mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-26 21:11:54 +01:00
a8c03520c8
Seems to work fine with the Arduino running on 5V. Still a few read errors on 3.3V. Probably timing related.
1430 lines
37 KiB
C++
1430 lines
37 KiB
C++
//******************************************
|
|
// NINTENDO POWER
|
|
//******************************************
|
|
|
|
/******************************************
|
|
NP Clock Source
|
|
******************************************/
|
|
// The clock signal for the Nintendo Power cart
|
|
// is generated with the Adafruit Clock Generator
|
|
// If you don't have one just plug a wire into CLK0
|
|
// (Snes Pin 1) and let the 50/60Hz noise of your
|
|
// mains do the rest, works in ~80% of all cases ;)
|
|
|
|
/******************************************
|
|
Variables
|
|
*****************************************/
|
|
// Nintendo Power status
|
|
byte NPReady = 0;
|
|
|
|
// NP Menu
|
|
boolean hasMenu = true;
|
|
byte numGames = 0;
|
|
|
|
// Arrays that hold game info
|
|
int gameSize[8];
|
|
int saveSize[8];
|
|
byte gameAddress[8];
|
|
byte gameVersion[8];
|
|
char gameCode[8][10];
|
|
boolean hirom[8];
|
|
|
|
/******************************************
|
|
Menu
|
|
*****************************************/
|
|
// NP menu items
|
|
const char NPMenuItem1[] PROGMEM = "Game Menu";
|
|
const char NPMenuItem2[] PROGMEM = "Flash Menu";
|
|
const char NPMenuItem3[] PROGMEM = "Reset";
|
|
const char* const menuOptionsNP[] PROGMEM = {NPMenuItem1, NPMenuItem2, NPMenuItem3};
|
|
|
|
// NP flash menu items
|
|
const char NPFlashMenuItem1[] PROGMEM = "Read Flash";
|
|
const char NPFlashMenuItem2[] PROGMEM = "Write Flash";
|
|
const char NPFlashMenuItem3[] PROGMEM = "Print Mapping";
|
|
const char NPFlashMenuItem4[] PROGMEM = "Read Mapping";
|
|
const char NPFlashMenuItem5[] PROGMEM = "Write Mapping";
|
|
const char NPFlashMenuItem6[] PROGMEM = "Back";
|
|
const char* const menuOptionsNPFlash[] PROGMEM = {NPFlashMenuItem1, NPFlashMenuItem2, NPFlashMenuItem3, NPFlashMenuItem4, NPFlashMenuItem5, NPFlashMenuItem6};
|
|
|
|
// NP game menu items
|
|
const char NPGameMenuItem1[] PROGMEM = "Read Sram";
|
|
const char NPGameMenuItem2[] PROGMEM = "Read Game";
|
|
const char NPGameMenuItem3[] PROGMEM = "Write Sram";
|
|
const char NPGameMenuItem4[] PROGMEM = "Switch Game";
|
|
const char NPGameMenuItem5[] PROGMEM = "Reset";
|
|
const char* const menuOptionsNPGame[] PROGMEM = {NPGameMenuItem1, NPGameMenuItem2, NPGameMenuItem3, NPGameMenuItem4, NPGameMenuItem5};
|
|
|
|
void npMenu() {
|
|
// create menu with title and 3 options to choose from
|
|
unsigned char mainMenu;
|
|
// Copy menuOptions of of progmem
|
|
convertPgm(menuOptionsNP, 3);
|
|
mainMenu = question_box("Nintendo Power", menuOptions, 3, 0);
|
|
|
|
// wait for user choice to come back from the question box menu
|
|
switch (mainMenu)
|
|
{
|
|
// Game menu
|
|
case 0:
|
|
NPGameMenu();
|
|
break;
|
|
// Flash menu
|
|
case 1:
|
|
mode = mode_NPFlash;
|
|
break;
|
|
// Reset
|
|
case 2:
|
|
asm volatile (" jmp 0");
|
|
break;
|
|
}
|
|
}
|
|
|
|
void NPGameMenu() {
|
|
// Switch to hirom all
|
|
if (send_NP(0x04) == 0x2A) {
|
|
delay(300);
|
|
|
|
// Fill arrays with data
|
|
getGames();
|
|
|
|
if (hasMenu) {
|
|
// Create submenu options
|
|
char menuOptionsNPGames[8][20];
|
|
for (int i = 0; i < (numGames); i++) {
|
|
strncpy(menuOptionsNPGames[i], gameCode[i], 10);
|
|
}
|
|
|
|
// Create menu with title and numGames options to choose from
|
|
unsigned char gameSubMenu;
|
|
// wait for user choice to come back from the question box menu
|
|
gameSubMenu = question_box("Select Game", menuOptionsNPGames, numGames, 0);
|
|
|
|
// Switch to game
|
|
send_NP(gameSubMenu + 0x80);
|
|
delay(200);
|
|
// Check for successfull switch
|
|
byte timeout = 0;
|
|
while (readBank_SNES(0, 0x2400) != 0x7D) {
|
|
delay(200);
|
|
// Try again
|
|
send_NP(gameSubMenu + 0x80);
|
|
delay(200);
|
|
timeout++;
|
|
// Abort, something is wrong
|
|
if (timeout == 5) {
|
|
display_Clear();
|
|
print_Msg(F("Game "));
|
|
print_Msg(gameSubMenu + 0x80, HEX);
|
|
println_Msg(F(" Timeout"));
|
|
println_Msg(readBank_SNES(0, 0x2400), HEX);
|
|
println_Msg(F(""));
|
|
print_Error(F("Please powercycle NP cart"), true);
|
|
}
|
|
}
|
|
// Copy gameCode to romName in case of japanese chars in romName
|
|
strcpy(romName, gameCode[gameSubMenu + 1]);
|
|
|
|
// Print info
|
|
getCartInfo_SNES();
|
|
mode = mode_NPGame;
|
|
}
|
|
else {
|
|
// No menu so switch to only game
|
|
// Switch to game
|
|
send_NP(0x80);
|
|
delay(200);
|
|
|
|
// Copy gameCode to romName in case of japanese chars in romName
|
|
strcpy(romName, gameCode[0]);
|
|
|
|
// Print info
|
|
getCartInfo_SNES();
|
|
mode = mode_NPGame;
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("Switch to HiRom failed"), false);
|
|
}
|
|
}
|
|
|
|
void NPGameOptions() {
|
|
// create menu with title and 3 options to choose from
|
|
unsigned char gameSubMenu;
|
|
// Copy menuOptions of of progmem
|
|
convertPgm(menuOptionsNPGame, 5);
|
|
gameSubMenu = question_box("NP Game Menu", menuOptions, 5, 0);
|
|
|
|
// wait for user choice to come back from the question box menu
|
|
switch (gameSubMenu)
|
|
{
|
|
// Read sram
|
|
case 0:
|
|
display_Clear();
|
|
// Change working dir to root
|
|
sd.chdir("/");
|
|
readSRAM();
|
|
break;
|
|
|
|
// Read rom
|
|
case 1:
|
|
display_Clear();
|
|
// Change working dir to root
|
|
sd.chdir("/");
|
|
readROM_SNES();
|
|
compare_checksum();
|
|
break;
|
|
|
|
// Write sram
|
|
case 2:
|
|
display_Clear();
|
|
// Change working dir to root
|
|
sd.chdir("/");
|
|
writeSRAM(1);
|
|
unsigned long wrErrors;
|
|
wrErrors = verifySRAM();
|
|
if (wrErrors == 0) {
|
|
println_Msg(F("Verified OK"));
|
|
display_Update();
|
|
}
|
|
else {
|
|
print_Msg(F("Error: "));
|
|
print_Msg(wrErrors);
|
|
println_Msg(F(" bytes "));
|
|
print_Error(F("did not verify."), false);
|
|
}
|
|
break;
|
|
|
|
// Switch game
|
|
case 3:
|
|
NPGameMenu();
|
|
break;
|
|
|
|
// Reset
|
|
case 4:
|
|
asm volatile (" jmp 0");
|
|
break;
|
|
}
|
|
if (gameSubMenu != 3) {
|
|
println_Msg(F(""));
|
|
println_Msg(F("Press Button..."));
|
|
display_Update();
|
|
wait();
|
|
}
|
|
}
|
|
|
|
void NPFlashMenu() {
|
|
// create menu with title and 6 options to choose from
|
|
unsigned char flashSubMenu;
|
|
// Copy menuOptions of of progmem
|
|
convertPgm(menuOptionsNPFlash, 6);
|
|
flashSubMenu = question_box("NP Flash Menu", menuOptions, 6, 0);
|
|
|
|
// wait for user choice to come back from the question box menu
|
|
switch (flashSubMenu)
|
|
{
|
|
// Read Flash
|
|
case 0:
|
|
// Clear screen
|
|
display_Clear();
|
|
|
|
// Reset to root directory
|
|
sd.chdir("/");
|
|
|
|
// Reset to HIROM ALL
|
|
romType = 1;
|
|
print_Msg(F("Switch to HiRom..."));
|
|
display_Update();
|
|
if (send_NP(0x04) == 0x2A) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
|
|
// Reset flash
|
|
resetFlash_NP(0xC0);
|
|
resetFlash_NP(0xE0);
|
|
|
|
flashSize = 4194304;
|
|
numBanks = 64;
|
|
|
|
// Get name, add extension and convert to char array for sd lib
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(fileName, "NP%d", foldern);
|
|
strcat(fileName, ".bin");
|
|
sd.mkdir("NP", true);
|
|
sd.chdir("NP");
|
|
// write new folder number back to eeprom
|
|
foldern = foldern + 1;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
// Read flash
|
|
readFlash_NP();
|
|
}
|
|
else {
|
|
print_Error(F("Switch to HiRom failed"), false);
|
|
}
|
|
break;
|
|
|
|
// Write Flash
|
|
case 1:
|
|
filePath[0] = '\0';
|
|
sd.chdir("/");
|
|
// Launch file browser
|
|
fileBrowser("Select 4MB file");
|
|
display_Clear();
|
|
sprintf(filePath, "%s/%s", filePath, fileName);
|
|
flashSize = 2097152;
|
|
numBanks = 32;
|
|
println_Msg(F("Writing 1st rom"));
|
|
display_Update();
|
|
// Program 1st flashrom
|
|
write_NP(0xC0, 0);
|
|
display_Clear();
|
|
println_Msg(F("Writing 2nd rom"));
|
|
display_Update();
|
|
// Program 2nd flashrom
|
|
write_NP(0xE0, 2097152);
|
|
break;
|
|
|
|
// Print mapping
|
|
case 2:
|
|
// Clear screen
|
|
display_Clear();
|
|
|
|
// Reset to root directory
|
|
sd.chdir("/");
|
|
|
|
// Reset to HIROM ALL
|
|
romType = 1;
|
|
print_Msg(F("Switch to HiRom..."));
|
|
display_Update();
|
|
if (send_NP(0x04) == 0x2A) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
idFlash_NP(0xC0);
|
|
if (strcmp(flashid, "c2f3") == 0) {
|
|
idFlash_NP(0xE0);
|
|
if (strcmp(flashid, "c2f3") == 0) {
|
|
// Reset flash
|
|
resetFlash_NP(0xC0);
|
|
resetFlash_NP(0xE0);
|
|
delay(100);
|
|
// Clear screen
|
|
display_Clear();
|
|
printMapping();
|
|
resetFlash_NP(0xC0);
|
|
resetFlash_NP(0xE0);
|
|
}
|
|
else {
|
|
print_Error(F("Error: Wrong Flash ID"), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("Error: Wrong Flash ID"), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("failed"), false);
|
|
}
|
|
break;
|
|
|
|
// Read mapping
|
|
case 3:
|
|
// Clear screen
|
|
display_Clear();
|
|
|
|
// Reset to root directory
|
|
sd.chdir("/");
|
|
|
|
// Reset to HIROM ALL
|
|
romType = 1;
|
|
print_Msg(F("Switch to HiRom..."));
|
|
display_Update();
|
|
if (send_NP(0x04) == 0x2A) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
idFlash_NP(0xC0);
|
|
if (strcmp(flashid, "c2f3") == 0) {
|
|
idFlash_NP(0xE0);
|
|
if (strcmp(flashid, "c2f3") == 0) {
|
|
// Reset flash
|
|
resetFlash_NP(0xC0);
|
|
resetFlash_NP(0xE0);
|
|
delay(100);
|
|
readMapping();
|
|
resetFlash_NP(0xC0);
|
|
resetFlash_NP(0xE0);
|
|
}
|
|
else {
|
|
print_Error(F("Error: Wrong Flash ID"), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("Error: Wrong Flash ID"), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("failed"), false);
|
|
}
|
|
break;
|
|
|
|
// Write mapping
|
|
case 4:
|
|
// Clear screen
|
|
display_Clear();
|
|
|
|
// Reset to root directory
|
|
sd.chdir("/");
|
|
|
|
// Erase mapping
|
|
eraseMapping(0xD0);
|
|
eraseMapping(0xE0);
|
|
print_Msg(F("Blankcheck..."));
|
|
display_Update();
|
|
if (blankcheckMapping()) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
}
|
|
else {
|
|
println_Msg(F("Nope"));
|
|
break;
|
|
}
|
|
|
|
// Clear screen
|
|
display_Clear();
|
|
|
|
// Clear filepath
|
|
filePath[0] = '\0';
|
|
|
|
// Reset to root directory
|
|
sd.chdir("/");
|
|
|
|
// Launch file browser
|
|
fileBrowser("Select MAP file");
|
|
display_Clear();
|
|
sprintf(filePath, "%s/%s", filePath, fileName);
|
|
display_Update();
|
|
|
|
// Write mapping
|
|
writeMapping(0xD0, 0);
|
|
writeMapping(0xE0, 256);
|
|
break;
|
|
|
|
// Go back
|
|
case 5:
|
|
mode = mode_NP;
|
|
break;
|
|
}
|
|
if (flashSubMenu != 5) {
|
|
println_Msg(F(""));
|
|
println_Msg(F("Press Button..."));
|
|
display_Update();
|
|
wait();
|
|
}
|
|
}
|
|
|
|
// Read the games from the menu area
|
|
void getGames() {
|
|
// Set data pins to input
|
|
dataIn();
|
|
// Set control pins to input
|
|
controlIn_SNES();
|
|
|
|
// Check if menu is present
|
|
byte menuString[] = {0x4D, 0x45, 0x4E, 0x55, 0x20, 0x50, 0x52, 0x4F, 0x47, 0x52, 0x41, 0x4D};
|
|
for (int i = 0; i < 12; i++) {
|
|
if (menuString[i] != readBank_SNES(0xC0, 0x7FC0 + i)) {
|
|
hasMenu = false;
|
|
}
|
|
}
|
|
|
|
if (hasMenu) {
|
|
// Count number of games
|
|
for (word i = 0x0000; i < 0xE000; i += 0x2000) {
|
|
if (readBank_SNES(0xC6, i) == numGames )
|
|
numGames++;
|
|
}
|
|
|
|
// Get game info
|
|
for (int i = 0; i < numGames; i++) {
|
|
// Read starting address and size
|
|
gameAddress[i] = 0xC0 + readBank_SNES(0xC6, i * 0x2000 + 0x01) * 0x8;
|
|
gameSize[i] = readBank_SNES(0xC6, i * 0x2000 + 0x03) * 128;
|
|
saveSize[i] = readBank_SNES(0xC6, i * 0x2000 + 0x05) / 8;
|
|
|
|
//check if hirom
|
|
if (readBank_SNES(gameAddress[i], 0xFFD5) == 0x31) {
|
|
hirom[i] = true;
|
|
}
|
|
else if (readBank_SNES(gameAddress[i], 0xFFD5) == 0x21) {
|
|
hirom[i] = true;
|
|
}
|
|
else {
|
|
hirom[i] = false;
|
|
}
|
|
|
|
if (hirom[i]) {
|
|
gameVersion[i] = readBank_SNES(gameAddress[i], 0xFFDB);
|
|
} else {
|
|
gameVersion[i] = readBank_SNES(gameAddress[i], 0x7FDB);
|
|
}
|
|
|
|
// Read game code
|
|
byte myByte = 0;
|
|
byte myLength = 0;
|
|
for (int j = 0; j < 9; j++) {
|
|
myByte = readBank_SNES(0xC6, i * 0x2000 + 0x07 + j);
|
|
// Remove funny characters
|
|
if (((char(myByte) >= 44 && char(myByte) <= 57) || (char(myByte) >= 65 && char(myByte) <= 122)) && myLength < 9) {
|
|
gameCode[i][myLength] = char(myByte);
|
|
myLength++;
|
|
}
|
|
}
|
|
// End char array in case game code is less than 9 chars
|
|
gameCode[i][myLength] = '\0';
|
|
}
|
|
}
|
|
else {
|
|
//check if hirom
|
|
if (readBank_SNES(0xC0, 0xFFD5) == 0x31) {
|
|
hirom[0] = true;
|
|
}
|
|
else {
|
|
hirom[0] = false;
|
|
}
|
|
|
|
if (hirom[0]) {
|
|
gameVersion[0] = readBank_SNES(0xC0, 0xFFDB);
|
|
gameCode[0][0] = 'G';
|
|
gameCode[0][1] = 'A';
|
|
gameCode[0][2] = 'M';
|
|
gameCode[0][3] = 'E';
|
|
gameCode[0][4] = '-';
|
|
gameCode[0][5] = char(readBank_SNES(0xC0, 0xFFB2));
|
|
gameCode[0][6] = char(readBank_SNES(0xC0, 0xFFB3));
|
|
gameCode[0][7] = char(readBank_SNES(0xC0, 0xFFB4));
|
|
gameCode[0][8] = char(readBank_SNES(0xC0, 0xFFB5));
|
|
gameCode[0][9] = '\0';
|
|
|
|
byte romSizeExp = readBank_SNES(0xC0, 0xFFD7) - 7;
|
|
gameSize[0] = 1;
|
|
while (romSizeExp--)
|
|
gameSize[0] *= 2;
|
|
}
|
|
else {
|
|
gameVersion[0] = readBank_SNES(0xC0, 0x7FDB);
|
|
gameCode[0][0] = 'G';
|
|
gameCode[0][1] = 'A';
|
|
gameCode[0][2] = 'M';
|
|
gameCode[0][3] = 'E';
|
|
gameCode[0][4] = '-';
|
|
gameCode[0][5] = char(readBank_SNES(0xC0, 0x7FB2));
|
|
gameCode[0][6] = char(readBank_SNES(0xC0, 0x7FB3));
|
|
gameCode[0][7] = char(readBank_SNES(0xC0, 0x7FB4));
|
|
gameCode[0][8] = char(readBank_SNES(0xC0, 0x7FB5));
|
|
gameCode[0][9] = '\0';
|
|
|
|
byte romSizeExp = readBank_SNES(0xC0, 0x7FD7) - 7;
|
|
gameSize[0] = 1;
|
|
while (romSizeExp--)
|
|
gameSize[0] *= 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
/******************************************
|
|
Setup
|
|
*****************************************/
|
|
void setup_NP() {
|
|
// Set cicrstPin(PG1) to Output
|
|
DDRG |= (1 << 1);
|
|
// Output a high signal to disable snesCIC if installed
|
|
PORTG |= (1 << 1);
|
|
// Set cichstPin(PG0) to Input
|
|
DDRG &= ~(1 << 0);
|
|
|
|
// Adafruit Clock Generator
|
|
//clockgen.set_correction(-29000);
|
|
clockgen.set_correction(0);
|
|
clockgen.init(SI5351_CRYSTAL_LOAD_8PF, 0);
|
|
clockgen.set_pll(SI5351_PLL_FIXED, SI5351_PLLA);
|
|
clockgen.set_pll(SI5351_PLL_FIXED, SI5351_PLLB);
|
|
// Half Clock
|
|
//clockgen.set_freq(1073863600ULL, SI5351_PLL_FIXED, SI5351_CLK0);
|
|
// Full Clock
|
|
clockgen.set_freq(2147727200ULL, SI5351_PLL_FIXED, SI5351_CLK0);
|
|
// CIC Clock
|
|
//clockgen.set_freq(307200000ULL, SI5351_PLL_FIXED, SI5351_CLK2);
|
|
clockgen.output_enable(SI5351_CLK0, 1);
|
|
clockgen.output_enable(SI5351_CLK1, 0);
|
|
clockgen.output_enable(SI5351_CLK2, 0);
|
|
|
|
// Set Address Pins to Output
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//BA0-BA7
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output RST(PH0) CS(PH3) WR(PH5) RD(PH6)
|
|
DDRH |= (1 << 0) | (1 << 3) | (1 << 5) | (1 << 6);
|
|
// Output a high signal on all pins, pins are active low therefore everything is disabled now
|
|
PORTH |= (1 << 0) | (1 << 3) | (1 << 5) | (1 << 6);
|
|
|
|
// Set IRQ(PH4) to Input
|
|
DDRH &= ~(1 << 4);
|
|
// Activate Internal Pullup Resistors
|
|
PORTH |= (1 << 4);
|
|
|
|
// Set Data Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
// Enable Internal Pullups
|
|
PORTC = 0xFF;
|
|
|
|
// Wait until all is stable
|
|
delay(200);
|
|
|
|
// Switch to HiRom All
|
|
byte timeout = 0;
|
|
send_NP(0x04);
|
|
delay(100);
|
|
while (readBank_SNES(0, 0x2400) != 0x2A) {
|
|
delay(100);
|
|
// Try again
|
|
send_NP(0x04);
|
|
delay(100);
|
|
timeout++;
|
|
// Abort, something is wrong
|
|
if (timeout == 5) {
|
|
println_Msg(F("Hirom All Timeout"));
|
|
println_Msg(F(""));
|
|
println_Msg(F(""));
|
|
print_Error(F("Please powercycle NP cart"), true);
|
|
}
|
|
}
|
|
}
|
|
|
|
/******************************************
|
|
29F1601 flashrom functions (NP)
|
|
*****************************************/
|
|
// Reset the MX29F1601 flashrom, startbank is 0xC0 for first and 0xE0 for second flashrom
|
|
void resetFlash_NP(int startBank) {
|
|
// Configure control pins
|
|
controlOut_SNES();
|
|
// Set data pins to output
|
|
dataOut();
|
|
|
|
// Reset command sequence
|
|
if (romType) {
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xf0);
|
|
}
|
|
else {
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0xaa);
|
|
writeBank_SNES(0, 0x8000 + 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0xf0);
|
|
}
|
|
}
|
|
|
|
// Print flashrom manufacturer and device ID
|
|
void idFlash_NP(int startBank) {
|
|
// Configure control pins
|
|
controlOut_SNES();
|
|
// Set data pins to output
|
|
dataOut();
|
|
|
|
if (romType) {
|
|
// ID command sequence
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0x90);
|
|
|
|
// Set data pins to input again
|
|
dataIn();
|
|
// Set control pins to input
|
|
controlIn_SNES();
|
|
|
|
// Read the two id bytes into a string
|
|
sprintf(flashid, "%x%x", readBank_SNES(startBank, 0x00), readBank_SNES(startBank, 0x02));
|
|
}
|
|
else {
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0xaa);
|
|
writeBank_SNES(0, 0x8000 + 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0x90);
|
|
|
|
// Set data pins to input again
|
|
dataIn();
|
|
// Set control pins to input
|
|
controlIn_SNES();
|
|
|
|
// Read the two id bytes into a string
|
|
sprintf(flashid, "%x%x", readBank_SNES(0, 0x8000), readBank_SNES(0, 0x8000 + 0x02));
|
|
}
|
|
}
|
|
|
|
// Write the flashroms by reading a file from the SD card, pos defines where in the file the reading/writing should start
|
|
void writeFlash_NP(int startBank, uint32_t pos) {
|
|
display_Clear();
|
|
print_Msg(F("Writing Bank 0x"));
|
|
print_Msg(startBank, HEX);
|
|
print_Msg(F("..."));
|
|
display_Update();
|
|
|
|
// Open file on sd card
|
|
if (myFile.open(filePath, O_READ)) {
|
|
|
|
// Seek to a new position in the file
|
|
if (pos != 0)
|
|
myFile.seekCur(pos);
|
|
|
|
// Configure control pins
|
|
controlOut_SNES();
|
|
// Set data pins to output
|
|
dataOut();
|
|
|
|
if (romType) {
|
|
// Write hirom
|
|
for (int currBank = startBank; currBank < startBank + numBanks; currBank++) {
|
|
// Fill SDBuffer with 1 page at a time then write it repeat until all bytes are written
|
|
for (unsigned long currByte = 0; currByte < 0x10000; currByte += 128) {
|
|
myFile.read(sdBuffer, 128);
|
|
// Write command sequence
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xa0);
|
|
|
|
for (byte c = 0; c < 128; c++) {
|
|
|
|
// Write one byte of data
|
|
writeBank_SNES(currBank, currByte + c, sdBuffer[c]);
|
|
|
|
if (c == 127) {
|
|
// Write the last byte twice or else it won't write at all
|
|
writeBank_SNES(currBank, currByte + c, sdBuffer[c]);
|
|
}
|
|
}
|
|
// Wait until write is finished
|
|
busyCheck_NP(startBank);
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
// Write lorom
|
|
for (int currBank = 0; currBank < numBanks; currBank++) {
|
|
for (unsigned long currByte = 0x8000; currByte < 0x10000; currByte += 128) {
|
|
myFile.read(sdBuffer, 128);
|
|
// Write command sequence
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0xaa);
|
|
writeBank_SNES(0, 0x8000 + 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0xa0);
|
|
|
|
for (byte c = 0; c < 128; c++) {
|
|
// Write one byte of data
|
|
writeBank_SNES(currBank, currByte + c, sdBuffer[c]);
|
|
|
|
if (c == 127) {
|
|
// Write the last byte twice or else it won't write at all
|
|
writeBank_SNES(currBank, currByte + c, sdBuffer[c]);
|
|
}
|
|
}
|
|
// Wait until write is finished
|
|
busyCheck_NP(startBank);
|
|
}
|
|
}
|
|
}
|
|
// Close the file:
|
|
myFile.close();
|
|
println_Msg("");
|
|
}
|
|
else {
|
|
print_Error(F("Can't open file on SD"), true);
|
|
}
|
|
}
|
|
|
|
// Delay between write operations based on status register
|
|
void busyCheck_NP(byte startBank) {
|
|
// Set data pins to input
|
|
dataIn();
|
|
// Set control pins to input and therefore pull CE low and latch status register content
|
|
controlIn_SNES();
|
|
|
|
// Read register
|
|
readBank_SNES(startBank, 0x0000);
|
|
|
|
// Read D7 while D7 = 0
|
|
//1 = B00000001, 1 << 7 = B10000000, PINC = B1XXXXXXX (X = don't care), & = bitwise and
|
|
while (!(PINC & (1 << 7))) {
|
|
// CE or OE must be toggled with each subsequent status read or the
|
|
// completion of a program or erase operation will not be evident.
|
|
// Switch RD(PH6) to HIGH
|
|
PORTH |= (1 << 6);
|
|
|
|
// one nop ~62.5ns
|
|
__asm__("nop\n\t");
|
|
|
|
// Switch RD(PH6) to LOW
|
|
PORTH &= ~(1 << 6);
|
|
|
|
// one nop ~62.5ns
|
|
__asm__("nop\n\t");
|
|
}
|
|
|
|
// Configure control pins
|
|
controlOut_SNES();
|
|
// Set data pins to output
|
|
dataOut();
|
|
}
|
|
|
|
// Erase the flashrom to 0xFF
|
|
void eraseFlash_NP(int startBank) {
|
|
|
|
// Configure control pins
|
|
controlOut_SNES();
|
|
// Set data pins to output
|
|
dataOut();
|
|
|
|
if (romType) {
|
|
// Erase command sequence
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0x80);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0x10);
|
|
}
|
|
else {
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0xaa);
|
|
writeBank_SNES(0, 0x8000 + 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0x80);
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0xaa);
|
|
writeBank_SNES(0, 0x8000 + 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(1, 0x8000 + 0x1555L * 2, 0x10);
|
|
}
|
|
|
|
// Wait for erase to complete
|
|
busyCheck_NP(startBank);
|
|
}
|
|
|
|
// Check if an erase succeeded, return 1 if blank and 0 if not
|
|
byte blankcheck_NP(int startBank) {
|
|
|
|
// Set data pins to input again
|
|
dataIn();
|
|
// Set control pins to input
|
|
controlIn_SNES();
|
|
|
|
byte blank = 1;
|
|
if (romType) {
|
|
for (int currBank = startBank; currBank < startBank + numBanks; currBank++) {
|
|
for (unsigned long currByte = 0; currByte < 0x10000; currByte++) {
|
|
if (readBank_SNES(currBank, currByte) != 0xFF) {
|
|
currBank = startBank + numBanks;
|
|
blank = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
for (int currBank = 0; currBank < numBanks; currBank++) {
|
|
for (unsigned long currByte = 0x8000; currByte < 0x10000; currByte++) {
|
|
if (readBank_SNES(currBank, currByte) != 0xFF) {
|
|
currBank = numBanks;
|
|
blank = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return blank;
|
|
}
|
|
|
|
// Check if a write succeeded, returns 0 if all is ok and number of errors if not
|
|
unsigned long verifyFlash_NP(int startBank, uint32_t pos) {
|
|
unsigned long verified = 0;
|
|
|
|
// Open file on sd card
|
|
if (myFile.open(filePath, O_READ)) {
|
|
|
|
// Set file starting position
|
|
myFile.seekCur(pos);
|
|
|
|
// Set data pins to input
|
|
dataIn();
|
|
// Set control pins to input
|
|
controlIn_SNES();
|
|
|
|
if (romType) {
|
|
for (int currBank = startBank; currBank < startBank + numBanks; currBank++) {
|
|
for (unsigned long currByte = 0; currByte < 0x10000; currByte += 512) {
|
|
// Fill SDBuffer
|
|
myFile.read(sdBuffer, 512);
|
|
for (int c = 0; c < 512; c++) {
|
|
if (readBank_SNES(currBank, currByte + c) != sdBuffer[c]) {
|
|
verified++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
for (int currBank = 0; currBank < numBanks; currBank++) {
|
|
for (unsigned long currByte = 0x8000; currByte < 0x10000; currByte += 512) {
|
|
// Fill SDBuffer
|
|
myFile.read(sdBuffer, 512);
|
|
for (int c = 0; c < 512; c++) {
|
|
if (readBank_SNES(currBank, currByte + c) != sdBuffer[c]) {
|
|
verified++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// Close the file:
|
|
myFile.close();
|
|
}
|
|
else {
|
|
// SD Error
|
|
verified = 999999;
|
|
print_Error(F("Can't open file on SD"), false);
|
|
}
|
|
// Return 0 if verified ok, or number of errors
|
|
return verified;
|
|
}
|
|
|
|
// Read flashroms and save them to the SD card
|
|
void readFlash_NP() {
|
|
// Set data pins to input
|
|
dataIn();
|
|
// Set control pins to input
|
|
controlIn_SNES();
|
|
|
|
print_Msg(F("Saving as "));
|
|
print_Msg(fileName);
|
|
println_Msg(F("..."));
|
|
display_Update();
|
|
|
|
// Open file on sd card
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
|
print_Error(F("Can't create file on SD"), true);
|
|
}
|
|
if (romType) {
|
|
for (int currBank = 0xC0; currBank < 0xC0 + numBanks; currBank++) {
|
|
for (unsigned long currByte = 0; currByte < 0x10000; currByte += 512) {
|
|
for (int c = 0; c < 512; c++) {
|
|
sdBuffer[c] = readBank_SNES(currBank, currByte + c);
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
for (int currBank = 0; currBank < numBanks; currBank++) {
|
|
for (unsigned long currByte = 0x8000; currByte < 0x10000; currByte += 512) {
|
|
for (int c = 0; c < 512; c++) {
|
|
sdBuffer[c] = readBank_SNES(currBank, currByte + c);
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
}
|
|
}
|
|
}
|
|
// Close the file:
|
|
myFile.close();
|
|
println_Msg("");
|
|
println_Msg(F("Finished reading"));
|
|
display_Update();
|
|
}
|
|
|
|
// Display protected sectors/banks as 0xc2 and unprotected as 0x00
|
|
void readSectorProtection_NP(byte startBank) {
|
|
|
|
// Configure control pins
|
|
controlOut_SNES();
|
|
// Set data pins to output
|
|
dataOut();
|
|
|
|
// Display Sector Protection Status
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0x90);
|
|
|
|
// Configure control pins
|
|
controlIn_SNES();
|
|
// Set data pins to output
|
|
dataIn();
|
|
display_Clear();
|
|
for (int i = 0; i <= 0x1F; i++) {
|
|
print_Msg(F("Sector: 0x"));
|
|
print_Msg(startBank + i, HEX);
|
|
print_Msg(F(" Sector Protect: 0x"));
|
|
println_Msg(readBank_SNES(startBank + i, 0x04), HEX);
|
|
}
|
|
display_Update();
|
|
}
|
|
|
|
// Read the current mapping from the hidden "page buffer" and print it
|
|
void printMapping() {
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset to defaults
|
|
writeBank_SNES(0xC0, 0x0000, 0x38);
|
|
writeBank_SNES(0xC0, 0x0000, 0xd0);
|
|
// Read Extended Status Register (GSR and PSR)
|
|
writeBank_SNES(0xC0, 0x0000, 0x71);
|
|
// Page Buffer Swap
|
|
writeBank_SNES(0xC0, 0x0000, 0x72);
|
|
// Read Page Buffer
|
|
writeBank_SNES(0xC0, 0x0000, 0x75);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Read the mapping out of the first chip
|
|
char buffer[3];
|
|
|
|
for (int currByte = 0xFF00; currByte < 0xFF50; currByte += 10) {
|
|
for (int c = 0; c < 10; c++) {
|
|
itoa (readBank_SNES(0xC0, currByte + c), buffer, 16);
|
|
for (int i = 0; i < 2 - strlen(buffer); i++) {
|
|
print_Msg("0");
|
|
}
|
|
// Now print the significant bits
|
|
print_Msg(buffer);
|
|
}
|
|
println_Msg("");
|
|
}
|
|
display_Update();
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset Flash
|
|
writeBank_SNES(0xC0, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(0xC0, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(0xC0, 0x5555L * 2, 0xf0);
|
|
|
|
// Reset Flash
|
|
writeBank_SNES(0xE0, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(0xE0, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(0xE0, 0x5555L * 2, 0xf0);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
}
|
|
|
|
// Read the current mapping from the hidden "page buffer"
|
|
void readMapping() {
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset to defaults
|
|
writeBank_SNES(0xC0, 0x0000, 0x38);
|
|
writeBank_SNES(0xC0, 0x0000, 0xd0);
|
|
// Read Extended Status Register (GSR and PSR)
|
|
writeBank_SNES(0xC0, 0x0000, 0x71);
|
|
// Page Buffer Swap
|
|
writeBank_SNES(0xC0, 0x0000, 0x72);
|
|
// Read Page Buffer
|
|
writeBank_SNES(0xC0, 0x0000, 0x75);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Get name, add extension and convert to char array for sd lib
|
|
EEPROM_readAnything(0, foldern);
|
|
sprintf(fileName, "NP%d", foldern);
|
|
strcat(fileName, ".MAP");
|
|
sd.mkdir("NP", true);
|
|
sd.chdir("NP");
|
|
|
|
// write new folder number back to eeprom
|
|
foldern = foldern + 1;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
//open file on sd card
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
|
print_Error(F("SD Error"), true);
|
|
}
|
|
|
|
// Read the mapping info out of the 1st chip
|
|
for (unsigned long currByte = 0xFF00; currByte <= 0xFFFF; currByte++) {
|
|
myFile.write(readBank_SNES(0xC0, currByte));
|
|
}
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset to defaults
|
|
writeBank_SNES(0xE0, 0x0000, 0x38);
|
|
writeBank_SNES(0xE0, 0x0000, 0xd0);
|
|
// Read Extended Status Register (GSR and PSR)
|
|
writeBank_SNES(0xE0, 0x0000, 0x71);
|
|
// Page Buffer Swap
|
|
writeBank_SNES(0xE0, 0x0000, 0x72);
|
|
// Read Page Buffer
|
|
writeBank_SNES(0xE0, 0x0000, 0x75);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Read the mapping info out of the 1st chip
|
|
for (unsigned long currByte = 0xFF00; currByte <= 0xFFFF; currByte++) {
|
|
myFile.write(readBank_SNES(0xE0, currByte));
|
|
}
|
|
|
|
// Close the file:
|
|
myFile.close();
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset Flash
|
|
writeBank_SNES(0xC0, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(0xC0, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(0xC0, 0x5555L * 2, 0xf0);
|
|
|
|
// Reset Flash
|
|
writeBank_SNES(0xE0, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(0xE0, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(0xE0, 0x5555L * 2, 0xf0);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Signal end of process
|
|
print_Msg(F("Saved to NP/"));
|
|
println_Msg(fileName);
|
|
display_Update();
|
|
}
|
|
|
|
void eraseMapping(byte startBank) {
|
|
|
|
if (unlockHirom()) {
|
|
// Get ID
|
|
idFlash_NP(startBank);
|
|
if (strcmp(flashid, "c2f3") == 0) {
|
|
resetFlash_NP(startBank);
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Prepare to erase/write Page Buffer
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0x77);
|
|
// Erase Page Buffer
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xe0);
|
|
|
|
// Wait until complete
|
|
busyCheck_NP(startBank);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
}
|
|
else {
|
|
print_Error(F("Error: Wrong Flash ID"), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("Unlock failed"), true);
|
|
}
|
|
}
|
|
|
|
// Check if the current mapping is all 0xFF
|
|
byte blankcheckMapping() {
|
|
byte blank = 1;
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset to defaults
|
|
writeBank_SNES(0xC0, 0x0000, 0x38);
|
|
writeBank_SNES(0xC0, 0x0000, 0xd0);
|
|
// Read Extended Status Register (GSR and PSR)
|
|
writeBank_SNES(0xC0, 0x0000, 0x71);
|
|
// Page Buffer Swap
|
|
writeBank_SNES(0xC0, 0x0000, 0x72);
|
|
// Read Page Buffer
|
|
writeBank_SNES(0xC0, 0x0000, 0x75);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Read the mapping info out of the 1st chip
|
|
for (unsigned long currByte = 0xFF00; currByte <= 0xFFFF; currByte++) {
|
|
if (readBank_SNES(0xC0, currByte) != 0xFF) {
|
|
blank = 0;
|
|
}
|
|
}
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset to defaults
|
|
writeBank_SNES(0xE0, 0x0000, 0x38);
|
|
writeBank_SNES(0xE0, 0x0000, 0xd0);
|
|
// Read Extended Status Register (GSR and PSR)
|
|
writeBank_SNES(0xE0, 0x0000, 0x71);
|
|
// Page Buffer Swap
|
|
writeBank_SNES(0xE0, 0x0000, 0x72);
|
|
// Read Page Buffer
|
|
writeBank_SNES(0xE0, 0x0000, 0x75);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Read the mapping info out of the 1st chip
|
|
for (unsigned long currByte = 0xFF00; currByte <= 0xFFFF; currByte++) {
|
|
if (readBank_SNES(0xE0, currByte) != 0xFF) {
|
|
blank = 0;
|
|
}
|
|
}
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Reset Flash
|
|
writeBank_SNES(0xC0, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(0xC0, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(0xC0, 0x5555L * 2, 0xf0);
|
|
|
|
// Reset Flash
|
|
writeBank_SNES(0xE0, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(0xE0, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(0xE0, 0x5555L * 2, 0xf0);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
return blank;
|
|
}
|
|
|
|
void writeMapping(byte startBank, uint32_t pos) {
|
|
|
|
if (unlockHirom()) {
|
|
// Get ID
|
|
idFlash_NP(startBank);
|
|
if (strcmp(flashid, "c2f3") == 0) {
|
|
resetFlash_NP(startBank);
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Open file on sd card
|
|
if (myFile.open(filePath, O_READ)) {
|
|
|
|
// Seek to a new position in the file
|
|
if (pos != 0)
|
|
myFile.seekCur(pos);
|
|
|
|
// Write to Page Buffer
|
|
for (unsigned long currByte = 0xFF00; currByte < 0xFFFF; currByte += 128) {
|
|
// Prepare to erase/write Page Buffer
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0x77);
|
|
// Write Page Buffer Command
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0xaa);
|
|
writeBank_SNES(startBank, 0x2AAAL * 2, 0x55);
|
|
writeBank_SNES(startBank, 0x5555L * 2, 0x99);
|
|
|
|
myFile.read(sdBuffer, 128);
|
|
|
|
for (byte c = 0; c < 128; c++) {
|
|
writeBank_SNES(startBank, currByte + c, sdBuffer[c]);
|
|
// Write last byte twice
|
|
if (c == 127) {
|
|
writeBank_SNES(startBank, currByte + c, sdBuffer[c]);
|
|
}
|
|
}
|
|
busyCheck_NP(startBank);
|
|
}
|
|
|
|
// Close the file:
|
|
myFile.close();
|
|
println_Msg("");
|
|
}
|
|
else {
|
|
print_Error(F("Can't open file on SD"), false);
|
|
}
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
}
|
|
else {
|
|
print_Error(F("Error: Wrong Flash ID"), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("Unlock failed"), true);
|
|
}
|
|
}
|
|
|
|
/******************************************
|
|
Nintendo Power functions
|
|
*****************************************/
|
|
// Switch to HiRom All and unlock Write Protection
|
|
boolean unlockHirom() {
|
|
romType = 1;
|
|
print_Msg(F("Switch to HiRom..."));
|
|
display_Update();
|
|
if (send_NP(0x04) == 0x2A) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
// Unlock Write Protection
|
|
print_Msg(F("Enable Write..."));
|
|
display_Update();
|
|
send_NP(0x02);
|
|
if (readBank_SNES(0, 0x2401) == 0x4) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
return 1;
|
|
}
|
|
else {
|
|
println_Msg(F("failed"));
|
|
display_Update();
|
|
return 0;
|
|
}
|
|
}
|
|
else {
|
|
println_Msg(F("failed"));
|
|
display_Update();
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
// Send a command to the MX15001 chip
|
|
byte send_NP(byte command) {
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
// Write command
|
|
writeBank_SNES(0, 0x2400, 0x09);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Read status
|
|
NPReady = readBank_SNES(0, 0x2400);
|
|
|
|
// Switch to write
|
|
dataOut();
|
|
controlOut_SNES();
|
|
|
|
writeBank_SNES(0, 0x2401, 0x28);
|
|
writeBank_SNES(0, 0x2401, 0x84);
|
|
|
|
// NP_CMD_06h, send this only if above read has returned 7Dh, not if it's already returning 2Ah
|
|
if (NPReady == 0x7D) {
|
|
writeBank_SNES(0, 0x2400, 0x06);
|
|
writeBank_SNES(0, 0x2400, 0x39);
|
|
}
|
|
|
|
// Write the command
|
|
writeBank_SNES(0, 0x2400, command);
|
|
|
|
// Switch to read
|
|
dataIn();
|
|
controlIn_SNES();
|
|
|
|
// Read status
|
|
NPReady = readBank_SNES(0, 0x2400);
|
|
return NPReady;
|
|
}
|
|
|
|
// This function will erase and program the NP cart from a 4MB file off the SD card
|
|
void write_NP(int startBank, uint32_t pos) {
|
|
// Switch NP cart's mapping
|
|
if (unlockHirom()) {
|
|
// Get ID
|
|
idFlash_NP(startBank);
|
|
if (strcmp(flashid, "c2f3") == 0) {
|
|
print_Msg(F("Flash ID: "));
|
|
println_Msg(flashid);
|
|
display_Update();
|
|
resetFlash_NP(startBank);
|
|
delay(1000);
|
|
// Erase flash
|
|
print_Msg(F("Blankcheck..."));
|
|
display_Update();
|
|
if (blankcheck_NP(startBank)) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
}
|
|
else {
|
|
println_Msg(F("Nope"));
|
|
display_Clear();
|
|
print_Msg(F("Erasing..."));
|
|
display_Update();
|
|
eraseFlash_NP(startBank);
|
|
resetFlash_NP(startBank);
|
|
println_Msg(F("Done"));
|
|
print_Msg(F("Blankcheck..."));
|
|
display_Update();
|
|
if (blankcheck_NP(startBank)) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
}
|
|
else {
|
|
print_Error(F("Could not erase flash"), true);
|
|
}
|
|
}
|
|
// Write flash
|
|
writeFlash_NP(startBank, pos);
|
|
|
|
// Reset flash
|
|
resetFlash_NP(startBank);
|
|
|
|
// Checking for errors
|
|
print_Msg(F("Verifying..."));
|
|
display_Update();
|
|
writeErrors = verifyFlash_NP(startBank, pos);
|
|
if (writeErrors == 0) {
|
|
println_Msg(F("OK"));
|
|
display_Update();
|
|
}
|
|
else {
|
|
print_Msg(F("Error: "));
|
|
print_Msg(writeErrors);
|
|
println_Msg(F(" bytes "));
|
|
print_Error(F("did not verify."), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("Error: Wrong Flash ID"), true);
|
|
}
|
|
}
|
|
else {
|
|
print_Error(F("Unlock failed"), true);
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// End of File
|
|
//******************************************
|