SummerCart64/fw/picorv32/testbench_ez.v

87 lines
2.3 KiB
Coq
Raw Normal View History

2021-08-05 19:50:29 +02:00
// This is free and unencumbered software released into the public domain.
//
// Anyone is free to copy, modify, publish, use, compile, sell, or
// distribute this software, either in source code form or as a compiled
// binary, for any purpose, commercial or non-commercial, and by any
// means.
`timescale 1 ns / 1 ps
module testbench;
reg clk = 1;
reg resetn = 0;
wire trap;
always #5 clk = ~clk;
initial begin
if ($test$plusargs("vcd")) begin
$dumpfile("testbench.vcd");
$dumpvars(0, testbench);
end
repeat (100) @(posedge clk);
resetn <= 1;
repeat (1000) @(posedge clk);
$finish;
end
wire mem_valid;
wire mem_instr;
reg mem_ready;
wire [31:0] mem_addr;
wire [31:0] mem_wdata;
wire [3:0] mem_wstrb;
reg [31:0] mem_rdata;
always @(posedge clk) begin
if (mem_valid && mem_ready) begin
if (mem_instr)
$display("ifetch 0x%08x: 0x%08x", mem_addr, mem_rdata);
else if (mem_wstrb)
$display("write 0x%08x: 0x%08x (wstrb=%b)", mem_addr, mem_wdata, mem_wstrb);
else
$display("read 0x%08x: 0x%08x", mem_addr, mem_rdata);
end
end
picorv32 #(
) uut (
.clk (clk ),
.resetn (resetn ),
.trap (trap ),
.mem_valid (mem_valid ),
.mem_instr (mem_instr ),
.mem_ready (mem_ready ),
.mem_addr (mem_addr ),
.mem_wdata (mem_wdata ),
.mem_wstrb (mem_wstrb ),
.mem_rdata (mem_rdata )
);
reg [31:0] memory [0:255];
initial begin
memory[0] = 32'h 3fc00093; // li x1,1020
memory[1] = 32'h 0000a023; // sw x0,0(x1)
memory[2] = 32'h 0000a103; // loop: lw x2,0(x1)
memory[3] = 32'h 00110113; // addi x2,x2,1
memory[4] = 32'h 0020a023; // sw x2,0(x1)
memory[5] = 32'h ff5ff06f; // j <loop>
end
always @(posedge clk) begin
mem_ready <= 0;
if (mem_valid && !mem_ready) begin
if (mem_addr < 1024) begin
mem_ready <= 1;
mem_rdata <= memory[mem_addr >> 2];
if (mem_wstrb[0]) memory[mem_addr >> 2][ 7: 0] <= mem_wdata[ 7: 0];
if (mem_wstrb[1]) memory[mem_addr >> 2][15: 8] <= mem_wdata[15: 8];
if (mem_wstrb[2]) memory[mem_addr >> 2][23:16] <= mem_wdata[23:16];
if (mem_wstrb[3]) memory[mem_addr >> 2][31:24] <= mem_wdata[31:24];
end
/* add memory-mapped IO here */
end
end
endmodule