mirror of
https://github.com/Polprzewodnikowy/SummerCart64.git
synced 2024-11-21 21:49:15 +01:00
[SC64][DOCS] Added config options documentation
This commit is contained in:
Mateusz Faderewski
parent
53ee18da2c
commit
6f1c320f9d
6
docs/README.md
Normal file
6
docs/README.md
Normal file
@ -0,0 +1,6 @@
|
||||
# SC64 documentation table of contents
|
||||
|
||||
- [Memory map](./memory_map.md)
|
||||
- [Config options](./config_options.md)
|
||||
- [N64 commands](./n64_commands.md)
|
||||
- [USB commands](./usb_commands.md)
|
||||
231
docs/config_options.md
Normal file
231
docs/config_options.md
Normal file
@ -0,0 +1,231 @@
|
||||
- [Supported config options](#supported-config-options)
|
||||
- [`0`: **BOOTLOADER\_SWITCH**](#0-bootloader_switch)
|
||||
- [`1`: **ROM\_WRITE\_ENABLE**](#1-rom_write_enable)
|
||||
- [`2`: **ROM\_SHADOW\_ENABLE**](#2-rom_shadow_enable)
|
||||
- [`3`: **DD\_MODE**](#3-dd_mode)
|
||||
- [`4`: **ISV\_ADDRESS**](#4-isv_address)
|
||||
- [`5`: **BOOT\_MODE**](#5-boot_mode)
|
||||
- [`6`: **SAVE\_TYPE**](#6-save_type)
|
||||
- [`7`: **CIC\_SEED**](#7-cic_seed)
|
||||
- [`8`: **TV\_TYPE**](#8-tv_type)
|
||||
- [`9`: **DD\_SD\_ENABLE**](#9-dd_sd_enable)
|
||||
- [`10`: **DD\_DRIVE\_TYPE**](#10-dd_drive_type)
|
||||
- [`11`: **DD\_DISK\_STATE**](#11-dd_disk_state)
|
||||
- [`12`: **BUTTON\_STATE**](#12-button_state)
|
||||
- [`13`: **BUTTON\_MODE**](#13-button_mode)
|
||||
- [`14`: **ROM\_EXTENDED\_ENABLE**](#14-rom_extended_enable)
|
||||
|
||||
---
|
||||
|
||||
## Supported config options
|
||||
|
||||
SC64 provides simple flashcart configuration by exposing various options settable by both USB and N64 side.
|
||||
All options other than **BOOTLOADER_SWITCH** are preserved on console reset or power cycle.
|
||||
|
||||
| id | name | type | description |
|
||||
| ---- | ----------------------- | ------- | ----------------------------------------------------------------------- |
|
||||
| `0` | **BOOTLOADER_SWITCH** | *bool* | Switches between bootloader and ROM mapping on PI address `0x1000_0000` |
|
||||
| `1` | **ROM_WRITE_ENABLE** | *bool* | Enables write access to ROM section |
|
||||
| `2` | **ROM_SHADOW_ENABLE** | *bool* | Enables overlapping last 128 kiB of ROM section by flash memory |
|
||||
| `3` | **DD_MODE** | *enum* | Enables 64DD register/IPL access |
|
||||
| `4` | **ISV_ADDRESS** | *dword* | Sets IS-Viewer 64 watch address |
|
||||
| `5` | **BOOT_MODE** | *enum* | Controls bootloader behavior |
|
||||
| `6` | **SAVE_TYPE** | *enum* | Sets supported save type |
|
||||
| `7` | **CIC_SEED** | *word* | Sets CIC seed value passed by bootloader to IPL3 |
|
||||
| `8` | **TV_TYPE** | *enum* | Sets TV type value passed by bootloader to IPL3 |
|
||||
| `9` | **DD_SD_ENABLE** | *bool* | Controls 64DD block request passing to USB or SD card |
|
||||
| `10` | **DD_DRIVE_TYPE** | *enum* | Sets 64DD drive type |
|
||||
| `11` | **DD_DISK_STATE** | *enum* | Sets current 64DD disk state |
|
||||
| `12` | **BUTTON_STATE** | *bool* | Gets button press value |
|
||||
| `13` | **BUTTON_MODE** | *enum* | Sets button press behavior |
|
||||
| `14` | **ROM_EXTENDED_ENABLE** | *bool* | Enables access to extended ROM memory located in flash |
|
||||
|
||||
---
|
||||
|
||||
### `0`: **BOOTLOADER_SWITCH**
|
||||
|
||||
type: *bool* | default: `1`
|
||||
|
||||
- `0` - ROM data is mapped on PI address `0x1000_0000`
|
||||
- `1` - Bootloader data is mapped on PI address `0x1000_0000`
|
||||
|
||||
Used internally to remap ROM data after bootloader is loaded.
|
||||
|
||||
---
|
||||
|
||||
### `1`: **ROM_WRITE_ENABLE**
|
||||
|
||||
type: *bool* | default: `0`
|
||||
|
||||
- `0` - ROM write access is disabled
|
||||
- `1` - ROM write access is enabled
|
||||
|
||||
Used by homebrew applications to freely replace data in SDRAM from N64 side.
|
||||
|
||||
---
|
||||
|
||||
### `2`: **ROM_SHADOW_ENABLE**
|
||||
|
||||
type: *bool* | default: `0`
|
||||
|
||||
- `0` - Last 128 kiB of ROM section is mapped to SDRAM
|
||||
- `1` - Last 128 kiB of ROM section is mapped to flash
|
||||
|
||||
Last 128 kiB of SDRAM is shared between ROM data and SRAM/FlashRAM save data.
|
||||
Use this setting for applications requiring all of ROM section space including last 128 kiB.
|
||||
Check [PI memory map](./memory_map.md#pi-memory-map) for more information.
|
||||
|
||||
---
|
||||
|
||||
### `3`: **DD_MODE**
|
||||
|
||||
type: *enum* | default: `0`
|
||||
|
||||
- `0` - 64DD support is disabled
|
||||
- `1` - 64DD registers are mapped on PI address space
|
||||
- `2` - 64DD IPL is mapped on PI address space
|
||||
- `3` - Both 64DD registers and IPL are mapped on PI address space
|
||||
|
||||
Use this config for setting level of 64DD emulation.
|
||||
|
||||
---
|
||||
|
||||
### `4`: **ISV_ADDRESS**
|
||||
|
||||
type: *dword* | default: `0x0000_0000`
|
||||
|
||||
- `0x0000_0000` - IS-Viewer 64 is disabled
|
||||
- `0x0000_0004` to `0x03FF_FFFC` - IS-Viewer 64 is enabled
|
||||
|
||||
Sets IS-Viewer 64 listening address starting from ROM base.
|
||||
For most applications this offset is fixed at `0x03FF_0000`.
|
||||
Address must be 4-byte aligned. Command will return error when setting incorrect value.
|
||||
Small number of games have support for changing this address (for example debug builds of TLoZ: MM).
|
||||
|
||||
---
|
||||
|
||||
### `5`: **BOOT_MODE**
|
||||
|
||||
type: *enum* | default: `0`
|
||||
|
||||
- `0` - Load menu from SD card
|
||||
- `1` - Attempt to boot application loaded in ROM section
|
||||
- `2` - Attempt to boot 64DD IPL
|
||||
- `3` - Direct mode, skips bootloader entirely
|
||||
|
||||
Use this setting to change boot behavior.
|
||||
Value `3` (direct boot) will always keep **BOOTLOADER_SWITCH** option disabled.
|
||||
|
||||
---
|
||||
|
||||
### `6`: **SAVE_TYPE**
|
||||
|
||||
type: *enum* | default: `0`
|
||||
|
||||
- `0` - All saves are disabled
|
||||
- `1` - EEPROM 4 kib save is enabled
|
||||
- `2` - EEPROM 16 kib save is enabled
|
||||
- `3` - SRAM 256 kib save is enabled
|
||||
- `4` - FlashRAM 1 Mib save is enabled
|
||||
- `5` - SRAM 768 kib save is enabled
|
||||
|
||||
Use this setting for selecting save type that will be emulated. Only one save type can be enabled.
|
||||
|
||||
---
|
||||
|
||||
### `7`: **CIC_SEED**
|
||||
|
||||
type: *word* | default: `0xFFFF`
|
||||
|
||||
- `0x0000` to `0x01FF` - Specified CIC seed/version value will be used
|
||||
- `0xFFFF` - CIC seed/version value will be autodetected
|
||||
|
||||
Use this setting to force specific CIC seed/version.
|
||||
Lower 8 bits represents CIC seed and 9th bit represents CIC version.
|
||||
By setting value `0xFFFF` bootloader will try to guess needed values from loaded ROM IPL3.
|
||||
|
||||
---
|
||||
|
||||
### `8`: **TV_TYPE**
|
||||
|
||||
type: *enum* | default: `3`
|
||||
|
||||
- `0` - PAL TV type will be used
|
||||
- `1` - NTSC TV type will be used
|
||||
- `2` - MPAL TV type will be used
|
||||
- `3` - TV type will be autodetected
|
||||
|
||||
Use this setting to force specific TV type.
|
||||
By setting value `3` bootloader will try to guess TV type from loaded ROM header.
|
||||
|
||||
---
|
||||
|
||||
### `9`: **DD_SD_ENABLE**
|
||||
|
||||
type: *bool* | default: `0`
|
||||
|
||||
- `0` - 64DD block requests are passed to USB interface
|
||||
- `1` - 64DD block requests are passed to SD card
|
||||
|
||||
Use this setting to change where 64DD emulation will be passing incoming block R/W requests.
|
||||
For more information about 64DD and USB request passing check [sc64.py](../sw/pc/sc64.py#L636) implementation.
|
||||
|
||||
---
|
||||
|
||||
### `10`: **DD_DRIVE_TYPE**
|
||||
|
||||
type: *enum* | default: `0`
|
||||
|
||||
- `0` - Retail 64DD drive type ID is selected
|
||||
- `1` - Development 64DD drive type ID is selected
|
||||
|
||||
Use this setting to change 64DD drive type emulation.
|
||||
|
||||
---
|
||||
|
||||
### `11`: **DD_DISK_STATE**
|
||||
|
||||
type: *enum* | default: `0`
|
||||
|
||||
- `0` - 64DD disk state is set to ejected
|
||||
- `1` - 64DD disk state is set to inserted
|
||||
- `2` - 64DD disk state is set to changed
|
||||
|
||||
Use this setting to change 64DD current disk state.
|
||||
|
||||
---
|
||||
|
||||
### `12`: **BUTTON_STATE**
|
||||
|
||||
type: *bool* | default: `x` | **read-only**
|
||||
|
||||
- `0` - Button is not pressed
|
||||
- `1` - Button is pressed
|
||||
|
||||
This is special read-only option for getting button press state.
|
||||
Setting this option will return error.
|
||||
|
||||
---
|
||||
|
||||
### `13`: **BUTTON_MODE**
|
||||
|
||||
type: *enum* | default: `0`
|
||||
|
||||
- `0` - Button press does nothing
|
||||
- `1` - Button press raises N64 interrupt
|
||||
- `2` - Button press sends USB packet
|
||||
- `3` - Button press changes 64DD disk
|
||||
|
||||
Use this setting to change button behavior.
|
||||
Regardless of this setting button state can always be checked by reading **BUTTON_STATE** config.
|
||||
|
||||
---
|
||||
|
||||
### `14`: **ROM_EXTENDED_ENABLE**
|
||||
|
||||
type: *bool* | default: `0`
|
||||
|
||||
- `0` - ROM extended PI access is disabled
|
||||
- `1` - ROM extended PI access is enabled
|
||||
|
||||
Use this setting to enable PI access for extended ROM data located inside flash memory.
|
||||
@ -1,3 +1,16 @@
|
||||
- [Internal memory map](#internal-memory-map)
|
||||
- [PI memory map](#pi-memory-map)
|
||||
- [Address decoding limitations](#address-decoding-limitations)
|
||||
- [Flash mapped sections](#flash-mapped-sections)
|
||||
- [SC64 registers](#sc64-registers)
|
||||
- [**STATUS/COMMAND**](#statuscommand)
|
||||
- [**DATA0** and **DATA1**](#data0-and-data1)
|
||||
- [**VERSION**](#version)
|
||||
- [**KEY**](#key)
|
||||
- [Command execution flow](#command-execution-flow)
|
||||
|
||||
---
|
||||
|
||||
## Internal memory map
|
||||
|
||||
This mapping is used internally by FPGA/μC and when accessing flashcart from USB side.
|
||||
@ -59,7 +72,7 @@ For example, setting largest page size then doing 128 kiB read starting from add
|
||||
SC64 registers are available at base address `0x1FFF_0000` (`0x1FFE_0000` + 64 kiB), but are connected to *reg bus*.
|
||||
As a consequence of this design data read by N64 in single transaction will not contain values of SC64 registers at 64 kiB offset.
|
||||
|
||||
### Flash mapped sections are read only
|
||||
### Flash mapped sections
|
||||
|
||||
Due to flash memory timing requirements it's not possible to directly write data from N64 side.
|
||||
Special commands are provided for performing flash erase and program.
|
||||
@ -133,7 +146,7 @@ Value `0xFFFFFFFF` will lock all SC64 registers if flashcart is in unlock state.
|
||||
|
||||
---
|
||||
|
||||
### Command execution flow
|
||||
## Command execution flow
|
||||
|
||||
1. Check if command is already executing by reading `CMD_BUSY` bit in **STATUS/COMMAND** register (optional).
|
||||
2. Write command argument values to **DATA0** and **DATA1** registers, can be skipped if command doesn't require it.
|
||||
|
||||
1
docs/n64_commands.md
Normal file
1
docs/n64_commands.md
Normal file
@ -0,0 +1 @@
|
||||
## N64 commands
|
||||
1
docs/usb_commands.md
Normal file
1
docs/usb_commands.md
Normal file
@ -0,0 +1 @@
|
||||
## USB commands
|
||||
Loading…
Reference in New Issue
Block a user