Commit Graph

17 Commits

Author SHA1 Message Date
Alex Barney
f723f6f39a Update to LibHac 0.5.0 (#725)
* Update to libhac 0.5

* Catch HorizonResultException in IFileSystemProxy

* Changes based on feedback
2019-07-10 19:20:01 +02:00
Ac_K
596b61ce1f IPC services refactoring (#726)
* IPC services refactoring

- Use custom Attributes to handle services.
- Add a way to set the permissions and fix the bsd service to use it.
- Little cleanup.
- C#7.1 is required.

* fix var name

* fix syntax

* Change Permission to Parameter

* Delete BsdServicePermissionLevel.cs

* Fix Linq
2019-07-10 12:59:54 -03:00
Thomas Guillemard
708620252e ITimeZoneService rewrite (#722)
* Clean up ITimeZoneService

Add error codes and simplify parsing

* Add accurate timezone logic

TOOD: LoadTimeZoneRule and location name cmds.

* Integrate the new TimeZone logic

* SCREAMING_UNIX_CASE => PascalCase

* Address comments

* Reduce use of pointer in the LoadTimeZoneRule logic

* Address comments

* Realign tzIfStream logic in LoadTimeZoneRule

* Address gdk's comments
2019-07-04 17:20:40 +02:00
Alex Barney
3541a9053f Update to LibHac 0.4.1 (#698)
* Update to LibHac 0.4.1

Updates the IFile Read and Write methods to use any specified ReadOption and WriteOption

* Move casts around
2019-06-07 00:01:44 +02:00
Alex Barney
5fc1f6a1af Update to version 0.4 of LibHac (#689)
* It compiles

* Print correct name when loading an exefs

* Use DirectorySaveDataFileSystem for savedata

* Handle more errors in IFileSystem

* Remove structs replaced by LibHac structs

* Fix alignment

* Fix alignment again

* Fix IFile and IFileSystem IPC

* Alignment

* Use released libhac version
2019-06-01 02:31:10 +02:00
BaronKiko
a07086c280 Built in profiling (#567)
* Profiler initial setup

* Capture actual timing data

* Profiling data dumped to file on close

* Support for multiple sessions under the same name

* Service profiling

* Sort output for easier read

* csv output

* Split session into 2 seperate values

* Refactor name to category

* Basic profiling window dummy. Toggle with F1 or set key with config
No actual data displayed yet, just a pretty triangle

* Simple font rendering

* Display some actual timing data

* Fix font bearing being ignored

* x bearing and advance. Fixed y bearing calc

* Different coloured lines to make reading easier

* Scrolling

* Multiple columns for name

* Column titles

* display in ms rather than ticks

* Bars to display times

* Sortable columns

* Regex filtering

* Better instant timing calculation
Fixed minor regex bug

* Better filtering
Better max value calculation
Skip some rendering to reduce profiler weight

* Variable update rate

* Show/hide inactive button
Some other touchups

* Add missing project reference

* Hide inactive and pause

* Fix viewport errors

* Update initial window position

* Variable name cleanup

* Disable timing dump by default

* Internal Profile refactor and cleanup

* Timing info cleanup

* Profile config cleanup

* Settings cleanup

* Button refactor

* Profile refactor

* Profile window cleanup

* Window manager refactor

* Font service cleanup

* Fixed bug in profiling method where method was called twice without profiling enabled

* Allow update rates of less than 1hz

* Stop using window.run because it's apparently not great for performance.
Some other performance things, should only draw a new frame when something has changed

* Improved time tracking to keep history

* Profile window was getting too long so I added regions and split bar rendering out into partial class

* Dummy graph view with button to toggle

* Realtime graphing initial commit

* Display totals on new bar

* Simple zooming support with arrow keys

* Limit graph zoom and label start and stop

* Added support for timing flags

* Stop data running away when paused and frame updated

* Manual step button

* Update at when flag issued (ie every frame)

* Removed useless finish profiling call

* Enable and disable profiling at compile time.

* Better plage for frame swap flag, also kept enough flags to cover larger time spans

* No more stopwatches created, uses PerformanceCounter now

* public and internal fields to props

* Move visible update to update rather than draw as it causes a lockup if called from draw
Also added profile window disposal so closing main window closes profiler too

* Fixed optimization settings for profiled builds

* Appveyer script guess to add profiling builds

* Quotes

* 1 less quote

* Maybe escape space?

* Specify config

* Different approach

* Fix file paths

* Fix another path

* Better artifact naming

* Missing -

* test  string

* Removed for, to test

* readd for

* moved dashes around so artifacts can begin with letters

* quote env vars

* martix

* Removed configs

* Much more efficient capture, ConcurrentDictionary was causing too much overhead

* Skip repeating pixels during draw

* Stop ram usage getting too high. Compensating for cleanup doing more now

* Profile CPU, execute skipped because it's just too much work

* Fixed bug with skipping draws. Furthest needed to be reset every loop

* Less distracting colour for timing flags

* Removed profile method function. It just doesn't play nice with conditional compilation so best to remove it now before it's used a lot

* Null check for category, group and item

* Forgot to reset instant count/time

* Increment line when blank

* Fix threading conflict
Fixed instant count and time. Now accuratly represents the total time and count in the buffer

* Fixed bug in time rendering where times were being trimmed to an int.
Also added  microsecond/millisecond formatting to reduce the number of decimal places needed

* Support for multiple profiling levels

* Sometimes it would have to wait a long time for lock to clear so moved it to a tryenter and skip if already locked

* Dumb bug regarding clearing of timestamps. Start is already removed so no need to add it to the start

* Optimisations in drawing routine:
Only calculate bar top and bottom once per bar rather than once per timestamp
Pre-calculate the right side of the graph as it was being calculated multiple times per bar
Skip rendering timestamps that occupy the same pixel space now uses the raw timestamp to decide. While technically not as accurate it's much easier as the right side of the bar doesn't have to be calculated for a skipped timestamp

* Couple alignment changes

* Custom equals overload for profile config. The default implpmentation was just too slow

* Bump cleanup thread priority. It clears the timer queue so it need to be run frequently

* Fixed bug with scrolling caused by recent rendering optimisations. Simply forgot to increment the line index on a skipped line

* Stopped blocking memory disposal so much. Also parralised(?) cleanup call

* Uses Arial for font.

* Enable AA

* Inital seperated config support

* Fix profile input from keyboard

* Check toggle visible key from profiler

* Can't use conditional here as _profileWindow doesn't exist it non-profiling build

* Removed junk from merge in sln

* Fromatting cleanup for review

* Fiked small bug caused by race condition

* Added multiple flags with colours
Added way to set max flags

* Fixed flag times
Dispays time flags in window

* Colors for text frame times

* enable and disable flags button added
better fix for race crash

* Re factored npad out

* Explicitly specified type in foreach

* Removed extra line

* Added s to fix nit

* Comment to clarify default time

* Another s nit

* Ordering nit

* Uses Interlocked.Increment over lock

* Unindented #if's and #regions

* Comment to clarify these are indexes in the list

* Uses iequatable over override equals to avoid conversion and checks at runtime

* Removed no longer used variable
2019-04-26 14:53:10 +10:00
Alex Barney
290f5e812e Update to LibHac 0.2.0 (#549)
* Update to LibHac 0.2.0

* Changes based on feedback
2019-01-05 01:41:49 +01:00
gdkchan
00579927e4
Better process implementation (#491)
* Initial implementation of KProcess

* Some improvements to the memory manager, implement back guest stack trace printing

* Better GetInfo implementation, improve checking in some places with information from process capabilities

* Allow the cpu to read/write from the correct memory locations for accesses crossing a page boundary

* Change long -> ulong for address/size on memory related methods to avoid unnecessary casts

* Attempt at implementing ldr:ro with new KProcess

* Allow BSS with size 0 on ldr:ro

* Add checking for memory block slab heap usage, return errors if full, exit gracefully

* Use KMemoryBlockSize const from KMemoryManager

* Allow all methods to read from non-contiguous locations

* Fix for TransactParcelAuto

* Address PR feedback, additionally fix some small issues related to the KIP loader and implement SVCs GetProcessId, GetProcessList, GetSystemInfo, CreatePort and ManageNamedPort

* Fix wrong check for source pages count from page list on MapPhysicalMemory

* Fix some issues with UnloadNro on ldr:ro
2018-11-28 20:18:09 -02:00
gdkchan
b833183ef6 HwOpus service implementation (#201)
* Started to implement the hwopus service

* Write outputs on decode method, some basic error handling

* Fix buffer size read from header and check

* Fix order of values
2018-11-17 04:36:49 +01:00
Alex Barney
53e6664526 Update libhac. Load tickets from XCI files (#476) 2018-10-30 23:34:27 -03:00
ReinUsesLisp
b3a4662be1 Move logging to Ryujinx.Common and make it a static class (#413) 2018-10-17 14:15:50 -03:00
Alex Barney
5821ff675d Misc content loading improvements (#432)
* Misc content loading improvements
2018-10-06 18:11:47 +03:00
Alex Barney
3227218114 Add XCI, NSP and NCA loading support (#404)
* Add XCI and NCA loading support

* Code style changes

* Add NSP loading

* Changes from code review

* Read XCIs with patches. Code style

* Add KEYS.md file

* Make file extension matching case-insensitive
2018-09-08 15:33:27 -03:00
emmauss
675f3f6f81 Implement loading of profile image (#391)
* implement loading of profile image

* rename icon to profilepicture

* rename icon file
2018-09-01 19:04:20 -03:00
Thomas Guillemard
eeb626947e Implement Shared Fonts (#215)
* Implement Shared Fonts

This fully implements shared fonts.
This commit is provided without fonts.
This commit also add Size to HSharedMem.Positions to be able to add fonts to shared zones when RequestLoad is called.

* Require the user to provide fonts in RyuFS/system

* Use File.Exits instead of relying ona try/catch and change system resource exception format a bit

* Make sure that font sum doesn't exceed 17MB

Also rename font data dictionary for coherence.
2018-08-04 18:38:49 -03:00
Thomas Guillemard
2f25b34941 Add linux-x64 to RID property to make tests works on linux (#205) 2018-06-30 12:43:04 -03:00
gdkchan
76f3b1b3a4 Rename Ryujinx.Core to Ryujinx.HLE and add a separate project for a future LLE implementation 2018-06-10 21:46:42 -03:00