module sd_dat ( input clk, input reset, sd_scb.dat sd_scb, fifo_bus.fifo fifo_bus, input sd_clk_rising, input sd_clk_falling, inout [3:0] sd_dat ); // Input and output data sampling logic sd_dat_oe; logic [3:0] sd_dat_out; logic [3:0] sd_dat_in; logic sd_dat_oe_data; logic [3:0] sd_dat_data; assign sd_dat = sd_dat_oe ? sd_dat_out : 4'hZ; always_ff @(posedge clk) begin sd_dat_oe <= sd_dat_oe_data; sd_dat_out <= sd_dat_data; sd_dat_in <= sd_dat; end always_ff @(posedge clk) begin sd_scb.card_busy <= !sd_dat_in[0]; end // FIFO logic rx_full; logic rx_almost_full; logic rx_write; logic [7:0] rx_wdata; logic tx_empty; logic tx_almost_empty; logic tx_read; logic [7:0] tx_rdata; fifo_8kb fifo_8kb_rx_inst ( .clk(clk), .reset(reset || sd_scb.dat_fifo_flush), .empty(fifo_bus.rx_empty), .almost_empty(fifo_bus.rx_almost_empty), .read(fifo_bus.rx_read), .rdata(fifo_bus.rx_rdata), .full(rx_full), .almost_full(rx_almost_full), .write(rx_write), .wdata(rx_wdata), .count(sd_scb.rx_count) ); fifo_8kb fifo_8kb_tx_inst ( .clk(clk), .reset(reset || sd_scb.dat_fifo_flush), .empty(tx_empty), .almost_empty(tx_almost_empty), .read(tx_read), .rdata(tx_rdata), .full(fifo_bus.tx_full), .almost_full(fifo_bus.tx_almost_full), .write(fifo_bus.tx_write), .wdata(fifo_bus.tx_wdata), .count(sd_scb.tx_count) ); // DAT state typedef enum bit [2:0] { STATE_IDLE, STATE_RX_WAIT, STATE_RX, STATE_TX_WAIT, STATE_TX, STATE_TX_STATUS_WAIT, STATE_TX_STATUS } e_state; e_state state; e_state next_state; always_ff @(posedge clk) begin if (reset || sd_scb.dat_stop) begin state <= STATE_IDLE; end else begin state <= next_state; end end assign sd_scb.dat_busy = (state != STATE_IDLE); logic [10:0] counter; logic [7:0] blocks_remaining; always_comb begin next_state = state; case (state) STATE_IDLE: begin if (sd_scb.dat_start_read) begin next_state = STATE_RX_WAIT; end if (sd_scb.dat_start_write) begin next_state = STATE_TX_WAIT; end end STATE_RX_WAIT: begin if (sd_clk_rising) begin if (!sd_dat_in[0]) begin next_state = STATE_RX; end end end STATE_RX: begin if (sd_clk_rising) begin if (counter == 11'd1041) begin if (blocks_remaining == 8'd0) begin next_state = STATE_IDLE; end else begin next_state = STATE_RX_WAIT; end end end end STATE_TX_WAIT: begin if (sd_clk_falling) begin if (sd_scb.tx_count >= 11'd512) begin next_state = STATE_TX; end end end STATE_TX: begin if (sd_clk_falling) begin if (counter == 11'd1042) begin next_state = STATE_TX_STATUS_WAIT; end end end STATE_TX_STATUS_WAIT: begin if (sd_clk_rising) begin if (counter == 11'd8) begin next_state = STATE_IDLE; end else if (!sd_dat_in[0]) begin next_state = STATE_TX_STATUS; end end end STATE_TX_STATUS: begin if (sd_clk_rising) begin if (counter == 11'd5) begin if (sd_dat_in[0]) begin if (blocks_remaining == 8'd0) begin next_state = STATE_IDLE; end else begin next_state = STATE_TX_WAIT; end end end end end endcase end // CRC16 units logic crc_reset; logic crc_enable; logic crc_shift; logic [3:0] crc_data; logic [15:0] crc_result [0:3]; sd_crc_16 sd_crc_16_inst_0 ( .clk(clk), .reset(crc_reset), .enable(crc_enable), .shift(crc_shift), .data(crc_data[0]), .result(crc_result[0]) ); sd_crc_16 sd_crc_16_inst_1 ( .clk(clk), .reset(crc_reset), .enable(crc_enable), .shift(crc_shift), .data(crc_data[1]), .result(crc_result[1]) ); sd_crc_16 sd_crc_16_inst_2 ( .clk(clk), .reset(crc_reset), .enable(crc_enable), .shift(crc_shift), .data(crc_data[2]), .result(crc_result[2]) ); sd_crc_16 sd_crc_16_inst_3 ( .clk(clk), .reset(crc_reset), .enable(crc_enable), .shift(crc_shift), .data(crc_data[3]), .result(crc_result[3]) ); // Data shifting logic [7:0] data_shift; logic tx_rdata_valid; assign crc_data = (state == STATE_RX) ? rx_wdata[3:0] : sd_dat_data; always_comb begin tx_read = (state == STATE_TX) && sd_clk_falling && (counter < 11'd1024) && (!counter[0]); end always_ff @(posedge clk) begin rx_write <= 1'b0; tx_rdata_valid <= tx_read; crc_reset <= 1'b0; crc_enable <= 1'b0; crc_shift <= 1'b0; if (reset || sd_scb.dat_stop) begin sd_scb.clock_stop <= 1'b0; sd_dat_oe_data <= 1'b0; sd_dat_data <= 4'hF; end else begin case (state) STATE_IDLE: begin if (sd_scb.dat_start_read || sd_scb.dat_start_write) begin sd_scb.dat_error <= 1'b0; blocks_remaining <= sd_scb.dat_blocks; end end STATE_RX_WAIT: begin if (sd_scb.rx_count <= 11'd512) begin sd_scb.clock_stop <= 1'b0; end if (sd_clk_rising) begin if (!sd_dat_in[0]) begin counter <= 11'd1; crc_reset <= 1'b1; end end end STATE_RX: begin if (sd_clk_rising) begin counter <= counter + 1'd1; rx_wdata <= {rx_wdata[3:0], sd_dat_in}; if (counter <= 11'd1024) begin crc_enable <= 1'b1; if (!counter[0]) begin if (rx_full) begin sd_scb.dat_error <= 1'b1; end else begin rx_write <= 1'b1; end end end else begin crc_shift <= 1'b1; if ({crc_result[3][15], crc_result[2][15], crc_result[1][15], crc_result[0][15]} != sd_dat_in) begin sd_scb.dat_error <= 1'b1; end end if (counter == 11'd1041) begin if ((blocks_remaining > 8'd0) && (sd_scb.rx_count > 11'd512)) begin sd_scb.clock_stop <= 1'b1; end blocks_remaining <= blocks_remaining - 1'd1; end end end STATE_TX_WAIT: begin if (sd_clk_falling) begin if (sd_scb.tx_count >= 11'd512) begin counter <= 11'd0; end end end STATE_TX: begin if (sd_clk_falling) begin counter <= counter + 1'd1; if (counter == 11'd0) begin crc_reset <= 1'b1; sd_dat_oe_data <= 1'b1; sd_dat_data <= 4'h0; end else if (counter <= 11'd1024) begin crc_enable <= 1'b1; {sd_dat_data, data_shift} <= {data_shift, 4'h0}; end else begin crc_shift <= 1'b1; sd_dat_data <= {crc_result[3][15], crc_result[2][15], crc_result[1][15], crc_result[0][15]}; end if (counter == 11'd1042) begin sd_dat_oe_data <= 1'b0; counter <= 11'd0; end end end STATE_TX_STATUS_WAIT: begin if (sd_clk_rising) begin counter <= counter + 1'd1; if (counter == 11'd8) begin sd_scb.dat_error <= 1'b1; end else if (!sd_dat_in[0]) begin counter <= 11'd1; end end end STATE_TX_STATUS: begin if (sd_clk_rising) begin if (counter < 11'd5) begin counter <= counter + 1'd1; end if ((counter == 11'd1) && (sd_dat_in[0] != 1'b0)) begin sd_scb.dat_error <= 1'b1; end if ((counter == 11'd2) && (sd_dat_in[0] != 1'b1)) begin sd_scb.dat_error <= 1'b1; end if ((counter == 11'd3) && (sd_dat_in[0] != 1'b0)) begin sd_scb.dat_error <= 1'b1; end if ((counter == 11'd4) && (sd_dat_in[0] != 1'b1)) begin sd_scb.dat_error <= 1'b1; end if ((counter == 11'd5) && (sd_dat_in[0] == 1'b1)) begin blocks_remaining <= blocks_remaining - 1'd1; end end end endcase end if (tx_rdata_valid) begin data_shift <= tx_rdata; end end endmodule