The-Homebrew-Cloud/SummerCart64
2
0
Fork 0
mirror of https://github.com/Polprzewodnikowy/SummerCart64.git synced 2024-12-25 04:21:56 +01:00
Code Issues Packages Projects Releases Wiki Activity

[SC64][DOCS] Update 06_build_guide.md (#55)

Browse Source 
Add few useful notes.
This commit is contained in:
ottelo 2023-12-14 18:50:30 +01:00 committed by GitHub
parent 73716de8f6
commit fe855c31ae
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
docs/06_build_guide.md
View File

@ -66,12 +66,12 @@ You can skip this step if PCB assembly service was used in previous steps.
**Please read the following instructions carefully before proceeding with programming.**
For initial programming you are going to need a PC and a USB to UART (serial) adapter (3.3V signaling is required).
For initial programming you are going to need a PC and a USB to UART (serial) adapter (3.3V signaling is required, e.g. TTL-232R-3V3).
These steps assume you are using modern Windows OS (version 10 or higher).
As for software, here's list of required applications:
- [FT_PROG](https://ftdichip.com/utilities/#ft_prog) - FTDI FT232H EEPROM programming software
- [Python 3](https://www.python.org/downloads/) with `pip3` - necessary for initial programming script: `primer.py`
- [Python 3](https://www.python.org/downloads/) with `pip3` - necessary for initial programming script: `primer.py` (windows install: check option add python to PATH)
Programming must be done in specific order for `primer.py` script to work correctly.
@ -88,14 +88,14 @@ Your SC64 should be ready for next programming step.
Second, program FPGA, microcontroller and bootloader:
1. Disconnect SC64 board from power (unplug USB-C cable)
2. Connect serial adapter to `TX/RX/GND` pads marked on the PCB
2. Connect serial UART/TTL adapter to `TX/RX/GND` pads marked on the PCB. Cross connection TX -> RX, RX -> TX!
3. Connect serial adapter to the PC
4. Check in device manager which port number `COMx` is assigned to serial adapter
5. Connect SC64 board to the PC with USB-C cable (***IMPORTANT:*** connect it to the same computer as serial adapter)
6. Locate `primer.py` script in root folder
7. Make sure these files are located in the same folder as `primer.py` script: `requirements.txt`, `sc64-firmware-{version}.bin`
8. Run `pip3 install -r requirements.txt` to install required python packages
9. Run `python3 primer.py COMx sc64-firmware-{version}.bin` (replace `COMx` with port located in step **4**)
9. Run `python3 primer.py COMx sc64-firmware-{version}.bin` (replace `COMx` with port located in step **4**). On Windows it's python instead of python3.
10. Follow the instructions on the screen
11. Wait until programming process has finished (**DO NOT STOP PROGRAMMING PROCESS OR DISCONNECT SC64 BOARD FROM PC**, doing so might irrecoverably break programming through UART header and you would need to program FPGA and/or microcontroller with separate dedicated programming interfaces through *Tag-Connect* connector on the PCB)