mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-10 23:15:08 +01:00
2cf7f5dbe7
The `setVoltage()` function should be called even when `ENABLE_VSELECT` is disabled because `ENABLE_3V3FIX` also uses it. There is no resource cost to do this as when both options are disabled the compiler will optimize this function out. This just "future proofs" the code so if that function ever does more it doesn't need updated everywhere. This applies to `setup_FlashVoltage()` as well. The changes to OSCR.cpp are just for code formatting and additional comments to clarify this.
580 lines
14 KiB
C++
580 lines
14 KiB
C++
//******************************************
|
|
// EMERSON ARCADIA 2001 MODULE
|
|
//******************************************
|
|
#if defined(enable_ARC)
|
|
// Emerson Arcadia 2001
|
|
// Cartridge Pinout
|
|
// 30P 2.54mm pitch connector
|
|
//
|
|
// FRONT BACK
|
|
// SIDE SIDE
|
|
// +-------+
|
|
// GND -| 2 1 |- A13 (A12)
|
|
// VCC (+5V) -| 4 3 |- D3
|
|
// A0 -| 6 5 |- D4
|
|
// A1 -| 8 7 |- D5
|
|
// A2 -| 10 9 |- D6
|
|
// A3 -| 12 11 |- D7
|
|
// A4 -| 14 13 |- D0
|
|
// A5 -| 16 15 |- D2
|
|
// A6 -| 18 17 |- D1
|
|
// A7 -| 20 19 |- NC
|
|
// A8 -| 22 21 |- NC
|
|
// A9 -| 24 23 |- NC
|
|
// A10 -| 26 25 |- GND
|
|
// A11 -| 28 27 |- GND
|
|
// A12 (/EN) -| 30 29 |- NC
|
|
// +-------+
|
|
//
|
|
// BACK
|
|
// +------------------------------------------------------------+
|
|
// | 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 |
|
|
// LEFT | | RIGHT
|
|
// | 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 |
|
|
// +------------------------------------------------------------+
|
|
// FRONT
|
|
//
|
|
|
|
byte ARC[] = { 2, 4, 6, 8 };
|
|
byte arclo = 0; // Lowest Entry
|
|
byte archi = 3; // Highest Entry
|
|
|
|
byte arcsize;
|
|
byte newarcsize;
|
|
|
|
// EEPROM MAPPING
|
|
// 08 ROM SIZE
|
|
|
|
//******************************************
|
|
// Menu
|
|
//******************************************
|
|
// Base Menu
|
|
static const char arcMenuItem1[] PROGMEM = "Select Cart";
|
|
static const char arcMenuItem2[] PROGMEM = "Read ROM";
|
|
static const char arcMenuItem3[] PROGMEM = "Set Size";
|
|
static const char arcMenuItem4[] PROGMEM = "Reset";
|
|
static const char* const menuOptionsARC[] PROGMEM = { arcMenuItem1, arcMenuItem2, arcMenuItem3, arcMenuItem4 };
|
|
|
|
void setup_ARC() {
|
|
// Request 5V
|
|
setVoltage(VOLTS_SET_5V);
|
|
|
|
// Set Address Pins to Output
|
|
// Arcadia 2001 uses A0-A13 [A14-A23 UNUSED]
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// ---(PH0) ---(PH1) ---(PH3) ---(PH4) ---(PH5) ---(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
|
|
// Setting Unused Control Pins to HIGH
|
|
// ---(PH0) ---(PH1) ---(PH3) ---(PH4) ---(PH5) ---(PH6)
|
|
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set Unused Data Pins (PA0-PA7) to Output
|
|
DDRA = 0xFF;
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTA = 0xFF;
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
checkStatus_ARC();
|
|
strcpy(romName, "ARCADIA");
|
|
|
|
mode = mode_ARC;
|
|
}
|
|
|
|
void arcMenu() {
|
|
convertPgm(menuOptionsARC, 4);
|
|
uint8_t mainMenu = question_box(F("ARCADIA 2001 MENU"), menuOptions, 4, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Select Cart
|
|
setCart_ARC();
|
|
wait();
|
|
setup_ARC();
|
|
break;
|
|
|
|
case 1:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_ARC();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 2:
|
|
// Set Size
|
|
setROMSize_ARC();
|
|
break;
|
|
|
|
case 3:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// READ CODE
|
|
//******************************************
|
|
|
|
uint8_t readData_ARC(uint16_t addr) {
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0xFF; // A8-A13
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
uint8_t ret = PINC;
|
|
|
|
return ret;
|
|
}
|
|
|
|
void readSegment_ARC(uint16_t startaddr, uint16_t endaddr) {
|
|
for (uint16_t addr = startaddr; addr < endaddr; addr += 512) {
|
|
for (int w = 0; w < 512; w++) {
|
|
uint8_t temp = readData_ARC(addr + w);
|
|
sdBuffer[w] = temp;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
|
|
void readROM_ARC() {
|
|
strcpy(fileName, romName);
|
|
strcat(fileName, ".bin");
|
|
|
|
// create a new folder for storing rom file
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(folder, "ARC/ROM/%d", foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
display_Clear();
|
|
print_Msg(F("Saving to "));
|
|
print_Msg(folder);
|
|
println_Msg(F("/..."));
|
|
display_Update();
|
|
|
|
// open file on sdcard
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
|
print_FatalError(create_file_STR);
|
|
}
|
|
// write new folder number back to EEPROM
|
|
foldern++;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
readSegment_ARC(0x0000, 0x0800); // 2K
|
|
if (arcsize > 0) {
|
|
readSegment_ARC(0x0800, 0x1000); // +2K = 4K
|
|
if (arcsize > 1) {
|
|
readSegment_ARC(0x2000, 0x2800); // +2K = 6K
|
|
if (arcsize > 2) {
|
|
readSegment_ARC(0x2800, 0x3000); // +2K = 8K
|
|
}
|
|
}
|
|
}
|
|
myFile.close();
|
|
|
|
unsigned long crcsize = ARC[arcsize] * 0x400;
|
|
calcCRC(fileName, crcsize, NULL, 0);
|
|
|
|
println_Msg(F(""));
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
//******************************************
|
|
// ROM SIZE
|
|
//******************************************
|
|
|
|
void setROMSize_ARC() {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
if (arclo == archi)
|
|
newarcsize = arclo;
|
|
else {
|
|
int b = 0;
|
|
int i = arclo;
|
|
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(ARC[i]);
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
|
|
while (1) {
|
|
b = checkButton();
|
|
if (b == 2) { // Previous (doubleclick)
|
|
if (i == arclo)
|
|
i = archi;
|
|
else
|
|
i--;
|
|
|
|
// Only update display after input because of slow LCD library
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(ARC[i]);
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
}
|
|
if (b == 1) { // Next (press)
|
|
if (i == archi)
|
|
i = arclo;
|
|
else
|
|
i++;
|
|
|
|
// Only update display after input because of slow LCD library
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(ARC[i]);
|
|
println_Msg(F(""));
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
}
|
|
if (b == 3) { // Long Press - Execute (hold)
|
|
newarcsize = i;
|
|
break;
|
|
}
|
|
}
|
|
display.setCursor(0, 56); // Display selection at bottom
|
|
}
|
|
print_Msg(F("ROM SIZE "));
|
|
print_Msg(ARC[newarcsize]);
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
delay(1000);
|
|
#else
|
|
if (arclo == archi)
|
|
newarcsize = arclo;
|
|
else {
|
|
setrom:
|
|
String sizeROM;
|
|
for (int i = 0; i < (archi - arclo + 1); i++) {
|
|
Serial.print(F("Select ROM Size: "));
|
|
Serial.print(i);
|
|
Serial.print(F(" = "));
|
|
Serial.print(ARC[i + arclo]);
|
|
Serial.println(F("K"));
|
|
}
|
|
Serial.print(F("Enter ROM Size: "));
|
|
while (Serial.available() == 0) {}
|
|
sizeROM = Serial.readStringUntil('\n');
|
|
Serial.println(sizeROM);
|
|
newarcsize = sizeROM.toInt() + arclo;
|
|
if (newarcsize > archi) {
|
|
Serial.println(F("SIZE NOT SUPPORTED"));
|
|
Serial.println(F(""));
|
|
goto setrom;
|
|
}
|
|
}
|
|
Serial.print(F("ROM Size = "));
|
|
Serial.print(ARC[newarcsize]);
|
|
Serial.println(F("K"));
|
|
#endif
|
|
EEPROM_writeAnything(8, newarcsize);
|
|
arcsize = newarcsize;
|
|
}
|
|
|
|
void checkStatus_ARC() {
|
|
EEPROM_readAnything(8, arcsize);
|
|
if (arcsize > 3) {
|
|
arcsize = 0;
|
|
EEPROM_writeAnything(8, arcsize);
|
|
}
|
|
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("ARCADIA 2001 READER"));
|
|
println_Msg(F("CURRENT SETTINGS"));
|
|
println_Msg(F(""));
|
|
print_Msg(F("ROM SIZE: "));
|
|
print_Msg(ARC[arcsize]);
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
wait();
|
|
#else
|
|
Serial.print(F("CURRENT ROM SIZE: "));
|
|
Serial.print(ARC[arcsize]);
|
|
Serial.println(F("K"));
|
|
Serial.println(F(""));
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// CART SELECT CODE
|
|
//******************************************
|
|
|
|
FsFile arccsvFile;
|
|
char arcgame[20]; // title
|
|
char arcrr[3]; // romsize
|
|
char arcll[4]; // linelength (previous line)
|
|
unsigned long arccsvpos; // CSV File Position
|
|
char arccartCSV[] = "arccart.txt"; // CSV List
|
|
char arccsvEND[] = "EOF"; // CSV End Marker for scrolling
|
|
|
|
bool readLine_ARC(FsFile& f, char* line, size_t maxLen) {
|
|
for (size_t n = 0; n < maxLen; n++) {
|
|
int c = f.read();
|
|
if (c < 0 && n == 0) return false; // EOF
|
|
if (c < 0 || c == '\n') {
|
|
line[n] = 0;
|
|
return true;
|
|
}
|
|
line[n] = c;
|
|
}
|
|
return false; // line too long
|
|
}
|
|
|
|
bool readVals_ARC(char* arcgame, char* arcrr, char* arcll) {
|
|
char line[26];
|
|
arccsvpos = arccsvFile.position();
|
|
if (!readLine_ARC(arccsvFile, line, sizeof(line))) {
|
|
return false; // EOF or too long
|
|
}
|
|
char* comma = strtok(line, ",");
|
|
int x = 0;
|
|
while (comma != NULL) {
|
|
if (x == 0)
|
|
strcpy(arcgame, comma);
|
|
else if (x == 1)
|
|
strcpy(arcrr, comma);
|
|
else if (x == 2)
|
|
strcpy(arcll, comma);
|
|
comma = strtok(NULL, ",");
|
|
x += 1;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool getCartListInfo_ARC() {
|
|
bool buttonreleased = 0;
|
|
bool cartselected = 0;
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F(" HOLD TO FAST CYCLE"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("HOLD BUTTON TO FAST CYCLE"));
|
|
#endif
|
|
delay(2000);
|
|
#if defined(enable_OLED)
|
|
buttonVal1 = (PIND & (1 << 7)); // PD7
|
|
#elif defined(enable_LCD)
|
|
boolean buttonVal1 = (PING & (1 << 2)); //PG2
|
|
#endif
|
|
if (buttonVal1 == LOW) { // Button Held - Fast Cycle
|
|
while (1) { // Scroll Game List
|
|
while (readVals_ARC(arcgame, arcrr, arcll)) {
|
|
if (strcmp(arccsvEND, arcgame) == 0) {
|
|
arccsvFile.seek(0); // Restart
|
|
} else {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CART TITLE:"));
|
|
println_Msg(F(""));
|
|
println_Msg(arcgame);
|
|
display_Update();
|
|
#else
|
|
Serial.print(F("CART TITLE:"));
|
|
Serial.println(arcgame);
|
|
#endif
|
|
#if defined(enable_OLED)
|
|
buttonVal1 = (PIND & (1 << 7)); // PD7
|
|
#elif defined(enable_LCD)
|
|
buttonVal1 = (PING & (1 << 2)); //PG2
|
|
#endif
|
|
if (buttonVal1 == HIGH) { // Button Released
|
|
buttonreleased = 1;
|
|
break;
|
|
}
|
|
if (buttonreleased) {
|
|
buttonreleased = 0; // Reset Flag
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#if defined(enable_OLED)
|
|
buttonVal1 = (PIND & (1 << 7)); // PD7
|
|
#elif defined(enable_LCD)
|
|
buttonVal1 = (PING & (1 << 2)); //PG2
|
|
#endif
|
|
if (buttonVal1 == HIGH) // Button Released
|
|
break;
|
|
}
|
|
}
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display.setCursor(0, 56);
|
|
println_Msg(F("FAST CYCLE OFF"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F(""));
|
|
Serial.println(F("FAST CYCLE OFF"));
|
|
Serial.println(F("PRESS BUTTON TO STEP FORWARD"));
|
|
Serial.println(F("DOUBLE CLICK TO STEP BACK"));
|
|
Serial.println(F("HOLD TO SELECT"));
|
|
Serial.println(F(""));
|
|
#endif
|
|
while (readVals_ARC(arcgame, arcrr, arcll)) {
|
|
if (strcmp(arccsvEND, arcgame) == 0) {
|
|
arccsvFile.seek(0); // Restart
|
|
} else {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CART TITLE:"));
|
|
println_Msg(F(""));
|
|
println_Msg(arcgame);
|
|
display.setCursor(0, 48);
|
|
#if defined(enable_OLED)
|
|
print_STR(press_to_change_STR, 1);
|
|
print_STR(right_to_select_STR, 1);
|
|
#elif defined(enable_LCD)
|
|
print_STR(rotate_to_change_STR, 1);
|
|
print_STR(press_to_select_STR, 1);
|
|
#endif
|
|
display_Update();
|
|
#else
|
|
Serial.print(F("CART TITLE:"));
|
|
Serial.println(arcgame);
|
|
#endif
|
|
while (1) { // Single Step
|
|
int b = checkButton();
|
|
if (b == 1) { // Continue (press)
|
|
break;
|
|
}
|
|
if (b == 2) { // Reset to Start of List (doubleclick)
|
|
byte prevline = strtol(arcll, NULL, 10);
|
|
arccsvpos -= prevline;
|
|
arccsvFile.seek(arccsvpos);
|
|
break;
|
|
}
|
|
if (b == 3) { // Long Press - Select Cart (hold)
|
|
newarcsize = strtol(arcrr, NULL, 10);
|
|
EEPROM_writeAnything(8, newarcsize);
|
|
cartselected = 1; // SELECTION MADE
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
println_Msg(F("SELECTION MADE"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("SELECTION MADE"));
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
if (cartselected) {
|
|
cartselected = 0; // Reset Flag
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
println_Msg(F(""));
|
|
println_Msg(F("END OF FILE"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("END OF FILE"));
|
|
#endif
|
|
|
|
return false;
|
|
}
|
|
|
|
void checkCSV_ARC() {
|
|
if (getCartListInfo_ARC()) {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CART SELECTED"));
|
|
println_Msg(F(""));
|
|
println_Msg(arcgame);
|
|
display_Update();
|
|
// Display Settings
|
|
display.setCursor(0, 56);
|
|
print_Msg(F("CODE: R"));
|
|
println_Msg(newarcsize);
|
|
display_Update();
|
|
#else
|
|
Serial.println(F(""));
|
|
Serial.println(F("CART SELECTED"));
|
|
Serial.println(arcgame);
|
|
// Display Settings
|
|
Serial.print(F("CODE: R"));
|
|
Serial.println(newarcsize);
|
|
Serial.println(F(""));
|
|
#endif
|
|
} else {
|
|
#ifdef enable_OLED
|
|
display.setCursor(0, 56);
|
|
println_Msg(F("NO SELECTION"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("NO SELECTION"));
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void setCart_ARC() {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(arccartCSV);
|
|
display_Update();
|
|
#endif
|
|
sd.chdir();
|
|
sprintf(folder, "ARC/CSV");
|
|
sd.chdir(folder); // Switch Folder
|
|
arccsvFile = sd.open(arccartCSV, O_READ);
|
|
if (!arccsvFile) {
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
display_Clear();
|
|
println_Msg(F("CSV FILE NOT FOUND!"));
|
|
display_Update();
|
|
#else
|
|
Serial.println(F("CSV FILE NOT FOUND!"));
|
|
#endif
|
|
while (1) {
|
|
if (checkButton() != 0)
|
|
setup_ARC();
|
|
}
|
|
}
|
|
checkCSV_ARC();
|
|
|
|
arccsvFile.close();
|
|
}
|
|
#endif
|
|
//******************************************
|
|
// End of File
|
|
//******************************************
|