cartreader/pcb/adapters

nes_adapter.zip is an add-on for reading NES carts, PCB thickness needs to be changed to 1.2mm, this is very important or else it won't fit into the SNES slot. You can order a 2.5mm 72pin NES slot here.

famicom_adapter.zip is an add-on for reading Famicom carts, PCB thickness needs to be changed to 1.2mm, this is very important or else it won't fit into the SNES slot. You can order a 2.54mm 60pin Famicom slot here.

sms_adapter.zip is an add-on for reading Sega Master System carts. You can order a 2.54mm 50pin SMS slot here. The adapter is based on the design by Raphnet. For use with the Cart Reader ignore the SMD footprints on the PCB, the adapter does not need any components. I only bridged R5 to connect the reset line, although I'm not sure if this is even needed. Unlike the other adapters this one plugs into the MD slot.

wonderswan_adapter.zip is an add-on for reading WonderSwan carts. PCB thickness needs to be changed to 1.2mm, this is very important or else it won't fit into the SNES slot. (Optional) Install C1 and C2 with 10uF/16v 1210 package tantalum capacitor.

flash_adapter.zip is an add-on for writing flashroms like the 29F032, 29L3211, 29LV160, PCB thickness needs to be changed to 1.2mm, this is very important or else it won't fit into the SNES slot.

eprom_adapter.zip is an add-on for writing an 27C322 eprom, PCB thickness needs to be changed to 1.2mm, this is very important or else it won't fit into the SNES slot.

With the sd_adapter PCB you can transform the microSD module from the parts list into a full size SD module by desoldering all the components and soldering them to this PCB. This is optional since you can also just mount the microSD module as is.

For Oshpark you need to rename filename.GML to filename.GKO or it won't find the board outline. Oshpark is great for ordering the smaller PCBs but very expensive for larger boards.