Mirrors/cartreader
2
0
Fork 0
mirror of https://github.com/sanni/cartreader.git synced 2024-11-11 07:25:07 +01:00
Code Issues Projects Releases Wiki Activity
f1c6d29824
cartreader/Cart_Reader/N64.ino
majorpbx f1c6d29824 Update N64.ino 
Added CRC 1 and 2 reading support for N64 ROMs.
Added RTC support for N64 ROM dumps.
2021-10-02 01:25:44 -04:00

4469 lines
125 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

//******************************************
// NINTENDO 64 MODULE
//******************************************
#include "options.h"
#ifdef enable_N64
#include "snes_clk.h"
// Include Cart_Reader.ino to allow for calling istablished functions
#ifdef RTC_installed
#include "RTC.h"
#endif
/******************************************
Defines
*****************************************/
// These two macros toggle the eepDataPin/ControllerDataPin between input and output
// External 1K pull-up resistor from eepDataPin to VCC required
// 0x10 = 00010000 -> Port H Pin 4
#define N64_HIGH DDRH &= ~0x10
#define N64_LOW DDRH |= 0x10
// Read the current state(0/1) of the eepDataPin
#define N64_QUERY (PINH & 0x10)
/******************************************
Variables
*****************************************/
// Received N64 Eeprom data bits, 1 page
bool tempBits[65];
int eepPages;
// N64 Controller
// 256 bits of received Controller data
char N64_raw_dump[257];
// Array that holds one Controller Pak block of 32 bytes
byte myBlock[33];
String rawStr = ""; // above char array read into a string
struct {
char stick_x;
char stick_y;
}
N64_status;
//stings that hold the buttons
String button = "N/A";
String lastbutton = "N/A";
// Rom base address
unsigned long romBase = 0x10000000;
// Flashram type
byte flashramType = 1;
boolean MN63F81MPN = false;
//ControllerTest
bool quit = 1;
/******************************************
Menu
*****************************************/
// N64 start menu
static const char n64MenuItem1[] PROGMEM = "Game Cartridge";
static const char n64MenuItem2[] PROGMEM = "Controller";
static const char n64MenuItem3[] PROGMEM = "Flash Repro";
static const char n64MenuItem4[] PROGMEM = "Flash Gameshark";
static const char n64MenuItem5[] PROGMEM = "Reset";
static const char* const menuOptionsN64[] PROGMEM = {n64MenuItem1, n64MenuItem2, n64MenuItem3, n64MenuItem4, n64MenuItem5};
// N64 controller menu items
static const char N64ContMenuItem1[] PROGMEM = "Test Controller";
static const char N64ContMenuItem2[] PROGMEM = "Read ControllerPak";
static const char N64ContMenuItem3[] PROGMEM = "Write ControllerPak";
static const char N64ContMenuItem4[] PROGMEM = "Reset";
static const char* const menuOptionsN64Controller[] PROGMEM = {N64ContMenuItem1, N64ContMenuItem2, N64ContMenuItem3, N64ContMenuItem4};
// N64 cart menu items
static const char N64CartMenuItem1[] PROGMEM = "Read Rom";
static const char N64CartMenuItem2[] PROGMEM = "Read Save";
static const char N64CartMenuItem3[] PROGMEM = "Write Save";
static const char N64CartMenuItem4[] PROGMEM = "Force Savetype";
static const char N64CartMenuItem5[] PROGMEM = "Reset";
static const char* const menuOptionsN64Cart[] PROGMEM = {N64CartMenuItem1, N64CartMenuItem2, N64CartMenuItem3, N64CartMenuItem4, N64CartMenuItem5};
// N64 CRC32 error menu items
static const char N64CRCMenuItem1[] PROGMEM = "No";
static const char N64CRCMenuItem2[] PROGMEM = "Yes and keep old";
static const char N64CRCMenuItem3[] PROGMEM = "Yes and delete old";
static const char N64CRCMenuItem4[] PROGMEM = "Reset";
static const char* const menuOptionsN64CRC[] PROGMEM = {N64CRCMenuItem1, N64CRCMenuItem2, N64CRCMenuItem3, N64CRCMenuItem4};
// Rom menu
static const char N64RomItem1[] PROGMEM = "4MB";
static const char N64RomItem2[] PROGMEM = "8MB";
static const char N64RomItem3[] PROGMEM = "12MB";
static const char N64RomItem4[] PROGMEM = "16MB";
static const char N64RomItem5[] PROGMEM = "32MB";
static const char N64RomItem6[] PROGMEM = "64MB";
static const char* const romOptionsN64[] PROGMEM = {N64RomItem1, N64RomItem2, N64RomItem3, N64RomItem4, N64RomItem5, N64RomItem6};
// Save menu
static const char N64SaveItem1[] PROGMEM = "None";
static const char N64SaveItem2[] PROGMEM = "4K EEPROM";
static const char N64SaveItem3[] PROGMEM = "16K EEPROM";
static const char N64SaveItem4[] PROGMEM = "SRAM";
static const char N64SaveItem5[] PROGMEM = "FLASHRAM";
static const char* const saveOptionsN64[] PROGMEM = {N64SaveItem1, N64SaveItem2, N64SaveItem3, N64SaveItem4, N64SaveItem5};
// Repro write buffer menu
static const char N64BufferItem1[] PROGMEM = "no buffer";
static const char N64BufferItem2[] PROGMEM = "32 Byte";
static const char N64BufferItem3[] PROGMEM = "64 Byte";
static const char N64BufferItem4[] PROGMEM = "128 Byte";
static const char* const bufferOptionsN64[] PROGMEM = {N64BufferItem1, N64BufferItem2, N64BufferItem3, N64BufferItem4};
// Repro sector size menu
static const char N64SectorItem1[] PROGMEM = "8 KByte";
static const char N64SectorItem2[] PROGMEM = "32 KByte";
static const char N64SectorItem3[] PROGMEM = "64 KByte";
static const char N64SectorItem4[] PROGMEM = "128 KByte";
static const char* const sectorOptionsN64[] PROGMEM = {N64SectorItem1, N64SectorItem2, N64SectorItem3, N64SectorItem4};
// N64 start menu
void n64Menu() {
// create menu with title and 5 options to choose from
unsigned char n64Dev;
// Copy menuOptions out of progmem
convertPgm(menuOptionsN64, 5);
n64Dev = question_box(F("Select N64 device"), menuOptions, 5, 0);
// wait for user choice to come back from the question box menu
switch (n64Dev)
{
case 0:
display_Clear();
display_Update();
setup_N64_Cart();
printCartInfo_N64();
mode = mode_N64_Cart;
break;
case 1:
display_Clear();
display_Update();
setup_N64_Controller();
mode = mode_N64_Controller;
break;
case 2:
display_Clear();
display_Update();
setup_N64_Cart();
flashRepro_N64();
printCartInfo_N64();
mode = mode_N64_Cart;
break;
case 3:
display_Clear();
display_Update();
setup_N64_Cart();
flashGameshark_N64();
printCartInfo_N64();
mode = mode_N64_Cart;
break;
case 4:
resetArduino();
break;
}
}
// N64 Controller Menu
void n64ControllerMenu() {
// create menu with title and 4 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsN64Controller, 4);
mainMenu = question_box(F("N64 Controller"), menuOptions, 4, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu)
{
case 0:
display_Clear();
display_Update();
controllerTest();
quit = 1;
break;
case 1:
display_Clear();
display_Update();
readMPK();
println_Msg(F(""));
println_Msg(F("Press Button."));
display_Update();
wait();
break;
case 2:
display_Clear();
display_Update();
// Change to root
filePath[0] = '\0';
sd.chdir("/");
// Launch file browser
fileBrowser(F("Select mpk file"));
display_Clear();
display_Update();
writeMPK();
verifyMPK();
println_Msg(F(""));
println_Msg(F("Press Button."));
display_Update();
wait();
break;
case 3:
resetArduino();
break;
}
}
// N64 Cartridge Menu
void n64CartMenu() {
// create menu with title and 4 options to choose from
unsigned char mainMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsN64Cart, 5);
mainMenu = question_box(F("N64 Cart Reader"), menuOptions, 5, 0);
// wait for user choice to come back from the question box menu
switch (mainMenu)
{
case 0:
sd.chdir("/");
readRom_N64();
break;
case 1:
sd.chdir("/");
display_Clear();
if (saveType == 1) {
println_Msg(F("Reading Sram..."));
display_Update();
readSram(32768, 1);
}
else if (saveType == 4) {
getFramType();
println_Msg(F("Reading Flashram..."));
display_Update();
readFram(flashramType);
}
else if ((saveType == 5) || (saveType == 6)) {
println_Msg(F("Reading Eep..."));
display_Update();
#ifdef clockgen_installed
readEeprom();
#else
readEeprom_CLK();
#endif
}
else {
print_Error(F("Savetype Error"), false);
}
println_Msg(F(""));
println_Msg(F("Press Button..."));
display_Update();
wait();
break;
case 2:
filePath[0] = '\0';
sd.chdir("/");
if (saveType == 1) {
// Launch file browser
fileBrowser(F("Select sra file"));
display_Clear();
writeSram(32768);
writeErrors = verifySram(32768, 1);
if (writeErrors == 0) {
println_Msg(F("Sram verified OK"));
display_Update();
}
else {
print_Msg(F("Error: "));
print_Msg(writeErrors);
println_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
}
else if (saveType == 4) {
// Launch file browser
fileBrowser(F("Select fla file"));
display_Clear();
getFramType();
writeFram(flashramType);
print_Msg(F("Verifying..."));
display_Update();
writeErrors = verifyFram(flashramType);
if (writeErrors == 0) {
println_Msg(F("OK"));
display_Update();
}
else {
println_Msg("");
print_Msg(F("Error: "));
print_Msg(writeErrors);
println_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
}
else if ((saveType == 5) || (saveType == 6)) {
// Launch file browser
fileBrowser(F("Select eep file"));
display_Clear();
#ifdef clockgen_installed
writeEeprom();
writeErrors = verifyEeprom();
#else
writeEeprom_CLK();
writeErrors = verifyEeprom_CLK();
#endif
if (writeErrors == 0) {
println_Msg(F("Eeprom verified OK"));
display_Update();
}
else {
print_Msg(F("Error: "));
print_Msg(writeErrors);
println_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
}
else {
display_Clear();
print_Error(F("Savetype Error"), false);
}
println_Msg(F("Press Button..."));
display_Update();
wait();
break;
case 3:
// create submenu with title and 6 options to choose from
unsigned char N64SaveMenu;
// Copy menuOptions out of progmem
convertPgm(saveOptionsN64, 5);
N64SaveMenu = question_box(F("Select save type"), menuOptions, 5, 0);
// wait for user choice to come back from the question box menu
switch (N64SaveMenu)
{
case 0:
// None
saveType = 0;
break;
case 1:
// 4K EEPROM
saveType = 5;
eepPages = 64;
break;
case 2:
// 16K EEPROM
saveType = 6;
eepPages = 256;
break;
case 3:
// SRAM
saveType = 1;
break;
case 4:
// FLASHRAM
saveType = 4;
break;
}
break;
case 4:
resetArduino();
break;
}
}
/******************************************
Setup
*****************************************/
void setup_N64_Controller() {
// Output a low signal
PORTH &= ~(1 << 4);
// Set Controller Data Pin(PH4) to Input
DDRH &= ~(1 << 4);
}
void setup_N64_Cart() {
// Set Address Pins to Output and set them low
//A0-A7
DDRF = 0xFF;
PORTF = 0x00;
//A8-A15
DDRK = 0xFF;
PORTK = 0x00;
// Set Control Pins to Output RESET(PH0) WR(PH5) RD(PH6) aleL(PC0) aleH(PC1)
DDRH |= (1 << 0) | (1 << 5) | (1 << 6);
DDRC |= (1 << 0) | (1 << 1);
// Pull RESET(PH0) low until we are ready
PORTH &= ~(1 << 0);
// Output a high signal on WR(PH5) RD(PH6), pins are active low therefore everything is disabled now
PORTH |= (1 << 5) | (1 << 6);
// Pull aleL(PC0) low and aleH(PC1) high
PORTC &= ~(1 << 0);
PORTC |= (1 << 1);
#ifdef clockgen_installed
// Adafruit Clock Generator
// last number is the clock correction factor which is custom for each clock generator
int32_t clock_offset = readClockOffset();
if (clock_offset > INT32_MIN) {
clockgen.init(SI5351_CRYSTAL_LOAD_8PF, 0, clock_offset);
} else {
clockgen.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
}
// Set Eeprom clock to 2Mhz
clockgen.set_freq(200000000ULL, SI5351_CLK1);
// Start outputting Eeprom clock
clockgen.output_enable(SI5351_CLK1, 1); // Eeprom clock
#else
// Set Eeprom Clock Pin(PH1) to Output
DDRH |= (1 << 1);
// Output a high signal
PORTH |= (1 << 1);
#endif
// Set Eeprom Data Pin(PH4) to Input
DDRH &= ~(1 << 4);
// Activate Internal Pullup Resistors
//PORTH |= (1 << 4);
// Set sram base address
sramBase = 0x08000000;
#ifdef clockgen_installed
// Wait for clock generator
clockgen.update_status();
#endif
// Wait until all is stable
delay(300);
// Pull RESET(PH0) high to start eeprom
PORTH |= (1 << 0);
}
/******************************************
Low level functions
*****************************************/
// Switch Cartridge address/data pins to write
void adOut_N64() {
//A0-A7
DDRF = 0xFF;
PORTF = 0x00;
//A8-A15
DDRK = 0xFF;
PORTK = 0x00;
}
// Switch Cartridge address/data pins to read
void adIn_N64() {
//A0-A7
DDRF = 0x00;
//A8-A15
DDRK = 0x00;
//Enable internal pull-up resistors
//PORTF = 0xFF;
//PORTK = 0xFF;
}
// Set Cartridge address
void setAddress_N64(unsigned long myAddress) {
// Set address pins to output
adOut_N64();
// Split address into two words
word myAdrLowOut = myAddress & 0xFFFF;
word myAdrHighOut = myAddress >> 16;
// Switch WR(PH5) RD(PH6) ale_L(PC0) ale_H(PC1) to high (since the pins are active low)
PORTH |= (1 << 5) | (1 << 6);
PORTC |= (1 << 1);
__asm__("nop\n\t");
PORTC |= (1 << 0);
// Output high part to address pins
PORTF = myAdrHighOut & 0xFF;
PORTK = (myAdrHighOut >> 8) & 0xFF;
// Leave ale_H high for additional 62.5ns
__asm__("nop\n\t");
// Pull ale_H(PC1) low
PORTC &= ~(1 << 1);
// Output low part to address pins
PORTF = myAdrLowOut & 0xFF;
PORTK = (myAdrLowOut >> 8) & 0xFF;
// Leave ale_L high for ~125ns
__asm__("nop\n\t""nop\n\t");
// Pull ale_L(PC0) low
PORTC &= ~(1 << 0);
// Wait ~600ns just to be sure address is set
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Set data pins to input
adIn_N64();
}
// Read one word out of the cartridge
word readWord_N64() {
// Pull read(PH6) low
PORTH &= ~(1 << 6);
// Wait ~310ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Join bytes from PINF and PINK into a word
word tempWord = ( ( PINK & 0xFF ) << 8 ) | ( PINF & 0xFF );
// Pull read(PH6) high
PORTH |= (1 << 6);
// Wait 62.5ns
__asm__("nop\n\t");
return tempWord;
}
// Write one word to data pins of the cartridge
void writeWord_N64(word myWord) {
// Set address pins to output
adOut_N64();
// Output word to AD0-AD15
PORTF = myWord & 0xFF;
PORTK = (myWord >> 8) & 0xFF;
// Wait ~62.5ns
__asm__("nop\n\t");
// Pull write(PH5) low
PORTH &= ~(1 << 5);
// Wait ~310ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Pull write(PH5) high
PORTH |= (1 << 5);
// Wait ~125ns
__asm__("nop\n\t""nop\n\t");
// Set data pins to input
adIn_N64();
}
/******************************************
N64 Controller CRC Functions
*****************************************/
static word addrCRC(word address) {
// CRC table
word xor_table[16] = { 0x0, 0x0, 0x0, 0x0, 0x0, 0x15, 0x1F, 0x0B, 0x16, 0x19, 0x07, 0x0E, 0x1C, 0x0D, 0x1A, 0x01 };
word crc = 0;
// Make sure we have a valid address
address &= ~0x1F;
// Go through each bit in the address, and if set, xor the right value into the output
for (int i = 15; i >= 5; i--) {
// Is this bit set?
if ( ((address >> i) & 0x1)) {
crc ^= xor_table[i];
}
}
// Just in case
crc &= 0x1F;
// Create a new address with the CRC appended
return address | crc;
}
// unused
//static byte dataCRC(byte * data) {
// byte ret = 0;
// for (byte i = 0; i <= 32; i++) {
// for (byte j = 7; j >= 0; j--) {
// int tmp = 0;
// if (ret & 0x80) {
// tmp = 0x85;
// }
// ret <<= 1;
// if ( i < 32 ) {
// if (data[i] & (0x01 << j)) {
// ret |= 0x1;
// }
// }
// ret ^= tmp;
// }
// }
// return ret;
//}
/******************************************
N64 Controller Protocol Functions
*****************************************/
void N64_send(unsigned char *buffer, char length) {
// Send these bytes
char bits;
// This routine is very carefully timed by examining the assembly output.
// Do not change any statements, it could throw the timings off
//
// We get 16 cycles per microsecond, which should be plenty, but we need to
// be conservative. Most assembly ops take 1 cycle, but a few take 2
//
// I use manually constructed for-loops out of gotos so I have more control
// over the outputted assembly. I can insert nops where it was impossible
// with a for loop
asm volatile (";Starting outer for loop");
outer_loop:
{
asm volatile (";Starting inner for loop");
bits = 8;
inner_loop:
{
// Starting a bit, set the line low
asm volatile (";Setting line to low");
N64_LOW; // 1 op, 2 cycles
asm volatile (";branching");
if (*buffer >> 7) {
asm volatile (";Bit is a 1");
// 1 bit
// remain low for 1us, then go high for 3us
// nop block 1
asm volatile ("nop\nnop\nnop\nnop\nnop\n");
asm volatile (";Setting line to high");
N64_HIGH;
// nop block 2
// we'll wait only 2us to sync up with both conditions
// at the bottom of the if statement
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
);
}
else {
asm volatile (";Bit is a 0");
// 0 bit
// remain low for 3us, then go high for 1us
// nop block 3
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\n");
asm volatile (";Setting line to high");
N64_HIGH;
// wait for 1us
asm volatile ("; end of conditional branch, need to wait 1us more before next bit");
}
// end of the if, the line is high and needs to remain
// high for exactly 16 more cycles, regardless of the previous
// branch path
asm volatile (";finishing inner loop body");
--bits;
if (bits != 0) {
// nop block 4
// this block is why a for loop was impossible
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\n");
// rotate bits
asm volatile (";rotating out bits");
*buffer <<= 1;
goto inner_loop;
} // fall out of inner loop
}
asm volatile (";continuing outer loop");
// In this case: the inner loop exits and the outer loop iterates,
// there are /exactly/ 16 cycles taken up by the necessary operations.
// So no nops are needed here (that was lucky!)
--length;
if (length != 0) {
++buffer;
goto outer_loop;
} // fall out of outer loop
}
}
void N64_stop() {
// send a single stop (1) bit
// nop block 5
asm volatile ("nop\nnop\nnop\nnop\n");
N64_LOW;
// wait 1 us, 16 cycles, then raise the line
// 16-2=14
// nop block 6
asm volatile ("nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\n");
N64_HIGH;
}
void N64_get(word bitcount) {
// listen for the expected bitcount/8 bytes of data back from the controller and
// blast it out to the N64_raw_dump array, one bit per byte for extra speed.
asm volatile (";Starting to listen");
unsigned char timeout;
char *bitbin = N64_raw_dump;
// Again, using gotos here to make the assembly more predictable and
// optimization easier (please don't kill me)
read_loop:
timeout = 0x3f;
// wait for line to go low
while (N64_QUERY) {
if (!--timeout)
return;
}
// wait approx 2us and poll the line
asm volatile (
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
"nop\nnop\nnop\nnop\nnop\n"
);
*bitbin = N64_QUERY;
++bitbin;
--bitcount;
if (bitcount == 0)
return;
// wait for line to go high again
// it may already be high, so this should just drop through
timeout = 0x3f;
while (!N64_QUERY) {
if (!--timeout)
return;
}
goto read_loop;
}
/******************************************
N64 Controller Functions
*****************************************/
void get_button()
{
// Command to send to the gamecube
// The last bit is rumble, flip it to rumble
// yes this does need to be inside the loop, the
// array gets mutilated when it goes through N64_send
unsigned char command[] = {
0x01
};
// don't want interrupts getting in the way
noInterrupts();
// send those 3 bytes
N64_send(command, 1);
N64_stop();
// read in 32bits of data and dump it to N64_raw_dump
N64_get(32);
// end of time sensitive code
interrupts();
// The get_N64_status function sloppily dumps its data 1 bit per byte
// into the get_status_extended char array. It's our job to go through
// that and put each piece neatly into the struct N64_status
int i;
memset(&N64_status, 0, sizeof(N64_status));
// bits: joystick x value
// These are 8 bit values centered at 0x80 (128)
for (i = 0; i < 8; i++) {
N64_status.stick_x |= N64_raw_dump[16 + i] ? (0x80 >> i) : 0;
}
for (i = 0; i < 8; i++) {
N64_status.stick_y |= N64_raw_dump[24 + i] ? (0x80 >> i) : 0;
}
// read char array N64_raw_dump into string rawStr
rawStr = "";
for (i = 0; i < 16; i++) {
rawStr = rawStr + String(N64_raw_dump[i], DEC);
}
// Buttons (A,B,Z,S,DU,DD,DL,DR,0,0,L,R,CU,CD,CL,CR)
if (rawStr.substring(0, 16) == "0000000000000000") {
lastbutton = button;
button = F("Press a button");
}
else
{
for (int i = 0; i < 16; i++)
{
// seems to be 16, 8 or 4 depending on what pin is used
if (N64_raw_dump[i] == 16)
{
switch (i)
{
case 7:
button = F("D-Right");
break;
case 6:
button = F("D-Left");
break;
case 5:
button = F("D-Down");
break;
case 4:
button = F("D-Up");
break;
case 3:
button = F("START");
break;
case 2:
button = F("Z");
break;
case 1:
button = F("B");
break;
case 0:
button = F("A");
break;
case 15:
button = F("C-Right");
break;
case 14:
button = F("C-Left");
break;
case 13:
button = F("C-Down");
break;
case 12:
button = F("C-Up");
break;
case 11:
button = F("R");
break;
case 10:
button = F("L");
break;
}
}
}
}
}
/******************************************
N64 Controller Test
*****************************************/
#define CENTER 64
void oledPrint(const char string[], int x, int y) {
if (x == CENTER)
x = 64 - (strlen(string) / 2) * 6;
display.setCursor(x, y);
display.print(string);
}
void oledPrint(int number, int x, int y) {
display.setCursor(x, y);
display.print(number);
}
void printSTR(String st, int x, int y)
{
char buf[st.length() + 1];
st.toCharArray(buf, st.length() + 1);
oledPrint(buf, x, y);
}
void controllerTest() {
// on which screens do we start
int startscreen = 1;
int mode = 0;
int test = 1;
//name of the current displayed result
String anastick = "";
int prevStickX = 0;
// Graph
int xax = 22 + 24; // midpoint x
int yax = 24; // midpoint y
int zax = 24; // size
// variables to display test data of different sticks
int upx = 0;
int upy = 0;
int uprightx = 0;
int uprighty = 0;
int rightx = 0;
int righty = 0;
int downrightx = 0;
int downrighty = 0;
int downx = 0;
int downy = 0;
int downleftx = 0;
int downlefty = 0;
int leftx = 0;
int lefty = 0;
int upleftx = 0;
int uplefty = 0;
// variables to save test data
int bupx = 0;
int bupy = 0;
int buprightx = 0;
int buprighty = 0;
int brightx = 0;
int brighty = 0;
int bdownrightx = 0;
int bdownrighty = 0;
int bdownx = 0;
int bdowny = 0;
int bdownleftx = 0;
int bdownlefty = 0;
int bleftx = 0;
int blefty = 0;
int bupleftx = 0;
int buplefty = 0;
int results = 0;
while (quit) {
// Get Button and analog stick
get_button();
switch (startscreen)
{
case 1:
{
display.clearDisplay();
oledPrint("Button Test", CENTER, 0);
display.drawLine(22 + 0, 10, 22 + 84, 10, WHITE);
// Print Button
printSTR(" " + button + " ", CENTER, 20);
// Print Stick X Value
String stickx = String("X: " + String(N64_status.stick_x, DEC) + " ");
printSTR(stickx, 22 + 0, 38);
// Print Stick Y Value
String sticky = String("Y: " + String(N64_status.stick_y, DEC) + " ");
printSTR(sticky, 22 + 60, 38);
printSTR("(Continue with START)", 0, 55);
//Update LCD
display.display();
// go to next screen
if (button == "Press a button" && lastbutton == "START")
{
// reset button
lastbutton = "N/A";
display.clearDisplay();
if (startscreen != 4)
startscreen = startscreen + 1;
else
{
startscreen = 1;
test = 1;
}
}
else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
{
// Quit
quit = 0;
}
break;
}
case 2:
{
oledPrint("Range Test", CENTER, 55);
display.drawLine(22 + 0, 50, 22 + 84, 50, WHITE);
// Print Stick X Value
String stickx = String("X:" + String(N64_status.stick_x, DEC) + " ");
printSTR(stickx, 22 + 54, 8);
// Print Stick Y Value
String sticky = String("Y:" + String(N64_status.stick_y, DEC) + " ");
printSTR(sticky, 22 + 54, 18);
// Draw Axis
//display.drawLine(xax - zax, yax, xax + zax, yax, WHITE);
//display.drawLine(xax, yax - zax, xax, yax + zax, WHITE);
display.drawPixel(xax, yax, WHITE);
display.drawPixel(xax, yax - 80 / 4, WHITE);
display.drawPixel(xax, yax + 80 / 4, WHITE);
display.drawPixel(xax + 80 / 4, yax, WHITE);
display.drawPixel(xax - 80 / 4, yax, WHITE);
// Draw corners
display.drawPixel(xax - 68 / 4, yax - 68 / 4, WHITE);
display.drawPixel(xax + 68 / 4, yax + 68 / 4, WHITE);
display.drawPixel(xax + 68 / 4, yax - 68 / 4, WHITE);
display.drawPixel(xax - 68 / 4, yax + 68 / 4, WHITE);
//Draw Analog Stick
if (mode == 1)
{
display.drawPixel(xax + N64_status.stick_x / 4, yax - N64_status.stick_y / 4, WHITE);
//Update LCD
display.display();
}
else
{
display.drawCircle(xax + N64_status.stick_x / 4, yax - N64_status.stick_y / 4, 2, WHITE);
//Update LCD
display.display();
display.clearDisplay();
}
// switch mode
if (button == "Press a button" && lastbutton == "Z")
{
if (mode == 0)
{
mode = 1;
display.clearDisplay();
}
else
{
mode = 0;
display.clearDisplay();
}
}
// go to next screen
if (button == "Press a button" && lastbutton == "START")
{
// reset button
lastbutton = "N/A";
display.clearDisplay();
if (startscreen != 4)
startscreen = startscreen + 1;
else
{
startscreen = 1;
test = 1;
}
}
else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
{
// Quit
quit = 0;
}
break;
}
case 3:
{
display.drawPixel(22 + prevStickX, 40, BLACK);
oledPrint("Skipping Test", CENTER, 0);
display.drawLine(22 + 0, 10, 22 + 83, 10, WHITE);
display.drawRect(22 + 0, 15, 22 + 59, 21, WHITE);
if (N64_status.stick_x > 0) {
display.drawLine(22 + N64_status.stick_x, 15, 22 + N64_status.stick_x, 35, WHITE);
display.drawPixel(22 + N64_status.stick_x, 40, WHITE);
prevStickX = N64_status.stick_x;
}
printSTR("Try to fill box by", 0, 45);
printSTR("slowly moving right", 0, 55);
//Update LCD
display.display();
if (button == "Press a button" && lastbutton == "Z")
{
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
// go to next screen
if (button == "Press a button" && lastbutton == "START")
{
// reset button
lastbutton = "N/A";
display.clearDisplay();
if (startscreen != 4)
startscreen = startscreen + 1;
else
{
startscreen = 1;
test = 1;
}
}
else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
{
// Quit
quit = 0;
}
break;
}
case 4:
{
switch ( test )
{
case 0: // Display results
{
switch (results)
{
case 0:
{
anastick = "YOURS";
upx = bupx;
upy = bupy;
uprightx = buprightx;
uprighty = buprighty;
rightx = brightx;
righty = brighty;
downrightx = bdownrightx;
downrighty = bdownrighty;
downx = bdownx;
downy = bdowny;
downleftx = bdownleftx;
downlefty = bdownlefty;
leftx = bleftx;
lefty = blefty;
upleftx = bupleftx;
uplefty = buplefty;
if (button == "Press a button" && lastbutton == "A")
{
// reset button
lastbutton = "N/A";
results = 1;
}
break;
}
case 1:
{
anastick = "ORIG";
upx = 1;
upy = 84;
uprightx = 67;
uprighty = 68;
rightx = 83;
righty = -2;
downrightx = 67;
downrighty = -69;
downx = 3;
downy = -85;
downleftx = -69;
downlefty = -70;
leftx = -85;
lefty = 0;
upleftx = -68;
uplefty = 68;
if (button == "Press a button" && lastbutton == "A")
{
// reset button
lastbutton = "N/A";
results = 0;
}
break;
}
} //results
display.clearDisplay();
printSTR(anastick, 22 + 50, 0);
oledPrint("U:", 22 + 50, 10);
oledPrint(upy, 100, 10);
oledPrint("D:", 22 + 50, 20);
oledPrint(downy, 100, 20);
oledPrint("L:", 22 + 50, 30);
oledPrint(leftx, 100, 30);
oledPrint("R:", 22 + 50, 40);
oledPrint(rightx, 100, 40);
display.drawLine(xax + upx / 4, yax - upy / 4, xax + uprightx / 4, yax - uprighty / 4, WHITE);
display.drawLine(xax + uprightx / 4, yax - uprighty / 4, xax + rightx / 4, yax - righty / 4, WHITE);
display.drawLine(xax + rightx / 4, yax - righty / 4, xax + downrightx / 4, yax - downrighty / 4, WHITE);
display.drawLine(xax + downrightx / 4, yax - downrighty / 4, xax + downx / 4, yax - downy / 4, WHITE);
display.drawLine(xax + downx / 4, yax - downy / 4, xax + downleftx / 4, yax - downlefty / 4, WHITE);
display.drawLine(xax + downleftx / 4, yax - downlefty / 4, xax + leftx / 4, yax - lefty / 4, WHITE);
display.drawLine(xax + leftx / 4, yax - lefty / 4, xax + upleftx / 4, yax - uplefty / 4, WHITE);
display.drawLine(xax + upleftx / 4, yax - uplefty / 4, xax + upx / 4, yax - upy / 4, WHITE);
display.drawPixel(xax, yax, WHITE);
printSTR("(Quit with Z)", 25, 55);
//Update LCD
display.display();
break;
} //display results
case 1:// +y Up
{
oledPrint("Hold Stick Up", CENTER, 18);
oledPrint("then press A", CENTER, 28);
//myOLED.drawBitmap(110, 60, ana1);
if (button == "Press a button" && lastbutton == "A")
{
bupx = N64_status.stick_x;
bupy = N64_status.stick_y;
// reset button
lastbutton = "N/A";
display.clearDisplay();
test = 2;
}
break;
}
case 2:// +y+x Up-Right
{
oledPrint("Up-Right", CENTER, 22 );
//myOLED.drawBitmap(110, 60, ana2);
if (button == "Press a button" && lastbutton == "A")
{
buprightx = N64_status.stick_x;
buprighty = N64_status.stick_y;
test = 3;
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
break;
}
case 3:// +x Right
{
oledPrint("Right", CENTER, 22 );
//myOLED.drawBitmap(110, 60, ana3);
if (button == "Press a button" && lastbutton == "A")
{
brightx = N64_status.stick_x;
brighty = N64_status.stick_y;
test = 4;
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
break;
}
case 4:// -y+x Down-Right
{
oledPrint("Down-Right", CENTER, 22 );
//myOLED.drawBitmap(110, 60, ana4);
if (button == "Press a button" && lastbutton == "A")
{
bdownrightx = N64_status.stick_x;
bdownrighty = N64_status.stick_y;
test = 5;
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
break;
}
case 5:// -y Down
{
oledPrint("Down", CENTER, 22 );
//myOLED.drawBitmap(110, 60, ana5);
if (button == "Press a button" && lastbutton == "A")
{
bdownx = N64_status.stick_x;
bdowny = N64_status.stick_y;
test = 6;
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
break;
}
case 6:// -y-x Down-Left
{
oledPrint("Down-Left", CENTER, 22 );
//myOLED.drawBitmap(110, 60, ana6);
if (button == "Press a button" && lastbutton == "A")
{
bdownleftx = N64_status.stick_x;
bdownlefty = N64_status.stick_y;
test = 7;
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
break;
}
case 7:// -x Left
{
oledPrint("Left", CENTER, 22 );
//myOLED.drawBitmap(110, 60, ana7);
if (button == "Press a button" && lastbutton == "A")
{
bleftx = N64_status.stick_x;
blefty = N64_status.stick_y;
test = 8;
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
break;
}
case 8:// +y+x Up-Left
{
oledPrint("Up-Left", CENTER, 22);
//myOLED.drawBitmap(110, 60, ana8);
if (button == "Press a button" && lastbutton == "A")
{
bupleftx = N64_status.stick_x;
buplefty = N64_status.stick_y;
test = 0;
// reset button
lastbutton = "N/A";
display.clearDisplay();
}
break;
}
}
if (test != 0)
{
oledPrint("Benchmark", CENTER, 0);
display.drawLine(22 + 0, 9, 22 + 83, 9, WHITE);
printSTR("(Quit with Z)", 25, 55);
}
display.display();
// go to next screen
if (button == "Press a button" && lastbutton == "START")
{
// reset button
lastbutton = "N/A";
display.clearDisplay();
if (startscreen != 4)
startscreen = startscreen + 1;
else
{
startscreen = 1;
test = 1;
}
}
else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4)
{
// Quit
quit = 0;
}
break;
}
}
}
}
/******************************************
N64 Controller Pak Functions
(connected via Controller)
*****************************************/
// read 32bytes from controller pak
void readBlock(word myAddress) {
// Calculate the address CRC
word myAddressCRC = addrCRC(myAddress);
// Read Controller Pak command
unsigned char command[] = {0x02};
// Address Command
unsigned char addressHigh[] = {(unsigned char)(myAddressCRC >> 8)};
unsigned char addressLow[] = {(unsigned char)(myAddressCRC & 0xff)};
// don't want interrupts getting in the way
noInterrupts();
// send those 3 bytes
N64_send(command, 1);
N64_send(addressHigh, 1);
N64_send(addressLow, 1);
N64_stop();
// read in data
N64_get(256);
// end of time sensitive code
interrupts();
// Empty N64_raw_dump into myBlock
for (word i = 0; i < 256; i += 8) {
boolean byteFlipped[9];
// Flip byte order
byteFlipped[0] = N64_raw_dump[i + 7];
byteFlipped[1] = N64_raw_dump[i + 6];
byteFlipped[2] = N64_raw_dump[i + 5];
byteFlipped[3] = N64_raw_dump[i + 4];
byteFlipped[4] = N64_raw_dump[i + 3];
byteFlipped[5] = N64_raw_dump[i + 2];
byteFlipped[6] = N64_raw_dump[i + 1];
byteFlipped[7] = N64_raw_dump[i + 0];
// Join bits into one byte
unsigned char myByte = 0;
for (byte j = 0; j < 8; ++j) {
if (byteFlipped[j]) {
myByte |= 1 << j;
}
}
// Save byte into block array
myBlock[i / 8] = myByte;
}
}
// reads the MPK file to the sd card
void readMPK() {
// Change to root
sd.chdir("/");
// Make MPK directory
sd.mkdir("N64/MPK", true);
// Change to MPK directory
sd.chdir("N64/MPK");
// Get name, add extension and convert to char array for sd lib
EEPROM_readAnything(0, foldern);
sprintf(fileName, "%d", foldern);
strcat(fileName, ".mpk");
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
//open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("Can't open file on SD"), true);
}
println_Msg(F("Please wait..."));
display_Update();
// Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
for (word i = 0x0000; i < 0x8000; i += 32) {
// Read one block of the Controller Pak into array myBlock
readBlock(i);
// Write block to SD card
for (byte j = 0; j < 32; j++) {
myFile.write(myBlock[j]);
}
}
// Close the file:
myFile.close();
print_Msg(F("Saved as N64/MPK/"));
println_Msg(fileName);
display_Update();
}
void writeMPK() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Writing..."));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (word myAddress = 0x0000; myAddress < 0x8000; myAddress += 32) {
// Read 32 bytes into SD buffer
myFile.read(sdBuffer, 32);
// Calculate the address CRC
word myAddressCRC = addrCRC(myAddress);
// Write Controller Pak command
unsigned char command[] = {0x03};
// Address Command
unsigned char addressHigh[] = {(unsigned char)(myAddressCRC >> 8)};
unsigned char addressLow[] = {(unsigned char)(myAddressCRC & 0xff)};
// don't want interrupts getting in the way
noInterrupts();
// Send write command
N64_send(command, 1);
// Send block number
N64_send(addressHigh, 1);
N64_send(addressLow, 1);
// Send data to write
N64_send(sdBuffer, 32);
// Send stop
N64_stop();
// Enable interrupts
interrupts();
}
// Close the file:
myFile.close();
println_Msg(F("Done"));
display_Update();
}
else {
print_Error(F("Can't create file on SD"), true);
}
}
// verifies if write was successful
void verifyMPK() {
writeErrors = 0;
println_Msg(F("Verifying..."));
display_Update();
//open file on sd card
if (!myFile.open(filePath, O_RDWR | O_CREAT)) {
print_Error(F("Can't create file on SD"), true);
}
// Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
for (word i = 0x0000; i < 0x8000; i += 32) {
// Read one block of the Controller Pak into array myBlock
readBlock(i);
// Check against file on SD card
for (byte j = 0; j < 32; j++) {
if (myFile.read() != myBlock[j]) {
writeErrors++;
}
}
}
// Close the file:
myFile.close();
if (writeErrors == 0) {
println_Msg(F("OK"));
display_Update();
}
else {
print_Msg(F("Error: "));
print_Msg(writeErrors);
println_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
}
/******************************************
N64 Cartridge functions
*****************************************/
void printCartInfo_N64() {
// Check cart
getCartInfo_N64();
// Print start page
if (cartSize != 0) {
println_Msg(F("N64 Cartridge Info"));
println_Msg(F(""));
print_Msg(F("Name: "));
println_Msg(romName);
print_Msg(F("ID: "));
print_Msg(cartID);
print_Msg(F(" Size: "));
print_Msg(cartSize);
println_Msg(F("MB"));
print_Msg(F("Save: "));
switch (saveType) {
case 1:
println_Msg(F("Sram"));
break;
case 4:
println_Msg(F("Flashram"));
break;
case 5:
println_Msg(F("4K Eeprom"));
eepPages = 64;
break;
case 6:
println_Msg(F("16K Eeprom"));
eepPages = 256;
break;
default:
println_Msg(F("unknown"));
break;
}
print_Msg(F("Version: 1."));
println_Msg(romVersion);
// Wait for user input
println_Msg(F(" "));
println_Msg(F("Press Button..."));
display_Update();
wait();
}
else {
// Display error
println_Msg(F("GAMEPAK ERROR"));
println_Msg("");
print_Msg(F("Name: "));
println_Msg(romName);
print_Msg(F("ID: "));
println_Msg(cartID);
println_Msg("");
display_Update();
strcpy(romName, "GPERROR");
print_Error(F("Cartridge unknown"), false);
wait();
// Set cartsize manually
unsigned char N64RomMenu;
// Copy menuOptions out of progmem
convertPgm(romOptionsN64, 6);
N64RomMenu = question_box(F("Select ROM size"), menuOptions, 6, 0);
// wait for user choice to come back from the question box menu
switch (N64RomMenu)
{
case 0:
// 4MB
cartSize = 4;
break;
case 1:
// 8MB
cartSize = 8;
break;
case 2:
// 12MB
cartSize = 12;
break;
case 3:
// 16MB
cartSize = 16;
break;
case 4:
// 32MB
cartSize = 32;
break;
case 5:
// 64MB
cartSize = 64;
break;
}
}
}
// improved strcmp function that ignores case to prevent checksum comparison issues
int strcicmp(char const * a, char const * b)
{
for (;; a++, b++) {
int d = tolower((unsigned char) * a) - tolower((unsigned char) * b);
if (d != 0 || !*a)
return d;
}
}
#ifdef slowcrc
// Calculate dumped rom's CRC32
inline uint32_t updateCRC64(uint8_t ch, uint32_t crc) {
uint32_t idx = ((crc) ^ (ch)) & 0xff;
uint32_t tab_value = pgm_read_dword(crc_32_tab + idx);
return tab_value ^ ((crc) >> 8);
}
// Calculate rom's CRC32 from SD
uint32_t crc64() {
if (myFile.open(fileName, O_READ)) {
uint32_t oldcrc32 = 0xFFFFFFFF;
for (unsigned long currByte = 0; currByte < cartSize * 2048; currByte++) {
myFile.read(sdBuffer, 512);
for (int c = 0; c < 512; c++) {
oldcrc32 = updateCRC64(sdBuffer[c], oldcrc32);
}
}
// Close the file:
myFile.close();
return ~oldcrc32;
}
else {
print_Error(F("File not found"), true);
}
}
#endif
// look-up the calculated crc in the file n64.txt on sd card
boolean searchCRC(char crcStr[9]) {
boolean result = 0;
char tempStr2[2];
char tempStr1[9];
char tempStr[5];
// Change to root dir
sd.chdir("/");
if (myFile.open("n64.txt", O_READ)) {
// Loop through file
while (myFile.available()) {
// Read 8 bytes into String, do it one at a time so byte order doesn't get mixed up
sprintf(tempStr1, "%c", myFile.read());
for (byte i = 0; i < 7; i++) {
sprintf(tempStr2, "%c", myFile.read());
strcat(tempStr1, tempStr2);
}
// Check if string is a match
if (strcicmp(tempStr1, crcStr) == 0) {
// Skip the , in the file
myFile.seekSet(myFile.curPosition() + 1);
// Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up
sprintf(tempStr, "%c", myFile.read());
for (byte i = 0; i < 3; i++) {
sprintf(tempStr2, "%c", myFile.read());
strcat(tempStr, tempStr2);
}
if (strcmp(tempStr, cartID) == 0) {
result = 1;
break;
}
else {
result = 0;
break;
}
}
// If no match, empty string, advance by 12 and try again
else {
myFile.seekSet(myFile.curPosition() + 12);
}
}
// Close the file:
myFile.close();
return result;
}
else {
print_Error(F("n64.txt missing"), true);
}
}
// look-up cart id in file n64.txt on sd card
void getCartInfo_N64() {
char tempStr2[2];
char tempStr[5];
// cart not in list
cartSize = 0;
saveType = 0;
// Read cart id
idCart();
if (myFile.open("n64.txt", O_READ)) {
// Skip over the first crc
myFile.seekSet(myFile.curPosition() + 9);
// Loop through file
while (myFile.available()) {
// Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up
sprintf(tempStr, "%c", myFile.read());
for (byte i = 0; i < 3; i++) {
sprintf(tempStr2, "%c", myFile.read());
strcat(tempStr, tempStr2);
}
// Check if string is a match
if (strcmp(tempStr, cartID) == 0) {
// Skip the , in the file
myFile.seekSet(myFile.curPosition() + 1);
// Read the next ascii character and subtract 48 to convert to decimal
cartSize = myFile.read() - 48;
// Remove leading 0 for single digit cart sizes
if (cartSize != 0) {
cartSize = cartSize * 10 + myFile.read() - 48;
}
else {
cartSize = myFile.read() - 48;
}
// Skip the , in the file
myFile.seekSet(myFile.curPosition() + 1);
// Read the next ascii character and subtract 48 to convert to decimal
saveType = myFile.read() - 48;
}
// If no match, empty string, advance by 16 and try again
else {
myFile.seekSet(myFile.curPosition() + 16);
}
}
// Close the file:
myFile.close();
}
else {
print_Error(F("n64.txt missing"), true);
}
}
// Read rom ID
void idCart() {
// Set the address
setAddress_N64(romBase);
// Read first 64 bytes of rom
for (int c = 0; c < 64; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
// Get cart id
cartID[0] = sdBuffer[0x3B];
cartID[1] = sdBuffer[0x3C];
cartID[2] = sdBuffer[0x3D];
cartID[3] = sdBuffer[0x3E];
// Get rom version
romVersion = sdBuffer[0x3F];
// Get name
byte myLength = 0;
for (unsigned int i = 0; i < 20; i++) {
if (((char(sdBuffer[0x20 + i]) >= 48 && char(sdBuffer[0x20 + i]) <= 57) || (char(sdBuffer[0x20 + i]) >= 65 && char(sdBuffer[0x20 + i]) <= 122)) && myLength < 15) {
romName[myLength] = char(sdBuffer[0x20 + i]);
myLength++;
}
}
// Get CRC1
for (int i = 0; i < 4; i++) {
if (sdBuffer[0x10 + i] < 0x10) {
CRC1 += '0';
}
CRC1 += String(sdBuffer[0x10 + i], HEX);
}
// Get CRC2
for (int i = 0; i < 4; i++) {
if (sdBuffer[0x14 + i] < 0x10) {
CRC2 += '0';
}
CRC2 += String(sdBuffer[0x14 + i], HEX);
}
}
/******************************************
Eeprom functions (without Adafruit clockgen)
*****************************************/
// Send a clock pulse of 2us length, 50% duty, 500kHz
void pulseClock_N64(unsigned int times) {
for (unsigned int i = 0; i < (times * 2); i++) {
// Switch the clock pin to 0 if it's 1 and 0 if it's 1
PORTH ^= (1 << 1);
// without the delay the clock pulse would be 1.5us and 666kHz
//__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t"));
}
}
// Send one byte of data to eeprom
void sendData_CLK(byte data) {
for (byte i = 0; i < 8; i++) {
// pull data line low
N64_LOW;
// if current bit is 1, pull high after ~1us, 2 cycles
if (data >> 7) {
pulseClock_N64(2);
N64_HIGH;
pulseClock_N64(6);
}
// if current bit is 0 pull high after ~3us, 6 cycles
else {
pulseClock_N64(6);
N64_HIGH;
pulseClock_N64(2);
}
// rotate to the next bit
data <<= 1;
}
}
// Send stop bit to eeprom
void sendStop_CLK() {
N64_LOW;
pulseClock_N64(2);
N64_HIGH;
pulseClock_N64(4);
}
// Capture 8 bytes in 64 bits into bit array tempBits
void readData_CLK() {
for (byte i = 0; i < 64; i++) {
// pulse clock until we get response from eeprom
while (N64_QUERY) {
pulseClock_N64(1);
}
// Skip over the 1us low part of a high bit
pulseClock_N64(3);
// Read bit
tempBits[i] = N64_QUERY;
// wait for line to go high again
while (!N64_QUERY) {
pulseClock_N64(1);
}
}
}
// Write Eeprom to cartridge
void writeEeprom_CLK() {
if ((saveType == 5) || (saveType == 6)) {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Writing..."));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (byte i = 0; i < (eepPages / 64); i++) {
myFile.read(sdBuffer, 512);
// Disable interrupts for more uniform clock pulses
noInterrupts();
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
// Blink led
PORTB ^= (1 << 4);
// Wait ~50ms between page writes or eeprom will have write errors
pulseClock_N64(26000);
// Send write command
sendData_CLK(0x05);
// Send page number
sendData_CLK(pageNumber + (i * 64));
// Send data to write
for (byte j = 0; j < 8; j++) {
sendData_CLK(sdBuffer[(pageNumber * 8) + j]);
}
sendStop_CLK();
}
interrupts();
}
// Close the file:
myFile.close();
println_Msg(F("Done"));
display_Update();
delay(600);
}
else {
print_Error(F("SD Error"), true);
}
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Dump Eeprom to SD
void readEeprom_CLK() {
if ((saveType == 5) || (saveType == 6)) {
// Wait 50ms or eeprom might lock up
pulseClock_N64(26000);
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
strcat(fileName, ".eep");
// create a new folder for the save file
EEPROM_readAnything(0, foldern);
sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("Can't create file on SD"), true);
}
for (byte i = 0; i < (eepPages / 64); i++) {
// Disable interrupts for more uniform clock pulses
noInterrupts();
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
// Blink led
PORTB ^= (1 << 4);
// Send read command
sendData_CLK(0x04);
// Send Page number
sendData_CLK(pageNumber + (i * 64));
// Send stop bit
sendStop_CLK();
// read data
readData_CLK();
sendStop_CLK();
// OR 8 bits into one byte for a total of 8 bytes
for (byte j = 0; j < 64; j += 8) {
sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
}
// Wait 50ms between pages or eeprom might lock up
pulseClock_N64(26000);
}
interrupts();
// Write 64 pages at once to the SD card
myFile.write(sdBuffer, 512);
}
// Close the file:
myFile.close();
//clear the screen
display_Clear();
print_Msg(F("Saved to "));
print_Msg(folder);
println_Msg(F("/"));
display_Update();
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Check if a write succeeded, returns 0 if all is ok and number of errors if not
unsigned long verifyEeprom_CLK() {
if ((saveType == 5) || (saveType == 6)) {
writeErrors = 0;
// Wait 50ms or eeprom might lock up
pulseClock_N64(26000);
display_Clear();
print_Msg(F("Verifying against "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (byte i = 0; i < (eepPages / 64); i++) {
// Disable interrupts for more uniform clock pulses
noInterrupts();
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
// Blink led
PORTB ^= (1 << 4);
// Send read command
sendData_CLK(0x04);
// Send Page number
sendData_CLK(pageNumber + (i * 64));
// Send stop bit
sendStop_CLK();
// read data
readData_CLK();
sendStop_CLK();
// OR 8 bits into one byte for a total of 8 bytes
for (byte j = 0; j < 64; j += 8) {
sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
}
// Wait 50ms between pages or eeprom might lock up
pulseClock_N64(26000);
}
interrupts();
// Check sdBuffer content against file on sd card
for (int c = 0; c < 512; c++) {
if (myFile.read() != sdBuffer[c]) {
writeErrors++;
}
}
}
// Close the file:
myFile.close();
}
else {
// SD Error
writeErrors = 999999;
print_Error(F("SD Error"), true);
}
// Return 0 if verified ok, or number of errors
return writeErrors;
}
else {
print_Error(F("Savetype Error"), true);
}
}
/******************************************
Eeprom functions (with Adafruit clockgen)
*****************************************/
// Send one byte of data to eeprom
void sendData(byte data) {
for (byte i = 0; i < 8; i++) {
// pull data line low
N64_LOW;
// if current bit is 1, pull high after ~1us
if (data >> 7) {
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
N64_HIGH;
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
// if current bit is 0 pull high after ~3us
else {
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
N64_HIGH;
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
// rotate to the next bit
data <<= 1;
}
}
// Send stop bit to eeprom
void sendStop() {
N64_LOW;
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
N64_HIGH;
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
// Capture 8 bytes in 64 bits into bit array tempBits
void readData() {
for (byte i = 0; i < 64; i++) {
// wait until we get response from eeprom
while (N64_QUERY) {
}
// Skip over the 1us low part of a high bit, Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Read bit
tempBits[i] = N64_QUERY;
// wait for line to go high again
while (!N64_QUERY) {
__asm__("nop\n\t");
}
}
}
// Write Eeprom to cartridge
void writeEeprom() {
if ((saveType == 5) || (saveType == 6)) {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Writing..."));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (byte i = 0; i < (eepPages / 64); i++) {
myFile.read(sdBuffer, 512);
// Disable interrupts for more uniform clock pulses
noInterrupts();
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
// Blink led
PORTB ^= (1 << 4);
// Wait ~50ms between page writes or eeprom will have write errors, Arduino running at 16Mhz -> one nop = 62.5ns
for (long i = 0; i < 115000; i++) {
__asm__("nop\n\t");
}
// Send write command
sendData(0x05);
// Send page number
sendData(pageNumber + (i * 64));
// Send data to write
for (byte j = 0; j < 8; j++) {
sendData(sdBuffer[(pageNumber * 8) + j]);
}
sendStop();
}
interrupts();
}
// Close the file:
myFile.close();
println_Msg(F("Done"));
display_Update();
delay(600);
}
else {
print_Error(F("SD Error"), true);
}
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Dump Eeprom to SD
void readEeprom() {
if ((saveType == 5) || (saveType == 6)) {
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
strcat(fileName, ".eep");
// create a new folder for the save file
EEPROM_readAnything(0, foldern);
sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("Can't create file on SD"), true);
}
for (byte i = 0; i < (eepPages / 64); i++) {
// Disable interrupts for more uniform clock pulses
noInterrupts();
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
// Blink led
PORTB ^= (1 << 4);
// Send read command
sendData(0x04);
// Send Page number
sendData(pageNumber + (i * 64));
// Send stop bit
sendStop();
// read data
readData();
sendStop();
// OR 8 bits into one byte for a total of 8 bytes
for (byte j = 0; j < 64; j += 8) {
sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
}
// Wait ~600us between pages
for (int i = 0; i < 2000; i++) {
__asm__("nop\n\t");
}
}
interrupts();
// Write 64 pages at once to the SD card
myFile.write(sdBuffer, 512);
}
// Close the file:
myFile.close();
//clear the screen
display_Clear();
print_Msg(F("Saved to "));
print_Msg(folder);
println_Msg(F("/"));
display_Update();
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Check if a write succeeded, returns 0 if all is ok and number of errors if not
unsigned long verifyEeprom() {
if ((saveType == 5) || (saveType == 6)) {
writeErrors = 0;
display_Clear();
print_Msg(F("Verifying against "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (byte i = 0; i < (eepPages / 64); i++) {
// Disable interrupts for more uniform clock pulses
noInterrupts();
for (byte pageNumber = 0; pageNumber < 64; pageNumber++) {
// Blink led
PORTB ^= (1 << 4);
// Send read command
sendData(0x04);
// Send Page number
sendData(pageNumber + (i * 64));
// Send stop bit
sendStop();
// read data
readData();
sendStop();
// OR 8 bits into one byte for a total of 8 bytes
for (byte j = 0; j < 64; j += 8) {
sdBuffer[(pageNumber * 8) + (j / 8)] = tempBits[0 + j] << 7 | tempBits[1 + j] << 6 | tempBits[2 + j] << 5 | tempBits[3 + j] << 4 | tempBits[4 + j] << 3 | tempBits[5 + j] << 2 | tempBits[6 + j] << 1 | tempBits[7 + j];
}
// Wait ~600us between pages
for (int i = 0; i < 2000; i++) {
__asm__("nop\n\t");
}
}
interrupts();
// Check sdBuffer content against file on sd card
for (int c = 0; c < 512; c++) {
if (myFile.read() != sdBuffer[c]) {
writeErrors++;
}
}
}
// Close the file:
myFile.close();
}
else {
// SD Error
writeErrors = 999999;
print_Error(F("SD Error"), true);
}
// Return 0 if verified ok, or number of errors
return writeErrors;
}
else {
print_Error(F("Savetype Error"), true);
}
}
/******************************************
SRAM functions
*****************************************/
// Write sram to cartridge
void writeSram(unsigned long sramSize) {
if (saveType == 1) {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Writing..."));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (unsigned long currByte = sramBase; currByte < (sramBase + sramSize); currByte += 512) {
// Read save from SD into buffer
myFile.read(sdBuffer, 512);
// Set the address for the next 512 bytes
setAddress_N64(currByte);
for (int c = 0; c < 512; c += 2) {
// Join bytes to word
word myWord = ( ( sdBuffer[c] & 0xFF ) << 8 ) | ( sdBuffer[c + 1] & 0xFF );
// Write word
writeWord_N64(myWord);
}
}
// Close the file:
myFile.close();
println_Msg(F("Done"));
display_Update();
}
else {
print_Error(F("SD Error"), true);
}
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Read sram and save to the SD card
void readSram(unsigned long sramSize, byte flashramType) {
int offset = 512;
int bufferSize = 512;
if (flashramType == 2) {
offset = 64;
bufferSize = 128;
}
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
if (saveType == 4) {
strcat(fileName, ".fla");
}
else if (saveType == 1) {
strcat(fileName, ".sra");
}
else {
print_Error(F("Savetype Error"), true);
}
// create a new folder for the save file
EEPROM_readAnything(0, foldern);
sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
// Set the address
setAddress_N64(currByte);
for (int c = 0; c < bufferSize; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
myFile.write(sdBuffer, bufferSize);
}
// Close the file:
myFile.close();
print_Msg(F("Saved to "));
print_Msg(folder);
println_Msg(F("/"));
display_Update();
}
unsigned long verifySram(unsigned long sramSize, byte flashramType) {
writeErrors = 0;
int offset = 512;
int bufferSize = 512;
if (flashramType == 2) {
offset = 64;
bufferSize = 128;
}
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
// Set the address
setAddress_N64(currByte);
for (int c = 0; c < bufferSize; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
// Check sdBuffer content against file on sd card
for (int i = 0; i < bufferSize; i++) {
if (myFile.read() != sdBuffer[i]) {
writeErrors++;
}
}
}
// Close the file:
myFile.close();
}
else {
print_Error(F("SD Error"), true);
}
// Return 0 if verified ok, or number of errors
return writeErrors;
}
/******************************************
Flashram functions
*****************************************/
// Send a command to the flashram command register
void sendFramCmd (unsigned long myCommand) {
// Split command into two words
word myComLowOut = myCommand & 0xFFFF;
word myComHighOut = myCommand >> 16;
// Set address to command register
setAddress_N64(0x08010000);
// Send command
writeWord_N64(myComHighOut);
writeWord_N64(myComLowOut);
}
// Init fram
void initFram() {
// FRAM_EXECUTE_CMD
sendFramCmd(0xD2000000);
delay(10);
// FRAM_EXECUTE_CMD
sendFramCmd(0xD2000000);
delay(10);
//FRAM_STATUS_MODE_CMD
sendFramCmd(0xE1000000);
delay(10);
}
void writeFram(byte flashramType) {
if (saveType == 4) {
// Erase fram
eraseFram();
// Check if empty
if (blankcheck_N64(flashramType) == 0) {
println_Msg(F("OK"));
display_Update();
}
else {
println_Msg("FAIL");
display_Update();
}
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
print_Msg(F("Writing "));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Init fram
initFram();
// Write all 8 fram banks
print_Msg(F("Bank "));
for (byte bank = 0; bank < 8; bank++) {
print_Msg(bank);
print_Msg(F(" "));
display_Update();
// Write one bank of 128*128 bytes
for (byte offset = 0; offset < 128; offset++) {
// Read save from SD into buffer
myFile.read(sdBuffer, 128);
// FRAM_WRITE_MODE_CMD
sendFramCmd(0xB4000000);
delay(1);
// Set the address for the next 128 bytes
setAddress_N64(0x08000000);
// Send 128 bytes, 64 words
for (byte c = 0; c < 128; c += 2) {
// Join two bytes into one word
word myWord = ( ( sdBuffer[c] & 0xFF ) << 8 ) | ( sdBuffer[c + 1] & 0xFF );
// Write word
writeWord_N64(myWord);
}
// Delay between each "DMA"
delay(1);
//FRAM_WRITE_OFFSET_CMD + offset
sendFramCmd((0xA5000000 | (((bank * 128) + offset) & 0xFFFF)));
delay(1);
// FRAM_EXECUTE_CMD
sendFramCmd(0xD2000000);
while (waitForFram(flashramType)) {
delay(1);
}
}
// Delay between banks
delay(20);
}
println_Msg("");
// Close the file:
myFile.close();
}
else {
print_Error(F("SD Error"), true);
}
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Delete all 8 flashram banks
void eraseFram() {
if (saveType == 4) {
print_Msg(F("Erasing..."));
display_Update();
// Init fram
initFram();
// Erase fram
// 0x4B00007F 0x4B0000FF 0x4B00017F 0x4B0001FF 0x4B00027F 0x4B0002FF 0x4B00037F 0x4B0003FF
for (unsigned long bank = 0x4B00007F; bank < 0x4B00047F; bank += 0x80) {
sendFramCmd(bank);
delay(10);
// FRAM_ERASE_MODE_CMD
sendFramCmd(0x78000000);
delay(10);
// FRAM_EXECUTE_CMD
sendFramCmd(0xD2000000);
while (waitForFram(flashramType)) {
delay(1);
}
}
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Read flashram
void readFram(byte flashramType) {
if (saveType == 4) {
// Put flashram into read mode
// FRAM_READ_MODE_CMD
sendFramCmd(0xF0000000);
// Read Flashram
readSram(131072, flashramType);
}
else {
print_Error(F("Savetype Error"), true);
}
}
// Verify flashram
unsigned long verifyFram(byte flashramType) {
// Put flashram into read mode
// FRAM_READ_MODE_CMD
sendFramCmd(0xF0000000);
writeErrors = verifySram(131072, flashramType);
return writeErrors;
}
// Blankcheck flashram
unsigned long blankcheck_N64(byte flashramType) {
writeErrors = 0;
int offset = 512;
int bufferSize = 512;
if (flashramType == 2) {
offset = 64;
bufferSize = 128;
}
// Put flashram into read mode
// FRAM_READ_MODE_CMD
sendFramCmd(0xF0000000);
// Read Flashram
for (unsigned long currByte = sramBase; currByte < (sramBase + (131072 / flashramType)); currByte += offset) {
// Set the address for the next 512 bytes
setAddress_N64(currByte);
for (int c = 0; c < bufferSize; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
// Check sdBuffer content against file on sd card
for (int i = 0; i < bufferSize; i++) {
if (0xFF != sdBuffer[i]) {
writeErrors++;
}
}
}
// Return 0 if verified ok, or number of errors
return writeErrors;
}
// Wait until current operation is done
byte waitForFram(byte flashramType) {
byte framStatus = 0;
byte statusMXL1100[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1E};
byte statusMXL1101[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1D};
byte statusMN63F81[] = {0x11, 0x11, 0x80, 0x01, 0x00, 0x32, 0x00, 0xF1};
// FRAM_STATUS_MODE_CMD
sendFramCmd(0xE1000000);
delay(1);
// Set address to Fram status register
setAddress_N64(0x08000000);
// Read Status
for (byte c = 0; c < 8; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
if (flashramType == 2) {
for (byte c = 0; c < 8; c++) {
if (statusMXL1100[c] != sdBuffer[c]) {
framStatus = 1;
}
}
}
else if (flashramType == 1) {
//MX29L1101
if (MN63F81MPN == false) {
for (byte c = 0; c < 8; c++) {
if (statusMXL1101[c] != sdBuffer[c]) {
framStatus = 1;
}
}
}
//MN63F81MPN
else if (MN63F81MPN == true) {
for (byte c = 0; c < 8; c++) {
if (statusMN63F81[c] != sdBuffer[c]) {
framStatus = 1;
}
}
}
}
return framStatus;
}
// Get flashram type
void getFramType() {
// FRAM_STATUS_MODE_CMD
sendFramCmd(0xE1000000);
delay(10);
// Set address to Fram status register
setAddress_N64(0x08000000);
// Read Status
for (byte c = 0; c < 8; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
//MX29L1100
if (sdBuffer[7] == 0x1e ) {
flashramType = 2;
println_Msg(F("Type: MX29L1100"));
display_Update();
}
//MX29L1101
else if (sdBuffer[7] == 0x1d ) {
flashramType = 1;
MN63F81MPN = false;
println_Msg(F("Type: MX29L1101"));
display_Update();
}
//MN63F81MPN
else if (sdBuffer[7] == 0xf1 ) {
flashramType = 1;
MN63F81MPN = true;
println_Msg(F("Type: MN63F81MPN"));
display_Update();
}
// 29L1100KC-15B0 compat MX29L1101
else if ((sdBuffer[7] == 0x8e ) || (sdBuffer[7] == 0x84 )) {
flashramType = 1;
MN63F81MPN = false;
println_Msg(F("Type: 29L1100KC-15B0"));
println_Msg(F("(compat. MX29L1101)"));
display_Update();
}
// Type unknown
else {
for (byte c = 0; c < 8; c++) {
print_Msg(sdBuffer[c], HEX);
print_Msg(F(", "));
}
print_Error(F("Flashram unknown"), true);
}
}
/******************************************
Rom functions
*****************************************/
// Read rom and save to the SD card
void readRom_N64() {
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
strcat(fileName, ".Z64");
redumpnewfolder:
// create a new folder
EEPROM_readAnything(0, foldern);
sprintf(folder, "N64/ROM/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
display_Clear();
print_Msg(F("Saving to "));
print_Msg(folder);
println_Msg(F("/..."));
display_Update();
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
redumpsamefolder:
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
// dumping rom slow
#ifdef slowcrc
// get current time
unsigned long startTime = millis();
for (unsigned long currByte = romBase; currByte < (romBase + (cartSize * 1024 * 1024)); currByte += 512) {
// Blink led
if (currByte % 16384 == 0)
PORTB ^= (1 << 4);
// Set the address for the next 512 bytes
setAddress_N64(currByte);
for (int c = 0; c < 512; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
myFile.write(sdBuffer, 512);
}
// Close the file:
myFile.close();
// Calculate Checksum and convert to string
println_Msg(F("Calculating CRC.."));
display_Update();
char crcStr[9];
sprintf(crcStr, "%08lx", crc64());
// Print checksum
println_Msg(crcStr);
display_Update();
// end time
unsigned long timeElapsed = (millis() - startTime) / 1000; // seconds
#else
// dumping rom fast
byte buffer[1024] = { 0 };
// get current time
unsigned long startTime = millis();
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)(cartSize) * 1024 * 1024;
draw_progressbar(0, totalProgressBar);
// prepare crc32
uint32_t oldcrc32 = 0xFFFFFFFF;
uint32_t tab_value = 0;
uint8_t idx = 0;
// run combined dumper + crc32 routine for better performance, as N64 ROMs are quite large for an 8bit micro
// currently dumps + checksums a 32MB cart in 170 seconds (down from 347 seconds)
for (unsigned long currByte = romBase; currByte < (romBase + (cartSize * 1024 * 1024)); currByte += 1024) {
// Blink led
if (currByte % 16384 == 0)
PORTB ^= (1 << 4);
// Set the address for the first 512 bytes to dump
setAddress_N64(currByte);
// Wait 62.5ns (safety)
NOP;
for (int c = 0; c < 512; c += 2) {
// Pull read(PH6) low
PORTH &= ~(1 << 6);
// Wait ~310ns
NOP; NOP; NOP; NOP; NOP;
// data on PINK and PINF is valid now, read into sd card buffer
buffer[c] = PINK; // hiByte
buffer[c + 1] = PINF; // loByte
// Pull read(PH6) high
PORTH |= (1 << 6);
// crc32 update
idx = ((oldcrc32) ^ (buffer[c]));
tab_value = pgm_read_dword(crc_32_tab + idx);
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
idx = ((oldcrc32) ^ (buffer[c + 1]));
tab_value = pgm_read_dword(crc_32_tab + idx);
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
}
// Set the address for the next 512 bytes to dump
setAddress_N64(currByte + 512);
// Wait 62.5ns (safety)
NOP;
for (int c = 512; c < 1024; c += 2) {
// Pull read(PH6) low
PORTH &= ~(1 << 6);
// Wait ~310ns
NOP; NOP; NOP; NOP; NOP;
// data on PINK and PINF is valid now, read into sd card buffer
buffer[c] = PINK; // hiByte
buffer[c + 1] = PINF; // loByte
// Pull read(PH6) high
PORTH |= (1 << 6);
// crc32 update
idx = ((oldcrc32) ^ (buffer[c])) & 0xff;
tab_value = pgm_read_dword(crc_32_tab + idx);
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
idx = ((oldcrc32) ^ (buffer[c + 1])) & 0xff;
tab_value = pgm_read_dword(crc_32_tab + idx);
oldcrc32 = tab_value ^ ((oldcrc32) >> 8);
}
processedProgressBar += 1024;
draw_progressbar(processedProgressBar, totalProgressBar);
// write out 1024 bytes to file
myFile.write(buffer, 1024);
}
// Close the file:
myFile.close();
unsigned long timeElapsed = (millis() - startTime) / 1000; // seconds
print_Msg(F("CRC: "));
display_Update();
// convert checksum to string
char crcStr[9];
sprintf(crcStr, "%08lx", ~oldcrc32);
// Print checksum
println_Msg(crcStr);
display_Update();
#endif
// Search n64.txt for crc
if (searchCRC(crcStr)) {
// Dump was a known good rom
println_Msg(F("Checksum matches"));
print_Msg(F("Done ("));
print_Msg(timeElapsed); // include elapsed time
println_Msg(F("s)"));
println_Msg(F(""));
println_Msg(F("Press Button..."));
display_Update();
// This saves a tt file with rom info next to the dumped rom
#ifdef savesummarytotxt
savesummary_N64(1, crcStr, timeElapsed);
#endif
wait();
}
else {
// Dump was bad or unknown
errorLvl = 1;
rgb.setColor(255, 0, 0);
println_Msg(F("Checksum not found"));
println_Msg(F("in N64.txt"));
println_Msg(F(""));
println_Msg(F("Press Button..."));
display_Update();
// This saves a tt file with rom info next to the dumped rom
#ifdef savesummarytotxt
savesummary_N64(0, crcStr, timeElapsed);
#endif
wait();
// N64 CRC32 error Menu
unsigned char CRCMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsN64CRC, 4);
CRCMenu = question_box(F("Redump cartridge?"), menuOptions, 4, 0);
// wait for user choice to come back from the question box menu
switch (CRCMenu)
{
case 0:
// Return to N64 menu
display_Clear();
break;
case 1:
// Dump again into new folder
display_Clear();
rgb.setColor(0, 0, 0);
goto redumpnewfolder;
break;
case 2:
// Dump again into same folder
// Change to last directory
sd.chdir(folder);
// Delete old file
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
if (!myFile.remove()) {
print_Error(F("Delete Error"), true);
}
// Dump again
display_Clear();
println_Msg(F("Reading Rom..."));
display_Update();
rgb.setColor(0, 0, 0);
goto redumpsamefolder;
break;
case 3:
// Reset
resetArduino();
break;
}
}
}
// Save an info.txt with information on the dumped rom to the SD card
void savesummary_N64(boolean checkfound, char crcStr[9], unsigned long timeElapsed) {
// Open file on sd card
if (!myFile.open("N64/ROM/n64log.txt", O_RDWR | O_CREAT | O_APPEND)) {
print_Error(F("SD Error"), true);
}
//Write the info
myFile.print(F("Name\t: "));
myFile.println(romName);
myFile.print(F("ID\t: "));
myFile.println(cartID);
myFile.print(F("ROM CRC1: "));
myFile.println(CRC1);
myFile.print(F("ROM CRC2: "));
myFile.println(CRC2);
myFile.print(F("Size\t: "));
myFile.print(cartSize);
myFile.println(F("MB"));
myFile.print(F("Save\t: "));
switch (saveType) {
case 1:
myFile.println(F("Sram"));
break;
case 4:
myFile.println(F("Flashram"));
break;
case 5:
myFile.println(F("4K Eeprom"));
break;
case 6:
myFile.println(F("16K Eeprom"));
break;
default:
myFile.println(F("unknown"));
break;
}
myFile.print(F("Version\t: 1."));
myFile.println(romVersion);
myFile.print(F("Saved To: "));
myFile.println(folder);
#ifdef RTC_installed
myFile.print(F("Dumped\t: "));
myFile.println(RTCStamp());
#endif
myFile.print(F("CRC\t: "));
myFile.print(crcStr);
if (checkfound) {
// Dump was a known good rom
// myFile.println(F("Checksum matches"));
myFile.println(" [Match]");
}
else {
// myFile.println(F("Checksum not found"));
myFile.println(" [No Match]");
}
myFile.print(F("Time\t: "));
myFile.println(timeElapsed);
myFile.println(F(" "));
// Close the file:
myFile.close();
}
/******************************************
N64 Repro Flashrom Functions
*****************************************/
void flashRepro_N64() {
unsigned long sectorSize;
byte bufferSize;
// Check flashrom ID's
idFlashrom_N64();
// If the ID is known continue
if (cartSize != 0) {
// Print flashrom name
if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2201") == 0)) {
print_Msg(F("Spansion S29GL256N"));
if (cartSize == 64)
println_Msg(F(" x2"));
else
println_Msg("");
}
else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2101") == 0)) {
print_Msg(F("Spansion S29GL128N"));
}
else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2100") == 0)) {
print_Msg(F("ST M29W128GL"));
}
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
print_Msg(F("Macronix MX29LV640"));
if (cartSize == 16)
println_Msg(F(" x2"));
else
println_Msg("");
}
else if (strcmp(flashid, "8816") == 0)
println_Msg(F("Intel 4400L0ZDQ0"));
else if (strcmp(flashid, "7E7E") == 0)
println_Msg(F("Fujitsu MSP55LV100S"));
else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "2301") == 0))
println_Msg(F("Fujitsu MSP55LV512"));
else if ((strcmp(flashid, "227E") == 0) && (strcmp(cartID, "3901") == 0))
println_Msg(F("Intel 512M29EW"));
// Print info
print_Msg(F("ID: "));
print_Msg(flashid);
print_Msg(F(" Size: "));
print_Msg(cartSize);
println_Msg(F("MB"));
println_Msg("");
println_Msg(F("This will erase your"));
println_Msg(F("Repro Cartridge."));
println_Msg(F("Attention: Use 3.3V!"));
println_Msg("");
println_Msg(F("Press Button"));
display_Update();
wait();
}
else {
println_Msg(F("Unknown flashrom"));
print_Msg(F("ID: "));
print_Msg(vendorID);
print_Msg(F(" "));
print_Msg(flashid);
print_Msg(F(" "));
println_Msg(cartID);
println_Msg(F(" "));
println_Msg(F("Press button for"));
println_Msg(F("manual config"));
println_Msg(F("This will erase your"));
println_Msg(F("Repro Cartridge."));
println_Msg(F("Attention: Use 3.3V!"));
display_Update();
wait();
// clear IDs
sprintf(vendorID, "%s", "CONF");
sprintf(flashid, "%s", "CONF");
sprintf(cartID, "%s", "CONF");
// Set cartsize manually
unsigned char N64RomMenu;
// Copy menuOptions out of progmem
convertPgm(romOptionsN64, 6);
N64RomMenu = question_box(F("Select flash size"), menuOptions, 6, 0);
// wait for user choice to come back from the question box menu
switch (N64RomMenu)
{
case 0:
// 4MB
cartSize = 4;
break;
case 1:
// 8MB
cartSize = 8;
break;
case 2:
// 12MB
cartSize = 12;
break;
case 3:
// 16MB
cartSize = 16;
break;
case 4:
// 32MB
cartSize = 32;
break;
case 5:
// 64MB
cartSize = 64;
break;
}
// Set flash buffer manually
unsigned char N64BufferMenu;
// Copy menuOptions out of progmem
convertPgm(bufferOptionsN64, 4);
N64BufferMenu = question_box(F("Select buffer size"), menuOptions, 4, 0);
// wait for user choice to come back from the question box menu
switch (N64BufferMenu)
{
case 0:
// no buffer
bufferSize = 0;
break;
case 1:
// 32 byte buffer
bufferSize = 32;
break;
case 2:
// 64 byte buffer
bufferSize = 64;
break;
case 3:
// 128 byte buffer
bufferSize = 128;
break;
}
// Set sector size manually
unsigned char N64SectorMenu;
// Copy menuOptions out of progmem
convertPgm(sectorOptionsN64, 4);
N64SectorMenu = question_box(F("Select sector size"), menuOptions, 4, 0);
// wait for user choice to come back from the question box menu
switch (N64SectorMenu)
{
case 0:
// 8KB sectors
sectorSize = 0x2000;
break;
case 1:
// 32KB sectors
sectorSize = 0x8000;
break;
case 2:
// 64KB sectors
sectorSize = 0x10000;
break;
case 3:
// 128KB sectors
sectorSize = 0x20000;
break;
}
}
// Launch file browser
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Select z64 file"));
display_Clear();
display_Update();
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
print_Msg(F("File size: "));
print_Msg(fileSize / 1048576);
println_Msg(F("MB"));
display_Update();
// Compare file size to flashrom size
if ((fileSize / 1048576) > cartSize) {
print_Error(F("File too big"), true);
}
// Erase needed sectors
if (strcmp(flashid, "227E") == 0) {
// Spansion S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
eraseSector_N64(0x20000);
}
else if (strcmp(flashid, "7E7E") == 0) {
// Fujitsu MSP55LV100S
eraseMSP55LV100_N64();
}
else if ((strcmp(flashid, "8813") == 0) || (strcmp(flashid, "8816") == 0)) {
// Intel 4400L0ZDQ0
eraseIntel4400_N64();
resetIntel4400_N64();
}
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
// Macronix MX29LV640, C9 is top boot and CB is bottom boot block
eraseSector_N64(0x8000);
}
else {
eraseFlashrom_N64();
}
// Check if erase was successful
if (blankcheckFlashrom_N64()) {
// Write flashrom
println_Msg(F("OK"));
print_Msg(F("Writing "));
println_Msg(filePath);
display_Update();
if ((strcmp(cartID, "3901") == 0) && (strcmp(flashid, "227E") == 0)) {
// Intel 512M29EW(64MB) with 0x20000 sector size and 128 byte buffer
writeFlashBuffer_N64(0x20000, 128);
}
else if ((strcmp(cartID, "2100") == 0) && (strcmp(flashid, "227E") == 0)) {
// ST M29W128GH(16MB) with 0x20000 sector size and 64 byte buffer
writeFlashBuffer_N64(0x20000, 64);
}
else if (strcmp(flashid, "227E") == 0) {
// Spansion S29GL128N/S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
writeFlashBuffer_N64(0x20000, 32);
}
else if (strcmp(flashid, "7E7E") == 0) {
//Fujitsu MSP55LV100S
writeMSP55LV100_N64(0x20000);
}
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
// Macronix MX29LV640 without buffer and 0x8000 sector size
writeFlashrom_N64(0x8000);
}
else if ((strcmp(flashid, "8813") == 0) || (strcmp(flashid, "8816") == 0)) {
// Intel 4400L0ZDQ0
writeIntel4400_N64();
resetIntel4400_N64();
}
else if (bufferSize == 0) {
writeFlashrom_N64(sectorSize);
}
else {
writeFlashBuffer_N64(sectorSize, bufferSize);
}
// Close the file:
myFile.close();
// Verify
print_Msg(F("Verifying..."));
display_Update();
writeErrors = verifyFlashrom_N64();
if (writeErrors == 0) {
println_Msg(F("OK"));
display_Update();
}
else {
print_Msg(writeErrors);
print_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
}
else {
// Close the file
myFile.close();
print_Error(F("failed"), false);
}
}
else {
print_Error(F("Can't open file"), false);
}
println_Msg(F("Press Button..."));
display_Update();
wait();
display_Clear();
display_Update();
}
// Reset to read mode
void resetIntel4400_N64() {
for (unsigned long currPartition = 0; currPartition < (cartSize * 0x100000); currPartition += 0x20000) {
setAddress_N64(romBase + currPartition);
writeWord_N64(0xFF);
}
}
// Reset Fujitsu MSP55LV100S
void resetMSP55LV100_N64(unsigned long flashBase) {
// Send reset Command
setAddress_N64(flashBase);
writeWord_N64(0xF0F0);
delay(100);
}
// Common reset command
void resetFlashrom_N64(unsigned long flashBase) {
// Send reset Command
setAddress_N64(flashBase);
writeWord_N64(0xF0);
delay(100);
}
void idFlashrom_N64() {
// Set size to 0 if no ID is found
cartSize = 0;
// Send flashrom ID command
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(romBase + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0x90);
// Read 1 byte vendor ID
setAddress_N64(romBase);
sprintf(vendorID, "%02X", readWord_N64());
// Read 2 bytes flashrom ID
sprintf(flashid, "%04X", readWord_N64());
// Read 2 bytes secondary flashrom ID
setAddress_N64(romBase + 0x1C);
sprintf(cartID, "%04X", ((readWord_N64() << 8) | (readWord_N64() & 0xFF)));
// Spansion S29GL256N(32MB/64MB) with either one or two flashrom chips
if ((strcmp(cartID, "2201") == 0) && (strcmp(flashid, "227E") == 0)) {
cartSize = 32;
// Reset flashrom
resetFlashrom_N64(romBase);
// Test for second flashrom chip at 0x2000000 (32MB)
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
writeWord_N64(0x90);
char tempID[5];
setAddress_N64(romBase + 0x2000000);
// Read manufacturer ID
readWord_N64();
// Read flashrom ID
sprintf(tempID, "%04X", readWord_N64());
// Check if second flashrom chip is present
if (strcmp(tempID, "227E") == 0) {
cartSize = 64;
}
resetFlashrom_N64(romBase + 0x2000000);
}
// Macronix MX29LV640(8MB/16MB) with either one or two flashrom chips
else if ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0)) {
cartSize = 8;
resetFlashrom_N64(romBase + 0x800000);
// Test for second flashrom chip at 0x800000 (8MB)
setAddress_N64(romBase + 0x800000 + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(romBase + 0x800000 + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(romBase + 0x800000 + (0x555 << 1));
writeWord_N64(0x90);
char tempID[5];
setAddress_N64(romBase + 0x800000);
// Read manufacturer ID
readWord_N64();
// Read flashrom ID
sprintf(tempID, "%04X", readWord_N64());
// Check if second flashrom chip is present
if ((strcmp(tempID, "22C9") == 0) || (strcmp(tempID, "22CB") == 0)) {
cartSize = 16;
}
resetFlashrom_N64(romBase + 0x800000);
}
// Intel 4400L0ZDQ0 (64MB)
else if (strcmp(flashid, "8816") == 0) {
// Found first flashrom chip, set to 32MB
cartSize = 32;
resetIntel4400_N64();
// Test if second half of the flashrom might be hidden
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
writeWord_N64(0x90);
// Read manufacturer ID
setAddress_N64(romBase + 0x2000000);
readWord_N64();
// Read flashrom ID
sprintf(cartID, "%04X", readWord_N64());
if (strcmp(cartID, "8813") == 0) {
cartSize = 64;
strncpy(flashid , cartID, 5);
}
resetIntel4400_N64();
// Empty cartID string
cartID[0] = '\0';
}
//Fujitsu MSP55LV512/Spansion S29GL512N (64MB)
else if ((strcmp(cartID, "2301") == 0) && (strcmp(flashid, "227E") == 0)) {
cartSize = 64;
// Reset flashrom
resetFlashrom_N64(romBase);
}
// Spansion S29GL128N(16MB) with one flashrom chip
else if ((strcmp(cartID, "2101") == 0) && (strcmp(flashid, "227E") == 0)) {
cartSize = 16;
// Reset flashrom
resetFlashrom_N64(romBase);
}
// ST M29W128GL(16MB) with one flashrom chip
else if ((strcmp(cartID, "2100") == 0) && (strcmp(flashid, "227E") == 0)) {
cartSize = 16;
// Reset flashrom
resetFlashrom_N64(romBase);
}
// Intel 512M29EW(64MB) with one flashrom chip
else if ((strcmp(cartID, "3901") == 0) && (strcmp(flashid, "227E") == 0)) {
cartSize = 64;
// Reset flashrom
resetFlashrom_N64(romBase);
}
// Unknown 227E type
else if (strcmp(flashid, "227E") == 0) {
cartSize = 0;
// Reset flashrom
resetFlashrom_N64(romBase);
}
//Test for Fujitsu MSP55LV100S (64MB)
else {
// Send flashrom ID command
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0xAAAA);
setAddress_N64(romBase + (0x2AA << 1));
writeWord_N64(0x5555);
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0x9090);
setAddress_N64(romBase);
// Read 1 byte vendor ID
readWord_N64();
// Read 2 bytes flashrom ID
sprintf(cartID, "%04X", readWord_N64());
if (strcmp(cartID, "7E7E") == 0) {
resetMSP55LV100_N64(romBase);
cartSize = 64;
strncpy(flashid , cartID, 5);
}
}
if ((strcmp(flashid, "1240") == 0) && (strcmp(cartID, "1240") == 0)) {
print_Error(F("Please reseat cartridge"), true);
}
}
// Erase Intel flashrom
void eraseIntel4400_N64() {
unsigned long flashBase = romBase;
print_Msg(F("Erasing..."));
display_Update();
// If the game is smaller than 32Mbit only erase the needed blocks
unsigned long lastBlock = 0x1FFFFFF;
if (fileSize < 0x1FFFFFF)
lastBlock = fileSize;
// Erase 4 blocks with 16kwords each
for (unsigned long currBlock = 0x0; currBlock < 0x1FFFF; currBlock += 0x8000) {
// Unlock block command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x60);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Erase command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x20);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Read the status register
setAddress_N64(flashBase + currBlock);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(flashBase + currBlock);
statusReg = readWord_N64();
}
}
// Erase up to 255 blocks with 64kwords each
for (unsigned long currBlock = 0x20000; currBlock < lastBlock; currBlock += 0x1FFFF) {
// Unlock block command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x60);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Erase command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x20);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Read the status register
setAddress_N64(flashBase + currBlock);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(flashBase + currBlock);
statusReg = readWord_N64();
}
// Blink led
PORTB ^= (1 << 4);
}
// Check if we should erase the second chip too
if ((cartSize = 64) && (fileSize > 0x2000000)) {
// Switch base address to second chip
flashBase = romBase + 0x2000000;
// 255 blocks with 64kwords each
for (unsigned long currBlock = 0x0; currBlock < 0x1FDFFFF; currBlock += 0x1FFFF) {
// Unlock block command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x60);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Erase command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x20);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Read the status register
setAddress_N64(flashBase + currBlock);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(flashBase + currBlock);
statusReg = readWord_N64();
}
// Blink led
PORTB ^= (1 << 4);
}
// 4 blocks with 16kword each
for (unsigned long currBlock = 0x1FE0000; currBlock < 0x1FFFFFF; currBlock += 0x8000) {
// Unlock block command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x60);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Erase command
setAddress_N64(flashBase + currBlock);
writeWord_N64(0x20);
setAddress_N64(flashBase + currBlock);
writeWord_N64(0xD0);
// Read the status register
setAddress_N64(flashBase + currBlock);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(flashBase + currBlock);
statusReg = readWord_N64();
}
}
}
}
// Erase Fujutsu MSP55LV100S
void eraseMSP55LV100_N64() {
unsigned long flashBase = romBase;
unsigned long sectorSize = 0x20000;
print_Msg(F("Erasing..."));
display_Update();
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
// Blink led
PORTB ^= (1 << 4);
// Send Erase Command to first chip
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xAAAA);
setAddress_N64(flashBase + (0x2AA << 1));
writeWord_N64(0x5555);
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0x8080);
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xAAAA);
setAddress_N64(flashBase + (0x2AA << 1));
writeWord_N64(0x5555);
setAddress_N64(romBase + currSector);
writeWord_N64(0x3030);
// Read the status register
setAddress_N64(romBase + currSector);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(romBase + currSector);
statusReg = readWord_N64();
}
// Read the status register
setAddress_N64(romBase + currSector);
statusReg = readWord_N64();
while ((statusReg | 0x7FFF) != 0xFFFF) {
setAddress_N64(romBase + currSector);
statusReg = readWord_N64();
}
}
}
// Common chip erase command
void eraseFlashrom_N64() {
print_Msg(F("Chip erase..."));
display_Update();
// Send Erase Command
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(romBase + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0x80);
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(romBase + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(romBase + (0x555 << 1));
writeWord_N64(0x10);
// Read the status register
setAddress_N64(romBase);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(romBase);
statusReg = readWord_N64();
// Blink led
PORTB ^= (1 << 4);
delay(500);
}
}
// Common sector erase command
void eraseSector_N64(unsigned long sectorSize) {
unsigned long flashBase = romBase;
print_Msg(F("Sector erase..."));
display_Update();
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
// Blink led
PORTB ^= (1 << 4);
// Spansion S29GL256N(32MB/64MB) with two flashrom chips
if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0) && (strcmp(flashid, "227E") == 0)) {
// Change to second chip
flashBase = romBase + 0x2000000;
}
// Macronix MX29LV640(8MB/16MB) with two flashrom chips
else if ((currSector == 0x800000) && ((strcmp(flashid, "22C9") == 0) || (strcmp(flashid, "22CB") == 0))) {
flashBase = romBase + 0x800000;
}
// Send Erase Command
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(flashBase + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0x80);
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(flashBase + (0x2AA << 1));
writeWord_N64(0x55);
setAddress_N64(romBase + currSector);
writeWord_N64(0x30);
// Read the status register
setAddress_N64(romBase + currSector);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(romBase + currSector);
statusReg = readWord_N64();
}
}
}
boolean blankcheckFlashrom_N64() {
for (unsigned long currByte = romBase; currByte < romBase + fileSize; currByte += 512) {
// Blink led
if (currByte % 131072 == 0)
PORTB ^= (1 << 4);
// Set the address
setAddress_N64(currByte);
for (int c = 0; c < 512; c += 2) {
if (readWord_N64() != 0xFFFF) {
return 0;
}
}
}
return 1;
}
// Write Intel flashrom
void writeIntel4400_N64() {
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
// Blink led
PORTB ^= (1 << 4);
// Write to flashrom
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
// Write 32 words at a time
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 64) {
// Buffered program command
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
writeWord_N64(0xE8);
// Check Status register
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
statusReg = readWord_N64();
}
// Write word count (minus 1)
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
writeWord_N64(0x1F);
// Write buffer
for (byte currByte = 0; currByte < 64; currByte += 2) {
// Join two bytes into one word
word currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
writeWord_N64(currWord);
}
// Write Buffer to Flash
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
writeWord_N64(0xD0);
// Read the status register at last written address
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != 0xFFFF) {
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
statusReg = readWord_N64();
}
}
}
}
}
// Write Fujitsu MSP55LV100S flashrom consisting out of two MSP55LV512 flashroms one used for the high byte the other for the low byte
void writeMSP55LV100_N64(unsigned long sectorSize) {
unsigned long flashBase = romBase;
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
// Blink led
PORTB ^= (1 << 4);
// Write to flashrom
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
// Write 32 bytes at a time
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 32) {
// 2 unlock commands
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xAAAA);
setAddress_N64(flashBase + (0x2AA << 1));
writeWord_N64(0x5555);
// Write buffer load command at sector address
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
writeWord_N64(0x2525);
// Write word count (minus 1) at sector address
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
writeWord_N64(0x0F0F);
// Define variable before loop so we can use it later when reading the status register
word currWord;
for (byte currByte = 0; currByte < 32; currByte += 2) {
// Join two bytes into one word
currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );
// Load Buffer Words
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
writeWord_N64(currWord);
}
// Write Buffer to Flash
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
writeWord_N64(0x2929);
// Read the status register at last written address
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
word statusReg = readWord_N64();
while ((statusReg | 0x7F7F) != (currWord | 0x7F7F)) {
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
statusReg = readWord_N64();
}
}
}
}
}
// Write Spansion S29GL256N flashrom using the 32 byte write buffer
void writeFlashBuffer_N64(unsigned long sectorSize, byte bufferSize) {
unsigned long flashBase = romBase;
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
// Blink led
PORTB ^= (1 << 4);
// Spansion S29GL256N(32MB/64MB) with two flashrom chips
if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0)) {
flashBase = romBase + 0x2000000;
}
// Write to flashrom
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
// Write 32 bytes at a time
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += bufferSize) {
// 2 unlock commands
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(flashBase + (0x2AA << 1));
writeWord_N64(0x55);
// Write buffer load command at sector address
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
writeWord_N64(0x25);
// Write word count (minus 1) at sector address
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
writeWord_N64((bufferSize / 2) - 1);
// Define variable before loop so we can use it later when reading the status register
word currWord;
for (byte currByte = 0; currByte < bufferSize; currByte += 2) {
// Join two bytes into one word
currWord = ( ( sdBuffer[currWriteBuffer + currByte] & 0xFF ) << 8 ) | ( sdBuffer[currWriteBuffer + currByte + 1] & 0xFF );
// Load Buffer Words
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
writeWord_N64(currWord);
}
// Write Buffer to Flash
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
writeWord_N64(0x29);
// Read the status register at last written address
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
statusReg = readWord_N64();
}
}
}
}
}
// Write MX29LV640 flashrom without write buffer
void writeFlashrom_N64(unsigned long sectorSize) {
unsigned long flashBase = romBase;
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
// Blink led
PORTB ^= (1 << 4);
// Macronix MX29LV640(8MB/16MB) with two flashrom chips
if (currSector == 0x800000) {
flashBase = romBase + 0x800000;
}
// Write to flashrom
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
for (int currByte = 0; currByte < 512; currByte += 2) {
// Join two bytes into one word
word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
// 2 unlock commands
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xAA);
setAddress_N64(flashBase + (0x2AA << 1));
writeWord_N64(0x55);
// Program command
setAddress_N64(flashBase + (0x555 << 1));
writeWord_N64(0xA0);
// Write word
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
writeWord_N64(currWord);
// Read the status register
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
word statusReg = readWord_N64();
while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
statusReg = readWord_N64();
}
}
}
}
}
unsigned long verifyFlashrom_N64() {
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
writeErrors = 0;
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
// Blink led
PORTB ^= (1 << 4);
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
for (int currByte = 0; currByte < 512; currByte += 2) {
// Join two bytes into one word
word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
// Read flash
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
// Compare both
if (readWord_N64() != currWord) {
writeErrors++;
// Abord if too many errors
if (writeErrors > 20) {
print_Msg(F("More than "));
// Close the file:
myFile.close();
return writeErrors;
}
}
}
}
}
// Close the file:
myFile.close();
return writeErrors;
}
else {
println_Msg(F("Can't open file"));
display_Update();
return 9999;
}
}
/******************************************
N64 Gameshark Flash Functions
*****************************************/
void flashGameshark_N64() {
// Check flashrom ID's
idGameshark_N64();
// Check for SST 29LE010
if (strcmp(flashid, "0808") == 0) {
backupGameshark_N64();
println_Msg("");
println_Msg(F("This will erase your"));
println_Msg(F("Gameshark cartridge"));
println_Msg(F("Attention: Use 3.3V!"));
println_Msg("");
println_Msg(F("Press Button"));
display_Update();
wait();
// Launch file browser
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Select z64 file"));
display_Clear();
display_Update();
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
print_Msg(F("File size: "));
print_Msg(fileSize / 1024);
println_Msg(F("KB"));
display_Update();
// Compare file size to flashrom size
if (fileSize > 262144) {
print_Error(F("File too big"), true);
}
// SST 29LE010, chip erase not needed as this eeprom automaticly erases during the write cycle
eraseGameshark_N64();
// Write flashrom
print_Msg(F("Writing "));
println_Msg(filePath);
display_Update();
writeGameshark_N64();
// Close the file:
myFile.close();
// Verify
print_Msg(F("Verifying..."));
display_Update();
writeErrors = verifyGameshark_N64();
if (writeErrors == 0) {
println_Msg(F("OK"));
display_Update();
}
else {
print_Msg(writeErrors);
print_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
}
else {
print_Error(F("Can't open file"), false);
}
}
// If the ID is unknown show error message
else {
print_Msg(F("ID: "));
println_Msg(flashid);
print_Error(F("Unknown flashrom"), false);
}
println_Msg(F("Press Button..."));
display_Update();
wait();
display_Clear();
display_Update();
}
//Test for SST 29LE010
void idGameshark_N64() {
//Send flashrom ID command
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0xAAAA);
setAddress_N64(romBase + 0x5554);
writeWord_N64(0x5555);
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0x9090);
setAddress_N64(romBase);
// Read 1 byte vendor ID
readWord_N64();
// Read 2 bytes flashrom ID
sprintf(flashid, "%04X", readWord_N64());
// Reset flashrom
resetGameshark_N64();
}
//Reset ST29LE010
void resetGameshark_N64() {
// Send reset Command
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0xAAAA);
setAddress_N64(romBase + 0x5554);
writeWord_N64(0x5555);
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0xF0F0);
delay(100);
}
// Read rom and save to the SD card
void backupGameshark_N64() {
// create a new folder
EEPROM_readAnything(0, foldern);
sprintf(fileName, "GS%d", foldern);
strcat(fileName, ".z64");
sd.mkdir("N64/ROM/Gameshark", true);
sd.chdir("N64/ROM/Gameshark");
display_Clear();
print_Msg(F("Saving "));
print_Msg(fileName);
println_Msg(F("..."));
display_Update();
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
for (unsigned long currByte = romBase + 0xC00000; currByte < (romBase + 0xC00000 + 262144); currByte += 512) {
// Blink led
if (currByte % 16384 == 0)
PORTB ^= (1 << 4);
// Set the address for the next 512 bytes
setAddress_N64(currByte);
for (int c = 0; c < 512; c += 2) {
// split word
word myWord = readWord_N64();
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
myFile.write(sdBuffer, 512);
}
// Close the file:
myFile.close();
}
// Send chip erase to the two SST29LE010 inside the Gameshark
void eraseGameshark_N64() {
println_Msg(F("Erasing..."));
display_Update();
//Sending erase command according to datasheet
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0xAAAA);
setAddress_N64(romBase + 0x5554);
writeWord_N64(0x5555);
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0x8080);
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0xAAAA);
setAddress_N64(romBase + 0x5554);
writeWord_N64(0x5555);
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0x1010);
delay(20);
}
// Write Gameshark with 2x SST29LE010 Eeproms
void writeGameshark_N64() {
// Each 29LE010 has 1024 pages, each 128 bytes in size
for (unsigned long currPage = 0; currPage < fileSize / 2; currPage += 128) {
// Fill SD buffer with twice the amount since we flash 2 chips
myFile.read(sdBuffer, 256);
// Blink led
PORTB ^= (1 << 4);
//Send page write command to both flashroms
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0xAAAA);
setAddress_N64(romBase + 0x5554);
writeWord_N64(0x5555);
setAddress_N64(romBase + 0xAAAA);
writeWord_N64(0xA0A0);
// Write 1 page each, one flashrom gets the low byte, the other the high byte.
for (unsigned long currByte = 0; currByte < 256; currByte += 2) {
// Set address
setAddress_N64(romBase + 0xC00000 + (currPage * 2) + currByte);
// Join two bytes into one word
word currWord = ((sdBuffer[currByte] & 0xFF) << 8) | (sdBuffer[currByte + 1] & 0xFF);
// Send byte data
writeWord_N64(currWord);
}
delay(30);
}
}
unsigned long verifyGameshark_N64() {
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
writeErrors = 0;
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
// Blink led
PORTB ^= (1 << 4);
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
// Fill SD buffer
myFile.read(sdBuffer, 512);
for (int currByte = 0; currByte < 512; currByte += 2) {
// Join two bytes into one word
word currWord = ( ( sdBuffer[currByte] & 0xFF ) << 8 ) | ( sdBuffer[currByte + 1] & 0xFF );
// Read flash
setAddress_N64(romBase + 0xC00000 + currSector + currSdBuffer + currByte);
// Compare both
if (readWord_N64() != currWord) {
if ( (strcmp(flashid, "0808") == 0) && (currSector + currSdBuffer + currByte > 0x3F) && (currSector + currSdBuffer + currByte < 0x1080)) {
// Gameshark maps this area to the bootcode of the plugged in cartridge
}
else {
writeErrors++;
}
}
}
}
}
// Close the file:
myFile.close();
return writeErrors;
}
else {
println_Msg(F("Can't open file"));
display_Update();
return 9999;
}
}
#endif
//******************************************
// End of File
//******************************************
Reference in New Issue View Git Blame Copy Permalink