mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-26 14:34:15 +01:00
632 lines
17 KiB
C++
632 lines
17 KiB
C++
//******************************************
|
|
// VECTREX MODULE
|
|
//******************************************
|
|
#ifdef enable_VECTREX
|
|
// Vectrex
|
|
// Cartridge Pinout
|
|
// 36P 2.54mm pitch connector
|
|
//
|
|
// RIGHT
|
|
// +-------+
|
|
// +5V -| 2 1 |- /HALT
|
|
// +5V -| 4 3 |- A7
|
|
// A8 -| 6 5 |- A6
|
|
// A9 -| 8 7 |- A5 B
|
|
// L A11 -| 10 9 |- A4 O
|
|
// A /OE -| 12 11 |- A3 T
|
|
// B A10 -| 14 13 |- A2 T
|
|
// E A15 -| 16 15 |- A1 O
|
|
// L D7 -| 18 17 |- A0 M
|
|
// D6 -| 20 19 |- D0
|
|
// S D5 -| 22 21 |- D1 S
|
|
// I D4 -| 24 23 |- D2 I
|
|
// D D3 -| 26 25 |- GND D
|
|
// E GND -| 28 27 |- GND E
|
|
// R/W -| 30 29 |- A12
|
|
// /CART -| 32 31 |- A13
|
|
// /NMI -| 34 33 |- A14
|
|
// /IRQ -| 36 35 |- PB6
|
|
// +-------+
|
|
// LEFT
|
|
//
|
|
// LABEL SIDE
|
|
//
|
|
// /IRQ /NMI /CART R/W GND D3 D4 D5 D6 D7 A15 A10 /OE A11 A9 A8 +5V +5V
|
|
// +-------------------------------------------------------------------------------------------+
|
|
// | 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 |
|
|
// LEFT | | RIGHT
|
|
// | 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 |
|
|
// +-------------------------------------------------------------------------------------------+
|
|
// PB6 A14 A13 A12 GND GND D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 /HALT
|
|
//
|
|
// BOTTOM SIDE
|
|
|
|
// CONTROL PINS:
|
|
// /OE(PH1) - SNES CPUCLK
|
|
// /CART(PH3) - SNES /CS
|
|
// PB6(PH5) - SNES /WR
|
|
// R/W(PH6) - SNES /RD
|
|
|
|
//******************************************
|
|
// Defines
|
|
//******************************************
|
|
#define CLK_ENABLE PORTH |= (1 << 1) // /E HIGH
|
|
#define CLK_DISABLE PORTH &= ~(1 << 1) // /E LOW
|
|
#define PB6_ENABLE PORTH |= (1 << 5) // PB6 HIGH
|
|
#define PB6_DISABLE PORTH &= ~(1 << 5) // PB6 LOW
|
|
|
|
byte VECTREX[] = { 4, 8, 12 };
|
|
byte vectrexlo = 0; // Lowest Entry
|
|
byte vectrexhi = 2; // Highest Entry
|
|
byte vectrexsize;
|
|
byte newvectrexsize;
|
|
|
|
// EEPROM MAPPING
|
|
// 08 ROM SIZE
|
|
|
|
//******************************************
|
|
// Menu
|
|
//******************************************
|
|
// Base Menu
|
|
static const char vectrexMenuItem1[] PROGMEM = "Select Cart";
|
|
static const char vectrexMenuItem2[] PROGMEM = "Read ROM";
|
|
static const char vectrexMenuItem3[] PROGMEM = "Set Size";
|
|
static const char* const menuOptionsVECTREX[] PROGMEM = { vectrexMenuItem1, vectrexMenuItem2, vectrexMenuItem3, string_reset2 };
|
|
|
|
void setup_VECTREX() {
|
|
// Request 5V
|
|
setVoltage(VOLTS_SET_5V);
|
|
|
|
// Set Address Pins to Output
|
|
// Vectrex uses A0-A15 [A16-A23 UNUSED]
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// ---(PH0) /OE(PH1) /CART(PH3) ---(PH4) PB6(PH5) R/W(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
|
|
// Setting Control Pins to HIGH
|
|
// ---(PH0) /OE(PH1) /CART(PH3) ---(PH4) PB6(PH5) R/W(PH6)
|
|
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set Unused Data Pins (PA0-PA7) to Output
|
|
DDRA = 0xFF;
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTA = 0xFF;
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
// Set /CART LOW
|
|
PORTH &= ~(1 << 3); // Enable Cart
|
|
// Set /OE LOW
|
|
PORTH &= ~(1 << 1); // Output Enable
|
|
|
|
checkStatus_VECTREX();
|
|
strcpy(romName, "VECTREX");
|
|
|
|
mode = mode_VECTREX;
|
|
}
|
|
|
|
void vectrexMenu() {
|
|
convertPgm(menuOptionsVECTREX, 4);
|
|
uint8_t mainMenu = question_box(F("VECTREX MENU"), menuOptions, 4, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Select Cart
|
|
setCart_VECTREX();
|
|
wait();
|
|
setup_VECTREX();
|
|
break;
|
|
|
|
case 1:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_VECTREX();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 2:
|
|
// Set Size
|
|
setROMSize_VECTREX();
|
|
break;
|
|
|
|
case 3:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// READ CODE
|
|
//******************************************
|
|
|
|
uint8_t readData_VECTREX(uint16_t addr) // Add Input Pullup
|
|
{
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0xFF; // A8-A15
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
PORTC = 0xFF; // Input Pullup
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP; // Added delay for better read
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
uint8_t ret = PINC;
|
|
|
|
return ret;
|
|
}
|
|
|
|
void readSegment_VECTREX(uint16_t startaddr, uint16_t endaddr) {
|
|
for (uint16_t addr = startaddr; addr < endaddr; addr += 512) {
|
|
for (int w = 0; w < 512; w++) {
|
|
uint8_t temp = readData_VECTREX(addr + w);
|
|
sdBuffer[w] = temp;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// READ ROM
|
|
//******************************************
|
|
|
|
void readROM_VECTREX() {
|
|
strcpy(fileName, romName);
|
|
strcat(fileName, ".vec");
|
|
|
|
// create a new folder for storing rom file
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(folder, "VECTREX/ROM/%d", foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
display_Clear();
|
|
print_STR(saving_to_STR, 0);
|
|
print_Msg(folder);
|
|
println_Msg(F("/..."));
|
|
display_Update();
|
|
|
|
// open file on sdcard
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT))
|
|
print_FatalError(sd_error_STR);
|
|
|
|
// write new folder number back to EEPROM
|
|
foldern++;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
PB6_DISABLE; // PB6 LOW - Switch Bank
|
|
// Standard Carts 4K/8K
|
|
readSegment_VECTREX(0x0000, 0x0400); // 1K
|
|
readSegment_VECTREX(0x0400, 0x0800); // +1K = 2K
|
|
readSegment_VECTREX(0x0800, 0x0C00); // +1K = 3K
|
|
readSegment_VECTREX(0x0C00, 0x1000); // +1K = 4K
|
|
if (vectrexsize > 0) {
|
|
readSegment_VECTREX(0x1000, 0x2000); // +4K = 8K
|
|
// Dark Tower 12K
|
|
if (vectrexsize > 1)
|
|
readSegment_VECTREX(0x2000, 0x3000); // +4K = 12K
|
|
// Oversize 32K Cart
|
|
if (vectrexsize > 2)
|
|
readSegment_VECTREX(0x3000, 0x8000); // +20K = 32K
|
|
// Oversize 64K Cart - PB6 Bankswitch
|
|
if (vectrexsize > 3) { // [UNTESTED]
|
|
PB6_ENABLE; // PB6 HIGH - Switch Bank
|
|
readSegment_VECTREX(0x0000, 0x8000); // +32K = 64K
|
|
PB6_DISABLE; // Reset PB6
|
|
}
|
|
}
|
|
myFile.close();
|
|
|
|
unsigned long crcsize = VECTREX[vectrexsize] * 0x400;
|
|
calcCRC(fileName, crcsize, NULL, 0);
|
|
|
|
println_Msg(F(""));
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
//******************************************
|
|
// ROM SIZE
|
|
//******************************************
|
|
|
|
void setROMSize_VECTREX() {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
if (vectrexlo == vectrexhi)
|
|
newvectrexsize = vectrexlo;
|
|
else {
|
|
int b = 0;
|
|
int i = vectrexlo;
|
|
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(VECTREX[i]);
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
|
|
while (1) {
|
|
b = checkButton();
|
|
if (b == 2) { // Previous (doubleclick)
|
|
if (i == vectrexlo)
|
|
i = vectrexhi;
|
|
else
|
|
i--;
|
|
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(VECTREX[i]);
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
}
|
|
if (b == 1) { // Next (press)
|
|
if (i == vectrexhi)
|
|
i = vectrexlo;
|
|
else
|
|
i++;
|
|
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(VECTREX[i]);
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
}
|
|
if (b == 3) { // Long Press - Execute (hold)
|
|
newvectrexsize = i;
|
|
break;
|
|
}
|
|
}
|
|
display.setCursor(0, 56); // Display selection at bottom
|
|
}
|
|
print_Msg(F("ROM SIZE "));
|
|
print_Msg(VECTREX[newvectrexsize]);
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
delay(1000);
|
|
#else
|
|
if (vectrexlo == vectrexhi)
|
|
newvectrexsize = vectrexlo;
|
|
else {
|
|
setrom:
|
|
String sizeROM;
|
|
for (int i = 0; i < (vectrexhi - vectrexlo + 1); i++) {
|
|
Serial.print(F("Select ROM Size: "));
|
|
Serial.print(i);
|
|
Serial.print(F(" = "));
|
|
Serial.print(VECTREX[i + vectrexlo]);
|
|
Serial.println(F("K"));
|
|
}
|
|
Serial.print(F("Enter ROM Size: "));
|
|
while (Serial.available() == 0) {}
|
|
sizeROM = Serial.readStringUntil('\n');
|
|
Serial.println(sizeROM);
|
|
newvectrexsize = sizeROM.toInt() + vectrexlo;
|
|
if (newvectrexsize > vectrexhi) {
|
|
Serial.println(F("SIZE NOT SUPPORTED"));
|
|
Serial.println(F(""));
|
|
goto setrom;
|
|
}
|
|
}
|
|
Serial.print(F("ROM Size = "));
|
|
Serial.print(VECTREX[newvectrexsize]);
|
|
Serial.println(F("K"));
|
|
#endif
|
|
EEPROM_writeAnything(8, newvectrexsize);
|
|
vectrexsize = newvectrexsize;
|
|
}
|
|
|
|
void checkStatus_VECTREX() {
|
|
EEPROM_readAnything(8, vectrexsize);
|
|
if (vectrexsize > 2) {
|
|
vectrexsize = 0; // default 4KB
|
|
EEPROM_writeAnything(8, vectrexsize);
|
|
}
|
|
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("VECTREX READER"));
|
|
println_Msg(F("CURRENT SETTINGS"));
|
|
println_Msg(F(""));
|
|
print_Msg(F("ROM SIZE: "));
|
|
print_Msg(VECTREX[vectrexsize]);
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
wait();
|
|
#else
|
|
Serial.print(F("ROM SIZE: "));
|
|
Serial.print(VECTREX[vectrexsize]);
|
|
Serial.println(F("K"));
|
|
Serial.println(F(""));
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// CART SELECT CODE
|
|
//******************************************
|
|
|
|
FsFile vectrexcsvFile;
|
|
char vectrexgame[25]; // title
|
|
char vectrexrr[4]; // romsize
|
|
char vectrexll[4]; // linelength (previous line)
|
|
unsigned long vectrexcsvpos; // CSV File Position
|
|
char vectrexcartCSV[] = "vectrexcart.txt"; // CSV List
|
|
char vectrexcsvEND[] = "EOF"; // CSV End Marker for scrolling
|
|
|
|
bool readLine_VECTREX(FsFile& f, char* line, size_t maxLen) {
|
|
for (size_t n = 0; n < maxLen; n++) {
|
|
int c = f.read();
|
|
if (c < 0 && n == 0) return false; // EOF
|
|
if (c < 0 || c == '\n') {
|
|
line[n] = 0;
|
|
return true;
|
|
}
|
|
line[n] = c;
|
|
}
|
|
return false; // line too long
|
|
}
|
|
|
|
bool readVals_VECTREX(char* vectrexgame, char* vectrexrr, char* vectrexll) {
|
|
char line[31];
|
|
vectrexcsvpos = vectrexcsvFile.position();
|
|
if (!readLine_VECTREX(vectrexcsvFile, line, sizeof(line))) {
|
|
return false; // EOF or too long
|
|
}
|
|
char* comma = strtok(line, ",");
|
|
int x = 0;
|
|
while (comma != NULL) {
|
|
if (x == 0)
|
|
strcpy(vectrexgame, comma);
|
|
else if (x == 1)
|
|
strcpy(vectrexrr, comma);
|
|
else if (x == 2)
|
|
strcpy(vectrexll, comma);
|
|
comma = strtok(NULL, ",");
|
|
x += 1;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool getCartListInfo_VECTREX() {
|
|
bool buttonreleased = 0;
|
|
bool cartselected = 0;
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F(" HOLD TO FAST CYCLE"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("HOLD BUTTON TO FAST CYCLE"));
|
|
#endif
|
|
delay(2000);
|
|
#if defined(enable_OLED)
|
|
buttonVal1 = (PIND & (1 << 7)); // PD7
|
|
#elif defined(enable_LCD)
|
|
boolean buttonVal1 = (PING & (1 << 2)); //PG2
|
|
#endif
|
|
if (buttonVal1 == LOW) { // Button Held - Fast Cycle
|
|
while (1) { // Scroll Game List
|
|
while (readVals_VECTREX(vectrexgame, vectrexrr, vectrexll)) {
|
|
if (strcmp(vectrexcsvEND, vectrexgame) == 0) {
|
|
vectrexcsvFile.seek(0); // Restart
|
|
} else {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CART TITLE:"));
|
|
println_Msg(F(""));
|
|
println_Msg(vectrexgame);
|
|
display_Update();
|
|
#else
|
|
Serial.print(F("CART TITLE:"));
|
|
Serial.println(vectrexgame);
|
|
#endif
|
|
#if defined(enable_OLED)
|
|
buttonVal1 = (PIND & (1 << 7)); // PD7
|
|
#elif defined(enable_LCD)
|
|
boolean buttonVal1 = (PING & (1 << 2)); //PG2
|
|
#endif
|
|
if (buttonVal1 == HIGH) { // Button Released
|
|
buttonreleased = 1;
|
|
break;
|
|
}
|
|
if (buttonreleased) {
|
|
buttonreleased = 0; // Reset Flag
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#if defined(enable_OLED)
|
|
buttonVal1 = (PIND & (1 << 7)); // PD7
|
|
#elif defined(enable_LCD)
|
|
boolean buttonVal1 = (PING & (1 << 2)); //PG2
|
|
#endif
|
|
if (buttonVal1 == HIGH) // Button Released
|
|
break;
|
|
}
|
|
}
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display.setCursor(0, 56);
|
|
println_Msg(F("FAST CYCLE OFF"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F(""));
|
|
Serial.println(F("FAST CYCLE OFF"));
|
|
Serial.println(F("PRESS BUTTON TO STEP FORWARD"));
|
|
Serial.println(F("DOUBLE CLICK TO STEP BACK"));
|
|
Serial.println(F("HOLD TO SELECT"));
|
|
Serial.println(F(""));
|
|
#endif
|
|
while (readVals_VECTREX(vectrexgame, vectrexrr, vectrexll)) {
|
|
if (strcmp(vectrexcsvEND, vectrexgame) == 0) {
|
|
vectrexcsvFile.seek(0); // Restart
|
|
} else {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CART TITLE:"));
|
|
println_Msg(F(""));
|
|
println_Msg(vectrexgame);
|
|
display.setCursor(0, 48);
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
#else
|
|
Serial.print(F("CART TITLE:"));
|
|
Serial.println(vectrexgame);
|
|
#endif
|
|
while (1) { // Single Step
|
|
int b = checkButton();
|
|
if (b == 1) { // Continue (press)
|
|
break;
|
|
}
|
|
if (b == 2) { // Reset to Start of List (doubleclick)
|
|
byte prevline = strtol(vectrexll, NULL, 10);
|
|
vectrexcsvpos -= prevline;
|
|
vectrexcsvFile.seek(vectrexcsvpos);
|
|
break;
|
|
}
|
|
if (b == 3) { // Long Press - Select Cart (hold)
|
|
newvectrexsize = strtol(vectrexrr, NULL, 10);
|
|
EEPROM_writeAnything(8, newvectrexsize);
|
|
cartselected = 1; // SELECTION MADE
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
println_Msg(F("SELECTION MADE"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("SELECTION MADE"));
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
if (cartselected) {
|
|
cartselected = 0; // Reset Flag
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
println_Msg(F(""));
|
|
println_Msg(F("END OF FILE"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("END OF FILE"));
|
|
#endif
|
|
|
|
return false;
|
|
}
|
|
|
|
void checkCSV_VECTREX() {
|
|
if (getCartListInfo_VECTREX()) {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CART SELECTED"));
|
|
println_Msg(F(""));
|
|
println_Msg(vectrexgame);
|
|
display_Update();
|
|
// Display Settings
|
|
display.setCursor(0, 56);
|
|
print_Msg(F("CODE: R"));
|
|
println_Msg(newvectrexsize);
|
|
display_Update();
|
|
#else
|
|
Serial.println(F(""));
|
|
Serial.println(F("CART SELECTED"));
|
|
Serial.println(vectrexgame);
|
|
// Display Settings
|
|
Serial.print(F("CODE: R"));
|
|
Serial.println(newvectrexsize);
|
|
Serial.println(F(""));
|
|
#endif
|
|
} else {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display.setCursor(0, 56);
|
|
println_Msg(F("NO SELECTION"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("NO SELECTION"));
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void setCart_VECTREX() {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(vectrexcartCSV);
|
|
display_Update();
|
|
#endif
|
|
sd.chdir();
|
|
sprintf(folder, "VECTREX/CSV");
|
|
sd.chdir(folder); // Switch Folder
|
|
vectrexcsvFile = sd.open(vectrexcartCSV, O_READ);
|
|
if (!vectrexcsvFile) {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CSV FILE NOT FOUND!"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("CSV FILE NOT FOUND!"));
|
|
#endif
|
|
while (1) {
|
|
if (checkButton() != 0)
|
|
setup_VECTREX();
|
|
}
|
|
}
|
|
checkCSV_VECTREX();
|
|
vectrexcsvFile.close();
|
|
}
|
|
#endif
|