Mirrors/cartreader
2
0
Fork 0
mirror of https://github.com/sanni/cartreader.git synced 2024-11-30 16:34:14 +01:00
Code Issues Projects Releases Wiki Activity
69d3f8067b
cartreader/Cart_Reader/FLASH.ino
sanni 5ff1705faa
Update FLASH.ino
2019-09-22 08:32:58 +02:00

2104 lines
54 KiB
C++
Raw Blame History

//******************************************
// FLASHROM MODULE
//******************************************
/******************************************
Variables
*****************************************/
// Flashrom
unsigned long flashSize;
byte flashromType;
byte secondID = 1;
unsigned long time;
unsigned long blank;
unsigned long sectorSize;
byte bufferSize;
boolean hiROM = 1;
/******************************************
Menu
*****************************************/
// Flash start menu
static const char flashMenuItem1[] PROGMEM = "8bit Flash adapter";
static const char flashMenuItem2[] PROGMEM = "Eprom adapter";
static const char flashMenuItem3[] PROGMEM = "MX26L6420 adapter";
static const char* const menuOptionsFlash[] PROGMEM = {flashMenuItem1, flashMenuItem2, flashMenuItem3};
// 8bit Flash menu items
static const char flash8MenuItem1[] PROGMEM = "Blankcheck";
static const char flash8MenuItem2[] PROGMEM = "Erase";
static const char flash8MenuItem3[] PROGMEM = "Read";
static const char flash8MenuItem4[] PROGMEM = "Write";
static const char flash8MenuItem5[] PROGMEM = "ID";
static const char flash8MenuItem6[] PROGMEM = "Print";
static const char flash8MenuItem7[] PROGMEM = "Reset";
static const char* const menuOptionsFLASH8[] PROGMEM = {flash8MenuItem1, flash8MenuItem2, flash8MenuItem3, flash8MenuItem4, flash8MenuItem5, flash8MenuItem6, flash8MenuItem7};
// 16bit Flash menu items
static const char flash16MenuItem1[] PROGMEM = "Blankcheck";
static const char flash16MenuItem2[] PROGMEM = "Erase";
static const char flash16MenuItem3[] PROGMEM = "Read";
static const char flash16MenuItem4[] PROGMEM = "Write";
static const char flash16MenuItem5[] PROGMEM = "ID";
static const char flash16MenuItem6[] PROGMEM = "Print";
static const char flash16MenuItem7[] PROGMEM = "Reset";
static const char* const menuOptionsFLASH16[] PROGMEM = {flash16MenuItem1, flash16MenuItem2, flash16MenuItem3, flash16MenuItem4, flash16MenuItem5, flash16MenuItem6, flash16MenuItem7};
// Eprom menu items
static const char epromMenuItem1[] PROGMEM = "Blankcheck";
static const char epromMenuItem2[] PROGMEM = "Read";
static const char epromMenuItem3[] PROGMEM = "Write";
static const char epromMenuItem4[] PROGMEM = "Verify";
static const char epromMenuItem5[] PROGMEM = "Print";
static const char epromMenuItem6[] PROGMEM = "Reset";
static const char* const menuOptionsEprom[] PROGMEM = {epromMenuItem1, epromMenuItem2, epromMenuItem3, epromMenuItem4, epromMenuItem5, epromMenuItem6};
void flashMenu() {
// create menu with title and 3 options to choose from
unsigned char flashSlot;
// Copy menuOptions out of progmem
convertPgm(menuOptionsFlash, 3);
flashSlot = question_box(F("Select adapter PCB"), menuOptions, 3, 0);
// wait for user choice to come back from the question box menu
switch (flashSlot)
{
case 0:
display_Clear();
display_Update();
hiROM = 1;
setup_Flash8();
id_Flash8();
wait();
mode = mode_FLASH8;
break;
case 1:
display_Clear();
display_Update();
setup_Eprom();
mode = mode_EPROM;
break;
case 2:
display_Clear();
display_Update();
setup_Flash16();
id_Flash16();
wait();
mode = mode_FLASH16;
break;
}
}
void flashromMenu8() {
// create menu with title and 7 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsFLASH8, 7);
mainMenu = question_box(F("Flashrom Writer 8"), menuOptions, 7, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu)
{
case 0:
display_Clear();
println_Msg(F("Blankcheck"));
display_Update();
time = millis();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
blankcheck_Flash();
break;
case 1:
display_Clear();
println_Msg(F("Erasing Flashrom"));
println_Msg(F("Please wait..."));
display_Update();
time = millis();
if (flashromType == 1) {
eraseFlash29F032();
}
else {
eraseFlash29F1610();
}
println_Msg(F("Flashrom erased"));
display_Update();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
break;
case 2:
time = millis();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
readFlash();
break;
case 3:
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Select file"));
display_Clear();
time = millis();
if (flashromType == 1)
writeFlash29F032();
else if (flashromType == 2) {
if (strcmp(flashid, "C2F3") == 0)
writeFlash29F1601();
else if ((strcmp(flashid, "C2F1") == 0) || (strcmp(flashid, "C2F9") == 0))
writeFlash29F1610();
else if ((strcmp(flashid, "C2C4") == 0) || (strcmp(flashid, "C249") == 0) || (strcmp(flashid, "C2A7") == 0) || (strcmp(flashid, "C2A8") == 0) || (strcmp(flashid, "C2C9") == 0) || (strcmp(flashid, "C2CB") == 0))
writeFlash29LV640();
else if (strcmp(flashid, "017E") == 0) {
// sector size, write buffer size
writeFlash29GL(sectorSize, bufferSize);
}
}
delay(100);
// Reset twice just to be sure
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
verifyFlash();
break;
case 4:
time = 0;
display_Clear();
println_Msg(F("ID Flashrom"));
if (flashromType == 1)
idFlash29F032();
else
idFlash29F1610();
println_Msg(F(""));
printFlash(40);
println_Msg(F(""));
display_Update();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
break;
case 5:
time = 0;
display_Clear();
println_Msg(F("Print first 70Bytes"));
display_Update();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
printFlash(70);
break;
case 6:
time = 0;
display_Clear();
display_Update();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
resetArduino();
break;
}
if (time != 0) {
print_Msg(F("Operation took : "));
print_Msg((millis() - time) / 1000, DEC);
println_Msg(F("s"));
display_Update();
}
print_Msg(F("Press Button..."));
display_Update();
wait();
}
void flashromMenu16() {
// create menu with title "Flashrom Writer 16" and 7 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsFLASH16, 7);
mainMenu = question_box(F("Flashrom Writer 16"), menuOptions, 7, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu)
{
case 0:
display_Clear();
println_Msg(F("Blankcheck"));
display_Update();
time = millis();
resetFlash16();
blankcheck16();
break;
case 1:
display_Clear();
println_Msg(F("Erase Flashrom"));
display_Update();
time = millis();
resetFlash16();
eraseFlash16();
println_Msg(F("Flashrom erased."));
display_Update();
break;
case 2:
display_Clear();
time = millis();
resetFlash16();
readFlash16();
break;
case 3:
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Select file"));
display_Clear();
time = millis();
if (strcmp(flashid, "C2F3") == 0) {
writeFlash16_29F1601();
}
else if ((strcmp(flashid, "C2C4") == 0) || (strcmp(flashid, "C249") == 0) || (strcmp(flashid, "C2A7") == 0) || (strcmp(flashid, "C2A8") == 0) || (strcmp(flashid, "C2C9") == 0) || (strcmp(flashid, "C2CB") == 0) || (strcmp(flashid, "C2FC") == 0)) {
writeFlash16_29LV640();
}
else {
writeFlash16();
}
delay(100);
resetFlash16();
delay(100);
verifyFlash16();
break;
case 4:
time = 0;
display_Clear();
println_Msg(F("ID Flashrom"));
idFlash16();
println_Msg(F(""));
printFlash16(40);
println_Msg(F(""));
display_Update();
resetFlash16();
break;
case 5:
time = 0;
display_Clear();
println_Msg(F("Print first 70Bytes"));
display_Update();
resetFlash16();
printFlash16(70);
break;
case 6:
time = 0;
display_Clear();
display_Update();
resetFlash16();
resetArduino();
break;
}
if (time != 0) {
print_Msg(F("Operation took: "));
print_Msg((millis() - time) / 1000, DEC);
println_Msg("s");
display_Update();
}
wait();
}
void epromMenu() {
// create menu with title "Eprom Writer" and 4 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsEprom, 6);
mainMenu = question_box(F("Eprom Writer"), menuOptions, 6, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu)
{
case 0:
display_Clear();
println_Msg(F("Blankcheck"));
display_Update();
time = millis();
blankcheck_Eprom();
break;
case 1:
display_Clear();
time = millis();
read_Eprom();
break;
case 2:
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Select file"));
display_Clear();
time = millis();
write_Eprom();
delay(1000);
verify_Eprom();
break;
case 3:
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Verify against"));
sprintf(filePath, "%s/%s", filePath, fileName);
display_Clear();
time = millis();
verify_Eprom();
break;
case 4:
display_Clear();
time = millis();
print_Eprom(80);
break;
case 5:
time = 0;
display_Clear();
display_Update();
resetArduino();
break;
}
if (time != 0) {
print_Msg(F("Operation took: "));
print_Msg((millis() - time) / 1000, DEC);
println_Msg("s");
display_Update();
}
wait();
}
/******************************************
Flash IDs
*****************************************/
void id_Flash8() {
// ID flash
idFlash29F032();
// Print start screen
idtheflash:
display_Clear();
display_Update();
println_Msg(F("Flashrom Writer 8bit"));
println_Msg(" ");
println_Msg(" ");
print_Msg(F("Flash ID: "));
println_Msg(flashid);
if (strcmp(flashid, "C2F1") == 0) {
println_Msg(F("MX29F1610 detected"));
flashSize = 2097152;
flashromType = 2;
}
else if (strcmp(flashid, "C2F3") == 0) {
println_Msg(F("MX29F1601 detected"));
flashSize = 2097152;
flashromType = 2;
}
else if (strcmp(flashid, "C2F9") == 0) {
println_Msg(F("MX29L3211 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 4194304;
flashromType = 2;
}
else if ((strcmp(flashid, "C2C4") == 0) || (strcmp(flashid, "C249") == 0)) {
println_Msg(F("MX29LV160 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 2097152;
flashromType = 2;
}
else if ((strcmp(flashid, "C2A7") == 0) || (strcmp(flashid, "C2A8") == 0)) {
println_Msg(F("MX29LV320 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 4194304;
flashromType = 2;
}
else if ((strcmp(flashid, "C2C9") == 0) || (strcmp(flashid, "C2CB") == 0)) {
println_Msg(F("MX29LV640 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 8388608;
flashromType = 2;
}
else if (strcmp(flashid, "0141") == 0) {
println_Msg(F("AM29F032B detected"));
flashSize = 4194304;
flashromType = 1;
}
else if (strcmp(flashid, "01AD") == 0) {
println_Msg(F("AM29F016B detected"));
flashSize = 2097152;
flashromType = 1;
}
else if (strcmp(flashid, "20AD") == 0) {
println_Msg(F("AM29F016D detected"));
flashSize = 2097152;
flashromType = 1;
}
else if (strcmp(flashid, "04AD") == 0) {
println_Msg(F("AM29F016D detected"));
flashSize = 2097152;
flashromType = 1;
}
else if (strcmp(flashid, "04D4") == 0) {
println_Msg(F("MBM29F033C detected"));
flashSize = 4194304;
flashromType = 1;
}
else if (strcmp(flashid, "017E") == 0) {
// S29GL032M
if (readByte_Flash(28) == 0x1A) {
println_Msg(F("S29GL032M detected"));
flashSize = 4194304;
sectorSize = 65536;
bufferSize = 32;
}
// Unknown S29GL type
else {
println_Msg(F("Unknown S29GL Type"));
flashSize = 4194304;
sectorSize = 65536;
bufferSize = 32;
}
println_Msg(F("ATTENTION 3.3V"));
flashromType = 2;
}
else if (secondID) {
// Backup first ID read-out
strncpy(vendorID, flashid, 5);
// Read ID a second time using a different command
idFlash29F1610();
secondID = 0;
goto idtheflash;
}
else {
// ID not found
display_Clear();
println_Msg(F("Flashrom Writer 8bit"));
println_Msg(" ");
print_Msg(F("ID Type 1: "));
println_Msg(vendorID);
print_Msg(F("ID Type 2: "));
println_Msg(flashid);
println_Msg(" ");
print_Error(F("UNKNOWN FLASHROM"), true);
}
println_Msg(" ");
println_Msg(F("Press Button..."));
display_Update();
if (flashromType == 1)
resetFlash29F032();
else
resetFlash29F1610();
}
void id_Flash16() {
// ID flash
idFlash16();
resetFlash16();
println_Msg(F("Flashrom Writer 16bit"));
println_Msg(" ");
print_Msg(F("Flash ID: "));
println_Msg(flashid);
if (strcmp(flashid, "C2F1") == 0) {
println_Msg(F("MX29F1610 detected"));
println_Msg(" ");
flashSize = 2097152;
flashromType = 2;
}
else if (strcmp(flashid, "C2F3") == 0) {
println_Msg(F("MX29F1601 detected"));
flashSize = 2097152;
flashromType = 2;
}
else if (strcmp(flashid, "C2F9") == 0) {
println_Msg(F("MX29L3211 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 4194304;
flashromType = 2;
}
else if ((strcmp(flashid, "C2C4") == 0) || (strcmp(flashid, "C249") == 0)) {
println_Msg(F("MX29LV160 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 2097152;
flashromType = 2;
}
else if ((strcmp(flashid, "C2A7") == 0) || (strcmp(flashid, "C2A8") == 0)) {
println_Msg(F("MX29LV320 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 4194304;
flashromType = 2;
}
else if ((strcmp(flashid, "C2C9") == 0) || (strcmp(flashid, "C2CB") == 0)) {
println_Msg(F("MX29LV640 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 8388608;
flashromType = 2;
}
else if (strcmp(flashid, "C2FC") == 0) {
println_Msg(F("MX26L6420 detected"));
println_Msg(F("ATTENTION 3.3V"));
flashSize = 8388608;
flashromType = 2;
}
else {
print_Error(F("Unknown flashrom"), true);
println_Msg(" ");
}
println_Msg(" ");
println_Msg(F("Press Button..."));
display_Update();
}
/******************************************
Setup
*****************************************/
void setup_Flash8() {
// Set Address Pins to Output
//A0-A7
DDRF = 0xFF;
//A8-A15
DDRK = 0xFF;
//A16-A23
DDRL = 0xFF;
// Set Control Pins to Output RST(PH0) OE(PH1) OE_SNS(PH3) WE(PH4) WE_SNS(PH5) CE(PH6)
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
// Setting RST(PH0) OE(PH1) OE_SNS(PH3) WE(PH4) WE_SNS(PH5) HIGH
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5);
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Set Data Pins (D0-D7) to Input
DDRC = 0x00;
// Disable Internal Pullups
PORTC = 0x00;
}
void setup_Flash16() {
// Set Address Pins to Output
//A0-A7
DDRF = 0xFF;
//A8-A15
DDRK = 0xFF;
//A16-A23
DDRL = 0xFF;
// Set Control Pins to Output RST(PH0) OE(PH1) BYTE(PH3) WE(PH4) WP(PH5) CE(PH6)
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
// Set Data Pins (D0-D15) to Input
DDRC = 0x00;
DDRA = 0x00;
// Disable Internal Pullups
PORTC = 0x00;
PORTA = 0x00;
// Setting RST(PH0) OE(PH1) BYTE(PH3) WE(PH4) WP(PH5) HIGH
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5);
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
delay(100);
}
void setup_Eprom() {
// Set Address Pins to Output
//A0-A7
DDRF = 0xFF;
//A8-A15
DDRK = 0xFF;
//A16-A23
DDRL = 0xFF;
// Set Data Pins (D0-D15) to Input
DDRC = 0x00;
DDRA = 0x00;
// Disable Internal Pullups
PORTC = 0x00;
PORTA = 0x00;
// Set Control Pins to Output VPP/OE(PH5) CE(PH6)
DDRH |= (1 << 5) | (1 << 6);
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
// Setting VPP/OE(PH5) LOW
PORTH &= ~(1 << 5);
// 27C322 is a 4MB eprom
flashSize = 4194304;
}
/******************************************
I/O Functions
*****************************************/
// Switch data pins to read
void dataIn8() {
// Set to Input
DDRC = 0x00;
}
// Switch data pins to write
void dataOut16() {
DDRC = 0xFF;
DDRA = 0xFF;
}
// Switch data pins to read
void dataIn16() {
DDRC = 0x00;
DDRA = 0x00;
}
/******************************************
Low level functions
*****************************************/
void writeByte_Flash(unsigned long myAddress, byte myData) {
PORTF = myAddress & 0xFF;
if (hiROM) {
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
}
else {
PORTK = (myAddress >> 8) & 0x7F;
// Set A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
PORTL = (myAddress >> 15) & 0xFF;
}
PORTC = myData;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Switch WE(PH4) WE_SNS(PH5) to LOW
PORTH &= ~((1 << 4) | (1 << 5));
// Leave WE low for at least 60ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Switch WE(PH4) WE_SNS(PH5) to HIGH
PORTH |= (1 << 4) | (1 << 5);
// Leave WE high for at least 50ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
byte readByte_Flash(unsigned long myAddress) {
PORTF = myAddress & 0xFF;
if (hiROM) {
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
}
else {
PORTK = (myAddress >> 8) & 0x7F;
// Set A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
PORTL = (myAddress >> 15) & 0xFF;
}
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Setting OE(PH1) OE_SNS(PH3) LOW
PORTH &= ~((1 << 1) | (1 << 3));
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Read
byte tempByte = PINC;
// Setting OE(PH1) OE_SNS(PH3) HIGH
PORTH |= (1 << 1) | (1 << 3);
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
return tempByte;
}
void writeWord_Flash(unsigned long myAddress, word myData) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t");
// Switch WE(PH4) to LOW
PORTH &= ~(1 << 4);
// Leave WE low for at least 60ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Switch WE(PH4) to HIGH
PORTH |= (1 << 4);
// Leave WE high for at least 50ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
word readWord_Flash(unsigned long myAddress) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t");
// Setting OE(PH1) LOW
PORTH &= ~(1 << 1);
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Read
word tempWord = ( ( PINA & 0xFF ) << 8 ) | ( PINC & 0xFF );
__asm__("nop\n\t");
// Setting OE(PH1) HIGH
PORTH |= (1 << 1);
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
return tempWord;
}
/******************************************
29F032 flashrom functions
*****************************************/
void resetFlash29F032() {
// Set data pins to output
dataOut();
// Reset command sequence
writeByte_Flash(0x555, 0xf0);
// Set data pins to input again
dataIn8();
delay(500);
}
void idFlash29F032() {
// Set data pins to output
dataOut();
// ID command sequence
writeByte_Flash(0x555, 0xaa);
writeByte_Flash(0x2aa, 0x55);
writeByte_Flash(0x555, 0x90);
// Set data pins to input again
dataIn8();
// Read the two id bytes into a string
sprintf(flashid, "%02X%02X", readByte_Flash(0), readByte_Flash(1));
}
void eraseFlash29F032() {
// Set data pins to output
dataOut();
// Erase command sequence
writeByte_Flash(0x555, 0xaa);
writeByte_Flash(0x2aa, 0x55);
writeByte_Flash(0x555, 0x80);
writeByte_Flash(0x555, 0xaa);
writeByte_Flash(0x2aa, 0x55);
writeByte_Flash(0x555, 0x10);
// Set data pins to input again
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
// After a completed erase D7 will output 1
while ((statusReg & 0x80) != 0x80) {
// Blink led
PORTB ^= (1 << 4);
delay(100);
// Update Status
statusReg = readByte_Flash(0);
}
}
void writeFlash29F032() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
print_Msg(F("Flashing file "));
print_Msg(filePath);
println_Msg(F("..."));
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut();
// Fill sdBuffer
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
myFile.read(sdBuffer, 512);
// Blink led
if (currByte % 2048 == 0)
PORTB ^= (1 << 4);
for (int c = 0; c < 512; c++) {
// Write command sequence
writeByte_Flash(0x555, 0xaa);
writeByte_Flash(0x2aa, 0x55);
writeByte_Flash(0x555, 0xa0);
// Write current byte
writeByte_Flash(currByte + c, sdBuffer[c]);
busyCheck29F032(sdBuffer[c]);
}
}
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file"));
display_Update();
}
}
void busyCheck29F032(byte c) {
// Set data pins to input
dataIn8();
// Setting OE(PH1) OE_SNS(PH3) CE(PH6)LOW
PORTH &= ~((1 << 1) | (1 << 3) | (1 << 6));
// Setting WE(PH4) WE_SNES(PH5) HIGH
PORTH |= (1 << 4) | (1 << 5);
//When the Embedded Program algorithm is complete, the device outputs the datum programmed to D7
while ((PINC & 0x80) != (c & 0x80)) {}
// Set data pins to output
dataOut();
// Setting OE(PH1) OE_SNS(PH3) HIGH
PORTH |= (1 << 1) | (1 << 3);
}
/******************************************
29F1610 flashrom functions
*****************************************/
void resetFlash29F1610() {
// Set data pins to output
dataOut();
// Reset command sequence
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, 0xf0);
// Set data pins to input again
dataIn8();
delay(500);
}
void writeFlash29F1610() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut();
for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 3072 == 0)
PORTB ^= (1 << 4);
// Check if write is complete
delayMicroseconds(100);
busyCheck29F1610();
// Write command sequence
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, 0xa0);
// Write one full page at a time
for (byte c = 0; c < 128; c++) {
writeByte_Flash(currByte + c, sdBuffer[c]);
}
}
// Check if write is complete
busyCheck29F1610();
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD"));
display_Update();
}
}
void writeFlash29F1601() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut();
for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 3072 == 0)
PORTB ^= (1 << 4);
// Check if write is complete
delayMicroseconds(100);
busyCheck29F1610();
// Write command sequence
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, 0xa0);
// Write one full page at a time
for (byte c = 0; c < 128; c++) {
writeByte_Flash(currByte + c, sdBuffer[c]);
if (c == 127) {
// Write the last byte twice or else it won't write at all
writeByte_Flash(currByte + c, sdBuffer[c]);
}
}
}
// Check if write is complete
busyCheck29F1610();
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD"));
display_Update();
}
}
void idFlash29F1610() {
// Set data pins to output
dataOut();
// ID command sequence
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, 0x90);
// Set data pins to input again
dataIn8();
// Read the two id bytes into a string
sprintf(flashid, "%02X%02X", readByte_Flash(0), readByte_Flash(2));
}
byte readStatusReg() {
// Set data pins to output
dataOut();
// Status reg command sequence
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, 0x70);
// Set data pins to input again
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
return statusReg;
}
void eraseFlash29F1610() {
// Set data pins to output
dataOut();
// Erase command sequence
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, 0x80);
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, 0x10);
// Set data pins to input again
dataIn8();
busyCheck29F1610();
}
// Delay between write operations based on status register
void busyCheck29F1610() {
// Set data pins to input
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
while ((statusReg & 0x80) != 0x80) {
statusReg = readByte_Flash(0);
}
// Set data pins to output
dataOut();
}
/******************************************
MX29LV flashrom functions
*****************************************/
void busyCheck29LV640(unsigned long myAddress, byte myData) {
// Set data pins to input
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(myAddress);
while ((statusReg & 0x80) != (myData & 0x80)) {
statusReg = readByte_Flash(myAddress);
}
// Set data pins to output
dataOut();
}
void writeFlash29LV640() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut();
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
// Fill sdBuffer
myFile.read(sdBuffer, 512);
// Blink led
if (currByte % 4096 == 0)
PORTB ^= (1 << 4);
for (int c = 0; c < 512; c++) {
// Write command sequence
writeByte_Flash(0x555 << 1, 0xaa);
writeByte_Flash(0x2aa << 1, 0x55);
writeByte_Flash(0x555 << 1, 0xa0);
// Write current byte
writeByte_Flash(currByte + c, sdBuffer[c]);
// Check if write is complete
busyCheck29LV640(currByte + c, sdBuffer[c]);
}
}
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD"));
display_Update();
}
}
/******************************************
S29GL flashrom functions
*****************************************/
void writeFlash29GL(unsigned long sectorSize, byte bufferSize) {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut();
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
// Blink led
PORTB ^= (1 << 4);
// Write to flashrom
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
// Write bufferSize bytes at a time
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += bufferSize) {
// 2 unlock commands
writeByte_Flash(0x555 << 1, 0xaa);
writeByte_Flash(0x2aa << 1, 0x55);
// Write buffer load command at sector address
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer, 0x25);
// Write byte count (minus 1) at sector address
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer, bufferSize - 1);
// Load bytes into buffer
for (byte currByte = 0; currByte < bufferSize; currByte++) {
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer + currByte, sdBuffer[currWriteBuffer + currByte]);
}
// Write Buffer to Flash
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer + bufferSize - 1, 0x29);
// Read the status register at last written address
dataIn8();
byte statusReg = readByte_Flash(currSector + currSdBuffer + currWriteBuffer + bufferSize - 1);
while ((statusReg & 0x80) != (sdBuffer[currWriteBuffer + bufferSize - 1] & 0x80)) {
statusReg = readByte_Flash(currSector + currSdBuffer + currWriteBuffer + bufferSize - 1);
}
dataOut();
}
}
}
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD"));
display_Update();
}
}
/******************************************
Common flashrom functions
*****************************************/
void blankcheck_Flash() {
println_Msg(F("Please wait..."));
display_Update();
blank = 1;
for (unsigned long currByte = 0; currByte < flashSize; currByte++) {
// Check if all bytes are 0xFF
if (readByte_Flash(currByte) != 0xFF) {
currByte = flashSize;
blank = 0;
}
}
if (blank) {
println_Msg(F("Flashrom is empty"));
display_Update();
}
else {
print_Error(F("Error: Not blank"), false);
}
}
void verifyFlash() {
println_Msg(F("Verifying..."));
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
blank = 0;
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
//fill sdBuffer
myFile.read(sdBuffer, 512);
for (int c = 0; c < 512; c++) {
if (readByte_Flash(currByte + c) != sdBuffer[c]) {
blank++;
}
}
}
if (blank == 0) {
println_Msg(F("Flashrom verified OK"));
display_Update();
}
else {
print_Msg(F("Error: "));
print_Msg(blank);
println_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD"));
display_Update();
}
}
void readFlash() {
// Reset to root directory
sd.chdir("/");
// Get name, add extension and convert to char array for sd lib
EEPROM_readAnything(10, foldern);
sd.mkdir("FLASH", true);
sd.chdir("FLASH");
sprintf(fileName, "FL%d", foldern);
strcat(fileName, ".bin");
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(10, foldern);
display_Clear();
print_Msg(F("Saving as "));
print_Msg(fileName);
println_Msg(F("..."));
display_Update();
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("Can't create file on SD"), true);
}
for (unsigned long currByte = 0; currByte < flashSize; currByte += 512) {
for (int c = 0; c < 512; c++) {
sdBuffer[c] = readByte_Flash(currByte + c);
}
myFile.write(sdBuffer, 512);
}
// Close the file:
myFile.close();
println_Msg(F("Finished reading"));
display_Update();
}
void printFlash(int numBytes) {
char myBuffer[3];
for (int currByte = 0; currByte < numBytes; currByte += 10) {
for (int c = 0; c < 10; c++) {
itoa (readByte_Flash(currByte + c), myBuffer, 16);
for (int i = 0; i < 2 - strlen(myBuffer); i++) {
print_Msg("0");
}
// Now print the significant bits
print_Msg(myBuffer);
}
println_Msg("");
}
display_Update();
}
/******************************************
29L3211 16bit flashrom functions
*****************************************/
void resetFlash16() {
// Set data pins to output
dataOut16();
// Reset command sequence
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0xf0);
// Set data pins to input again
dataIn16();
delay(500);
}
void writeFlash16() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut16();
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
int d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) {
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 2048 == 0)
PORTB ^= (1 << 4);
// Check if write is complete
delayMicroseconds(100);
busyCheck16();
// Write command sequence
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0xa0);
// Write one full page at a time
for (byte c = 0; c < 64; c++) {
word currWord = ( ( sdBuffer[d + 1] & 0xFF ) << 8 ) | ( sdBuffer[d] & 0xFF );
writeWord_Flash(currByte + c, currWord);
d += 2;
}
d = 0;
}
// Check if write is complete
busyCheck16();
// Set data pins to input again
dataIn16();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD."));
display_Update();
}
}
void writeFlash16_29F1601() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut16();
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
int d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) {
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 2048 == 0)
PORTB ^= (1 << 4);
// Check if write is complete
delayMicroseconds(100);
busyCheck16();
// Write command sequence
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0xa0);
// Write one full page at a time
for (byte c = 0; c < 64; c++) {
word currWord = ( ( sdBuffer[d + 1] & 0xFF ) << 8 ) | ( sdBuffer[d] & 0xFF );
writeWord_Flash(currByte + c, currWord);
if (c == 63) {
// Write the last byte twice or else it won't write at all
writeWord_Flash(currByte + c, sdBuffer[d + 1]);
}
d += 2;
}
d = 0;
}
// Check if write is complete
busyCheck16();
// Set data pins to input again
dataIn16();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD."));
display_Update();
}
}
void idFlash16() {
// Set data pins to output
dataOut16();
// ID command sequence
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0x90);
// Set data pins to input again
dataIn16();
// Read the two id bytes into a string
sprintf(flashid, "%02X%02X", readWord_Flash(0) & 0xFF, readWord_Flash(1) & 0xFF);
}
byte readStatusReg16() {
// Set data pins to output
dataOut16();
// Status reg command sequence
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0x70);
// Set data pins to input again
dataIn16();
// Read the status register
byte statusReg = readWord_Flash(0);
return statusReg;
}
void eraseFlash16() {
// Set data pins to output
dataOut16();
// Erase command sequence
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0x80);
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0x10);
// Set data pins to input again
dataIn16();
busyCheck16();
}
void blankcheck16() {
println_Msg(F("Please wait..."));
display_Update();
blank = 1;
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte++) {
if (readWord_Flash(currByte) != 0xFFFF) {
currByte = flashSize / 2;
blank = 0;
}
}
if (blank) {
println_Msg(F("Flashrom is empty."));
display_Update();
}
else {
print_Error(F("Error: Not blank"), false);
}
}
void verifyFlash16() {
println_Msg(F("Verifying..."));
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize) {
print_Error(F("File size exceeds flash size."), true);
}
blank = 0;
word d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 256) {
//fill sdBuffer
myFile.read(sdBuffer, 512);
for (int c = 0; c < 256; c++) {
word currWord = ((sdBuffer[d + 1] << 8) | sdBuffer[d]);
if (readWord_Flash(currByte + c) != currWord) {
blank++;
}
d += 2;
}
d = 0;
}
if (blank == 0) {
println_Msg(F("Flashrom verified OK"));
display_Update();
}
else {
println_Msg(F("Verification ERROR!"));
print_Msg(blank);
print_Error(F("B did not verify."), false);
display_Update();
}
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD."));
display_Update();
}
}
void readFlash16() {
// Reset to root directory
sd.chdir("/");
// Get name, add extension and convert to char array for sd lib
EEPROM_readAnything(10, foldern);
sd.mkdir("FLASH", true);
sd.chdir("FLASH");
sprintf(fileName, "FL%d", foldern);
strcat(fileName, ".bin");
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(10, foldern);
display_Clear();
print_Msg(F("Saving as "));
print_Msg(fileName);
println_Msg(F("..."));
display_Update();
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
println_Msg(F("Can't create file on SD."));
display_Update();
while (1);
}
word d = 0;
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte += 256) {
for (word c = 0; c < 256; c++) {
word currWord = readWord_Flash(currByte + c);
// Split word into two bytes
// Right
sdBuffer[d + 1] = (( currWord >> 8 ) & 0xFF);
// Left
sdBuffer[d] = (currWord & 0xFF);
d += 2;
}
myFile.write(sdBuffer, 512);
d = 0;
}
// Close the file:
myFile.close();
println_Msg(F("Finished reading."));
display_Update();
}
void printFlash16(int numBytes) {
/*
right_byte = short_val & 0xFF;
left_byte = ( short_val >> 8 ) & 0xFF
short_val = ( ( left_byte & 0xFF ) << 8 ) | ( right_byte & 0xFF );
*/
char buf[3];
for (int currByte = 0; currByte < numBytes / 2; currByte += 5) {
// 5 words per line
for (int c = 0; c < 5; c++) {
word currWord = readWord_Flash(currByte + c);
// Split word into two bytes
byte left_byte = currWord & 0xFF;
byte right_byte = ( currWord >> 8 ) & 0xFF;
sprintf (buf, "%x", left_byte);
for (int i = 0; i < 2 - strlen(buf); i++) {
print_Msg("0");
}
// Now print the significant bits
print_Msg(buf);
sprintf (buf, "%x", right_byte);
for (int i = 0; i < 2 - strlen(buf); i++) {
print_Msg("0");
}
// Now print the significant bits
print_Msg(buf);
}
println_Msg("");
}
display_Update();
}
// Delay between write operations based on status register
void busyCheck16() {
// Set data pins to input
dataIn16();
// Read the status register
word statusReg = readWord_Flash(0);
while ((statusReg | 0xFF7F) != 0xFFFF) {
statusReg = readWord_Flash(0);
}
// Set data pins to output
dataOut16();
}
/******************************************
MX29LV flashrom functions 16bit
*****************************************/
// Delay between write operations based on status register
void busyCheck16_29LV640(unsigned long myAddress, word myData) {
// Set data pins to input
dataIn16();
// Read the status register
word statusReg = readWord_Flash(myAddress);
while ((statusReg & 0x80) != (myData & 0x80)) {
statusReg = readWord_Flash(myAddress);
}
// Set data pins to output
dataOut16();
}
void writeFlash16_29LV640() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Set data pins to output
dataOut16();
int d = 0;
for (unsigned long currWord = 0; currWord < fileSize / 2; currWord += 256) {
// Fill sdBuffer
myFile.read(sdBuffer, 512);
// Blink led
if (currWord % 4096 == 0)
PORTB ^= (1 << 4);
for (int c = 0; c < 256; c++) {
// Write command sequence
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, 0xa0);
// Write current word
word myWord = ( ( sdBuffer[d + 1] & 0xFF ) << 8 ) | ( sdBuffer[d] & 0xFF );
writeWord_Flash(currWord + c, myWord);
d += 2;
// Check if write is complete
busyCheck16_29LV640(currWord + c, myWord);
}
d = 0;
}
// Set data pins to input again
dataIn16();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD."));
display_Update();
}
}
/******************************************
Eprom functions
*****************************************/
word writeWord_Eprom(unsigned long myAddress, word myData) {
// Data out
DDRC = 0xFF;
DDRA = 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t");
// Set address
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Set data
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
__asm__("nop\n\t");
// Switch VPP/OE(PH5) to HIGH
PORTH |= (1 << 5);
// Wait 1us for VPP High to Chip Enable Low
delayMicroseconds(1);
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Leave VPP HIGH for 50us Chip Enable Program Pulse Width
delayMicroseconds(55);
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
// Wait 2us for Chip Enable High to VPP Transition
delayMicroseconds(2);
// Switch VPP/OE(PH5) to LOW
PORTH &= ~(1 << 5);
// Leave CE High for 1us for VPP Low to Chip Enable Low
delayMicroseconds(1);
// Data in
DDRC = 0x00;
DDRA = 0x00;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Wait 1us for Chip Enable Low to Output Valid while program verify
delayMicroseconds(3);
// Read
word tempWord = ( ( PINA & 0xFF ) << 8 ) | ( PINC & 0xFF );
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
// Delay 130ns for Chip Enable High to Output Hi-Z
__asm__("nop\n\t""nop\n\t""nop\n\t");
return tempWord;
}
word readWord_Eprom(unsigned long myAddress) {
// Data in
DDRC = 0x00;
DDRA = 0x00;
// Set address
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t");
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Delay for 100ns for Address Valid/Chip Enable Low to Output Valid
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Read
word tempWord = ( ( PINA & 0xFF ) << 8 ) | ( PINC & 0xFF );
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
return tempWord;
}
void blankcheck_Eprom() {
println_Msg(F("Please wait..."));
display_Update();
blank = 1;
for (unsigned long currWord = 0; currWord < flashSize / 2; currWord++) {
if (readWord_Eprom(currWord) != 0xFFFF) {
currWord = flashSize / 2;
blank = 0;
}
}
if (blank) {
println_Msg(F("Flashrom is empty."));
display_Update();
}
else {
print_Error(F("Error: Not blank"), false);
}
}
void read_Eprom() {
// Reset to root directory
sd.chdir("/");
// Get name, add extension and convert to char array for sd lib
EEPROM_readAnything(10, foldern);
sd.mkdir("FLASH", true);
sd.chdir("FLASH");
sprintf(fileName, "FL%d", foldern);
strcat(fileName, ".bin");
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(10, foldern);
display_Clear();
print_Msg(F("Saving as "));
print_Msg(fileName);
println_Msg(F("..."));
display_Update();
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
println_Msg(F("Can't create file on SD."));
display_Update();
while (1);
}
word d = 0;
for (unsigned long currWord = 0; currWord < flashSize / 2; currWord += 256) {
for (word c = 0; c < 256; c++) {
word myWord = readWord_Eprom(currWord + c);
// Split word into two bytes
// Right
sdBuffer[d + 1] = ((myWord >> 8 ) & 0xFF);
// Left
sdBuffer[d] = (myWord & 0xFF);
d += 2;
}
myFile.write(sdBuffer, 512);
d = 0;
}
// Close the file:
myFile.close();
println_Msg(F("Finished reading."));
display_Update();
}
void write_Eprom() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Flashing file "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize)
print_Error(F("File size exceeds flash size."), true);
// Switch VPP/OE(PH5) to HIGH
PORTH |= (1 << 5);
delay(1000);
for (unsigned long currWord = 0; currWord < fileSize / 2; currWord += 256) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
int d = 0;
// Blink led
if (currWord % 2048 == 0)
PORTB ^= (1 << 4);
// Work through SD buffer
for (int c = 0; c < 256; c++) {
word checkWord;
word myWord = ( ( sdBuffer[d + 1] & 0xFF ) << 8 ) | ( sdBuffer[d] & 0xFF );
// Error counter
byte n = 0;
// Presto III allows up to 25 rewrites per word
do {
// Write word
checkWord = writeWord_Eprom(currWord + c, myWord);
// Check for fail
if (n == 25) {
print_Msg(F("Program Error 0x"));
println_Msg(currWord + c, HEX);
print_Msg(F("0x"));
print_Msg(readWord_Eprom(currWord + c), HEX);
print_Msg(F(" != 0x"));
println_Msg(myWord, HEX);
print_Error(F("Press button to reset"), true);
}
n++;
}
while (checkWord != myWord);
d += 2;
}
}
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD."));
display_Update();
}
}
void verify_Eprom() {
println_Msg(F("Verifying..."));
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize) {
print_Error(F("File size exceeds flash size."), true);
}
blank = 0;
word d = 0;
for (unsigned long currWord = 0; currWord < (fileSize / 2); currWord += 256) {
//fill sdBuffer
myFile.read(sdBuffer, 512);
for (int c = 0; c < 256; c++) {
word myWord = (((sdBuffer[d + 1] & 0xFF) << 8) | (sdBuffer[d] & 0xFF));
if (readWord_Eprom(currWord + c) != myWord) {
blank++;
}
d += 2;
}
d = 0;
}
if (blank == 0) {
println_Msg(F("Eprom verified OK"));
display_Update();
}
else {
println_Msg(F("Verification ERROR!"));
print_Msg(blank);
print_Error(F(" words did not verify."), false);
display_Update();
}
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file on SD."));
display_Update();
}
}
void print_Eprom(int numBytes) {
char buf[3];
for (int currByte = 0; currByte < numBytes / 2; currByte += 5) {
// 5 words per line
for (int c = 0; c < 5; c++) {
word currWord = readWord_Eprom(currByte + c);
// Split word into two bytes
byte left_byte = currWord & 0xFF;
byte right_byte = ( currWord >> 8 ) & 0xFF;
sprintf (buf, "%x", left_byte);
for (int i = 0; i < 2 - strlen(buf); i++) {
print_Msg("0");
}
// Now print the significant bits
print_Msg(buf);
sprintf (buf, "%x", right_byte);
for (int i = 0; i < 2 - strlen(buf); i++) {
print_Msg("0");
}
// Now print the significant bits
print_Msg(buf);
}
println_Msg("");
}
display_Update();
}
//******************************************
// End of File
//******************************************
Reference in New Issue View Git Blame Copy Permalink