mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-27 23:14:14 +01:00
2cf7f5dbe7
The `setVoltage()` function should be called even when `ENABLE_VSELECT` is disabled because `ENABLE_3V3FIX` also uses it. There is no resource cost to do this as when both options are disabled the compiler will optimize this function out. This just "future proofs" the code so if that function ever does more it doesn't need updated everywhere. This applies to `setup_FlashVoltage()` as well. The changes to OSCR.cpp are just for code formatting and additional comments to clarify this.
4311 lines
124 KiB
C++
4311 lines
124 KiB
C++
//******************************************
|
||
// NINTENDO 64 MODULE
|
||
//******************************************
|
||
#ifdef enable_N64
|
||
|
||
/******************************************
|
||
Defines
|
||
*****************************************/
|
||
// These two macros toggle the eepDataPin/ControllerDataPin between input and output
|
||
// External 1K pull-up resistor from eepDataPin to VCC required
|
||
// 0x10 = 00010000 -> Port H Pin 4
|
||
#define N64_HIGH DDRH &= ~0x10
|
||
#define N64_LOW DDRH |= 0x10
|
||
// Read the current state(0/1) of the eepDataPin
|
||
#define N64_QUERY (PINH & 0x10)
|
||
|
||
/******************************************
|
||
Variables
|
||
*****************************************/
|
||
// Received N64 Eeprom data bits, 1 page
|
||
int eepPages;
|
||
|
||
// N64 Controller
|
||
struct {
|
||
char stick_x;
|
||
char stick_y;
|
||
} N64_status;
|
||
//stings that hold the buttons
|
||
String button = "N/A";
|
||
String lastbutton = "N/A";
|
||
|
||
// Rom base address
|
||
unsigned long romBase = 0x10000000;
|
||
|
||
// Flashram type
|
||
byte flashramType = 1;
|
||
boolean MN63F81MPN = false;
|
||
|
||
//ControllerTest
|
||
bool quit = 1;
|
||
|
||
#ifdef savesummarytotxt
|
||
String CRC1 = "";
|
||
String CRC2 = "";
|
||
#endif
|
||
|
||
static const char N64_EEP_FILENAME_FMT[] PROGMEM = "%s.eep";
|
||
static const char N64_SAVE_DIRNAME_FMT[] PROGMEM = "N64/SAVE/%s/%d";
|
||
|
||
/******************************************
|
||
Menu
|
||
*****************************************/
|
||
// N64 start menu
|
||
static const char n64MenuItem1[] PROGMEM = "Game Cartridge";
|
||
static const char n64MenuItem2[] PROGMEM = "Controller";
|
||
static const char n64MenuItem3[] PROGMEM = "Flash Repro";
|
||
static const char n64MenuItem4[] PROGMEM = "Flash Gameshark";
|
||
//static const char n64MenuItem5[] PROGMEM = "Reset"; (stored in common strings array)
|
||
static const char* const menuOptionsN64[] PROGMEM = { n64MenuItem1, n64MenuItem2, n64MenuItem3, n64MenuItem4, string_reset2 };
|
||
|
||
// N64 controller menu items
|
||
static const char N64ContMenuItem1[] PROGMEM = "Test Controller";
|
||
static const char N64ContMenuItem2[] PROGMEM = "Read ControllerPak";
|
||
static const char N64ContMenuItem3[] PROGMEM = "Write ControllerPak";
|
||
//static const char N64ContMenuItem4[] PROGMEM = "Reset"; (stored in common strings array)
|
||
static const char* const menuOptionsN64Controller[] PROGMEM = { N64ContMenuItem1, N64ContMenuItem2, N64ContMenuItem3, string_reset2 };
|
||
|
||
// N64 cart menu items
|
||
static const char N64CartMenuItem1[] PROGMEM = "Read ROM";
|
||
static const char N64CartMenuItem2[] PROGMEM = "Read Save";
|
||
static const char N64CartMenuItem3[] PROGMEM = "Write Save";
|
||
static const char N64CartMenuItem4[] PROGMEM = "Force Savetype";
|
||
//static const char N64CartMenuItem5[] PROGMEM = "Reset"; (stored in common strings array)
|
||
static const char* const menuOptionsN64Cart[] PROGMEM = { N64CartMenuItem1, N64CartMenuItem2, N64CartMenuItem3, N64CartMenuItem4, string_reset2 };
|
||
|
||
// N64 CRC32 error menu items
|
||
static const char N64CRCMenuItem1[] PROGMEM = "No";
|
||
static const char N64CRCMenuItem2[] PROGMEM = "Yes and keep old";
|
||
static const char N64CRCMenuItem3[] PROGMEM = "Yes and delete old";
|
||
//static const char N64CRCMenuItem4[] PROGMEM = "Reset"; (stored in common strings array)
|
||
static const char* const menuOptionsN64CRC[] PROGMEM = { N64CRCMenuItem1, N64CRCMenuItem2, N64CRCMenuItem3, string_reset2 };
|
||
|
||
// Rom menu
|
||
static const char N64RomItem1[] PROGMEM = "4 MB";
|
||
static const char N64RomItem2[] PROGMEM = "8 MB";
|
||
static const char N64RomItem3[] PROGMEM = "12 MB";
|
||
static const char N64RomItem4[] PROGMEM = "16 MB";
|
||
static const char N64RomItem5[] PROGMEM = "32 MB";
|
||
static const char N64RomItem6[] PROGMEM = "64 MB";
|
||
static const char N64RomItem7[] PROGMEM = "128 MB";
|
||
static const char* const romOptionsN64[] PROGMEM = { N64RomItem1, N64RomItem2, N64RomItem3, N64RomItem4, N64RomItem5, N64RomItem6, N64RomItem7 };
|
||
|
||
// Save menu
|
||
static const char N64SaveItem1[] PROGMEM = "None";
|
||
static const char N64SaveItem2[] PROGMEM = "4K EEPROM";
|
||
static const char N64SaveItem3[] PROGMEM = "16K EEPROM";
|
||
static const char N64SaveItem4[] PROGMEM = "SRAM";
|
||
static const char N64SaveItem5[] PROGMEM = "FLASH";
|
||
static const char* const saveOptionsN64[] PROGMEM = { N64SaveItem1, N64SaveItem2, N64SaveItem3, N64SaveItem4, N64SaveItem5 };
|
||
|
||
// Repro write buffer menu
|
||
static const char N64BufferItem1[] PROGMEM = "No buffer";
|
||
static const char N64BufferItem2[] PROGMEM = "32 Byte";
|
||
static const char N64BufferItem3[] PROGMEM = "64 Byte";
|
||
static const char N64BufferItem4[] PROGMEM = "128 Byte";
|
||
static const char* const bufferOptionsN64[] PROGMEM = { N64BufferItem1, N64BufferItem2, N64BufferItem3, N64BufferItem4 };
|
||
|
||
// Repro sector size menu
|
||
static const char N64SectorItem1[] PROGMEM = "8 KB";
|
||
static const char N64SectorItem2[] PROGMEM = "32 KB";
|
||
static const char N64SectorItem3[] PROGMEM = "64 KB";
|
||
static const char N64SectorItem4[] PROGMEM = "128 KB";
|
||
static const char* const sectorOptionsN64[] PROGMEM = { N64SectorItem1, N64SectorItem2, N64SectorItem3, N64SectorItem4 };
|
||
|
||
// N64 start menu
|
||
void n64Menu() {
|
||
// create menu with title and 5 options to choose from
|
||
unsigned char n64Dev;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(menuOptionsN64, 5);
|
||
n64Dev = question_box(F("Select N64 device"), menuOptions, 5, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (n64Dev) {
|
||
case 0:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Cart();
|
||
printCartInfo_N64();
|
||
mode = mode_N64_Cart;
|
||
break;
|
||
|
||
case 1:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Controller();
|
||
mode = mode_N64_Controller;
|
||
break;
|
||
|
||
case 2:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Cart();
|
||
flashRepro_N64();
|
||
printCartInfo_N64();
|
||
mode = mode_N64_Cart;
|
||
break;
|
||
|
||
case 3:
|
||
display_Clear();
|
||
display_Update();
|
||
setup_N64_Cart();
|
||
flashGameshark_N64();
|
||
printCartInfo_N64();
|
||
mode = mode_N64_Cart;
|
||
break;
|
||
|
||
case 4:
|
||
resetArduino();
|
||
break;
|
||
}
|
||
}
|
||
|
||
// N64 Controller Menu
|
||
void n64ControllerMenu() {
|
||
// create menu with title and 4 options to choose from
|
||
unsigned char mainMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(menuOptionsN64Controller, 4);
|
||
mainMenu = question_box(F("N64 Controller"), menuOptions, 4, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (mainMenu) {
|
||
case 0:
|
||
resetController();
|
||
display_Clear();
|
||
display_Update();
|
||
#if (defined(enable_OLED) || defined(enable_LCD))
|
||
controllerTest_Display();
|
||
#elif defined(enable_serial)
|
||
controllerTest_Serial();
|
||
#endif
|
||
quit = 1;
|
||
break;
|
||
|
||
case 1:
|
||
resetController();
|
||
checkController();
|
||
display_Clear();
|
||
display_Update();
|
||
readMPK();
|
||
verifyCRC();
|
||
validateMPK();
|
||
println_Msg(F(""));
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 2:
|
||
resetController();
|
||
checkController();
|
||
display_Clear();
|
||
display_Update();
|
||
// Change to root
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
// Launch file browser
|
||
fileBrowser(F("Select mpk file"));
|
||
display_Clear();
|
||
display_Update();
|
||
writeMPK();
|
||
delay(500);
|
||
verifyMPK();
|
||
println_Msg(F(""));
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 3:
|
||
resetArduino();
|
||
break;
|
||
}
|
||
}
|
||
|
||
// N64 Cartridge Menu
|
||
void n64CartMenu() {
|
||
// create menu with title and 4 options to choose from
|
||
unsigned char mainMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(menuOptionsN64Cart, 5);
|
||
mainMenu = question_box(F("N64 Cart Reader"), menuOptions, 5, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (mainMenu) {
|
||
case 0:
|
||
display_Clear();
|
||
sd.chdir("/");
|
||
#ifndef fastcrc
|
||
// Dumping ROM slow
|
||
readRom_N64();
|
||
sd.chdir("/");
|
||
compareCRC("n64.txt", 0, 1, 0);
|
||
#else
|
||
// Dumping ROM fast
|
||
compareCRC("n64.txt", readRom_N64(), 1, 0);
|
||
#endif
|
||
|
||
#ifdef global_log
|
||
save_log();
|
||
#endif
|
||
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 1:
|
||
sd.chdir("/");
|
||
display_Clear();
|
||
|
||
if (saveType == 1) {
|
||
println_Msg(F("Reading SRAM..."));
|
||
display_Update();
|
||
readSram(32768, 1);
|
||
} else if (saveType == 4) {
|
||
getFramType();
|
||
println_Msg(F("Reading FLASH..."));
|
||
display_Update();
|
||
readFram(flashramType);
|
||
} else if ((saveType == 5) || (saveType == 6)) {
|
||
println_Msg(F("Reading EEPROM..."));
|
||
display_Update();
|
||
readEeprom();
|
||
} else {
|
||
print_Error(F("Savetype Error"));
|
||
}
|
||
println_Msg(F(""));
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 2:
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
if (saveType == 1) {
|
||
// Launch file browser
|
||
fileBrowser(F("Select sra file"));
|
||
display_Clear();
|
||
|
||
writeSram(32768);
|
||
writeErrors = verifySram(32768, 1);
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("SRAM verified OK"));
|
||
display_Update();
|
||
} else {
|
||
print_STR(error_STR, 0);
|
||
print_Msg(writeErrors);
|
||
print_STR(_bytes_STR, 1);
|
||
print_Error(did_not_verify_STR);
|
||
}
|
||
} else if (saveType == 4) {
|
||
// Launch file browser
|
||
fileBrowser(F("Select fla file"));
|
||
display_Clear();
|
||
getFramType();
|
||
writeFram(flashramType);
|
||
print_STR(verifying_STR, 0);
|
||
display_Update();
|
||
writeErrors = verifyFram(flashramType);
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
} else {
|
||
println_Msg("");
|
||
print_STR(error_STR, 0);
|
||
print_Msg(writeErrors);
|
||
print_STR(_bytes_STR, 1);
|
||
print_Error(did_not_verify_STR);
|
||
}
|
||
} else if ((saveType == 5) || (saveType == 6)) {
|
||
// Launch file browser
|
||
fileBrowser(F("Select eep file"));
|
||
display_Clear();
|
||
|
||
writeEeprom();
|
||
writeErrors = verifyEeprom();
|
||
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("EEPROM verified OK"));
|
||
display_Update();
|
||
} else {
|
||
print_STR(error_STR, 0);
|
||
print_Msg(writeErrors);
|
||
print_STR(_bytes_STR, 1);
|
||
print_Error(did_not_verify_STR);
|
||
}
|
||
} else {
|
||
display_Clear();
|
||
print_Error(F("Save Type Error"));
|
||
}
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
break;
|
||
|
||
case 3:
|
||
// create submenu with title and 6 options to choose from
|
||
unsigned char N64SaveMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(saveOptionsN64, 5);
|
||
N64SaveMenu = question_box(F("Select save type"), menuOptions, 5, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (N64SaveMenu) {
|
||
case 0:
|
||
// None
|
||
saveType = 0;
|
||
break;
|
||
|
||
case 1:
|
||
// 4K EEPROM
|
||
saveType = 5;
|
||
eepPages = 64;
|
||
break;
|
||
|
||
case 2:
|
||
// 16K EEPROM
|
||
saveType = 6;
|
||
eepPages = 256;
|
||
break;
|
||
|
||
case 3:
|
||
// SRAM
|
||
saveType = 1;
|
||
break;
|
||
|
||
case 4:
|
||
// FLASHRAM
|
||
saveType = 4;
|
||
break;
|
||
}
|
||
break;
|
||
|
||
case 4:
|
||
resetArduino();
|
||
break;
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
Setup
|
||
*****************************************/
|
||
void setup_N64_Controller() {
|
||
// Request 3.3V
|
||
setVoltage(VOLTS_SET_3V3);
|
||
|
||
// Output a low signal
|
||
PORTH &= ~(1 << 4);
|
||
// Set Controller Data Pin(PH4) to Input
|
||
DDRH &= ~(1 << 4);
|
||
}
|
||
|
||
void setup_N64_Cart() {
|
||
// Request 3.3V
|
||
setVoltage(VOLTS_SET_3V3);
|
||
|
||
// Set Address Pins to Output and set them low
|
||
//A0-A7
|
||
DDRF = 0xFF;
|
||
PORTF = 0x00;
|
||
//A8-A15
|
||
DDRK = 0xFF;
|
||
PORTK = 0x00;
|
||
|
||
// Set Control Pins to Output RESET(PH0) WR(PH5) RD(PH6) aleL(PC0) aleH(PC1)
|
||
DDRH |= (1 << 0) | (1 << 5) | (1 << 6);
|
||
DDRC |= (1 << 0) | (1 << 1);
|
||
// Pull RESET(PH0) low until we are ready
|
||
PORTH &= ~(1 << 0);
|
||
// Output a high signal on WR(PH5) RD(PH6), pins are active low therefore everything is disabled now
|
||
PORTH |= (1 << 5) | (1 << 6);
|
||
// Pull aleL(PC0) low and aleH(PC1) high
|
||
PORTC &= ~(1 << 0);
|
||
PORTC |= (1 << 1);
|
||
|
||
#ifdef clockgen_installed
|
||
// Adafruit Clock Generator
|
||
|
||
initializeClockOffset();
|
||
|
||
if (!i2c_found) {
|
||
display_Clear();
|
||
print_FatalError(F("Clock Generator not found"));
|
||
}
|
||
|
||
// Set Eeprom clock to 2Mhz
|
||
clockgen.set_freq(200000000ULL, SI5351_CLK1);
|
||
|
||
// Start outputting Eeprom clock
|
||
clockgen.output_enable(SI5351_CLK1, 1); // Eeprom clock
|
||
|
||
#else
|
||
// Set Eeprom Clock Pin(PH1) to Output
|
||
DDRH |= (1 << 1);
|
||
// Output a high signal
|
||
PORTH |= (1 << 1);
|
||
#endif
|
||
|
||
// Set Eeprom Data Pin(PH4) to Input
|
||
DDRH &= ~(1 << 4);
|
||
// Activate Internal Pullup Resistors
|
||
//PORTH |= (1 << 4);
|
||
|
||
// Set sram base address
|
||
sramBase = 0x08000000;
|
||
|
||
#ifdef clockgen_installed
|
||
// Wait for clock generator
|
||
clockgen.update_status();
|
||
#endif
|
||
|
||
// Wait until all is stable
|
||
delay(300);
|
||
|
||
// Pull RESET(PH0) high to start eeprom
|
||
PORTH |= (1 << 0);
|
||
}
|
||
|
||
/******************************************
|
||
Low level functions
|
||
*****************************************/
|
||
// Switch Cartridge address/data pins to write
|
||
void adOut_N64() {
|
||
//A0-A7
|
||
DDRF = 0xFF;
|
||
PORTF = 0x00;
|
||
//A8-A15
|
||
DDRK = 0xFF;
|
||
PORTK = 0x00;
|
||
}
|
||
|
||
// Switch Cartridge address/data pins to read
|
||
void adIn_N64() {
|
||
//A0-A7
|
||
DDRF = 0x00;
|
||
//A8-A15
|
||
DDRK = 0x00;
|
||
//Enable internal pull-up resistors
|
||
//PORTF = 0xFF;
|
||
//PORTK = 0xFF;
|
||
}
|
||
|
||
// Set Cartridge address
|
||
void setAddress_N64(unsigned long myAddress) {
|
||
// Set address pins to output
|
||
adOut_N64();
|
||
|
||
// Split address into two words
|
||
word myAdrLowOut = myAddress & 0xFFFF;
|
||
word myAdrHighOut = myAddress >> 16;
|
||
|
||
// Switch WR(PH5) RD(PH6) ale_L(PC0) ale_H(PC1) to high (since the pins are active low)
|
||
PORTH |= (1 << 5) | (1 << 6);
|
||
PORTC |= (1 << 1);
|
||
__asm__("nop\n\t");
|
||
PORTC |= (1 << 0);
|
||
|
||
// Output high part to address pins
|
||
PORTF = myAdrHighOut & 0xFF;
|
||
PORTK = (myAdrHighOut >> 8) & 0xFF;
|
||
|
||
// Leave ale_H high for additional 62.5ns
|
||
__asm__("nop\n\t");
|
||
|
||
// Pull ale_H(PC1) low
|
||
PORTC &= ~(1 << 1);
|
||
|
||
// Output low part to address pins
|
||
PORTF = myAdrLowOut & 0xFF;
|
||
PORTK = (myAdrLowOut >> 8) & 0xFF;
|
||
|
||
// Leave ale_L high for ~125ns
|
||
__asm__("nop\n\t"
|
||
"nop\n\t");
|
||
|
||
// Pull ale_L(PC0) low
|
||
PORTC &= ~(1 << 0);
|
||
|
||
// Wait ~600ns just to be sure address is set
|
||
__asm__("nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t");
|
||
|
||
// Set data pins to input
|
||
adIn_N64();
|
||
}
|
||
|
||
// Read one word out of the cartridge
|
||
word readWord_N64() {
|
||
// Pull read(PH6) low
|
||
PORTH &= ~(1 << 6);
|
||
|
||
// Wait ~310ns
|
||
__asm__("nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t");
|
||
|
||
// Join bytes from PINF and PINK into a word
|
||
word tempWord = ((PINK & 0xFF) << 8) | (PINF & 0xFF);
|
||
|
||
// Pull read(PH6) high
|
||
PORTH |= (1 << 6);
|
||
|
||
// Wait 62.5ns
|
||
__asm__("nop\n\t");
|
||
return tempWord;
|
||
}
|
||
|
||
// Write one word to data pins of the cartridge
|
||
void writeWord_N64(word myWord) {
|
||
// Set address pins to output
|
||
adOut_N64();
|
||
|
||
// Output word to AD0-AD15
|
||
PORTF = myWord & 0xFF;
|
||
PORTK = (myWord >> 8) & 0xFF;
|
||
|
||
// Wait ~62.5ns
|
||
__asm__("nop\n\t");
|
||
|
||
// Pull write(PH5) low
|
||
PORTH &= ~(1 << 5);
|
||
|
||
// Wait ~310ns
|
||
__asm__("nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t"
|
||
"nop\n\t");
|
||
|
||
// Pull write(PH5) high
|
||
PORTH |= (1 << 5);
|
||
|
||
// Wait ~125ns
|
||
__asm__("nop\n\t"
|
||
"nop\n\t");
|
||
|
||
// Set data pins to input
|
||
adIn_N64();
|
||
}
|
||
|
||
/******************************************
|
||
N64 Controller CRC Functions
|
||
*****************************************/
|
||
static word addrCRC(word address) {
|
||
const char n64_address_crc_table[] = { 0x15, 0x1F, 0x0B, 0x16, 0x19, 0x07, 0x0E, 0x1C, 0x0D, 0x1A, 0x01 };
|
||
const char* cur_xor = n64_address_crc_table;
|
||
byte crc = 0;
|
||
for (word mask = 0x0020; mask; mask <<= 1, cur_xor++) {
|
||
if (address & mask) {
|
||
crc ^= *cur_xor;
|
||
}
|
||
}
|
||
return (address & 0xFFE0) | crc;
|
||
}
|
||
|
||
static uint8_t dataCRC(uint8_t* data) {
|
||
uint8_t ret = 0;
|
||
for (uint8_t i = 0; i <= 32; i++) {
|
||
for (uint8_t mask = 0x80; mask; mask >>= 1) {
|
||
uint8_t tmp = ret & 0x80 ? 0x85 : 0;
|
||
ret <<= 1;
|
||
if (i < 32) {
|
||
if (data[i] & mask) {
|
||
ret |= 0x1;
|
||
}
|
||
}
|
||
ret ^= tmp;
|
||
}
|
||
}
|
||
return ret;
|
||
}
|
||
|
||
// Macro producing a delay loop waiting an number of cycles multiple of 3, with
|
||
// a range of 3 to 768 cycles (187.5ns to 48us). It takes 6 bytes to do so
|
||
// (3 instructions) making it the same size as the equivalent 3-cycles NOP
|
||
// delay. For shorter delays or non-multiple-of-3-cycle delays, add your own
|
||
// NOPs.
|
||
#define N64_DELAY_LOOP(cycle_count) \
|
||
do { \
|
||
byte i; \
|
||
__asm__ __volatile__("\n" \
|
||
"\tldi %[i], %[loop_count]\n" \
|
||
".delay_loop_%=:\n" \
|
||
"\tdec %[i]\n" \
|
||
"\tbrne .delay_loop_%=\n" \
|
||
: [i] "=r"(i) \
|
||
: [loop_count] "i"(cycle_count / 3) \
|
||
: "cc"); \
|
||
} while (0)
|
||
|
||
/******************************************
|
||
N64 Controller Protocol Functions
|
||
*****************************************/
|
||
void sendJoyBus(const byte* buffer, char length) {
|
||
// Implemented in assembly as there is very little wiggle room, timing-wise.
|
||
// Overall structure:
|
||
// outer_loop:
|
||
// mask = 0x80
|
||
// cur_byte = *(buffer++)
|
||
// inner_loop:
|
||
// falling edge
|
||
// if (cur_byte & mask) {
|
||
// wait 1us starting at the falling edge
|
||
// rising edge
|
||
// wait 2us starting at the rising edge
|
||
// } else {
|
||
// wait 3us starting at the falling edge
|
||
// rising edge
|
||
// }
|
||
// inner_common_codepath:
|
||
// mask >>= 1
|
||
// if (mask == 0)
|
||
// goto outer_loop_trailer
|
||
// wait +1us from the rising edge
|
||
// goto inner_loop
|
||
// outer_loop_trailer:
|
||
// length -= 1
|
||
// if (length == 0)
|
||
// goto stop_bit
|
||
// wait +1us from the rising edge
|
||
// goto outer_loop
|
||
// stop_bit:
|
||
// wait +1us from the rising edge
|
||
// falling edge
|
||
// wait 1us from the falling edge
|
||
// rising edge
|
||
|
||
byte mask, cur_byte, scratch;
|
||
// Note on DDRH: retrieve the current DDRH value, and pre-compute the values
|
||
// to write in order to drive the line high or low. This saves 3 cycles per
|
||
// transition: sts (2 cycles) instead of lds, or/and, sts (2 + 1 + 2 cycles).
|
||
// This means that no other code may run in parallel, but this function anyway
|
||
// requires interrupts to be disabled in order to work in the expected amount
|
||
// of time.
|
||
const byte line_low = DDRH | 0x10;
|
||
const byte line_high = line_low & 0xef;
|
||
__asm__ __volatile__("\n"
|
||
".outer_loop_%=:\n"
|
||
// mask = 0x80
|
||
"\tldi %[mask], 0x80\n" // 1
|
||
// load byte to send from memory
|
||
"\tld %[cur_byte], Z+\n" // 2
|
||
".inner_loop_%=:\n"
|
||
// Falling edge
|
||
"\tsts %[out_byte], %[line_low]\n" // 2
|
||
// Test cur_byte & mask, without clobbering either
|
||
"\tmov %[scratch], %[cur_byte]\n" // 1
|
||
"\tand %[scratch], %[mask]\n" // 1
|
||
"\tbreq .bit_is_0_%=\n" // bit is 1: 1, bit is 0: 2
|
||
|
||
// bit is a 1
|
||
// Stay low for 1us (16 cycles).
|
||
// Time before: 3 cycles (mov, and, breq-false).
|
||
// Time after: sts (2 cycles).
|
||
// So 11 to go, so 3 3-cycles iterations and 2 nop.
|
||
"\tldi %[scratch], 3\n" // 1
|
||
".delay_1_low_%=:\n"
|
||
"\tdec %[scratch]\n" // 1
|
||
"\tbrne .delay_1_low_%=\n" // exit: 1, loop: 2
|
||
"\tnop\n" // 1
|
||
"\tnop\n" // 1
|
||
// Rising edge
|
||
"\tsts %[out_byte], %[line_high]\n" // 2
|
||
// Wait for 2us (32 cycles) to sync with the bot_is_0 codepath.
|
||
// Time before: 0 cycles.
|
||
// Time after: 2 cycles (rjmp).
|
||
// So 30 to go, so 10 3-cycles iterations and 0 nop.
|
||
"\tldi %[scratch], 10\n" // 1
|
||
".delay_1_high_%=:\n"
|
||
"\tdec %[scratch]\n" // 1
|
||
"\tbrne .delay_1_high_%=\n" // exit: 1, loop: 2
|
||
"\trjmp .inner_common_path_%=\n" // 2
|
||
|
||
".bit_is_0_%=:\n"
|
||
// bit is a 0
|
||
// Stay high for 3us (48 cycles).
|
||
// Time before: 4 cycles (mov, and, breq-true).
|
||
// Time after: 2 cycles (sts).
|
||
// So 42 to go, so 14 3-cycles iterations, and 0 nop.
|
||
"\tldi %[scratch], 14\n" // 1
|
||
".delay_0_low_%=:\n"
|
||
"\tdec %[scratch]\n" // 1
|
||
"\tbrne .delay_0_low_%=\n" // exit: 1, loop: 2
|
||
// Rising edge
|
||
"\tsts %[out_byte], %[line_high]\n" // 2
|
||
|
||
// codepath common to both possible values
|
||
".inner_common_path_%=:\n"
|
||
"\tnop\n" // 1
|
||
"\tlsr %[mask]\n" // 1
|
||
"\tbreq .outer_loop_trailer_%=\n" // mask!=0: 1, mask==0: 2
|
||
// Stay high for 1us (16 cycles).
|
||
// Time before: 3 cycles (nop, lsr, breq-false).
|
||
// Time after: 4 cycles (rjmp, sts)
|
||
// So 9 to go, so 3 3-cycles iterations and 0 nop.
|
||
"\tldi %[scratch], 3\n" // 1
|
||
".delay_common_high_%=:\n"
|
||
"\tdec %[scratch]\n" // 1
|
||
"\tbrne .delay_common_high_%=\n" // exit: 1, loop: 2
|
||
"\trjmp .inner_loop_%=\n" // 2
|
||
|
||
".outer_loop_trailer_%=:\n"
|
||
"\tdec %[length]\n" // 1
|
||
"\tbreq .stop_bit_%=\n" // length!=0: 1, length==0: 2
|
||
// Stay high for 1us (16 cycles).
|
||
// Time before: 6 cycles (lsr, nop, breq-true, dec, breq-false).
|
||
// Time after: 7 cycles (rjmp, ldi, ld, sts).
|
||
// So 3 to go, so 3 nop (for simplicity).
|
||
"\tnop\n" // 1
|
||
"\tnop\n" // 1
|
||
"\tnop\n" // 1
|
||
"\trjmp .outer_loop_%=\n" // 2
|
||
// Done sending data, send a stop bit.
|
||
".stop_bit_%=:\n"
|
||
// Stay high for 1us (16 cycles).
|
||
// Time before: 7 cycles (lsr, nop, breq-true, dec, breq-true).
|
||
// Time after: 2 cycles (sts).
|
||
// So 7 to go, so 2 3-cycles iterations and 1 nop.
|
||
"\tldi %[scratch], 2\n" // 1
|
||
".delay_stop_high_%=:\n"
|
||
"\tdec %[scratch]\n" // 1
|
||
"\tbrne .delay_stop_high_%=\n" // exit: 1, loop: 2
|
||
"\tnop\n"
|
||
"\tsts %[out_byte], %[line_low]\n" // 2
|
||
// Stay low for 1us (16 cycles).
|
||
// Time before: 0 cycles.
|
||
// Time after: 2 cycles (sts).
|
||
// So 14 to go, so 4 3-cycles iterations and 2 nop.
|
||
"\tldi %[scratch], 5\n" // 1
|
||
".delay_stop_low_%=:\n"
|
||
"\tdec %[scratch]\n" // 1
|
||
"\tbrne .delay_stop_low_%=\n" // exit: 1, loop: 2
|
||
"\tnop\n"
|
||
"\tnop\n"
|
||
"\tsts %[out_byte], %[line_high]\n" // 2
|
||
// Notes on arguments:
|
||
// - mask and scratch are used wth "ldi", which can only work on registers
|
||
// 16 to 31, so tag these with "a" rather than the generic "r"
|
||
// - mark all output-only arguments as early-clobber ("&"), as input
|
||
// registers are used throughout all iterations and both sets must be
|
||
// strictly distinct
|
||
// - tag buffer with "z", to use the "ld r?, Z+" instruction (load from
|
||
// 16bits RAM address and postincrement, in 2 cycles).
|
||
// XXX: any pointer register pair would do, but mapping to Z explicitly
|
||
// because I cannot find a way to get one of "X", "Y" or "Z" to appear
|
||
// when expanding "%[buffer]", causing the assembler to reject the
|
||
// instruction. Pick Z as it is the only call-used such register,
|
||
// avoiding the need to preserve any value a caller may have set it to.
|
||
: [buffer] "+z"(buffer),
|
||
[length] "+r"(length),
|
||
[cur_byte] "=&r"(cur_byte),
|
||
[mask] "=&a"(mask),
|
||
[scratch] "=&a"(scratch)
|
||
: [line_low] "r"(line_low),
|
||
[line_high] "r"(line_high),
|
||
[out_byte] "i"(&DDRH)
|
||
: "cc", "memory");
|
||
}
|
||
|
||
word recvJoyBus(byte* output, byte byte_count) {
|
||
// listen for expected byte_count bytes of data back from the controller
|
||
// return the number of bytes not (fully) received if the delay for a signal
|
||
// edge takes too long.
|
||
|
||
// Implemented in assembly as there is very little wiggle room, timing-wise.
|
||
// Overall structure:
|
||
// mask = 0x80
|
||
// cur_byte = 0
|
||
// read_loop:
|
||
// wait for falling edge
|
||
// wait for a bit more than 1us
|
||
// if input:
|
||
// cur_byte |= mask
|
||
// mask >>= 1
|
||
// if (mask == 0)
|
||
// if (--byte_count == 0)
|
||
// goto read_end
|
||
// append cur_byte to output
|
||
// mask = 0x80
|
||
// cur_byte = 0
|
||
// wait for data high
|
||
// goto read_loop
|
||
// read_end:
|
||
// return byte_count
|
||
|
||
byte mask, cur_byte, timeout, scratch;
|
||
__asm__ __volatile__("\n"
|
||
"\tldi %[mask], 0x80\n"
|
||
"\tclr %[cur_byte]\n"
|
||
".read_loop_%=:\n"
|
||
// Wait for input to be low. Time out if it takes more than ~27us (~7 bits
|
||
// worth of time) for it to go low.
|
||
// Takes 5 cycles to exit on input-low iteration (lds, sbrs-false, rjmp).
|
||
// Takes 7 cycles to loop on input-high iteration (lds, sbrs-true, dec,
|
||
// brne-true).
|
||
"\tldi %[timeout], 0x3f\n" // 1
|
||
".read_wait_falling_edge_%=:\n"
|
||
"\tlds %[scratch], %[in_byte]\n" // 2
|
||
"\tsbrs %[scratch], %[in_bit]\n" // low: 1, high: 2
|
||
"\trjmp .read_input_low_%=\n" // 2
|
||
"\tdec %[timeout]\n" // 1
|
||
"\tbrne .read_wait_falling_edge_%=\n" // timeout==0: 1, timeout!=0: 2
|
||
"\trjmp .read_end_%=\n" // 2
|
||
|
||
".read_input_low_%=:\n"
|
||
// Wait for 1500 us (24 cycles) before reading input.
|
||
// As it takes from 5 to 7 cycles for the prevous loop to exit,
|
||
// this means this loop exits from 1812.5us to 1937.5us after the falling
|
||
// edge, so at least 812.5us after a 1-bit rising edge, and at least
|
||
// 1062.5us before a 0-bit rising edge.
|
||
// This also leaves us with up to 2062.5us (33 cycles) to update cur_byte,
|
||
// possibly moving on to the next byte, waiting for a high input, and
|
||
// waiting for the next falling edge.
|
||
// Time taken until waiting for input high for non-last byte:
|
||
// - shift to current byte:
|
||
// - 1: 4 cycles (lds, sbrc-false, or)
|
||
// - 0: 4 cycles (lds, sbrc-true)
|
||
// - byte done: 8 cycles (lsr, brne-false, st, dec, brne-false, ldi, clr)
|
||
// - byte not done: 3 cycles (lsr, brne-true)
|
||
// Total: 7 to 12 cycles, so there are at least 21 cycles left until the
|
||
// next bit.
|
||
"\tldi %[timeout], 8\n" // 1
|
||
".read_wait_low_%=:\n"
|
||
"\tdec %[timeout]\n" // 1
|
||
"\tbrne .read_wait_low_%=\n" // timeout=0: 1, timeout!=0: 2
|
||
|
||
// Sample input
|
||
"\tlds %[scratch], %[in_byte]\n" // 2
|
||
// Add to cur_byte
|
||
"\tsbrc %[scratch], %[in_bit]\n" // high: 1, low: 2
|
||
"\tor %[cur_byte], %[mask]\n" // 1
|
||
// Shift mask
|
||
"\tlsr %[mask]\n"
|
||
"\tbrne .read_wait_input_high_init_%=\n" // mask==0: 1, mask!=0: 2
|
||
// A wole byte was read, store in output
|
||
"\tst Z+, %[cur_byte]\n" // 2
|
||
// Decrement byte count
|
||
"\tdec %[byte_count]\n" // 1
|
||
// Are we done reading ?
|
||
"\tbreq .read_end_%=\n" // byte_count!=0: 1, byte_count==0: 2
|
||
// No, prepare for reading another
|
||
"\tldi %[mask], 0x80\n"
|
||
"\tclr %[cur_byte]\n"
|
||
|
||
// Wait for rising edge
|
||
".read_wait_input_high_init_%=:"
|
||
"\tldi %[timeout], 0x3f\n" // 1
|
||
".read_wait_input_high_%=:\n"
|
||
"\tlds %[scratch], %[in_byte]\n" // 2
|
||
"\tsbrc %[scratch], %[in_bit]\n" // high: 1, low: 2
|
||
"\trjmp .read_loop_%=\n" // 2
|
||
"\tdec %[timeout]\n" // 1
|
||
"\tbrne .read_wait_input_high_%=\n" // timeout==0: 1, timeout!=0: 2
|
||
"\trjmp .read_end_%=\n" // 2
|
||
".read_end_%=:\n"
|
||
: [output] "+z"(output),
|
||
[byte_count] "+r"(byte_count),
|
||
[mask] "=&a"(mask),
|
||
[cur_byte] "=&r"(cur_byte),
|
||
[timeout] "=&a"(timeout),
|
||
[scratch] "=&a"(scratch)
|
||
: [in_byte] "i"(&PINH),
|
||
[in_bit] "i"(4)
|
||
: "cc", "memory");
|
||
return byte_count;
|
||
}
|
||
|
||
/******************************************
|
||
N64 Controller Functions
|
||
*****************************************/
|
||
void get_button() {
|
||
// Command to send to the gamecube
|
||
// The last bit is rumble, flip it to rumble
|
||
const byte command[] = { 0x01 };
|
||
byte response[4];
|
||
|
||
// don't want interrupts getting in the way
|
||
noInterrupts();
|
||
sendJoyBus(command, sizeof(command));
|
||
recvJoyBus(response, sizeof(response));
|
||
// end of time sensitive code
|
||
interrupts();
|
||
|
||
// These are 8 bit values centered at 0x80 (128)
|
||
N64_status.stick_x = response[2];
|
||
N64_status.stick_y = response[3];
|
||
|
||
// Buttons (A,B,Z,S,DU,DD,DL,DR,0,0,L,R,CU,CD,CL,CR)
|
||
if (response[0] & 0x80)
|
||
button = F("A");
|
||
else if (response[0] & 0x40)
|
||
button = F("B");
|
||
else if (response[0] & 0x20)
|
||
button = F("Z");
|
||
else if (response[0] & 0x10)
|
||
button = F("START");
|
||
else if (response[0] & 0x08)
|
||
button = F("D-Up");
|
||
else if (response[0] & 0x04)
|
||
button = F("D-Down");
|
||
else if (response[0] & 0x02)
|
||
button = F("D-Left");
|
||
else if (response[0] & 0x01)
|
||
button = F("D-Right");
|
||
//else if (response[1] & 0x80)
|
||
//else if (response[1] & 0x40)
|
||
else if (response[1] & 0x20)
|
||
button = F("L");
|
||
else if (response[1] & 0x10)
|
||
button = F("R");
|
||
else if (response[1] & 0x08)
|
||
button = F("C-Up");
|
||
else if (response[1] & 0x04)
|
||
button = F("C-Down");
|
||
else if (response[1] & 0x02)
|
||
button = F("C-Left");
|
||
else if (response[1] & 0x01)
|
||
button = F("C-Right");
|
||
else {
|
||
lastbutton = button;
|
||
button = F("Press a button");
|
||
}
|
||
}
|
||
|
||
|
||
/******************************************
|
||
N64 Controller Test
|
||
*****************************************/
|
||
#ifdef enable_serial
|
||
void controllerTest_Serial() {
|
||
while (quit) {
|
||
// Get Button and analog stick
|
||
get_button();
|
||
|
||
// Print Button
|
||
String buttonc = String("Button: " + String(button) + " ");
|
||
Serial.print(buttonc);
|
||
|
||
// Print Stick X Value
|
||
String stickx = String("X: " + String(N64_status.stick_x, DEC) + " ");
|
||
Serial.print(stickx);
|
||
|
||
// Print Stick Y Value
|
||
String sticky = String(" Y: " + String(N64_status.stick_y, DEC) + " ");
|
||
Serial.println(sticky);
|
||
|
||
if (button == "Press a button" && lastbutton == "Z") {
|
||
// Quit
|
||
Serial.println("");
|
||
quit = 0;
|
||
}
|
||
}
|
||
}
|
||
#endif
|
||
|
||
#if (defined(enable_LCD) || defined(enable_OLED))
|
||
#define CENTER 64
|
||
// on which screens do we start
|
||
int startscreen = 1;
|
||
int test = 1;
|
||
|
||
void printSTR(String st, int x, int y) {
|
||
char buf[st.length() + 1];
|
||
|
||
if (x == CENTER) {
|
||
x = 64 - (((st.length() - 5) / 2) * 4);
|
||
}
|
||
|
||
st.toCharArray(buf, st.length() + 1);
|
||
display.drawStr(x, y, buf);
|
||
}
|
||
|
||
void nextscreen() {
|
||
if (button == "Press a button" && lastbutton == "START") {
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
if (startscreen != 4)
|
||
startscreen = startscreen + 1;
|
||
else {
|
||
startscreen = 1;
|
||
test = 1;
|
||
}
|
||
} else if (button == "Press a button" && lastbutton == "Z" && startscreen == 4) {
|
||
// Quit
|
||
quit = 0;
|
||
}
|
||
}
|
||
|
||
void controllerTest_Display() {
|
||
boolean cmode = 1;
|
||
|
||
//name of the current displayed result
|
||
String anastick = "";
|
||
|
||
// Graph
|
||
int xax = 24; // midpoint x
|
||
int yax = 24; // midpoint y
|
||
|
||
// variables to display test data of different sticks
|
||
int upx = 0;
|
||
int upy = 0;
|
||
int uprightx = 0;
|
||
int uprighty = 0;
|
||
int rightx = 0;
|
||
int righty = 0;
|
||
int downrightx = 0;
|
||
int downrighty = 0;
|
||
int downx = 0;
|
||
int downy = 0;
|
||
int downleftx = 0;
|
||
int downlefty = 0;
|
||
int leftx = 0;
|
||
int lefty = 0;
|
||
int upleftx = 0;
|
||
int uplefty = 0;
|
||
|
||
// variables to save test data
|
||
int bupx = 0;
|
||
int bupy = 0;
|
||
int buprightx = 0;
|
||
int buprighty = 0;
|
||
int brightx = 0;
|
||
int brighty = 0;
|
||
int bdownrightx = 0;
|
||
int bdownrighty = 0;
|
||
int bdownx = 0;
|
||
int bdowny = 0;
|
||
int bdownleftx = 0;
|
||
int bdownlefty = 0;
|
||
int bleftx = 0;
|
||
int blefty = 0;
|
||
int bupleftx = 0;
|
||
int buplefty = 0;
|
||
int results = 0;
|
||
int prevStickX = 0;
|
||
|
||
String stickx;
|
||
String sticky;
|
||
String stickx_old;
|
||
String sticky_old;
|
||
String button_old;
|
||
|
||
while (quit) {
|
||
// Get Button and analog stick
|
||
get_button();
|
||
|
||
switch (startscreen) {
|
||
case 1:
|
||
{
|
||
display.drawStr(32, 8, "Controller Test");
|
||
display.drawLine(0, 10, 128, 10);
|
||
|
||
// Delete old button value
|
||
if (button_old != button) {
|
||
display.setDrawColor(0);
|
||
for (byte y = 13; y < 22; y++) {
|
||
display.drawLine(0, y, 128, y);
|
||
}
|
||
display.setDrawColor(1);
|
||
}
|
||
// Print button
|
||
printSTR(" " + button + " ", CENTER, 20);
|
||
// Save value
|
||
button_old = button;
|
||
|
||
// Update stick values
|
||
stickx = String("X: " + String(N64_status.stick_x, DEC) + " ");
|
||
sticky = String("Y: " + String(N64_status.stick_y, DEC) + " ");
|
||
|
||
// Delete old stick values
|
||
if ((stickx_old != stickx) || (sticky_old != sticky)) {
|
||
display.setDrawColor(0);
|
||
for (byte y = 31; y < 38; y++) {
|
||
display.drawLine(0, y, 128, y);
|
||
}
|
||
display.setDrawColor(1);
|
||
}
|
||
|
||
// Print stick values
|
||
printSTR(stickx, 36, 38);
|
||
printSTR(sticky, 74, 38);
|
||
// Save values
|
||
stickx_old = stickx;
|
||
sticky_old = sticky;
|
||
|
||
printSTR("(Continue with START)", 16, 55);
|
||
|
||
//Update LCD
|
||
display.updateDisplay();
|
||
|
||
// go to next screen
|
||
nextscreen();
|
||
break;
|
||
}
|
||
case 2:
|
||
{
|
||
display.drawStr(36, 8, "Range Test");
|
||
display.drawLine(0, 9, 128, 9);
|
||
|
||
if (cmode == 0) {
|
||
// Print Stick X Value
|
||
String stickx = String("X:" + String(N64_status.stick_x, DEC) + " ");
|
||
printSTR(stickx, 22 + 54, 26);
|
||
|
||
// Print Stick Y Value
|
||
String sticky = String("Y:" + String(N64_status.stick_y, DEC) + " ");
|
||
printSTR(sticky, 22 + 54, 36);
|
||
}
|
||
|
||
// Draw Axis
|
||
display.drawPixel(10 + xax, 12 + yax);
|
||
display.drawPixel(10 + xax, 12 + yax - 80 / 4);
|
||
display.drawPixel(10 + xax, 12 + yax + 80 / 4);
|
||
display.drawPixel(10 + xax + 80 / 4, 12 + yax);
|
||
display.drawPixel(10 + xax - 80 / 4, 12 + yax);
|
||
|
||
// Draw corners
|
||
display.drawPixel(10 + xax - 68 / 4, 12 + yax - 68 / 4);
|
||
display.drawPixel(10 + xax + 68 / 4, 12 + yax + 68 / 4);
|
||
display.drawPixel(10 + xax + 68 / 4, 12 + yax - 68 / 4);
|
||
display.drawPixel(10 + xax - 68 / 4, 12 + yax + 68 / 4);
|
||
|
||
//Draw Analog Stick
|
||
if (cmode == 1) {
|
||
display.drawPixel(10 + xax + N64_status.stick_x / 4, 12 + yax - N64_status.stick_y / 4);
|
||
//Update LCD
|
||
display.updateDisplay();
|
||
} else {
|
||
display.drawCircle(10 + xax + N64_status.stick_x / 4, 12 + yax - N64_status.stick_y / 4, 2);
|
||
//Update LCD
|
||
display.updateDisplay();
|
||
display_Clear_Slow();
|
||
}
|
||
|
||
// switch mode
|
||
if (button == "Press a button" && lastbutton == "Z") {
|
||
if (cmode == 0) {
|
||
cmode = 1;
|
||
display.clearDisplay();
|
||
} else {
|
||
cmode = 0;
|
||
display.clearDisplay();
|
||
}
|
||
}
|
||
// go to next screen
|
||
nextscreen();
|
||
break;
|
||
}
|
||
case 3:
|
||
{
|
||
display.setDrawColor(0);
|
||
display.drawPixel(22 + prevStickX, 40);
|
||
display.setDrawColor(1);
|
||
printSTR("Skipping Test", 34, 8);
|
||
display.drawLine(0, 9, 128, 9);
|
||
display.drawFrame(22 + 0, 15, 22 + 59, 21);
|
||
if (N64_status.stick_x > 0) {
|
||
display.drawLine(22 + N64_status.stick_x, 15, 22 + N64_status.stick_x, 35);
|
||
display.drawPixel(22 + N64_status.stick_x, 40);
|
||
prevStickX = N64_status.stick_x;
|
||
}
|
||
|
||
printSTR("Try to fill the box by", 22, 45);
|
||
printSTR("slowly moving right", 22, 55);
|
||
//Update LCD
|
||
display.updateDisplay();
|
||
|
||
if (button == "Press a button" && lastbutton == "Z") {
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
// go to next screen
|
||
nextscreen();
|
||
break;
|
||
}
|
||
case 4:
|
||
{
|
||
switch (test) {
|
||
case 0: // Display results
|
||
{
|
||
switch (results) {
|
||
case 0:
|
||
{
|
||
anastick = "Your Stick";
|
||
upx = bupx;
|
||
upy = bupy;
|
||
uprightx = buprightx;
|
||
uprighty = buprighty;
|
||
rightx = brightx;
|
||
righty = brighty;
|
||
downrightx = bdownrightx;
|
||
downrighty = bdownrighty;
|
||
downx = bdownx;
|
||
downy = bdowny;
|
||
downleftx = bdownleftx;
|
||
downlefty = bdownlefty;
|
||
leftx = bleftx;
|
||
lefty = blefty;
|
||
upleftx = bupleftx;
|
||
uplefty = buplefty;
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
results = 1;
|
||
display.clearDisplay();
|
||
break;
|
||
}
|
||
printSTR(anastick, 22 + 50, 15);
|
||
|
||
display.drawStr(22 + 50, 25, "U:");
|
||
printSTR(String(upy), 100, 25);
|
||
display.drawStr(22 + 50, 35, "D:");
|
||
printSTR(String(downy), 100, 35);
|
||
display.drawStr(22 + 50, 45, "L:");
|
||
printSTR(String(leftx), 100, 45);
|
||
display.drawStr(22 + 50, 55, "R:");
|
||
printSTR(String(rightx), 100, 55);
|
||
|
||
display.drawLine(xax + upx / 4, yax - upy / 4, xax + uprightx / 4, yax - uprighty / 4);
|
||
display.drawLine(xax + uprightx / 4, yax - uprighty / 4, xax + rightx / 4, yax - righty / 4);
|
||
display.drawLine(xax + rightx / 4, yax - righty / 4, xax + downrightx / 4, yax - downrighty / 4);
|
||
display.drawLine(xax + downrightx / 4, yax - downrighty / 4, xax + downx / 4, yax - downy / 4);
|
||
display.drawLine(xax + downx / 4, yax - downy / 4, xax + downleftx / 4, yax - downlefty / 4);
|
||
display.drawLine(xax + downleftx / 4, yax - downlefty / 4, xax + leftx / 4, yax - lefty / 4);
|
||
display.drawLine(xax + leftx / 4, yax - lefty / 4, xax + upleftx / 4, yax - uplefty / 4);
|
||
display.drawLine(xax + upleftx / 4, yax - uplefty / 4, xax + upx / 4, yax - upy / 4);
|
||
|
||
display.drawPixel(xax, yax);
|
||
|
||
//Update LCD
|
||
display.updateDisplay();
|
||
break;
|
||
}
|
||
case 1:
|
||
{
|
||
anastick = "Original";
|
||
upx = 1;
|
||
upy = 84;
|
||
uprightx = 67;
|
||
uprighty = 68;
|
||
rightx = 83;
|
||
righty = -2;
|
||
downrightx = 67;
|
||
downrighty = -69;
|
||
downx = 3;
|
||
downy = -85;
|
||
downleftx = -69;
|
||
downlefty = -70;
|
||
leftx = -85;
|
||
lefty = 0;
|
||
upleftx = -68;
|
||
uplefty = 68;
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
results = 0;
|
||
display.clearDisplay();
|
||
break;
|
||
}
|
||
printSTR(anastick, 22 + 50, 15);
|
||
|
||
display.drawStr(22 + 50, 25, "U:");
|
||
printSTR(String(upy), 100, 25);
|
||
display.drawStr(22 + 50, 35, "D:");
|
||
printSTR(String(downy), 100, 35);
|
||
display.drawStr(22 + 50, 45, "L:");
|
||
printSTR(String(leftx), 100, 45);
|
||
display.drawStr(22 + 50, 55, "R:");
|
||
printSTR(String(rightx), 100, 55);
|
||
|
||
display.drawLine(xax + upx / 4, yax - upy / 4, xax + uprightx / 4, yax - uprighty / 4);
|
||
display.drawLine(xax + uprightx / 4, yax - uprighty / 4, xax + rightx / 4, yax - righty / 4);
|
||
display.drawLine(xax + rightx / 4, yax - righty / 4, xax + downrightx / 4, yax - downrighty / 4);
|
||
display.drawLine(xax + downrightx / 4, yax - downrighty / 4, xax + downx / 4, yax - downy / 4);
|
||
display.drawLine(xax + downx / 4, yax - downy / 4, xax + downleftx / 4, yax - downlefty / 4);
|
||
display.drawLine(xax + downleftx / 4, yax - downlefty / 4, xax + leftx / 4, yax - lefty / 4);
|
||
display.drawLine(xax + leftx / 4, yax - lefty / 4, xax + upleftx / 4, yax - uplefty / 4);
|
||
display.drawLine(xax + upleftx / 4, yax - uplefty / 4, xax + upx / 4, yax - upy / 4);
|
||
|
||
display.drawPixel(xax, yax);
|
||
|
||
//Update LCD
|
||
display.updateDisplay();
|
||
break;
|
||
}
|
||
|
||
} //results
|
||
break;
|
||
} //display results
|
||
|
||
case 1: // +y Up
|
||
{
|
||
display.drawStr(34, 26, "Hold Stick Up");
|
||
display.drawStr(34, 34, "then press A");
|
||
//display.drawBitmap(110, 60, ana1);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
bupx = N64_status.stick_x;
|
||
bupy = N64_status.stick_y;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
test = 2;
|
||
}
|
||
break;
|
||
}
|
||
|
||
case 2: // +y+x Up-Right
|
||
{
|
||
display.drawStr(42, 26, "Up-Right");
|
||
//display.drawBitmap(110, 60, ana2);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
buprightx = N64_status.stick_x;
|
||
buprighty = N64_status.stick_y;
|
||
test = 3;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
break;
|
||
}
|
||
|
||
case 3: // +x Right
|
||
{
|
||
display.drawStr(50, 26, "Right");
|
||
//display.drawBitmap(110, 60, ana3);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
brightx = N64_status.stick_x;
|
||
brighty = N64_status.stick_y;
|
||
test = 4;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
break;
|
||
}
|
||
|
||
case 4: // -y+x Down-Right
|
||
{
|
||
display.drawStr(38, 26, "Down-Right");
|
||
//display.drawBitmap(110, 60, ana4);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
bdownrightx = N64_status.stick_x;
|
||
bdownrighty = N64_status.stick_y;
|
||
test = 5;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
break;
|
||
}
|
||
|
||
case 5: // -y Down
|
||
{
|
||
display.drawStr(49, 26, "Down");
|
||
//display.drawBitmap(110, 60, ana5);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
bdownx = N64_status.stick_x;
|
||
bdowny = N64_status.stick_y;
|
||
test = 6;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
break;
|
||
}
|
||
|
||
case 6: // -y-x Down-Left
|
||
{
|
||
display.drawStr(39, 26, "Down-Left");
|
||
//display.drawBitmap(110, 60, ana6);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
bdownleftx = N64_status.stick_x;
|
||
bdownlefty = N64_status.stick_y;
|
||
test = 7;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
break;
|
||
}
|
||
|
||
case 7: // -x Left
|
||
{
|
||
display.drawStr(51, 26, "Left");
|
||
//display.drawBitmap(110, 60, ana7);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
bleftx = N64_status.stick_x;
|
||
blefty = N64_status.stick_y;
|
||
test = 8;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
break;
|
||
}
|
||
|
||
case 8: // +y+x Up-Left
|
||
{
|
||
display.drawStr(43, 26, "Up-Left");
|
||
//display.drawBitmap(110, 60, ana8);
|
||
|
||
if (button == "Press a button" && lastbutton == "A") {
|
||
bupleftx = N64_status.stick_x;
|
||
buplefty = N64_status.stick_y;
|
||
test = 0;
|
||
// reset button
|
||
lastbutton = "N/A";
|
||
|
||
display.clearDisplay();
|
||
}
|
||
break;
|
||
}
|
||
}
|
||
if (test != 0) {
|
||
display.drawStr(38, 8, "Benchmark");
|
||
display.drawLine(0, 9, 128, 9);
|
||
}
|
||
display.updateDisplay();
|
||
// go to next screen
|
||
nextscreen();
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
#endif
|
||
|
||
/******************************************
|
||
N64 Controller Pak Functions
|
||
(connected via Controller)
|
||
*****************************************/
|
||
// Reset the controller
|
||
void resetController() {
|
||
const byte command[] = { 0xFF };
|
||
noInterrupts();
|
||
sendJoyBus(command, sizeof(command));
|
||
interrupts();
|
||
delay(100);
|
||
}
|
||
|
||
// read 3 bytes from controller
|
||
void checkController() {
|
||
byte response[8];
|
||
const byte command[] = { 0x00 };
|
||
|
||
display_Clear();
|
||
|
||
// Check if line is HIGH
|
||
if (!N64_QUERY)
|
||
print_FatalError(F("Data line LOW"));
|
||
|
||
// don't want interrupts getting in the way
|
||
noInterrupts();
|
||
sendJoyBus(command, sizeof(command));
|
||
recvJoyBus(response, sizeof(response));
|
||
// end of time sensitive code
|
||
interrupts();
|
||
|
||
if (response[0] != 0x05)
|
||
print_FatalError(F("Controller not found"));
|
||
if (response[2] != 0x01)
|
||
print_FatalError(F("Controller Pak not found"));
|
||
}
|
||
|
||
// read 32bytes from controller pak and calculate CRC
|
||
byte readBlock(byte* output, word myAddress) {
|
||
byte response_crc;
|
||
// Calculate the address CRC
|
||
word myAddressCRC = addrCRC(myAddress);
|
||
const byte command[] = { 0x02, (byte)(myAddressCRC >> 8), (byte)(myAddressCRC & 0xff) };
|
||
word error;
|
||
|
||
// don't want interrupts getting in the way
|
||
noInterrupts();
|
||
sendJoyBus(command, sizeof(command));
|
||
error = recvJoyBus(output, 32);
|
||
if (error == 0)
|
||
error = recvJoyBus(&response_crc, 1);
|
||
// end of time sensitive code
|
||
interrupts();
|
||
|
||
if (error) {
|
||
myFile.close();
|
||
println_Msg(F("Controller Pak was"));
|
||
println_Msg(F("not dumped due to a"));
|
||
print_FatalError(F("read timeout"));
|
||
}
|
||
|
||
// Compare with computed CRC
|
||
if (response_crc != dataCRC(output)) {
|
||
display_Clear();
|
||
// Close the file:
|
||
myFile.close();
|
||
println_Msg(F("Controller Pak was"));
|
||
println_Msg(F("not dumped due to a"));
|
||
print_FatalError(F("protocol CRC error"));
|
||
}
|
||
|
||
return response_crc;
|
||
}
|
||
|
||
// reads the MPK file to the sd card
|
||
void readMPK() {
|
||
// Change to root
|
||
sd.chdir("/");
|
||
// Make MPK directory
|
||
sd.mkdir("N64/MPK", true);
|
||
// Change to MPK directory
|
||
sd.chdir("N64/MPK");
|
||
|
||
// Get name, add extension and convert to char array for sd lib
|
||
EEPROM_readAnything(0, foldern);
|
||
sprintf(fileName, "%d", foldern);
|
||
strcat(fileName, ".mpk");
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(0, foldern);
|
||
|
||
//open crc file on sd card
|
||
sprintf(filePath, "%d", foldern - 1);
|
||
strcat(filePath, ".crc");
|
||
FsFile crcFile;
|
||
if (!crcFile.open(filePath, O_RDWR | O_CREAT)) {
|
||
print_FatalError(open_file_STR);
|
||
}
|
||
|
||
//open mpk file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_FatalError(open_file_STR);
|
||
}
|
||
|
||
print_Msg(F("Saving N64/MPK/"));
|
||
println_Msg(fileName);
|
||
display_Update();
|
||
|
||
// Dummy write because first write to file takes 1 second and messes up timing
|
||
blinkLED();
|
||
myFile.write(0xFF);
|
||
myFile.rewind();
|
||
blinkLED();
|
||
|
||
//Initialize progress bar
|
||
uint32_t processedProgressBar = 0;
|
||
uint32_t totalProgressBar = (uint32_t)(0x7FFF);
|
||
draw_progressbar(0, totalProgressBar);
|
||
|
||
// Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
|
||
for (word currSdBuffer = 0x0000; currSdBuffer < 0x8000; currSdBuffer += 512) {
|
||
// Read 32 byte block into sdBuffer
|
||
for (word currBlock = 0; currBlock < sizeof(sdBuffer); currBlock += 32) {
|
||
// Read one block of the Controller Pak into array myBlock and write CRC of that block to crc file
|
||
crcFile.write(readBlock(&sdBuffer[currBlock], currSdBuffer + currBlock));
|
||
|
||
// Real N64 has about 627us pause between banks, add a bit extra delay
|
||
if (currBlock < 479)
|
||
delayMicroseconds(800);
|
||
}
|
||
// This will take 1300us
|
||
blinkLED();
|
||
myFile.write(sdBuffer, sizeof(sdBuffer));
|
||
// Blink led
|
||
blinkLED();
|
||
// Update progress bar
|
||
processedProgressBar += 512;
|
||
draw_progressbar(processedProgressBar, totalProgressBar);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
crcFile.close();
|
||
}
|
||
|
||
// verifies if read was successful
|
||
void verifyCRC() {
|
||
writeErrors = 0;
|
||
|
||
print_STR(verifying_STR, 1);
|
||
display_Update();
|
||
|
||
//open CRC file on sd card
|
||
FsFile crcFile;
|
||
if (!crcFile.open(filePath, O_READ)) {
|
||
print_FatalError(open_file_STR);
|
||
}
|
||
|
||
//open MPK file on sd card
|
||
if (!myFile.open(fileName, O_READ)) {
|
||
print_FatalError(open_file_STR);
|
||
}
|
||
|
||
//Initialize progress bar
|
||
uint32_t processedProgressBar = 0;
|
||
uint32_t totalProgressBar = (uint32_t)(0x7FFF);
|
||
draw_progressbar(0, totalProgressBar);
|
||
|
||
// Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
|
||
for (word currSdBuffer = 0x0000; currSdBuffer < 0x8000; currSdBuffer += 512) {
|
||
// Read 32 bytes into SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Compare 32 byte block CRC to CRC from file
|
||
for (word currBlock = 0; currBlock < 512; currBlock += 32) {
|
||
// Calculate CRC of block and compare against crc file
|
||
if (dataCRC(&sdBuffer[currBlock]) != crcFile.read())
|
||
writeErrors++;
|
||
}
|
||
|
||
// Blink led
|
||
blinkLED();
|
||
// Update progress bar
|
||
processedProgressBar += 512;
|
||
draw_progressbar(processedProgressBar, totalProgressBar);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
crcFile.close();
|
||
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("Saved successfully"));
|
||
sd.remove(filePath);
|
||
display_Update();
|
||
} else {
|
||
print_STR(error_STR, 0);
|
||
print_Msg(writeErrors);
|
||
println_Msg(F(" blocks "));
|
||
print_Error(did_not_verify_STR);
|
||
}
|
||
}
|
||
|
||
// Calculates the checksum of the header
|
||
boolean checkHeader(byte* buf) {
|
||
word sum = 0;
|
||
word buf_sum = (buf[28] << 8) + buf[29];
|
||
|
||
// first 28 bytes are the header, then comes the checksum(word) followed by the reverse checksum(0xFFF2 - checksum)
|
||
for (byte i = 0; i < 28; i += 2) {
|
||
sum += (buf[i] << 8) + buf[i + 1];
|
||
}
|
||
|
||
return sum == buf_sum;
|
||
}
|
||
|
||
// verifies if Controller Pak holds valid header data
|
||
void validateMPK() {
|
||
byte writeErrors = 0;
|
||
boolean failed = false;
|
||
SdFile mpk_file;
|
||
byte buf[256];
|
||
|
||
//open file on sd card
|
||
if (!mpk_file.open(fileName, O_READ)) {
|
||
print_FatalError(open_file_STR);
|
||
}
|
||
|
||
// Read first 256 byte which contains the header including checksum and reverse checksum and three copies of it
|
||
mpk_file.read(buf, sizeof(buf));
|
||
|
||
//Check all four header copies
|
||
writeErrors = 0;
|
||
if (!checkHeader(&buf[0x20]))
|
||
writeErrors++;
|
||
if (!checkHeader(&buf[0x60]))
|
||
writeErrors++;
|
||
if (!checkHeader(&buf[0x80]))
|
||
writeErrors++;
|
||
if (!checkHeader(&buf[0xC0]))
|
||
writeErrors++;
|
||
if (writeErrors)
|
||
failed = true;
|
||
|
||
print_Msg(F("HDR: "));
|
||
print_Msg(4 - writeErrors);
|
||
print_Msg(F("/4 - "));
|
||
display_Update();
|
||
|
||
// Check both TOC copies
|
||
writeErrors = 0;
|
||
|
||
// Read 2nd and 3rd 256 byte page with TOC info
|
||
for (word currSdBuffer = 0x100; currSdBuffer < 0x300; currSdBuffer += 256) {
|
||
byte sum = 0;
|
||
|
||
// Read 256 bytes into SD buffer
|
||
mpk_file.read(buf, sizeof(buf));
|
||
|
||
// Calculate TOC checksum
|
||
for (byte i = 5; i < 128; i++) {
|
||
sum += buf[(i << 1) + 1];
|
||
}
|
||
if (buf[1] != sum)
|
||
writeErrors++;
|
||
}
|
||
if (writeErrors)
|
||
failed = true;
|
||
print_Msg(F("ToC: "));
|
||
print_Msg(2 - writeErrors);
|
||
println_Msg(F("/2"));
|
||
|
||
print_Msg(F("Consistency check "));
|
||
if (failed) {
|
||
errorLvl = 1;
|
||
print_Msg(F("failed"));
|
||
} else {
|
||
errorLvl = 0;
|
||
print_Msg(F("passed"));
|
||
}
|
||
display_Update();
|
||
|
||
// Close the file:
|
||
mpk_file.close();
|
||
}
|
||
|
||
void writeMPK() {
|
||
// 3 command bytes, 32 data bytes
|
||
byte command[3 + 32];
|
||
command[0] = 0x03;
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
print_Msg(F("Writing "));
|
||
print_Msg(filePath);
|
||
println_Msg(F("..."));
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
|
||
//Initialize progress bar
|
||
uint32_t totalProgressBar = 0x7FFF;
|
||
draw_progressbar(0, totalProgressBar);
|
||
|
||
for (word address = 0x0000; address < 0x8000; address += 32) {
|
||
myFile.read(command + 3, sizeof(command) - 3);
|
||
|
||
word address_with_crc = addrCRC(address);
|
||
command[1] = (byte)(address_with_crc >> 8);
|
||
command[2] = (byte)(address_with_crc & 0xff);
|
||
|
||
// don't want interrupts getting in the way
|
||
noInterrupts();
|
||
sendJoyBus(command, sizeof(command));
|
||
// Enable interrupts
|
||
interrupts();
|
||
|
||
// Real N64 has about 627us pause between banks, add a bit extra delay
|
||
delayMicroseconds(650);
|
||
|
||
if ((address & 0x1FF) == 0) {
|
||
// Blink led
|
||
// Update progress bar
|
||
blinkLED();
|
||
draw_progressbar(address, totalProgressBar);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
} else {
|
||
print_FatalError(open_file_STR);
|
||
}
|
||
}
|
||
|
||
// verifies if write was successful
|
||
void verifyMPK() {
|
||
byte block[32];
|
||
writeErrors = 0;
|
||
|
||
print_STR(verifying_STR, 1);
|
||
display_Update();
|
||
|
||
//open file on sd card
|
||
if (!myFile.open(filePath, O_READ)) {
|
||
print_FatalError(open_file_STR);
|
||
}
|
||
|
||
//Initialize progress bar
|
||
uint32_t processedProgressBar = 0;
|
||
uint32_t totalProgressBar = (uint32_t)(0x7FFF);
|
||
draw_progressbar(0, totalProgressBar);
|
||
|
||
// Controller paks, which all have 32kB of space, are mapped between 0x0000 – 0x7FFF
|
||
for (word currSdBuffer = 0x0000; currSdBuffer < 0x8000; currSdBuffer += sizeof(sdBuffer)) {
|
||
// Read 512 bytes into SD buffer
|
||
myFile.read(sdBuffer, sizeof(sdBuffer));
|
||
|
||
// Compare 32 byte block
|
||
for (word currBlock = 0; currBlock < sizeof(sdBuffer); currBlock += 32) {
|
||
// Read one block of the Controller Pak
|
||
readBlock(block, currSdBuffer + currBlock);
|
||
|
||
// Check against file on SD card
|
||
for (byte currByte = 0; currByte < 32; currByte++) {
|
||
if (sdBuffer[currBlock + currByte] != block[currByte]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
// Real N64 has about 627us pause between banks, add a bit extra delay
|
||
if (currBlock < 479)
|
||
delayMicroseconds(1500);
|
||
}
|
||
|
||
// Blink led
|
||
blinkLED();
|
||
// Update progress bar
|
||
processedProgressBar += 512;
|
||
draw_progressbar(processedProgressBar, totalProgressBar);
|
||
}
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("Written successfully"));
|
||
display_Update();
|
||
} else {
|
||
print_STR(error_STR, 0);
|
||
print_Msg(writeErrors);
|
||
print_STR(_bytes_STR, 1);
|
||
print_Error(did_not_verify_STR);
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
N64 Cartridge functions
|
||
*****************************************/
|
||
void printCartInfo_N64() {
|
||
// Check cart
|
||
getCartInfo_N64();
|
||
|
||
// Print start page
|
||
if (cartSize != 0) {
|
||
display_Clear();
|
||
print_Msg(F("Title: "));
|
||
println_Msg(romName);
|
||
print_Msg(F("Serial: "));
|
||
println_Msg(cartID);
|
||
print_Msg(F("Revision: "));
|
||
println_Msg(romVersion);
|
||
print_Msg(F("ROM Size: "));
|
||
print_Msg(cartSize);
|
||
println_Msg(F(" MB"));
|
||
print_Msg(F("Save Type: "));
|
||
switch (saveType) {
|
||
case 1:
|
||
println_Msg(F("SRAM"));
|
||
break;
|
||
case 4:
|
||
println_Msg(F("FLASH"));
|
||
break;
|
||
case 5:
|
||
println_Msg(F("4K EEPROM"));
|
||
eepPages = 64;
|
||
break;
|
||
case 6:
|
||
println_Msg(F("16K EEPROM"));
|
||
eepPages = 256;
|
||
break;
|
||
default:
|
||
println_Msg(F("None/Unknown"));
|
||
break;
|
||
}
|
||
|
||
print_Msg(F("CRC1: "));
|
||
println_Msg(checksumStr);
|
||
|
||
// Wait for user input
|
||
println_Msg(F(" "));
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
} else {
|
||
// Display error
|
||
display_Clear();
|
||
println_Msg(F("GAMEPAK ERROR"));
|
||
println_Msg("");
|
||
print_Msg(F("Title: "));
|
||
println_Msg(romName);
|
||
print_Msg(F("Serial: "));
|
||
println_Msg(cartID);
|
||
print_Msg(F("CRC1: "));
|
||
println_Msg(checksumStr);
|
||
display_Update();
|
||
|
||
strcpy(romName, "GPERROR");
|
||
print_Error(F("Cartridge unknown"));
|
||
println_Msg("");
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
|
||
// Set cartsize manually
|
||
unsigned char N64RomMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(romOptionsN64, 7);
|
||
N64RomMenu = question_box(F("Select ROM size"), menuOptions, 7, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (N64RomMenu) {
|
||
case 0:
|
||
// 4MB
|
||
cartSize = 4;
|
||
break;
|
||
|
||
case 1:
|
||
// 8MB
|
||
cartSize = 8;
|
||
break;
|
||
|
||
case 2:
|
||
// 12MB
|
||
cartSize = 12;
|
||
break;
|
||
|
||
case 3:
|
||
// 16MB
|
||
cartSize = 16;
|
||
break;
|
||
|
||
case 4:
|
||
// 32MB
|
||
cartSize = 32;
|
||
break;
|
||
|
||
case 5:
|
||
// 64MB
|
||
cartSize = 64;
|
||
break;
|
||
|
||
case 6:
|
||
// 128MB
|
||
cartSize = 128;
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
|
||
/* look-up the calculated crc in the file n64.txt on sd card
|
||
boolean searchCRC(char crcStr[9]) {
|
||
boolean result = 0;
|
||
char tempStr2[2];
|
||
char tempStr1[9];
|
||
char tempStr[5];
|
||
|
||
// Change to root dir
|
||
sd.chdir("/");
|
||
|
||
if (myFile.open("n64.txt", O_READ)) {
|
||
// Loop through file
|
||
while (myFile.available()) {
|
||
// Read 8 bytes into String, do it one at a time so byte order doesn't get mixed up
|
||
sprintf(tempStr1, "%c", myFile.read());
|
||
for (byte i = 0; i < 7; i++) {
|
||
sprintf(tempStr2, "%c", myFile.read());
|
||
strcat(tempStr1, tempStr2);
|
||
}
|
||
|
||
// Check if string is a match
|
||
if (strcasecmp(tempStr1, crcStr) == 0) {
|
||
// Skip the , in the file
|
||
myFile.seekCur(1);
|
||
|
||
// Read 4 bytes into String, do it one at a time so byte order doesn't get mixed up
|
||
sprintf(tempStr, "%c", myFile.read());
|
||
for (byte i = 0; i < 3; i++) {
|
||
sprintf(tempStr2, "%c", myFile.read());
|
||
strcat(tempStr, tempStr2);
|
||
}
|
||
|
||
if (strcmp(tempStr, cartID) == 0) {
|
||
result = 1;
|
||
break;
|
||
}
|
||
else {
|
||
result = 0;
|
||
break;
|
||
}
|
||
}
|
||
// If no match, empty string, advance by 12 and try again
|
||
else {
|
||
myFile.seekCur(12);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
return result;
|
||
}
|
||
else {
|
||
print_FatalError(F("n64.txt missing"));
|
||
}
|
||
}*/
|
||
|
||
// look-up cart id in file n64.txt on sd card
|
||
void getCartInfo_N64() {
|
||
char tempStr[9];
|
||
int read_bytes;
|
||
|
||
// cart not in list
|
||
cartSize = 0;
|
||
saveType = 0;
|
||
|
||
// Read cart id
|
||
idCart();
|
||
|
||
display_Clear();
|
||
println_Msg(F("Searching database..."));
|
||
display_Update();
|
||
|
||
if (myFile.open("n64.txt", O_READ)) {
|
||
// Loop through file
|
||
while (myFile.available()) {
|
||
// Skip first line with name
|
||
skip_line(&myFile);
|
||
|
||
// Skip over the CRC32 checksum
|
||
myFile.seekCur(9);
|
||
|
||
// Read 8 bytes into String
|
||
read_bytes = myFile.read(tempStr, 8);
|
||
tempStr[read_bytes == -1 ? 0 : read_bytes] = 0;
|
||
|
||
// Check if string is a match
|
||
if (strcmp(tempStr, checksumStr) == 0) {
|
||
// Skip the , in the file
|
||
myFile.seekCur(1);
|
||
|
||
read_bytes = myFile.read(tempStr, 2);
|
||
tempStr[read_bytes == -1 ? 0 : read_bytes] = 0;
|
||
cartSize = atoi(tempStr);
|
||
|
||
// Skip the , in the file
|
||
myFile.seekCur(1);
|
||
|
||
// Read the next ascii character and subtract 48 to convert to decimal
|
||
saveType = myFile.read() - 48;
|
||
|
||
// End loop
|
||
break;
|
||
}
|
||
// If no match skip to next entry
|
||
else {
|
||
// skip rest of line
|
||
myFile.seekCur(7);
|
||
// skip third empty line
|
||
skip_line(&myFile);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
} else {
|
||
print_FatalError(F("n64.txt missing"));
|
||
}
|
||
}
|
||
|
||
// Read rom ID
|
||
void idCart() {
|
||
// Set the address
|
||
setAddress_N64(romBase);
|
||
// Read first 64 bytes of rom
|
||
for (int c = 0; c < 64; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
|
||
// CRC1
|
||
sprintf(checksumStr, "%02X%02X%02X%02X", sdBuffer[0x10], sdBuffer[0x11], sdBuffer[0x12], sdBuffer[0x13]);
|
||
|
||
// Get cart id
|
||
cartID[0] = sdBuffer[0x3B];
|
||
cartID[1] = sdBuffer[0x3C];
|
||
cartID[2] = sdBuffer[0x3D];
|
||
cartID[3] = sdBuffer[0x3E];
|
||
|
||
// Get rom version
|
||
romVersion = sdBuffer[0x3F];
|
||
|
||
// If name consists out of all japanese characters use cart id
|
||
if (buildRomName(romName, &sdBuffer[0x20], 20) == 0) {
|
||
strcpy(romName, cartID);
|
||
}
|
||
|
||
#ifdef savesummarytotxt
|
||
// Get CRC1
|
||
for (int i = 0; i < 4; i++) {
|
||
if (sdBuffer[0x10 + i] < 0x10) {
|
||
CRC1 += '0';
|
||
}
|
||
CRC1 += String(sdBuffer[0x10 + i], HEX);
|
||
}
|
||
|
||
// Get CRC2
|
||
for (int i = 0; i < 4; i++) {
|
||
if (sdBuffer[0x14 + i] < 0x10) {
|
||
CRC2 += '0';
|
||
}
|
||
CRC2 += String(sdBuffer[0x14 + i], HEX);
|
||
}
|
||
#endif
|
||
}
|
||
|
||
// Write Eeprom to cartridge
|
||
void writeEeprom() {
|
||
if ((saveType == 5) || (saveType == 6)) {
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
println_Msg(F("Writing..."));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
// 2 command bytes and 8 data bytes
|
||
byte command[2 + 8];
|
||
command[0] = 0x05;
|
||
|
||
// Note: eepPages can be 256, so page must be able to get to 256 for the
|
||
// loop to exit. So it is not possible to use command[1] directly as loop
|
||
// counter.
|
||
for (int page = 0; page < eepPages; page++) {
|
||
command[1] = page;
|
||
// TODO: read 512 bytes in a 512 + 2 bytes buffer, and move the command start 32 bytes at a time
|
||
myFile.read(command + 2, sizeof(command) - 2);
|
||
// Disable interrupts for more uniform clock pulses
|
||
|
||
// Blink led
|
||
blinkLED();
|
||
if (page)
|
||
delay(50); // Wait 50ms between pages when writing
|
||
|
||
noInterrupts();
|
||
sendJoyBus(command, sizeof(command));
|
||
interrupts();
|
||
}
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
print_STR(done_STR, 1);
|
||
display_Update();
|
||
delay(600);
|
||
} else {
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
}
|
||
}
|
||
|
||
void readEepromPageList(byte* output, byte page_number, byte page_count) {
|
||
byte command[] = { 0x04, page_number };
|
||
|
||
// Disable interrupts for more uniform clock pulses
|
||
while (page_count--) {
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
noInterrupts();
|
||
sendJoyBus(command, sizeof(command));
|
||
// XXX: is it possible to read more than 8 bytes at a time ?
|
||
recvJoyBus(output, 8);
|
||
interrupts();
|
||
|
||
if (page_count)
|
||
delayMicroseconds(600); // wait 600us between pages when reading
|
||
|
||
command[1]++;
|
||
output += 8;
|
||
}
|
||
}
|
||
|
||
// Dump Eeprom to SD
|
||
void readEeprom() {
|
||
if ((saveType == 5) || (saveType == 6)) {
|
||
// Get name, add extension and convert to char array for sd lib
|
||
snprintf_P(fileName, sizeof(fileName), N64_EEP_FILENAME_FMT, romName);
|
||
|
||
// create a new folder for the save file
|
||
EEPROM_readAnything(0, foldern);
|
||
snprintf_P(folder, sizeof(folder), N64_SAVE_DIRNAME_FMT, romName, foldern);
|
||
sd.mkdir(folder, true);
|
||
sd.chdir(folder);
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(0, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_FatalError(create_file_STR);
|
||
}
|
||
|
||
for (int i = 0; i < eepPages; i += sizeof(sdBuffer) / 8) {
|
||
readEepromPageList(sdBuffer, i, sizeof(sdBuffer) / 8);
|
||
// Write 64 pages at once to the SD card
|
||
myFile.write(sdBuffer, sizeof(sdBuffer));
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
//clear the screen
|
||
display_Clear();
|
||
print_Msg(F("Saved to "));
|
||
print_Msg(folder);
|
||
println_Msg(F("/"));
|
||
display_Update();
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
}
|
||
}
|
||
|
||
// Check if a write succeeded, returns 0 if all is ok and number of errors if not
|
||
unsigned long verifyEeprom() {
|
||
unsigned long writeErrors;
|
||
|
||
if ((saveType == 5) || (saveType == 6)) {
|
||
writeErrors = 0;
|
||
|
||
display_Clear();
|
||
print_Msg(F("Verifying against "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
for (int i = 0; i < eepPages; i += sizeof(sdBuffer) / 8) {
|
||
readEepromPageList(sdBuffer, i, sizeof(sdBuffer) / 8);
|
||
// Check sdBuffer content against file on sd card
|
||
for (size_t c = 0; c < sizeof(sdBuffer); c++) {
|
||
if (myFile.read() != sdBuffer[c]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
} else {
|
||
// SD Error
|
||
writeErrors = 999999;
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
// Return 0 if verified ok, or number of errors
|
||
return writeErrors;
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
SRAM functions
|
||
*****************************************/
|
||
// Write sram to cartridge
|
||
void writeSram(unsigned long sramSize) {
|
||
if (saveType == 1) {
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
println_Msg(F("Writing..."));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + sramSize); currByte += 512) {
|
||
|
||
// Read save from SD into buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Set the address for the next 512 bytes
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
// Join bytes to word
|
||
word myWord = ((sdBuffer[c] & 0xFF) << 8) | (sdBuffer[c + 1] & 0xFF);
|
||
|
||
// Write word
|
||
writeWord_N64(myWord);
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
print_STR(done_STR, 1);
|
||
display_Update();
|
||
} else {
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
}
|
||
}
|
||
|
||
// Read sram and save to the SD card
|
||
void readSram(unsigned long sramSize, byte flashramType) {
|
||
int offset = 512;
|
||
int bufferSize = 512;
|
||
if (flashramType == 2) {
|
||
offset = 64;
|
||
bufferSize = 128;
|
||
}
|
||
|
||
// Get name, add extension and convert to char array for sd lib
|
||
strcpy(fileName, romName);
|
||
|
||
if (saveType == 4) {
|
||
strcat(fileName, ".fla");
|
||
} else if (saveType == 1) {
|
||
strcat(fileName, ".sra");
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
}
|
||
|
||
// create a new folder for the save file
|
||
EEPROM_readAnything(0, foldern);
|
||
sprintf(folder, "N64/SAVE/%s/%d", romName, foldern);
|
||
sd.mkdir(folder, true);
|
||
sd.chdir(folder);
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(0, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
|
||
// Set the address
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < bufferSize; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
myFile.write(sdBuffer, bufferSize);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
print_Msg(F("Saved to "));
|
||
print_Msg(folder);
|
||
println_Msg(F("/"));
|
||
display_Update();
|
||
}
|
||
|
||
unsigned long verifySram(unsigned long sramSize, byte flashramType) {
|
||
writeErrors = 0;
|
||
|
||
int offset = 512;
|
||
int bufferSize = 512;
|
||
if (flashramType == 2) {
|
||
offset = 64;
|
||
bufferSize = 128;
|
||
}
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + (sramSize / flashramType)); currByte += offset) {
|
||
// Set the address
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < bufferSize; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
// Check sdBuffer content against file on sd card
|
||
for (int i = 0; i < bufferSize; i++) {
|
||
if (myFile.read() != sdBuffer[i]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
} else {
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
// Return 0 if verified ok, or number of errors
|
||
return writeErrors;
|
||
}
|
||
|
||
/******************************************
|
||
Flashram functions
|
||
*****************************************/
|
||
// Send a command to the flashram command register
|
||
void sendFramCmd(unsigned long myCommand) {
|
||
// Split command into two words
|
||
word myComLowOut = myCommand & 0xFFFF;
|
||
word myComHighOut = myCommand >> 16;
|
||
|
||
// Set address to command register
|
||
setAddress_N64(0x08010000);
|
||
// Send command
|
||
writeWord_N64(myComHighOut);
|
||
writeWord_N64(myComLowOut);
|
||
}
|
||
|
||
// Init fram
|
||
void initFram() {
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
delay(10);
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
delay(10);
|
||
//FRAM_STATUS_MODE_CMD
|
||
sendFramCmd(0xE1000000);
|
||
delay(10);
|
||
}
|
||
|
||
void writeFram(byte flashramType) {
|
||
if (saveType == 4) {
|
||
// Erase fram
|
||
eraseFram();
|
||
|
||
// Check if empty
|
||
if (blankcheck_N64(flashramType) == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
} else {
|
||
println_Msg(F("FAIL"));
|
||
display_Update();
|
||
}
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
print_Msg(F("Writing "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
// Init fram
|
||
initFram();
|
||
|
||
// Write all 8 fram banks
|
||
print_Msg(F("Bank "));
|
||
for (byte bank = 0; bank < 8; bank++) {
|
||
print_Msg(bank);
|
||
print_Msg(F(" "));
|
||
display_Update();
|
||
|
||
// Write one bank of 128*128 bytes
|
||
for (byte offset = 0; offset < 128; offset++) {
|
||
// Read save from SD into buffer
|
||
myFile.read(sdBuffer, 128);
|
||
|
||
// FRAM_WRITE_MODE_CMD
|
||
sendFramCmd(0xB4000000);
|
||
delay(1);
|
||
|
||
// Set the address for the next 128 bytes
|
||
setAddress_N64(0x08000000);
|
||
|
||
// Send 128 bytes, 64 words
|
||
for (byte c = 0; c < 128; c += 2) {
|
||
// Join two bytes into one word
|
||
word myWord = ((sdBuffer[c] & 0xFF) << 8) | (sdBuffer[c + 1] & 0xFF);
|
||
// Write word
|
||
writeWord_N64(myWord);
|
||
}
|
||
// Delay between each "DMA"
|
||
delay(1);
|
||
|
||
//FRAM_WRITE_OFFSET_CMD + offset
|
||
sendFramCmd((0xA5000000 | (((bank * 128) + offset) & 0xFFFF)));
|
||
delay(1);
|
||
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
while (waitForFram(flashramType)) {
|
||
delay(1);
|
||
}
|
||
}
|
||
// Delay between banks
|
||
delay(20);
|
||
}
|
||
println_Msg("");
|
||
// Close the file:
|
||
myFile.close();
|
||
} else {
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
}
|
||
}
|
||
|
||
// Delete all 8 flashram banks
|
||
void eraseFram() {
|
||
if (saveType == 4) {
|
||
print_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
// Init fram
|
||
initFram();
|
||
|
||
// Erase fram
|
||
// 0x4B00007F 0x4B0000FF 0x4B00017F 0x4B0001FF 0x4B00027F 0x4B0002FF 0x4B00037F 0x4B0003FF
|
||
for (unsigned long bank = 0x4B00007F; bank < 0x4B00047F; bank += 0x80) {
|
||
sendFramCmd(bank);
|
||
delay(10);
|
||
// FRAM_ERASE_MODE_CMD
|
||
sendFramCmd(0x78000000);
|
||
delay(10);
|
||
// FRAM_EXECUTE_CMD
|
||
sendFramCmd(0xD2000000);
|
||
while (waitForFram(flashramType)) {
|
||
delay(1);
|
||
}
|
||
}
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
}
|
||
}
|
||
|
||
// Read flashram
|
||
void readFram(byte flashramType) {
|
||
if (saveType == 4) {
|
||
// Put flashram into read mode
|
||
// FRAM_READ_MODE_CMD
|
||
sendFramCmd(0xF0000000);
|
||
// Read Flashram
|
||
readSram(131072, flashramType);
|
||
} else {
|
||
print_FatalError(F("Savetype Error"));
|
||
}
|
||
}
|
||
|
||
// Verify flashram
|
||
unsigned long verifyFram(byte flashramType) {
|
||
// Put flashram into read mode
|
||
// FRAM_READ_MODE_CMD
|
||
sendFramCmd(0xF0000000);
|
||
writeErrors = verifySram(131072, flashramType);
|
||
return writeErrors;
|
||
}
|
||
|
||
// Blankcheck flashram
|
||
unsigned long blankcheck_N64(byte flashramType) {
|
||
writeErrors = 0;
|
||
|
||
int offset = 512;
|
||
int bufferSize = 512;
|
||
if (flashramType == 2) {
|
||
offset = 64;
|
||
bufferSize = 128;
|
||
}
|
||
|
||
// Put flashram into read mode
|
||
// FRAM_READ_MODE_CMD
|
||
sendFramCmd(0xF0000000);
|
||
|
||
// Read Flashram
|
||
for (unsigned long currByte = sramBase; currByte < (sramBase + (131072 / flashramType)); currByte += offset) {
|
||
// Set the address for the next 512 bytes
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < bufferSize; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
// Check sdBuffer content against file on sd card
|
||
for (int i = 0; i < bufferSize; i++) {
|
||
if (0xFF != sdBuffer[i]) {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
// Return 0 if verified ok, or number of errors
|
||
return writeErrors;
|
||
}
|
||
|
||
// Wait until current operation is done
|
||
byte waitForFram(byte flashramType) {
|
||
byte framStatus = 0;
|
||
byte statusMXL1100[] = { 0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1E };
|
||
byte statusMXL1101[] = { 0x11, 0x11, 0x80, 0x01, 0x00, 0xC2, 0x00, 0x1D };
|
||
byte statusMN63F81[] = { 0x11, 0x11, 0x80, 0x01, 0x00, 0x32, 0x00, 0xF1 };
|
||
|
||
// FRAM_STATUS_MODE_CMD
|
||
sendFramCmd(0xE1000000);
|
||
delay(1);
|
||
|
||
// Set address to Fram status register
|
||
setAddress_N64(0x08000000);
|
||
|
||
// Read Status
|
||
for (byte c = 0; c < 8; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
|
||
if (flashramType == 2) {
|
||
for (byte c = 0; c < 8; c++) {
|
||
if (statusMXL1100[c] != sdBuffer[c]) {
|
||
framStatus = 1;
|
||
}
|
||
}
|
||
} else if (flashramType == 1) {
|
||
//MX29L1101
|
||
if (MN63F81MPN == false) {
|
||
for (byte c = 0; c < 8; c++) {
|
||
if (statusMXL1101[c] != sdBuffer[c]) {
|
||
framStatus = 1;
|
||
}
|
||
}
|
||
}
|
||
//MN63F81MPN
|
||
else if (MN63F81MPN == true) {
|
||
for (byte c = 0; c < 8; c++) {
|
||
if (statusMN63F81[c] != sdBuffer[c]) {
|
||
framStatus = 1;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
return framStatus;
|
||
}
|
||
|
||
// Get flashram type
|
||
void getFramType() {
|
||
|
||
// FRAM_STATUS_MODE_CMD
|
||
sendFramCmd(0xE1000000);
|
||
delay(10);
|
||
|
||
// Set address to Fram status register
|
||
setAddress_N64(0x08000000);
|
||
|
||
// Read Status
|
||
for (byte c = 0; c < 8; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
//MX29L1100
|
||
if (sdBuffer[7] == 0x1e) {
|
||
flashramType = 2;
|
||
println_Msg(F("Type: MX29L1100"));
|
||
display_Update();
|
||
}
|
||
//MX29L1101
|
||
else if (sdBuffer[7] == 0x1d) {
|
||
flashramType = 1;
|
||
MN63F81MPN = false;
|
||
println_Msg(F("Type: MX29L1101"));
|
||
display_Update();
|
||
}
|
||
//MN63F81MPN
|
||
else if (sdBuffer[7] == 0xf1) {
|
||
flashramType = 1;
|
||
MN63F81MPN = true;
|
||
println_Msg(F("Type: MN63F81MPN"));
|
||
display_Update();
|
||
}
|
||
// 29L1100KC-15B0 compat MX29L1101
|
||
else if ((sdBuffer[7] == 0x8e) || (sdBuffer[7] == 0x84)) {
|
||
flashramType = 1;
|
||
MN63F81MPN = false;
|
||
println_Msg(F("Type: 29L1100KC-15B0"));
|
||
println_Msg(F("(compat. MX29L1101)"));
|
||
display_Update();
|
||
}
|
||
// Type unknown
|
||
else {
|
||
for (byte c = 0; c < 8; c++) {
|
||
print_Msg(sdBuffer[c], HEX);
|
||
print_Msg(F(", "));
|
||
}
|
||
print_FatalError(F("Flashram unknown"));
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
Rom functions
|
||
*****************************************/
|
||
// Read rom and save to the SD card
|
||
#ifndef fastcrc
|
||
// dumping rom slow
|
||
void readRom_N64() {
|
||
// Get name, add extension and convert to char array for sd lib
|
||
strcpy(fileName, romName);
|
||
strcat(fileName, ".Z64");
|
||
|
||
// create a new folder
|
||
EEPROM_readAnything(0, foldern);
|
||
sprintf(folder, "N64/ROM/%s/%d", romName, foldern);
|
||
sd.mkdir(folder, true);
|
||
sd.chdir(folder);
|
||
|
||
// clear the screen
|
||
// display_Clear();
|
||
print_STR(saving_to_STR, 0);
|
||
print_Msg(folder);
|
||
println_Msg(F("/..."));
|
||
display_Update();
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(0, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_FatalError(create_file_STR);
|
||
}
|
||
|
||
//Initialize progress bar
|
||
uint32_t processedProgressBar = 0;
|
||
uint32_t totalProgressBar = (uint32_t)(cartSize)*1024 * 1024;
|
||
draw_progressbar(0, totalProgressBar);
|
||
|
||
for (unsigned long currByte = romBase; currByte < (romBase + (cartSize * 1024 * 1024)); currByte += 512) {
|
||
// Blink led
|
||
if ((currByte & 0x3FFF) == 0)
|
||
blinkLED();
|
||
|
||
// Set the address for the next 512 bytes
|
||
setAddress_N64(currByte);
|
||
|
||
for (word c = 0; c < 512; c += 2) {
|
||
word myWord = readWord_N64();
|
||
sdBuffer[c] = myWord >> 8;
|
||
sdBuffer[c + 1] = myWord & 0xFF;
|
||
}
|
||
myFile.write(sdBuffer, 512);
|
||
|
||
processedProgressBar += 512;
|
||
draw_progressbar(processedProgressBar, totalProgressBar);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
#else
|
||
// dumping rom fast
|
||
uint32_t readRom_N64() {
|
||
// Get name, add extension and convert to char array for sd lib
|
||
strcpy(fileName, romName);
|
||
strcat(fileName, ".Z64");
|
||
|
||
// create a new folder
|
||
EEPROM_readAnything(0, foldern);
|
||
sprintf(folder, "N64/ROM/%s/%d", romName, foldern);
|
||
sd.mkdir(folder, true);
|
||
sd.chdir(folder);
|
||
|
||
// clear the screen
|
||
// display_Clear();
|
||
print_STR(saving_to_STR, 0);
|
||
print_Msg(folder);
|
||
println_Msg(F("/..."));
|
||
display_Update();
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(0, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_FatalError(create_file_STR);
|
||
}
|
||
|
||
byte buffer[1024];
|
||
|
||
//Initialize progress bar
|
||
uint32_t processedProgressBar = 0;
|
||
uint32_t totalProgressBar = (uint32_t)(cartSize)*1024 * 1024;
|
||
draw_progressbar(0, totalProgressBar);
|
||
|
||
// prepare crc32
|
||
uint32_t oldcrc32 = 0xFFFFFFFF;
|
||
|
||
// run combined dumper + crc32 routine for better performance, as N64 ROMs are quite large for an 8bit micro
|
||
// currently dumps + checksums a 32MB cart in 170 seconds (down from 347 seconds)
|
||
for (unsigned long currByte = romBase; currByte < (romBase + (cartSize * 1024 * 1024)); currByte += 1024) {
|
||
// Blink led
|
||
if (currByte % 16384 == 0)
|
||
blinkLED();
|
||
|
||
// Set the address for the first 512 bytes to dump
|
||
setAddress_N64(currByte);
|
||
// Wait 62.5ns (safety)
|
||
NOP;
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
// Pull read(PH6) low
|
||
PORTH &= ~(1 << 6);
|
||
// Wait ~310ns
|
||
NOP;
|
||
NOP;
|
||
NOP;
|
||
NOP;
|
||
NOP;
|
||
|
||
// data on PINK and PINF is valid now, read into sd card buffer
|
||
buffer[c] = PINK; // hiByte
|
||
buffer[c + 1] = PINF; // loByte
|
||
|
||
// Pull read(PH6) high
|
||
PORTH |= (1 << 6);
|
||
|
||
// crc32 update
|
||
UPDATE_CRC(oldcrc32, buffer[c]);
|
||
UPDATE_CRC(oldcrc32, buffer[c + 1]);
|
||
}
|
||
|
||
// Set the address for the next 512 bytes to dump
|
||
setAddress_N64(currByte + 512);
|
||
// Wait 62.5ns (safety)
|
||
NOP;
|
||
|
||
for (int c = 512; c < 1024; c += 2) {
|
||
// Pull read(PH6) low
|
||
PORTH &= ~(1 << 6);
|
||
// Wait ~310ns
|
||
NOP;
|
||
NOP;
|
||
NOP;
|
||
NOP;
|
||
NOP;
|
||
|
||
// data on PINK and PINF is valid now, read into sd card buffer
|
||
buffer[c] = PINK; // hiByte
|
||
buffer[c + 1] = PINF; // loByte
|
||
|
||
// Pull read(PH6) high
|
||
PORTH |= (1 << 6);
|
||
|
||
// crc32 update
|
||
UPDATE_CRC(oldcrc32, buffer[c]);
|
||
UPDATE_CRC(oldcrc32, buffer[c + 1]);
|
||
}
|
||
|
||
processedProgressBar += 1024;
|
||
draw_progressbar(processedProgressBar, totalProgressBar);
|
||
// write out 1024 bytes to file
|
||
myFile.write(buffer, 1024);
|
||
}
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
|
||
// Return checksum
|
||
return oldcrc32;
|
||
}
|
||
#endif
|
||
|
||
#ifdef savesummarytotxt
|
||
// Save an info.txt with information on the dumped rom to the SD card
|
||
void savesummary_N64(boolean checkfound, char crcStr[9], unsigned long timeElapsed) {
|
||
// Open file on sd card
|
||
if (!myFile.open("N64/ROM/n64log.txt", O_RDWR | O_CREAT | O_APPEND)) {
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
|
||
//Write the info
|
||
myFile.print(F("Name\t: "));
|
||
myFile.println(romName);
|
||
|
||
myFile.print(F("ID\t: "));
|
||
myFile.println(cartID);
|
||
|
||
myFile.print(F("ROM CRC1: "));
|
||
myFile.println(CRC1);
|
||
|
||
myFile.print(F("ROM CRC2: "));
|
||
myFile.println(CRC2);
|
||
|
||
myFile.print(F("Size\t: "));
|
||
myFile.print(cartSize);
|
||
|
||
myFile.println(F(" MB"));
|
||
myFile.print(F("Save\t: "));
|
||
|
||
switch (saveType) {
|
||
case 1:
|
||
myFile.println(F("SRAM"));
|
||
break;
|
||
case 4:
|
||
myFile.println(F("FLASH"));
|
||
break;
|
||
case 5:
|
||
myFile.println(F("4K EEPROM"));
|
||
break;
|
||
case 6:
|
||
myFile.println(F("16K EEPROM"));
|
||
break;
|
||
default:
|
||
myFile.println(F("None/Unknown"));
|
||
break;
|
||
}
|
||
|
||
myFile.print(F("Version\t: 1."));
|
||
myFile.println(romVersion);
|
||
|
||
myFile.print(F("Saved To: "));
|
||
myFile.println(folder);
|
||
|
||
#ifdef RTC_installed
|
||
myFile.print(F("Dumped\t: "));
|
||
myFile.println(RTCStamp());
|
||
#endif
|
||
|
||
myFile.print(F("CRC\t: "));
|
||
myFile.print(crcStr);
|
||
|
||
if (checkfound) {
|
||
// Dump was a known good rom
|
||
// myFile.println(F("Checksum matches"));
|
||
myFile.println(" [Match]");
|
||
} else {
|
||
// myFile.println(F("Checksum not found"));
|
||
myFile.println(" [No Match]");
|
||
}
|
||
|
||
myFile.print(F("Time\t: "));
|
||
myFile.println(timeElapsed);
|
||
|
||
myFile.println(F(" "));
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
#endif
|
||
|
||
/******************************************
|
||
N64 Repro Flashrom Functions
|
||
*****************************************/
|
||
void flashRepro_N64() {
|
||
unsigned long sectorSize = 0;
|
||
byte bufferSize = 0;
|
||
// Check flashrom ID's
|
||
idFlashrom_N64();
|
||
|
||
// If the ID is known continue
|
||
if (cartSize != 0) {
|
||
// Print flashrom name
|
||
if ((flashid == 0x227E) && (strcmp(cartID, "2201") == 0)) {
|
||
print_Msg(F("Spansion S29GL256N"));
|
||
if (cartSize == 64)
|
||
println_Msg(F(" x2"));
|
||
else
|
||
println_Msg("");
|
||
} else if ((flashid == 0x227E) && (strcmp(cartID, "2101") == 0)) {
|
||
print_Msg(F("Spansion S29GL128N"));
|
||
} else if ((flashid == 0x227E) && (strcmp(cartID, "2100") == 0)) {
|
||
print_Msg(F("ST M29W128GL"));
|
||
} else if ((flashid == 0x22C9) || (flashid == 0x22CB)) {
|
||
print_Msg(F("Macronix MX29LV640"));
|
||
if (cartSize == 16)
|
||
println_Msg(F(" x2"));
|
||
else
|
||
println_Msg("");
|
||
} else if (flashid == 0x8816)
|
||
println_Msg(F("Intel 4400L0ZDQ0"));
|
||
else if (flashid == 0x7E7E)
|
||
println_Msg(F("Fujitsu MSP55LV100S"));
|
||
else if ((flashid == 0x227E) && (strcmp(cartID, "2301") == 0))
|
||
println_Msg(F("Fujitsu MSP55LV512"));
|
||
else if ((flashid == 0x227E) && (strcmp(cartID, "3901") == 0))
|
||
println_Msg(F("Intel 512M29EW"));
|
||
|
||
// Print info
|
||
print_Msg(F("ID: "));
|
||
print_Msg(flashid_str);
|
||
print_Msg(F(" Size: "));
|
||
print_Msg(cartSize);
|
||
println_Msg(F("MB"));
|
||
println_Msg("");
|
||
println_Msg(F("This will erase your"));
|
||
println_Msg(F("Repro Cartridge."));
|
||
println_Msg(F("Attention: Use 3.3V!"));
|
||
println_Msg("");
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
} else {
|
||
println_Msg(F("Unknown flashrom"));
|
||
print_Msg(F("ID: "));
|
||
print_Msg(vendorID);
|
||
print_Msg(F(" "));
|
||
print_Msg(flashid_str);
|
||
print_Msg(F(" "));
|
||
println_Msg(cartID);
|
||
println_Msg(F(" "));
|
||
println_Msg(F("Press button for"));
|
||
println_Msg(F("manual config"));
|
||
println_Msg(F("This will erase your"));
|
||
println_Msg(F("Repro Cartridge."));
|
||
println_Msg(F("Attention: Use 3.3V!"));
|
||
display_Update();
|
||
wait();
|
||
|
||
// clear IDs
|
||
sprintf(vendorID, "%s", "CONF");
|
||
flashid = 0;
|
||
sprintf(flashid_str, "%s", "CONF");
|
||
sprintf(cartID, "%s", "CONF");
|
||
|
||
// Set cartsize manually
|
||
unsigned char N64RomMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(romOptionsN64, 7);
|
||
N64RomMenu = question_box(F("Select flash size"), menuOptions, 7, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (N64RomMenu) {
|
||
case 0:
|
||
// 4MB
|
||
cartSize = 4;
|
||
break;
|
||
|
||
case 1:
|
||
// 8MB
|
||
cartSize = 8;
|
||
break;
|
||
|
||
case 2:
|
||
// 12MB
|
||
cartSize = 12;
|
||
break;
|
||
|
||
case 3:
|
||
// 16MB
|
||
cartSize = 16;
|
||
break;
|
||
|
||
case 4:
|
||
// 32MB
|
||
cartSize = 32;
|
||
break;
|
||
|
||
case 5:
|
||
// 64MB
|
||
cartSize = 64;
|
||
break;
|
||
|
||
case 6:
|
||
// 128MB
|
||
cartSize = 128;
|
||
break;
|
||
}
|
||
|
||
// Set flash buffer manually
|
||
unsigned char N64BufferMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(bufferOptionsN64, 4);
|
||
N64BufferMenu = question_box(F("Select buffer size"), menuOptions, 4, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (N64BufferMenu) {
|
||
case 0:
|
||
// no buffer
|
||
bufferSize = 0;
|
||
break;
|
||
|
||
case 1:
|
||
// 32 byte buffer
|
||
bufferSize = 32;
|
||
break;
|
||
|
||
case 2:
|
||
// 64 byte buffer
|
||
bufferSize = 64;
|
||
break;
|
||
|
||
case 3:
|
||
// 128 byte buffer
|
||
bufferSize = 128;
|
||
break;
|
||
}
|
||
|
||
// Set sector size manually
|
||
unsigned char N64SectorMenu;
|
||
// Copy menuOptions out of progmem
|
||
convertPgm(sectorOptionsN64, 4);
|
||
N64SectorMenu = question_box(F("Select sector size"), menuOptions, 4, 0);
|
||
|
||
// wait for user choice to come back from the question box menu
|
||
switch (N64SectorMenu) {
|
||
case 0:
|
||
// 8KB sectors
|
||
sectorSize = 0x2000;
|
||
break;
|
||
|
||
case 1:
|
||
// 32KB sectors
|
||
sectorSize = 0x8000;
|
||
break;
|
||
|
||
case 2:
|
||
// 64KB sectors
|
||
sectorSize = 0x10000;
|
||
break;
|
||
|
||
case 3:
|
||
// 128KB sectors
|
||
sectorSize = 0x20000;
|
||
break;
|
||
}
|
||
}
|
||
|
||
// Launch file browser
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
fileBrowser(F("Select z64 file"));
|
||
display_Clear();
|
||
display_Update();
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
// Get rom size from file
|
||
fileSize = myFile.fileSize();
|
||
print_Msg(F("File size: "));
|
||
print_Msg(fileSize / 1048576);
|
||
println_Msg(F("MB"));
|
||
display_Update();
|
||
|
||
// Compare file size to flashrom size
|
||
if ((fileSize / 1048576) > cartSize) {
|
||
print_FatalError(file_too_big_STR);
|
||
}
|
||
|
||
// Erase needed sectors
|
||
if (flashid == 0x227E) {
|
||
// Spansion S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
|
||
eraseSector_N64(0x20000);
|
||
} else if (flashid == 0x7E7E) {
|
||
// Fujitsu MSP55LV100S
|
||
eraseMSP55LV100_N64();
|
||
} else if ((flashid == 0x8813) || (flashid == 0x8816)) {
|
||
// Intel 4400L0ZDQ0
|
||
eraseIntel4400_N64();
|
||
resetIntel4400_N64();
|
||
} else if ((flashid == 0x22C9) || (flashid == 0x22CB)) {
|
||
// Macronix MX29LV640, C9 is top boot and CB is bottom boot block
|
||
eraseSector_N64(0x8000);
|
||
} else {
|
||
eraseFlashrom_N64();
|
||
}
|
||
|
||
// Check if erase was successful
|
||
if (blankcheckFlashrom_N64()) {
|
||
// Write flashrom
|
||
println_Msg(F("OK"));
|
||
print_Msg(F("Writing "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
|
||
if ((strcmp(cartID, "3901") == 0) && (flashid == 0x227E)) {
|
||
// Intel 512M29EW(64MB) with 0x20000 sector size and 128 byte buffer
|
||
writeFlashBuffer_N64(0x20000, 128);
|
||
} else if ((strcmp(cartID, "2100") == 0) && (flashid == 0x227E)) {
|
||
// ST M29W128GH(16MB) with 0x20000 sector size and 64 byte buffer
|
||
writeFlashBuffer_N64(0x20000, 64);
|
||
} else if (flashid == 0x227E) {
|
||
// Spansion S29GL128N/S29GL256N or Fujitsu MSP55LV512 with 0x20000 sector size and 32 byte buffer
|
||
writeFlashBuffer_N64(0x20000, 32);
|
||
} else if (flashid == 0x7E7E) {
|
||
//Fujitsu MSP55LV100S
|
||
writeMSP55LV100_N64(0x20000);
|
||
} else if ((flashid == 0x22C9) || (flashid == 0x22CB)) {
|
||
// Macronix MX29LV640 without buffer and 0x8000 sector size
|
||
writeFlashrom_N64(0x8000);
|
||
} else if ((flashid == 0x8813) || (flashid == 0x8816)) {
|
||
// Intel 4400L0ZDQ0
|
||
writeIntel4400_N64();
|
||
resetIntel4400_N64();
|
||
} else if (sectorSize) {
|
||
if (bufferSize) {
|
||
writeFlashBuffer_N64(sectorSize, bufferSize);
|
||
} else {
|
||
writeFlashrom_N64(sectorSize);
|
||
}
|
||
} else {
|
||
print_FatalError(F("sectorSize not set"));
|
||
}
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
|
||
// Verify
|
||
print_STR(verifying_STR, 0);
|
||
display_Update();
|
||
writeErrors = verifyFlashrom_N64();
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("OK"));
|
||
display_Update();
|
||
} else {
|
||
print_Msg(writeErrors);
|
||
print_Msg(F(" bytes "));
|
||
print_Error(did_not_verify_STR);
|
||
}
|
||
} else {
|
||
// Close the file
|
||
myFile.close();
|
||
print_Error(F("failed"));
|
||
}
|
||
} else {
|
||
print_Error(F("Can't open file"));
|
||
}
|
||
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
display_Clear();
|
||
display_Update();
|
||
}
|
||
|
||
// Reset to read mode
|
||
void resetIntel4400_N64() {
|
||
for (unsigned long currPartition = 0; currPartition < (cartSize * 0x100000); currPartition += 0x20000) {
|
||
setAddress_N64(romBase + currPartition);
|
||
writeWord_N64(0xFF);
|
||
}
|
||
}
|
||
|
||
// Reset Fujitsu MSP55LV100S
|
||
void resetMSP55LV100_N64(unsigned long flashBase) {
|
||
// Send reset Command
|
||
setAddress_N64(flashBase);
|
||
writeWord_N64(0xF0F0);
|
||
delay(100);
|
||
}
|
||
|
||
// Common reset command
|
||
void resetFlashrom_N64(unsigned long flashBase) {
|
||
// Send reset Command
|
||
setAddress_N64(flashBase);
|
||
writeWord_N64(0xF0);
|
||
delay(100);
|
||
}
|
||
|
||
void idFlashrom_N64() {
|
||
// Set size to 0 if no ID is found
|
||
cartSize = 0;
|
||
|
||
// Send flashrom ID command
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
// Read 1 byte vendor ID
|
||
setAddress_N64(romBase);
|
||
sprintf(vendorID, "%02X", readWord_N64());
|
||
// Read 2 bytes flashrom ID
|
||
flashid = readWord_N64();
|
||
sprintf(flashid_str, "%04X", flashid);
|
||
// Read 2 bytes secondary flashrom ID
|
||
setAddress_N64(romBase + 0x1C);
|
||
sprintf(cartID, "%04X", ((readWord_N64() << 8) | (readWord_N64() & 0xFF)));
|
||
|
||
// Spansion S29GL256N(32MB/64MB) with either one or two flashrom chips
|
||
if ((strcmp(cartID, "2201") == 0) && (flashid == 0x227E)) {
|
||
cartSize = 32;
|
||
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
|
||
// Test for second flashrom chip at 0x2000000 (32MB)
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
char tempID[5];
|
||
setAddress_N64(romBase + 0x2000000);
|
||
// Read manufacturer ID
|
||
readWord_N64();
|
||
// Read flashrom ID
|
||
sprintf(tempID, "%04X", readWord_N64());
|
||
|
||
// Check if second flashrom chip is present
|
||
if (strcmp(tempID, "227E") == 0) {
|
||
cartSize = 64;
|
||
}
|
||
resetFlashrom_N64(romBase + 0x2000000);
|
||
}
|
||
|
||
// Macronix MX29LV640(8MB/16MB) with either one or two flashrom chips
|
||
else if ((flashid == 0x22C9) || (flashid == 0x22CB)) {
|
||
cartSize = 8;
|
||
|
||
resetFlashrom_N64(romBase + 0x800000);
|
||
|
||
// Test for second flashrom chip at 0x800000 (8MB)
|
||
setAddress_N64(romBase + 0x800000 + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + 0x800000 + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + 0x800000 + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
char tempID[5];
|
||
setAddress_N64(romBase + 0x800000);
|
||
// Read manufacturer ID
|
||
readWord_N64();
|
||
// Read flashrom ID
|
||
sprintf(tempID, "%04X", readWord_N64());
|
||
|
||
// Check if second flashrom chip is present
|
||
if ((strcmp(tempID, "22C9") == 0) || (strcmp(tempID, "22CB") == 0)) {
|
||
cartSize = 16;
|
||
}
|
||
resetFlashrom_N64(romBase + 0x800000);
|
||
}
|
||
|
||
// Intel 4400L0ZDQ0 (64MB)
|
||
else if (flashid == 0x8816) {
|
||
// Found first flashrom chip, set to 32MB
|
||
cartSize = 32;
|
||
resetIntel4400_N64();
|
||
|
||
// Test if second half of the flashrom might be hidden
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + 0x2000000 + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + 0x2000000 + (0x555 << 1));
|
||
writeWord_N64(0x90);
|
||
|
||
// Read manufacturer ID
|
||
setAddress_N64(romBase + 0x2000000);
|
||
readWord_N64();
|
||
// Read flashrom ID
|
||
sprintf(cartID, "%04X", readWord_N64());
|
||
if (strcmp(cartID, "8813") == 0) {
|
||
cartSize = 64;
|
||
flashid = 0x8813;
|
||
strncpy(flashid_str, cartID, 5);
|
||
}
|
||
resetIntel4400_N64();
|
||
// Empty cartID string
|
||
cartID[0] = '\0';
|
||
}
|
||
|
||
//Fujitsu MSP55LV512/Spansion S29GL512N (64MB)
|
||
else if ((strcmp(cartID, "2301") == 0) && (flashid == 0x227E)) {
|
||
cartSize = 64;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
// Spansion S29GL128N(16MB) with one flashrom chip
|
||
else if ((strcmp(cartID, "2101") == 0) && (flashid == 0x227E)) {
|
||
cartSize = 16;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
// ST M29W128GL(16MB) with one flashrom chip
|
||
else if ((strcmp(cartID, "2100") == 0) && (flashid == 0x227E)) {
|
||
cartSize = 16;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
// Intel 512M29EW(64MB) with one flashrom chip
|
||
else if ((strcmp(cartID, "3901") == 0) && (flashid == 0x227E)) {
|
||
cartSize = 64;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
// Unknown 227E type
|
||
else if (flashid == 0x227E) {
|
||
cartSize = 0;
|
||
// Reset flashrom
|
||
resetFlashrom_N64(romBase);
|
||
}
|
||
|
||
//Test for Fujitsu MSP55LV100S (64MB)
|
||
else {
|
||
// Send flashrom ID command
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0x9090);
|
||
|
||
setAddress_N64(romBase);
|
||
// Read 1 byte vendor ID
|
||
readWord_N64();
|
||
// Read 2 bytes flashrom ID
|
||
sprintf(cartID, "%04X", readWord_N64());
|
||
|
||
if (strcmp(cartID, "7E7E") == 0) {
|
||
resetMSP55LV100_N64(romBase);
|
||
cartSize = 64;
|
||
flashid = 0x7E7E;
|
||
strncpy(flashid_str, cartID, 5);
|
||
}
|
||
}
|
||
if ((flashid == 0x1240) && (strcmp(cartID, "1240") == 0)) {
|
||
print_FatalError(F("Please reseat cartridge"));
|
||
}
|
||
}
|
||
|
||
// Erase Intel flashrom
|
||
void eraseIntel4400_N64() {
|
||
unsigned long flashBase = romBase;
|
||
|
||
print_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
// If the game is smaller than 32Mbit only erase the needed blocks
|
||
unsigned long lastBlock = 0x1FFFFFF;
|
||
if (fileSize < 0x1FFFFFF)
|
||
lastBlock = fileSize;
|
||
|
||
// Erase 4 blocks with 16kwords each
|
||
for (unsigned long currBlock = 0x0; currBlock < 0x1FFFF; currBlock += 0x8000) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
|
||
// Erase up to 255 blocks with 64kwords each
|
||
for (unsigned long currBlock = 0x20000; currBlock < lastBlock; currBlock += 0x1FFFF) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Blink led
|
||
blinkLED();
|
||
}
|
||
|
||
// Check if we should erase the second chip too
|
||
if ((cartSize = 64) && (fileSize > 0x2000000)) {
|
||
// Switch base address to second chip
|
||
flashBase = romBase + 0x2000000;
|
||
|
||
// 255 blocks with 64kwords each
|
||
for (unsigned long currBlock = 0x0; currBlock < 0x1FDFFFF; currBlock += 0x1FFFF) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Blink led
|
||
blinkLED();
|
||
}
|
||
|
||
// 4 blocks with 16kword each
|
||
for (unsigned long currBlock = 0x1FE0000; currBlock < 0x1FFFFFF; currBlock += 0x8000) {
|
||
// Unlock block command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x60);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
// Erase command
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0x20);
|
||
setAddress_N64(flashBase + currBlock);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register
|
||
setAddress_N64(flashBase + currBlock);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(flashBase + currBlock);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
// Erase Fujutsu MSP55LV100S
|
||
void eraseMSP55LV100_N64() {
|
||
unsigned long flashBase = romBase;
|
||
unsigned long sectorSize = 0x20000;
|
||
|
||
print_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
// Send Erase Command to first chip
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0x8080);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + currSector);
|
||
writeWord_N64(0x3030);
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
while ((statusReg | 0x7FFF) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
|
||
// Common chip erase command
|
||
void eraseFlashrom_N64() {
|
||
print_Msg(F("Chip erase..."));
|
||
display_Update();
|
||
|
||
// Send Erase Command
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0x80);
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(romBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + (0x555 << 1));
|
||
writeWord_N64(0x10);
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase);
|
||
statusReg = readWord_N64();
|
||
// Blink led
|
||
blinkLED();
|
||
delay(500);
|
||
}
|
||
}
|
||
|
||
// Common sector erase command
|
||
void eraseSector_N64(unsigned long sectorSize) {
|
||
unsigned long flashBase = romBase;
|
||
|
||
print_Msg(F("Sector erase..."));
|
||
display_Update();
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
// Spansion S29GL256N(32MB/64MB) with two flashrom chips
|
||
if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0) && (flashid == 0x227E)) {
|
||
// Change to second chip
|
||
flashBase = romBase + 0x2000000;
|
||
}
|
||
// Macronix MX29LV640(8MB/16MB) with two flashrom chips
|
||
else if ((currSector == 0x800000) && ((flashid == 0x22C9) || (flashid == 0x22CB))) {
|
||
flashBase = romBase + 0x800000;
|
||
}
|
||
|
||
// Send Erase Command
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0x80);
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
setAddress_N64(romBase + currSector);
|
||
writeWord_N64(0x30);
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
|
||
boolean blankcheckFlashrom_N64() {
|
||
for (unsigned long currByte = romBase; currByte < romBase + fileSize; currByte += 512) {
|
||
// Blink led
|
||
if (currByte % 131072 == 0)
|
||
blinkLED();
|
||
|
||
// Set the address
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
if (readWord_N64() != 0xFFFF) {
|
||
return 0;
|
||
}
|
||
}
|
||
}
|
||
return 1;
|
||
}
|
||
|
||
// Write Intel flashrom
|
||
void writeIntel4400_N64() {
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Write 32 words at a time
|
||
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 64) {
|
||
// Buffered program command
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0xE8);
|
||
|
||
// Check Status register
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
statusReg = readWord_N64();
|
||
}
|
||
|
||
// Write word count (minus 1)
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x1F);
|
||
|
||
// Write buffer
|
||
for (byte currByte = 0; currByte < 64; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ((sdBuffer[currWriteBuffer + currByte] & 0xFF) << 8) | (sdBuffer[currWriteBuffer + currByte + 1] & 0xFF);
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
}
|
||
|
||
// Write Buffer to Flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
|
||
writeWord_N64(0xD0);
|
||
|
||
// Read the status register at last written address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
|
||
statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != 0xFFFF) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 62);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
// Write Fujitsu MSP55LV100S flashrom consisting out of two MSP55LV512 flashroms one used for the high byte the other for the low byte
|
||
void writeMSP55LV100_N64(unsigned long sectorSize) {
|
||
unsigned long flashBase = romBase;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Write 32 bytes at a time
|
||
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += 32) {
|
||
|
||
// 2 unlock commands
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x5555);
|
||
|
||
// Write buffer load command at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x2525);
|
||
// Write word count (minus 1) at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x0F0F);
|
||
|
||
// Define variable before loop so we can use it later when reading the status register
|
||
word currWord;
|
||
|
||
for (byte currByte = 0; currByte < 32; currByte += 2) {
|
||
// Join two bytes into one word
|
||
currWord = ((sdBuffer[currWriteBuffer + currByte] & 0xFF) << 8) | (sdBuffer[currWriteBuffer + currByte + 1] & 0xFF);
|
||
|
||
// Load Buffer Words
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
}
|
||
|
||
// Write Buffer to Flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
|
||
writeWord_N64(0x2929);
|
||
|
||
// Read the status register at last written address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0x7F7F) != (currWord | 0x7F7F)) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + 30);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
// Write Spansion S29GL256N flashrom using the 32 byte write buffer
|
||
void writeFlashBuffer_N64(unsigned long sectorSize, byte bufferSize) {
|
||
unsigned long flashBase = romBase;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
// Spansion S29GL256N(32MB/64MB) with two flashrom chips
|
||
if ((currSector == 0x2000000) && (strcmp(cartID, "2201") == 0)) {
|
||
flashBase = romBase + 0x2000000;
|
||
}
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
|
||
// Write 32 bytes at a time
|
||
for (int currWriteBuffer = 0; currWriteBuffer < 512; currWriteBuffer += bufferSize) {
|
||
|
||
// 2 unlock commands
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
|
||
// Write buffer load command at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64(0x25);
|
||
// Write word count (minus 1) at sector address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer);
|
||
writeWord_N64((bufferSize / 2) - 1);
|
||
|
||
// Define variable before loop so we can use it later when reading the status register
|
||
word currWord = 0;
|
||
|
||
for (byte currByte = 0; currByte < bufferSize; currByte += 2) {
|
||
// Join two bytes into one word
|
||
currWord = ((sdBuffer[currWriteBuffer + currByte] & 0xFF) << 8) | (sdBuffer[currWriteBuffer + currByte + 1] & 0xFF);
|
||
|
||
// Load Buffer Words
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
}
|
||
|
||
// Write Buffer to Flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
|
||
writeWord_N64(0x29);
|
||
|
||
// Read the status register at last written address
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currWriteBuffer + bufferSize - 2);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
// Write MX29LV640 flashrom without write buffer
|
||
void writeFlashrom_N64(unsigned long sectorSize) {
|
||
unsigned long flashBase = romBase;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
// Macronix MX29LV640(8MB/16MB) with two flashrom chips
|
||
if (currSector == 0x800000) {
|
||
flashBase = romBase + 0x800000;
|
||
}
|
||
|
||
// Write to flashrom
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < sectorSize; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
for (int currByte = 0; currByte < 512; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ((sdBuffer[currByte] & 0xFF) << 8) | (sdBuffer[currByte + 1] & 0xFF);
|
||
// 2 unlock commands
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xAA);
|
||
setAddress_N64(flashBase + (0x2AA << 1));
|
||
writeWord_N64(0x55);
|
||
// Program command
|
||
setAddress_N64(flashBase + (0x555 << 1));
|
||
writeWord_N64(0xA0);
|
||
// Write word
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
writeWord_N64(currWord);
|
||
|
||
// Read the status register
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
word statusReg = readWord_N64();
|
||
while ((statusReg | 0xFF7F) != (currWord | 0xFF7F)) {
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
statusReg = readWord_N64();
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
unsigned long verifyFlashrom_N64() {
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
writeErrors = 0;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
|
||
// Blink led
|
||
blinkLED();
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
for (int currByte = 0; currByte < 512; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ((sdBuffer[currByte] & 0xFF) << 8) | (sdBuffer[currByte + 1] & 0xFF);
|
||
// Read flash
|
||
setAddress_N64(romBase + currSector + currSdBuffer + currByte);
|
||
// Compare both
|
||
if (readWord_N64() != currWord) {
|
||
writeErrors++;
|
||
// Abord if too many errors
|
||
if (writeErrors > 20) {
|
||
print_Msg(F("More than "));
|
||
// Close the file:
|
||
myFile.close();
|
||
return writeErrors;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
return writeErrors;
|
||
} else {
|
||
print_STR(open_file_STR, 1);
|
||
display_Update();
|
||
return 9999;
|
||
}
|
||
}
|
||
|
||
/******************************************
|
||
N64 Gameshark Flash Functions
|
||
*****************************************/
|
||
void flashGameshark_N64() {
|
||
// Check flashrom ID's
|
||
idGameshark_N64();
|
||
|
||
// Check for SST 29LE010 (0808)/SST 28LF040 (0404)/AMTEL AT29LV010A (3535)/SST 29EE010 (0707)
|
||
// !!!! This has been confirmed to allow reading of v1.07, v1.09, v2.0-2.21, v3.2-3.3 !!!!
|
||
// !!!! 29LE010/29EE010/AT29LV010A are very similar and can possibly be written to with this process. !!!!
|
||
// !!!! !!!!
|
||
// !!!! PROCEED AT YOUR OWN RISK !!!!
|
||
// !!!! !!!!
|
||
// !!!! SST 29EE010 may have a 5V requirement for writing however dumping works at 3V. As such it is not !!!!
|
||
// !!!! advised to write to a cart with this chip until further testing can be completed. !!!!
|
||
|
||
if (flashid == 0x0808 || flashid == 0x0404 || flashid == 0x3535 || flashid == 0x0707) {
|
||
backupGameshark_N64();
|
||
println_Msg("");
|
||
println_Msg(F("This will erase your"));
|
||
println_Msg(F("Gameshark cartridge"));
|
||
println_Msg(F("Attention: Use 3.3V!"));
|
||
println_Msg(F("Power OFF if Unsure!"));
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
|
||
// Launch file browser
|
||
filePath[0] = '\0';
|
||
sd.chdir("/");
|
||
fileBrowser(F("Select z64 file"));
|
||
display_Clear();
|
||
display_Update();
|
||
|
||
// Create filepath
|
||
sprintf(filePath, "%s/%s", filePath, fileName);
|
||
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
// Get rom size from file
|
||
fileSize = myFile.fileSize();
|
||
print_Msg(F("File size: "));
|
||
print_Msg(fileSize / 1024);
|
||
println_Msg(F("KB"));
|
||
display_Update();
|
||
|
||
// Compare file size to flashrom size
|
||
if (fileSize > 262144) {
|
||
print_FatalError(file_too_big_STR);
|
||
}
|
||
|
||
// SST 29LE010, chip erase not needed as this eeprom automaticly erases during the write cycle
|
||
eraseGameshark_N64();
|
||
|
||
// Write flashrom
|
||
print_Msg(F("Writing "));
|
||
println_Msg(filePath);
|
||
display_Update();
|
||
writeGameshark_N64();
|
||
|
||
// Close the file:
|
||
myFile.close();
|
||
|
||
// Verify
|
||
print_STR(verifying_STR, 0);
|
||
display_Update();
|
||
writeErrors = verifyGameshark_N64();
|
||
|
||
if (writeErrors == 0) {
|
||
println_Msg(F("OK"));
|
||
println_Msg(F(""));
|
||
println_Msg(F("Turn Cart Reader off now"));
|
||
display_Update();
|
||
while (1)
|
||
;
|
||
} else {
|
||
print_Msg(writeErrors);
|
||
print_Msg(F(" bytes "));
|
||
print_Error(did_not_verify_STR);
|
||
}
|
||
} else {
|
||
print_Error(F("Can't open file"));
|
||
}
|
||
}
|
||
// If the ID is unknown show error message
|
||
else {
|
||
print_Msg(F("ID: "));
|
||
println_Msg(flashid_str);
|
||
print_Error(F("Unknown flashrom"));
|
||
}
|
||
|
||
// Prints string out of the common strings array either with or without newline
|
||
print_STR(press_button_STR, 1);
|
||
display_Update();
|
||
wait();
|
||
display_Clear();
|
||
display_Update();
|
||
}
|
||
|
||
|
||
//Test for SST 29LE010 or SST 28LF040 (0404) or AMTEL AT29LV010A (3535) or SST 29EE010 (0707)
|
||
void idGameshark_N64() {
|
||
//Send flashrom ID command
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0x9090);
|
||
|
||
setAddress_N64(romBase);
|
||
// Read 1 byte vendor ID
|
||
readWord_N64();
|
||
// Read 2 bytes flashrom ID
|
||
flashid = readWord_N64();
|
||
sprintf(flashid_str, "%04X", flashid);
|
||
// Reset flashrom
|
||
resetGameshark_N64();
|
||
}
|
||
|
||
//Reset ST29LE010
|
||
void resetGameshark_N64() {
|
||
// Send reset Command
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xF0F0);
|
||
delay(100);
|
||
}
|
||
|
||
// Read rom and save to the SD card
|
||
void backupGameshark_N64() {
|
||
// create a new folder
|
||
EEPROM_readAnything(0, foldern);
|
||
sprintf(fileName, "GS%d", foldern);
|
||
strcat(fileName, ".z64");
|
||
sd.mkdir("N64/ROM/Gameshark", true);
|
||
sd.chdir("N64/ROM/Gameshark");
|
||
|
||
display_Clear();
|
||
print_Msg(F("Saving "));
|
||
print_Msg(fileName);
|
||
println_Msg(F("..."));
|
||
display_Update();
|
||
|
||
// write new folder number back to eeprom
|
||
foldern = foldern + 1;
|
||
EEPROM_writeAnything(0, foldern);
|
||
|
||
// Open file on sd card
|
||
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
|
||
print_FatalError(sd_error_STR);
|
||
}
|
||
|
||
for (unsigned long currByte = romBase + 0xC00000; currByte < (romBase + 0xC00000 + 262144); currByte += 512) {
|
||
// Blink led
|
||
if (currByte % 16384 == 0)
|
||
blinkLED();
|
||
|
||
// Set the address for the next 512 bytes
|
||
setAddress_N64(currByte);
|
||
|
||
for (int c = 0; c < 512; c += 2) {
|
||
// split word
|
||
word myWord = readWord_N64();
|
||
byte loByte = myWord & 0xFF;
|
||
byte hiByte = myWord >> 8;
|
||
|
||
// write to buffer
|
||
sdBuffer[c] = hiByte;
|
||
sdBuffer[c + 1] = loByte;
|
||
}
|
||
myFile.write(sdBuffer, 512);
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
}
|
||
|
||
// Send chip erase to the two SST29LE010 inside the Gameshark
|
||
void eraseGameshark_N64() {
|
||
println_Msg(F("Erasing..."));
|
||
display_Update();
|
||
|
||
//Sending erase command according to datasheet
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0x8080);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0x1010);
|
||
|
||
delay(20);
|
||
}
|
||
|
||
// Write Gameshark with 2x SST29LE010 Eeproms
|
||
void writeGameshark_N64() {
|
||
// Each 29LE010 has 1024 pages, each 128 bytes in size
|
||
for (unsigned long currPage = 0; currPage < fileSize / 2; currPage += 128) {
|
||
// Fill SD buffer with twice the amount since we flash 2 chips
|
||
myFile.read(sdBuffer, 256);
|
||
// Blink led
|
||
blinkLED();
|
||
|
||
//Send page write command to both flashroms
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xAAAA);
|
||
setAddress_N64(romBase + 0x5554);
|
||
writeWord_N64(0x5555);
|
||
setAddress_N64(romBase + 0xAAAA);
|
||
writeWord_N64(0xA0A0);
|
||
|
||
// Write 1 page each, one flashrom gets the low byte, the other the high byte.
|
||
for (unsigned long currByte = 0; currByte < 256; currByte += 2) {
|
||
// Set address
|
||
setAddress_N64(romBase + 0xC00000 + (currPage * 2) + currByte);
|
||
// Join two bytes into one word
|
||
word currWord = ((sdBuffer[currByte] & 0xFF) << 8) | (sdBuffer[currByte + 1] & 0xFF);
|
||
// Send byte data
|
||
writeWord_N64(currWord);
|
||
}
|
||
delay(30);
|
||
}
|
||
}
|
||
|
||
unsigned long verifyGameshark_N64() {
|
||
// Open file on sd card
|
||
if (myFile.open(filePath, O_READ)) {
|
||
writeErrors = 0;
|
||
|
||
for (unsigned long currSector = 0; currSector < fileSize; currSector += 131072) {
|
||
// Blink led
|
||
blinkLED();
|
||
for (unsigned long currSdBuffer = 0; currSdBuffer < 131072; currSdBuffer += 512) {
|
||
// Fill SD buffer
|
||
myFile.read(sdBuffer, 512);
|
||
for (int currByte = 0; currByte < 512; currByte += 2) {
|
||
// Join two bytes into one word
|
||
word currWord = ((sdBuffer[currByte] & 0xFF) << 8) | (sdBuffer[currByte + 1] & 0xFF);
|
||
// Read flash
|
||
setAddress_N64(romBase + 0xC00000 + currSector + currSdBuffer + currByte);
|
||
// Compare both
|
||
if (readWord_N64() != currWord) {
|
||
if ((flashid == 0x0808) && (currSector + currSdBuffer + currByte > 0x3F) && (currSector + currSdBuffer + currByte < 0x1080)) {
|
||
// Gameshark maps this area to the bootcode of the plugged in cartridge
|
||
} else {
|
||
writeErrors++;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
// Close the file:
|
||
myFile.close();
|
||
return writeErrors;
|
||
} else {
|
||
print_STR(open_file_STR, 1);
|
||
display_Update();
|
||
return 9999;
|
||
}
|
||
}
|
||
|
||
#endif
|
||
|
||
//******************************************
|
||
// End of File
|
||
//******************************************
|