072, flashramType);
|
||
}
|
||
else {
|
||
print_Error(F("Savetype Error"), true);
|
||
}
|
||
}
|
||
|
||
// Verify flashram
|
||
unsigned long verifyFram(byte flashramType) {
|
||
// Put flashram into read mode
|
||
// FRAM_READ_MODE_CMD
|
||
sendFramCmd(0xF0000000);
|
||
writeErrors = verifySram(131072, flashramType);
|
||
return writeErrors;
|
||
}
|
||
|
||
// Blankcheck flashram
|
||
unsigned long blankcheck_N64(byte flashramType) {
|
||
writeErrors = 0;
|
||
|
||
int offset = 512;
|
||
int bufferSize = 512;
|
||
if (flashramType == 2) {
|
||
offset = 64;
|
||
bufferSize = 128;
|
||
}
|
||
|
||
// Put flashram into read mode
|
||
// FRAM_READ_MODE_CMD
|
||
sendFramCmd(0xF0000000);
|
||
|
||
// Read Flashram
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + (131072 / flashramType)); currByte += offset) {
|
||
// Set the address for the next 512 bytes
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < bufferSize; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
// Check sdBuffer content against file on sd card
|
||
for (int i = 0; i < bufferSize; i++) {
|
||
if (0xFF != sdBuffer[i]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
// Return 0 if verified ok, or number of errors
|
||
return writeErrors;
|
||
}
|
||
|
||
// Wait until current operation is done
|
||
byte waitForFram(byte flashramType) {
|
||
byte framStatus = 0;
|
||
byte statusMXL1100[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1E};
|
||
byte statusMXL1101[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1D};
|
||
byte statusMN63F81[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0x32, 0x00, 0xF1};
|
||
|
||
// FRAM_STATUS_MODE_CMD
|
||
sendFramCmd(0xE1000000);
|
||
delay(1);
|
||
|
||
// Set address to Fram status register
|
||
setAddress_N64(0x08000000);
|
||
|
||
// Read Status
|
||
for (byte c = 0; c < 8; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
|
||
if (flashramType == 2) {
|
||
for (byte c = 0; c < 8; c++) {
|
||
if (statusMXL1100[c] != sdBuffer[c]) {
|
||
framStatus = 1;
|
||
}
|
||
}
|
||
}
|
||
else if (flashramType == 1) {
|
||
//MX29L1101
|
||
if (MN63F81MPN == false) {
|
||
for (byte c = 0; c < 8; c++) {
|
||
if (statusMXL1101[c] != sdBuffer[c]) {
|
||
framStatus = 1;
|
||
}
|
||
}
|
||
}
|
||
//MN63F81MPN
|
||
else if (MN63F81MPN == true) {
|
||
for (byte c = 0; c < 8; c++) {
|
||
if (statusMN63F81[c] != sdBuffer[c]) {
|
||
framStatus = 1;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
return framStatus;
|
||
}
|
||
|
||
// Get flashram type
|
||
void getFramType() {
|
||
|
||
// FRAM_STATUS_MODE_CMD
|
||
sendFramCmd(0xE1000000);
|
||
delay(10);
|
||
|
||
// Set address to Fram status register
|
||
setAddress_N64(0x08000000);
|
||
|
||
// Read Status
|
||
for (byte c = 0; c < 8; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
//MX29L1100
|
||
if (sdBuffer[7] == 0x1e ) {
|
||
flashramType = 2;
|
||
println_Msg(F("Type: MX29L1100"));
|
||
display_Update();
|
||
}
|
||
//MX29L1101
|
||
else if (sdBuffer[7] == 0x1d ) {
|
||
flashramType = 1;
|
||
MN63F81MPN = false;
|
||
println_Msg(F("Type: MX29L1101"));
|
||
display_Update();
|
||
}
|
||
//MN63F81MPN
|
||
else if (sdBuffer[7] == 0xf1 ) {
|
||
flashramType = 1;
|
||
MN63F81MPN = true;
|
||
println_Msg(F("Type: MN63F81MPN"));
|
||
display_Update();
|
||
}
|
||
// 29L1100KC-15B0 compat MX29L1101
|
||
else if ((sdBuffer[7] == 0x8e ) || (sdBuffer[7] == 0x84 )) {
|
||
flashramType = 1;
|
||
MN63F81MPN = false;
|
||
println_Msg(F("Type: 29L1100KC-15B0"));
|
||
println_Msg(F("(compat. MX29L1101)"));
|
||
display_Update();
|
||
}
|
||
// Type unknown
|
||
else {
|
||
for (byte c = 0; c < 8; c++) {
|
||
print_Msg(sdBuffer[c], HEX);
|
||
print_Msg(F(", "));
|
||
}
|
||
print_Error(F("Flashram unknown"), true);
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
Rom functions
|
||
*****************************************/
|
||
// Read rom and save to the SD card
|
||
void readRom_N64() {
|
||
// Get name, add extension and convert to char array for sd lib
|
||
strcpy(fileName, romName);
|
||
strcat(fileName, ".Z64");
|
||
|
||
// create a new folder
|
||
EEPROM_readAnything(10, foldern);
|
||
sprintf(folder, "N64/ROM/%s/%d", romName, foldern);
|
||
sd.mkdir(folder, true);
|
||
sd.chdir(folder);
|
||
|
||
display_Clear();
|
||
print_Msg(F("Saving to "));
|
||
print_Msg(folder);
|
||
println_Msg(F("/..."));
|
||
display_Update();
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(10, foldern);
|
||
|
||
readn64rom:
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
|
||
byte buffer[1024] = { 0 };
|
||
|
||
// get current time
|
||
unsigned long startTime = millis();
|
||
|
||
//Initialize progress bar
|
||
uint32_t processedProgressBar = 0;
|
||
uint32_t totalProgressBar = (uint32_t)(cartSize) * 1024 * 1024;
|
||
draw_progressbar(0, totalProgressBar);
|
||
|
||
// prepare crc32
|
||
uint32_t oldcrc32 = 0xFFFFFFFF;
|
||
uint32_t tab_value = 0;
|
||
uint8_t idx = 0;
|
||
|
||
// run combined dumper + crc32 routine for better performance, as N64 ROMs are quite large for an 8bit micro
|
||
// currently dumps + checksums a 32MB cart in 170 seconds (down from 347 seconds)
|
||
for (unsigned long currByte = romBase; currByte < (romBase + (cartSize * 1024 * 1024)); currByte += 1024) {
|
||
// Blink led
|
||
if (currByte % 16384 == 0)
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Set the address for the first 512 bytes to dump
|
||
setAddress_N64(currByte);
|
||
// Wait 62.5ns (safety)
|
||
NOP;
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
// Pull read(PH6) low
|
||
PORTH &= ~(1 << 6);
|
||
// Wait ~310ns
|
||
NOP; NOP; NOP; NOP; NOP;
|
||
|
||
// data on PINK and PINF is valid now, read into sd card buffer
|
||
buffer[c] = PINK; // hiByte
|
||
buffer[c + 1] = PINF; // loByte
|
||
|
||
// Pull read(PH6) high
|
||
PORTH |= (1 << 6);
|
||
|
||
// crc32 update
|
||
idx = ((oldcrc32) ^ (buffer[c]));
|
||
tab_value = pgm_read_dword(crc_32_tab + idx);
|
||
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
|
||
idx = ((oldcrc32) ^ (buffer[c + 1]));
|
||
tab_value = pgm_read_dword(crc_32_tab + idx);
|
||
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
|
||
}
|
||
|
||
// Set the address for the next 512 bytes to dump
|
||
setAddress_N64(currByte + 512);
|
||
// Wait 62.5ns (safety)
|
||
NOP;
|
||
|
||
for (int c = 512; c < 1024; c += 2) {
|
||
// Pull read(PH6) low
|
||
PORTH &= ~(1 << 6);
|
||
// Wait ~310ns
|
||
NOP; NOP; NOP; NOP; NOP;
|
||
|
||
// data on PINK and PINF is valid now, read into sd card buffer
|
||
buffer[c] = PINK; // hiByte
|
||
buffer[c + 1] = PINF; // loByte
|
||
|
||
// Pull read(PH6) high
|
||
PORTH |= (1 << 6);
|
||
|
||
// crc32 update
|
||
idx = ((oldcrc32) ^ (buffer[c])) & 0xff;
|
||
tab_value = pgm_read_dword(crc_32_tab + idx);
|
||
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
|
||
idx = ((oldcrc32) ^ (buffer[c + 1])) & 0xff;
|
||
tab_value = pgm_read_dword(crc_32_tab + idx);
|
||
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
|
||
}
|
||
|
||
processedProgressBar += 1024;
|
||
draw_progressbar(processedProgressBar, totalProgressBar);
|
||
// write out 1024 bytes to file
|
||
myFile.write(buffer, 1024);
|
||
}
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
|
||
unsigned long timeElapsed = (millis() - startTime) / 1000; // seconds
|
||
|
||
print_Msg(F("CRC: "));
|
||
display_Update();
|
||
// convert checksum to string
|
||
char crcStr[9];
|
||
sprintf(crcStr, "%08lx", ~oldcrc32);
|
||
// Print checksum
|
||
println_Msg(crcStr);
|
||
display_Update();
|
||
|
||
// Search n64.txt for crc
|
||
if (searchCRC(crcStr)) {
|
||
// Dump was a known good rom
|
||
println_Msg(F("Checksum matches"));
|
||
}
|
||
else {
|
||
// Dump was bad or unknown
|
||
rgb.setColor(255, 0, 0);
|
||
|
||
// let bad crc show a short while
|
||
delay(3000);
|
||
|
||
// N64 CRC32 error Menu
|
||
unsigned char CRCMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(menuOptionsN64CRC, 3);
|
||
|
||
CRCMenu = question_box(F("CRC ERROR "), menuOptions, 3, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (CRCMenu)
|
||
{
|
||
case 0:
|
||
// Change to last directory
|
||
sd.chdir(folder);
|
||
// Delete old file
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
if (!myFile.remove()) {
|
||
print_Error(F("Delete Error"), true);
|
||
}
|
||
// Dump again
|
||
display_Clear();
|
||
println_Msg(F("Reading Rom..."));
|
||
display_Update();
|
||
rgb.setColor(0, 0, 0);
|
||
goto readn64rom;
|
||
break;
|
||
|
||
case 1:
|
||
// Return to N64 menu
|
||
break;
|
||
|
||
case 2:
|
||
// Reset
|
||
resetArduino();
|
||
break;
|
||
}
|
||
}
|
||
display_Update();
|
||
|
||
print_Msg(F("Done ("));
|
||
print_Msg(timeElapsed); // include elapsed time
|
||
println_Msg(F("s)"));
|
||
println_Msg(F(""));
|
||
println_Msg(F("Press Button..."));
|
||
display_Update();
|
||
wait();
|
||
}
|
||
|
||
/******************************************
|
||
N64 Repro Flashrom Functions
|
||
*****************************************/
|
||
void flashRepro_N64() {
|
||
// Check flashrom ID's
|
||
idFlashrom_N64();
|
||
|
||
// If the ID is known continue
|
||
if (cartSize != 0) {
|
||
// Print flashrom name
|
||
if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2201") == 0)) {
|
||
print_Msg(F("Spansion S29GL256N"));
|
||
if (cartSize == 64)
|
||
println_Msg(F(" x2"));
|
||
else
|
||
println_Msg("");
|
||
}
|
||
else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2101") == 0)) {
|
||
print_Msg(F("Spansion S29GL128N"));
|
||
}
|
||
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
|
||
print_Msg(F("Macronix MX29LV640"));
|
||
if (cartSize == 16)
|
||
println_Msg(F(" x2"));
|
||
else
|
||
println_Msg("");
|
||
}
|
||
else if (strcmp(flashid, "8816") == 0)
|
||
println_Msg(F("Intel 4400L0ZDQ0"));
|
||
else if (strcmp(flashid, "7E7E") == 0)
|
||
println_Msg(F("Fujitsu MSP55LV100S"));
|
||
else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2301") == 0))
|
||
println_Msg(F("Fujitsu MSP55LV512"));
|
||
else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "3901") == 0))
|
||
println_Msg(F("Intel 512M29EW"));
|
||
|
||
// Print info
|
||
print_Msg(F("ID: "));
|
||
print_Msg(flashid);
|
||
print_Msg(F(" Size: "));
|
||
print_Msg(cartSize);
|
||
println_Msg(F("MB"));
|
||
println_Msg("");
|
||
println_Msg(F("This will erase your"));
|
||
println_Msg(F("Repro Cartridge."));
|
||
println_Msg(F("Attention: Use 3.3V!"));
|
||
println_Msg("");
|
||
println_Msg(F("Press Button"));
|
||
display_Update();
|
||
wait();
|
||
|
||
// Launch file browser
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
fileBrowser(F("Select z64 file"));
|
||
display_Clear();
|
||
display_Update();
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
// Get rom size from file
|
||
fileSize = myFile.fileSize();
|
||
print_Msg(F("File size: "));
|
||
print_Msg(fileSize / 1048576);
|
||
println_Msg(F("MB"));
|
||
display_Update();
|
||
|
||
// Compare file size to flashrom size
|
||
if ((fileSize / 1048576) > cartSize) {
|
||
print_Error(F("File too big"), true);
|
||
}
|
||
|
||
// Erase needed sectors
|
||
if (strcmp(flashid, "227E") == 0) {
|
||
// Spansion S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
|
||
eraseFlashrom_N64(0x20000);
|
||
}
|
||
else if (strcmp(flashid, "7E7E") == 0) {
|
||
// Fujitsu MSP55LV100S
|
||
eraseMSP55LV100_N64();
|
||
}
|
||
else if ((strcmp(flashid, "8813") == 0) || (strcmp(flashid, "8816") == 0)) {
|
||
// Intel 4400L0ZDQ0
|
||
eraseIntel4400_N64();
|
||
resetIntel4400_N64();
|
||
}
|
||
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
|
||
// Macronix MX29LV640, C9 is top boot and CB is bottom boot block
|
||
eraseFlashrom_N64(0x8000);
|
||
}
|
||
|
||
// Check if erase was successful
|
||
if (blankcheckFlashrom_N64()) {
|
||
// Write flashrom
|
||
println_Msg(F("OK"));
|
||
print_Msg(F("Writing "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
|
||
if ((strcmp(cartID, "3901") == 0) && (strcmp(flashid, "227E") == 0)) {
|
||
// Intel 512M29EW(64MB) with 0x20000 sector size and 128 byte buffer
|
||
writeFlashBuffer_N64(0x20000, 128);
|
||
}
|
||
else if (strcmp(flashid, "227E") == 0) {
|
||
// Spansion S29GL128N/S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
|
||
writeFlashBuffer_N64(0x20000, 32);
|
||
}
|
||
else if (strcmp(flashid, "7E7E") == 0) {
|
||
//Fujitsu MSP55LV100S
|
||
writeMSP55LV100_N64(0x20000);
|
||
}
|
||
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
|
||
// Macronix MX29LV640 without buffer
|
||
writeFlashrom_N64();
|
||
}
|
||
else if ((strcmp(flashid, "8813") == 0) || (strcmp(flashid, "8816") == 0)) {
|
||
// Intel 4400L0ZDQ0
|
||
writeIntel4400_N64();
|
||
resetIntel4400_N64();
|
||
}
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
|
||
// Verify
|
||
print_Msg(F("Verifying..."));
|
||
display_Update();
|
||
writeErrors = verifyFlashrom_N64();
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Msg(writeErrors);
|
||
print_Msg(F(" bytes "));
|
||
print_Error(F("did not verify."), false);
|
||
}
|
||
}
|
||
else {
|
||
// Close the file
|
||
myFile.close();
|
||
print_Error(F("failed"), false);
|
||
}
|
||
}
|
||
else {
|
||
print_Error(F("Can't open file"), false);
|
||
}
|
||
}
|
||
// If the ID is unknown show error message
|
||
else {
|
||
print_Msg(F("Vendor: "));
|
||
println_Msg(vendorID);
|
||
print_Msg(F("ID: "));
|
||
print_Msg(flashid);
|
||
print_Msg(F(" "));
|
||
println_Msg(cartID);
|
||
print_Error(F("Unknown flashrom"), false);
|
||
}
|
||
|
||
println_Msg(F("Press Button..."));
|
||
display_Update();
|
||
wait();
|
||
display_Clear();
|
||
display_Update();
|
||
}
|
||
|
||
// Reset to read mode
|
||
void resetIntel4400_N64() {
|
||
for (unsigned long currPartition = 0; currPartition < (cartSize * 0x100000); currPartition += 0x20000) {
|
||
setAddress_N64(romBase + currPartition);
|
||
writeWord_N64(0xFF);
|
||
}
|
||
}
|
||
|
||
// Reset Fujitsu MSP55LV100S
|
||
void resetMSP55LV100_N64(unsigned long flashBase) {
|
||
// Send reset Command
|
||
setAddress_N64(flashBase);
|
||
writeWord_N64(0xF0F0);
|
||
delay(100);
|
||
}
|
||
|
||
// Common reset command
|
||
void resetFlashrom_N64(unsigned long flashBase) {
|
||
// Send reset Command
|
||
setAddress_N64(flashBase);
|
||
writeWord_N64(0xF0);
|
||
delay(100);
|
||
}
|
||
|
||
void idFlashrom_N64() {
|
||
// Set size to 0 if no ID is found
|
||
cartSize = 0;
|
||
|
||
// Send flashrom ID command
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
// Read 1 byte vendor ID
|
||
setAddress_N64(romBase);
|
||
sprintf(vendorID, "%02X", readWord_N64());
|
||
// Read 2 bytes flashrom ID
|
||
sprintf(flashid, "%04X", readWord_N64());
|
||
// Read 2 bytes secondary flashrom ID
|
||
setAddress_N64(romBase + 0x1C);
|
||
sprintf(cartID, "%04X", ((readWord_N64() << 8) | (readWord_N64() & 0xFF)));
|
||
|
||
// Spansion S29GL256N(32MB/64MB) with either one or two flashrom chips
|
||
if ((strcmp(cartID, "2201") == 0) && (strcmp(flashid, "227E") == 0)) {
|
||
cartSize = 32;
|
||
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
|
||
// Test for second flashrom chip at 0x2000000 (32MB)
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
char tempID[5];
|
||
setAddress_N64(romBase + 0x2000000);
|
||
// Read manufacturer ID
|
||
readWord_N64();
|
||
// Read flashrom ID
|
||
sprintf(tempID, "%04X", readWord_N64());
|
||
|
||
// Check if second flashrom chip is present
|
||
if (strcmp(tempID, "227E") == 0) {
|
||
cartSize = 64;
|
||
}
|
||
resetFlashrom_N64(romBase + 0x2000000);
|
||
}
|
||
|
||
// Macronix MX29LV640(8MB/16MB) with either one or two flashrom chips
|
||
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
|
||
cartSize = 8;
|
||
|
||
resetFlashrom_N64(romBase + 0x800000);
|
||
|
||
// Test for second flashrom chip at 0x800000 (8MB)
|
||
setAddress_N64(romBase + 0x800000 + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + 0x800000 + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + 0x800000 + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
char tempID[5];
|
||
setAddress_N64(romBase + 0x800000);
|
||
// Read manufacturer ID
|
||
readWord_N64();
|
||
// Read flashrom ID
|
||
sprintf(tempID, "%04X", readWord_N64());
|
||
|
||
// Check if second flashrom chip is present
|
||
if ((strcmp(tempID, "22C9") == 0) || (strcmp(tempID, "22CB") == 0)) {
|
||
cartSize = 16;
|
||
}
|
||
resetFlashrom_N64(romBase + 0x800000);
|
||
}
|
||
|
||
// Intel 4400L0ZDQ0 (64MB)
|
||
else if (strcmp(flashid, "8816") == 0) {
|
||
// Found first flashrom chip, set to 32MB
|
||
cartSize = 32;
|
||
resetIntel4400_N64();
|
||
|
||
// Test if second half of the flashrom might be hidden
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
// Read manufacturer ID
|
||
setAddress_N64(romBase + 0x2000000);
|
||
readWord_N64();
|
||
// Read flashrom ID
|
||
sprintf(cartID, "%04X", readWord_N64());
|
||
if (strcmp(cartID, "8813") == 0) {
|
||
cartSize = 64;
|
||
strncpy(flashid , cartID, 5);
|
||
}
|
||
resetIntel4400_N64();
|
||
// Empty cartID string
|
||
cartID[0] = '\0';
|
||
}
|
||
|
||
//Fujitsu MSP55LV512/Spansion S29GL512N (64MB)
|
||
else if ((strcmp(cartID, "2301") == 0) && (strcmp(flashid, "227E") == 0)) {
|
||
cartSize = 64;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
// Spansion S29GL128N(16MB) with one flashrom chip
|
||
else if ((strcmp(cartID, "2101") == 0) && (strcmp(flashid, "227E") == 0)) {
|
||
cartSize = 16;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
// Intel 512M29EW(64MB) with one flashrom chip
|
||
else if ((strcmp(cartID, "3901") == 0) && (strcmp(flashid, "227E") == 0)) {
|
||
cartSize = 64;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
// Unknown 227E type
|
||
else if (strcmp(flashid, "227E") == 0) {
|
||
cartSize = 0;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
//Test for Fujitsu MSP55LV100S (64MB)
|
||
else {
|
||
// Send flashrom ID command
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0x9090);
|
||
|
||
setAddress_N64(romBase);
|
||
// Read 1 byte vendor ID
|
||
readWord_N64();
|
||
// Read 2 bytes flashrom ID
|
||
sprintf(cartID, "%04X", readWord_N64());
|
||
|
||
if (strcmp(cartID, "7E7E") == 0) {
|
||
resetMSP55LV100_N64(romBase);
|
||
cartSize = 64;
|
||
strncpy(flashid , cartID, 5);
|
||
}
|
||
}
|
||
}
|
||
|
||
// Erase Intel flashrom
|
||
void eraseIntel4400_N64() {
|
||
unsigned long flashBase = romBase;
|
||
|
||
print_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
// If the game is smaller than 32Mbit only erase the needed blocks
|
||
unsigned long lastBlock = 0x1FFFFFF;
|
||
if (fileSize < 0x1FFFFFF)
|
||
lastBlock = fileSize;
|
||
|
||
// Erase 4 blocks with 16kwords each
|
||
for (unsigned long currBlock = 0x0; currBlock < 0x1FFFF; currBlock += 0x8000) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
|
||
// Erase up to 255 blocks with 64kwords each
|
||
for (unsigned long currBlock = 0x20000; currBlock < lastBlock; currBlock += 0x1FFFF) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
}
|
||
|
||
// Check if we should erase the second chip too
|
||
if ((cartSize = 64) && (fileSize > 0x2000000)) {
|
||
// Switch base address to second chip
|
||
flashBase = romBase + 0x2000000;
|
||
|
||
// 255 blocks with 64kwords each
|
||
for (unsigned long currBlock = 0x0; currBlock < 0x1FDFFFF; currBlock += 0x1FFFF) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
}
|
||
|
||
// 4 blocks with 16kword each
|
||
for (unsigned long currBlock = 0x1FE0000; currBlock < 0x1FFFFFF; currBlock += 0x8000) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
// Erase Fujutsu MSP55LV100S
|
||
void eraseMSP55LV100_N64() {
|
||
unsigned long flashBase = romBase;
|
||
unsigned long sectorSize = 0x20000;
|
||
|
||
print_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Send Erase Command to first chip
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0x8080);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + currSector);
|
||
writeWord_N64(0x3030);
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
while ((statusReg | 0x7FFF) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
|
||
// Common sector erase command
|
||
void eraseFlashrom_N64(unsigned long sectorSize) {
|
||
unsigned long flashBase = romBase;
|
||
|
||
print_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Spansion S29GL256N(32MB/64MB) with two flashrom chips
|
||
if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0) && (strcmp(flashid, "227E") == 0)) {
|
||
// Change to second chip
|
||
flashBase = romBase + 0x2000000;
|
||
}
|
||
// Macronix MX29LV640(8MB/16MB) with two flashrom chips
|
||
else if ((currSector == 0x800000) && ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0))) {
|
||
flashBase = romBase + 0x800000;
|
||
}
|
||
|
||
// Send Erase Command
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0x80);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + currSector);
|
||
writeWord_N64(0x30);
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
|
||
boolean blankcheckFlashrom_N64() {
|
||
for (unsigned long currByte = romBase; currByte < romBase + fileSize; currByte += 512) {
|
||
// Blink led
|
||
if (currByte % 131072 == 0)
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Set the address
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
if (readWord_N64() != 0xFFFF) {
|
||
return 0;
|
||
}
|
||
}
|
||
}
|
||
return 1;
|
||
}
|
||
|
||
// Write Intel flashrom
|
||
void writeIntel4400_N64() {
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Write 32 words at a time
|
||
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 64) {
|
||
// Buffered program command
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0xE8);
|
||
|
||
// Check Status register
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Write word count (minus 1)
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x1F);
|
||
|
||
// Write buffer
|
||
for (byte currByte = 0; currByte < 64; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
}
|
||
|
||
// Write Buffer to Flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register at last written address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
|
||
statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
// Write Fujitsu MSP55LV100S flashrom consisting out of two MSP55LV512 flashroms one used for the high byte the other for the low byte
|
||
void writeMSP55LV100_N64(unsigned long sectorSize) {
|
||
unsigned long flashBase = romBase;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Write 32 bytes at a time
|
||
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 32) {
|
||
|
||
// 2 unlock commands
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
|
||
// Write buffer load command at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x2525);
|
||
// Write word count (minus 1) at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x0F0F);
|
||
|
||
// Define variable before loop so we can use it later when reading the status register
|
||
word currWord;
|
||
|
||
for (byte currByte = 0; currByte < 32; currByte += 2) {
|
||
// Join two bytes into one word
|
||
currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );
|
||
|
||
// Load Buffer Words
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
}
|
||
|
||
// Write Buffer to Flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
|
||
writeWord_N64(0x2929);
|
||
|
||
// Read the status register at last written address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0x7F7F) != (currWord | 0x7F7F)) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
// Write Spansion S29GL256N flashrom using the 32 byte write buffer
|
||
void writeFlashBuffer_N64(unsigned long sectorSize, byte bufferSize) {
|
||
unsigned long flashBase = romBase;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Spansion S29GL256N(32MB/64MB) with two flashrom chips
|
||
if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0)) {
|
||
flashBase = romBase + 0x2000000;
|
||
}
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Write 32 bytes at a time
|
||
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += bufferSize) {
|
||
|
||
// 2 unlock commands
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
|
||
// Write buffer load command at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x25);
|
||
// Write word count (minus 1) at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64((bufferSize / 2) - 1);
|
||
|
||
// Define variable before loop so we can use it later when reading the status register
|
||
word currWord;
|
||
|
||
for (byte currByte = 0; currByte < bufferSize; currByte += 2) {
|
||
// Join two bytes into one word
|
||
currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );
|
||
|
||
// Load Buffer Words
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
}
|
||
|
||
// Write Buffer to Flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
|
||
writeWord_N64(0x29);
|
||
|
||
// Read the status register at last written address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
// Write MX29LV640 flashrom without write buffer
|
||
void writeFlashrom_N64() {
|
||
unsigned long flashBase = romBase;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += 0x8000) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Macronix MX29LV640(8MB/16MB) with two flashrom chips
|
||
if (currSector == 0x800000) {
|
||
flashBase = romBase + 0x800000;
|
||
}
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < 0x8000; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
for (int currByte = 0; currByte < 512; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
|
||
// 2 unlock commands
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
// Program command
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xA0);
|
||
// Write word
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
unsigned long verifyFlashrom_N64() {
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
writeErrors = 0;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
for (int currByte = 0; currByte < 512; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
|
||
// Read flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
// Compare both
|
||
if (readWord_N64() != currWord) {
|
||
writeErrors++;
|
||
// Abord if too many errors
|
||
if (writeErrors > 20) {
|
||
print_Msg(F("More than "));
|
||
// Close the file:
|
||
myFile.close();
|
||
return writeErrors;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
return writeErrors;
|
||
}
|
||
else {
|
||
println_Msg(F("Can't open file"));
|
||
display_Update();
|
||
return 9999;
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
N64 Gameshark Flash Functions
|
||
*****************************************/
|
||
void flashGameshark_N64() {
|
||
// Check flashrom ID's
|
||
idGameshark_N64();
|
||
|
||
// Check for SST 29LE010
|
||
if (strcmp(flashid, "0808") == 0) {
|
||
backupGameshark_N64();
|
||
println_Msg("");
|
||
println_Msg(F("This will erase your"));
|
||
println_Msg(F("Gameshark cartridge"));
|
||
println_Msg(F("Attention: Use 3.3V!"));
|
||
println_Msg("");
|
||
println_Msg(F("Press Button"));
|
||
display_Update();
|
||
wait();
|
||
|
||
// Launch file browser
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
fileBrowser(F("Select z64 file"));
|
||
display_Clear();
|
||
display_Update();
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
// Get rom size from file
|
||
fileSize = myFile.fileSize();
|
||
print_Msg(F("File size: "));
|
||
print_Msg(fileSize / 1024);
|
||
println_Msg(F("KB"));
|
||
display_Update();
|
||
|
||
// Compare file size to flashrom size
|
||
if (fileSize > 262144) {
|
||
print_Error(F("File too big"), true);
|
||
}
|
||
|
||
// SST 29LE010, chip erase not needed as this eeprom automaticly erases during the write cycle
|
||
eraseGameshark_N64();
|
||
|
||
// Write flashrom
|
||
print_Msg(F("Writing "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
writeGameshark_N64();
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
|
||
// Verify
|
||
print_Msg(F("Verifying..."));
|
||
display_Update();
|
||
writeErrors = verifyGameshark_N64();
|
||
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
}
|
||
else {
|
||
print_Msg(writeErrors);
|
||
print_Msg(F(" bytes "));
|
||
print_Error(F("did not verify."), false);
|
||
}
|
||
}
|
||
else {
|
||
print_Error(F("Can't open file"), false);
|
||
}
|
||
}
|
||
// If the ID is unknown show error message
|
||
else {
|
||
print_Msg(F("ID: "));
|
||
println_Msg(flashid);
|
||
print_Error(F("Unknown flashrom"), false);
|
||
}
|
||
|
||
println_Msg(F("Press Button..."));
|
||
display_Update();
|
||
wait();
|
||
display_Clear();
|
||
display_Update();
|
||
}
|
||
|
||
|
||
//Test for SST 29LE010
|
||
void idGameshark_N64() {
|
||
//Send flashrom ID command
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0x9090);
|
||
|
||
setAddress_N64(romBase);
|
||
// Read 1 byte vendor ID
|
||
readWord_N64();
|
||
// Read 2 bytes flashrom ID
|
||
sprintf(flashid, "%04X", readWord_N64());
|
||
// Reset flashrom
|
||
resetGameshark_N64();
|
||
}
|
||
|
||
//Reset ST29LE010
|
||
void resetGameshark_N64() {
|
||
// Send reset Command
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xF0F0);
|
||
delay(100);
|
||
}
|
||
|
||
// Read rom and save to the SD card
|
||
void backupGameshark_N64() {
|
||
// create a new folder
|
||
EEPROM_readAnything(10, foldern);
|
||
sprintf(fileName, "GS%d", foldern);
|
||
strcat(fileName, ".z64");
|
||
sd.mkdir("N64/ROM/Gameshark", true);
|
||
sd.chdir("N64/ROM/Gameshark");
|
||
|
||
display_Clear();
|
||
print_Msg(F("Saving "));
|
||
print_Msg(fileName);
|
||
println_Msg(F("..."));
|
||
display_Update();
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(10, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_Error(F("SD Error"), true);
|
||
}
|
||
|
||
for (unsigned long currByte = romBase + 0xC00000; currByte < (romBase + 0xC00000 + 262144); currByte += 512) {
|
||
// Blink led
|
||
if (currByte % 16384 == 0)
|
||
PORTB ^= (1 << 4);
|
||
|
||
// Set the address for the next 512 bytes
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
myFile.write(sdBuffer, 512);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
|
||
// Send chip erase to the two SST29LE010 inside the Gameshark
|
||
void eraseGameshark_N64() {
|
||
println_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
//Sending erase command according to datasheet
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0x8080);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0x1010);
|
||
|
||
delay(20);
|
||
}
|
||
|
||
// Write Gameshark with 2x SST29LE010 Eeproms
|
||
void writeGameshark_N64() {
|
||
// Each 29LE010 has 1024 pages, each 128 bytes in size
|
||
for (unsigned long currPage = 0; currPage < fileSize / 2; currPage += 128) {
|
||
// Fill SD buffer with twice the amount since we flash 2 chips
|
||
myFile.read(sdBuffer, 256);
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
|
||
//Send page write command to both flashroms
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xA0A0);
|
||
|
||
// Write 1 page each, one flashrom gets the low byte, the other the high byte.
|
||
for (unsigned long currByte = 0; currByte < 256; currByte += 2) {
|
||
// Set address
|
||
setAddress_N64(romBase + 0xC00000 + (currPage * 2) + currByte);
|
||
// Join two bytes into one word
|
||
word currWord = ((sdBuffer[currByte] & 0xFF) << 8) | (sdBuffer[currByte + 1] & 0xFF);
|
||
// Send byte data
|
||
writeWord_N64(currWord);
|
||
}
|
||
delay(30);
|
||
}
|
||
}
|
||
|
||
unsigned long verifyGameshark_N64() {
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
writeErrors = 0;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
|
||
// Blink led
|
||
PORTB ^= (1 << 4);
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
for (int currByte = 0; currByte < 512; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
|
||
// Read flash
|
||
setAddress_N64(romBase + 0xC00000 + currSector + currSdBuffer + currByte);
|
||
// Compare both
|
||
if (readWord_N64() != currWord) {
|
||
if ( (strcmp(flashid, "0808") == 0) && (currSector + currSdBuffer + currByte > 0x3F) && (currSector + currSdBuffer + currByte < 0x1080)) {
|
||
// Gameshark maps this area to the bootcode of the plugged in cartridge
|
||
}
|
||
else {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
return writeErrors;
|
||
}
|
||
else {
|
||
println_Msg(F("Can't open file"));
|
||
display_Update();
|
||
return 9999;
|
||
}
|
||
}
|
||
|
||
//******************************************
|
||
// End of File
|
||
//******************************************
|