mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-27 05:21:53 +01:00
| .. | ||
| backplate_battery.stl | ||
| backplate_simple.stl | ||
| backplate_tabs.stl | ||
| case_bottom.stl | ||
| case_button_3mm.stl | ||
| case_top.stl | ||
| combined_no_tabs.stl | ||
| microsd_spacer.stl | ||
| n64sleeve.stl | ||
| README.md | ||
| sd_spacer.stl | ||
| sidewall_battery.stl | ||
| sidewall_tabs.stl | ||
| snes_spacer.stl | ||
Combined STL file with all parts
Separate STL files for each part
snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot
n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough
backplate_tabs.stl is the backplate that holds the Arduino
sd_spacer.stl or microsd_spacer hold the RGB led and fit between the SD card and the Cart Reader pcb (print with clear PLA/ABS)
sidewall_tabs.stl secures the Arduino Mega to the backplate with five M2x8 screws
case_xxx.stl are a replacement for the more simple backplate in case you prefer a full enclosure
The rest of the STL files are alternative designs in case you use the battery add-on.
Print settings for Slic3r Prusa Edition
Select the "0.20mm NORMAL" setting that comes with Slic3r and change the following parameters:
ensure_vertical_shell_thickness = 0
fill_density = 5%
first_layer_height = 0.3
perimeters = 1
thin_walls = 1