mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-30 23:11:57 +01:00
1210 lines
31 KiB
C++
1210 lines
31 KiB
C++
//*********************************************************
|
|
// BANDAI WONDERSWAN & BENESSE POCKET CHALLENGE V2 MODULE
|
|
//*********************************************************
|
|
#ifdef ENABLE_WS
|
|
// Cartridge pinout
|
|
// 48P 1.25mm pitch connector
|
|
// C1, C48 : GND
|
|
// C24, C25 : VDD (+3.3v)
|
|
// C16-C23 : D7-D0
|
|
// C34-C39 : D8-D13
|
|
// C14-C15 : D15-D14
|
|
// C26-C29 : A(-1)-A2
|
|
// C10-C13 : A6-A3
|
|
// C30-C33 : A18-A15
|
|
// C2,C3,C4,C5 : A14,A9,A10,A8
|
|
// C6,C7,C8,C9 : A7,A12,A13,A11
|
|
// C40 : /RST
|
|
// C41 : /IO? (only use when unlocking MMC)
|
|
// C42 : /MMC (access port on cartridge with both /CART and /MMC = L)
|
|
// C43 : /OE
|
|
// C44 : /WE
|
|
// C45 : /CART? (L when accessing cartridge (ROM/SRAM/PORT))
|
|
// C46 : INT (for RTC alarm interrupt)
|
|
// C47 : CLK (384KHz on WS)
|
|
|
|
#ifdef OPTION_WS_ADAPTER_V2
|
|
#define WS_CLK_BIT 5 // USE PE5 as CLK
|
|
#else
|
|
#define WS_CLK_BIT 3 // USE PE3 as CLK
|
|
#endif
|
|
|
|
/******************************************
|
|
Menu
|
|
*****************************************/
|
|
static const char wsMenuItem5[] PROGMEM = "Write WitchOS";
|
|
static const char *const menuOptionsWS[] PROGMEM = { FSTRING_READ_ROM, FSTRING_READ_SAVE, FSTRING_WRITE_SAVE, FSTRING_RESET, wsMenuItem5 };
|
|
static const uint8_t wwLaunchCode[] PROGMEM = { 0xea, 0x00, 0x00, 0x00, 0xe0, 0x00, 0xff, 0xff };
|
|
static uint8_t wsGameOrientation = 0;
|
|
static uint8_t wsGameHasRTC = 0;
|
|
static uint16_t wsGameChecksum = 0;
|
|
static uint8_t wsEepromShiftReg[2];
|
|
static boolean wsWitch = false;
|
|
|
|
void setup_WS() {
|
|
// Request 3.3V
|
|
setVoltage(VOLTS_SET_3V3);
|
|
|
|
// A-1 - A6
|
|
DDRF = 0xff;
|
|
// A7 - A14
|
|
DDRK = 0xff;
|
|
// A15 - A22
|
|
DDRL = 0xff;
|
|
|
|
// D0 - D15
|
|
DDRC = 0x00;
|
|
DDRA = 0x00;
|
|
|
|
// controls
|
|
DDRH |= ((1 << 0) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6));
|
|
PORTH |= ((1 << 0) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6));
|
|
|
|
// CLK outputs LOW
|
|
DDRE |= (1 << WS_CLK_BIT);
|
|
PORTE &= ~(1 << WS_CLK_BIT);
|
|
|
|
// IO? as input with internal pull-up enabled
|
|
DDRE &= ~(1 << 4);
|
|
PORTE |= (1 << 4);
|
|
|
|
// INT as input with internal pull-up enabled
|
|
DDRG &= ~(1 << 5);
|
|
PORTG |= (1 << 5);
|
|
|
|
// unlock MMC
|
|
// if (!unlockMMC2003_WS())
|
|
// print_FatalError(F("Can't initial MMC"));
|
|
|
|
// if (getCartInfo_WS() != 0xea)
|
|
// print_FatalError(F("Rom header read error"));
|
|
|
|
println_Msg(F("Initializing..."));
|
|
display_Update();
|
|
|
|
do {
|
|
unlockMMC2003_WS();
|
|
} while (!headerCheck());
|
|
|
|
getCartInfo_WS();
|
|
|
|
showCartInfo_WS();
|
|
}
|
|
|
|
static boolean headerCheck() {
|
|
dataIn_WS();
|
|
|
|
for (uint32_t i = 0; i < 16; i += 2)
|
|
*((uint16_t *)(sdBuffer + i)) = readWord_WS(0xffff0 + i);
|
|
|
|
uint8_t startByte = sdBuffer[0];
|
|
if (startByte == 0xEA) { // Start should be 0xEA
|
|
uint8_t zeroByte = sdBuffer[5];
|
|
if (zeroByte == 0) { // Zero Byte
|
|
uint8_t systemByte = sdBuffer[7];
|
|
if (systemByte < 2) { // System < 2
|
|
uint8_t revisionByte = sdBuffer[9];
|
|
if ((revisionByte < 7) || (revisionByte == 0x80)) { // Known Revisions: 0 to 6 and 0x80
|
|
uint8_t sizeByte = sdBuffer[10];
|
|
if (sizeByte < 10) // Rom Size < 10
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void wsMenu() {
|
|
uint8_t mainMenu = (wsWitch ? 5 : 4);
|
|
|
|
convertPgm(menuOptionsWS, mainMenu);
|
|
mainMenu = question_box(F("WS Menu"), menuOptions, mainMenu, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
{
|
|
// Read Rom
|
|
sd.chdir("/");
|
|
compareChecksum_WS(readROM_WS(filePath, FILEPATH_LENGTH));
|
|
sd.chdir("/");
|
|
break;
|
|
}
|
|
case 1:
|
|
{
|
|
// Read Save
|
|
sd.chdir("/");
|
|
switch (saveType) {
|
|
case 0: println_Msg(F("No save for this game")); break;
|
|
case 1: readSRAM_WS(); break;
|
|
case 2: readEEPROM_WS(); break;
|
|
default: println_Msg(F("Unknown save type")); break;
|
|
}
|
|
|
|
break;
|
|
}
|
|
case 2:
|
|
{
|
|
// Write Save
|
|
sd.chdir("/");
|
|
switch (saveType) {
|
|
case 0: println_Msg(F("No save for this game")); break;
|
|
case 1:
|
|
{
|
|
writeSRAM_WS();
|
|
verifySRAM_WS();
|
|
break;
|
|
}
|
|
case 2:
|
|
{
|
|
writeEEPROM_WS();
|
|
verifyEEPROM_WS();
|
|
break;
|
|
}
|
|
default: println_Msg(F("Unknown save type")); break;
|
|
}
|
|
|
|
break;
|
|
}
|
|
case 4:
|
|
{
|
|
writeWitchOS_WS();
|
|
break;
|
|
}
|
|
default:
|
|
{
|
|
// reset
|
|
asm volatile(" jmp 0");
|
|
break;
|
|
}
|
|
}
|
|
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
static uint8_t getCartInfo_WS() {
|
|
dataIn_WS();
|
|
|
|
// for (uint32_t i = 0; i < 16; i += 2)
|
|
// *((uint16_t*)(sdBuffer + i)) = readWord_WS(0xffff0 + i);
|
|
|
|
wsGameChecksum = *(uint16_t *)(sdBuffer + 14);
|
|
wsWitch = false;
|
|
|
|
// some game has wrong info in header
|
|
// patch here
|
|
switch (wsGameChecksum) {
|
|
// games with wrong save type/size
|
|
// 256kbits sram
|
|
case 0xe600: // BAN007
|
|
case 0x8eed: // BANC16
|
|
case 0xee90: // WIZC01
|
|
{
|
|
sdBuffer[11] = 0x02;
|
|
break;
|
|
}
|
|
// games missing 'COLOR' flag
|
|
case 0x26db: // SQRC01
|
|
case 0xbfdf: // SUMC07
|
|
case 0x50ca: // BANC09
|
|
case 0x9238: // BANC0E
|
|
case 0x04F1: // BANC1A
|
|
{
|
|
sdBuffer[7] |= 0x01;
|
|
break;
|
|
}
|
|
case 0x7f73: // BAN030
|
|
{
|
|
// missing developerId and cartId
|
|
sdBuffer[6] = 0x01;
|
|
sdBuffer[8] = 0x30;
|
|
break;
|
|
}
|
|
case 0xeafd: //BANC33
|
|
{
|
|
// enable GPIO and set to LOW
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xcc, 0x03);
|
|
writeByte_WSPort(0xcd, 0x00);
|
|
break;
|
|
}
|
|
case 0x0000:
|
|
{
|
|
// developerId/cartId/checksum are all filled with 0x00 in witch based games
|
|
dataIn_WS();
|
|
if (readWord_WS(0xf0000) == 0x4c45 && readWord_WS(0xf0002) == 0x5349 && readWord_WS(0xf0004) == 0x0041) {
|
|
// check witch BIOS
|
|
if (readWord_WS(0xfff5e) == 0x006c && readWord_WS(0xfff60) == 0x5b1b) {
|
|
// check flashchip
|
|
// should be a MBM29DL400TC
|
|
dataOut_WS();
|
|
writeWord_WS(0x80aaa, 0xaaaa);
|
|
writeWord_WS(0x80555, 0x5555);
|
|
writeWord_WS(0x80aaa, 0x9090);
|
|
|
|
dataIn_WS();
|
|
if (readWord_WS(0x80000) == 0x0004 && readWord_WS(0x80002) == 0x220c)
|
|
wsWitch = true;
|
|
|
|
dataOut_WS();
|
|
writeWord_WS(0x80000, 0xf0f0);
|
|
dataIn_WS();
|
|
|
|
// 7AC003
|
|
sdBuffer[6] = 0x7a;
|
|
sdBuffer[8] = 0x03;
|
|
}
|
|
// check service menu
|
|
else if (readWord_WS(0xfff22) == 0x006c && readWord_WS(0xfff24) == 0x5b1b) {
|
|
if (readWord_WS(0x93246) == 0x4a2f && readWord_WS(0x93248) == 0x5353 && readWord_WS(0x9324a) == 0x2e32) {
|
|
// jss2
|
|
sdBuffer[6] = 0xff; // WWGP
|
|
sdBuffer[8] = 0x1a; // 2001A
|
|
sdBuffer[7] = 0x01; // color only
|
|
sdBuffer[10] = 0x04; // size based on ROM chip capacity
|
|
|
|
if (readWord_WS(0x93e9c) == 0x4648 && readWord_WS(0x93e9e) == 0x0050) {
|
|
// WWGP2001A3 -> HFP Version
|
|
sdBuffer[9] = 0x03;
|
|
wsGameChecksum = 0x4870;
|
|
} else {
|
|
// TODO check other jss2 version
|
|
}
|
|
} else if (readWord_WS(0xe4260) == 0x6b64 && readWord_WS(0xe4262) == 0x696e) {
|
|
// dknight
|
|
sdBuffer[6] = 0xff; // WWGP
|
|
sdBuffer[8] = 0x2b; // 2002B
|
|
sdBuffer[7] = 0x01; // color only
|
|
sdBuffer[9] = 0x00;
|
|
sdBuffer[10] = 0x04; // size based on ROM chip (MR27V1602) capacity
|
|
wsGameChecksum = 0x8b1c;
|
|
}
|
|
}
|
|
} else if (sdBuffer[6] == 0x2a && sdBuffer[8] == 0x01 && sdBuffer[9] == 0x01) {
|
|
// Mobile WonderGate v1.1, checksum is filled with 0x0000
|
|
wsGameChecksum = 0x1da0;
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
romType = (sdBuffer[7] & 0x01); // wsc only = 1
|
|
romVersion = sdBuffer[9];
|
|
romSize = sdBuffer[10];
|
|
sramSize = sdBuffer[11];
|
|
wsGameOrientation = (sdBuffer[12] & 0x01);
|
|
wsGameHasRTC = (sdBuffer[13] & 0x01);
|
|
|
|
getDeveloperName_WS(sdBuffer[6], vendorID, 5);
|
|
snprintf(cartID, 5, "%c%02X", (romType ? 'C' : '0'), sdBuffer[8]);
|
|
snprintf(checksumStr, 5, "%04X", wsGameChecksum);
|
|
snprintf(romName, 17, "%s%s", vendorID, cartID);
|
|
|
|
switch (romSize) {
|
|
case 0x01: cartSize = 131072 * 2; break;
|
|
case 0x02: cartSize = 131072 * 4; break;
|
|
case 0x03: cartSize = 131072 * 8; break;
|
|
case 0x04: cartSize = 131072 * 16; break;
|
|
// case 0x05: cartSize = 131072 * 24; break;
|
|
case 0x06: cartSize = 131072 * 32; break;
|
|
// case 0x07: cartSize = 131072 * 48; break;
|
|
case 0x08: cartSize = 131072 * 64; break;
|
|
case 0x09: cartSize = 131072 * 128; break;
|
|
default: cartSize = 0; break;
|
|
}
|
|
|
|
switch (sramSize) {
|
|
case 0x00:
|
|
saveType = 0;
|
|
sramSize = 0;
|
|
break;
|
|
case 0x01:
|
|
saveType = 1;
|
|
sramSize = 64;
|
|
break;
|
|
case 0x02:
|
|
saveType = 1;
|
|
sramSize = 256;
|
|
break;
|
|
case 0x03:
|
|
saveType = 1;
|
|
sramSize = 1024;
|
|
break;
|
|
case 0x04:
|
|
saveType = 1;
|
|
sramSize = 2048;
|
|
break;
|
|
case 0x05:
|
|
saveType = 1;
|
|
sramSize = 4096;
|
|
break;
|
|
case 0x10:
|
|
saveType = 2;
|
|
sramSize = 1;
|
|
break;
|
|
case 0x20:
|
|
saveType = 2;
|
|
sramSize = 16;
|
|
break;
|
|
case 0x50:
|
|
saveType = 2;
|
|
sramSize = 8;
|
|
break;
|
|
default:
|
|
saveType = 0xff;
|
|
break;
|
|
}
|
|
|
|
if (saveType == 2)
|
|
unprotectEEPROM_WS();
|
|
|
|
// should be 0xea (JMPF instruction)
|
|
return sdBuffer[0];
|
|
}
|
|
|
|
static void showCartInfo_WS() {
|
|
display_Clear();
|
|
|
|
println_Msg(F("Cart Info"));
|
|
|
|
print_Msg(F("Game: "));
|
|
println_Msg(romName);
|
|
|
|
print_Msg(FS(FSTRING_ROM_SIZE));
|
|
if (cartSize == 0x00)
|
|
println_Msg(romSize, HEX);
|
|
else {
|
|
print_Msg((cartSize >> 17));
|
|
println_Msg(F(" Mb"));
|
|
}
|
|
|
|
print_Msg(F("Save: "));
|
|
switch (saveType) {
|
|
case 0: println_Msg(F("None")); break;
|
|
case 1:
|
|
print_Msg(F("Sram "));
|
|
print_Msg(sramSize);
|
|
println_Msg(F(" Kb"));
|
|
break;
|
|
case 2:
|
|
print_Msg(F("Eeprom "));
|
|
print_Msg(sramSize);
|
|
println_Msg(F(" Kb"));
|
|
break;
|
|
default: println_Msg(sramSize, HEX); break;
|
|
}
|
|
|
|
print_Msg(F("Version: 1."));
|
|
println_Msg(romVersion, HEX);
|
|
|
|
print_Msg(FS(FSTRING_CHECKSUM));
|
|
println_Msg(checksumStr);
|
|
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
static void getDeveloperName_WS(uint8_t id, char *buf, size_t length) {
|
|
if (buf == NULL)
|
|
return;
|
|
|
|
char *devName = NULL;
|
|
|
|
switch (id) {
|
|
case 0x01: devName = PSTR("BAN"); break;
|
|
case 0x02: devName = PSTR("TAT"); break;
|
|
case 0x03: devName = PSTR("TMY"); break;
|
|
case 0x04: devName = PSTR("KEX"); break;
|
|
case 0x05: devName = PSTR("DTE"); break;
|
|
case 0x06: devName = PSTR("AAE"); break;
|
|
case 0x07: devName = PSTR("MDE"); break;
|
|
case 0x08: devName = PSTR("NHB"); break;
|
|
case 0x0a: devName = PSTR("CCJ"); break;
|
|
case 0x0b: devName = PSTR("SUM"); break;
|
|
case 0x0c: devName = PSTR("SUN"); break;
|
|
case 0x0d: devName = PSTR("PAW"); break;
|
|
case 0x0e: devName = PSTR("BPR"); break;
|
|
case 0x10: devName = PSTR("JLC"); break;
|
|
case 0x11: devName = PSTR("MGA"); break;
|
|
case 0x12: devName = PSTR("KNM"); break;
|
|
case 0x16: devName = PSTR("KBS"); break;
|
|
case 0x17: devName = PSTR("BTM"); break;
|
|
case 0x18: devName = PSTR("KGT"); break;
|
|
case 0x19: devName = PSTR("SRV"); break;
|
|
case 0x1a: devName = PSTR("CFT"); break;
|
|
case 0x1b: devName = PSTR("MGH"); break;
|
|
case 0x1d: devName = PSTR("BEC"); break;
|
|
case 0x1e: devName = PSTR("NAP"); break;
|
|
case 0x1f: devName = PSTR("BVL"); break;
|
|
case 0x20: devName = PSTR("ATN"); break;
|
|
case 0x21: devName = PSTR("KDX"); break; // KDK for Memories of Festa?
|
|
case 0x22: devName = PSTR("HAL"); break;
|
|
case 0x23: devName = PSTR("YKE"); break;
|
|
case 0x24: devName = PSTR("OMM"); break;
|
|
case 0x25: devName = PSTR("LAY"); break;
|
|
case 0x26: devName = PSTR("KDK"); break;
|
|
case 0x27: devName = PSTR("SHL"); break;
|
|
case 0x28: devName = PSTR("SQR"); break;
|
|
case 0x2a: devName = PSTR("SCC"); break;
|
|
case 0x2b: devName = PSTR("TMC"); break;
|
|
case 0x2d: devName = PSTR("NMC"); break;
|
|
case 0x2e: devName = PSTR("SES"); break;
|
|
case 0x2f: devName = PSTR("HTR"); break;
|
|
case 0x31: devName = PSTR("VGD"); break;
|
|
case 0x33: devName = PSTR("WIZ"); break;
|
|
case 0x36: devName = PSTR("CPC"); break;
|
|
|
|
// custom developerId
|
|
case 0x7a: devName = PSTR("7AC"); break; // witch
|
|
case 0xff:
|
|
devName = PSTR("WWGP");
|
|
break; // WWGP series (jss2, dknight)
|
|
|
|
// if not found, use id
|
|
default: snprintf(buf, length, "%02X", id); return;
|
|
}
|
|
|
|
strlcpy_P(buf, devName, length);
|
|
}
|
|
|
|
static uint16_t readROM_WS(char *outPathBuf, size_t bufferSize) {
|
|
// generate fullname of rom file
|
|
snprintf(fileName, FILENAME_LENGTH, "%s.ws%c", romName, ((romType & 1) ? 'c' : '\0'));
|
|
|
|
// create a new folder for storing rom file
|
|
EEPROM_readAnything(0, foldern);
|
|
snprintf(folder, sizeof(folder), "WS/ROM/%s/%d", romName, foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
// filling output file path to buffer
|
|
if (outPathBuf != NULL && bufferSize > 0)
|
|
snprintf(outPathBuf, bufferSize, "%s/%s", folder, fileName);
|
|
|
|
printAndIncrementFolder(true);
|
|
|
|
// open file on sdcard
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT))
|
|
print_FatalError(create_file_STR);
|
|
|
|
// get correct starting rom bank
|
|
uint16_t bank = (256 - (cartSize >> 16));
|
|
uint32_t progress = 0;
|
|
uint16_t checksum = 0;
|
|
|
|
draw_progressbar(0, cartSize);
|
|
|
|
// start reading rom
|
|
for (; bank <= 0xff; bank++) {
|
|
// switch bank on segment 0x2
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc2, bank);
|
|
|
|
// blink LED on cartridge (only for BANC33)
|
|
if (wsGameChecksum == 0xeafd)
|
|
writeByte_WSPort(0xcd, (bank & 0x03));
|
|
|
|
dataIn_WS();
|
|
for (uint32_t addr = 0; addr < 0x10000; addr += 512) {
|
|
// blink LED
|
|
if ((addr & ((1 << 14) - 1)) == 0)
|
|
blinkLED();
|
|
|
|
for (uint32_t w = 0; w < 512; w += 2) {
|
|
*((uint16_t *)(sdBuffer + w)) = readWord_WS(0x20000 + addr + w);
|
|
|
|
// only calculate last two banks of checksum (os and bios region)
|
|
if (wsWitch && bank < 0xfe)
|
|
continue;
|
|
|
|
// skip last two bytes of rom (checksum value)
|
|
if (w == 510 && progress == cartSize - 512)
|
|
continue;
|
|
|
|
checksum += sdBuffer[w];
|
|
checksum += sdBuffer[w + 1];
|
|
}
|
|
|
|
myFile.write(sdBuffer, 512);
|
|
progress += 512;
|
|
}
|
|
|
|
draw_progressbar(progress, cartSize);
|
|
}
|
|
|
|
myFile.close();
|
|
|
|
// turn off LEDs (only for BANC33)
|
|
if (wsGameChecksum == 0xeafd) {
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xcd, 0x00);
|
|
}
|
|
|
|
return checksum;
|
|
}
|
|
|
|
static void readSRAM_WS() {
|
|
// generate fullname of rom file
|
|
createFolderAndOpenFile("WS", "SAVE", romName, "save");
|
|
|
|
uint32_t bank_size = (sramSize << 7);
|
|
uint16_t end_bank = (bank_size >> 16); // 64KB per bank
|
|
|
|
if (bank_size > 0x10000)
|
|
bank_size = 0x10000;
|
|
|
|
uint16_t bank = 0;
|
|
|
|
do {
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc1, bank);
|
|
|
|
dataIn_WS();
|
|
for (uint32_t addr = 0; addr < bank_size; addr += 512) {
|
|
// blink LED
|
|
if ((addr & ((1 << 14) - 1)) == 0)
|
|
blinkLED();
|
|
|
|
// SRAM data on D0-D7, with A-1 to select high/low byte
|
|
for (uint32_t w = 0; w < 512; w++)
|
|
sdBuffer[w] = readByte_WS(0x10000 + addr + w);
|
|
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
} while (++bank < end_bank);
|
|
|
|
myFile.close();
|
|
|
|
print_STR(done_STR, 1);
|
|
display_Update();
|
|
}
|
|
|
|
static void verifySRAM_WS() {
|
|
print_Msg(F("Verifying... "));
|
|
display_Update();
|
|
|
|
if (myFile.open(filePath, O_READ)) {
|
|
uint32_t bank_size = (sramSize << 7);
|
|
uint16_t end_bank = (bank_size >> 16); // 64KB per bank
|
|
uint16_t bank = 0;
|
|
uint32_t write_errors = 0;
|
|
|
|
if (bank_size > 0x10000)
|
|
bank_size = 0x10000;
|
|
|
|
do {
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc1, bank);
|
|
|
|
dataIn_WS();
|
|
for (uint32_t addr = 0; addr < bank_size && myFile.available(); addr += 512) {
|
|
myFile.read(sdBuffer, 512);
|
|
|
|
// SRAM data on D0-D7, with A-1 to select high/low byte
|
|
for (uint32_t w = 0; w < 512; w++) {
|
|
if (readByte_WS(0x10000 + addr + w) != sdBuffer[w])
|
|
write_errors++;
|
|
}
|
|
}
|
|
} while (++bank < end_bank);
|
|
|
|
myFile.close();
|
|
|
|
if (write_errors == 0) {
|
|
println_Msg(F("passed"));
|
|
} else {
|
|
println_Msg(F("failed"));
|
|
print_STR(error_STR, 0);
|
|
print_Msg(write_errors);
|
|
print_STR(_bytes_STR, 1);
|
|
print_Error(did_not_verify_STR);
|
|
}
|
|
} else {
|
|
print_Error(FS(FSTRING_FILE_DOESNT_EXIST));
|
|
}
|
|
}
|
|
|
|
static void writeSRAM_WS() {
|
|
filePath[0] = 0;
|
|
sd.chdir("/");
|
|
fileBrowser(F("Select sav file"));
|
|
snprintf(filePath, FILEPATH_LENGTH, "%s/%s", filePath, fileName);
|
|
|
|
display_Clear();
|
|
print_Msg(F("Writing "));
|
|
print_Msg(filePath);
|
|
println_Msg(F("..."));
|
|
display_Update();
|
|
|
|
if (myFile.open(filePath, O_READ)) {
|
|
uint32_t bank_size = (sramSize << 7);
|
|
uint16_t end_bank = (bank_size >> 16); // 64KB per bank
|
|
|
|
if (bank_size > 0x10000)
|
|
bank_size = 0x10000;
|
|
|
|
uint16_t bank = 0;
|
|
dataOut_WS();
|
|
do {
|
|
writeByte_WSPort(0xc1, bank);
|
|
|
|
for (uint32_t addr = 0; addr < bank_size && myFile.available(); addr += 512) {
|
|
// blink LED
|
|
if ((addr & ((1 << 14) - 1)) == 0)
|
|
blinkLED();
|
|
|
|
myFile.read(sdBuffer, 512);
|
|
|
|
// SRAM data on D0-D7, with A-1 to select high/low byte
|
|
for (uint32_t w = 0; w < 512; w++)
|
|
writeByte_WS(0x10000 + addr + w, sdBuffer[w]);
|
|
}
|
|
} while (++bank < end_bank);
|
|
|
|
myFile.close();
|
|
|
|
println_Msg(F("Writing finished"));
|
|
display_Update();
|
|
} else {
|
|
print_Error(FS(FSTRING_FILE_DOESNT_EXIST));
|
|
}
|
|
}
|
|
|
|
static void readEEPROM_WS() {
|
|
// generate fullname of eep file
|
|
createFolderAndOpenFile("WS", "SAVE", romName, "eep");
|
|
|
|
uint32_t eepromSize = (sramSize << 7);
|
|
uint32_t bufSize = (eepromSize < 512 ? eepromSize : 512);
|
|
|
|
for (uint32_t i = 0; i < eepromSize; i += bufSize) {
|
|
for (uint32_t j = 0; j < bufSize; j += 2) {
|
|
// blink LED
|
|
if ((j & 0x1f) == 0x00)
|
|
blinkLED();
|
|
|
|
generateEepromInstruction_WS(wsEepromShiftReg, 0x2, ((i + j) >> 1));
|
|
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc6, wsEepromShiftReg[0]);
|
|
writeByte_WSPort(0xc7, wsEepromShiftReg[1]);
|
|
writeByte_WSPort(0xc8, 0x10);
|
|
|
|
// MMC will shift out from port 0xc7 to 0xc6
|
|
// and shift in 16bits into port 0xc5 to 0xc4
|
|
pulseCLK_WS(1 + 32 + 3);
|
|
|
|
dataIn_WS();
|
|
sdBuffer[j] = readByte_WSPort(0xc4);
|
|
sdBuffer[j + 1] = readByte_WSPort(0xc5);
|
|
}
|
|
|
|
myFile.write(sdBuffer, bufSize);
|
|
}
|
|
|
|
myFile.close();
|
|
|
|
print_STR(done_STR, 1);
|
|
}
|
|
|
|
static void verifyEEPROM_WS() {
|
|
print_Msg(F("Verifying... "));
|
|
display_Update();
|
|
|
|
if (myFile.open(filePath, O_READ)) {
|
|
uint32_t write_errors = 0;
|
|
uint32_t eepromSize = (sramSize << 7);
|
|
uint32_t bufSize = (eepromSize < 512 ? eepromSize : 512);
|
|
|
|
for (uint32_t i = 0; i < eepromSize; i += bufSize) {
|
|
myFile.read(sdBuffer, bufSize);
|
|
|
|
for (uint32_t j = 0; j < bufSize; j += 2) {
|
|
// blink LED
|
|
if ((j & 0x1f) == 0x00)
|
|
blinkLED();
|
|
|
|
generateEepromInstruction_WS(wsEepromShiftReg, 0x2, ((i + j) >> 1));
|
|
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc6, wsEepromShiftReg[0]);
|
|
writeByte_WSPort(0xc7, wsEepromShiftReg[1]);
|
|
writeByte_WSPort(0xc8, 0x10);
|
|
|
|
// MMC will shift out from port 0xc7 to 0xc6
|
|
// and shift in 16bits into port 0xc5 to 0xc4
|
|
pulseCLK_WS(1 + 32 + 3);
|
|
|
|
dataIn_WS();
|
|
if (readByte_WSPort(0xc4) != sdBuffer[j])
|
|
write_errors++;
|
|
|
|
if (readByte_WSPort(0xc5) != sdBuffer[j + 1])
|
|
write_errors++;
|
|
}
|
|
}
|
|
|
|
myFile.close();
|
|
|
|
if (write_errors == 0) {
|
|
println_Msg(F("passed"));
|
|
} else {
|
|
println_Msg(F("failed"));
|
|
print_STR(error_STR, 0);
|
|
print_Msg(write_errors);
|
|
print_STR(_bytes_STR, 1);
|
|
print_Error(did_not_verify_STR);
|
|
}
|
|
} else {
|
|
print_Error(FS(FSTRING_FILE_DOESNT_EXIST));
|
|
}
|
|
}
|
|
|
|
static void writeEEPROM_WS() {
|
|
filePath[0] = 0;
|
|
sd.chdir("/");
|
|
fileBrowser(F("Select eep file"));
|
|
snprintf(filePath, FILEPATH_LENGTH, "%s/%s", filePath, fileName);
|
|
|
|
display_Clear();
|
|
print_Msg(F("Writing "));
|
|
print_Msg(filePath);
|
|
println_Msg(F("..."));
|
|
display_Update();
|
|
|
|
if (myFile.open(filePath, O_READ)) {
|
|
uint32_t eepromSize = (sramSize << 7);
|
|
uint32_t bufSize = (eepromSize < 512 ? eepromSize : 512);
|
|
|
|
for (uint32_t i = 0; i < eepromSize; i += bufSize) {
|
|
myFile.read(sdBuffer, bufSize);
|
|
|
|
for (uint32_t j = 0; j < bufSize; j += 2) {
|
|
// blink LED
|
|
if ((j & 0x1f) == 0x00)
|
|
blinkLED();
|
|
|
|
generateEepromInstruction_WS(wsEepromShiftReg, 0x1, ((i + j) >> 1));
|
|
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc6, wsEepromShiftReg[0]);
|
|
writeByte_WSPort(0xc7, wsEepromShiftReg[1]);
|
|
writeByte_WSPort(0xc4, sdBuffer[j]);
|
|
writeByte_WSPort(0xc5, sdBuffer[j + 1]);
|
|
writeByte_WSPort(0xc8, 0x20);
|
|
|
|
// MMC will shift out from port 0xc7 to 0xc4
|
|
pulseCLK_WS(1 + 32 + 3);
|
|
|
|
dataIn_WS();
|
|
do {
|
|
pulseCLK_WS(128);
|
|
} while ((readByte_WSPort(0xc8) & 0x02) == 0x00);
|
|
}
|
|
}
|
|
|
|
myFile.close();
|
|
|
|
print_STR(done_STR, 1);
|
|
} else {
|
|
print_Error(FS(FSTRING_FILE_DOESNT_EXIST));
|
|
}
|
|
}
|
|
|
|
static void writeWitchOS_WS() {
|
|
// make sure that OS sectors not protected
|
|
dataOut_WS();
|
|
writeWord_WS(0x80aaa, 0xaaaa);
|
|
writeWord_WS(0x80555, 0x5555);
|
|
writeWord_WS(0xe0aaa, 0x9090);
|
|
|
|
dataIn_WS();
|
|
if (readWord_WS(0xe0004) || readWord_WS(0xe4004) || readWord_WS(0xec004) || readWord_WS(0xee004)) {
|
|
display_Clear();
|
|
print_Error(F("OS sectors are protected!"));
|
|
} else {
|
|
filePath[0] = 0;
|
|
sd.chdir("/");
|
|
fileBrowser(F("Select fbin file"));
|
|
snprintf(filePath, FILEPATH_LENGTH, "%s/%s", filePath, fileName);
|
|
|
|
display_Clear();
|
|
|
|
if (myFile.open(filePath, O_READ)) {
|
|
println_Msg(F("Erasing OS..."));
|
|
display_Update();
|
|
eraseWitchFlashSector_WS(0xe0000);
|
|
eraseWitchFlashSector_WS(0xe4000);
|
|
eraseWitchFlashSector_WS(0xec000);
|
|
eraseWitchFlashSector_WS(0xee000);
|
|
|
|
print_Msg(F("Flashing OS "));
|
|
print_Msg(filePath);
|
|
println_Msg(F("..."));
|
|
display_Update();
|
|
|
|
uint32_t fbin_length = myFile.fileSize();
|
|
uint32_t i, bytes_read;
|
|
uint16_t pd;
|
|
uint8_t key;
|
|
|
|
// OS size seems limit to 64KBytes
|
|
// last 16 bytes contains jmpf code and block count (written by BIOS)
|
|
if (fbin_length > 65520)
|
|
fbin_length = 65520;
|
|
|
|
// enter fast program mode
|
|
dataOut_WS();
|
|
writeWord_WS(0x80aaa, 0xaaaa);
|
|
writeWord_WS(0x80555, 0x5555);
|
|
writeWord_WS(0x80aaa, 0x2020);
|
|
|
|
// 128bytes per block
|
|
for (i = 0; i < fbin_length; i += 128) {
|
|
// blink LED
|
|
if ((i & 0x3ff) == 0)
|
|
blinkLED();
|
|
|
|
// reset key
|
|
key = 0xff;
|
|
bytes_read = myFile.read(sdBuffer, 128);
|
|
|
|
for (uint32_t j = 0; j < bytes_read; j += 2) {
|
|
// for each decoded[n] = encoded[n] ^ key
|
|
// where key = encoded[n - 1]
|
|
// key = 0xff when n = 0, 0 <= n < 128
|
|
pd = ((sdBuffer[j] ^ key) | ((sdBuffer[j + 1] ^ sdBuffer[j]) << 8));
|
|
key = sdBuffer[j + 1];
|
|
|
|
fastProgramWitchFlash_WS(0xe0000 + i + j, pd);
|
|
}
|
|
}
|
|
|
|
// write jmpf instruction and block counts at 0xe0000
|
|
memcpy_P(sdBuffer, wwLaunchCode, 8);
|
|
*((uint16_t *)(sdBuffer + 6)) = ((i >> 7) & 0xffff);
|
|
|
|
for (uint32_t i = 0; i < 8; i += 2)
|
|
fastProgramWitchFlash_WS(0xefff0 + i, *((uint16_t *)(sdBuffer + i)));
|
|
|
|
// leave fast program mode
|
|
dataOut_WS();
|
|
writeWord_WS(0xe0000, 0x9090);
|
|
writeWord_WS(0xe0000, 0xf0f0);
|
|
|
|
myFile.close();
|
|
|
|
print_STR(done_STR, 1);
|
|
} else {
|
|
print_Error(FS(FSTRING_FILE_DOESNT_EXIST));
|
|
}
|
|
}
|
|
|
|
dataOut_WS();
|
|
writeWord_WS(0x80000, 0xf0f0);
|
|
}
|
|
|
|
static void fastProgramWitchFlash_WS(uint32_t addr, uint16_t data) {
|
|
dataOut_WS();
|
|
|
|
writeWord_WS(addr, 0xa0a0);
|
|
writeWord_WS(addr, data);
|
|
|
|
dataIn_WS();
|
|
while (readWord_WS(addr) != data)
|
|
;
|
|
}
|
|
|
|
static void eraseWitchFlashSector_WS(uint32_t sector_addr) {
|
|
// blink LED
|
|
blinkLED();
|
|
|
|
dataOut_WS();
|
|
writeWord_WS(0x80aaa, 0xaaaa);
|
|
writeWord_WS(0x80555, 0x5555);
|
|
writeWord_WS(0x80aaa, 0x8080);
|
|
writeWord_WS(0x80aaa, 0xaaaa);
|
|
writeWord_WS(0x80555, 0x5555);
|
|
writeWord_WS(sector_addr, 0x3030);
|
|
|
|
dataIn_WS();
|
|
while ((readWord_WS(sector_addr) & 0x0080) == 0x0000)
|
|
;
|
|
}
|
|
|
|
static boolean compareChecksum_WS(uint16_t checksum) {
|
|
char result[11];
|
|
snprintf(result, 11, "%04X(%04X)", wsGameChecksum, checksum);
|
|
print_Msg(F("Result: "));
|
|
print_Msg(result);
|
|
|
|
if (checksum == wsGameChecksum) {
|
|
println_Msg(F(" matches."));
|
|
|
|
// Compare CRC32 to database and rename ROM if found
|
|
// Arguments: database name, precalculated crc string or 0 to calculate, rename rom or not, starting offset
|
|
compareCRC("ws.txt", 0, 1, 0);
|
|
|
|
return 1;
|
|
} else {
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
print_Error(F("Checksum Error"));
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void writeByte_WSPort(uint8_t port, uint8_t data) {
|
|
PORTF = (port & 0x0f);
|
|
PORTL = (port >> 4);
|
|
|
|
// switch CART(PH3), MMC(PH4) to LOW
|
|
PORTH &= ~((1 << 3) | (1 << 4));
|
|
|
|
// set data
|
|
PORTC = data;
|
|
|
|
// switch WE(PH5) to LOW
|
|
PORTH &= ~(1 << 5);
|
|
NOP;
|
|
|
|
// switch WE(PH5) to HIGH
|
|
PORTH |= (1 << 5);
|
|
NOP;
|
|
NOP;
|
|
|
|
// switch CART(PH3), MMC(PH4) to HIGH
|
|
PORTH |= ((1 << 3) | (1 << 4));
|
|
}
|
|
|
|
static uint8_t readByte_WSPort(uint8_t port) {
|
|
PORTF = (port & 0x0f);
|
|
PORTL = (port >> 4);
|
|
|
|
// switch CART(PH3), MMC(PH4) to LOW
|
|
PORTH &= ~((1 << 3) | (1 << 4));
|
|
|
|
// switch OE(PH6) to LOW
|
|
PORTH &= ~(1 << 6);
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
uint8_t ret = PINC;
|
|
|
|
// switch OE(PH6) to HIGH
|
|
PORTH |= (1 << 6);
|
|
|
|
// switch CART(PH3), MMC(PH4) to HIGH
|
|
PORTH |= ((1 << 3) | (1 << 4));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void writeWord_WS(uint32_t addr, uint16_t data) {
|
|
PORTF = addr & 0xff;
|
|
PORTK = (addr >> 8) & 0xff;
|
|
PORTL = (addr >> 16) & 0x0f;
|
|
|
|
PORTC = data & 0xff;
|
|
PORTA = (data >> 8);
|
|
|
|
// switch CART(PH3) and WE(PH5) to LOW
|
|
PORTH &= ~((1 << 3) | (1 << 5));
|
|
NOP;
|
|
|
|
// switch CART(PH3) and WE(PH5) to HIGH
|
|
PORTH |= (1 << 3) | (1 << 5);
|
|
NOP;
|
|
NOP;
|
|
}
|
|
|
|
static uint16_t readWord_WS(uint32_t addr) {
|
|
PORTF = addr & 0xff;
|
|
PORTK = (addr >> 8) & 0xff;
|
|
PORTL = (addr >> 16) & 0x0f;
|
|
|
|
// switch CART(PH3) and OE(PH6) to LOW
|
|
PORTH &= ~((1 << 3) | (1 << 6));
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
uint16_t ret = ((PINA << 8) | PINC);
|
|
|
|
// switch CART(PH3) and OE(PH6) to HIGH
|
|
PORTH |= (1 << 3) | (1 << 6);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void writeByte_WS(uint32_t addr, uint8_t data) {
|
|
PORTF = addr & 0xff;
|
|
PORTK = (addr >> 8) & 0xff;
|
|
PORTL = (addr >> 16) & 0x0f;
|
|
|
|
PORTC = data;
|
|
|
|
// switch CART(PH3) and WE(PH5) to LOW
|
|
PORTH &= ~((1 << 3) | (1 << 5));
|
|
NOP;
|
|
|
|
// switch CART(PH3) and WE(PH5) to HIGH
|
|
PORTH |= (1 << 3) | (1 << 5);
|
|
NOP;
|
|
NOP;
|
|
}
|
|
|
|
static uint8_t readByte_WS(uint32_t addr) {
|
|
PORTF = addr & 0xff;
|
|
PORTK = (addr >> 8) & 0xff;
|
|
PORTL = (addr >> 16) & 0x0f;
|
|
|
|
// switch CART(PH3) and OE(PH6) to LOW
|
|
PORTH &= ~((1 << 3) | (1 << 6));
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
uint8_t ret = PINC;
|
|
|
|
// switch CART(PH3) and OE(PH6) to HIGH
|
|
PORTH |= (1 << 3) | (1 << 6);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void unprotectEEPROM_WS() {
|
|
generateEepromInstruction_WS(wsEepromShiftReg, 0x0, 0x3);
|
|
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc6, wsEepromShiftReg[0]);
|
|
writeByte_WSPort(0xc7, wsEepromShiftReg[1]);
|
|
writeByte_WSPort(0xc8, 0x40);
|
|
|
|
// MMC will shift out port 0xc7 to 0xc6 to EEPROM
|
|
pulseCLK_WS(1 + 16 + 3);
|
|
}
|
|
|
|
// generate data for port 0xc6 to 0xc7
|
|
// number of CLK pulses needed for each instruction is 1 + (16 or 32) + 3
|
|
static void generateEepromInstruction_WS(uint8_t *instruction, uint8_t opcode, uint16_t addr) {
|
|
uint8_t addr_bits = (sramSize > 1 ? 10 : 6);
|
|
uint16_t *ptr = (uint16_t *)instruction;
|
|
*ptr = 0x0001; // initial with a start bit
|
|
|
|
if (opcode == 0) {
|
|
// 2bits opcode = 0x00
|
|
*ptr <<= 2;
|
|
// 2bits ext cmd (from addr)
|
|
*ptr <<= 2;
|
|
*ptr |= (addr & 0x0003);
|
|
*ptr <<= (addr_bits - 2);
|
|
} else {
|
|
// 2bits opcode
|
|
*ptr <<= 2;
|
|
*ptr |= (opcode & 0x03);
|
|
// address bits
|
|
*ptr <<= addr_bits;
|
|
*ptr |= (addr & ((1 << addr_bits) - 1));
|
|
}
|
|
}
|
|
|
|
// 2003 MMC need to be unlock,
|
|
// or it will reject all reading and bank switching
|
|
// All signals' timing are analyzed by using LogicAnalyzer
|
|
static boolean unlockMMC2003_WS() {
|
|
// initialize all control pin state
|
|
// RST(PH0) and CLK(PE3or5) to LOW
|
|
// CART(PH3) MMC(PH4) WE(PH5) OE(PH6) to HIGH
|
|
PORTH &= ~(1 << 0);
|
|
PORTE &= ~(1 << WS_CLK_BIT);
|
|
PORTH |= ((1 << 3) | (1 << 4) | (1 << 5) | (1 << 6));
|
|
|
|
// switch RST(PH0) to HIGH
|
|
PORTH |= (1 << 0);
|
|
|
|
PORTF = 0x0a;
|
|
PORTL = 0x05;
|
|
pulseCLK_WS(3);
|
|
|
|
PORTF = 0x05;
|
|
PORTL = 0x0a;
|
|
pulseCLK_WS(4);
|
|
|
|
// MMC is outputing something on IO? pin synchronized with CLK
|
|
// so still need to pulse CLK until MMC is ok to work
|
|
pulseCLK_WS(18);
|
|
|
|
// unlock procedure finished
|
|
// see if we can set bank number to MMC
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc2, 0xaa);
|
|
writeByte_WSPort(0xc3, 0x55);
|
|
|
|
dataIn_WS();
|
|
if (readByte_WSPort(0xc2) == 0xaa && readByte_WSPort(0xc3) == 0x55) {
|
|
// now set initial bank number to MMC
|
|
dataOut_WS();
|
|
writeByte_WSPort(0xc0, 0x2f);
|
|
writeByte_WSPort(0xc1, 0x3f);
|
|
writeByte_WSPort(0xc2, 0xff);
|
|
writeByte_WSPort(0xc3, 0xff);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
// doing a L->H on CLK pin
|
|
static void pulseCLK_WS(uint8_t count) {
|
|
register uint8_t tic;
|
|
|
|
// about 384KHz, 50% duty cycle
|
|
asm volatile("L0_%=:\n\t"
|
|
"cpi %[count], 0\n\t"
|
|
"breq L3_%=\n\t"
|
|
"dec %[count]\n\t"
|
|
"cbi %[porte], %[ws_clk_bit]\n\t"
|
|
"ldi %[tic], 6\n\t"
|
|
"L1_%=:\n\t"
|
|
"dec %[tic]\n\t"
|
|
"brne L1_%=\n\t"
|
|
"sbi %[porte], %[ws_clk_bit]\n\t"
|
|
"ldi %[tic], 5\n\t"
|
|
"L2_%=:\n\t"
|
|
"dec %[tic]\n\t"
|
|
"brne L2_%=\n\t"
|
|
"rjmp L0_%=\n\t"
|
|
"L3_%=:\n\t"
|
|
: [tic] "=a"(tic)
|
|
: [count] "a"(count), [porte] "I"(_SFR_IO_ADDR(PORTE)), [ws_clk_bit] "I"(WS_CLK_BIT));
|
|
}
|
|
|
|
static void dataIn_WS() {
|
|
DDRC = 0x00;
|
|
DDRA = 0x00;
|
|
|
|
// some game's ROM chip needs internal-pullup be disabled to work properly
|
|
// ex: Mobile Suit Gundam Vol.2 - JABURO (MX23L6410MC-12 Mask ROM)
|
|
PORTC = 0x00;
|
|
PORTA = 0x00;
|
|
}
|
|
|
|
static void dataOut_WS() {
|
|
DDRC = 0xff;
|
|
DDRA = 0xff;
|
|
}
|
|
|
|
#endif
|
|
//******************************************
|
|
// End of File
|
|
//******************************************
|