The-Homebrew-Cloud/SummerCart64
2
0
Fork 0
mirror of https://github.com/Polprzewodnikowy/SummerCart64.git synced 2024-11-26 07:34:15 +01:00
Code Issues Packages Projects Releases Wiki Activity
527160731f
SummerCart64/fw/rtl/external/qflexpress.v

2240 lines
57 KiB
Coq
Raw Normal View History

[SC64] Initial version
2020-10-08 02:04:42 +02:00
////////////////////////////////////////////////////////////////////////////////
//
// Filename: qflexpress.v
//
// Project: A Set of Wishbone Controlled SPI Flash Controllers
//
// Purpose: To provide wishbone controlled read access (and read access
// *only*) to the QSPI flash, using a flash clock equal to the
// system clock, and nothing more. Indeed, this is designed to be a
// *very* stripped down version of a flash driver, with the goal of
// providing 1) very fast access for 2) very low logic count.
//
// Three modes/states of operation:
// 1. Startup/maintenance, places the device in the Quad XIP mode
// 2. Normal operations, takes 12+8N clocks to read a value
// 3. Configuration--useful to allow an external controller issue erase
// or program commands (or other) without requiring us to
// clutter up the logic with a giant state machine
//
// STARTUP
// 1. Waits for the flash to come on line
// Start out idle for 300 uS
// 2. Sends a signal to remove the flash from any QSPI read mode. In our
// case, we'll send several clocks of an empty command. In SPI
// mode, it'll get ignored. In QSPI mode, it'll remove us from
// QSPI mode.
// 3. Explicitly places and leaves the flash into QSPI mode
// 0xEB 3(0x00) 0xa0 6(0x00)
// 4. All done
//
// Creator: Dan Gisselquist, Ph.D.
// Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2018-2019, Gisselquist Technology, LLC
//
// This file is part of the set of Wishbone controlled SPI flash controllers
// project
//
// The Wishbone SPI flash controller project is free software (firmware):
// you can redistribute it and/or modify it under the terms of the GNU Lesser
// General Public License as published by the Free Software Foundation, either
// version 3 of the License, or (at your option) any later version.
//
// The Wishbone SPI flash controller project is distributed in the hope
// that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
// warranty of MERCHANTIBILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this program. (It's in the $(ROOT)/doc directory. Run make
// with no target there if the PDF file isn't present.) If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License: LGPL, v3, as defined and found on www.gnu.org,
// http://www.gnu.org/licenses/lgpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
`default_nettype none
//
// 290 raw, 372 w/ pipe, 410 cfg, 499 cfg w/pipe
module qflexpress(i_clk, i_reset,
i_wb_cyc, i_wb_stb, i_cfg_stb, i_wb_we, i_wb_addr, i_wb_data,
o_wb_ack, o_wb_stall, o_wb_data,
o_qspi_sck, o_qspi_cs_n, o_qspi_mod, o_qspi_dat, i_qspi_dat);
//
// LGFLASHSZ is the size of the flash memory. It defines the number
// of bits in the address register and more. This controller will support
// flash sizes up to 2^LGFLASHSZ, where LGFLASHSZ goes up to 32.
parameter LGFLASHSZ=24;
//
// OPT_PIPE makes it possible to string multiple requests together,
// with no intervening need to shutdown the QSPI connection and send a
// new address
parameter [0:0] OPT_PIPE = 1'b1;
//
// OPT_CFG enables the configuration logic port, and hence the
// ability to erase and program the flash, as well as the ability
// to perform other commands such as read-manufacturer ID, adjust
// configuration registers, etc.
parameter [0:0] OPT_CFG = 1'b1;
//
// OPT_STARTUP enables the startup logic
parameter [0:0] OPT_STARTUP = 1'b1;
//
// OPT_ADDR32 enables 32 bit addressing, rather than 24bit
// Control this by controlling the LGFLASHSZ parameter above. Anything
// greater than 24 will use 32-bit addressing, otherwise the regular
// 24-bit addressing
localparam [0:0] OPT_ADDR32 = (LGFLASHSZ > 24);
//
parameter OPT_CLKDIV = 0;
//
// Normally, I place the first byte read from the flash, and the lowest
// flash address, into bits [7:0], and then shift it up--to where upon
// return it is found in bits [31:24]. This is ideal for a big endian
// systems, not so much for little endian systems. The endian swap
// allows the bus to swap the return values in order to support little
// endian systems.
parameter [0:0] OPT_ENDIANSWAP = 1'b1;
//
// OPT_ODDR will be true any time the clock has no clock division
localparam [0:0] OPT_ODDR = (OPT_CLKDIV == 0);
//
// CKDV_BITS is the number of bits necessary to represent a counter
// that can do the CLKDIV division
localparam CKDV_BITS = (OPT_CLKDIV == 0) ? 0
: ((OPT_CLKDIV < 2) ? 1
: ((OPT_CLKDIV < 4) ? 2
: ((OPT_CLKDIV < 8) ? 3
: ((OPT_CLKDIV < 16) ? 4
: ((OPT_CLKDIV < 32) ? 5
: ((OPT_CLKDIV < 64) ? 6
: ((OPT_CLKDIV < 128) ? 7
: ((OPT_CLKDIV < 256) ? 8 : 9))))))));
//
// RDDELAY is the number of clock cycles from when o_qspi_dat is valid
// until i_qspi_dat is valid. Read delays from 0-4 have been verified.
// DDR Registered I/O on a Xilinx device can be done with a RDDELAY=3
// On Intel/Altera devices, RDDELAY=2 works
// I'm using RDDELAY=0 for my iCE40 devices
//
parameter RDDELAY = 0;
//
// NDUMMY is the number of "dummy" clock cycles between the 24-bits of
// the Quad I/O address and the first data bits. This includes the
// two clocks of the Quad output mode byte, 0xa0. The default is 10
// for a Micron device. Windbond seems to want 2. Note your flash
// device carefully when you choose this value.
//
parameter NDUMMY = 6;
//
// For dealing with multiple flash devices, the OPT_STARTUP_FILE allows
// a hex file to be provided containing the necessary script to place
// the design into the proper initial configuration.
parameter OPT_STARTUP_FILE="";
//
//
//
//
localparam [4:0] CFG_MODE = 12;
localparam [4:0] QSPEED_BIT = 11;
localparam [4:0] DSPEED_BIT = 10; // Not supported
localparam [4:0] DIR_BIT = 9;
localparam [4:0] USER_CS_n = 8;
//
localparam [1:0] NORMAL_SPI = 2'b00;
localparam [1:0] QUAD_WRITE = 2'b10;
localparam [1:0] QUAD_READ = 2'b11;
// localparam [7:0] DIO_READ_CMD = 8'hbb;
localparam [7:0] QIO_READ_CMD = OPT_ADDR32 ? 8'hec : 8'heb;
//
localparam AW=LGFLASHSZ-1;
localparam DW=32;
//
`ifdef FORMAL
localparam F_LGDEPTH=$clog2(3+RDDELAY+(OPT_ADDR32 ? 2:0));
reg f_past_valid;
`endif
//
//
input wire i_clk, i_reset;
//
input wire i_wb_cyc, i_wb_stb, i_cfg_stb, i_wb_we;
input wire [(AW-1):0] i_wb_addr;
input wire [(DW-1):0] i_wb_data;
//
output reg o_wb_ack, o_wb_stall;
output reg [(DW-1):0] o_wb_data;
//
output reg o_qspi_sck;
output reg o_qspi_cs_n;
output reg [1:0] o_qspi_mod;
output wire [3:0] o_qspi_dat;
input wire [3:0] i_qspi_dat;
//
// Debugging port
// output wire o_dbg_trigger;
// output wire [31:0] o_debug;
reg dly_ack, read_sck, xtra_stall;
// clk_ctr must have enough bits for ...
// 8 address clocks, 4-bits each
// NDUMMY dummy clocks, including two mode bytes
// 8 data clocks
// (RDDELAY clocks not counted here)
reg [4:0] clk_ctr;
//
// User override logic
//
reg cfg_mode, cfg_speed, cfg_dir, cfg_cs;
wire cfg_write, cfg_hs_write, cfg_ls_write, cfg_hs_read,
user_request, bus_request, pipe_req, cfg_noop, cfg_stb;
//
assign bus_request = (i_wb_stb)&&(!o_wb_stall)
&&(!i_wb_we)&&(!cfg_mode);
assign cfg_stb = (OPT_CFG)&&(i_cfg_stb)&&(!o_wb_stall);
assign cfg_noop = ((cfg_stb)&&((!i_wb_we)||(!i_wb_data[CFG_MODE])
||(i_wb_data[USER_CS_n])))
||((!OPT_CFG)&&(i_cfg_stb)&&(!o_wb_stall));
assign user_request = (cfg_stb)&&(i_wb_we)&&(i_wb_data[CFG_MODE]);
assign cfg_write = (user_request)&&(!i_wb_data[USER_CS_n]);
assign cfg_hs_write = (cfg_write)&&(i_wb_data[QSPEED_BIT])
&&(i_wb_data[DIR_BIT]);
assign cfg_hs_read = (cfg_write)&&(i_wb_data[QSPEED_BIT])
&&(!i_wb_data[DIR_BIT]);
assign cfg_ls_write = (cfg_write)&&(!i_wb_data[QSPEED_BIT]);
reg ckstb, ckpos, ckneg, ckpre;
reg maintenance;
reg [1:0] m_mod;
reg m_cs_n;
reg m_clk;
reg [3:0] m_dat;
generate if (OPT_ODDR)
begin
always @(*)
begin
ckstb = 1'b1;
ckpos = 1'b1;
ckneg = 1'b1;
ckpre = 1'b1;
end
end else if (OPT_CLKDIV == 1)
begin : CKSTB_ONE
reg clk_counter;
initial clk_counter = 1'b1;
always @(posedge i_clk)
if (i_reset)
clk_counter <= 1'b1;
else if (clk_counter != 0)
clk_counter <= 1'b0;
else if (bus_request)
clk_counter <= (pipe_req);
else if ((maintenance)||(!o_qspi_cs_n && o_wb_stall))
clk_counter <= 1'b1;
always @(*)
begin
ckpre = (clk_counter == 1);
ckstb = (clk_counter == 0);
ckpos = (clk_counter == 1);
ckneg = (clk_counter == 0);
end
end else begin : CKSTB_GEN
reg [CKDV_BITS-1:0] clk_counter;
initial clk_counter = OPT_CLKDIV;
always @(posedge i_clk)
if (i_reset)
clk_counter <= OPT_CLKDIV;
else if (clk_counter != 0)
clk_counter <= clk_counter - 1;
else if (bus_request)
clk_counter <= (pipe_req ? OPT_CLKDIV : 0);
else if ((maintenance)||(!o_qspi_cs_n && o_wb_stall))
clk_counter <= OPT_CLKDIV;
initial ckpre = (OPT_CLKDIV == 1);
initial ckstb = 1'b0;
initial ckpos = (OPT_CLKDIV == 1);
always @(posedge i_clk)
if (i_reset)
begin
ckpre <= (OPT_CLKDIV == 1);
ckstb <= 1'b0;
ckpos <= (OPT_CLKDIV == 1);
end else // if (OPT_CLKDIV > 1)
begin
ckpre <= (clk_counter == 2);
ckstb <= (clk_counter == 1);
ckpos <= (clk_counter == (OPT_CLKDIV+1)/2+1);
end
always @(*)
ckneg = ckstb;
`ifdef FORMAL
always @(*)
assert(!ckpos || !ckneg);
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(i_reset))&&($past(ckpre)))
assert(ckstb);
`endif
end endgenerate
//
//
// Maintenance / startup portion
//
//
generate if (OPT_STARTUP)
begin : GEN_STARTUP
localparam M_WAITBIT=10;
localparam M_LGADDR=5;
`ifdef FORMAL
// For formal, jump into the middle of the startup
localparam M_FIRSTIDX=9;
`else
localparam M_FIRSTIDX=0;
`endif
reg [M_WAITBIT:0] m_this_word;
reg [M_WAITBIT:0] m_cmd_word [0:(1<<M_LGADDR)-1];
reg [M_LGADDR-1:0] m_cmd_index;
reg [M_WAITBIT-1:0] m_counter;
reg m_midcount;
reg [3:0] m_bitcount;
reg [7:0] m_byte;
// Let's script our startup with a series of commands.
// These commands are specific to the Micron Serial NOR flash
// memory that was on the original Arty A7 board. Switching
// from one memory to another should only require adjustments
// to this startup sequence, and to the flashdrvr.cpp module
// found in sw/host.
//
// The format of the data words is ...
// 1'bit (MSB) to indicate this is a counter word.
// Counter words count a number of idle cycles,
// in which the port is unused (CSN is high)
//
// 2'bit mode. This is either ...
// NORMAL_SPI, for a normal SPI interaction:
// MOSI, MISO, WPn and HOLD
// QUAD_READ, all four pins set as inputs. In this
// startup, the input values will be
// ignored.
// or QUAD_WRITE, all four pins are outputs. This is
// important for getting the flash into
// an XIP mode that we can then use for
// all reads following.
//
// 8'bit data To be sent 1-bit at a time in NORMAL_SPI
// mode, or 4-bits at a time in QUAD_WRITE
// mode. Ignored otherwis
//
integer k;
initial
// if (OPT_STARTUP_FILE)
// $readmemh(OPT_STARTUP_FILE, m_cmd_word); else
begin
for(k=0; k<(1<<M_LGADDR); k=k+1)
m_cmd_word[k] = -1;
// cmd_word= m_ctr_flag, m_mod[1:0],
// m_cs_n, m_clk, m_data[3:0]
// Start off idle
// This is really redundant since all of our commands are
// idle's.
m_cmd_word[5'h07] = -1;
//
// Since we don't know what mode we started in, whether the
// device was left in XIP mode or some other mode, we'll start
// by exiting any mode we might have been in.
//
// The key to doing this is to issue a non-command, that can
// also be interpreted as an XIP address with an incorrect
// mode bit. That will get us out of any XIP mode, and back
// into a SPI mode we might use. The command is issued in
// NORMAL_SPI mode, however, since we don't know if the device
// is initially in XIP or not.
//
// Exit any QSPI mode we might've been in
m_cmd_word[5'h08] = { 1'b0, NORMAL_SPI, 8'hff }; // Addr 1
m_cmd_word[5'h09] = { 1'b0, NORMAL_SPI, 8'hff }; // Addr 2
m_cmd_word[5'h0a] = { 1'b0, NORMAL_SPI, 8'hff }; // Addr 2
// Idle
m_cmd_word[5'h0b] = { 1'b1, 10'h3f };
//
// Write configuration register
//
// The write enable must come first: 06
// m_cmd_word[5'h0c] = { 1'b0, NORMAL_SPI, 8'h06 };
m_cmd_word[5'h0c] = { 1'b0, NORMAL_SPI, 8'h50 };
//
// Idle
m_cmd_word[5'h0d] = { 1'b1, 10'h3ff };
//
// Write configuration register, follows a write-register
m_cmd_word[5'h0e] = { 1'b0, NORMAL_SPI, 8'h01 }; // WRR
m_cmd_word[5'h0f] = { 1'b0, NORMAL_SPI, 8'h00 }; // status register
m_cmd_word[5'h10] = { 1'b0, NORMAL_SPI, 8'h02 }; // Config register
//
// Idle
m_cmd_word[5'h11] = { 1'b1, 10'h3ff };
m_cmd_word[5'h12] = { 1'b1, 10'h3ff };
//
//
// WRDI: write disable: 04
m_cmd_word[5'h13] = { 1'b0, NORMAL_SPI, 8'h04 };
//
// Idle
m_cmd_word[5'h14] = { 1'b1, 10'h3ff };
//
// Enter into QSPI mode, 0xeb, 0,0,0
// 0xeb
m_cmd_word[5'h15] = { 1'b0, NORMAL_SPI, 8'heb };
// Addr #1
m_cmd_word[5'h16] = { 1'b0, QUAD_WRITE, 8'h00 };
// Addr #2
m_cmd_word[5'h17] = { 1'b0, QUAD_WRITE, 8'h00 };
// Addr #3
m_cmd_word[5'h18] = { 1'b0, QUAD_WRITE, 8'h00 };
// Mode byte
m_cmd_word[5'h19] = { 1'b0, QUAD_WRITE, 8'ha0 };
// Dummy clocks, x4 for this flash
m_cmd_word[5'h1a] = { 1'b0, QUAD_WRITE, 8'h00 };
m_cmd_word[5'h1b] = { 1'b0, QUAD_WRITE, 8'h00 };
// Now read a byte for form
m_cmd_word[5'h1c] = { 1'b0, QUAD_READ, 8'h00 };
//
// Idle -- These last two idles are *REQUIRED* and not optional
// (although they might be able to be trimmed back a bit...)
m_cmd_word[5'h1d] = -1;
m_cmd_word[5'h1e] = -1;
// Then we are in business!
end
reg m_final;
wire m_ce, new_word;
assign m_ce = (!m_midcount)&&(ckstb);
assign new_word = (m_ce && m_bitcount == 0);
//
initial maintenance = 1'b1;
initial m_cmd_index = M_FIRSTIDX;
always @(posedge i_clk)
if (i_reset)
begin
m_cmd_index <= M_FIRSTIDX;
maintenance <= 1'b1;
end else if (new_word)
begin
maintenance <= (maintenance)&&(!m_final);
if (!(&m_cmd_index))
m_cmd_index <= m_cmd_index + 1'b1;
end
initial m_this_word = -1;
always @(posedge i_clk)
if (new_word)
m_this_word <= m_cmd_word[m_cmd_index];
initial m_final = 1'b0;
always @(posedge i_clk)
if (i_reset)
m_final <= 1'b0;
else if (new_word)
m_final <= (m_final || (&m_cmd_index));
//
// m_midcount .. are we in the middle of a counter/pause?
//
initial m_midcount = 1;
initial m_counter = -1;
always @(posedge i_clk)
if (i_reset)
begin
m_midcount <= 1'b1;
`ifdef FORMAL
m_counter <= 3;
`else
m_counter <= -1;
`endif
end else if (new_word)
begin
m_midcount <= m_this_word[M_WAITBIT]
&& (|m_this_word[M_WAITBIT-1:0]);
if (m_this_word[M_WAITBIT])
begin
m_counter <= m_this_word[M_WAITBIT-1:0];
`ifdef FORMAL
if (m_this_word[M_WAITBIT-1:0] > 3)
m_counter <= 3;
`endif
end
end else begin
m_midcount <= (m_counter > 1);
if (m_counter > 0)
m_counter <= m_counter - 1'b1;
end
initial m_cs_n = 1'b1;
initial m_mod = NORMAL_SPI;
always @(posedge i_clk)
if (i_reset)
begin
m_cs_n <= 1'b1;
m_mod <= NORMAL_SPI;
m_bitcount <= 0;
end else if (ckstb)
begin
if (m_bitcount != 0)
m_bitcount <= m_bitcount - 1;
else if ((m_ce)&&(m_final))
begin
m_cs_n <= 1'b1;
m_mod <= NORMAL_SPI;
m_bitcount <= 0;
end else if ((m_midcount)||(m_this_word[M_WAITBIT]))
begin
m_cs_n <= 1'b1;
m_mod <= NORMAL_SPI;
m_bitcount <= 0;
end else begin
m_cs_n <= 1'b0;
m_mod <= m_this_word[M_WAITBIT-1:M_WAITBIT-2];
m_bitcount <= (!OPT_ODDR && m_cs_n) ? 4'h2 : 4'h1;
if (!m_this_word[M_WAITBIT-1])
m_bitcount <= (!OPT_ODDR && m_cs_n) ? 4'h8 : 4'h7;//i.e.7
end
end
always @(posedge i_clk)
if (m_ce)
begin
if (m_bitcount == 0)
begin
if (!OPT_ODDR && m_cs_n)
begin
m_dat <= {(4){m_this_word[7]}};
m_byte <= m_this_word[7:0];
end else begin
m_dat <= m_this_word[7:4];
m_byte <= { m_this_word[3:0], 4'h0};
if (!m_this_word[M_WAITBIT-1])
begin
// Slow speed
m_dat[0] <= m_this_word[7];
m_byte <= { m_this_word[6:0], 1'b0 };
end
end
end else begin
m_dat <= m_byte[7:4];
m_byte <= { m_byte[3:0], 4'h0 };
if (!m_mod[1])
begin
// Slow speed
m_dat[0] <= m_byte[7];
m_byte <= { m_byte[6:0], 1'b0 };
end else begin
m_byte <= { m_byte[3:0], 4'b00 };
end
end
end
if (OPT_ODDR)
begin
always @(*)
m_clk = !m_cs_n;
end else begin
always @(posedge i_clk)
if (i_reset)
m_clk <= 1'b1;
else if (m_cs_n)
m_clk <= 1'b1;
else if ((!m_clk)&&(ckpos))
m_clk <= 1'b1;
else if (m_midcount)
m_clk <= 1'b1;
else if (new_word && m_this_word[M_WAITBIT])
m_clk <= 1'b1;
else if (ckneg)
m_clk <= 1'b0;
end
`ifdef FORMAL
(* anyconst *) reg [M_LGADDR:0] f_const_addr;
always @(*)
begin
assert((m_cmd_word[f_const_addr][M_WAITBIT])
||(m_cmd_word[f_const_addr][9:8] != 2'b01));
if (m_cmd_word[f_const_addr][M_WAITBIT])
assert(m_cmd_word[f_const_addr][M_WAITBIT-3:0] > 0);
end
always @(*)
begin
if (m_cmd_index != f_const_addr)
assume((m_cmd_word[m_cmd_index][M_WAITBIT])||(m_cmd_word[m_cmd_index][9:8] != 2'b01));
if (m_cmd_word[m_cmd_index][M_WAITBIT])
assume(m_cmd_word[m_cmd_index][M_WAITBIT-3:0]>0);
end
always @(*)
begin
assert((m_this_word[M_WAITBIT])
||(m_this_word[9:8] != 2'b01));
if (m_this_word[M_WAITBIT])
assert(m_this_word[M_WAITBIT-3:0] > 0);
end
// Setting the last two command words to IDLE with maximum
// counts is required by our implementation
always @(*)
assert(m_cmd_word[5'h1e] == 11'h7ff);
always @(*)
assert(m_cmd_word[5'h1f] == 11'h7ff);
wire [M_LGADDR-1:0] last_index;
assign last_index = m_cmd_index - 1;
always @(posedge i_clk)
if ((f_past_valid)&&(m_cmd_index != M_FIRSTIDX))
assert(m_this_word == m_cmd_word[last_index]);
always @(posedge i_clk)
assert(m_midcount == (m_counter != 0));
always @(posedge i_clk)
begin
cover(!maintenance);
cover(m_cmd_index == 5'h0a);
cover(m_cmd_index == 5'h0b);
cover(m_cmd_index == 5'h0c);
cover(m_cmd_index == 5'h0d);
cover(m_cmd_index == 5'h0e);
cover(m_cmd_index == 5'h0f);
cover(m_cmd_index == 5'h10);
cover(m_cmd_index == 5'h11);
cover(m_cmd_index == 5'h12);
cover(m_cmd_index == 5'h13);
cover(m_cmd_index == 5'h14);
cover(m_cmd_index == 5'h15);
cover(m_cmd_index == 5'h16);
cover(m_cmd_index == 5'h17);
cover(m_cmd_index == 5'h18);
cover(m_cmd_index == 5'h19);
cover(m_cmd_index == 5'h1a);
cover(m_cmd_index == 5'h1b);
cover(m_cmd_index == 5'h1c);
cover(m_cmd_index == 5'h1d);
cover(m_cmd_index == 5'h1e);
cover(m_cmd_index == 5'h1f);
end
reg [M_WAITBIT:0] f_last_word;
reg [8:0] f_mspi;
reg [2:0] f_mqspi;
initial f_last_word = -1;
always @(posedge i_clk)
if (i_reset)
f_last_word = -1;
else if (new_word)
f_last_word <= m_this_word;
initial f_mspi = 0;
always @(posedge i_clk)
if (i_reset)
f_mspi <= 0;
else if (ckstb) begin
f_mspi <= f_mspi << 1;
if (maintenance && !m_final && new_word
&&(!m_this_word[M_WAITBIT])
&&(m_this_word[9:8] == NORMAL_SPI))
begin
if (m_cs_n && !OPT_ODDR)
f_mspi[0] <= 1'b1;
else
f_mspi[1] <= 1'b1;
end
end
initial f_mqspi = 0;
always @(posedge i_clk)
if (i_reset)
f_mqspi <= 0;
else if (ckstb) begin
f_mqspi <= f_mqspi << 1;
if (maintenance && !m_final && new_word
&&(!m_this_word[M_WAITBIT])
&&(m_this_word[9]))
begin
if (m_cs_n && !OPT_ODDR)
f_mqspi[0] <= 1'b1;
else
f_mqspi[1] <= 1'b1;
end
end
always @(*)
if (OPT_ODDR)
assert(!f_mspi[0] && !f_mqspi[0]);
always @(*)
if ((|f_mspi) || (|f_mqspi))
begin
assert(maintenance);
assert(!m_cs_n);
assert(m_mod == f_last_word[9:8]);
assert(m_midcount == 1'b0);
end else if (maintenance && o_qspi_cs_n)
begin
assert(f_last_word[M_WAITBIT]);
assert(m_counter <= f_last_word[M_WAITBIT-1:0]);
assert(m_midcount == (m_counter != 0));
assert(m_cs_n);
end
always @(*)
assert((f_mspi == 0)||(f_mqspi == 0));
always @(*)
if (|f_mspi)
assert(m_mod == NORMAL_SPI);
always @(*)
case(f_mspi[8:1])
8'h00: begin end
8'h01: assert(m_dat[0] == f_last_word[7]);
8'h02: assert(m_dat[0] == f_last_word[6]);
8'h04: assert(m_dat[0] == f_last_word[5]);
8'h08: assert(m_dat[0] == f_last_word[4]);
8'h10: assert(m_dat[0] == f_last_word[3]);
8'h20: assert(m_dat[0] == f_last_word[2]);
8'h40: assert(m_dat[0] == f_last_word[1]);
8'h80: assert(m_dat[0] == f_last_word[0]);
default: begin assert(0); end
endcase
always @(*)
if (|f_mqspi)
assert(m_mod == QUAD_WRITE || m_mod == QUAD_READ);
always @(*)
case(f_mqspi[2:1])
2'b00: begin end
2'b01: assert(m_dat[3:0] == f_last_word[7:4]);
2'b10: assert(m_dat[3:0] == f_last_word[3:0]);
default: begin assert(f_mqspi != 2'b11); end
endcase
`endif
end else begin : NO_STARTUP_OPT
always @(*)
begin
maintenance = 0;
m_mod = 2'b00;
m_cs_n = 1'b1;
m_clk = 1'b0;
m_dat = 4'h0;
end
// verilator lint_off UNUSED
wire [8:0] unused_maintenance;
assign unused_maintenance = { maintenance,
m_mod, m_cs_n, m_clk, m_dat };
// verilator lint_on UNUSED
end endgenerate
reg [32+(OPT_ADDR32 ? 8:0)+4*(OPT_ODDR ? 0:1)-1:0] data_pipe;
reg pre_ack = 1'b0;
reg actual_sck;
//
//
// Data / access portion
//
//
initial data_pipe = 0;
always @(posedge i_clk)
begin
if (!o_wb_stall)
begin
// Set the high bits to zero initially
data_pipe <= 0;
data_pipe[8+LGFLASHSZ-1:0] <= {
i_wb_addr, 1'b0, 4'ha, 4'h0 };
if (i_cfg_stb)
// High speed configuration I/O
data_pipe[24+(OPT_ADDR32 ? 8:0) +: 8] <= i_wb_data[7:0];
if ((i_cfg_stb)&&(!i_wb_data[QSPEED_BIT]))
begin // Low speed configuration I/O
data_pipe[28+(OPT_ADDR32 ? 8:0)]<= i_wb_data[7];
data_pipe[24+(OPT_ADDR32 ? 8:0)]<= i_wb_data[6];
end
if (i_cfg_stb)
begin // These can be set independent of speed
data_pipe[20+(OPT_ADDR32 ? 8:0)]<= i_wb_data[5];
data_pipe[16+(OPT_ADDR32 ? 8:0)]<= i_wb_data[4];
data_pipe[12+(OPT_ADDR32 ? 8:0)]<= i_wb_data[3];
data_pipe[ 8+(OPT_ADDR32 ? 8:0)]<= i_wb_data[2];
data_pipe[ 4+(OPT_ADDR32 ? 8:0)]<= i_wb_data[1];
data_pipe[ 0+(OPT_ADDR32 ? 8:0)]<= i_wb_data[0];
end
end else if (ckstb)
data_pipe <= { data_pipe[(32+(OPT_ADDR32 ? 8:0)+4*((OPT_ODDR ? 0:1)-1))-1:0], 4'h0 };
if (maintenance)
data_pipe[28+(OPT_ADDR32 ? 8:0)+4*(OPT_ODDR ? 0:1) +: 4] <= m_dat;
end
assign o_qspi_dat = data_pipe[28+(OPT_ADDR32 ? 8:0)+4*(OPT_ODDR ? 0:1) +: 4];
// Since we can't abort any transaction once started, without
// risking losing XIP mode or any other mode we might be in, we'll
// keep track of whether this operation should be ack'd upon
// completion
always @(posedge i_clk)
if ((i_reset)||(!i_wb_cyc))
pre_ack <= 1'b0;
else if ((bus_request)||(cfg_write))
pre_ack <= 1'b1;
generate if (OPT_PIPE)
begin : OPT_PIPE_BLOCK
reg r_pipe_req;
wire w_pipe_condition;
reg [(AW-1):0] next_addr;
always @(posedge i_clk)
if (!o_wb_stall)
next_addr <= i_wb_addr + 2'd2;
assign w_pipe_condition = (i_wb_stb)&&(!i_wb_we)&&(pre_ack)
&&(!maintenance)
&&(!cfg_mode)
&&(!o_qspi_cs_n)
&&(|clk_ctr[2:0])
&&(next_addr == i_wb_addr);
initial r_pipe_req = 1'b0;
always @(posedge i_clk)
if ((clk_ctr == 1)&&(ckstb))
r_pipe_req <= 1'b0;
else
r_pipe_req <= w_pipe_condition;
assign pipe_req = r_pipe_req;
end else begin
assign pipe_req = 1'b0;
end endgenerate
initial clk_ctr = 0;
always @(posedge i_clk)
if ((i_reset)||(maintenance))
clk_ctr <= 0;
else if ((bus_request)&&(!pipe_req))
// Notice that this is only for
// regular bus reads, and so the check for
// !pipe_req
clk_ctr <= 5'd14 + NDUMMY + (OPT_ADDR32 ? 2:0)+(OPT_ODDR ? 0:1);
else if (bus_request) // && pipe_req
// Otherwise, if this is a piped read, we'll
// reset the counter back to eight.
clk_ctr <= 5'd8;
else if (cfg_ls_write)
clk_ctr <= 5'd8 + ((OPT_ODDR) ? 0:1);
else if (cfg_write)
clk_ctr <= 5'd2 + ((OPT_ODDR) ? 0:1);
else if ((ckstb)&&(|clk_ctr))
clk_ctr <= clk_ctr - 1'b1;
initial o_qspi_sck = (!OPT_ODDR);
always @(posedge i_clk)
if (i_reset)
o_qspi_sck <= (!OPT_ODDR);
else if (maintenance)
o_qspi_sck <= m_clk;
else if ((!OPT_ODDR)&&(bus_request)&&(pipe_req))
o_qspi_sck <= 1'b0;
else if ((bus_request)||(cfg_write))
o_qspi_sck <= 1'b1;
else if (OPT_ODDR)
begin
if ((cfg_mode)&&(clk_ctr <= 1))
// Config mode has no pipe instructions
o_qspi_sck <= 1'b0;
else if (clk_ctr[4:0] > 5'd1)
o_qspi_sck <= 1'b1;
else
o_qspi_sck <= 1'b0;
end else if (((ckpos)&&(!o_qspi_sck))||(o_qspi_cs_n))
begin
o_qspi_sck <= 1'b1;
end else if ((ckneg)&&(o_qspi_sck)) begin
if ((cfg_mode)&&(clk_ctr <= 1))
// Config mode has no pipe instructions
o_qspi_sck <= 1'b1;
else if (clk_ctr[4:0] > 5'd1)
o_qspi_sck <= 1'b0;
else
o_qspi_sck <= 1'b1;
end
initial o_qspi_cs_n = 1'b1;
always @(posedge i_clk)
if (i_reset)
o_qspi_cs_n <= 1'b1;
else if (maintenance)
o_qspi_cs_n <= m_cs_n;
else if ((cfg_stb)&&(i_wb_we))
o_qspi_cs_n <= (!i_wb_data[CFG_MODE])||(i_wb_data[USER_CS_n]);
else if ((OPT_CFG)&&(cfg_cs))
o_qspi_cs_n <= 1'b0;
else if ((bus_request)||(cfg_write))
o_qspi_cs_n <= 1'b0;
else if (ckstb)
o_qspi_cs_n <= (clk_ctr <= 1);
// Control the mode of the external pins
// NORMAL_SPI: i_miso is an input, o_mosi is an output
// QUAD_READ: i_miso is an input, o_mosi is an input
// QUAD_WRITE: i_miso is an output, o_mosi is an output
initial o_qspi_mod = NORMAL_SPI;
always @(posedge i_clk)
if (i_reset)
o_qspi_mod <= NORMAL_SPI;
else if (maintenance)
o_qspi_mod <= m_mod;
else if ((bus_request)&&(!pipe_req))
o_qspi_mod <= QUAD_WRITE;
else if ((bus_request)||(cfg_hs_read))
o_qspi_mod <= QUAD_READ;
else if (cfg_hs_write)
o_qspi_mod <= QUAD_WRITE;
else if ((cfg_ls_write)||((cfg_mode)&&(!cfg_speed)))
o_qspi_mod <= NORMAL_SPI;
else if ((ckstb)&&(clk_ctr <= 5'd9)&&((!cfg_mode)||(!cfg_dir)))
o_qspi_mod <= QUAD_READ;
initial o_wb_stall = 1'b1;
always @(posedge i_clk)
if (i_reset)
o_wb_stall <= 1'b1;
else if (maintenance)
o_wb_stall <= 1'b1;
else if ((RDDELAY > 0)&&((i_cfg_stb)||(i_wb_stb))&&(!o_wb_stall))
o_wb_stall <= 1'b1;
else if ((RDDELAY == 0)&&((cfg_write)||(bus_request)))
o_wb_stall <= 1'b1;
else if (ckstb || clk_ctr == 0)
begin
if (ckpre && (i_wb_stb)&&(pipe_req)&&(clk_ctr == 5'd2))
o_wb_stall <= 1'b0;
else if ((clk_ctr > 1)||(xtra_stall))
o_wb_stall <= 1'b1;
else
o_wb_stall <= 1'b0;
end else if (ckpre && (i_wb_stb)&&(pipe_req)&&(clk_ctr == 5'd1))
o_wb_stall <= 1'b0;
initial dly_ack = 1'b0;
always @(posedge i_clk)
if (i_reset)
dly_ack <= 1'b0;
else if ((ckstb)&&(clk_ctr == 1))
dly_ack <= (i_wb_cyc)&&(pre_ack);
else if ((i_wb_stb)&&(!o_wb_stall)&&(!bus_request))
dly_ack <= 1'b1;
else if (cfg_noop)
dly_ack <= 1'b1;
else
dly_ack <= 1'b0;
generate if (OPT_ODDR)
begin : SCK_ACTUAL
always @(*)
actual_sck = o_qspi_sck;
end else if (OPT_CLKDIV == 1)
begin : SCK_ONE
initial actual_sck = 1'b0;
always @(posedge i_clk)
if (i_reset)
actual_sck <= 1'b0;
else
actual_sck <= (!o_qspi_sck)&&(clk_ctr > 0);
end else begin : SCK_ANY
initial actual_sck = 1'b0;
always @(posedge i_clk)
if (i_reset)
actual_sck <= 1'b0;
else
actual_sck <= (o_qspi_sck)&&(ckpre)&&(clk_ctr > 0);
end endgenerate
`ifdef FORMAL
reg [F_LGDEPTH-1:0] f_extra;
`endif
generate if (RDDELAY == 0)
begin : RDDELAY_NONE
always @(*)
begin
read_sck = actual_sck;
o_wb_ack = dly_ack;
xtra_stall = 1'b0;
end
`ifdef FORMAL
always @(*)
f_extra = 0;
`endif
end else
begin : RDDELAY_NONZERO
reg [RDDELAY-1:0] sck_pipe, ack_pipe, stall_pipe;
reg not_done;
initial sck_pipe = 0;
initial ack_pipe = 0;
initial stall_pipe = -1;
if (RDDELAY > 1)
begin
always @(posedge i_clk)
if (i_reset)
sck_pipe <= 0;
else
sck_pipe <= { sck_pipe[RDDELAY-2:0], actual_sck };
always @(posedge i_clk)
if (i_reset || !i_wb_cyc)
ack_pipe <= 0;
else
ack_pipe <= { ack_pipe[RDDELAY-2:0], dly_ack };
always @(posedge i_clk)
if (i_reset)
stall_pipe <= -1;
else
stall_pipe <= { stall_pipe[RDDELAY-2:0], not_done };
end else // if (RDDELAY > 0)
begin
always @(posedge i_clk)
if (i_reset)
sck_pipe <= 0;
else
sck_pipe <= actual_sck;
always @(posedge i_clk)
if (i_reset || !i_wb_cyc)
ack_pipe <= 0;
else
ack_pipe <= dly_ack;
always @(posedge i_clk)
if (i_reset)
stall_pipe <= -1;
else
stall_pipe <= not_done;
end
always @(*)
begin
not_done = (i_wb_stb || i_cfg_stb) && !o_wb_stall;
if (clk_ctr > 1)
not_done = 1'b1;
if ((clk_ctr == 1)&&(!ckstb))
not_done = 1'b1;
end
always @(*)
o_wb_ack = ack_pipe[RDDELAY-1];
always @(*)
read_sck = sck_pipe[RDDELAY-1];
always @(*)
xtra_stall = |stall_pipe;
`ifdef FORMAL
integer k;
always @(*)
if (!i_wb_cyc)
f_extra = 0;
else begin
f_extra = 0;
for(k=0; k<RDDELAY; k=k+1)
f_extra = f_extra + (ack_pipe[k] ? 1 : 0);
end
`endif // FORMAL
end endgenerate
always @(posedge i_clk)
begin
if (read_sck)
begin
if (OPT_ENDIANSWAP)
begin
if (!o_qspi_mod[1])
begin
o_wb_data <= { o_wb_data[30:24], i_qspi_dat[1],
o_wb_data[22:16], o_wb_data[31],
o_wb_data[14:8], o_wb_data[23],
o_wb_data[6:0], o_wb_data[15] };
end else begin
o_wb_data <= { o_wb_data[27:24], i_qspi_dat,
o_wb_data[19:16], o_wb_data[31:28],
o_wb_data[11:8], o_wb_data[23:20],
o_wb_data[3:0], o_wb_data[15:12]};
end
if (cfg_mode)
begin
// No endian-swapping in config mode
if (!o_qspi_mod[1])
o_wb_data[7:0]<= { o_wb_data[6:0], i_qspi_dat[1] };
else
o_wb_data[7:0]<= { o_wb_data[3:0], i_qspi_dat };
end
end else if (!o_qspi_mod[1])
// No endian-swapping
o_wb_data <= { o_wb_data[30:0], i_qspi_dat[1] };
else
o_wb_data <= { o_wb_data[27:0], i_qspi_dat };
end // read_sck
if ((OPT_CFG)&&(cfg_mode))
o_wb_data[16:8] <= { 4'b0, cfg_mode, cfg_speed, 1'b0,
cfg_dir, cfg_cs };
end
//
//
// User override access
//
//
initial cfg_mode = 1'b0;
always @(posedge i_clk)
if ((i_reset)||(!OPT_CFG))
cfg_mode <= 1'b0;
else if ((i_cfg_stb)&&(!o_wb_stall)&&(i_wb_we))
cfg_mode <= i_wb_data[CFG_MODE];
initial cfg_cs = 1'b0;
always @(posedge i_clk)
if ((i_reset)||(!OPT_CFG))
cfg_cs <= 1'b0;
else if ((i_cfg_stb)&&(!o_wb_stall)&&(i_wb_we))
cfg_cs <= (!i_wb_data[USER_CS_n])&&(i_wb_data[CFG_MODE]);
initial cfg_speed = 1'b0;
initial cfg_dir = 1'b0;
always @(posedge i_clk)
if (!OPT_CFG)
begin
cfg_speed <= 1'b0;
cfg_dir <= 1'b0;
end else if ((i_cfg_stb)&&(!o_wb_stall)&&(i_wb_we))
begin
cfg_speed <= i_wb_data[QSPEED_BIT];
cfg_dir <= i_wb_data[DIR_BIT];
end
/*
reg r_last_cfg;
initial r_last_cfg = 1'b0;
always @(posedge i_clk)
r_last_cfg <= cfg_mode;
assign o_dbg_trigger = (!cfg_mode)&&(r_last_cfg);
assign o_debug = { o_dbg_trigger,
i_wb_cyc, i_cfg_stb, i_wb_stb, o_wb_ack, o_wb_stall,//6
o_qspi_cs_n, o_qspi_sck, o_qspi_dat, o_qspi_mod,// 8
i_qspi_dat, cfg_mode, cfg_cs, cfg_speed, cfg_dir,// 8
actual_sck, i_wb_we,
(((i_wb_stb)||(i_cfg_stb))
&&(i_wb_we)&&(!o_wb_stall)&&(!o_wb_ack))
? i_wb_data[7:0] : o_wb_data[7:0]
};
*/
// verilator lint_off UNUSED
wire [19:0] unused;
assign unused = { i_wb_data[31:12] };
// verilator lint_on UNUSED
`ifdef FORMAL
localparam F_MEMDONE = NDUMMY+6+8+(OPT_ADDR32 ? 2:0)+(OPT_ODDR ? 0:1);
localparam F_MEMACK = F_MEMDONE + RDDELAY;
localparam F_PIPEDONE = 8;
localparam F_PIPEACK = F_PIPEDONE + RDDELAY;
localparam F_CFGLSDONE = 8+(OPT_ODDR ? 0:1);
localparam F_CFGLSACK = F_CFGLSDONE + RDDELAY;
localparam F_CFGHSDONE = 2+(OPT_ODDR ? 0:1);
localparam F_CFGHSACK = RDDELAY+F_CFGHSDONE;
localparam F_ACKCOUNT = (15+NDUMMY+RDDELAY)
*(OPT_ODDR ? 1 : (OPT_CLKDIV+1));
genvar k;
wire [(F_LGDEPTH-1):0] f_nreqs, f_nacks,
f_outstanding;
reg [(AW-1):0] f_req_addr;
reg [(OPT_ADDR32 ? 29:21):0] fv_addr;
reg [31:0] fv_data;
reg [F_MEMACK:0] f_memread;
reg [32:0] f_past_data;
reg [F_PIPEACK:0] f_piperead;
reg [F_CFGHSACK:0] f_cfghsread;
reg [F_CFGHSACK:0] f_cfghswrite;
reg [F_CFGLSACK:0] f_cfglswrite;
//
//
// Generic setup
//
//
`ifdef QFLEXPRESS
`define ASSUME assume
`else
`define ASSUME assert
`endif
// Keep track of a flag telling us whether or not $past()
// will return valid results
initial f_past_valid = 1'b0;
always @(posedge i_clk)
f_past_valid = 1'b1;
always @(*)
if (!f_past_valid)
`ASSUME(i_reset);
/////////////////////////////////////////////////
//
//
// Assumptions about our inputs
//
//
/////////////////////////////////////////////////
always @(*)
`ASSUME((!i_wb_stb)||(!i_cfg_stb));
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(i_reset))
&&($past(i_wb_stb))&&($past(o_wb_stall)))
`ASSUME(i_wb_stb);
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(i_reset))
&&($past(i_cfg_stb))&&($past(o_wb_stall)))
`ASSUME(i_cfg_stb);
fwb_slave #(.AW(AW), .DW(DW),.F_LGDEPTH(F_LGDEPTH),
.F_MAX_STALL(((OPT_CLKDIV<3) ? (F_ACKCOUNT+1):0)
+(OPT_ADDR32 ? 2:0)),
.F_MAX_ACK_DELAY(((OPT_CLKDIV<3) ? F_ACKCOUNT : 0)
+(OPT_ADDR32 ? 2:0)),
.F_OPT_RMW_BUS_OPTION(0),
.F_OPT_CLK2FFLOGIC(1'b0),
.F_OPT_DISCONTINUOUS(1))
f_wbm(i_clk, i_reset,
i_wb_cyc, (i_wb_stb)||(i_cfg_stb), i_wb_we, i_wb_addr,
i_wb_data, 4'hf,
o_wb_ack, o_wb_stall, o_wb_data, 1'b0,
f_nreqs, f_nacks, f_outstanding);
always @(*)
assert(f_outstanding <= 2 + f_extra);
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(i_wb_stb))||($past(o_wb_stall)))
assert(f_outstanding <= 1 + f_extra);
////////////////////////////////////////////////////////////////////////
//
// Assumptions about i_qspi_dat
//
// 1. On output, i_qspi_dat equals the input
// 2. Otherwise when implementing multi-cycle clocks, i_qspi_dat only
// changes on a negative edge
//
(* anyseq *) reg [3:0] dly_idat;
always @(posedge i_clk)
if (o_qspi_mod == NORMAL_SPI)
begin
assume(dly_idat[3:2] == 2'b11);
assume(dly_idat[0] == o_qspi_dat[0]);
if ((!OPT_ODDR)&&((o_qspi_sck)||(!$past(o_qspi_sck))))
assume($stable(dly_idat[1]));
end else if (o_qspi_mod == QUAD_WRITE)
assume(dly_idat == o_qspi_dat);
else if ((!OPT_ODDR)&&((o_qspi_sck)||(!$past(o_qspi_sck))))
assume($stable(dly_idat));
generate if (RDDELAY > 0)
begin
always @(posedge i_clk)
assume(i_qspi_dat == $past(dly_idat,RDDELAY));
end else begin
always @(posedge i_clk)
assume(i_qspi_dat == dly_idat);
end endgenerate
//
////////////////////////////////////////////////////////////////////////
//
// Maintenance mode assertions
//
always @(*)
if (maintenance)
begin
assume((!i_wb_stb)&&(!i_cfg_stb));
assert(f_outstanding == 0);
assert(o_wb_stall);
//
assert(clk_ctr == 0);
assert(cfg_mode == 1'b0);
end
always @(*)
if (maintenance)
begin
assert(clk_ctr == 0);
assert(!o_wb_ack);
end
////////////////////////////////////////////////////////////////////////
//
//
//
always @(posedge i_clk)
if (dly_ack)
assert(clk_ctr[2:0] == 0);
// Zero cycle requests
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(i_reset))&&(($past(cfg_noop))
||($past(i_wb_stb && i_wb_we && !o_wb_stall))))
assert((dly_ack)&&((!i_wb_cyc)
||(f_outstanding == 1 + f_extra)));
always @(posedge i_clk)
if ((f_outstanding > 0)&&(clk_ctr > 0))
assert(pre_ack);
always @(posedge i_clk)
if ((i_wb_cyc)&&(dly_ack))
assert(f_outstanding >= 1 + f_extra);
always @(posedge i_clk)
if ((f_past_valid)&&(clk_ctr == 0)&&(!dly_ack)
&&((!$past(i_wb_stb|i_cfg_stb))||($past(o_wb_stall))))
assert(f_outstanding == f_extra);
always @(*)
if ((i_wb_cyc)&&(pre_ack)&&(!o_qspi_cs_n))
assert((f_outstanding >= 1 + f_extra)||((OPT_CFG)&&(cfg_mode)));
always @(*)
if ((cfg_mode)&&(!dly_ack)&&(clk_ctr == 0))
assert(f_outstanding == f_extra);
always @(*)
if (cfg_mode)
assert(f_outstanding <= 1 + f_extra);
/////////////////
//
// Idle channel
//
/////////////////
always @(*)
if (!maintenance)
begin
if (o_qspi_cs_n)
begin
assert(clk_ctr == 0);
assert(o_qspi_sck == !OPT_ODDR);
end else if (clk_ctr == 0)
assert(o_qspi_sck == !OPT_ODDR);
end
always @(*)
assert(o_qspi_mod != 2'b01);
always @(*)
if (clk_ctr > (5'h8 * (1+OPT_CLKDIV)))
begin
assert(!cfg_mode);
assert(!cfg_cs);
end
always @(posedge i_clk)
if ((OPT_CLKDIV==1)&&(!o_qspi_cs_n)&&(!$past(o_qspi_cs_n))
&&(!$past(o_qspi_cs_n,2))&&(!cfg_mode))
assert(o_qspi_sck != $past(o_qspi_sck));
/////////////////
//
// Read requests
//
/////////////////
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(i_reset))&&($past(bus_request)))
begin
assert(!o_qspi_cs_n);
if ((OPT_ODDR)||(!$past(pipe_req)))
assert(o_qspi_sck == 1'b1);
else
assert(o_qspi_sck == 1'b0);
//
if (!$past(o_qspi_cs_n))
begin
assert(clk_ctr == 5'd8);
assert(o_qspi_mod == QUAD_READ);
end else begin
assert(clk_ctr == 5'd14 + NDUMMY
+ (OPT_ADDR32 ? 2:0) + (OPT_ODDR ? 0:1));
assert(o_qspi_mod == QUAD_WRITE);
end
end
always @(*)
assert(clk_ctr <= 5'd18 + NDUMMY + (OPT_ODDR ? 0:1));
always @(*)
if ((OPT_ODDR)&&(!o_qspi_cs_n))
assert((o_qspi_sck)||(actual_sck)||(cfg_mode)||(maintenance));
always @(*)
if ((RDDELAY == 0)&&((dly_ack)&&(clk_ctr == 0)))
assert(!o_wb_stall);
always @(*)
if (!maintenance)
begin
if (cfg_mode)
begin
if (!cfg_cs)
assert(o_qspi_cs_n);
else if (!cfg_speed)
assert(o_qspi_mod == NORMAL_SPI);
else if ((cfg_dir)&&(clk_ctr > 0))
assert(o_qspi_mod == QUAD_WRITE);
end else if (clk_ctr > 5'd8)
assert(o_qspi_mod == QUAD_WRITE);
else if (clk_ctr > 0)
assert(o_qspi_mod == QUAD_READ);
end
always @(posedge i_clk)
if (((!OPT_PIPE)&&(clk_ctr != 0))||(clk_ctr > 5'd1))
assert(o_wb_stall);
always @(posedge i_clk)
if ((OPT_CLKDIV>0)&&($past(o_qspi_cs_n)))
assert(o_qspi_sck);
/////////////////
//
// User mode
//
/////////////////
always @(*)
if ((maintenance)||(!OPT_CFG))
assert(!cfg_mode);
always @(*)
if ((OPT_CFG)&&(cfg_mode))
assert(o_qspi_cs_n == !cfg_cs);
else
assert(!cfg_cs);
//
//
//
//
always @(posedge i_clk)
if (bus_request)
begin
// Make sure all of the bits are set
fv_addr <= 0;
// Now set as many bits as we have address bits
fv_addr[AW-1:0] <= i_wb_addr;
end
always @(posedge i_clk)
if ((i_wb_stb || i_cfg_stb) && !o_wb_stall && i_wb_we)
fv_data <= i_wb_data;
// Memory reads
initial f_memread = 0;
generate if (RDDELAY == 0)
begin
always @(posedge i_clk)
if (i_reset)
f_memread <= 0;
else begin
if (ckstb)
f_memread <= { f_memread[F_MEMACK-1:0],1'b0};
else if (!OPT_ODDR)
f_memread[F_MEMACK] <= 1'b0;
if ((bus_request)&&(o_qspi_cs_n))
f_memread[0] <= 1'b1;
end
end else begin
always @(posedge i_clk)
if (i_reset)
f_memread <= 0;
else begin
if (ckstb)
f_memread <= { f_memread[F_MEMACK-1:0],1'b0};
else if (!OPT_ODDR)
f_memread[F_MEMACK:F_MEMDONE]
<= { f_memread[F_MEMACK-1:F_MEMDONE],1'b0};
if ((bus_request)&&(o_qspi_cs_n))
f_memread[0] <= 1'b1;
end
end endgenerate
always @(posedge i_clk)
if ((OPT_ODDR)&&(|f_memread[F_MEMDONE-1:0]))
assert(o_qspi_sck);
always @(posedge i_clk)
if (|f_memread[6+(OPT_ADDR32 ? 2:0)+(OPT_ODDR ? 0:1):0])
assert(o_qspi_mod == QUAD_WRITE);
else if (|f_memread[(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0) +7 +: NDUMMY])
// begin assert(1); end
begin end
else if (|f_memread)
assert(o_qspi_mod == QUAD_READ);
generate if (RDDELAY > 0)
begin
always @(posedge i_clk)
if ($past(ckpos,RDDELAY))
begin
if ($past(o_qspi_mod,RDDELAY) == NORMAL_SPI)
f_past_data <= { f_past_data[31:0], i_qspi_dat[1] };
else if ($past(o_qspi_mod,RDDELAY) == QUAD_READ)
f_past_data <= { f_past_data[28:0], i_qspi_dat[3:0] };
end
end else begin
always @(posedge i_clk)
if (ckpos)
begin
if (o_qspi_mod == NORMAL_SPI)
f_past_data <= { f_past_data[31:0], i_qspi_dat[1] };
else if (o_qspi_mod == QUAD_READ)
f_past_data <= { f_past_data[28:0], i_qspi_dat[3:0] };
end
end endgenerate
always @(posedge i_clk)
if (|f_memread[(OPT_ODDR ? 0:1) +: 7 + (OPT_ADDR32 ? 2:0)])
begin
if (OPT_ADDR32)
begin
// Eight extra bits of address
if (f_memread[(OPT_ODDR ? 0:1)])
assert(o_qspi_dat== fv_addr[29:26]);
if (f_memread[1 + (OPT_ODDR ? 0:1)])
assert(o_qspi_dat== fv_addr[25:22]);
end
// 6 nibbles of address, one nibble of mode
if (f_memread[(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0)])
assert(o_qspi_dat== fv_addr[21:18]);
if (f_memread[1+(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0)])
assert(o_qspi_dat== fv_addr[17:14]);
if (f_memread[2+(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0)])
assert(o_qspi_dat== fv_addr[13:10]);
if (f_memread[3+(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0)])
assert(o_qspi_dat== fv_addr[ 9: 6]);
if (f_memread[4+(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0)])
assert(o_qspi_dat== fv_addr[ 5: 2]);
if (f_memread[5+(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0)])
assert(o_qspi_dat=={ fv_addr[1:0],2'b00 });
if (f_memread[6+(OPT_ODDR ? 0:1)+(OPT_ADDR32 ? 2:0)])
assert(o_qspi_dat == 4'ha);
end
always @(posedge i_clk)
if (OPT_ODDR)
begin
if (f_memread[F_MEMACK] && OPT_ENDIANSWAP)
begin
assert(o_wb_data[ 7: 4] == $past(i_qspi_dat,8));
assert(o_wb_data[ 3: 0] == $past(i_qspi_dat,7));
assert(o_wb_data[15:12] == $past(i_qspi_dat,6));
assert(o_wb_data[11: 8] == $past(i_qspi_dat,5));
assert(o_wb_data[23:20] == $past(i_qspi_dat,4));
assert(o_wb_data[19:16] == $past(i_qspi_dat,3));
assert(o_wb_data[31:28] == $past(i_qspi_dat,2));
assert(o_wb_data[27:24] == $past(i_qspi_dat,1));
end else if (f_memread[F_MEMACK])
begin
assert(o_wb_data[31:28] == $past(i_qspi_dat,8));
assert(o_wb_data[27:24] == $past(i_qspi_dat,7));
assert(o_wb_data[23:20] == $past(i_qspi_dat,6));
assert(o_wb_data[19:16] == $past(i_qspi_dat,5));
assert(o_wb_data[15:12] == $past(i_qspi_dat,4));
assert(o_wb_data[11: 8] == $past(i_qspi_dat,3));
assert(o_wb_data[ 7: 4] == $past(i_qspi_dat,2));
assert(o_wb_data[ 3: 0] == $past(i_qspi_dat,1));
end else if (|f_memread)
begin
if (!OPT_PIPE)
assert(o_wb_stall);
else if (!f_memread[F_MEMDONE-1])
assert(o_wb_stall);
assert(!o_wb_ack);
end
end else if (f_memread[F_MEMACK] && OPT_ENDIANSWAP)
assert((!o_wb_ack)||(
o_wb_data[ 7: 0] == f_past_data[31:24]
&& o_wb_data[15: 8] == f_past_data[23:16]
&& o_wb_data[23:16] == f_past_data[15: 8]
&& o_wb_data[31:24] == f_past_data[ 7: 0]));
else if (f_memread[F_MEMACK]) // 25
assert((!o_wb_ack)||(o_wb_data == f_past_data[31:0]));
else if (|f_memread)
begin
if ((!OPT_PIPE)||(!ckstb))
assert(o_wb_stall);
else if (!f_memread[F_MEMDONE-1])
assert(o_wb_stall);
assert(!o_wb_ack);
end
always @(posedge i_clk)
if (f_memread[F_MEMDONE])
assert((clk_ctr == 0)||((OPT_PIPE)&&(clk_ctr == F_PIPEDONE)));
// else if (|f_memread[F_MEMDONE-1:0])
// assert(f_memread[F_MEMDONE-clk_ctr]);
generate for(k=0; k<F_MEMACK-1; k=k+1)
begin : ONEHOT_MEMREAD
always @(*)
if (f_memread[k])
assert((f_memread ^ (1<<k)) == 0);
end endgenerate
generate if (RDDELAY == 0)
begin
initial f_piperead = 0;
always @(posedge i_clk)
if ((i_reset)||(!OPT_PIPE))
f_piperead <= 0;
else if (ckstb) begin
f_piperead <= { f_piperead[F_PIPEACK-1:0],1'b0};
f_piperead[0] <= (bus_request)&&(!o_qspi_cs_n);
end else if (!OPT_ODDR)
f_piperead[F_PIPEACK] <= 1'b0;
end else begin
initial f_piperead = 0;
always @(posedge i_clk)
if ((i_reset)||(!OPT_PIPE))
f_piperead <= 0;
else if (ckstb) begin
f_piperead <= { f_piperead[F_PIPEACK-1:0],1'b0};
f_piperead[0] <= (bus_request)&&(!o_qspi_cs_n);
end else if (!OPT_ODDR)
f_piperead[F_PIPEACK:F_PIPEDONE] <= { f_piperead[F_PIPEACK-1:F_PIPEDONE], 1'b0 };
end endgenerate
always @(posedge i_clk)
if (OPT_ODDR)
begin
if (f_piperead[F_PIPEACK] && OPT_ENDIANSWAP)
begin
assert(o_wb_data[ 7: 4] == $past(i_qspi_dat,8));
assert(o_wb_data[ 3: 0] == $past(i_qspi_dat,7));
assert(o_wb_data[15:12] == $past(i_qspi_dat,6));
assert(o_wb_data[11: 8] == $past(i_qspi_dat,5));
assert(o_wb_data[23:20] == $past(i_qspi_dat,4));
assert(o_wb_data[19:16] == $past(i_qspi_dat,3));
assert(o_wb_data[31:28] == $past(i_qspi_dat,2));
assert(o_wb_data[27:24] == $past(i_qspi_dat,1));
end else if (f_piperead[F_PIPEACK])
begin
assert(o_wb_data[31:28] == $past(i_qspi_dat,8));
assert(o_wb_data[27:24] == $past(i_qspi_dat,7));
assert(o_wb_data[23:20] == $past(i_qspi_dat,6));
assert(o_wb_data[19:16] == $past(i_qspi_dat,5));
assert(o_wb_data[15:12] == $past(i_qspi_dat,4));
assert(o_wb_data[11: 8] == $past(i_qspi_dat,3));
assert(o_wb_data[ 7: 4] == $past(i_qspi_dat,2));
assert(o_wb_data[ 3: 0] == $past(i_qspi_dat));
end else if ((|f_piperead)&&(!f_piperead[RDDELAY]))
assert(!o_wb_ack);
end else if (f_piperead[F_PIPEACK] && OPT_ENDIANSWAP)
begin
assert((!o_wb_ack)||(
o_wb_data[ 7: 0] == f_past_data[31:24]
&& o_wb_data[15: 8] == f_past_data[23:16]
&& o_wb_data[23:16] == f_past_data[15: 8]
&& o_wb_data[31:24] == f_past_data[ 7: 0]));
end else if (f_piperead[F_PIPEACK]) // 25
assert((!o_wb_ack)||(o_wb_data == f_past_data[31:0]));
else if (|f_piperead)
begin
if ((!OPT_PIPE)||(!ckstb))
assert(o_wb_stall);
else if (!f_piperead[F_PIPEDONE-1])
assert(o_wb_stall);
if (!f_memread[F_MEMACK])
assert(!o_wb_ack);
end
always @(posedge i_clk)
if (f_piperead[F_PIPEDONE])
assert(clk_ctr == 0 || clk_ctr == F_PIPEDONE);
else if (|f_piperead[F_PIPEDONE-1:0])
assert(f_piperead[F_PIPEDONE-clk_ctr]);
always @(*)
if (i_cfg_stb && !o_wb_stall)
begin
assert(|{ cfg_noop, cfg_hs_write, cfg_hs_read, cfg_ls_write });
if (cfg_noop)
assert({ cfg_hs_write, cfg_hs_read, cfg_ls_write }==0);
else if (cfg_hs_write)
assert({ cfg_hs_read, cfg_ls_write }==0);
else if (cfg_hs_read)
assert({ cfg_ls_write }==0);
end
////////////////////////////////////////////////////////////////////////
//
// Lowspeed config write
//
initial f_cfglswrite = 0;
always @(posedge i_clk)
if (i_reset)
f_cfglswrite <= 0;
else begin
if (ckstb)
f_cfglswrite <= { f_cfglswrite[F_CFGLSACK-1:0], 1'b0 };
else if (!OPT_ODDR)
f_cfglswrite[F_CFGLSACK:F_CFGLSDONE]
<= { f_cfglswrite[F_CFGLSACK:F_CFGLSDONE],1'b0 };
if (cfg_ls_write)
f_cfglswrite[0] <= 1'b1;
end
always @(*)
if (OPT_ODDR)
begin
if (|f_cfglswrite[7:0])
assert(o_qspi_sck);
else if (|f_cfglswrite)
assert(!o_qspi_sck);
end
always @(posedge i_clk)
if (|f_cfglswrite[7:0])
begin
assert(!dly_ack);
if (f_cfglswrite[F_CFGLSDONE-8])
begin
assert(o_qspi_dat[0] == fv_data[7]);
assert(clk_ctr == 8);
end
if (f_cfglswrite[F_CFGLSDONE-7])
begin
assert(o_qspi_dat[0] == fv_data[6]);
assert(clk_ctr == 7);
end
if (f_cfglswrite[F_CFGLSDONE-6])
begin
assert(o_qspi_dat[0] == fv_data[5]);
assert(clk_ctr == 6);
end
if (f_cfglswrite[F_CFGLSDONE-5])
begin
assert(o_qspi_dat[0] == fv_data[4]);
assert(clk_ctr == 5);
end
if (f_cfglswrite[F_CFGLSDONE-4])
begin
assert(o_qspi_dat[0] == fv_data[3]);
assert(clk_ctr == 4);
end
if (f_cfglswrite[F_CFGLSDONE-3])
begin
assert(o_qspi_dat[0] == fv_data[2]);
assert(clk_ctr == 3);
end
if (f_cfglswrite[F_CFGLSDONE-2])
begin
assert(o_qspi_dat[0] == fv_data[1]);
assert(clk_ctr == 2);
end
if (f_cfglswrite[F_CFGLSDONE-1])
begin
assert(o_qspi_dat[0] == fv_data[0]);
assert(clk_ctr == 1);
end
end
always @(posedge i_clk)
if (|f_cfglswrite)
begin
assert(!o_qspi_cs_n);
assert(o_qspi_mod == NORMAL_SPI);
end
always @(posedge i_clk)
if (|f_cfglswrite[F_CFGLSACK:F_CFGLSDONE])
assert(o_qspi_sck == !OPT_ODDR);
always @(posedge i_clk)
if ((OPT_ODDR)&&(f_cfglswrite[F_CFGLSACK]))
begin
assert((o_wb_ack)||(!$past(pre_ack))||(!$past(i_wb_cyc)));
assert(o_wb_data[7] == $past(i_qspi_dat[1],8));
assert(o_wb_data[6] == $past(i_qspi_dat[1],7));
assert(o_wb_data[5] == $past(i_qspi_dat[1],6));
assert(o_wb_data[4] == $past(i_qspi_dat[1],5));
assert(o_wb_data[3] == $past(i_qspi_dat[1],4));
assert(o_wb_data[2] == $past(i_qspi_dat[1],3));
assert(o_wb_data[1] == $past(i_qspi_dat[1],2));
assert(o_wb_data[0] == $past(i_qspi_dat[1],1));
assert(!o_wb_stall);
end else if (f_cfglswrite[F_CFGLSACK])
assert(o_wb_data[7:0] == f_past_data[7:0]);
else if (|f_cfglswrite[F_CFGLSACK-1:0])
assert(o_wb_stall);
////////////////////////////////////////////////////////////////////////
//
// High speed config write
//
generate if (RDDELAY == 0)
begin
initial f_cfghswrite = 0;
always @(posedge i_clk)
if (i_reset)
f_cfghswrite <= 0;
else begin
if (ckstb)
f_cfghswrite <= { f_cfghswrite[F_CFGHSACK-1:0], 1'b0 };
else if (!OPT_ODDR)
f_cfghswrite[F_CFGHSACK] <= 1'b0;
if (cfg_hs_write)
f_cfghswrite[0] <= 1'b1;
end
end else begin
initial f_cfghswrite = 0;
always @(posedge i_clk)
if (i_reset)
f_cfghswrite <= 0;
else begin
if (ckstb)
f_cfghswrite <= { f_cfghswrite[F_CFGHSACK-1:0], 1'b0 };
else if (!OPT_ODDR)
f_cfghswrite[F_CFGHSACK:F_CFGHSDONE]
<= { f_cfghswrite[F_CFGHSACK:F_CFGHSDONE], 1'b0 };
if (cfg_hs_write)
f_cfghswrite[0] <= 1'b1;
end
end endgenerate
always @(*)
if (OPT_ODDR)
begin
if (|f_cfghswrite[F_CFGHSDONE-1:0])
assert(o_qspi_sck);
else if (|f_cfghswrite)
assert(!o_qspi_sck);
end
always @(posedge i_clk)
if ((OPT_ODDR) && (f_cfghswrite[0]))
assert(o_qspi_dat == $past(i_wb_data[7:4]));
else if ((!OPT_ODDR) && (f_cfghswrite[1]))
assert(o_qspi_dat == fv_data[7:4]);
always @(posedge i_clk)
if ((OPT_ODDR)&&f_cfghswrite[1])
assert(o_qspi_dat == $past(i_wb_data[3:0],2));
else if ((!OPT_ODDR) && (f_cfghswrite[2]))
assert(o_qspi_dat == fv_data[3:0]);
always @(posedge i_clk)
if (OPT_ODDR)
begin
if (|f_cfghswrite[F_CFGHSDONE-1:0])
assert(o_qspi_sck);
else if (|f_cfghswrite)
assert(!o_qspi_sck);
end
generate if (RDDELAY > 0)
begin
always @(posedge i_clk)
if (|f_cfghswrite[F_CFGHSACK:F_CFGHSDONE])
assert(!actual_sck);
end endgenerate
always @(posedge i_clk)
if (|f_cfghswrite)
begin
assert(!o_qspi_cs_n);
assert(o_qspi_mod == QUAD_WRITE);
end
always @(posedge i_clk)
if (|f_cfghswrite[1:0])
begin
assert(!dly_ack);
assert(o_wb_stall);
end
always @(posedge i_clk)
if (f_cfghswrite[F_CFGHSACK])
begin
assert((o_wb_ack)||(!$past(pre_ack))||(!$past(i_wb_cyc)));
assert(o_qspi_mod == QUAD_WRITE);
assert(!o_wb_stall);
end else if (|f_cfghswrite)
begin
assert(o_wb_stall);
assert(!o_wb_ack);
end
////////////////////////////////////////////////////////////////////////
//
// High speed config read
//
initial f_cfghsread = 0;
always @(posedge i_clk)
if (i_reset)
f_cfghsread <= 0;
else begin
if (ckstb)
f_cfghsread <= { f_cfghsread[F_CFGHSACK-1:0], 1'b0 };
else if (!OPT_ODDR)
f_cfghsread[F_CFGHSACK:F_CFGHSDONE]
<={f_cfghsread[F_CFGHSACK:F_CFGHSDONE], 1'b0};
if (cfg_hs_read)
f_cfghsread[0] <= 1'b1;
end
always @(*)
if (OPT_ODDR)
begin
if (|f_cfghsread[1:0])
assert(o_qspi_sck);
else if (|f_cfghsread)
assert(!o_qspi_sck);
end
always @(posedge i_clk)
if (|f_cfghsread[F_CFGHSACK:F_CFGHSDONE])
assert(o_qspi_sck == !OPT_ODDR);
always @(*)
if ((!maintenance)&&(o_qspi_cs_n))
assert(!actual_sck);
always @(posedge i_clk)
if (|f_cfghsread[F_CFGHSDONE-1:F_CFGHSDONE-2])
begin
assert(!dly_ack);
assert(!o_qspi_cs_n);
assert(o_qspi_mod == QUAD_READ);
assert(o_wb_stall);
end
generate if (RDDELAY > 0)
begin
always @(posedge i_clk)
if (|f_cfghswrite[F_CFGHSACK:F_CFGHSDONE])
assert(!actual_sck);
end endgenerate
always @(posedge i_clk)
if (f_cfghsread[F_CFGHSACK])
begin
if (OPT_ODDR)
begin
assert(o_wb_data[7:4] == $past(i_qspi_dat[3:0],2));
assert(o_wb_data[3:0] == $past(i_qspi_dat[3:0],1));
end
assert(o_wb_data[7:0] == f_past_data[7:0]);
assert((o_wb_ack)||(!$past(pre_ack))||(!$past(i_wb_cyc)));
assert(o_qspi_mod == QUAD_READ);
assert(!o_wb_stall);
end else if (|f_cfghsread)
begin
assert(o_wb_stall);
assert(!o_wb_ack);
end
////////////////////////////////////////////////////////////////////////
//
// Crossover checks
//
wire f_qspi_not_done, f_qspi_not_ackd, f_qspi_active, f_qspi_ack;
assign f_qspi_not_done =
(|f_memread[F_MEMDONE-1:0])
||(|f_piperead[F_PIPEDONE-1:0])
||(|f_cfglswrite[F_CFGLSDONE-1:0])
||(|f_cfghswrite[F_CFGHSDONE-1:0])
||(|f_cfghsread[F_CFGHSDONE-1:0]);
assign f_qspi_active = (!maintenance)&&(
(|f_memread[F_MEMACK-1:0])
||(|f_piperead[F_PIPEACK-1:0])
||(|f_cfglswrite[F_CFGLSACK-1:0])
||(|f_cfghswrite[F_CFGHSACK-1:0])
||(|f_cfghsread[F_CFGHSACK-1:0]));
assign f_qspi_not_ackd = (!maintenance)&&(!f_qspi_not_done)&&(
(|f_memread[F_MEMACK-1:0])
||(|f_piperead[F_PIPEACK-1:0])
||(|f_cfglswrite[F_CFGLSACK-1:0])
||(|f_cfghswrite[F_CFGHSACK-1:0])
||(|f_cfghsread[F_CFGHSACK-1:0]));
assign f_qspi_ack = (!maintenance)&&
(|f_memread[F_MEMACK:0])
||(|f_piperead[F_PIPEACK:0])
||(|f_cfglswrite[F_CFGLSACK:0])
||(|f_cfghswrite[F_CFGHSACK:0])
||(|f_cfghsread[F_CFGHSACK:0]);
always @(*)
begin
if ((|f_memread[F_MEMDONE:0])||(|f_piperead[F_PIPEDONE:0]))
begin
assert(f_cfglswrite == 0);
assert(f_cfghswrite == 0);
assert(f_cfghsread == 0);
end
if (|f_cfglswrite[F_CFGLSDONE:0])
begin
assert(f_cfghswrite[F_CFGHSDONE:0] == 0);
assert(f_cfghsread[F_CFGHSDONE:0] == 0);
end
if (|f_cfghswrite[F_CFGHSDONE:0])
assert(f_cfghsread[F_CFGHSDONE:0] == 0);
if (maintenance)
begin
assert(f_memread == 0);
assert(f_piperead == 0);
assert(f_cfglswrite == 0);
assert(f_cfghswrite == 0);
assert(f_cfghsread == 0);
end
assert(clk_ctr <= F_MEMDONE);
end
always @(posedge i_clk)
if ((f_past_valid)&&(!f_qspi_ack)&&(!$past(i_reset))
&&(!$past(maintenance)))
begin
assert($stable(o_wb_data[7:0]));
if (!cfg_mode && !$past(cfg_mode)
&& !$past(i_cfg_stb && !o_wb_stall)
&&($past(f_past_valid))
&& !$past(i_cfg_stb && !o_wb_stall,2))
assert($stable(o_wb_data));
end
always @(*)
if (!maintenance && actual_sck)
begin
assert(f_qspi_not_done);
/*
assert((|f_memread[F_MEMDONE:0])
||(|f_piperead[F_PIPEDONE:0])
||(|f_cfglswrite[F_CFGLSDONE:0])
||(|f_cfghswrite[F_CFGHSDONE:0])
||(|f_cfghsread[F_CFGHSDONE:0]));
*/
end
always @(*)
if (!maintenance && !o_qspi_cs_n && !cfg_mode)
begin
assert((|f_memread[F_MEMDONE:0])
||(|f_piperead[F_PIPEDONE:0]));
end else if (!maintenance && cfg_mode)
begin
if ((o_qspi_sck == OPT_ODDR)||(clk_ctr > 0)||(actual_sck))
begin
assert( (|f_cfglswrite[F_CFGLSDONE-1:0])
||(|f_cfghswrite[F_CFGHSDONE-1:0])
||(|f_cfghsread[F_CFGHSDONE-1:0]));
end
end
always @(posedge i_clk)
if (o_wb_ack && !$past((i_wb_stb || i_cfg_stb)&&!o_wb_stall, 1+RDDELAY))
begin
assert(f_memread[F_MEMACK]
|| f_piperead[F_PIPEACK]
|| f_cfglswrite[F_CFGLSACK]
|| f_cfghswrite[F_CFGHSACK]
|| f_cfghsread[F_CFGHSACK]);
end
////////////////////////////////////////////////////////////////////////
//
// Cover Properties
//
////////////////////////////////////////////////////////////////////////
//
// Due to the way the chip starts up, requiring 32k+ maintenance clocks,
// these cover statements are not likely to be hit
generate if (!OPT_STARTUP)
begin
// Why is this generate only if !OPT_STARTUP? For performance
// reasons. The startup sequence can take a great many clocks.
// cover() would never be able to work through all of those
// clocks to find the following examples, and so it would fail.
// By only checking these cover() statements if !OPT_STARTUP,
// we give them an opportunity to succeed
always @(posedge i_clk)
cover(o_wb_ack && f_memread[ F_MEMACK]);
if (OPT_CFG)
begin
always @(posedge i_clk)
begin
cover(cfg_ls_write);
cover(cfg_hs_write);
cover(cfg_hs_read);
cover(|f_cfglswrite);
cover(|f_cfghsread);
cover(|f_cfghswrite);
cover(o_wb_ack && |f_cfglswrite);
cover(o_wb_ack && |f_cfghsread);
cover(o_wb_ack && |f_cfghswrite);
cover(f_cfglswrite[0]);
cover(f_cfghsread[ 0]);
cover(f_cfghswrite[0]);
cover(f_cfglswrite[F_CFGLSACK-2]);
cover(f_cfghsread[ F_CFGHSACK-2]);
cover(f_cfghswrite[F_CFGHSACK-2]);
cover(f_cfglswrite[F_CFGLSACK-1]);
cover(f_cfghsread[ F_CFGHSACK-1]);
cover(f_cfghswrite[F_CFGHSACK-1]);
cover(f_cfglswrite[F_CFGLSACK]);
cover(f_cfghsread[ F_CFGHSACK]);
cover(f_cfghswrite[F_CFGHSACK]);
cover(o_wb_ack && f_cfglswrite[F_CFGLSACK]);
cover(o_wb_ack && f_cfghsread[ F_CFGHSACK]);
cover(o_wb_ack && f_cfghswrite[F_CFGHSACK]);
end
end
if (OPT_PIPE)
begin
always @(posedge i_clk)
cover(o_wb_ack && f_piperead[F_PIPEACK]);
end
//
//
//
always @(posedge i_clk)
cover((o_wb_ack)&&(!cfg_mode));
always @(posedge i_clk)
cover((o_wb_ack)&&(!cfg_mode)&&(!$past(o_qspi_cs_n)));
always @(posedge i_clk)
// Cover a piped transaction
cover((o_wb_ack)&&(!cfg_mode)&&(!o_qspi_cs_n)); //!
always @(posedge i_clk)
cover((o_wb_ack)&&(cfg_mode)&&(cfg_speed));
always @(posedge i_clk)
cover((o_wb_ack)&&(cfg_mode)&&(!cfg_speed)&&(cfg_dir));
always @(posedge i_clk)
cover((o_wb_ack)&&(cfg_mode)&&(!cfg_speed)&&(!cfg_dir));
end else begin
always @(posedge i_clk)
cover(!maintenance);
end endgenerate
`endif
endmodule
Reference in New Issue Copy Permalink