mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-27 05:21:53 +01:00
322 lines
7.6 KiB
C++
322 lines
7.6 KiB
C++
//******************************************
|
|
// BALLY ASTROCADE MODULE
|
|
//******************************************
|
|
#ifdef ENABLE_BALLY
|
|
// Bally Astrocade
|
|
// Cartridge Pinout
|
|
// 26P 2.54mm pitch connector
|
|
//
|
|
// BOTTOM
|
|
// +-------+
|
|
// GND -| 1 |
|
|
// A7 -| 2 |
|
|
// A6 -| 3 |
|
|
// A5 -| 4 |
|
|
// A4 -| 5 |
|
|
// A3 -| 6 |
|
|
// A2 -| 7 |
|
|
// A1 -| 8 |
|
|
// A0 -| 9 |
|
|
// D0 -| 10 |
|
|
// D1 -| 11 |
|
|
// D2 -| 12 |
|
|
// GND -| 13 |
|
|
// D3 -| 14 |
|
|
// D4 -| 15 |
|
|
// D5 -| 16 |
|
|
// D6 -| 17 |
|
|
// D7 -| 18 |
|
|
// A11 -| 19 |
|
|
// A10 -| 20 |
|
|
// /ENABLE -| 21 |
|
|
// A12 -| 22 |
|
|
// A9 -| 23 |
|
|
// A8 -| 24 |
|
|
// VCC(+5V) -| 25 |
|
|
// GND -| 26 |
|
|
// +-------+
|
|
//
|
|
// TOP SIDE
|
|
// +-----------------------------------------------------------------------------------------------------------+
|
|
// LEFT | | RIGHT
|
|
// | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 |
|
|
// +-----------------------------------------------------------------------------------------------------------+
|
|
// GND A7 A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 GND D3 D4 D5 D6 D7 A11 A10 /EN A12 A9 A8 +5V GND
|
|
//
|
|
// BOTTOM SIDE
|
|
|
|
// CONTROL PINS:
|
|
// /ENABLE(PH3) - SNES /CS
|
|
|
|
//******************************************
|
|
// VARIABLES
|
|
//******************************************
|
|
|
|
byte BALLY[] = {2,4,8};
|
|
byte ballylo = 0; // Lowest Entry
|
|
byte ballyhi = 2; // Highest Entry
|
|
|
|
byte ballysize;
|
|
byte newballysize;
|
|
|
|
// EEPROM MAPPING
|
|
// 08 ROM SIZE
|
|
|
|
//******************************************
|
|
// MENU
|
|
//******************************************
|
|
// Base Menu
|
|
static const char* const menuOptionsBALLY[] PROGMEM = { FSTRING_SELECT_CART, FSTRING_READ_ROM, FSTRING_SET_SIZE, FSTRING_RESET };
|
|
|
|
void ballyMenu()
|
|
{
|
|
convertPgm(menuOptionsBALLY, 4);
|
|
uint8_t mainMenu = question_box(F("BALLY ASTROCADE MENU"), menuOptions, 4, 0);
|
|
|
|
switch (mainMenu)
|
|
{
|
|
case 0:
|
|
// Select Cart
|
|
setCart_BALLY();
|
|
setup_BALLY();
|
|
break;
|
|
|
|
case 1:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_BALLY();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 2:
|
|
// Set Size
|
|
setROMSize_BALLY();
|
|
break;
|
|
|
|
case 3:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// SETUP
|
|
//******************************************
|
|
|
|
void setup_BALLY()
|
|
{
|
|
// Request 5V
|
|
setVoltage(VOLTS_SET_5V);
|
|
|
|
// Set Address Pins to Output
|
|
// Bally Astrocade uses A0-A12 [A13-A23 UNUSED]
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// ---(PH0) ---(PH1) /ENABLE(PH3) ---(PH4) ---(PH5) ---(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
|
|
// Setting Control Pins to HIGH
|
|
// ---(PH0) ---(PH1) /ENABLE(PH3) ---(PH4) ---(PH5) ---(PH6)
|
|
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set Unused Data Pins (PA0-PA7) to Output
|
|
DDRA = 0xFF;
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTA = 0xFF;
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
checkStatus_BALLY();
|
|
strcpy(romName, "BALLY");
|
|
|
|
mode = CORE_BALLY;
|
|
}
|
|
|
|
//******************************************
|
|
// READ FUNCTIONS
|
|
//******************************************
|
|
|
|
uint8_t readData_BALLY(uint16_t addr)
|
|
{
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0xFF; // A8-A15
|
|
|
|
PORTC = 0xFF; // Input Pullup
|
|
PORTH &= ~(1 << 3); // /ENABLE LOW
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
uint8_t ret = PINC;
|
|
PORTH |= (1 << 3); // /ENABLE HIGH
|
|
|
|
return ret;
|
|
}
|
|
|
|
void readSegment_BALLY(uint16_t startaddr, uint16_t endaddr)
|
|
{
|
|
for (uint16_t addr = startaddr; addr < endaddr; addr += 512) {
|
|
for (int w = 0; w < 512; w++) {
|
|
uint8_t temp = readData_BALLY(addr + w);
|
|
sdBuffer[w] = temp;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// READ ROM
|
|
//******************************************
|
|
|
|
void readROM_BALLY()
|
|
{
|
|
createFolderAndOpenFile("BALLY", "ROM", romName, "bin");
|
|
|
|
readSegment_BALLY(0x0000,0x0800); // 2K
|
|
if (ballysize > 0) {
|
|
readSegment_BALLY(0x0800,0x1000); // +2K = 4K
|
|
if (ballysize > 1) {
|
|
readSegment_BALLY(0x1000,0x2000); // +4K = 8K
|
|
}
|
|
}
|
|
myFile.close();
|
|
|
|
printCRC(fileName, NULL, 0);
|
|
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
//******************************************
|
|
// ROM SIZE
|
|
//******************************************
|
|
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
void printRomSize_BALLY(int index)
|
|
{
|
|
display_Clear();
|
|
print_Msg(FS(FSTRING_ROM_SIZE));
|
|
println_Msg(BALLY[index]);
|
|
}
|
|
#endif
|
|
|
|
void setROMSize_BALLY()
|
|
{
|
|
byte newballysize;
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
display_Clear();
|
|
if (ballylo == ballyhi)
|
|
newballysize = ballylo;
|
|
else {
|
|
newballysize = navigateMenu(ballylo, ballyhi, &printRomSize_BALLY);
|
|
|
|
display.setCursor(0, 56); // Display selection at bottom
|
|
}
|
|
print_Msg(FS(FSTRING_ROM_SIZE));
|
|
print_Msg(BALLY[newballysize]);
|
|
println_Msg(F("KB"));
|
|
display_Update();
|
|
delay(1000);
|
|
#else
|
|
if (ballylo == ballyhi)
|
|
newballysize = ballylo;
|
|
else {
|
|
setrom:
|
|
String sizeROM;
|
|
for (int i = 0; i < (ballyhi - ballylo + 1); i++) {
|
|
Serial.print(F("Select ROM Size: "));
|
|
Serial.print(i);
|
|
Serial.print(F(" = "));
|
|
Serial.print(BALLY[i + ballylo]);
|
|
Serial.println(F("KB"));
|
|
}
|
|
Serial.print(F("Enter ROM Size: "));
|
|
while (Serial.available() == 0) {}
|
|
sizeROM = Serial.readStringUntil('\n');
|
|
Serial.println(sizeROM);
|
|
newballysize = sizeROM.toInt() + ballylo;
|
|
if (newballysize > ballyhi) {
|
|
Serial.println(F("SIZE NOT SUPPORTED"));
|
|
Serial.println(FS(FSTRING_EMPTY));
|
|
goto setrom;
|
|
}
|
|
}
|
|
Serial.print(F("ROM Size = "));
|
|
Serial.print(BALLY[newballysize]);
|
|
Serial.println(F("KB"));
|
|
#endif
|
|
EEPROM_writeAnything(8, newballysize);
|
|
ballysize = newballysize;
|
|
}
|
|
|
|
void checkStatus_BALLY()
|
|
{
|
|
EEPROM_readAnything(8, ballysize);
|
|
if (ballysize > ballyhi) {
|
|
ballysize = 0; // default 2K
|
|
EEPROM_writeAnything(8, ballysize);
|
|
}
|
|
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
display_Clear();
|
|
println_Msg(F("BALLY ASTROCADE"));
|
|
println_Msg(FS(FSTRING_CURRENT_SETTINGS));
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
print_Msg(FS(FSTRING_ROM_SIZE));
|
|
print_Msg(BALLY[ballysize]);
|
|
println_Msg(F("KB"));
|
|
display_Update();
|
|
wait();
|
|
#else
|
|
Serial.print(FS(FSTRING_ROM_SIZE));
|
|
Serial.print(BALLY[ballysize]);
|
|
Serial.println(F("KB"));
|
|
Serial.println(FS(FSTRING_EMPTY));
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// CART SELECT CODE
|
|
//******************************************
|
|
|
|
void setCart_BALLY()
|
|
{
|
|
//go to root
|
|
sd.chdir();
|
|
|
|
byte gameSize;
|
|
|
|
// Select starting letter
|
|
//byte myLetter = starting_letter();
|
|
|
|
// Open database
|
|
if (myFile.open("ballycart.txt", O_READ)) {
|
|
// seek_first_letter_in_database(myFile, myLetter);
|
|
|
|
if(checkCartSelection(myFile, &readDataLineSingleDigit, &gameSize)) {
|
|
EEPROM_writeAnything(8, gameSize);
|
|
}
|
|
} else {
|
|
print_FatalError(FS(FSTRING_DATABASE_FILE_NOT_FOUND));
|
|
}
|
|
}
|
|
#endif
|