cartreader/extras/3dprint
2019-08-24 19:22:56 +02:00
..
backplate_battery.stl Add files via upload 2018-08-16 18:21:04 +02:00
backplate_simple.stl Add files via upload 2019-08-17 19:06:50 +02:00
backplate_tabs.stl Add files via upload 2018-04-13 16:54:42 +02:00
case_bottom.stl Add files via upload 2019-08-08 12:00:39 +02:00
case_button_3mm.stl Rename case_button.stl to case_button_3mm.stl 2019-08-24 19:22:56 +02:00
case_top.stl Add case 2019-08-05 16:42:24 +02:00
combined_no_tabs.stl Add files via upload 2018-05-05 20:19:32 +02:00
microsd_spacer.stl Add case 2019-08-05 16:42:24 +02:00
n64sleeve.stl Add case 2019-08-05 16:42:24 +02:00
README.md Update README.md 2019-08-06 12:51:30 +02:00
sd_spacer.stl Add files via upload 2018-09-28 09:40:08 +02:00
sidewall_battery.stl Add files via upload 2018-08-16 18:21:04 +02:00
sidewall_tabs.stl Add files via upload 2018-04-13 16:54:42 +02:00
snes_spacer.stl Add files via upload 2018-04-13 16:54:42 +02:00

Combined STL file with all parts

image

Separate STL files for each part

snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot

image

n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough

image

backplate_tabs.stl is the backplate that holds the Arduino

image

sd_spacer.stl or microsd_spacer hold the RGB led and fit between the SD card and the Cart Reader pcb (print with clear PLA/ABS)

image

sidewall_tabs.stl secures the Arduino Mega to the backplate with five M2x8 screws

image

case_xxx.stl are a replacement for the more simple backplate in case you prefer a full enclosure

image

The rest of the STL files are alternative designs in case you use the battery add-on.

Print settings for Slic3r Prusa Edition

Select the "0.20mm NORMAL" setting that comes with Slic3r and change the following parameters:
ensure_vertical_shell_thickness = 0
fill_density = 5%
first_layer_height = 0.3
perimeters = 1
thin_walls = 1