SummerCart64/sw/riscv/src/sys.h

196 lines
5.6 KiB
C
Raw Normal View History

#ifndef SYS_H__
#define SYS_H__
#include <stddef.h>
#include <stdint.h>
#include <stdbool.h>
typedef volatile uint8_t io8_t;
typedef volatile uint32_t io32_t;
#define RAM_BASE (0x00000000UL)
#define RAM (*((io32_t *) RAM_BASE))
#define RAM_SIZE (16 * 1024)
#define FLASH_BASE (0x10000000UL)
#define FLASH (*((io32_t *) FLASH_BASE))
#define FLASH_SIZE (0x39800)
#define FLASH_NUM_SECTORS (4)
typedef volatile struct flash_config_regs {
io32_t SR;
io32_t CR;
} flash_config_regs_t;
#define FLASH_CONFIG_BASE (0x18000000UL)
#define FLASH_CONFIG ((flash_config_regs_t *) FLASH_CONFIG_BASE)
#define FLASH_SR_STATUS_MASK (3 << 0)
#define FLASH_SR_STATUS_IDLE (0)
#define FLASH_SR_STATUS_BUSY_ERASE (1)
#define FLASH_SR_STATUS_BUSY_WRITE (2)
#define FLASH_SR_STATUS_BUSY_READ (3)
#define FLASH_SR_READ_SUCCESSFUL (1 << 2)
#define FLASH_SR_WRITE_SUCCESSFUL (1 << 3)
#define FLASH_SR_ERASE_SUCCESSFUL (1 << 4)
#define FLASH_SR_WRITE_PROTECT_BIT (5)
#define FLASH_CR_PAGE_ERASE_BIT (0)
#define FLASH_CR_SECTOR_ERASE_BIT (20)
#define FLASH_CR_SECTOR_ERASE_MASK (7 << FLASH_CR_SECTOR_ERASE_BIT)
#define FLASH_CR_WRITE_PROTECT_BIT (23)
typedef volatile struct gpio_regs {
io8_t ODR;
io8_t IDR;
io8_t OER;
io8_t __padding;
} gpio_regs_t;
#define GPIO_BASE (0x20000000UL)
#define GPIO ((gpio_regs_t *) GPIO_BASE)
typedef volatile struct i2c_regs {
io32_t SCR;
io32_t DR;
} i2c_regs_t;
#define I2C_BASE (0x30000000UL)
#define I2C ((i2c_regs_t *) I2C_BASE)
#define I2C_SCR_START (1 << 0)
#define I2C_SCR_STOP (1 << 1)
#define I2C_SCR_MACK (1 << 2)
#define I2C_SCR_ACK (1 << 3)
#define I2C_SCR_BUSY (1 << 4)
typedef volatile struct usb_regs {
io32_t SCR;
io8_t DR;
io8_t __padding_1[3];
io8_t ESCAPE;
io8_t __padding_2[3];
} usb_regs_t;
#define USB_BASE (0x40000000UL)
#define USB ((usb_regs_t *) USB_BASE)
#define USB_SCR_RXNE (1 << 0)
#define USB_SCR_TXE (1 << 1)
#define USB_SCR_FLUSH_RX (1 << 2)
#define USB_SCR_FLUSH_TX (1 << 3)
#define USB_SCR_ENABLED (1 << 4)
#define USB_SCR_PWREN (1 << 5)
#define USB_SCR_ESCAPE_PENDING (1 << 6)
#define USB_SCR_ESCAPE_ACK (1 << 7)
typedef volatile struct uart_regs {
io32_t SCR;
io8_t DR;
io8_t __padding[3];
} uart_regs_t;
#define UART_BASE (0x50000000UL)
#define UART ((uart_regs_t *) UART_BASE)
#define UART_SCR_RXNE (1 << 0)
#define UART_SCR_TXE (1 << 1)
typedef volatile struct dma_regs {
io32_t SCR;
io32_t MADDR;
io32_t ID_LEN;
} dma_regs_t;
#define DMA_BASE (0x60000000UL)
#define DMA ((dma_regs_t *) DMA_BASE)
#define DMA_SCR_START (1 << 0)
#define DMA_SCR_STOP (1 << 1)
#define DMA_SCR_DIR (1 << 2)
#define DMA_SCR_BUSY (1 << 3)
typedef volatile struct cfg_regs {
io32_t SCR;
io32_t DDIPL_OFFSET;
io32_t SAVE_OFFSET;
io8_t CMD;
io8_t __padding[3];
io32_t DATA[2];
io32_t VERSION;
io32_t RECONFIGURE;
} cfg_regs_t;
#define CFG_BASE (0x70000000UL)
#define CFG ((cfg_regs_t *) CFG_BASE)
#define CFG_SCR_SDRAM_SWITCH (1 << 0)
#define CFG_SCR_SDRAM_WRITABLE (1 << 1)
#define CFG_SCR_DD_EN (1 << 2)
#define CFG_SCR_SRAM_EN (1 << 3)
#define CFG_SCR_SRAM_BANKED (1 << 4)
#define CFG_SCR_FLASHRAM_EN (1 << 5)
#define CFG_SCR_SKIP_BOOTLOADER (1 << 6)
#define CFG_SCR_CMD_ERROR (1 << 28)
#define CFG_SCR_USB_WAITING (1 << 29)
#define CFG_SCR_CPU_BUSY (1 << 30)
#define CFG_SCR_CPU_READY (1 << 31)
#define SDRAM_BASE (0x80000000UL)
#define SDRAM (*((io32_t *) SDRAM_BASE))
#define SDRAM_SIZE (64 * 1024 * 1024)
typedef volatile struct flashram_regs {
io32_t SCR;
io32_t __padding[31];
io32_t BUFFER[32];
} flashram_regs_t;
#define FLASHRAM_BASE (0x90000000UL)
#define FLASHRAM ((flashram_regs_t *) FLASHRAM_BASE)
#define FLASHRAM_OPERATION_PENDING (1 << 0)
#define FLASHRAM_OPERATION_DONE (1 << 1)
#define FLASHRAM_WRITE_OR_ERASE (1 << 2)
#define FLASHRAM_SECTOR_OR_ALL (1 << 3)
#define FLASHRAM_PAGE_BIT (8)
typedef volatile struct joybus_regs {
io32_t SCR;
io32_t DATA[3];
} joybus_regs_t;
#define JOYBUS_BASE (0xA0000000UL)
#define JOYBUS ((joybus_regs_t *) JOYBUS_BASE)
#define JOYBUS_SCR_RX_READY (1 << 0)
#define JOYBUS_SCR_RX_STOP_BIT (1 << 1)
#define JOYBUS_SCR_TX_START (1 << 2)
#define JOYBUS_SCR_TX_BUSY (1 << 3)
#define JOYBUS_SCR_RX_RESET (1 << 6)
#define JOYBUS_SCR_TX_RESET (1 << 7)
#define JOYBUS_SCR_RX_LENGTH_BIT (8)
#define JOYBUS_SCR_RX_LENGTH_MASK (0x7F << JOYBUS_SCR_RX_LENGTH_BIT)
#define JOYBUS_SCR_TX_LENGTH_BIT (16)
void reset_handler(void);
#endif