mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-30 00:14:15 +01:00
308 lines
7.3 KiB
C++
308 lines
7.3 KiB
C++
//******************************************
|
|
// EMERSON ARCADIA 2001 MODULE
|
|
//******************************************
|
|
#if defined(ENABLE_ARC)
|
|
// Emerson Arcadia 2001
|
|
// Cartridge Pinout
|
|
// 30P 2.54mm pitch connector
|
|
//
|
|
// FRONT BACK
|
|
// SIDE SIDE
|
|
// +-------+
|
|
// GND -| 2 1 |- A13 (A12)
|
|
// VCC (+5V) -| 4 3 |- D3
|
|
// A0 -| 6 5 |- D4
|
|
// A1 -| 8 7 |- D5
|
|
// A2 -| 10 9 |- D6
|
|
// A3 -| 12 11 |- D7
|
|
// A4 -| 14 13 |- D0
|
|
// A5 -| 16 15 |- D2
|
|
// A6 -| 18 17 |- D1
|
|
// A7 -| 20 19 |- NC
|
|
// A8 -| 22 21 |- NC
|
|
// A9 -| 24 23 |- NC
|
|
// A10 -| 26 25 |- GND
|
|
// A11 -| 28 27 |- GND
|
|
// A12 (/EN) -| 30 29 |- NC
|
|
// +-------+
|
|
//
|
|
// BACK
|
|
// +------------------------------------------------------------+
|
|
// | 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 |
|
|
// LEFT | | RIGHT
|
|
// | 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 |
|
|
// +------------------------------------------------------------+
|
|
// FRONT
|
|
//
|
|
|
|
byte ARC[] = { 2, 4, 6, 8 };
|
|
byte arclo = 0; // Lowest Entry
|
|
byte archi = 3; // Highest Entry
|
|
|
|
byte arcsize;
|
|
|
|
// EEPROM MAPPING
|
|
// 08 ROM SIZE
|
|
|
|
//******************************************
|
|
// Menu
|
|
//******************************************
|
|
// Base Menu
|
|
static const char* const menuOptionsARC[] PROGMEM = { FSTRING_SELECT_CART, FSTRING_READ_ROM, FSTRING_SET_SIZE, FSTRING_RESET };
|
|
|
|
void setup_ARC() {
|
|
// Request 5V
|
|
setVoltage(VOLTS_SET_5V);
|
|
|
|
// Set Address Pins to Output
|
|
// Arcadia 2001 uses A0-A13 [A14-A23 UNUSED]
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// ---(PH0) ---(PH1) ---(PH3) ---(PH4) ---(PH5) ---(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
|
|
// Setting Unused Control Pins to HIGH
|
|
// ---(PH0) ---(PH1) ---(PH3) ---(PH4) ---(PH5) ---(PH6)
|
|
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set Unused Data Pins (PA0-PA7) to Output
|
|
DDRA = 0xFF;
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTA = 0xFF;
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
checkStatus_ARC();
|
|
strcpy(romName, "ARCADIA");
|
|
|
|
mode = CORE_ARC;
|
|
}
|
|
|
|
void arcMenu() {
|
|
convertPgm(menuOptionsARC, 4);
|
|
uint8_t mainMenu = question_box(F("ARCADIA 2001 MENU"), menuOptions, 4, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Select Cart
|
|
setCart_ARC();
|
|
setup_ARC();
|
|
break;
|
|
|
|
case 1:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_ARC();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 2:
|
|
// Set Size
|
|
setROMSize_ARC();
|
|
break;
|
|
|
|
case 3:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// READ CODE
|
|
//******************************************
|
|
|
|
uint8_t readData_ARC(uint16_t addr) {
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0xFF; // A8-A13
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
uint8_t ret = PINC;
|
|
|
|
return ret;
|
|
}
|
|
|
|
void readSegment_ARC(uint16_t startaddr, uint16_t endaddr) {
|
|
for (uint16_t addr = startaddr; addr < endaddr; addr += 512) {
|
|
for (int w = 0; w < 512; w++) {
|
|
uint8_t temp = readData_ARC(addr + w);
|
|
sdBuffer[w] = temp;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
|
|
void readROM_ARC() {
|
|
strcpy(fileName, romName);
|
|
strcat(fileName, ".bin");
|
|
|
|
// create a new folder for storing rom file
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(folder, "ARC/ROM/%d", foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
display_Clear();
|
|
print_Msg(F("Saving to "));
|
|
print_Msg(folder);
|
|
println_Msg(F("/..."));
|
|
display_Update();
|
|
|
|
// open file on sdcard
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
|
print_FatalError(create_file_STR);
|
|
}
|
|
// write new folder number back to EEPROM
|
|
foldern++;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
readSegment_ARC(0x0000, 0x0800); // 2K
|
|
if (arcsize > 0) {
|
|
readSegment_ARC(0x0800, 0x1000); // +2K = 4K
|
|
if (arcsize > 1) {
|
|
readSegment_ARC(0x2000, 0x2800); // +2K = 6K
|
|
if (arcsize > 2) {
|
|
readSegment_ARC(0x2800, 0x3000); // +2K = 8K
|
|
}
|
|
}
|
|
}
|
|
myFile.close();
|
|
|
|
printCRC(fileName, NULL, 0);
|
|
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
|
|
//******************************************
|
|
// ROM SIZE
|
|
//******************************************
|
|
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
void printRomSize_ARC(int index) {
|
|
display_Clear();
|
|
print_Msg(F("ROM Size: "));
|
|
println_Msg(ARC[index]);
|
|
}
|
|
#endif
|
|
|
|
void setROMSize_ARC() {
|
|
byte newarcsize;
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
display_Clear();
|
|
if (arclo == archi)
|
|
newarcsize = arclo;
|
|
else {
|
|
newarcsize = navigateMenu(arclo, archi, &printRomSize_ARC);
|
|
|
|
display.setCursor(0, 56); // Display selection at bottom
|
|
}
|
|
print_Msg(F("ROM SIZE "));
|
|
print_Msg(ARC[newarcsize]);
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
delay(1000);
|
|
#else
|
|
if (arclo == archi)
|
|
newarcsize = arclo;
|
|
else {
|
|
setrom:
|
|
String sizeROM;
|
|
for (int i = 0; i < (archi - arclo + 1); i++) {
|
|
Serial.print(F("Select ROM Size: "));
|
|
Serial.print(i);
|
|
Serial.print(F(" = "));
|
|
Serial.print(ARC[i + arclo]);
|
|
Serial.println(F("K"));
|
|
}
|
|
Serial.print(F("Enter ROM Size: "));
|
|
while (Serial.available() == 0) {}
|
|
sizeROM = Serial.readStringUntil('\n');
|
|
Serial.println(sizeROM);
|
|
newarcsize = sizeROM.toInt() + arclo;
|
|
if (newarcsize > archi) {
|
|
Serial.println(F("SIZE NOT SUPPORTED"));
|
|
Serial.println(FS(FSTRING_EMPTY));
|
|
goto setrom;
|
|
}
|
|
}
|
|
Serial.print(F("ROM Size = "));
|
|
Serial.print(ARC[newarcsize]);
|
|
Serial.println(F("K"));
|
|
#endif
|
|
EEPROM_writeAnything(8, newarcsize);
|
|
arcsize = newarcsize;
|
|
}
|
|
|
|
void checkStatus_ARC() {
|
|
EEPROM_readAnything(8, arcsize);
|
|
if (arcsize > 3) {
|
|
arcsize = 0;
|
|
EEPROM_writeAnything(8, arcsize);
|
|
}
|
|
|
|
#if (defined(ENABLE_OLED) || defined(ENABLE_LCD))
|
|
display_Clear();
|
|
println_Msg(F("ARCADIA 2001 READER"));
|
|
println_Msg(FS(FSTRING_CURRENT_SETTINGS));
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
print_Msg(F("ROM SIZE: "));
|
|
print_Msg(ARC[arcsize]);
|
|
println_Msg(F("K"));
|
|
display_Update();
|
|
wait();
|
|
#else
|
|
Serial.print(F("CURRENT ROM SIZE: "));
|
|
Serial.print(ARC[arcsize]);
|
|
Serial.println(F("K"));
|
|
Serial.println(FS(FSTRING_EMPTY));
|
|
#endif
|
|
}
|
|
|
|
//******************************************
|
|
// CART SELECT CODE
|
|
//******************************************
|
|
void setCart_ARC() {
|
|
//go to root
|
|
sd.chdir();
|
|
|
|
byte gameSize;
|
|
|
|
// Select starting letter
|
|
//byte myLetter = starting_letter();
|
|
|
|
// Open database
|
|
if (myFile.open("arccart.txt", O_READ)) {
|
|
// seek_first_letter_in_database(myFile, myLetter);
|
|
|
|
if(checkCartSelection(myFile, &readDataLineSingleDigit, &gameSize)) {
|
|
EEPROM_writeAnything(8, gameSize);
|
|
}
|
|
} else {
|
|
print_FatalError(FS(FSTRING_DATABASE_FILE_NOT_FOUND));
|
|
}
|
|
}
|
|
#endif
|
|
//******************************************
|
|
// End of File
|
|
//******************************************
|