cartreader/extras/3dprint
2018-05-05 20:19:32 +02:00
..
backplate_tabs.stl Add files via upload 2018-04-13 16:54:42 +02:00
combined_no_tabs.stl Add files via upload 2018-05-05 20:19:32 +02:00
n64sleeve.stl Add files via upload 2018-04-13 16:54:42 +02:00
README.md Update README.md 2018-05-05 20:19:12 +02:00
sd_spacer.stl Add files via upload 2018-04-13 16:54:42 +02:00
sidewall_tabs.stl Add files via upload 2018-04-13 16:54:42 +02:00
snes_spacer.stl Add files via upload 2018-04-13 16:54:42 +02:00

Combined STL file with all parts

image

Separate STL files for each part

snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot

image

n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough

image

backplate_tabs.stl is the backplate that holds the Arduino

image

sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb

image

sidewall_tabs.stl secures the Arduino Mega to the backplate with five M2x8 screws

image