mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-28 14:01:52 +01:00
2cf7f5dbe7
The `setVoltage()` function should be called even when `ENABLE_VSELECT` is disabled because `ENABLE_3V3FIX` also uses it. There is no resource cost to do this as when both options are disabled the compiler will optimize this function out. This just "future proofs" the code so if that function ever does more it doesn't need updated everywhere. This applies to `setup_FlashVoltage()` as well. The changes to OSCR.cpp are just for code formatting and additional comments to clarify this.
263 lines
7.6 KiB
C++
263 lines
7.6 KiB
C++
/********************************************************************
|
|
* Open Source Cartridge Reader */
|
|
/*H******************************************************************
|
|
* FILENAME : OSCR.cpp
|
|
*
|
|
* DESCRIPTION :
|
|
* Contains various enums, variables, etc, for the main program.
|
|
*
|
|
* PUBLIC FUNCTIONS :
|
|
* void setClockScale( VOLTS )
|
|
*
|
|
* NOTES :
|
|
* This file is a WIP, I've been moving things into it on my local working
|
|
* copy, but they are not ready yet. Rather than put this in the main file
|
|
* only to move them back again, I decided to commit it early. If you need
|
|
* to add new globals, enums, defines, etc, please use this file!
|
|
*
|
|
* LICENSE :
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
* CHANGES :
|
|
*
|
|
* REF NO VERSION DATE WHO DETAIL
|
|
* 12.5 2023-03-29 Ancyker Initial version
|
|
*
|
|
*H*/
|
|
|
|
#include "OSCR.h"
|
|
|
|
/*==== VARIABLES ==================================================*/
|
|
|
|
// Firmware Version
|
|
char ver[5] = "12.6";
|
|
|
|
// Clock speed
|
|
unsigned long clock = CS_16MHZ;
|
|
|
|
// Voltage
|
|
VOLTS voltage = VOLTS_SET_5V;
|
|
|
|
/*==== /VARIABLES =================================================*/
|
|
|
|
/*F******************************************************************
|
|
* NAME : void printVersionToSerial()
|
|
*
|
|
* DESCRIPTION : Prints the version & feature string to serial
|
|
*
|
|
*F*/
|
|
#if !defined(enable_serial) && defined(ENABLE_UPDATER)
|
|
void printVersionToSerial() {
|
|
ClockedSerial.print(F("OSCR"));
|
|
ClockedSerial.print(F("::"));
|
|
ClockedSerial.print(ver);
|
|
ClockedSerial.print(F("//"));
|
|
#if defined(HW1)
|
|
ClockedSerial.print(F("HW1"));
|
|
#elif defined(HW2)
|
|
ClockedSerial.print(F("HW2"));
|
|
#elif defined(HW3)
|
|
ClockedSerial.print(F("HW3"));
|
|
#elif defined(HW4)
|
|
ClockedSerial.print(F("HW4"));
|
|
#elif defined(HW5)
|
|
ClockedSerial.print(F("HW5"));
|
|
#elif defined(SERIAL_MONITOR)
|
|
ClockedSerial.print(F("Serial"));
|
|
#else
|
|
ClockedSerial.print(F("HW?"));
|
|
#endif
|
|
#if defined (ENABLE_VSELECT)
|
|
ClockedSerial.print(F("|VSELECT"));
|
|
#endif
|
|
#if defined (clockgen_installed)
|
|
ClockedSerial.print(F("|CLOCKGEN"));
|
|
#endif
|
|
#if defined (fastcrc)
|
|
ClockedSerial.print(F("|FASTCRC"));
|
|
#endif
|
|
#if defined (ENABLE_3V3FIX)
|
|
ClockedSerial.print(F("|3V3FIX"));
|
|
#endif
|
|
|
|
ClockedSerial.println(F(""));
|
|
}
|
|
#else
|
|
void printVersionToSerial() {}
|
|
#endif
|
|
|
|
/*F******************************************************************
|
|
* NAME : void setClockScale( ClockScale )
|
|
*
|
|
* DESCRIPTION : Set ATMEGA2560 clock prescaler
|
|
*
|
|
* INPUTS :
|
|
* PARAMETERS:
|
|
* VOLTS ClockScale Clock scale
|
|
*
|
|
* PROCESS :
|
|
* [1] Enable clock prescaler change
|
|
* [2] Apply clock prescaler
|
|
*
|
|
* NOTES :
|
|
* Changing the clock prescaler to a value other than F_CPU (1 by default)
|
|
* can/will result in some clock-based functions not working, including
|
|
* timers and most communication protocols.
|
|
*
|
|
* FURTHER READING :
|
|
* ATmega640/V-1280/V-1281/V-2560/V-2561/V § 10.13.2 [PDF: https://rmy.pw/atmega2560]
|
|
*
|
|
*F*/
|
|
void setClockScale(VOLTS __x)
|
|
{
|
|
uint8_t __tmp = _BV(CLKPCE); /*[1]*/
|
|
__asm__ __volatile__ (
|
|
"in __tmp_reg__,__SREG__" "\n\t"
|
|
"cli" "\n\t"
|
|
"sts %1, %0" "\n\t"
|
|
"sts %1, %2" "\n\t"
|
|
"out __SREG__, __tmp_reg__"
|
|
: /* no outputs */
|
|
: "d" (__tmp),
|
|
"M" (_SFR_MEM_ADDR(CLKPR)),
|
|
"d" (__x)
|
|
: "r0"
|
|
); /*[2]*/
|
|
}
|
|
|
|
/*F******************************************************************
|
|
* NAME : VOLTS setVoltage( Voltage )
|
|
*
|
|
* DESCRIPTION : Adjust voltage (and clock prescaler, if enabled)
|
|
*
|
|
* INPUTS :
|
|
* PARAMETERS:
|
|
* VOLTS Voltage Voltage
|
|
*
|
|
* OUTPUTS :
|
|
* RETURN :
|
|
* Type: VOLTS Result:
|
|
* Values: VOLTS_SUCCESS Successfully set the voltage/clock
|
|
* VOLTS_ERROR Something went wrong
|
|
* VOLTS_NOTENABLED VSELECT and 3V3FIX are both disabled
|
|
*
|
|
* PROCESS :
|
|
* [1] Apply voltage
|
|
* [2] Apply clock prescaler
|
|
*
|
|
* NOTES :
|
|
* When changing to 5V the voltage is set first so that the MPU
|
|
* will be stable at 16MHz. When going down to 3.3V the clock
|
|
* is changed to 8MHz first so that the MPU will be stable when
|
|
* the voltage is changed to 3.3V.
|
|
*
|
|
* This works best with VSELECT as the firmware controls the
|
|
* timing of all of this. If you are doing this manually, then
|
|
* you'll need to start the OSCR with 5V set and only switch to
|
|
* 3.3V once on the main menu.
|
|
*
|
|
*F*/
|
|
#if defined(ENABLE_VSELECT) || defined(ENABLE_3V3FIX)
|
|
VOLTS setVoltage(VOLTS volts) {
|
|
switch(volts) {
|
|
/* 5V */
|
|
case VOLTS_SET_5V:
|
|
if (
|
|
#if defined(ENABLE_3V3FIX)
|
|
clock == CS_16MHZ
|
|
#endif
|
|
#if defined(ENABLE_VSELECT) && defined(ENABLE_3V3FIX)
|
|
&&
|
|
#endif
|
|
#if defined(ENABLE_VSELECT)
|
|
VOLTS_SET_5V == voltage
|
|
#endif
|
|
) return VOLTS_SUCCESS; // Just return if already as requested
|
|
|
|
// Adjust voltage high if VSELECT is available
|
|
#if defined(ENABLE_VSELECT)
|
|
PORTD &= ~(1 << 7); /*[1]*/
|
|
voltage = VOLTS_SET_5V;
|
|
#endif
|
|
|
|
// Adjust clock speed when 3V3FIX is enabled
|
|
#if defined(ENABLE_3V3FIX)
|
|
// Stop serial if running
|
|
#if !defined(enable_serial) && defined(ENABLE_UPDATER)
|
|
ClockedSerial.end();
|
|
#endif
|
|
// Set clock speed
|
|
clock = CS_16MHZ;
|
|
setClockScale(volts); /*[2]*/
|
|
// Restart serial
|
|
#if !defined(enable_serial) && defined(ENABLE_UPDATER)
|
|
ClockedSerial.begin(UPD_BAUD);
|
|
#endif
|
|
#else
|
|
clock = CS_16MHZ;
|
|
#endif
|
|
|
|
// Done
|
|
return VOLTS_SUCCESS;
|
|
|
|
/* 3.3V */
|
|
case VOLTS_SET_3V3:
|
|
if (
|
|
#if defined(ENABLE_3V3FIX)
|
|
clock == CS_8MHZ
|
|
#endif
|
|
#if defined(ENABLE_VSELECT) && defined(ENABLE_3V3FIX)
|
|
&&
|
|
#endif
|
|
#if defined(ENABLE_VSELECT)
|
|
VOLTS_SET_3V3 == voltage
|
|
#endif
|
|
) return VOLTS_SUCCESS; // Just return if already as requested
|
|
|
|
// Adjust clock speed when 3V3FIX is enabled
|
|
#if defined(ENABLE_3V3FIX)
|
|
#if !defined(enable_serial) && defined(ENABLE_UPDATER)
|
|
ClockedSerial.end();
|
|
#endif
|
|
// Set clock speed
|
|
clock = CS_8MHZ;
|
|
setClockScale(volts); /*[2]*/
|
|
#if !defined(enable_serial) && defined(ENABLE_UPDATER)
|
|
ClockedSerial.begin(UPD_BAUD);
|
|
#endif
|
|
#endif
|
|
|
|
// Adjust voltage high if VSELECT is available
|
|
#if defined(ENABLE_VSELECT)
|
|
PORTD |= (1 << 7); /*[1]*/
|
|
voltage = VOLTS_SET_3V3;
|
|
#endif
|
|
|
|
// Done
|
|
return VOLTS_SUCCESS;
|
|
|
|
/* ??? */
|
|
default:
|
|
return VOLTS_ERROR;
|
|
}
|
|
}
|
|
#else
|
|
// The compiler will optimize this out when this condition is met.
|
|
// Yes, even though it has a return value it will only be compiled
|
|
// if something reads that value. Currently nothing does.
|
|
VOLTS setVoltage(VOLTS volts __attribute__((unused))) {
|
|
return VOLTS_NOTENABLED;
|
|
}
|
|
#endif
|