The-Homebrew-Cloud/SummerCart64
2
0
Fork 0
mirror of https://github.com/Polprzewodnikowy/SummerCart64.git synced 2024-11-22 22:19:14 +01:00
Code Issues Packages Projects Releases Wiki Activity
527160731f
SummerCart64/fw/rtl/external/wbsdram.v
Polprzewodnikowy bc802619d2 [SC64] Initial version
2020-10-08 02:04:42 +02:00

1039 lines
29 KiB
Verilog
Raw Blame History

////////////////////////////////////////////////////////////////////////////////
//
// Filename: wbsdram.v
//
// Project: ArrowZip, a demonstration of the Arrow MAX1000 FPGA board
//
// Purpose: Provide 32-bit wishbone access to the SDRAM memory on a MAX1000
// board. Specifically, on each access, the controller will
// activate an appropriate bank of RAM (the SDRAM has four banks), and
// then issue the read/write command. In the case of walking off the
// bank, the controller will activate the next bank before you get to it.
// Upon concluding any wishbone access, all banks will be precharged and
// returned to idle.
//
// This particular implementation represents a second generation version
// because my first version was too complex. To speed things up, this
// version includes an extra wait state where the wishbone inputs are
// clocked into a flip flop before any action is taken on them.
//
// Creator: Dan Gisselquist, Ph.D.
// Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015-2019, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
// target there if the PDF file isn't present.) If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License: GPL, v3, as defined and found on www.gnu.org,
// http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
`default_nettype none
//
`define DMOD_GETINPUT 1'b0
`define DMOD_PUTOUTPUT 1'b1
`define RAM_OPERATIONAL 2'b00
`define RAM_POWER_UP 2'b01
`define RAM_SET_MODE 2'b10
`define RAM_INITIAL_REFRESH 2'b11
//
module wbsdram(i_clk,
i_wb_cyc, i_wb_stb, i_wb_we, i_wb_addr, i_wb_data, i_wb_sel,
o_wb_ack, o_wb_stall, o_wb_data,
o_ram_cs_n, o_ram_cke, o_ram_ras_n, o_ram_cas_n, o_ram_we_n,
o_ram_bs, o_ram_addr,
o_ram_dmod, i_ram_data, o_ram_data, o_ram_dqm,
o_debug);
parameter RDLY = 6;
localparam NCA=10, NRA=13, AW=(NCA+NRA+2)-1, DW=32;
localparam [NCA-2:0] COL_THRESHOLD = -16;
input wire i_clk;
// Wishbone
// inputs
input wire i_wb_cyc, i_wb_stb, i_wb_we;
input wire [(AW-1):0] i_wb_addr;
input wire [(DW-1):0] i_wb_data;
input wire [(DW/8-1):0] i_wb_sel;
// outputs
output wire o_wb_ack;
output reg o_wb_stall;
output wire [31:0] o_wb_data;
// SDRAM control
output wire o_ram_cke;
output reg o_ram_cs_n,
o_ram_ras_n, o_ram_cas_n, o_ram_we_n;
output reg [1:0] o_ram_bs;
output reg [12:0] o_ram_addr;
output reg o_ram_dmod;
input [15:0] i_ram_data;
output reg [15:0] o_ram_data;
output reg [1:0] o_ram_dqm;
output wire [(DW-1):0] o_debug;
// Calculate some metrics
//
// First, do we *need* a refresh now --- i.e., must we break out of
// whatever we are doing to issue a refresh command?
//
// The step size here must be such that 8192 charges may be done in
// 64 ms. Thus for a clock of:
// ClkRate(MHz) (64ms/1000(ms/s)*ClkRate)/8192
// 100 MHz 781
// 96 MHz 750
// 92 MHz 718
// 88 MHz 687
// 84 MHz 656
// 80 MHz 625
//
// However, since we do two refresh cycles everytime we need a refresh,
// this standard is close to overkill--but we'll use it anyway. At
// some later time we should address this, once we are entirely
// convinced that the memory is otherwise working without failure. Of
// course, at that time, it may no longer be a priority ...
//
reg need_refresh;
reg [9:0] refresh_clk;
wire refresh_cmd;
assign refresh_cmd = (!o_ram_cs_n)&&(!o_ram_ras_n)&&(!o_ram_cas_n)&&(o_ram_we_n);
initial refresh_clk = 0;
always @(posedge i_clk)
begin
if (refresh_cmd)
refresh_clk <= 10'd703; // Make suitable for 90 MHz clk
else if (|refresh_clk)
refresh_clk <= refresh_clk - 10'h1;
end
initial need_refresh = 1'b0;
always @(posedge i_clk)
need_refresh <= (refresh_clk == 10'h00)&&(!refresh_cmd);
reg in_refresh;
reg [2:0] in_refresh_clk;
initial in_refresh_clk = 3'h0;
always @(posedge i_clk)
if (refresh_cmd)
in_refresh_clk <= 3'h6;
else if (|in_refresh_clk)
in_refresh_clk <= in_refresh_clk - 3'h1;
initial in_refresh = 0;
always @(posedge i_clk)
in_refresh <= (in_refresh_clk != 3'h0)||(refresh_cmd);
`ifdef FORMAL
always @(posedge i_clk)
if (in_refresh)
assert((refresh_cmd)||($past(in_refresh_clk) <= 3'h6));
always @(posedge i_clk)
if (in_refresh)
assert(refresh_clk==10'd619+{{(7){1'b0}},in_refresh_clk});
`endif
reg [2:0] bank_active [0:3];
reg [(RDLY-1):0] r_barrell_ack;
reg r_pending;
reg r_we;
reg [(AW-1):0] r_addr;
reg [31:0] r_data;
reg [3:0] r_sel;
reg [(AW-NCA-2):0] bank_row [0:3];
//
// Second, do we *need* a precharge now --- must be break out of
// whatever we are doing to issue a precharge command?
//
// Keep in mind, the number of clocks to wait has to be reduced by
// the amount of time it may take us to go into a precharge state.
// You may also notice that the precharge requirement is tighter
// than this one, so ... perhaps this isn't as required?
//
reg [2:0] clocks_til_idle;
reg [1:0] m_state;
wire bus_cyc;
assign bus_cyc = ((i_wb_cyc)&&(i_wb_stb)&&(!o_wb_stall));
reg nxt_dmod;
// Pre-process pending operations
wire pending;
initial r_pending = 1'b0;
reg [(AW-1):0] fwd_addr;
initial r_addr = 0;
initial fwd_addr = { {(AW-(NCA)){1'b0}}, 1'b1, {(NCA-1){1'b0}} };
always @(posedge i_clk)
begin
fwd_addr[NCA-2:0] <= 0;
if (bus_cyc)
begin
r_pending <= 1'b1;
r_we <= i_wb_we;
r_addr <= i_wb_addr;
r_data <= i_wb_data;
r_sel <= i_wb_sel;
fwd_addr[AW-1:NCA-1]<=i_wb_addr[(AW-1):(NCA-1)] + 1'b1;
end else if ((!o_ram_cs_n)&&(o_ram_ras_n)&&(!o_ram_cas_n))
r_pending <= 1'b0;
else if (!i_wb_cyc)
r_pending <= 1'b0;
end
`ifdef FORMAL
always @(*)
assert(fwd_addr[AW-1:NCA-1] == r_addr[(AW-1):(NCA-1)] + 1'b1);
always @(*)
assert(fwd_addr[NCA-3:0] == 0);
`endif
wire [1:0] wb_bs, r_bs, fwd_bs; // Bank select
assign wb_bs = i_wb_addr[NCA:NCA-1];
assign r_bs = r_addr[NCA:NCA-1];
assign fwd_bs = fwd_addr[NCA:NCA-1];
wire [NRA-1:0] wb_row, r_row, fwd_row;
assign wb_row = i_wb_addr[AW-1:NCA+1];
assign r_row = r_addr[AW-1:NCA+1];
assign fwd_row = fwd_addr[AW-1:NCA+1];
reg r_bank_valid;
initial r_bank_valid = 1'b0;
always @(posedge i_clk)
if (bus_cyc)
r_bank_valid <=((bank_active[wb_bs][2])
&&(bank_row[wb_bs] == wb_row));
else
r_bank_valid <= ((bank_active[r_bs][2])
&&(bank_row[r_bs] == r_row));
reg fwd_bank_valid;
initial fwd_bank_valid = 0;
always @(posedge i_clk)
fwd_bank_valid <= ((bank_active[fwd_bs][2])
&&(bank_row[fwd_bs] == fwd_row));
assign pending = (r_pending)&&(o_wb_stall);
//
//
// Maintenance mode (i.e. startup) wires and logic
reg maintenance_mode;
reg m_ram_cs_n, m_ram_ras_n, m_ram_cas_n, m_ram_we_n, m_ram_dmod;
reg [(NRA-1):0] m_ram_addr;
//
//
//
// Address MAP:
// 22-bits bits in, 23-bits out
//
// 22 1111 1111 1100 0000 0000
// 10 9876 5432 1098 7654 3210
// rr rrrr rrrr rrBB cccc cccc 0
// 8765 4321 0
//
initial r_barrell_ack = 0;
initial clocks_til_idle = 3'h0;
initial o_wb_stall = 1'b1;
initial o_ram_dmod = `DMOD_GETINPUT;
initial nxt_dmod = `DMOD_GETINPUT;
initial o_ram_cs_n = 1'b0;
initial o_ram_ras_n = 1'b1;
initial o_ram_cas_n = 1'b1;
initial o_ram_we_n = 1'b1;
initial o_ram_dqm = 2'b11;
assign o_ram_cke = 1'b1;
initial bank_active[0] = 3'b000;
initial bank_active[1] = 3'b000;
initial bank_active[2] = 3'b000;
initial bank_active[3] = 3'b000;
always @(posedge i_clk)
if (maintenance_mode)
begin
bank_active[0] <= 0;
bank_active[1] <= 0;
bank_active[2] <= 0;
bank_active[3] <= 0;
r_barrell_ack[(RDLY-1):0] <= 0;
o_wb_stall <= 1'b1;
//
o_ram_cs_n <= m_ram_cs_n;
o_ram_ras_n <= m_ram_ras_n;
o_ram_cas_n <= m_ram_cas_n;
o_ram_we_n <= m_ram_we_n;
o_ram_dmod <= m_ram_dmod;
o_ram_addr <= m_ram_addr;
o_ram_bs <= 2'b00;
nxt_dmod <= `DMOD_GETINPUT;
end else begin
o_wb_stall <= (r_pending)||(bus_cyc);
if (!i_wb_cyc)
r_barrell_ack <= 0;
else
r_barrell_ack <= r_barrell_ack >> 1;
nxt_dmod <= `DMOD_GETINPUT;
o_ram_dmod <= nxt_dmod;
//
// We assume that, whatever state the bank is in, that it
// continues in that state and set up a series of shift
// registers to contain that information. If it will not
// continue in that state, all that therefore needs to be
// done is to set bank_active[?][2] below.
//
bank_active[0] <= { bank_active[0][2], bank_active[0][2:1] };
bank_active[1] <= { bank_active[1][2], bank_active[1][2:1] };
bank_active[2] <= { bank_active[2][2], bank_active[2][2:1] };
bank_active[3] <= { bank_active[3][2], bank_active[3][2:1] };
//
o_ram_cs_n <= (!i_wb_cyc);
// o_ram_cke <= 1'b1;
if (|clocks_til_idle[2:0])
clocks_til_idle[2:0] <= clocks_til_idle[2:0] - 3'h1;
// Default command is a
// NOOP if (i_wb_cyc)
// Device deselect if (!i_wb_cyc)
// o_ram_cs_n <= (!i_wb_cyc) above, NOOP
o_ram_ras_n <= 1'b1;
o_ram_cas_n <= 1'b1;
o_ram_we_n <= 1'b1;
// o_ram_data <= r_data[15:0];
if (nxt_dmod)
;
else
if ((!i_wb_cyc)||(need_refresh))
begin // Issue a precharge all command (if any banks are open),
// otherwise an autorefresh command
if ((bank_active[0][2:1]==2'b10)
||(bank_active[1][2:1]==2'b10)
||(bank_active[2][2:1]==2'b10)
||(bank_active[3][2:1]==2'b10)
||(|clocks_til_idle[2:0]))
begin
// Do nothing this clock
// Can't precharge a bank immediately after
// activating it
end else if (bank_active[0][2]
||(bank_active[1][2])
||(bank_active[2][2])
||(bank_active[3][2]))
begin // Close all active banks
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b0;
o_ram_cas_n <= 1'b1;
o_ram_we_n <= 1'b0;
o_ram_addr[10] <= 1'b1;
bank_active[0][2] <= 1'b0;
bank_active[1][2] <= 1'b0;
bank_active[2][2] <= 1'b0;
bank_active[3][2] <= 1'b0;
end else if ((|bank_active[0])
||(|bank_active[1])
||(|bank_active[2])
||(|bank_active[3]))
// Can't precharge yet, the bus is still busy
begin end else if ((!in_refresh)&&((refresh_clk[9:8]==2'b00)||(need_refresh)))
begin // Send autorefresh command
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b0;
o_ram_cas_n <= 1'b0;
o_ram_we_n <= 1'b1;
end // Else just send NOOP's, the default command
end else if (in_refresh)
begin
// NOOPS only here, until we are out of refresh
end else if ((pending)&&(!r_bank_valid)&&(bank_active[r_bs]==3'h0))
begin // Need to activate the requested bank
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b0;
o_ram_cas_n <= 1'b1;
o_ram_we_n <= 1'b1;
o_ram_addr <= r_row;
o_ram_bs <= r_bs;
// clocks_til_idle[2:0] <= 1;
bank_active[r_bs][2] <= 1'b1;
bank_row[r_bs] <= r_row;
//
end else if ((pending)&&(!r_bank_valid)
&&(bank_active[r_bs]==3'b111))
begin // Need to close an active bank
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b0;
o_ram_cas_n <= 1'b1;
o_ram_we_n <= 1'b0;
// o_ram_addr <= r_addr[(AW-1):(NCA+2)];
o_ram_addr[10]<= 1'b0;
o_ram_bs <= r_bs;
// clocks_til_idle[2:0] <= 1;
bank_active[r_bs][2] <= 1'b0;
// bank_row[r_bs] <= r_row;
end else if ((pending)&&(!r_we)
&&(bank_active[r_bs][2])
&&(r_bank_valid)
&&(clocks_til_idle[2:0] < 4))
begin // Issue the read command
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b1;
o_ram_cas_n <= 1'b0;
o_ram_we_n <= 1'b1;
o_ram_addr <= { 4'h0, r_addr[NCA-2:0], 1'b0 };
o_ram_bs <= r_bs;
clocks_til_idle[2:0] <= 4;
o_wb_stall <= 1'b0;
r_barrell_ack[(RDLY-1)] <= 1'b1;
end else if ((pending)&&(r_we)
&&(bank_active[r_bs][2])
&&(r_bank_valid)
&&(clocks_til_idle[2:0] == 0))
begin // Issue the write command
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b1;
o_ram_cas_n <= 1'b0;
o_ram_we_n <= 1'b0;
o_ram_addr <= { 4'h0, r_addr[NCA-2:0], 1'b0 };
o_ram_bs <= r_bs;
clocks_til_idle[2:0] <= 3'h1;
o_wb_stall <= 1'b0;
r_barrell_ack[1] <= 1'b1;
// o_ram_data <= r_data[31:16];
//
o_ram_dmod <= `DMOD_PUTOUTPUT;
nxt_dmod <= `DMOD_PUTOUTPUT;
end else if ((r_pending)&&(r_addr[(NCA-2):0] >= COL_THRESHOLD)
&&(!fwd_bank_valid))
begin
// Do I need to close the next bank I'll need?
if (bank_active[fwd_bs][2:1]==2'b11)
begin // Need to close the bank first
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b0;
o_ram_cas_n <= 1'b1;
o_ram_we_n <= 1'b0;
o_ram_addr[10] <= 1'b0;
o_ram_bs <= fwd_bs;
bank_active[fwd_bs][2] <= 1'b0;
end else if (bank_active[fwd_bs]==0)
begin
// Need to (pre-)activate the next bank
o_ram_cs_n <= 1'b0;
o_ram_ras_n <= 1'b0;
o_ram_cas_n <= 1'b1;
o_ram_we_n <= 1'b1;
o_ram_addr <= fwd_row;
o_ram_bs <= fwd_bs;
// clocks_til_idle[3:0] <= 1;
bank_active[fwd_bs] <= 3'h4;
bank_row[fwd_bs] <= fwd_row;
end
end
if (!i_wb_cyc)
r_barrell_ack <= 0;
end
reg startup_hold;
reg [15:0] startup_idle;
initial startup_idle = 16'd20500;
initial startup_hold = 1'b1;
always @(posedge i_clk)
if (|startup_idle)
startup_idle <= startup_idle - 1'b1;
always @(posedge i_clk)
startup_hold <= |startup_idle;
`ifdef FORMAL
always @(*)
if (startup_hold)
assert(maintenance_mode);
always @(*)
if (|startup_idle)
assert(startup_hold);
`endif
reg [3:0] maintenance_clocks;
reg maintenance_clocks_zero;
initial maintenance_mode = 1'b1;
initial maintenance_clocks = 4'hf;
initial maintenance_clocks_zero = 1'b0;
initial m_ram_addr = { 2'b00, 1'b0, 2'b00, 3'b010, 1'b0, 3'b001 };
initial m_state = `RAM_POWER_UP;
initial m_ram_cs_n = 1'b1;
initial m_ram_ras_n = 1'b1;
initial m_ram_cas_n = 1'b1;
initial m_ram_we_n = 1'b1;
initial m_ram_dmod = `DMOD_GETINPUT;
always @(posedge i_clk)
begin
if (!maintenance_clocks_zero)
begin
maintenance_clocks <= maintenance_clocks - 4'h1;
maintenance_clocks_zero <= (maintenance_clocks == 4'h1);
end
// The only time the RAM address matters is when we set
// the mode. At other times, addr[10] matters, but the rest
// is ignored. Hence ... we'll set it to a constant.
m_ram_addr <= { 2'b00, 1'b0, 2'b00, 3'b010, 1'b0, 3'b001 };
if (m_state == `RAM_POWER_UP)
begin
// All signals must be held in NOOP state during powerup
// m_ram_cke <= 1'b1;
m_ram_cs_n <= 1'b1;
m_ram_ras_n <= 1'b1;
m_ram_cas_n <= 1'b1;
m_ram_we_n <= 1'b1;
m_ram_dmod <= `DMOD_GETINPUT;
if (!startup_hold)
begin
m_state <= `RAM_SET_MODE;
maintenance_clocks <= 4'h3;
maintenance_clocks_zero <= 1'b0;
// Precharge all cmd
m_ram_cs_n <= 1'b0;
m_ram_ras_n <= 1'b0;
m_ram_cas_n <= 1'b1;
m_ram_we_n <= 1'b0;
m_ram_addr[10] <= 1'b1;
end
end else if (m_state == `RAM_SET_MODE)
begin
// Wait
m_ram_cs_n <= 1'b1;
m_ram_cs_n <= 1'b1;
m_ram_ras_n <= 1'b1;
m_ram_cas_n <= 1'b1;
m_ram_we_n <= 1'b1;
m_ram_addr[10] <= 1'b1;
if (maintenance_clocks_zero)
begin
// Set mode cycle
m_ram_cs_n <= 1'b0;
m_ram_ras_n <= 1'b0;
m_ram_cas_n <= 1'b0;
m_ram_we_n <= 1'b0;
m_ram_dmod <= `DMOD_GETINPUT;
m_ram_addr[10] <= 1'b0;
m_state <= `RAM_INITIAL_REFRESH;
maintenance_clocks <= 4'hc;
maintenance_clocks_zero <= 1'b0;
end
end else if (m_state == `RAM_INITIAL_REFRESH)
begin
// Refresh command
if (maintenance_clocks > 4'ha)
// Wait two clocks first
m_ram_cs_n <= 1'b1;
else if (maintenance_clocks > 4'h2)
m_ram_cs_n <= 1'b0;
else
m_ram_cs_n <= 1'b1;
m_ram_ras_n <= 1'b0;
m_ram_cas_n <= 1'b0;
m_ram_we_n <= 1'b1;
m_ram_dmod <= `DMOD_GETINPUT;
// m_ram_addr <= { 3'b000, 1'b0, 2'b00, 3'b010, 1'b0, 3'b001 };
if (maintenance_clocks_zero)
maintenance_mode <= 1'b0;
end
end
always @(posedge i_clk)
if (nxt_dmod)
o_ram_data <= r_data[15:0];
else
o_ram_data <= r_data[31:16];
always @(posedge i_clk)
if (maintenance_mode)
o_ram_dqm <= 2'b11;
else if (r_we)
begin
if (nxt_dmod)
o_ram_dqm <= ~r_sel[1:0];
else
o_ram_dqm <= ~r_sel[3:2];
end else
o_ram_dqm <= 2'b00;
`ifdef VERILATOR
// While I hate to build something that works one way under Verilator
// and another way in practice, this really isn't that. The problem
// \/erilator is having is resolved in toplevel.v---one file that
// \/erilator doesn't implement. In toplevel.v, there's not only a
// single clocked latch but two taking place. Here, we replicate one
// of those. The second takes place (somehow) within the sdramsim.cpp
// file.
reg [15:0] ram_data, last_ram_data;
always @(posedge i_clk)
ram_data <= i_ram_data;
always @(posedge i_clk)
last_ram_data <= ram_data;
assign o_wb_data = { last_ram_data, ram_data };
`else
reg [15:0] last_ram_data;
always @(posedge i_clk)
last_ram_data <= i_ram_data;
assign o_wb_data = { last_ram_data, i_ram_data };
`endif
assign o_wb_ack = r_barrell_ack[0];
//
// The following outputs are not necessary for the functionality of
// the SDRAM, but they can be used to feed an external "scope" to
// get an idea of what the internals of this SDRAM are doing.
//
// Just be aware of the r_we: it is set based upon the currently pending
// transaction, or (if none is pending) based upon the last transaction.
// If you want to capture the first value "written" to the device,
// you'll need to write a nothing value to the device to set r_we.
// The first value "written" to the device can be caught in the next
// interaction after that.
//
reg trigger;
always @(posedge i_clk)
trigger <= ((o_wb_data[15:0]==o_wb_data[31:16])
&&(o_wb_ack)&&(!i_wb_we));
assign o_debug = { i_wb_cyc, i_wb_stb, i_wb_we, o_wb_ack, o_wb_stall, // 5
o_ram_cs_n, o_ram_ras_n, o_ram_cas_n, o_ram_we_n, o_ram_bs,//6
o_ram_dmod, r_pending, // 2
trigger, // 1
o_ram_addr[9:0], // 10 more
(r_we) ? { o_ram_data[7:0] } // 8 values
: { o_wb_data[23:20], o_wb_data[3:0] }
// i_ram_data[7:0]
};
// Make Verilator happy
// verilator lint_off UNUSED
wire [NCA-1:0] unused;
assign unused = { fwd_addr[NCA-1:0] };
// verilator lint_on UNUSED
`ifdef FORMAL
localparam REFRESH_CLOCKS = 6;
localparam ACTIVATE_CLOCKS = 6;
// This device is 23MB, assert such
always @(*)
assert(AW == 21);
always @(*)
assert(NRA+NCA+2 == AW+1);
wire [(5-1):0] f_nreqs, f_nacks, f_outstanding;
reg f_past_valid;
wire f_reset;
always @(*)
if (o_ram_dmod)
assume(i_ram_data == o_ram_data);
initial f_past_valid = 1'b0;
always @(posedge i_clk)
f_past_valid <= 1'b1;
assign f_reset = !f_past_valid;
always @(*)
if (o_ram_dmod)
assert(i_ram_data == o_ram_data);
// Properties
// 1. Wishbone
fwb_slave #( .AW(AW), .DW(DW),
.F_MAX_STALL(ACTIVATE_CLOCKS + REFRESH_CLOCKS
+ ACTIVATE_CLOCKS + RDLY
+ACTIVATE_CLOCKS),
.F_MAX_ACK_DELAY(REFRESH_CLOCKS
+ ACTIVATE_CLOCKS
+ ACTIVATE_CLOCKS
+ ACTIVATE_CLOCKS+RDLY),
.F_LGDEPTH(5))
fwb(i_clk, f_reset,
i_wb_cyc, i_wb_stb, i_wb_we, i_wb_addr,
i_wb_data, i_wb_sel,
o_wb_ack, o_wb_stall, o_wb_data, 1'b0,
f_nreqs, f_nacks, f_outstanding);
// 2. Proper startup ...
// 3. Operation
// 4. Refresh
// 4. SDRAM request == WB request
//
// Once we leave maintenance mode (i.e. startup sequence), we *cannot*
// go back into it.
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(maintenance_mode)))
assert(!maintenance_mode);
// On the very first clock, we must always start up in maintenance mode
always @(posedge i_clk)
if (!f_past_valid)
assert(maintenance_mode);
// Just to make things simpler, assume no accesses to the core during
// maintenance mode. Such accesses might violate our minimum
// acknowledgement time criteria for the wishbone above
always @(posedge i_clk)
if ((f_past_valid)&&(maintenance_mode))
assume(!i_wb_stb);
// Likewise, assert that there are *NO* outstanding transactions in
// this maintenance mode
always @(posedge i_clk)
if ((f_past_valid)&&(maintenance_mode))
assert(f_outstanding == 0);
// ... and that while we are in maintenance mode, any incoming request
// is stalled. This guarantees that our assumptions above are kept
// valid.
always @(posedge i_clk)
if ((f_past_valid)&&(maintenance_mode))
assume(o_wb_stall);
// If there are no attempts to access memory while in maintenance
// mode, then there should never be any pending operations upon
// completion of maintenance mode
always @(posedge i_clk)
if ((f_past_valid)&&(maintenance_mode))
assert(!r_pending);
wire [(2+AW+DW+DW/8-1):0] f_pending, f_request;
assign f_pending = { r_pending, r_we, r_addr, r_data, r_sel };
assign f_request = { i_wb_stb, i_wb_we, i_wb_addr, i_wb_data, i_wb_sel };
always @(posedge i_clk)
if ((f_past_valid)&&($past(r_pending))&&($past(i_wb_cyc))
&&(($past(o_ram_cs_n))
||(!$past(o_ram_ras_n))
||($past(o_ram_cas_n))) )
assert($stable(f_pending));
wire [4:0] f_cmd;
assign f_cmd = { o_ram_addr[10],
o_ram_cs_n, o_ram_ras_n, o_ram_cas_n, o_ram_we_n };
`define F_MODE_SET 5'b?0000
`define F_BANK_PRECHARGE 5'b00010
`define F_PRECHARGE_ALL 5'b10010
`define F_BANK_ACTIVATE 5'b?0011
`define F_WRITE 5'b00100
`define F_READ 5'b00101
`define F_REFRESH 5'b?0001
`define F_NOOP 5'b?0111
`define F_BANK_ACTIVATE_S 4'b0011
`define F_REFRESH_S 4'b0001
`define F_NOOP_S 4'b0111
reg [(AW-1):0] f_next_addr;
always @(*)
begin
f_next_addr = 0;
f_next_addr[(AW-1):NCA-1] = r_addr[(AW-1):NCA-1] + 1'b1;
end
wire [NRA-1:0] f_next_row, f_this_row;
wire [1:0] f_next_bank, f_this_bank;
assign f_next_row = f_next_addr[(AW-1):(NCA+1)];
assign f_next_bank = f_next_addr[NCA:NCA-1];
assign f_this_bank = r_bs;
assign f_this_row = r_row;
always @(*)
if (o_ram_cs_n==1'b0) casez(f_cmd)
`F_MODE_SET: begin end
`F_BANK_PRECHARGE: begin end
`F_PRECHARGE_ALL: begin end
`F_BANK_ACTIVATE: begin end
`F_WRITE: begin end
`F_READ: begin end
`F_REFRESH: begin end
default: assert(f_cmd[3:0] == `F_NOOP_S);
endcase
always @(posedge i_clk)
if ((f_past_valid)&&(!maintenance_mode))
casez(f_cmd)
`F_BANK_ACTIVATE: begin
// Can only activate de-activated banks
assert(bank_active[o_ram_bs][1:0] == 0);
// Need to activate the right bank
if (o_ram_bs == $past(f_this_bank))
assert($past(f_this_row)==o_ram_addr);
else if (o_ram_bs != 0)
begin
assert(o_ram_bs == $past(f_next_bank));
assert($past(f_this_row)==o_ram_addr);
end else begin
assert(o_ram_bs == $past(f_next_bank));
assert($past(f_next_row)==o_ram_addr);
end end
`F_BANK_PRECHARGE: begin
// Can only precharge (de-active) a fully active bank
assert(bank_active[o_ram_bs] == 3'b011);
end
`F_PRECHARGE_ALL: begin
// If pre-charging all, one of the banks must be active and in
// need of a pre-charge
assert(
(bank_active[0] == 3'b011)
||(bank_active[1] == 3'b011)
||(bank_active[2] == 3'b011)
||(bank_active[3] == 3'b011) );
end
`F_WRITE: begin
assert($past(r_we));
assert(bank_active[o_ram_bs] == 3'b111);
assert(bank_row[o_ram_bs] == $past(f_this_row));
assert(o_ram_bs == $past(f_this_bank));
assert(o_ram_addr[0] == 1'b0);
end
`F_READ: begin
assert(!$past(r_we));
assert(bank_active[o_ram_bs] == 3'b111);
assert(bank_row[o_ram_bs] == $past(f_this_row));
assert(o_ram_bs == $past(f_this_bank));
assert(o_ram_addr[0] == 1'b0);
end
`F_REFRESH: begin
// When giving a reset command, *all* banks must be inactive
assert( (bank_active[0] == 3'h0)
&&(bank_active[1] == 3'h0)
&&(bank_active[2] == 3'h0)
&&(bank_active[3] == 3'h0) );
end
default: assert((o_ram_cs_n)||(f_cmd[3:0] == `F_NOOP_S));
endcase
integer f_k;
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(maintenance_mode)))
begin
for(f_k=0; f_k<4; f_k=f_k+1)
if (((f_cmd[3:0] != `F_BANK_ACTIVATE_S))
||(o_ram_bs != f_k[1:0]))
assert($stable(bank_row[f_k[1:0]]));
end
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(maintenance_mode))
&&($past(f_cmd) != `F_READ)
&&($past(f_cmd) != `F_WRITE) )
begin
if (($past(r_pending))&&($past(i_wb_cyc)))
assert($stable(f_pending));
end
always @(posedge i_clk)
if ((f_past_valid)&&(!maintenance_mode))
if ((r_pending)&&(f_cmd != `F_READ)&&(f_cmd != `F_WRITE))
assert(o_wb_stall);
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(maintenance_mode)))
casez($past(f_cmd))
`F_BANK_ACTIVATE: begin
assert(bank_active[$past(o_ram_bs)] == 3'b110);
assert(bank_row[$past(o_ram_bs)] == $past(o_ram_addr));
end
`F_BANK_PRECHARGE: begin
assert(bank_active[$past(o_ram_bs)] == 3'b001);
end
`F_PRECHARGE_ALL: begin
assert(bank_active[0][2] == 1'b0);
assert(bank_active[1][2] == 1'b0);
assert(bank_active[2][2] == 1'b0);
assert(bank_active[3][2] == 1'b0);
end
// `F_WRITE:
// `F_READ:
`F_REFRESH: begin
assert(r_barrell_ack == 0);
end
default: begin end
endcase
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(maintenance_mode)))
begin
assert(bank_active[0][1:0] == $past(bank_active[0][2:1]));
assert(bank_active[1][1:0] == $past(bank_active[1][2:1]));
assert(bank_active[2][1:0] == $past(bank_active[2][2:1]));
assert(bank_active[3][1:0] == $past(bank_active[3][2:1]));
end
always @(*)
`ifdef VERIFIC
if (in_refresh)
`else
if ((in_refresh)||(maintenance_mode))
`endif
begin
assert(bank_active[0] == 0);
assert(bank_active[1] == 0);
assert(bank_active[2] == 0);
assert(bank_active[3] == 0);
end
always @(posedge i_clk)
if ((f_past_valid)&&($past(o_wb_ack)))
assert(!o_wb_ack);
reg [3:0] f_acks_pending;
always @(*)
begin
f_acks_pending = 0;
for(f_k=0; f_k<RDLY; f_k = f_k + 1)
if (r_barrell_ack[f_k])
f_acks_pending = f_acks_pending + 1'b1;
end
always @(posedge i_clk)
if ((f_past_valid)&&(!$past(i_wb_cyc)))
assert(r_barrell_ack == 0);
wire f_ispending;
assign f_ispending = (r_pending)&&((f_cmd != `F_READ)&&(f_cmd != `F_WRITE));
always @(posedge i_clk)
if ((f_past_valid)&&(i_wb_cyc))
assert(f_outstanding == (f_ispending ? 1'b1:1'b0) + f_acks_pending);
// always @(posedge i_clk)
// if (!i_wb_stb)
// begin
// restrict($stable(i_wb_we));
// restrict($stable(i_wb_addr));
// restrict($stable(i_wb_data));
// if ((i_wb_stb)&&(!i_wb_we))
// restrict(i_wb_data == 0);
// end
// always @(posedge i_clk)
// if ((f_past_valid)&&(!$past(i_wb_stb))&&(i_wb_stb))
// restrict(!$past(i_wb_cyc));
`ifdef SHADOW_MEMORY
reg [15:0] f_shadow_memory [0:((1<<26)-1)];
reg [13+13-1:0] f_shadow_addr;
always @(*)
f_shadow_addr <= { bank_row[o_ram_bs], o_ram_addr[8:0] };
always @(posedge i_clk)
if ((f_past_valid)&&($past(f_past_valid,4)
&&(!$past(maintenance_mode,4)))
if (f_cmd == `F_WRITE)
begin
f_shadow_memory[f_shadow_addr] <= o_ram_data;
assert(o_ram_dmod==`DMOD_PUTOUTPUT);
assert(o_ram_addr[0] == 1'b0);
end else if ($past(f_cmd)== `F_WRITE)
begin
f_shadow_memory[f_shadow_addr[26-1:1], 1'b1}] <= data;
assert(o_ram_dmod==`DMOD_PUTOUTPUT);
end else if ($past(f_cmd,4)==`F_READ)
begin
assert($past(o_ram_dmod)==`DMOD_GETINPUT);
assert(o_ram_dmod==`DMOD_GETINPUT);
assume(o_wb_data[31:16] == f_shadow_memory[$past(f_shadow_addr,4)]);
assume(o_wb_data[15: 0] == f_shadow_memory[{ $past(f_shadow_addr[25:1],4), 1'b1}]);
assert(r_barrell_ack[0]);
end
`endif
always @(posedge i_clk)
if (startup_hold)
assert(m_state == `RAM_POWER_UP);
always @(posedge i_clk)
if ((f_past_valid)&&(m_state != `RAM_SET_MODE)
&&($past(m_state) != `RAM_POWER_UP)
&&($past(maintenance_clocks)!=0))
assert(m_state == $past(m_state));
always @(posedge i_clk)
if ((f_past_valid)&&($past(m_state)== `RAM_POWER_UP))
assert((m_state == `RAM_POWER_UP)
||(m_state == `RAM_SET_MODE));
always @(posedge i_clk)
if ((f_past_valid)&&($past(m_state)== `RAM_SET_MODE))
assert((m_state == `RAM_SET_MODE)
||(m_state == `RAM_INITIAL_REFRESH));
always @(posedge i_clk)
if ((f_past_valid)&&($past(m_state)== `RAM_INITIAL_REFRESH))
assert((m_state == `RAM_INITIAL_REFRESH)
||(m_state == `RAM_OPERATIONAL));
always @(posedge i_clk)
assert((m_state == `RAM_POWER_UP)
||(m_state == `RAM_INITIAL_REFRESH)
||(m_state == `RAM_SET_MODE));
always @(posedge i_clk)
if (maintenance_mode)
assert(clocks_til_idle ==0);
always @(posedge i_clk)
if (maintenance_clocks_zero)
assert(maintenance_clocks == 0);
always @(posedge i_clk)
if (maintenance_clocks == 0)
assert(maintenance_clocks_zero);
always @(posedge i_clk)
if (maintenance_clocks != 0)
assert(!maintenance_clocks_zero);
always @(posedge i_clk)
if (!maintenance_mode)
assert(m_state == `RAM_INITIAL_REFRESH);
always @(posedge i_clk)
if (m_state == `RAM_INITIAL_REFRESH)
assert(maintenance_clocks <= 4'hc);
always @(posedge i_clk)
if (m_state == `RAM_SET_MODE)
assert(maintenance_clocks <= 4'h3);
always @(*)
assert( (m_state == `RAM_POWER_UP)
||(m_state == `RAM_INITIAL_REFRESH)
||(m_state == `RAM_SET_MODE));
// ||(m_state == `RAM_OPERATIONAL) );
always @(posedge i_clk)
if ((f_past_valid)&&(startup_hold))
begin
assert(o_ram_cke);
assert(o_ram_cs_n);
assert(o_ram_ras_n);
assert(o_ram_cas_n);
assert(o_ram_we_n);
assert(o_ram_dqm);
end
`endif
endmodule
Reference in New Issue View Git Blame Copy Permalink