mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-27 05:21:53 +01:00
2cf7f5dbe7
The `setVoltage()` function should be called even when `ENABLE_VSELECT` is disabled because `ENABLE_3V3FIX` also uses it. There is no resource cost to do this as when both options are disabled the compiler will optimize this function out. This just "future proofs" the code so if that function ever does more it doesn't need updated everywhere. This applies to `setup_FlashVoltage()` as well. The changes to OSCR.cpp are just for code formatting and additional comments to clarify this.
574 lines
15 KiB
C++
574 lines
15 KiB
C++
//******************************************
|
|
// VIRTUALBOY MODULE
|
|
//******************************************
|
|
#ifdef enable_VBOY
|
|
// Nintendo VirtualBoy
|
|
// Cartridge Pinout
|
|
// 60P 2.00mm pitch connector
|
|
//
|
|
// TOP SIDE BOTTOM SIDE
|
|
// +-------+
|
|
// GND -| 1 2 |- GND
|
|
// /WE0 (SRAM WRITE ENABLE) -| 3 4 |- nc
|
|
// nc -| 5 6 |- /CS1 (SRAM ENABLE)
|
|
// CS2 (SRAM) -| 7 8 |- VCC(+5V)
|
|
// nc -| 9 10 |- A23
|
|
// A19 -| 11 12 |- A22
|
|
// A18 -| 13 14 |- A21
|
|
// A8 -| 15 16 |- A20
|
|
// A7 -| 17 18 |- A9
|
|
// A6 -| 19 20 |- A10
|
|
// A5 -| 21 22 |- A11
|
|
// A4 -| 23 24 |- A12
|
|
// A3 -| 25 26 |- A13
|
|
// A2 -| 27 28 |- A14
|
|
// A1 -| 29 30 |- A15
|
|
// /CE (ROM) -| 31 32 |- A16
|
|
// GND -| 33 34 |- A17
|
|
// /OE -| 35 36 |- VCC(+5V)
|
|
// D8 -| 37 38 |- D7
|
|
// D0 -| 39 40 |- D15
|
|
// D9 -| 41 42 |- D6
|
|
// D1 -| 43 44 |- D14
|
|
// D10 -| 45 46 |- D5
|
|
// D2 -| 47 48 |- D13
|
|
// D11 -| 49 50 |- D4
|
|
// D3 -| 51 52 |- D12
|
|
// VCC(+5V) -| 53 54 |- VCC(+5V)
|
|
// nc -| 55 56 |- nc
|
|
// nc -| 57 58 |- nc
|
|
// GND -| 59 60 |- GND
|
|
// +-------+
|
|
//
|
|
|
|
// CONTROL PINS:
|
|
// CS2(SRAM) - (PH0) - VBOY PIN 7 - SNES RST
|
|
// /CE(ROM) - (PH3) - VBOY PIN 31 - SNES /CS
|
|
// /CS1(SRAM ENABLE) - (PH4) - VBOY PIN 6 - SNES /IRQ
|
|
// /WE0(SRAM WRITE ENABLE) - (PH5) - VBOY PIN 3 - SNES /WR
|
|
// /OE - (PH6) - VBOY PIN 35 - SNES /RD
|
|
|
|
// NOT CONNECTED:
|
|
// CLK(PH1) - N/C
|
|
|
|
//******************************************
|
|
// SETUP
|
|
//******************************************
|
|
|
|
void setup_VBOY() {
|
|
// Request 5V
|
|
setVoltage(VOLTS_SET_5V);
|
|
|
|
// Set Address Pins to Output
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// CS2(PH0) ---(PH1) /CE(PH3) /CS1(PH4) /WE0(PH5) /OE(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D15) to Input
|
|
DDRC = 0x00;
|
|
DDRA = 0x00;
|
|
|
|
// Setting Control Pins to HIGH
|
|
// ---(PH1) /CE(PH3) /CS1(PH4) /WE0(PH5) /OE(PH6)
|
|
PORTH |= (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
// Set CS2(PH0) to LOW
|
|
PORTH &= ~(1 << 0);
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
getCartInfo_VB();
|
|
|
|
mode = mode_VBOY;
|
|
}
|
|
|
|
//******************************************
|
|
// MENU
|
|
//******************************************
|
|
|
|
// Base Menu
|
|
static const char vboyMenuItem1[] PROGMEM = "Read ROM";
|
|
static const char vboyMenuItem2[] PROGMEM = "Read SRAM";
|
|
static const char vboyMenuItem3[] PROGMEM = "Write SRAM";
|
|
//static const char vboyMenuItem4[] PROGMEM = "Reset"; (stored in common strings array)
|
|
static const char* const menuOptionsVBOY[] PROGMEM = { vboyMenuItem1, vboyMenuItem2, vboyMenuItem3, string_reset2 };
|
|
|
|
void vboyMenu() {
|
|
convertPgm(menuOptionsVBOY, 4);
|
|
uint8_t mainMenu = question_box(F("VIRTUALBOY MENU"), menuOptions, 4, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_VB();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 1:
|
|
// Read SRAM
|
|
if (sramSize) {
|
|
sd.chdir("/");
|
|
display_Clear();
|
|
println_Msg(F("Reading SRAM..."));
|
|
display_Update();
|
|
readSRAM_VB();
|
|
sd.chdir("/");
|
|
} else {
|
|
print_Error(F("Cart has no SRAM"));
|
|
}
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
// Wait for user input
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
#endif
|
|
break;
|
|
|
|
case 2:
|
|
// Write SRAM
|
|
if (sramSize) {
|
|
// Change working dir to root
|
|
sd.chdir("/");
|
|
fileBrowser(F("Select SRM file"));
|
|
display_Clear();
|
|
writeSRAM_VB();
|
|
writeErrors = verifySRAM_VB();
|
|
if (writeErrors == 0) {
|
|
println_Msg(F("SRAM verified OK"));
|
|
display_Update();
|
|
} else {
|
|
print_STR(error_STR, 0);
|
|
print_Msg(writeErrors);
|
|
print_STR(_bytes_STR, 1);
|
|
print_Error(did_not_verify_STR);
|
|
}
|
|
} else {
|
|
print_Error(F("Cart has no SRAM"));
|
|
}
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
// Wait for user input
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
#endif
|
|
break;
|
|
|
|
case 3:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// LOW LEVEL FUNCTIONS
|
|
//******************************************
|
|
|
|
void writeByte_VB(unsigned long myAddress, byte myData) {
|
|
PORTF = myAddress & 0xFF;
|
|
PORTK = (myAddress >> 8) & 0xFF;
|
|
PORTL = (myAddress >> 16) & 0xFF;
|
|
|
|
__asm__("nop\n\t");
|
|
|
|
PORTA = myData;
|
|
|
|
// Set CS2(PH0), /CE(PH3), /OE(PH6) to HIGH
|
|
PORTH |= (1 << 0) | (1 << 3) | (1 << 6);
|
|
// Set /CS1(PH4), /WE0(PH5) to LOW
|
|
PORTH &= ~(1 << 4) & ~(1 << 5);
|
|
|
|
__asm__("nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t");
|
|
|
|
// Set CS2(PH0), /CS1(PH4), /WE0(PH5) to HIGH
|
|
PORTH |= (1 << 0) | (1 << 4) | (1 << 5);
|
|
|
|
__asm__("nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t");
|
|
}
|
|
|
|
word readWord_VB(unsigned long myAddress) {
|
|
PORTF = myAddress & 0xFF;
|
|
PORTK = (myAddress >> 8) & 0xFF;
|
|
PORTL = (myAddress >> 16) & 0xFF;
|
|
|
|
__asm__("nop\n\t");
|
|
|
|
// Set CS2(PH0), /CS1(PH4), /WE0(PH5) to HIGH
|
|
PORTH |= (1 << 0) | (1 << 4) | (1 << 5);
|
|
// Set /CE(PH3), /OE(PH6) to LOW
|
|
PORTH &= ~(1 << 3) & ~(1 << 6);
|
|
|
|
__asm__("nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t");
|
|
|
|
word tempWord = ((PINA & 0xFF) << 8) | (PINC & 0xFF);
|
|
|
|
// Set /CE(PH3), /OE(PH6) to HIGH
|
|
PORTH |= (1 << 3) | (1 << 6);
|
|
// Setting CS2(PH0) LOW
|
|
PORTH &= ~(1 << 0);
|
|
|
|
__asm__("nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t");
|
|
|
|
return tempWord;
|
|
}
|
|
|
|
byte readByte_VB(unsigned long myAddress) { // SRAM BYTE
|
|
PORTF = myAddress & 0xFF;
|
|
PORTK = (myAddress >> 8) & 0xFF;
|
|
PORTL = (myAddress >> 16) & 0xFF;
|
|
|
|
__asm__("nop\n\t");
|
|
|
|
// Set CS2(PH0), /CE(PH3), /WE0(PH5) to HIGH
|
|
PORTH |= (1 << 0) | (1 << 3) | (1 << 5);
|
|
// Set /CS1(PH4), /OE(PH6) to LOW
|
|
PORTH &= ~(1 << 4) & ~(1 << 6);
|
|
|
|
__asm__("nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t");
|
|
|
|
byte tempByte = PINA;
|
|
|
|
__asm__("nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t");
|
|
|
|
// Set /CS1(PH4), /OE(PH6) to HIGH
|
|
PORTH |= (1 << 3) | (1 << 6);
|
|
// Setting CS2(PH0) LOW
|
|
PORTH &= ~(1 << 0);
|
|
|
|
__asm__("nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t"
|
|
"nop\n\t");
|
|
|
|
return tempByte;
|
|
}
|
|
|
|
// Switch data pins to write
|
|
void dataOut_VB() {
|
|
DDRC = 0xFF;
|
|
DDRA = 0xFF;
|
|
}
|
|
|
|
// Switch data pins to read
|
|
void dataIn_VB() {
|
|
DDRC = 0x00;
|
|
DDRA = 0x00;
|
|
}
|
|
|
|
//******************************************
|
|
// CART INFO
|
|
//******************************************
|
|
|
|
void getCartInfo_VB() {
|
|
// Set control
|
|
dataIn_VB();
|
|
|
|
cartSize = 0;
|
|
for (unsigned long address = 0x80000; address <= 0x400000; address *= 2) {
|
|
// Get Serial
|
|
word vbSerial = readWord_VB((address - 0x204) / 2); // Cart Serial
|
|
|
|
switch (vbSerial) {
|
|
case 0x4D54: // MT = Mario's Tennis
|
|
case 0x4832: // H2 = Panic Bomber/Tobidase! Panibomb
|
|
case 0x5350: // SP = Space Invaders
|
|
case 0x5353: // SS = Space Squash
|
|
case 0x5452: // TR = V-Tetris
|
|
cartSize = 0x80000; // 512KB
|
|
break;
|
|
|
|
case 0x494D: // IM = Insmouse no Yakata
|
|
case 0x4A42: // JB = Jack Bros.
|
|
case 0x4D43: // MC = Mario Clash
|
|
case 0x5245: // RE = Red Alarm
|
|
case 0x4833: // H3 = Vertical Force
|
|
case 0x5642: // VB = Virtual Bowling
|
|
case 0x4A56: // JV = Virtual Lab
|
|
case 0x5650: // VP = Virtual League Baseball/Virtual Pro Yakyuu '95
|
|
cartSize = 0x100000; // 1MB
|
|
break;
|
|
|
|
case 0x5042: // PB = 3-D Tetris
|
|
case 0x4750: // GP = Galactic Pinball
|
|
case 0x5344: // SD = SD Gundam Dimension War
|
|
case 0x5442: // TB = Teleroboxer
|
|
case 0x5646: // VF = Virtual Fishing
|
|
cartSize = 0x100000; // 1MB
|
|
sramSize = 0x2000; // 8KB
|
|
break;
|
|
|
|
case 0x5647: // VG = Golf/T&E Virtual Golf
|
|
case 0x4E46: // NF = Nester's Funky Bowling
|
|
case 0x5745: // WE = Waterworld
|
|
cartSize = 0x200000; // 2MB
|
|
break;
|
|
|
|
case 0x5743: // WC = Virtual Boy Wario Land
|
|
cartSize = 0x200000; // 2MB
|
|
sramSize = 0x2000; // 8KB
|
|
break;
|
|
|
|
case 0x4644: // FD = Hyper Fighting
|
|
cartSize = 0x400000; // 4MB
|
|
sramSize = 0x2000; // 8KB
|
|
break;
|
|
}
|
|
|
|
if (cartSize)
|
|
break;
|
|
}
|
|
|
|
// Get name
|
|
for (byte c = 0; c < 20; c += 2) {
|
|
// split word
|
|
word myWord = readWord_VB((cartSize - 0x220 + c) / 2);
|
|
byte loByte = myWord & 0xFF;
|
|
byte hiByte = myWord >> 8;
|
|
|
|
// write to buffer
|
|
sdBuffer[c] = hiByte;
|
|
sdBuffer[c + 1] = loByte;
|
|
}
|
|
byte myLength = 0;
|
|
for (unsigned int i = 0; i < 20; i++) {
|
|
if (((char(sdBuffer[i]) >= 48 && char(sdBuffer[i]) <= 57) || (char(sdBuffer[i]) >= 65 && char(sdBuffer[i]) <= 122)) && myLength < 15) {
|
|
romName[myLength] = char(sdBuffer[i]);
|
|
myLength++;
|
|
}
|
|
}
|
|
|
|
display_Clear();
|
|
println_Msg(F("Cart Info"));
|
|
println_Msg(F(" "));
|
|
print_Msg(F("Name: "));
|
|
println_Msg(romName);
|
|
print_Msg(F("Size: "));
|
|
print_Msg(cartSize * 8 / 1024 / 1024);
|
|
println_Msg(F(" MBit"));
|
|
print_Msg(F("Sram: "));
|
|
if (sramSize > 0) {
|
|
print_Msg(sramSize * 8 / 1024);
|
|
println_Msg(F(" KBit"));
|
|
} else
|
|
println_Msg(F("None"));
|
|
println_Msg(F(" "));
|
|
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
// Wait for user input
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// READ CODE
|
|
//******************************************
|
|
|
|
void readROM_VB() {
|
|
dataIn_VB();
|
|
|
|
strcpy(fileName, romName);
|
|
strcat(fileName, ".vb");
|
|
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(folder, "VBOY/ROM/%s/%d", romName, foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
display_Clear();
|
|
print_STR(saving_to_STR, 0);
|
|
print_Msg(folder);
|
|
println_Msg(F("/..."));
|
|
display_Update();
|
|
|
|
foldern = foldern + 1;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
|
print_FatalError(sd_error_STR);
|
|
}
|
|
|
|
word d = 0;
|
|
uint32_t progress = 0;
|
|
draw_progressbar(0, cartSize);
|
|
// HYPER FIGHTING FIX
|
|
// VIRTUAL BOY ADDRESSING IS TOP DOWN
|
|
// ONLY FOR HYPER FIGHTING PLUGIN WITH ALL ADDRESS LINES CONNECTED
|
|
// NORMAL PLUGIN DOES NOT HAVE THE UPPER ADDRESS LINES CONNECTED
|
|
if (cartSize == 0x400000) {
|
|
unsigned long romData = 0x1000000 - (cartSize / 2);
|
|
for (unsigned long currBuffer = romData; currBuffer < 0x1000000; currBuffer += 256) {
|
|
for (int currWord = 0; currWord < 256; currWord++) {
|
|
word myWord = readWord_VB(currBuffer + currWord);
|
|
// Split word into two bytes
|
|
sdBuffer[d] = ((myWord >> 8) & 0xFF);
|
|
sdBuffer[d + 1] = (myWord & 0xFF);
|
|
d += 2;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
d = 0;
|
|
progress += 512;
|
|
draw_progressbar(progress, cartSize);
|
|
}
|
|
} else {
|
|
for (unsigned long currBuffer = 0; currBuffer < cartSize / 2; currBuffer += 256) {
|
|
for (int currWord = 0; currWord < 256; currWord++) {
|
|
word myWord = readWord_VB(currBuffer + currWord);
|
|
// Split word into two bytes
|
|
sdBuffer[d] = ((myWord >> 8) & 0xFF);
|
|
sdBuffer[d + 1] = (myWord & 0xFF);
|
|
d += 2;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
d = 0;
|
|
progress += 512;
|
|
draw_progressbar(progress, cartSize);
|
|
}
|
|
}
|
|
myFile.close();
|
|
|
|
// Compare CRC32 to database and rename ROM if found
|
|
// Arguments: database name, precalculated crc string or 0 to calculate, rename rom or not, starting offset
|
|
compareCRC("vb.txt", 0, 1, 0);
|
|
|
|
#if (defined(enable_OLED) || defined(enable_LCD))
|
|
// Wait for user input
|
|
println_Msg(F(""));
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// SRAM
|
|
//******************************************
|
|
|
|
void writeSRAM_VB() {
|
|
dataOut_VB();
|
|
|
|
sprintf(filePath, "%s/%s", filePath, fileName);
|
|
println_Msg(F("Writing..."));
|
|
println_Msg(filePath);
|
|
display_Update();
|
|
|
|
if (myFile.open(filePath, O_READ)) {
|
|
for (unsigned long currByte = 0; currByte < sramSize; currByte++) {
|
|
// writeWord_VB(currByte, ((myFile.read() << 8 ) & 0xFF));
|
|
writeByte_VB(currByte, (myFile.read()));
|
|
}
|
|
myFile.close();
|
|
print_STR(done_STR, 1);
|
|
display_Update();
|
|
} else {
|
|
print_FatalError(sd_error_STR);
|
|
}
|
|
dataIn_VB();
|
|
}
|
|
|
|
void readSRAM_VB() {
|
|
dataIn_VB();
|
|
|
|
strcpy(fileName, romName);
|
|
strcat(fileName, ".srm");
|
|
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(folder, "VBOY/SAVE/%s/%d", romName, foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
foldern = foldern + 1;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
|
print_FatalError(sd_error_STR);
|
|
}
|
|
for (unsigned long currBuffer = 0; currBuffer < sramSize; currBuffer += 512) {
|
|
for (int currByte = 0; currByte < 512; currByte++) {
|
|
byte myByte = readByte_VB(currBuffer + currByte);
|
|
sdBuffer[currByte] = myByte;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
myFile.close();
|
|
print_Msg(F("Saved to "));
|
|
print_Msg(folder);
|
|
println_Msg(F("/"));
|
|
display_Update();
|
|
}
|
|
|
|
unsigned long verifySRAM_VB() {
|
|
dataIn_VB();
|
|
writeErrors = 0;
|
|
|
|
if (myFile.open(filePath, O_READ)) {
|
|
for (unsigned long currBuffer = 0; currBuffer < sramSize; currBuffer += 512) {
|
|
for (int currByte = 0; currByte < 512; currByte++) {
|
|
byte myByte = readByte_VB(currBuffer + currByte);
|
|
sdBuffer[currByte] = myByte;
|
|
}
|
|
for (int i = 0; i < 512; i++) {
|
|
if (myFile.read() != sdBuffer[i]) {
|
|
writeErrors++;
|
|
}
|
|
}
|
|
}
|
|
myFile.close();
|
|
} else {
|
|
print_FatalError(sd_error_STR);
|
|
}
|
|
|
|
return writeErrors;
|
|
}
|
|
#endif
|
|
//******************************************
|
|
// End of File
|
|
//******************************************
|