Mirrors/cartreader
2
0
Fork 0
mirror of https://github.com/sanni/cartreader.git synced 2024-12-30 23:11:57 +01:00
Code Issues Projects Releases Wiki Activity
8d98a11e4a
cartreader/Cart_Reader/FLASH.ino

3273 lines
85 KiB
C++
Raw Blame History

//******************************************
// FLASHROM MODULE
// (also includes SNES repro functions)
//******************************************
#ifdef ENABLE_FLASH8
/******************************************
Variables
*****************************************/
// Flashrom
unsigned long flashSize;
byte flashromType;
byte secondID = 1;
unsigned long time;
unsigned long blank;
unsigned long sectorSize;
uint16_t bufferSize;
byte mapping = 0;
boolean byteCtrl = 0;
/******************************************
Menu
*****************************************/
// General Flash menu items
static const char flashMenuItemBlankcheck[] PROGMEM = "Blankcheck";
static const char flashMenuItemID[] PROGMEM = "ID";
static const char flashMenuItemRead[] PROGMEM = "Read";
static const char flashMenuItemWrite[] PROGMEM = "Write";
static const char flashMenuItemErase[] PROGMEM = "Erase";
static const char flashMenuItemPrint[] PROGMEM = "Print";
// 8bit Flash menu items
static const char* const menuOptionsFLASH8[] PROGMEM = { flashMenuItemBlankcheck, flashMenuItemErase, flashMenuItemRead, flashMenuItemWrite, flashMenuItemID, flashMenuItemPrint, FSTRING_RESET };
#ifndef ENABLE_FLASH16
// Flash mode menu
static const char modeMenuItem1[] PROGMEM = "CFI Mode";
static const char modeMenuItem2[] PROGMEM = "Standard Mode";
static const char modeMenuItem3[] PROGMEM = "PLCC32 to SNES";
static const char* const menuOptionsMode[] PROGMEM = { modeMenuItem1, modeMenuItem2, modeMenuItem3, FSTRING_RESET };
#endif
// Misc flash strings
const char PROGMEM ATTENTION_3_3V[] = "ATTENTION 3.3V";
#ifdef ENABLE_FLASH16
// Flash start menu
static const char flashMenuItem1[] PROGMEM = "CFI";
static const char flashMenuItem2[] PROGMEM = "8bit Flash";
static const char flashMenuItem3[] PROGMEM = "PLCC32 to SNES";
static const char flashMenuItem4[] PROGMEM = "Eprom";
static const char flashMenuItem5[] PROGMEM = "16bit Flash";
static const char* const menuOptionsFlash[] PROGMEM = { flashMenuItem1, flashMenuItem2, flashMenuItem3, flashMenuItem4, flashMenuItem5, FSTRING_RESET };
// 16bit Flash menu items
static const char* const menuOptionsFLASH16[] PROGMEM = { flashMenuItemBlankcheck, flashMenuItemErase, flashMenuItemRead, flashMenuItemWrite, flashMenuItemID, flashMenuItemPrint, FSTRING_RESET };
// Eprom menu items
static const char epromMenuItem4[] PROGMEM = "Verify";
static const char* const menuOptionsEprom[] PROGMEM = { flashMenuItemBlankcheck, flashMenuItemRead, flashMenuItemWrite, epromMenuItem4, flashMenuItemPrint, FSTRING_RESET };
void flashMenu() {
display_Clear();
display_Update();
mapping = 0;
// create menu with title and 6 options to choose from
unsigned char flashSlot;
// Copy menuOptions out of progmem
convertPgm(menuOptionsFlash, 6);
flashSlot = question_box(F("Select Mode"), menuOptions, 6, 0);
// wait for user choice to come back from the question box menu
switch (flashSlot) {
case 0:
setupCFI();
flashSize = 8388608;
writeCFI_Flash(1, 1, 0);
verifyFlash();
print_STR(press_button_STR, 0);
display_Update();
wait();
resetArduino();
break;
case 1:
setup_Flash8();
id_Flash8();
wait();
mode = CORE_FLASH8;
break;
case 2:
mapping = 3;
setup_Flash8();
id_Flash8();
wait();
mode = CORE_FLASH8;
break;
case 3:
setup_Eprom();
mode = CORE_EPROM;
break;
case 4:
setup_Flash16();
id_Flash16();
wait();
mode = CORE_FLASH16;
break;
case 5:
resetArduino();
break;
default:
print_MissingModule(); // does not return
}
}
#else
void flashMenu() {
display_Clear();
display_Update();
mapping = 0;
// create menu with title and 4 options to choose from
unsigned char flashMode;
// Copy menuOptions out of progmem
convertPgm(menuOptionsMode, 4);
flashMode = question_box(F("Select Flash Mode"), menuOptions, 4, 0);
// wait for user choice to come back from the question box menu
switch (flashMode) {
case 0:
setupCFI();
flashSize = 8388608;
writeCFI_Flash(1, 1, 0);
verifyFlash();
print_STR(press_button_STR, 0);
display_Update();
wait();
resetArduino();
break;
case 1:
setup_Flash8();
id_Flash8();
wait();
mode = CORE_FLASH8;
break;
case 2:
mapping = 3;
setup_Flash8();
id_Flash8();
wait();
mode = CORE_FLASH8;
break;
case 3:
resetArduino();
break;
default:
print_MissingModule(); // does not return
}
}
#endif
void setupCFI() {
display_Clear();
display_Update();
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Select file"));
display_Clear();
setup_Flash8();
identifyCFI_Flash();
sprintf(filePath, "%s/%s", filePath, fileName);
display_Clear();
}
void readOnlyMode() {
display_Clear();
println_Msg(FS(FSTRING_EMPTY));
println_Msg(FS(FSTRING_EMPTY));
println_Msg(F("Read-only Mode!"));
println_Msg(FS(FSTRING_EMPTY));
println_Msg(FS(FSTRING_EMPTY));
display_Update();
}
void flashromMenu8() {
// create menu with title and 7 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsFLASH8, 7);
mainMenu = question_box(F("Flashrom Writer 8"), menuOptions, 7, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu) {
case 0:
display_Clear();
println_Msg(F("Blankcheck"));
display_Update();
time = millis();
resetFlash8();
blankcheck_Flash();
break;
case 1:
if (flashromType != 0) {
display_Clear();
println_Msg(F("Warning: This will erase"));
println_Msg(F("your flashrom/repro"));
print_STR(press_button_STR, 1);
display_Update();
wait();
rgbLed(black_color);
println_Msg(FS(FSTRING_EMPTY));
println_Msg(F("Please wait..."));
display_Update();
time = millis();
switch (flashromType) {
case 1: eraseFlash29F032(); break;
case 2: eraseFlash29F1610(); break;
case 3: eraseFlash28FXXX(); break;
}
println_Msg(F("Flashrom erased"));
display_Update();
resetFlash8();
} else {
readOnlyMode();
}
break;
case 2:
time = millis();
resetFlash8();
readFlash();
break;
case 3:
if (flashromType != 0) {
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(FS(FSTRING_SELECT_FILE));
display_Clear();
time = millis();
switch (flashromType) {
case 1:
writeFlash29F032();
break;
case 2:
if (flashid == 0xC2F3)
writeFlash29F1601();
else if ((flashid == 0xC2F1) || (flashid == 0xC2F9))
writeFlash29F1610();
else if ((flashid == 0xC2C4) || (flashid == 0xC249) || (flashid == 0xC2A7) || (flashid == 0xC2A8) || (flashid == 0xC2C9) || (flashid == 0xC2CB) || (flashid == 0x0149) || (flashid == 0x01C4) || (flashid == 0x01F9) || (flashid == 0x01F6) || (flashid == 0x01D7))
writeFlash29LV640();
else if (flashid == 0x017E)
writeFlash29GL(sectorSize, bufferSize);
else if ((flashid == 0x0458) || (flashid == 0x0158) || (flashid == 0x01AB) || (flashid == 0x0422) || (flashid == 0x0423))
writeFlash29F800();
else if (flashid == 0x0) // Manual flash config, pick most common type
writeFlash29LV640();
break;
case 3:
writeFlash28FXXX();
break;
}
delay(100);
// Reset twice just to be sure
resetFlash8();
resetFlash8();
verifyFlash();
} else {
readOnlyMode();
}
break;
case 4:
time = 0;
display_Clear();
resetFlash8();
println_Msg(F("ID Flashrom"));
switch (flashromType) {
case 0: break;
case 1: idFlash29F032(); break;
case 2: idFlash29F1610(); break;
case 3: idFlash28FXXX(); break;
}
println_Msg(FS(FSTRING_EMPTY));
printFlash(40);
println_Msg(FS(FSTRING_EMPTY));
display_Update();
resetFlash8();
break;
case 5:
time = 0;
display_Clear();
println_Msg(F("Print first 70Bytes"));
display_Update();
resetFlash8();
printFlash(70);
break;
case 6:
time = 0;
display_Clear();
display_Update();
resetFlash8();
resetArduino();
break;
}
if (time != 0) {
print_Msg(F("Operation took : "));
print_Msg((millis() - time) / 1000, DEC);
println_Msg(F("s"));
display_Update();
}
// Prints string out of the common strings array either with or without newline
print_STR(press_button_STR, 0);
display_Update();
wait();
}
#ifdef ENABLE_FLASH16
void flashromMenu16() {
// create menu with title "Flashrom Writer 16" and 7 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsFLASH16, 7);
mainMenu = question_box(F("Flashrom Writer 16"), menuOptions, 7, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu) {
case 0:
display_Clear();
println_Msg(F("Blankcheck"));
display_Update();
time = millis();
resetFlash16();
blankcheck16();
break;
case 1:
display_Clear();
println_Msg(F("Erase Flashrom"));
display_Update();
time = millis();
resetFlash16();
eraseFlash16();
println_Msg(F("Flashrom erased."));
display_Update();
break;
case 2:
display_Clear();
time = millis();
resetFlash16();
readFlash16();
break;
case 3:
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(FS(FSTRING_SELECT_FILE));
display_Clear();
time = millis();
if (flashid == 0xC2F3) {
writeFlash16_29F1601();
} else if ((flashid == 0xC2C4) || (flashid == 0xC249) || (flashid == 0xC2A7) || (flashid == 0xC2A8) || (flashid == 0xC2C9) || (flashid == 0xC2CB) || (flashid == 0x0149) || (flashid == 0x01C4) || (flashid == 0x01F9) || (flashid == 0x01F6) || (flashid == 0x01D7) || (flashid == 0xC2FC)) {
writeFlash16_29LV640();
} else {
writeFlash16();
}
delay(100);
resetFlash16();
delay(100);
verifyFlash16();
break;
case 4:
time = 0;
display_Clear();
println_Msg(F("ID Flashrom"));
idFlash16();
println_Msg(FS(FSTRING_EMPTY));
printFlash16(40);
println_Msg(FS(FSTRING_EMPTY));
display_Update();
resetFlash16();
break;
case 5:
time = 0;
display_Clear();
println_Msg(F("Print first 70Bytes"));
display_Update();
resetFlash16();
printFlash16(70);
break;
case 6:
time = 0;
display_Clear();
display_Update();
resetFlash16();
resetArduino();
break;
}
if (time != 0) {
print_Msg(F("Operation took: "));
print_Msg((millis() - time) / 1000, DEC);
println_Msg(F("s"));
display_Update();
}
wait();
}
void epromMenu() {
// create menu with title "Eprom Writer" and 4 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsEprom, 6);
mainMenu = question_box(F("Eprom Writer"), menuOptions, 6, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu) {
case 0:
display_Clear();
println_Msg(F("Blankcheck"));
display_Update();
time = millis();
blankcheck_Eprom();
break;
case 1:
display_Clear();
time = millis();
read_Eprom();
break;
case 2:
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(FS(FSTRING_SELECT_FILE));
display_Clear();
time = millis();
write_Eprom();
delay(1000);
verify_Eprom();
break;
case 3:
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Verify against"));
sprintf(filePath, "%s/%s", filePath, fileName);
display_Clear();
time = millis();
verify_Eprom();
break;
case 4:
display_Clear();
time = millis();
print_Eprom(80);
break;
case 5:
time = 0;
display_Clear();
display_Update();
resetArduino();
break;
}
if (time != 0) {
print_Msg(F("Operation took: "));
print_Msg((millis() - time) / 1000, DEC);
println_Msg(F("s"));
display_Update();
}
wait();
}
#endif
/******************************************
Flash ID
*****************************************/
void printFlashSize(int index) {
display_Clear();
print_Msg(F("Flashsize: "));
print_Msg(index);
println_Msg(F("MB"));
}
void printFlashType(int index) {
display_Clear();
print_Msg(F("Flashtype: "));
println_Msg(index);
}
byte selectFlashtype(boolean option) {
byte selectionByte;
if (option)
selectionByte = navigateMenu(0, 3, &printFlashType);
else
selectionByte = navigateMenu(1, 8, &printFlashSize);
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
display.setCursor(0, 56); // Display selection at bottom
#endif
if (option) {
print_Msg(F("Flash Type: "));
println_Msg(selectionByte);
} else {
print_Msg(F("Flash Size: "));
print_Msg(selectionByte);
println_Msg(F("MB"));
}
display_Update();
delay(200);
return selectionByte;
}
void id_Flash8() {
// Test if 28FXXX series flash (type 3 flashrom)
idFlash28FXXX();
// Print start screen
idtheflash:
display_Clear();
display_Update();
println_Msg(F("Flashrom Writer 8bit"));
println_Msg("");
println_Msg("");
print_Msg(F("Flash ID: "));
println_Msg(flashid_str);
if (flashid == 0xC2F1) {
println_Msg(F("MX29F1610 detected"));
flashSize = 2097152;
flashromType = 2;
} else if (flashid == 0xC2F3) {
println_Msg(F("MX29F1601 detected"));
flashSize = 2097152;
flashromType = 2;
} else if (flashid == 0xC2F9) {
println_Msg(F("MX29L3211 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 4194304;
flashromType = 2;
} else if ((flashid == 0xC2C4) || (flashid == 0xC249)) {
println_Msg(F("MX29LV160 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 2097152;
flashromType = 2;
} else if ((flashid == 0xC2A7) || (flashid == 0xC2A8)) {
println_Msg(F("MX29LV320 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 4194304;
flashromType = 2;
} else if ((flashid == 0xC2C9) || (flashid == 0xC2CB)) {
println_Msg(F("MX29LV640 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 8388608;
flashromType = 2;
} else if ((flashid == 0x0149) || (flashid == 0x01C4)) {
println_Msg(F("AM29LV160 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 2097152;
flashromType = 2;
} else if ((flashid == 0x01F9) || (flashid == 0x01F6)) {
println_Msg(F("AM29LV320 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 4194304;
flashromType = 2;
} else if (flashid == 0x01D7) {
println_Msg(F("AM29LV640 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 8388608;
flashromType = 2;
} else if (flashid == 0x0141) {
println_Msg(F("AM29F032B detected"));
flashSize = 4194304;
flashromType = 1;
} else if (flashid == 0x01AD) {
println_Msg(F("AM29F016B detected"));
flashSize = 2097152;
flashromType = 1;
} else if (flashid == 0x20AD) {
println_Msg(F("AM29F016D detected"));
flashSize = 2097152;
flashromType = 1;
} else if (flashid == 0x04AD) {
println_Msg(F("MBM29F016A detected"));
flashSize = 2097152;
flashromType = 1;
} else if (flashid == 0x04D4) {
println_Msg(F("MBM29F033C detected"));
flashSize = 4194304;
flashromType = 1;
} else if (flashid == 0x04D5) {
println_Msg(F("MBM29F080C detected"));
flashSize = 1048576;
flashromType = 1;
} else if (flashid == 0x0458) {
println_Msg(F("MBM29F800BA detected"));
flashSize = 1048576;
flashromType = 2;
} else if (flashid == 0x01AB) {
println_Msg(F("AM29F400AB detected"));
flashSize = 131072 * 4;
flashromType = 2;
} else if (flashid == 0x0423) {
println_Msg(F("MBM29F400TC detected"));
flashSize = 131072 * 4;
flashromType = 2;
} else if (flashid == 0x0422) {
println_Msg(F("MBM29F400BC detected"));
flashSize = 131072 * 4;
flashromType = 2;
} else if (flashid == 0x0158) {
println_Msg(F("AM29F800BB detected"));
flashSize = 1048576;
flashromType = 2;
} else if (flashid == 0x01A3) {
println_Msg(F("AM29LV033C detected"));
flashSize = 131072 * 32;
flashromType = 1;
} else if (flashid == 0x017E) {
// S29GL032M
if (readByte_Flash(28) == 0x1A) {
println_Msg(F("S29GL032M detected"));
flashSize = 4194304;
sectorSize = 65536;
bufferSize = 32;
}
// S29GL064M
else if (readByte_Flash(28) == 0x10) {
println_Msg(F("S29GL064M detected"));
flashSize = 8388608;
sectorSize = 65536;
bufferSize = 32;
}
// Unknown S29GL type
else {
println_Msg(F("Unknown S29GL Type"));
flashSize = 8388608;
sectorSize = 65536;
bufferSize = 32;
}
println_Msg(FS(ATTENTION_3_3V));
flashromType = 2;
} else if (flashid == 0xB088) {
// LH28F016SUT
println_Msg(F("LH28F016SUT detected"));
println_Msg(F("ATTENTION 3/5 setting"));
flashSize = 2097152;
sectorSize = 65536;
bufferSize = 256;
flashromType = 3;
} else if ((flashid == 0x8916) || (flashid == 0x8917) || (flashid == 0x8918)) {
// E28FXXXJ3A
print_Msg(F("E28F"));
switch (flashid & 0x00f0) {
case 0x60:
flashSize = 131072 * 32;
print_Msg(F("320"));
break;
case 0x70:
flashSize = 131072 * 64;
print_Msg(F("640"));
break;
case 0x80:
flashSize = 131072 * 128;
print_Msg(F("128"));
break;
}
println_Msg(F("J3A detected"));
sectorSize = 131072;
bufferSize = 32;
flashromType = 3;
} else if (flashid == 0xBFB7) {
println_Msg(F("39F040 detected"));
flashSize = 524288;
flashromType = 1;
} else if (flashid == 0xBFB6) {
println_Msg(F("39F020 detected"));
flashSize = 262144;
flashromType = 1;
} else if (flashid == 0xBFB5) {
println_Msg(F("39F010 detected"));
flashSize = 131072;
flashromType = 1;
} else if (secondID == 1) {
// Read ID a second time using a different command (type 1 flashrom)
resetFlash8();
idFlash29F032();
secondID = 2;
goto idtheflash;
} else if (secondID == 2) {
// Backup first ID read-out
strncpy(vendorID, flashid_str, 5);
// Read ID a third time using a different command (type 2 flashrom)
resetFlash8();
idFlash29F1610();
secondID = 3;
goto idtheflash;
} else if (secondID == 3) {
idFlash39SF040();
secondID = 0;
goto idtheflash;
} else {
// ID not found
display_Clear();
println_Msg(F("Flashrom Writer 8bit"));
println_Msg("");
print_Msg(F("ID Type 1: "));
println_Msg(vendorID);
print_Msg(F("ID Type 2: "));
println_Msg(flashid_str);
println_Msg("");
println_Msg(F("UNKNOWN FLASHROM"));
println_Msg("");
// Prints string out of the common strings array either with or without newline
print_Error(press_button_STR);
display_Update();
wait();
// Select flashrom config manually
flashSize = selectFlashtype(0) * 1024UL * 1024UL;
flashromType = selectFlashtype(1);
flashid = 0;
sprintf(flashid_str, "%04X", 0);
// print first 40 bytes of flash
display_Clear();
println_Msg(F("First 40 bytes:"));
println_Msg(FS(FSTRING_EMPTY));
printFlash(40);
resetFlash8();
}
println_Msg(FS(FSTRING_EMPTY));
// Prints string out of the common strings array either with or without newline
print_STR(press_button_STR, 1);
display_Update();
resetFlash8();
}
#ifdef ENABLE_FLASH16
void id_Flash16() {
// ID flash
idFlash16();
resetFlash16();
display_Clear();
display_Update();
println_Msg(F("Flashrom Writer 16bit"));
println_Msg("");
print_Msg(F("Flash ID: "));
println_Msg(flashid_str);
if (flashid == 0xC2F1) {
println_Msg(F("MX29F1610 detected"));
println_Msg("");
flashSize = 2097152;
flashromType = 2;
} else if (flashid == 0xC2F3) {
println_Msg(F("MX29F1601 detected"));
flashSize = 2097152;
flashromType = 2;
} else if (flashid == 0xC2F9) {
println_Msg(F("MX29L3211 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 4194304;
flashromType = 2;
} else if ((flashid == 0xC2C4) || (flashid == 0xC249)) {
println_Msg(F("MX29LV160 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 2097152;
flashromType = 2;
} else if ((flashid == 0xC2A7) || (flashid == 0xC2A8)) {
println_Msg(F("MX29LV320 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 4194304;
flashromType = 2;
} else if ((flashid == 0xC2C9) || (flashid == 0xC2CB)) {
println_Msg(F("MX29LV640 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 8388608;
flashromType = 2;
} else if ((flashid == 0x0149) || (flashid == 0x01C4)) {
println_Msg(F("AM29LV160 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 2097152;
flashromType = 2;
} else if ((flashid == 0x01F9) || (flashid == 0x01F6)) {
println_Msg(F("AM29LV320 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 4194304;
flashromType = 2;
} else if (flashid == 0x01D7) {
println_Msg(F("AM29LV640 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 8388608;
flashromType = 2;
} else if (flashid == 0xC2FC) {
println_Msg(F("MX26L6420 detected"));
println_Msg(FS(ATTENTION_3_3V));
flashSize = 8388608;
flashromType = 2;
} else {
print_FatalError(F("Unknown flashrom"));
println_Msg("");
}
println_Msg("");
// Prints string out of the common strings array either with or without newline
print_STR(press_button_STR, 1);
display_Update();
}
#endif
/******************************************
Setup
*****************************************/
#if defined(ENABLE_VSELECT) || defined(ENABLE_3V3FIX)
static const char flashvoltItem1[] PROGMEM = "3.3V";
static const char flashvoltItem2[] PROGMEM = "5V";
static const char* const flashvoltOptions[] PROGMEM = { flashvoltItem1, flashvoltItem2, FSTRING_RESET };
void setup_FlashVoltage() {
// create menu with title and 3 options to choose from
unsigned char flashvolt;
// Copy menuOptions out of progmem
convertPgm(flashvoltOptions, 3);
flashvolt = question_box(F("Select Flash Voltage"), menuOptions, 3, 0);
// wait for user choice to come back from the question box menu
switch (flashvolt) {
case 0:
// Request 3.3V
setVoltage(VOLTS_SET_3V3);
break;
case 1:
// Request 5V
setVoltage(VOLTS_SET_5V);
break;
case 2:
resetArduino();
break;
}
}
#else
// The compiler will optimize this out when this condition is met.
void setup_FlashVoltage() {}
#endif
void setup_Flash8() {
// Set Address Pins to Output
//A0-A7
DDRF = 0xFF;
//A8-A15
DDRK = 0xFF;
//A16-A23
DDRL = 0xFF;
// Set Control Pins to Output RST(PH0) OE(PH1) OE_SNS(PH3) WE(PH4) WE_SNS(PH5) CE(PH6)
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
// Setting RST(PH0) OE(PH1) OE_SNS(PH3) WE(PH4) WE_SNS(PH5) HIGH
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5);
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Set Data Pins (D0-D7) to Input
DDRC = 0x00;
// Disable Internal Pullups
PORTC = 0x00;
}
#ifdef ENABLE_FLASH16
void setup_Flash16() {
// Set Address Pins to Output
//A0-A7
DDRF = 0xFF;
//A8-A15
DDRK = 0xFF;
//A16-A23
DDRL = 0xFF;
// Set Control Pins to Output RST(PH0) OE(PH1) BYTE(PH3) WE(PH4) WP(PH5) CE(PH6)
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
// Set Data Pins (D0-D15) to Input
DDRC = 0x00;
DDRA = 0x00;
// Disable Internal Pullups
PORTC = 0x00;
PORTA = 0x00;
// Setting RST(PH0) OE(PH1) BYTE(PH3) WE(PH4) WP(PH5) HIGH
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5);
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
delay(100);
}
void setup_Eprom() {
// Set Address Pins to Output
//A0-A7
DDRF = 0xFF;
//A8-A15
DDRK = 0xFF;
//A16-A23
DDRL = 0xFF;
// Set Data Pins (D0-D15) to Input
DDRC = 0x00;
DDRA = 0x00;
// Disable Internal Pullups
PORTC = 0x00;
PORTA = 0x00;
// Set Control Pins to Output VPP/OE(PH5) CE(PH6)
DDRH |= (1 << 5) | (1 << 6);
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
// Setting VPP/OE(PH5) LOW
PORTH &= ~(1 << 5);
// 27C322 is a 4MB eprom
flashSize = 4194304;
}
#endif
/******************************************
I/O Functions
*****************************************/
// Switch data pins to read
void dataIn8() {
// Set to Input
DDRC = 0x00;
}
#ifdef ENABLE_FLASH16
// Switch data pins to write
void dataOut16() {
DDRC = 0xFF;
DDRA = 0xFF;
}
// Switch data pins to read
void dataIn16() {
DDRC = 0x00;
DDRA = 0x00;
}
#endif
/******************************************
Low level functions
*****************************************/
void writeByte_Flash(unsigned long myAddress, byte myData) {
// A0-A7
PORTF = myAddress & 0xFF;
// flash adapter (without SRAM save chip)
if (mapping == 0) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A23
PORTL = (myAddress >> 16) & 0xFF;
}
/* SNES maskrom flash adapter combined with PLCC32 adapter
SNES A19 -> 32PLCC A17
SNES A18 -> 32PLCC A16
SNES A17 -> 32PLCC A18
SNES A16 -> 32PLCC OE
SNES CS/Flash OE -> 32PLCC WE
*/
else if (mapping == 3) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16
if (!(((myAddress >> 16) & 0xFF) & 0x1)) {
PORTL &= ~(1 << 2);
} else if (((myAddress >> 16) & 0xFF) & 0x1) {
PORTL |= (1 << 2);
}
// A17
if (!(((myAddress >> 16) & 0xFF) & 0x2)) {
PORTL &= ~(1 << 3);
} else if (((myAddress >> 16) & 0xFF) & 0x2) {
PORTL |= (1 << 3);
}
// A18
if (!(((myAddress >> 16) & 0xFF) & 0x4)) {
PORTL &= ~(1 << 1);
} else if (((myAddress >> 16) & 0xFF) & 0x4) {
PORTL |= (1 << 1);
}
// Switch PLCC32 OE to HIGH to disable output
PORTL |= (1 << 0);
}
// SNES LoRom
else if (mapping == 1) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
}
// SNES HiRom
else if (mapping == 2) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A23
PORTL = (myAddress >> 16) & 0xFF;
// Set PL7 to value of PL6
if (!(((myAddress >> 16) & 0xFF) & 0x40)) {
// if PL6 is 0 set PL7 to 0
PORTL &= ~(1 << 7);
} else if (((myAddress >> 16) & 0xFF) & 0x40) {
// if PL6 is 1 set PL7 to 1
PORTL |= (1 << 7);
}
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// for SNES LoRom repro with 2x 2MB
else if (mapping == 122) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
// Flip BA6(PL6) to address second rom chip
PORTL ^= (1 << 6);
}
// for SNES HiRom repro with 2x 2MB
else if (mapping == 222) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A23
PORTL = (myAddress >> 16) & 0xFF;
// Flip BA5(PL5) to address second rom chip
PORTL ^= (1 << 5);
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// for SNES ExLoRom repro with 2x 4MB
else if (mapping == 124) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
// Flip A22(PL7) to reverse P0 and P1 roms
PORTL ^= (1 << 7);
}
// for SNES ExHiRom repro with 2x 4MB
else if (mapping == 224) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A22
PORTL = (myAddress >> 16) & 0xFF;
// Set PL7 to inverse of PL6 to reverse P0 and P1 roms
if (!(((myAddress >> 16) & 0xFF) & 0x40)) {
// if PL6 is 0 set PL7 to 1
PORTL |= (1 << 7);
} else if (((myAddress >> 16) & 0xFF) & 0x40) {
// if PL6 is 1 set PL7 to 0
PORTL &= ~(1 << 7);
}
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// for SNES ExLoRom repro with 4x 2MB
else if (mapping == 142) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
// Flip BA6(PL6) to address second rom chip
PORTL ^= (1 << 6);
// Flip A22(PL7) to reverse P0 and P1 roms
PORTL ^= (1 << 7);
}
// for SNES ExHiRom repro with 4x 2MB
else if (mapping == 242) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A22
PORTL = (myAddress >> 16) & 0xFF;
// Flip BA5(PL5) to address second rom chip
PORTL ^= (1 << 5);
// Set PL7 to inverse of PL6 to reverse P0 and P1 roms
if (!(((myAddress >> 16) & 0xFF) & 0x40)) {
// if PL6 is 0 set PL7 to 1
PORTL |= (1 << 7);
} else if (((myAddress >> 16) & 0xFF) & 0x40) {
// if PL6 is 1 set PL7 to 0
PORTL &= ~(1 << 7);
}
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// Data
PORTC = myData;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
if (mapping == 3)
// Switch PLCC32 WE to LOW
PORTH &= ~(1 << 3);
else
// Switch WE(PH4) WE_SNS(PH5) to LOW
PORTH &= ~((1 << 4) | (1 << 5));
// Leave WE low for at least 60ns
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
if (mapping == 3)
// Switch PLCC32 WE to HIGH
PORTH |= (1 << 3);
else
// Switch WE(PH4) WE_SNS(PH5) to HIGH
PORTH |= (1 << 4) | (1 << 5);
// Leave WE high for at least 50ns
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
}
byte readByte_Flash(unsigned long myAddress) {
// A0-A7
PORTF = myAddress & 0xFF;
// flash adapter (without SRAM save chip)
if (mapping == 0) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A23
PORTL = (myAddress >> 16) & 0xFF;
}
/* SNES maskrom flash adapter combined with PLCC32 adapter
SNES A19 -> 32PLCC A17
SNES A18 -> 32PLCC A16
SNES A17 -> 32PLCC A18
SNES A16 -> 32PLCC OE
SNES CS/Flash OE -> 32PLCC WE
*/
else if (mapping == 3) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16
if (!(((myAddress >> 16) & 0xFF) & 0x1)) {
PORTL &= ~(1 << 2);
} else if (((myAddress >> 16) & 0xFF) & 0x1) {
PORTL |= (1 << 2);
}
// A17
if (!(((myAddress >> 16) & 0xFF) & 0x2)) {
PORTL &= ~(1 << 3);
} else if (((myAddress >> 16) & 0xFF) & 0x2) {
PORTL |= (1 << 3);
}
// A18
if (!(((myAddress >> 16) & 0xFF) & 0x4)) {
PORTL &= ~(1 << 1);
} else if (((myAddress >> 16) & 0xFF) & 0x4) {
PORTL |= (1 << 1);
}
// Switch PLCC32 WE to HIGH to disable writing
PORTH |= (1 << 3);
}
// SNES LoRom
else if (mapping == 1) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
}
// SNES HiRom
else if (mapping == 2) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A23
PORTL = (myAddress >> 16) & 0xFF;
// Set PL7 to value of PL6
if (!(((myAddress >> 16) & 0xFF) & 0x40)) {
// if PL6 is 0 set PL7 to 0
PORTL &= ~(1 << 7);
} else if (((myAddress >> 16) & 0xFF) & 0x40) {
// if PL6 is 1 set PL7 to 1
PORTL |= (1 << 7);
}
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// for SNES LoRom repro with 2x 2MB
else if (mapping == 122) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
// Flip BA6(PL6) to address second rom chip
PORTL ^= (1 << 6);
}
// for SNES HiRom repro with 2x 2MB
else if (mapping == 222) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A23
PORTL = (myAddress >> 16) & 0xFF;
// Flip BA5(PL5) to address second rom chip
PORTL ^= (1 << 5);
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// for SNES ExLoRom repro with 2x 4MB
else if (mapping == 124) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
// Flip A22(PL7) to reverse P0 and P1 roms
PORTL ^= (1 << 7);
}
// for SNES ExHiRom repro with 2x 4MB
else if (mapping == 224) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A22
PORTL = (myAddress >> 16) & 0xFF;
// Set PL7 to inverse of PL6 to reverse P0 and P1 roms
if (!(((myAddress >> 16) & 0xFF) & 0x40)) {
// if PL6 is 0 set PL7 to 1
PORTL |= (1 << 7);
} else if (((myAddress >> 16) & 0xFF) & 0x40) {
// if PL6 is 1 set PL7 to 0
PORTL &= ~(1 << 7);
}
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// for SNES ExLoRom repro with 4x 2MB
else if (mapping == 142) {
// A8-A14
PORTK = (myAddress >> 8) & 0x7F;
// Set SNES A15(PK7) HIGH to disable SRAM
PORTK |= (1 << 7);
// A15-A22
PORTL = (myAddress >> 15) & 0xFF;
// Flip BA6(PL6) to address second rom chip
PORTL ^= (1 << 6);
// Flip A22(PL7) to reverse P0 and P1 roms
PORTL ^= (1 << 7);
}
// for SNES ExHiRom repro with 4x 2MB
else if (mapping == 242) {
// A8-A15
PORTK = (myAddress >> 8) & 0xFF;
// A16-A22
PORTL = (myAddress >> 16) & 0xFF;
// Flip BA5(PL5) to address second rom chip
PORTL ^= (1 << 5);
// Set PL7 to inverse of PL6 to reverse P0 and P1 roms
if (!(((myAddress >> 16) & 0xFF) & 0x40)) {
// if PL6 is 0 set PL7 to 1
PORTL |= (1 << 7);
} else if (((myAddress >> 16) & 0xFF) & 0x40) {
// if PL6 is 1 set PL7 to 0
PORTL &= ~(1 << 7);
}
// Switch SNES BA6(PL6) to HIGH to disable SRAM
PORTL |= (1 << 6);
}
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
if (byteCtrl) {
// Setting OE(PH1) LOW
PORTH &= ~(1 << 1);
} else if (mapping == 3) {
// Switch PLCC32 OE to LOW
PORTL &= ~(1 << 0);
} else {
// Setting OE(PH1) OE_SNS(PH3) LOW
PORTH &= ~((1 << 1) | (1 << 3));
}
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
// Read
byte tempByte = PINC;
if (byteCtrl) {
// Setting OE(PH1) HIGH
PORTH |= (1 << 1);
} else if (mapping == 3) {
// Switch PLCC32 OE to HIGH
PORTL |= (1 << 0);
} else {
// Setting OE(PH1) OE_SNS(PH3) HIGH
PORTH |= (1 << 1) | (1 << 3);
}
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
return tempByte;
}
void writeWord_Flash(unsigned long myAddress, word myData) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t");
// Switch WE(PH4) to LOW
PORTH &= ~(1 << 4);
// Leave WE low for at least 60ns
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
// Switch WE(PH4) to HIGH
PORTH |= (1 << 4);
// Leave WE high for at least 50ns
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
}
word readWord_Flash(unsigned long myAddress) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t");
// Setting OE(PH1) LOW
PORTH &= ~(1 << 1);
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
// Read
word tempWord = ((PINA & 0xFF) << 8) | (PINC & 0xFF);
__asm__("nop\n\t");
// Setting OE(PH1) HIGH
PORTH |= (1 << 1);
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
return tempWord;
}
/******************************************
write helper functions
*****************************************/
bool openFileOnSD() {
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize) {
display_Clear();
println_Msg(filePath);
println_Msg(FS(FSTRING_EMPTY));
print_Msg(F("File:"));
print_Msg(FS(FSTRING_SPACE));
print_Msg(FS(FSTRING_SPACE));
print_Msg(FS(FSTRING_SPACE));
print_Msg(FS(FSTRING_SPACE));
print_Msg(fileSize);
print_STR(_bytes_STR, 1);
print_Msg(F("Flash:"));
print_Msg(FS(FSTRING_SPACE));
print_Msg(flashSize);
print_STR(_bytes_STR, 1);
print_FatalError(file_too_big_STR);
}
return true;
}
print_STR(open_file_STR, 1);
display_Update();
return false;
}
bool openFlashFile() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
print_STR(flashing_file_STR, 0);
print_Msg(filePath);
println_Msg(F("..."));
display_Update();
return openFileOnSD();
}
bool openVerifyFlashFile() {
print_STR(verifying_STR, 1);
display_Update();
return openFileOnSD();
}
/******************************************
Command functions
*****************************************/
void writeByteCommand_Flash(byte command) {
if ((flashid == 0xBFB7) || (flashid == 0xBFB6) || (flashid == 0xBFB5)) {
//39F040
writeByte_Flash(0x5555, 0xaa);
writeByte_Flash(0x2aaa, 0x55);
writeByte_Flash(0x5555, command);
} else {
writeByte_Flash(0x555, 0xaa);
writeByte_Flash(0x2aa, 0x55);
writeByte_Flash(0x555, command);
}
}
void writeByteCommandShift_Flash(byte command) {
writeByte_Flash(0x5555 << 1, 0xaa);
writeByte_Flash(0x2aaa << 1, 0x55);
writeByte_Flash(0x5555 << 1, command);
}
void writeWordCommand_Flash(byte command) {
writeWord_Flash(0x5555, 0xaa);
writeWord_Flash(0x2aaa, 0x55);
writeWord_Flash(0x5555, command);
}
/******************************************
29F032/39SF040 flashrom functions
*****************************************/
void resetFlash29F032() {
// Set data pins to output
dataOut();
// Reset command sequence
writeByte_Flash(0x555, 0xf0);
// Set data pins to input again
dataIn8();
delay(500);
}
void idFlash39SF040() {
// Set data pins to output
dataOut();
writeByte_Flash(0x5555, 0xaa);
writeByte_Flash(0x2aaa, 0x55);
writeByte_Flash(0x5555, 0x90);
// Set data pins to input again
dataIn8();
// Read the two id bytes into a string
flashid = readByte_Flash(0) << 8;
flashid |= readByte_Flash(1);
sprintf(flashid_str, "%04X", flashid);
}
void idFlash29F032() {
// Set data pins to output
dataOut();
// ID command sequence
writeByteCommand_Flash(0x90);
// Set data pins to input again
dataIn8();
// Read the two id bytes into a string
flashid = readByte_Flash(0) << 8;
flashid |= readByte_Flash(1);
sprintf(flashid_str, "%04X", flashid);
}
void eraseFlash29F032() {
// Set data pins to output
dataOut();
// Erase command sequence
writeByteCommand_Flash(0x80);
writeByteCommand_Flash(0x10);
// Set data pins to input again
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
// After a completed erase D7 will output 1
while ((statusReg & 0x80) != 0x80) {
// Blink led
blinkLED();
delay(100);
// Update Status
statusReg = readByte_Flash(0);
}
}
void writeFlash29F032() {
if (openFlashFile()) {
// Set data pins to output
dataOut();
// Retry writing, for when /RESET is not connected (floating)
int dq5failcnt = 0;
int noread = 0;
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
// Fill sdBuffer
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
// if (currByte >= 0) {
// print_Msg(currByte);
// print_Msg(FS(FSTRING_SPACE));
// print_Msg(dq5failcnt);
// println_Msg(FS(FSTRING_EMPTY));
// }
if (!noread) {
myFile.read(sdBuffer, 512);
}
// Blink led
if (currByte % 2048 == 0)
blinkLED();
noInterrupts();
int blockfailcnt = 0;
for (int c = 0; c < 512; c++) {
uint8_t datum = sdBuffer[c];
dataIn8();
uint8_t d = readByte_Flash(currByte + c);
dataOut();
if (d == datum || datum == 0xFF) {
continue;
}
// Write command sequence
writeByteCommand_Flash(0xa0);
// Write current byte
writeByte_Flash(currByte + c, datum);
if (busyCheck29F032(currByte + c, datum)) {
dq5failcnt++;
blockfailcnt++;
}
}
interrupts();
if (blockfailcnt > 0) {
print_Msg(F("Failures at "));
print_Msg(currByte);
print_Msg(F(": "));
print_Msg(blockfailcnt);
println_Msg(FS(FSTRING_EMPTY));
dq5failcnt -= blockfailcnt;
currByte -= 512;
delay(100);
noread = 1;
} else {
noread = 0;
}
// update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
}
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
}
int busyCheck29F032(uint32_t addr, byte c) {
int ret = 0;
// Set data pins to input
dataIn8();
if (byteCtrl) {
// Setting OE(PH1) CE(PH6)LOW
PORTH &= ~((1 << 1) | (1 << 6));
} else {
// Setting OE(PH1) OE_SNS(PH3) CE(PH6)LOW
PORTH &= ~((1 << 1) | (1 << 3) | (1 << 6));
}
// Setting WE(PH4) WE_SNES(PH5) HIGH
PORTH |= (1 << 4) | (1 << 5);
//When the Embedded Program algorithm is complete, the device outputs the datum programmed to D7
for (;;) {
uint8_t d = readByte_Flash(addr);
if ((d & 0x80) == (c & 0x80)) {
break;
}
if ((d & 0x20) == 0x20) {
// From the datasheet:
// DQ 5 will indicate if the program or erase time has exceeded the specified limits (internal pulse count).
// Under these conditions DQ 5 will produce a “1”.
// This is a failure condition which indicates that the program or erase cycle was not successfully completed.
// Note : DQ 7 is rechecked even if DQ 5 = “1” because DQ 7 may change simultaneously with DQ 5 .
d = readByte_Flash(addr);
if ((d & 0x80) == (c & 0x80)) {
break;
} else {
ret = 1;
break;
}
}
}
// Set data pins to output
dataOut();
if (byteCtrl) {
// Setting OE(PH1) HIGH
PORTH |= (1 << 1);
} else {
// Setting OE(PH1) OE_SNS(PH3) HIGH
PORTH |= (1 << 1) | (1 << 3);
}
return ret;
}
/******************************************
29F1610 flashrom functions
*****************************************/
void resetFlash29F1610() {
// Set data pins to output
dataOut();
// Reset command sequence
writeByteCommandShift_Flash(0xf0);
// Set data pins to input again
dataIn8();
delay(500);
}
void writeFlash29F1610() {
if (openFlashFile()) {
// Set data pins to output
dataOut();
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 3072 == 0)
blinkLED();
// Check if write is complete
delayMicroseconds(100);
busyCheck29F1610();
// Write command sequence
writeByteCommandShift_Flash(0xa0);
// Write one full page at a time
for (byte c = 0; c < 128; c++) {
writeByte_Flash(currByte + c, sdBuffer[c]);
}
// update progress bar
processedProgressBar += 128;
draw_progressbar(processedProgressBar, totalProgressBar);
}
// Check if write is complete
busyCheck29F1610();
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
}
void writeFlash29F1601() {
if (openFlashFile()) {
// Set data pins to output
dataOut();
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 3072 == 0)
blinkLED();
// Check if write is complete
delayMicroseconds(100);
busyCheck29F1610();
// Write command sequence
writeByteCommandShift_Flash(0xa0);
// Write one full page at a time
for (byte c = 0; c < 128; c++) {
writeByte_Flash(currByte + c, sdBuffer[c]);
if (c == 127) {
// Write the last byte twice or else it won't write at all
writeByte_Flash(currByte + c, sdBuffer[c]);
}
}
// update progress bar
processedProgressBar += 128;
draw_progressbar(processedProgressBar, totalProgressBar);
}
// Check if write is complete
busyCheck29F1610();
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
}
void idFlash29F1610() {
// Set data pins to output
dataOut();
// ID command sequence
writeByteCommandShift_Flash(0x90);
// Set data pins to input again
dataIn8();
// Read the two id bytes into a string
flashid = readByte_Flash(0) << 8;
flashid |= readByte_Flash(2);
sprintf(flashid_str, "%04X", flashid);
}
byte readStatusReg() {
// Set data pins to output
dataOut();
// Status reg command sequence
writeByteCommandShift_Flash(0x70);
// Set data pins to input again
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
return statusReg;
}
void eraseFlash29F1610() {
// Set data pins to output
dataOut();
// Erase command sequence
writeByteCommandShift_Flash(0x80);
writeByteCommandShift_Flash(0x10);
// Set data pins to input again
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
while ((statusReg & 0x80) != 0x80) {
statusReg = readByte_Flash(0);
// Blink led
blinkLED();
delay(100);
}
}
// Delay between write operations based on status register
void busyCheck29F1610() {
// Set data pins to input
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
while ((statusReg & 0x80) != 0x80) {
statusReg = readByte_Flash(0);
}
// Set data pins to output
dataOut();
}
/******************************************
MX29LV flashrom functions
*****************************************/
void busyCheck29LV640(unsigned long myAddress, byte myData) {
// Set data pins to input
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(myAddress);
while ((statusReg & 0x80) != (myData & 0x80)) {
statusReg = readByte_Flash(myAddress);
}
// Set data pins to output
dataOut();
}
void writeFlash29LV640() {
if (openFlashFile()) {
// Set data pins to output
dataOut();
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
// Fill sdBuffer
myFile.read(sdBuffer, 512);
// Blink led
if (currByte % 4096 == 0)
blinkLED();
for (int c = 0; c < 512; c++) {
// Write command sequence
writeByte_Flash(0x555 << 1, 0xaa);
writeByte_Flash(0x2aa << 1, 0x55);
writeByte_Flash(0x555 << 1, 0xa0);
// Write current byte
writeByte_Flash(currByte + c, sdBuffer[c]);
// Check if write is complete
busyCheck29LV640(currByte + c, sdBuffer[c]);
}
// update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
}
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
}
/******************************************
S29GL flashrom functions
*****************************************/
void writeFlash29GL(unsigned long sectorSize, byte bufferSize) {
if (openFlashFile()) {
// Set data pins to output
dataOut();
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
// Blink led
blinkLED();
// Write to flashrom
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
// Write bufferSize bytes at a time
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += bufferSize) {
// 2 unlock commands
writeByte_Flash(0x555 << 1, 0xaa);
writeByte_Flash(0x2aa << 1, 0x55);
// Write buffer load command at sector address
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer, 0x25);
// Write byte count (minus 1) at sector address
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer, bufferSize - 1);
// Load bytes into buffer
for (byte currByte = 0; currByte < bufferSize; currByte++) {
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer + currByte, sdBuffer[currWriteBuffer + currByte]);
}
// Write Buffer to Flash
writeByte_Flash(currSector + currSdBuffer + currWriteBuffer + bufferSize - 1, 0x29);
// Read the status register at last written address
dataIn8();
byte statusReg = readByte_Flash(currSector + currSdBuffer + currWriteBuffer + bufferSize - 1);
while ((statusReg & 0x80) != (sdBuffer[currWriteBuffer + bufferSize - 1] & 0x80)) {
statusReg = readByte_Flash(currSector + currSdBuffer + currWriteBuffer + bufferSize - 1);
}
dataOut();
}
}
// update progress bar
processedProgressBar += sectorSize;
draw_progressbar(processedProgressBar, totalProgressBar);
}
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
}
/******************************************
29F800 functions
*****************************************/
void writeFlash29F800() {
if (openFlashFile()) {
// Set data pins to output
dataOut();
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
// Fill sdBuffer
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
myFile.read(sdBuffer, 512);
// Blink led
if (currByte % 2048 == 0)
blinkLED();
for (int c = 0; c < 512; c++) {
// Write command sequence
writeByteCommandShift_Flash(0xa0);
// Write current byte
writeByte_Flash(currByte + c, sdBuffer[c]);
busyCheck29F032(currByte + c, sdBuffer[c]);
}
// update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
}
// Set data pins to input again
dataIn8();
// Close the file:
myFile.close();
}
}
/******************************************
28FXXX series flashrom functions
*****************************************/
void idFlash28FXXX() {
dataOut();
writeByte_Flash(0x0, 0x90);
dataIn8();
// Read the two id bytes into a string
flashid = readByte_Flash(0) << 8;
flashid |= readByte_Flash(1);
sprintf(flashid_str, "%04X", flashid);
}
void resetFlash28FXXX() {
dataOut();
writeByte_Flash(0x0, 0xff);
dataIn();
delay(500);
}
uint8_t statusFlash28FXXX() {
dataOut();
writeByte_Flash(0x0, 0x70);
dataIn8();
return readByte_Flash(0x0);
}
void eraseFlash28FXXX() {
// only can erase block by block
for (uint32_t ba = 0; ba < flashSize; ba += sectorSize) {
dataOut();
writeByte_Flash(ba, 0x20);
writeByte_Flash(ba, 0xd0);
dataIn8();
while ((readByte_Flash(ba) & 0x80) == 0x00)
;
// blink LED
blinkLED();
}
}
void writeFlash28FXXX() {
if (openFlashFile()) {
if ((flashid == 0xB088))
writeFlashLH28F0XX();
else if ((flashid == 0x8916) || (flashid == 0x8917) || (flashid == 0x8918)) {
writeFlashE28FXXXJ3A();
}
myFile.close();
}
}
void writeFlashE28FXXXJ3A() {
uint32_t block_addr;
uint32_t block_addr_mask = ~(sectorSize - 1);
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
// Fill sdBuffer
for (uint32_t currByte = 0; currByte < fileSize; currByte += 512) {
myFile.read(sdBuffer, 512);
// Blink led
if (currByte % 2048 == 0)
blinkLED();
block_addr = currByte & block_addr_mask;
for (uint32_t c = 0; c < 512; c += bufferSize) {
// write to buffer start
dataOut();
writeByte_Flash(block_addr, 0xe8);
// waiting for buffer available
dataIn8();
while ((readByte_Flash(block_addr) & 0x80) == 0x00)
;
dataOut();
// set write byte count
writeByte_Flash(block_addr, bufferSize - 1);
// filling buffer
for (uint32_t d = 0; d < bufferSize; d++)
writeByte_Flash(currByte + c + d, sdBuffer[c + d]);
// start flashing page
writeByte_Flash(block_addr, 0xd0);
// waiting for finishing
dataIn8();
while ((readByte_Flash(block_addr) & 0x80) == 0x00)
;
}
// update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
}
dataIn8();
}
void writeFlashLH28F0XX() {
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
// Fill sdBuffer
for (uint32_t currByte = 0; currByte < fileSize; currByte += 512) {
myFile.read(sdBuffer, 512);
// Blink led
if (currByte % 2048 == 0)
blinkLED();
for (uint32_t c = 0; c < 512; c += bufferSize) {
// sequence load to page
dataOut();
writeByte_Flash(0x0, 0xe0);
writeByte_Flash(0x0, bufferSize - 1); // BCL
writeByte_Flash(0x0, 0x00); // BCH should be 0x00
for (uint32_t d = 0; d < bufferSize; d++)
writeByte_Flash(d, sdBuffer[c + d]);
// start flashing page
writeByte_Flash(0x0, 0x0c);
writeByte_Flash(0x0, bufferSize - 1); // BCL
writeByte_Flash(currByte + c, 0x00); // BCH should be 0x00
// waiting for finishing
dataIn8();
while ((readByte_Flash(currByte + c) & 0x80) == 0x00)
;
}
// update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
}
dataIn8();
}
/******************************************
Common flashrom functions
*****************************************/
void blankcheck_Flash() {
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = flashSize;
draw_progressbar(0, totalProgressBar);
blank = 1;
for (unsigned long currBuffer = 0; currBuffer < flashSize; currBuffer += 512) {
// Fill buffer
for (int c = 0; c < 512; c++) {
// Read byte
sdBuffer[c] = readByte_Flash(currBuffer + c);
}
// Check if all bytes are 0xFF
for (uint32_t currByte = 0; currByte < 512; currByte++) {
if (sdBuffer[currByte] != 0xFF) {
currByte = 512;
currBuffer = flashSize;
blank = 0;
}
}
// Update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
// Blink led
if (currBuffer % 25600 == 0)
blinkLED();
}
if (blank) {
println_Msg(F("Flashrom is empty"));
display_Update();
} else {
println_Msg(FS(FSTRING_EMPTY));
print_Error(F("Error: Not blank"));
}
}
void verifyFlash() {
verifyFlash(1, 1, 0);
}
void verifyFlash(byte currChip, byte totalChips, boolean reversed) {
if (openVerifyFlashFile()) {
blank = 0;
// Adjust filesize to fit flashchip
adjustFileSizeOffset(currChip, totalChips, reversed);
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = fileSize;
draw_progressbar(0, totalProgressBar);
for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {
if ((reversed) && (currChip == 1) && (totalChips == 1) && (fileSize == 8388608) && (currByte == 4194304)) {
myFile.seekSet(0);
}
if ((reversed) && (currChip == 1) && (totalChips == 1) && (fileSize == 6291456) && (currByte == 2097152)) {
myFile.seekSet(0);
currByte = 4194304;
fileSize = 8388608;
}
//fill sdBuffer
myFile.read(sdBuffer, 512);
for (int c = 0; c < 512; c++) {
if (readByte_Flash(currByte + c) != sdBuffer[c]) {
blank++;
}
}
// Update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
// Blink led
if (currByte % 25600 == 0)
blinkLED();
}
if (blank == 0) {
println_Msg(F("Flashrom verified OK"));
display_Update();
} else {
print_STR(error_STR, 0);
print_Msg(blank);
print_STR(_bytes_STR, 1);
print_Error(did_not_verify_STR);
}
// Close the file:
myFile.close();
}
}
void readFlash() {
// Reset to root directory
sd.chdir("/");
createFolderAndOpenFile("FLASH", NULL, "FL", "bin");
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = flashSize;
draw_progressbar(0, totalProgressBar);
for (unsigned long currByte = 0; currByte < flashSize; currByte += 512) {
for (int c = 0; c < 512; c++) {
sdBuffer[c] = readByte_Flash(currByte + c);
}
myFile.write(sdBuffer, 512);
// Update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
// Blink led
if (currByte % 25600 == 0)
blinkLED();
}
// Close the file:
myFile.close();
println_Msg(F("Finished reading"));
display_Update();
}
void printFlash(int numBytes) {
char myBuffer[3];
for (int currByte = 0; currByte < numBytes; currByte += 10) {
for (int c = 0; c < 10; c++) {
sprintf(myBuffer, "%.2x", readByte_Flash(currByte + c));
// Now print the significant bits
print_Msg(myBuffer);
}
println_Msg("");
}
display_Update();
}
void resetFlash8() {
switch (flashromType) {
case 1: resetFlash29F032(); break;
case 2: resetFlash29F1610(); break;
case 3: resetFlash28FXXX(); break;
}
}
#ifdef ENABLE_FLASH16
/******************************************
29L3211 16bit flashrom functions
*****************************************/
void resetFlash16() {
// Set data pins to output
dataOut16();
// Reset command sequence
writeWordCommand_Flash(0xf0);
// Set data pins to input again
dataIn16();
delay(500);
}
void writeFlash16() {
if (openFlashFile()) {
// Set data pins to output
dataOut16();
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
int d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) {
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 2048 == 0)
blinkLED();
// Check if write is complete
delayMicroseconds(100);
busyCheck16();
// Write command sequence
writeWordCommand_Flash(0xa0);
// Write one full page at a time
for (byte c = 0; c < 64; c++) {
word currWord = ((sdBuffer[d + 1] & 0xFF) << 8) | (sdBuffer[d] & 0xFF);
writeWord_Flash(currByte + c, currWord);
d += 2;
}
d = 0;
}
// Check if write is complete
busyCheck16();
// Set data pins to input again
dataIn16();
// Close the file:
myFile.close();
}
}
void writeFlash16_29F1601() {
if (openFlashFile()) {
// Set data pins to output
dataOut16();
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
int d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) {
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 2048 == 0)
blinkLED();
// Check if write is complete
delayMicroseconds(100);
busyCheck16();
// Write command sequence
writeWordCommand_Flash(0xa0);
// Write one full page at a time
for (byte c = 0; c < 64; c++) {
word currWord = ((sdBuffer[d + 1] & 0xFF) << 8) | (sdBuffer[d] & 0xFF);
writeWord_Flash(currByte + c, currWord);
if (c == 63) {
// Write the last byte twice or else it won't write at all
writeWord_Flash(currByte + c, sdBuffer[d + 1]);
}
d += 2;
}
d = 0;
}
// Check if write is complete
busyCheck16();
// Set data pins to input again
dataIn16();
// Close the file:
myFile.close();
}
}
void idFlash16() {
// Set data pins to output
dataOut16();
// ID command sequence
writeWordCommand_Flash(0x90);
// Set data pins to input again
dataIn16();
// Read the two id bytes into a string
flashid = (readWord_Flash(0) & 0xFF) << 8;
flashid |= readWord_Flash(1) & 0xFF;
sprintf(flashid_str, "%04X", flashid);
}
byte readStatusReg16() {
// Set data pins to output
dataOut16();
// Status reg command sequence
writeWordCommand_Flash(0x70);
// Set data pins to input again
dataIn16();
// Read the status register
byte statusReg = readWord_Flash(0);
return statusReg;
}
void eraseFlash16() {
// Set data pins to output
dataOut16();
// Erase command sequence
writeWordCommand_Flash(0x80);
writeWordCommand_Flash(0x10);
// Set data pins to input again
dataIn16();
busyCheck16();
}
void blankcheck16() {
println_Msg(F("Please wait..."));
display_Update();
blank = 1;
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte++) {
if (readWord_Flash(currByte) != 0xFFFF) {
currByte = flashSize / 2;
blank = 0;
}
}
if (blank) {
println_Msg(F("Flashrom is empty."));
display_Update();
} else {
print_Error(F("Error: Not blank"));
}
}
void verifyFlash16() {
if (openVerifyFlashFile()) {
blank = 0;
word d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 256) {
//fill sdBuffer
myFile.read(sdBuffer, 512);
for (int c = 0; c < 256; c++) {
word currWord = ((sdBuffer[d + 1] << 8) | sdBuffer[d]);
if (readWord_Flash(currByte + c) != currWord) {
blank++;
}
d += 2;
}
d = 0;
}
if (blank == 0) {
println_Msg(F("Flashrom verified OK"));
display_Update();
} else {
println_Msg(F("Verification ERROR!"));
print_Msg(blank);
print_Error(F("B did not verify."));
display_Update();
}
// Close the file:
myFile.close();
}
}
void readFlash16() {
// Reset to root directory
sd.chdir("/");
createFolderAndOpenFile("FLASH", NULL, "FL", "bin");
word d = 0;
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte += 256) {
for (word c = 0; c < 256; c++) {
word currWord = readWord_Flash(currByte + c);
// Split word into two bytes
// Right
sdBuffer[d + 1] = ((currWord >> 8) & 0xFF);
// Left
sdBuffer[d] = (currWord & 0xFF);
d += 2;
}
myFile.write(sdBuffer, 512);
d = 0;
}
// Close the file:
myFile.close();
println_Msg(F("Finished reading."));
display_Update();
}
void printFlash16(int numBytes) {
/*
right_byte = short_val & 0xFF;
left_byte = ( short_val >> 8 ) & 0xFF
short_val = ( ( left_byte & 0xFF ) << 8 ) | ( right_byte & 0xFF );
*/
char buf[3];
for (int currByte = 0; currByte < numBytes / 2; currByte += 5) {
// 5 words per line
for (int c = 0; c < 5; c++) {
word currWord = readWord_Flash(currByte + c);
// Split word into two bytes
byte left_byte = currWord & 0xFF;
byte right_byte = (currWord >> 8) & 0xFF;
sprintf(buf, "%.2X", left_byte);
// Now print the significant bits
print_Msg(buf);
sprintf(buf, "%.2X", right_byte);
// Now print the significant bits
print_Msg(buf);
}
println_Msg("");
}
display_Update();
}
// Delay between write operations based on status register
void busyCheck16() {
// Set data pins to input
dataIn16();
// Read the status register
word statusReg = readWord_Flash(0);
while ((statusReg | 0xFF7F) != 0xFFFF) {
statusReg = readWord_Flash(0);
}
// Set data pins to output
dataOut16();
}
/******************************************
MX29LV flashrom functions 16bit
*****************************************/
// Delay between write operations based on status register
void busyCheck16_29LV640(unsigned long myAddress, word myData) {
// Set data pins to input
dataIn16();
// Read the status register
word statusReg = readWord_Flash(myAddress);
while ((statusReg & 0x80) != (myData & 0x80)) {
statusReg = readWord_Flash(myAddress);
}
// Set data pins to output
dataOut16();
}
void writeFlash16_29LV640() {
if (openFlashFile()) {
// Set data pins to output
dataOut16();
int d = 0;
for (unsigned long currWord = 0; currWord < fileSize / 2; currWord += 256) {
// Fill sdBuffer
myFile.read(sdBuffer, 512);
// Blink led
if (currWord % 4096 == 0)
blinkLED();
for (int c = 0; c < 256; c++) {
// Write command sequence
writeWordCommand_Flash(0xa0);
// Write current word
word myWord = ((sdBuffer[d + 1] & 0xFF) << 8) | (sdBuffer[d] & 0xFF);
writeWord_Flash(currWord + c, myWord);
d += 2;
// Check if write is complete
busyCheck16_29LV640(currWord + c, myWord);
}
d = 0;
}
// Set data pins to input again
dataIn16();
// Close the file:
myFile.close();
}
}
/******************************************
Eprom functions
*****************************************/
word writeWord_Eprom(unsigned long myAddress, word myData) {
// Data out
DDRC = 0xFF;
DDRA = 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t");
// Set address
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Set data
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
__asm__("nop\n\t");
// Switch VPP/OE(PH5) to HIGH
PORTH |= (1 << 5);
// Wait 1us for VPP High to Chip Enable Low
delayMicroseconds(1);
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Leave VPP HIGH for 50us Chip Enable Program Pulse Width
delayMicroseconds(55);
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
// Wait 2us for Chip Enable High to VPP Transition
delayMicroseconds(2);
// Switch VPP/OE(PH5) to LOW
PORTH &= ~(1 << 5);
// Leave CE High for 1us for VPP Low to Chip Enable Low
delayMicroseconds(1);
// Data in
DDRC = 0x00;
DDRA = 0x00;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Wait 1us for Chip Enable Low to Output Valid while program verify
delayMicroseconds(3);
// Read
word tempWord = ((PINA & 0xFF) << 8) | (PINC & 0xFF);
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
// Delay 130ns for Chip Enable High to Output Hi-Z
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t");
return tempWord;
}
word readWord_Eprom(unsigned long myAddress) {
// Data in
DDRC = 0x00;
DDRA = 0x00;
// Set address
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t");
// Setting CE(PH6) LOW
PORTH &= ~(1 << 6);
// Delay for 100ns for Address Valid/Chip Enable Low to Output Valid
__asm__("nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t");
// Read
word tempWord = ((PINA & 0xFF) << 8) | (PINC & 0xFF);
// Setting CE(PH6) HIGH
PORTH |= (1 << 6);
return tempWord;
}
void blankcheck_Eprom() {
println_Msg(F("Please wait..."));
display_Update();
blank = 1;
for (unsigned long currWord = 0; currWord < flashSize / 2; currWord++) {
if (readWord_Eprom(currWord) != 0xFFFF) {
currWord = flashSize / 2;
blank = 0;
}
}
if (blank) {
println_Msg(F("Flashrom is empty."));
display_Update();
} else {
print_Error(F("Error: Not blank"));
}
}
void read_Eprom() {
// Reset to root directory
sd.chdir("/");
createFolderAndOpenFile("FLASH", NULL, "FL", "bin");
word d = 0;
for (unsigned long currWord = 0; currWord < flashSize / 2; currWord += 256) {
for (word c = 0; c < 256; c++) {
word myWord = readWord_Eprom(currWord + c);
// Split word into two bytes
// Right
sdBuffer[d + 1] = ((myWord >> 8) & 0xFF);
// Left
sdBuffer[d] = (myWord & 0xFF);
d += 2;
}
myFile.write(sdBuffer, 512);
d = 0;
}
// Close the file:
myFile.close();
println_Msg(F("Finished reading."));
display_Update();
}
void write_Eprom() {
if (openFlashFile()) {
// Switch VPP/OE(PH5) to HIGH
PORTH |= (1 << 5);
delay(1000);
for (unsigned long currWord = 0; currWord < fileSize / 2; currWord += 256) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
int d = 0;
// Blink led
if (currWord % 2048 == 0)
blinkLED();
// Work through SD buffer
for (int c = 0; c < 256; c++) {
word checkWord;
word myWord = ((sdBuffer[d + 1] & 0xFF) << 8) | (sdBuffer[d] & 0xFF);
// Error counter
byte n = 0;
// Presto III allows up to 25 rewrites per word
do {
// Write word
checkWord = writeWord_Eprom(currWord + c, myWord);
// Check for fail
if (n == 25) {
print_Msg(F("Program Error 0x"));
println_Msg(currWord + c, HEX);
print_Msg(F("0x"));
print_Msg(readWord_Eprom(currWord + c), HEX);
print_Msg(F(" != 0x"));
println_Msg(myWord, HEX);
print_FatalError(F("Press button to reset"));
}
n++;
} while (checkWord != myWord);
d += 2;
}
}
// Close the file:
myFile.close();
}
}
void verify_Eprom() {
if (openVerifyFlashFile()) {
blank = 0;
word d = 0;
for (unsigned long currWord = 0; currWord < (fileSize / 2); currWord += 256) {
//fill sdBuffer
myFile.read(sdBuffer, 512);
for (int c = 0; c < 256; c++) {
word myWord = (((sdBuffer[d + 1] & 0xFF) << 8) | (sdBuffer[d] & 0xFF));
if (readWord_Eprom(currWord + c) != myWord) {
blank++;
}
d += 2;
}
d = 0;
}
if (blank == 0) {
println_Msg(F("Eprom verified OK"));
display_Update();
} else {
println_Msg(F("Verification ERROR!"));
print_Msg(blank);
print_Error(F(" words did not verify."));
display_Update();
}
// Close the file:
myFile.close();
}
}
void print_Eprom(int numBytes) {
char buf[3];
for (int currByte = 0; currByte < numBytes / 2; currByte += 5) {
// 5 words per line
for (int c = 0; c < 5; c++) {
word currWord = readWord_Eprom(currByte + c);
// Split word into two bytes
byte left_byte = currWord & 0xFF;
byte right_byte = (currWord >> 8) & 0xFF;
sprintf(buf, "%.2x", left_byte);
// Now print the significant bits
print_Msg(buf);
sprintf(buf, "%.2x", right_byte);
// Now print the significant bits
print_Msg(buf);
}
println_Msg("");
}
display_Update();
}
#endif
/******************************************
CFI flashrom functions (modified from GB.ino)
*****************************************/
void sendCFICommand_Flash(byte cmd) {
writeByteCompensated_Flash(0xAAA, 0xaa);
writeByteCompensated_Flash(0x555, 0x55);
writeByteCompensated_Flash(0xAAA, cmd);
}
byte readByteCompensated_Flash(int address) {
byte data = readByte_Flash(address >> (flashX16Mode ? 1 : 0));
if (flashSwitchLastBits) {
return (data & 0b11111100) | ((data << 1) & 0b10) | ((data >> 1) & 0b01);
}
return data;
}
void writeByteCompensated_Flash(int address, byte data) {
if (flashSwitchLastBits) {
data = (data & 0b11111100) | ((data << 1) & 0b10) | ((data >> 1) & 0b01);
}
writeByte_Flash(address >> (flashX16Mode ? 1 : 0), data);
}
void startCFIMode_Flash(boolean x16Mode) {
if (x16Mode) {
writeByte_Flash(0x555, 0xf0); //x16 mode reset command
delay(500);
writeByte_Flash(0x555, 0xf0); //Double reset to get out of possible Autoselect + CFI mode
delay(500);
writeByte_Flash(0x55, 0x98); //x16 CFI Query command
} else {
writeByte_Flash(0xAAA, 0xf0); //x8 mode reset command
delay(100);
writeByte_Flash(0xAAA, 0xf0); //Double reset to get out of possible Autoselect + CFI mode
delay(100);
writeByte_Flash(0xAA, 0x98); //x8 CFI Query command
}
}
void identifyCFI_Flash() {
display_Clear();
// Reset flash
dataOut();
writeByteCompensated_Flash(0xAAA, 0xf0);
delay(100);
// Trying x8 mode first
startCFIMode_Flash(false);
dataIn8();
char cfiQRYx8[7];
char cfiQRYx16[7];
sprintf(cfiQRYx8, "%02X%02X%02X", readByte_Flash(0x20), readByte_Flash(0x22), readByte_Flash(0x24));
sprintf(cfiQRYx16, "%02X%02X%02X", readByte_Flash(0x10), readByte_Flash(0x11), readByte_Flash(0x12));
if (strcmp(cfiQRYx8, "515259") == 0) {
println_Msg(F("Normal CFI x8 Mode"));
flashX16Mode = false;
flashSwitchLastBits = false;
} else if (strcmp(cfiQRYx8, "52515A") == 0) { // QRY in x8 mode with switched last bit
println_Msg(F("Switched CFI x8 Mode"));
flashX16Mode = false;
flashSwitchLastBits = true;
} else if (strcmp(cfiQRYx16, "515259") == 0) { // QRY in x16 mode
println_Msg(F("Normal CFI x16 Mode"));
flashX16Mode = true;
flashSwitchLastBits = false;
} else if (strcmp(cfiQRYx16, "52515A") == 0) { // QRY in x16 mode with switched last bit
println_Msg(F("Switched CFI x16 Mode"));
flashX16Mode = true;
flashSwitchLastBits = true;
} else {
// Try x16 mode next
startCFIMode_Flash(true);
sprintf(cfiQRYx16, "%02X%02X%02X", readByte_Flash(0x10), readByte_Flash(0x11), readByte_Flash(0x12));
if (strcmp(cfiQRYx16, "515259") == 0) { // QRY in x16 mode
println_Msg(F("Normal CFI x16 Mode"));
flashX16Mode = true;
flashSwitchLastBits = false;
} else if (strcmp(cfiQRYx16, "52515A") == 0) { // QRY in x16 mode with switched last bit
println_Msg(F("Switched CFI x16 Mode"));
flashX16Mode = true;
flashSwitchLastBits = true;
} else {
println_Msg(F("CFI Query failed!"));
print_STR(press_button_STR, 0);
display_Update();
wait();
resetArduino();
return;
}
}
flashBanks = 1 << (readByteCompensated_Flash(0x4E) - 14); // - flashX16Mode);
// Reset flash
dataOut();
writeByteCompensated_Flash(0xAAA, 0xf0);
dataIn8();
delay(100);
display_Update();
}
// Adjust file size to fit flash chip and goto needed file offset
void adjustFileSizeOffset(byte currChip, byte totalChips, boolean reversed) {
// 1*2MB, 1*4MB or 1*8MB
if ((currChip == 1) && (totalChips == 1)) {
if (reversed)
myFile.seekSet(4194304);
}
// 2*2MB or 2*4MB
else if ((currChip == 1) && (totalChips == 2)) {
if (reversed) {
if (fileSize > 4194304) {
fileSize = fileSize - flashSize / 2;
myFile.seekSet(4194304);
} else
fileSize = 0;
} else if (fileSize > flashSize / 2)
fileSize = flashSize / 2;
} else if ((currChip == 2) && (totalChips == 2)) {
if (reversed) {
fileSize = flashSize / 2;
myFile.seekSet(0);
} else if (fileSize > flashSize / 2) {
fileSize = fileSize - flashSize / 2;
myFile.seekSet(flashSize / 2);
} else
fileSize = 0;
}
// 4*2MB
else if ((currChip == 1) && (totalChips == 4)) {
if (reversed) {
if (fileSize > 4194304) {
myFile.seekSet(4194304);
fileSize = 2097152;
} else
fileSize = 0;
} else if (fileSize > 2097152)
fileSize = 2097152;
} else if ((currChip == 2) && (totalChips == 4)) {
if (reversed) {
if (fileSize > 6291456) {
myFile.seekSet(6291456);
fileSize = 2097152;
} else
fileSize = 0;
} else {
if (fileSize > 2097152) {
myFile.seekSet(2097152);
fileSize = 2097152;
} else
fileSize = 0;
}
} else if ((currChip == 3) && (totalChips == 4)) {
if (reversed) {
myFile.seekSet(0);
fileSize = 2097152;
} else {
if (fileSize > 4194304) {
myFile.seekSet(4194304);
fileSize = 2097152;
} else
fileSize = 0;
}
} else if ((currChip == 4) && (totalChips == 4)) {
if (reversed) {
if (fileSize > 2097152) {
myFile.seekSet(2097152);
fileSize = 2097152;
} else
fileSize = 0;
} else {
if (fileSize > 6291456) {
myFile.seekSet(6291456);
fileSize = 2097152;
} else
fileSize = 0;
}
}
// skip write
else
fileSize = 0;
}
// Write flashrom
void writeCFI_Flash(byte currChip, byte totalChips, boolean reversed) {
if (openFileOnSD()) {
// Print filepath
print_STR(flashing_file_STR, 0);
print_Msg(filePath);
println_Msg(F("..."));
// Check size
if ((flashSize == 8388608) && (fileSize < 6291456) && reversed) {
println_Msg(FS(FSTRING_EMPTY));
print_STR(error_STR, 0);
print_FatalError(F("ROM file not ExROM"));
}
display_Update();
// Reset flash
dataOut();
writeByteCompensated_Flash(0xAAA, 0xf0);
dataIn8();
delay(100);
// Reset flash
dataOut();
writeByte_Flash(0x555, 0xf0);
dataIn8();
delay(100);
println_Msg(F("Erasing..."));
display_Update();
// Erase flash
dataOut();
sendCFICommand_Flash(0x80);
sendCFICommand_Flash(0x10);
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(0);
// After a completed erase D7 will output 1
while ((statusReg & 0x80) != 0x80) {
// Blink led
blinkLED();
delay(100);
// Update Status
statusReg = readByte_Flash(0);
}
// Adjust filesize to fit flashchip
adjustFileSizeOffset(currChip, totalChips, reversed);
print_Msg(F("Writing flash"));
// File offset indicator for SNES repros with multiple chips
if ((totalChips > 1) || reversed) {
print_Msg(FS(FSTRING_SPACE));
print_Msg(currChip);
print_Msg(F("/"));
print_Msg(totalChips);
print_Msg(FS(FSTRING_SPACE));
print_Msg(FS(FSTRING_SPACE));
print_Msg(FS(FSTRING_SPACE));
print_Msg(FS(FSTRING_SPACE));
switch (myFile.curPosition() / 1024 / 1024UL) {
case 0:
println_Msg(F("[A]BCD"));
break;
case 2:
println_Msg(F("A[B]CD"));
break;
case 4:
println_Msg(F("AB[C]D"));
break;
case 6:
println_Msg(F("ABC[D]"));
break;
default:
println_Msg(FS(FSTRING_SPACE));
break;
}
} else
println_Msg(F("..."));
display_Update();
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)fileSize;
draw_progressbar(0, totalProgressBar);
for (unsigned long currAddr = 0; currAddr < fileSize; currAddr += 512) {
if ((reversed) && (currChip == 1) && (totalChips == 1) && (fileSize == 8388608) && (currAddr == 4194304)) {
myFile.seekSet(0);
}
if ((reversed) && (currChip == 1) && (totalChips == 1) && (fileSize == 6291456) && (currAddr == 2097152)) {
myFile.seekSet(0);
currAddr = 4194304;
fileSize = 8388608;
}
myFile.read(sdBuffer, 512);
// Blink led
if (currAddr % 4096 == 0)
blinkLED();
for (int currByte = 0; currByte < 512; currByte++) {
// Write command sequence
dataOut();
sendCFICommand_Flash(0xa0);
// Write current byte
writeByte_Flash(currAddr + currByte, sdBuffer[currByte]);
dataIn8();
// Read the status register
byte statusReg = readByte_Flash(currAddr + currByte);
while ((statusReg & 0x80) != (sdBuffer[currByte] & 0x80)) {
statusReg = readByte_Flash(currAddr + currByte);
}
}
// update progress bar
processedProgressBar += 512;
draw_progressbar(processedProgressBar, totalProgressBar);
}
// Close the file:
myFile.close();
}
// Reset flash
dataOut();
writeByteCompensated_Flash(0xAAA, 0xf0);
delay(100);
dataIn8();
}
#endif
//******************************************
// End of File
//******************************************
Reference in New Issue View Git Blame Copy Permalink