mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-27 05:21:53 +01:00
2cf7f5dbe7
The `setVoltage()` function should be called even when `ENABLE_VSELECT` is disabled because `ENABLE_3V3FIX` also uses it. There is no resource cost to do this as when both options are disabled the compiler will optimize this function out. This just "future proofs" the code so if that function ever does more it doesn't need updated everywhere. This applies to `setup_FlashVoltage()` as well. The changes to OSCR.cpp are just for code formatting and additional comments to clarify this.
283 lines
7.0 KiB
C++
283 lines
7.0 KiB
C++
//******************************************
|
|
// POKEMON MINI MODULE
|
|
//******************************************
|
|
#ifdef enable_POKE
|
|
// Pokemon Mini
|
|
// Cartridge Pinout
|
|
// 32P 0.5mm pitch
|
|
// NOTE: Console SMD connector - 33P 1.0mm pitch
|
|
//
|
|
// TOP ROW BOTTOM ROW
|
|
// +----------+
|
|
// VCC (3.3V) -| B1 |
|
|
// | A1 |- VCC (3.3V)
|
|
// A20 -| B2 |
|
|
// | A2 |- A9/A19
|
|
// A8/A18 -| B3 |
|
|
// | A3 |- A7/A17
|
|
// A6/A16 -| B4 |
|
|
// | A4 |- A5/A15
|
|
// A4/A14 -| B5 |
|
|
// | A5 |- A3/A13
|
|
// A2/A12 -| B6 |
|
|
// | A6 |- A1/A11
|
|
// A0/A10 -| B7 |
|
|
// | A7 |- VCC (3.3V)
|
|
// HALE -| B8 |
|
|
// | -- |
|
|
// LALE -| B9 |
|
|
// | A8 |- GND
|
|
// D0 -| B10 |
|
|
// | A9 |- D1
|
|
// D2 -| B11 |
|
|
// | A10 |- D3
|
|
// D4 -| B12 |
|
|
// | A11 |- D5
|
|
// D6 -| B13 |
|
|
// | A12 |- D7
|
|
// OE -| B14 |
|
|
// | A13 |- IRQ
|
|
// WE -| B15 |
|
|
// | A14 |- CS
|
|
// CARD_N -| B16 |
|
|
// | A15 |- GND
|
|
// GND -| B17 |
|
|
// +----------+
|
|
//
|
|
// TOP
|
|
// +----------------------------------------------------------------------------+
|
|
// | B17 B16 B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 |
|
|
// LEFT | | RIGHT
|
|
// | A15 A14 A13 A12 A11 A10 A9 A8 --- A7 A6 A5 A4 A3 A2 A1 |
|
|
// +----------------------------------------------------------------------------+
|
|
// BOTTOM
|
|
|
|
// CONTROL PINS:
|
|
// HALE(PH0) - SNES RESET
|
|
// CS(PH3) - SNES /CS
|
|
// LALE(PH4) - SNES /IRQ
|
|
// WE(PH5) - SNES /WR
|
|
// OE(PH6) - SNES /RD
|
|
|
|
// NOTE: SET VOLTAGE TO 3.3V
|
|
|
|
//******************************************
|
|
// Defines
|
|
//******************************************
|
|
#define HALE_ENABLE PORTH |= (1 << 0) // LATCH HIGH ADDRESS
|
|
#define HALE_DISABLE PORTH &= ~(1 << 0)
|
|
#define LALE_ENABLE PORTH |= (1 << 4) // LATCH LOW ADDRESS
|
|
#define LALE_DISABLE PORTH &= ~(1 << 4)
|
|
#define CS_ENABLE PORTH |= (1 << 3) // CHIP SELECT
|
|
#define CS_DISABLE PORTH &= ~(1 << 3)
|
|
#define WE_ENABLE PORTH |= (1 << 5) // WRITE ENABLE
|
|
#define WE_DISABLE PORTH &= ~(1 << 5)
|
|
#define OE_ENABLE PORTH |= (1 << 6) // OUTPUT ENABLE
|
|
#define OE_DISABLE PORTH &= ~(1 << 6)
|
|
|
|
//******************************************
|
|
// Menu
|
|
//******************************************
|
|
// Base Menu
|
|
static const char pokeMenuItem1[] PROGMEM = "Read ROM";
|
|
static const char* const menuOptionsPOKE[] PROGMEM = { pokeMenuItem1, string_reset2 };
|
|
|
|
void pokeMenu() {
|
|
convertPgm(menuOptionsPOKE, 2);
|
|
uint8_t mainMenu = question_box(F("POKEMON MINI MENU"), menuOptions, 2, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_POKE();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 1:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// SETUP
|
|
//******************************************
|
|
void setup_POKE() {
|
|
// Request 3.3V
|
|
setVoltage(VOLTS_SET_3V3);
|
|
|
|
// Set Address Pins to Output
|
|
// Pokemon Mini uses A0-A9 (DUAL A10-A19) + A20 (CONNECT TO SNES A10) [A11-A23 UNUSED]
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// LALE(PH0) ---(PH1) CS(PH3) HALE(PH4) WE(PH5) OE(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
|
|
// Setting Control Pins to LOW (DISABLE)
|
|
// LALE(PH0) CS(PH3) HALE(PH4) WE(PH5) OE(PH6)
|
|
PORTH &= ~(1 << 0) & ~(1 << 3) & ~(1 << 4) & ~(1 << 5) & ~(1 << 6);
|
|
|
|
// SET CS HIGH
|
|
PORTH |= (1 << 3); // CS HIGH (ENABLE)
|
|
|
|
// Set Unused Data Pins (PA0-PA7) to Output
|
|
DDRA = 0xFF;
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTA = 0xFF;
|
|
PORTH |= (1 << 1); // CPUCLK(PH1)
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
strcpy(romName, "POKEMINI");
|
|
|
|
mode = mode_POKE;
|
|
}
|
|
|
|
//******************************************
|
|
// READ DATA
|
|
//******************************************
|
|
uint8_t readData_POKE(uint32_t addr) {
|
|
// Address Lines A0-A20 = 1MB (ALL ROMS ARE 512K)
|
|
// 100000 = 1 0000 0000 0000 0000 0000 = 100 0000 0000|00 0000 0000
|
|
|
|
// High Address A10-A20
|
|
PORTF = (addr >> 10) & 0xFF; // A10-A17
|
|
PORTK = (addr >> 18) & 0x07; // A18-A20
|
|
HALE_ENABLE; // LATCH HIGH ADDRESS
|
|
NOP;
|
|
NOP;
|
|
HALE_DISABLE;
|
|
|
|
// Low Address A0-A9
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0x03; // A8-A9
|
|
LALE_ENABLE; // LATCH LOW ADDRESS
|
|
NOP;
|
|
NOP;
|
|
|
|
// Read Enable
|
|
OE_ENABLE; // OE HIGH
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
// Data
|
|
uint8_t ret = PINC;
|
|
|
|
// Read Disable
|
|
OE_DISABLE; // OE LOW
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
LALE_DISABLE;
|
|
|
|
return ret;
|
|
}
|
|
|
|
//******************************************
|
|
// WRITE DATA
|
|
//******************************************
|
|
void writeData_POKE(uint32_t addr, uint8_t data) {
|
|
// High Address A10-A20
|
|
PORTF = (addr >> 10) & 0xFF; // A10-A17
|
|
PORTK = (addr >> 18) & 0x07; // A18-A20
|
|
HALE_ENABLE; // LATCH HIGH ADDRESS
|
|
NOP;
|
|
NOP;
|
|
HALE_DISABLE;
|
|
|
|
// Low Address A0-A9
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0x03; // A8-A9
|
|
LALE_ENABLE; // LATCH LOW ADDRESS
|
|
|
|
// Set Data to Output
|
|
DDRC = 0xFF;
|
|
PORTC = data;
|
|
|
|
// Write Enable
|
|
WE_ENABLE; // WE HIGH
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
// Write Disable
|
|
WE_DISABLE; // OE LOW
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
LALE_DISABLE;
|
|
|
|
// Reset Data to Input
|
|
DDRC = 0x00;
|
|
}
|
|
|
|
//******************************************
|
|
// READ ROM
|
|
//******************************************
|
|
|
|
void readROM_POKE() {
|
|
strcpy(fileName, romName);
|
|
strcat(fileName, ".min");
|
|
|
|
// create a new folder for storing rom file
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(folder, "POKE/ROM/%d", foldern);
|
|
sd.mkdir(folder, true);
|
|
sd.chdir(folder);
|
|
|
|
display_Clear();
|
|
print_STR(saving_to_STR, 0);
|
|
print_Msg(folder);
|
|
println_Msg(F("/..."));
|
|
display_Update();
|
|
|
|
// open file on sdcard
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT))
|
|
print_FatalError(sd_error_STR);
|
|
|
|
// write new folder number back to EEPROM
|
|
foldern++;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
for (uint32_t addr = 0; addr < 0x80000; addr += 512) { // 512K
|
|
for (int w = 0; w < 512; w++) {
|
|
uint8_t temp = readData_POKE(addr + w);
|
|
sdBuffer[w] = temp;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
myFile.close();
|
|
|
|
calcCRC(fileName, 0x80000, NULL, 0); // 512K
|
|
|
|
println_Msg(F(""));
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
#endif |