#!/usr/bin/env python #--------------------------------------------------------------------- # IDAPython - Python plugin for Interactive Disassembler Pro # # Original IDC.IDC: # Copyright (c) 1990-2010 Ilfak Guilfanov # # Python conversion: # Copyright (c) 2004-2010 Gergely Erdelyi # # All rights reserved. # # For detailed copyright information see the file COPYING in # the root of the distribution archive. #--------------------------------------------------------------------- # idc.py - IDC compatibility module #--------------------------------------------------------------------- """ IDC compatibility module This file contains IDA built-in function declarations and internal bit definitions. Each byte of the program has 32-bit flags (low 8 bits keep the byte value). These 32 bits are used in GetFlags/SetFlags functions. You may freely examine these bits using GetFlags() but the use of the SetFlags() function is strongly discouraged. This file is subject to change without any notice. Future versions of IDA may use other definitions. """ try: import idaapi except ImportError: print "Could not import idaapi. Running in 'pydoc mode'." import os import re import struct import time import types __EA64__ = idaapi.BADADDR == 0xFFFFFFFFFFFFFFFFL WORDMASK = __EA64__ and 0xFFFFFFFFFFFFFFFF or 0xFFFFFFFF class DeprecatedIDCError(Exception): """ Exception for deprecated function calls """ pass def _IDC_GetAttr(obj, attrmap, attroffs): """ Internal function to generically get object attributes Do not use unless you know what you are doing """ if attroffs in attrmap and hasattr(obj, attrmap[attroffs][1]): return getattr(obj, attrmap[attroffs][1]) else: errormsg = "attribute with offset %d not found, check the offset and report the problem" % attroffs raise KeyError, errormsg def _IDC_SetAttr(obj, attrmap, attroffs, value): """ Internal function to generically set object attributes Do not use unless you know what you are doing """ # check for read-only atributes if attroffs in attrmap: if attrmap[attroffs][0]: raise KeyError, "attribute with offset %d is read-only" % attroffs elif hasattr(obj, attrmap[attroffs][1]): return setattr(obj, attrmap[attroffs][1], value) errormsg = "attribute with offset %d not found, check the offset and report the problem" % attroffs raise KeyError, errormsg BADADDR = idaapi.BADADDR # Not allowed address value BADSEL = idaapi.BADSEL # Not allowed selector value/number MAXADDR = idaapi.MAXADDR & WORDMASK # # Flag bit definitions (for GetFlags()) # MS_VAL = idaapi.MS_VAL # Mask for byte value FF_IVL = idaapi.FF_IVL # Byte has value ? # Do flags contain byte value? (i.e. has the byte a value?) # if not, the byte is uninitialized. def hasValue(F): return ((F & FF_IVL) != 0) # any defined value? # Get byte value from flags # Get value of byte provided that the byte is initialized. # This macro works ok only for 8-bit byte machines. def byteValue(F): return (F & MS_VAL) # quick replacement for Byte() # Is the byte initialized? def isLoaded(ea): return hasValue(GetFlags(ea)) # any defined value? MS_CLS = idaapi.MS_CLS # Mask for typing FF_CODE = idaapi.FF_CODE # Code ? FF_DATA = idaapi.FF_DATA # Data ? FF_TAIL = idaapi.FF_TAIL # Tail ? FF_UNK = idaapi.FF_UNK # Unknown ? def isCode(F): return ((F & MS_CLS) == FF_CODE) # is code byte? def isData(F): return ((F & MS_CLS) == FF_DATA) # is data byte? def isTail(F): return ((F & MS_CLS) == FF_TAIL) # is tail byte? def isUnknown(F): return ((F & MS_CLS) == FF_UNK) # is unexplored byte? def isHead(F): return ((F & FF_DATA) != 0) # is start of code/data? # # Common bits # MS_COMM = idaapi.MS_COMM # Mask of common bits FF_COMM = idaapi.FF_COMM # Has comment? FF_REF = idaapi.FF_REF # has references? FF_LINE = idaapi.FF_LINE # Has next or prev cmt lines ? FF_NAME = idaapi.FF_NAME # Has user-defined name ? FF_LABL = idaapi.FF_LABL # Has dummy name? FF_FLOW = idaapi.FF_FLOW # Exec flow from prev instruction? FF_VAR = idaapi.FF_VAR # Is byte variable ? FF_ANYNAME = FF_LABL | FF_NAME def isFlow(F): return ((F & FF_FLOW) != 0) def isVar(F): return ((F & FF_VAR ) != 0) def isExtra(F): return ((F & FF_LINE) != 0) def isRef(F): return ((F & FF_REF) != 0) def hasName(F): return ((F & FF_NAME) != 0) def hasUserName(F): return ((F & FF_ANYNAME) == FF_NAME) MS_0TYPE = idaapi.MS_0TYPE # Mask for 1st arg typing FF_0VOID = idaapi.FF_0VOID # Void (unknown)? FF_0NUMH = idaapi.FF_0NUMH # Hexadecimal number? FF_0NUMD = idaapi.FF_0NUMD # Decimal number? FF_0CHAR = idaapi.FF_0CHAR # Char ('x')? FF_0SEG = idaapi.FF_0SEG # Segment? FF_0OFF = idaapi.FF_0OFF # Offset? FF_0NUMB = idaapi.FF_0NUMB # Binary number? FF_0NUMO = idaapi.FF_0NUMO # Octal number? FF_0ENUM = idaapi.FF_0ENUM # Enumeration? FF_0FOP = idaapi.FF_0FOP # Forced operand? FF_0STRO = idaapi.FF_0STRO # Struct offset? FF_0STK = idaapi.FF_0STK # Stack variable? MS_1TYPE = idaapi.MS_1TYPE # Mask for 2nd arg typing FF_1VOID = idaapi.FF_1VOID # Void (unknown)? FF_1NUMH = idaapi.FF_1NUMH # Hexadecimal number? FF_1NUMD = idaapi.FF_1NUMD # Decimal number? FF_1CHAR = idaapi.FF_1CHAR # Char ('x')? FF_1SEG = idaapi.FF_1SEG # Segment? FF_1OFF = idaapi.FF_1OFF # Offset? FF_1NUMB = idaapi.FF_1NUMB # Binary number? FF_1NUMO = idaapi.FF_1NUMO # Octal number? FF_1ENUM = idaapi.FF_1ENUM # Enumeration? FF_1FOP = idaapi.FF_1FOP # Forced operand? FF_1STRO = idaapi.FF_1STRO # Struct offset? FF_1STK = idaapi.FF_1STK # Stack variable? # The following macros answer questions like # 'is the 1st (or 2nd) operand of instruction or data of the given type'? # Please note that data items use only the 1st operand type (is...0) def isDefArg0(F): return ((F & MS_0TYPE) != FF_0VOID) def isDefArg1(F): return ((F & MS_1TYPE) != FF_1VOID) def isDec0(F): return ((F & MS_0TYPE) == FF_0NUMD) def isDec1(F): return ((F & MS_1TYPE) == FF_1NUMD) def isHex0(F): return ((F & MS_0TYPE) == FF_0NUMH) def isHex1(F): return ((F & MS_1TYPE) == FF_1NUMH) def isOct0(F): return ((F & MS_0TYPE) == FF_0NUMO) def isOct1(F): return ((F & MS_1TYPE) == FF_1NUMO) def isBin0(F): return ((F & MS_0TYPE) == FF_0NUMB) def isBin1(F): return ((F & MS_1TYPE) == FF_1NUMB) def isOff0(F): return ((F & MS_0TYPE) == FF_0OFF) def isOff1(F): return ((F & MS_1TYPE) == FF_1OFF) def isChar0(F): return ((F & MS_0TYPE) == FF_0CHAR) def isChar1(F): return ((F & MS_1TYPE) == FF_1CHAR) def isSeg0(F): return ((F & MS_0TYPE) == FF_0SEG) def isSeg1(F): return ((F & MS_1TYPE) == FF_1SEG) def isEnum0(F): return ((F & MS_0TYPE) == FF_0ENUM) def isEnum1(F): return ((F & MS_1TYPE) == FF_1ENUM) def isFop0(F): return ((F & MS_0TYPE) == FF_0FOP) def isFop1(F): return ((F & MS_1TYPE) == FF_1FOP) def isStroff0(F): return ((F & MS_0TYPE) == FF_0STRO) def isStroff1(F): return ((F & MS_1TYPE) == FF_1STRO) def isStkvar0(F): return ((F & MS_0TYPE) == FF_0STK) def isStkvar1(F): return ((F & MS_1TYPE) == FF_1STK) # # Bits for DATA bytes # DT_TYPE = idaapi.DT_TYPE & 0xFFFFFFFF # Mask for DATA typing FF_BYTE = idaapi.FF_BYTE & 0xFFFFFFFF # byte FF_WORD = idaapi.FF_WORD & 0xFFFFFFFF # word FF_DWRD = idaapi.FF_DWRD & 0xFFFFFFFF # dword FF_QWRD = idaapi.FF_QWRD & 0xFFFFFFFF # qword FF_TBYT = idaapi.FF_TBYT & 0xFFFFFFFF # tbyte FF_ASCI = idaapi.FF_ASCI & 0xFFFFFFFF # ASCII ? FF_STRU = idaapi.FF_STRU & 0xFFFFFFFF # Struct ? FF_OWRD = idaapi.FF_OWRD & 0xFFFFFFFF # octaword (16 bytes) FF_FLOAT = idaapi.FF_FLOAT & 0xFFFFFFFF # float FF_DOUBLE = idaapi.FF_DOUBLE & 0xFFFFFFFF # double FF_PACKREAL = idaapi.FF_PACKREAL & 0xFFFFFFFF # packed decimal real FF_ALIGN = idaapi.FF_ALIGN & 0xFFFFFFFF # alignment directive def isByte(F): return (isData(F) and (F & DT_TYPE) == FF_BYTE) def isWord(F): return (isData(F) and (F & DT_TYPE) == FF_WORD) def isDwrd(F): return (isData(F) and (F & DT_TYPE) == FF_DWRD) def isQwrd(F): return (isData(F) and (F & DT_TYPE) == FF_QWRD) def isOwrd(F): return (isData(F) and (F & DT_TYPE) == FF_OWRD) def isTbyt(F): return (isData(F) and (F & DT_TYPE) == FF_TBYT) def isFloat(F): return (isData(F) and (F & DT_TYPE) == FF_FLOAT) def isDouble(F): return (isData(F) and (F & DT_TYPE) == FF_DOUBLE) def isPackReal(F): return (isData(F) and (F & DT_TYPE) == FF_PACKREAL) def isASCII(F): return (isData(F) and (F & DT_TYPE) == FF_ASCI) def isStruct(F): return (isData(F) and (F & DT_TYPE) == FF_STRU) def isAlign(F): return (isData(F) and (F & DT_TYPE) == FF_ALIGN) # # Bits for CODE bytes # MS_CODE = idaapi.MS_CODE & 0xFFFFFFFF FF_FUNC = idaapi.FF_FUNC & 0xFFFFFFFF # function start? FF_IMMD = idaapi.FF_IMMD & 0xFFFFFFFF # Has Immediate value ? FF_JUMP = idaapi.FF_JUMP & 0xFFFFFFFF # Has jump table # # Loader flags # NEF_SEGS = idaapi.NEF_SEGS # Create segments NEF_RSCS = idaapi.NEF_RSCS # Load resources NEF_NAME = idaapi.NEF_NAME # Rename entries NEF_MAN = idaapi.NEF_MAN # Manual load NEF_FILL = idaapi.NEF_FILL # Fill segment gaps NEF_IMPS = idaapi.NEF_IMPS # Create imports section NEF_TIGHT = idaapi.NEF_TIGHT # Don't align segments (OMF) NEF_FIRST = idaapi.NEF_FIRST # This is the first file loaded NEF_CODE = idaapi.NEF_CODE # for load_binary_file: NEF_RELOAD = idaapi.NEF_RELOAD # reload the file at the same place: NEF_FLAT = idaapi.NEF_FLAT # Autocreated FLAT group (PE) # List of built-in functions # -------------------------- # # The following conventions are used in this list: # 'ea' is a linear address # 'success' is 0 if a function failed, 1 otherwise # 'void' means that function returns no meaningful value (always 0) # # All function parameter conversions are made automatically. # # ---------------------------------------------------------------------------- # M I S C E L L A N E O U S # ---------------------------------------------------------------------------- def IsString(var): raise NotImplementedError, "this function is not needed in Python" def IsLong(var): raise NotImplementedError, "this function is not needed in Python" def IsFloat(var): raise NotImplementedError, "this function is not needed in Python" def MK_FP(seg, off): """ Return value of expression: ((seg<<4) + off) """ return (seg << 4) + off def form(format, *args): raise DeprecatedIDCError, "form() is deprecated. Use python string operations instead." def substr(s, x1, x2): raise DeprecatedIDCError, "substr() is deprecated. Use python string operations instead." def strstr(s1, s2): raise DeprecatedIDCError, "strstr() is deprecated. Use python string operations instead." def strlen(s): raise DeprecatedIDCError, "strlen() is deprecated. Use python string operations instead." def xtol(s): raise DeprecatedIDCError, "xtol() is deprecated. Use python long() instead." def atoa(ea): """ Convert address value to a string Return address in the form 'seg000:1234' (the same as in line prefixes) @param ea: address to format """ segname = SegName(ea) if segname == "": segname = "0" return "%s:%X" % (segname, ea) def ltoa(n, radix): raise DeprecatedIDCError, "ltoa() is deprecated. Use python string operations instead." def atol(s): raise DeprecatedIDCError, "atol() is deprecated. Use python long() instead." def rotate_left(value, count, nbits, offset): """ Rotate a value to the left (or right) @param value: value to rotate @param count: number of times to rotate. negative counter means rotate to the right @param nbits: number of bits to rotate @param offset: offset of the first bit to rotate @return: the value with the specified field rotated all other bits are not modified """ assert offset >= 0, "offset must be >= 0" assert nbits > 0, "nbits must be > 0" mask = 2**(offset+nbits) - 2**offset tmp = value & mask if count > 0: for x in xrange(count): if (tmp >> (offset+nbits-1)) & 1: tmp = (tmp << 1) | (1 << offset) else: tmp = (tmp << 1) else: for x in xrange(-count): if (tmp >> offset) & 1: tmp = (tmp >> 1) | (1 << (offset+nbits-1)) else: tmp = (tmp >> 1) value = (value-(value&mask)) | (tmp & mask) return value def rotate_dword(x, count): return rotate_left(x, count, 32, 0) def rotate_word(x, count): return rotate_left(x, count, 16, 0) def rotate_byte(x, count): return rotate_left(x, count, 8, 0) # AddHotkey return codes IDCHK_OK = 0 # ok IDCHK_ARG = -1 # bad argument(s) IDCHK_KEY = -2 # bad hotkey name IDCHK_MAX = -3 # too many IDC hotkeys def AddHotkey(hotkey, idcfunc): """ Add hotkey for IDC function @param hotkey: hotkey name ('a', "Alt-A", etc) @param idcfunc: IDC function name @note: GUI version doesn't support hotkeys @return: None """ return idaapi.add_idc_hotkey(hotkey, idcfunc) def DelHotkey(hotkey): """ Delete IDC function hotkey @param hotkey: hotkey code to delete """ return idaapi.del_idc_hotkey(hotkey) def Jump(ea): """ Move cursor to the specifed linear address @param ea: linear address """ return idaapi.jumpto(ea) def Wait(): """ Process all entries in the autoanalysis queue Wait for the end of autoanalysis @note: This function will suspend execution of the calling script till the autoanalysis queue is empty. """ return idaapi.autoWait() def CompileEx(input, isfile): """ Compile an IDC script The input should not contain functions that are currently executing - otherwise the behaviour of the replaced functions is undefined. @param input: if isfile != 0, then this is the name of file to compile otherwise it holds the text to compile @param isfile: specify if 'input' holds a filename or the expression itself @return: 0 - ok, otherwise it returns an error message """ if isfile: res = idaapi.Compile(input) else: res = idaapi.CompileLine(input) if res: return res else: return 0 def Eval(expr): """ Evaluate an IDC expression @param expr: an expression @return: the expression value. If there are problems, the returned value will be "IDC_FAILURE: xxx" where xxx is the error description @note: Python implementation evaluates IDC only, while IDC can call other registered languages """ rv = idaapi.idc_value_t() err = idaapi.calc_idc_expr(BADADDR, expr, rv) if err: return "IDC_FAILURE: "+err else: if rv.vtype == '\x01': # VT_STR return rv.str elif rv.vtype == '\x02': # long return rv.num elif rv.vtype == '\x07': # VT_STR2 return rv.c_str() else: raise NotImplementedError, "Eval() supports only expressions returning strings or longs" def EVAL_FAILURE(code): """ Check the result of Eval() for evaluation failures @param code: result of Eval() @return: True if there was an evaluation error """ return type(code) == types.StringType and code.startswith("IDC_FAILURE: ") def SaveBase(idbname, flags=0): """ Save current database to the specified idb file @param idbname: name of the idb file. if empty, the current idb file will be used. @param flags: DBFL_BAK or 0 """ if len(idbname)==0: idbname = idaapi.cvar.database_idb saveflags = idaapi.cvar.database_flags if flags & DBFL_BAK: idaapi.cvar.database_flags |= DBFL_BAK else: idaapi.cvar.database_flags &= ~DBFL_BAK res = idaapi.save_database(idbname, 0) idaapi.cvar.database_flags = saveflags return res DBFL_BAK = 0x04 # create backup file def Exit(code): """ Stop execution of IDC program, close the database and exit to OS @param code: code to exit with. @return: - """ idaapi.qexit(code) def Exec(command): """ Execute an OS command. @param command: command line to execute @return: error code from OS @note: IDA will wait for the started program to finish. In order to start the command in parallel, use OS methods. For example, you may start another program in parallel using "start" command. """ return os.system(command) def Sleep(milliseconds): """ Sleep the specified number of milliseconds This function suspends IDA for the specified amount of time @param milliseconds: time to sleep """ time.sleep(float(milliseconds)/1000) def RunPlugin(name, arg): """ Load and run a plugin @param name: The plugin name is a short plugin name without an extension @param arg: integer argument @return: 0 if could not load the plugin, 1 if ok """ return idaapi.load_and_run_plugin(name, arg) def ApplySig(name): """ Load (plan to apply) a FLIRT signature file @param name: signature name without path and extension @return: 0 if could not load the signature file, !=0 otherwise """ return idaapi.plan_to_apply_idasgn(name) #---------------------------------------------------------------------------- # C H A N G E P R O G R A M R E P R E S E N T A T I O N #---------------------------------------------------------------------------- def DeleteAll(): """ Delete all segments, instructions, comments, i.e. everything except values of bytes. """ ea = idaapi.cvar.inf.minEA # Brute-force nuke all info from all the heads while ea != BADADDR and ea <= idaapi.cvar.inf.maxEA: idaapi.del_local_name(ea) idaapi.del_global_name(ea) func = idaapi.get_func(ea) if func: idaapi.del_func_cmt(func, False) idaapi.del_func_cmt(func, True) idaapi.del_func(ea) idaapi.del_hidden_area(ea) seg = idaapi.getseg(ea) if seg: idaapi.del_segment_cmt(seg, False) idaapi.del_segment_cmt(seg, True) idaapi.del_segm(ea, idaapi.SEGDEL_KEEP | idaapi.SEGDEL_SILENT) ea = idaapi.next_head(ea, idaapi.cvar.inf.maxEA) def MakeCode(ea): """ Create an instruction at the specified address @param ea: linear address @return: 0 - can not create an instruction (no such opcode, the instruction would overlap with existing items, etc) otherwise returns length of the instruction in bytes """ return idaapi.create_insn(ea) def AnalyzeArea(sEA, eEA): """ Perform full analysis of the area @param sEA: starting linear address @param eEA: ending linear address (excluded) @return: 1-ok, 0-Ctrl-Break was pressed. """ return idaapi.analyze_area(sEA, eEA) def MakeNameEx(ea, name, flags): """ Rename an address @param ea: linear address @param name: new name of address. If name == "", then delete old name @param flags: combination of SN_... constants @return: 1-ok, 0-failure """ return idaapi.set_name(ea, name, flags) SN_CHECK = idaapi.SN_CHECK # Fail if the name contains invalid # characters # If this bit is clear, all invalid chars # (those !is_ident_char()) will be replaced # by SubstChar (usually '_') # List of valid characters is defined in # ida.cfg SN_NOCHECK = idaapi.SN_NOCHECK # Replace invalid chars with SubstChar SN_PUBLIC = idaapi.SN_PUBLIC # if set, make name public SN_NON_PUBLIC = idaapi.SN_NON_PUBLIC # if set, make name non-public SN_WEAK = idaapi.SN_WEAK # if set, make name weak SN_NON_WEAK = idaapi.SN_NON_WEAK # if set, make name non-weak SN_AUTO = idaapi.SN_AUTO # if set, make name autogenerated SN_NON_AUTO = idaapi.SN_NON_AUTO # if set, make name non-autogenerated SN_NOLIST = idaapi.SN_NOLIST # if set, exclude name from the list # if not set, then include the name into # the list (however, if other bits are set, # the name might be immediately excluded # from the list) SN_NOWARN = idaapi.SN_NOWARN # don't display a warning if failed SN_LOCAL = idaapi.SN_LOCAL # create local name. a function should exist. # local names can't be public or weak. # also they are not included into the list # of names they can't have dummy prefixes def MakeComm(ea, comment): """ Set an indented regular comment of an item @param ea: linear address @param comment: comment string @return: None """ return idaapi.set_cmt(ea, comment, 0) def MakeRptCmt(ea, comment): """ Set an indented repeatable comment of an item @param ea: linear address @param comment: comment string @return: None """ return idaapi.set_cmt(ea, comment, 1) def MakeArray(ea, nitems): """ Create an array. @param ea: linear address @param nitems: size of array in items @note: This function will create an array of the items with the same type as the type of the item at 'ea'. If the byte at 'ea' is undefined, then this function will create an array of bytes. """ flags = idaapi.getFlags(ea) if idaapi.isUnknown(flags): flags = idaapi.FF_BYTE if idaapi.isStruct(flags): ti = idaapi.opinfo_t() assert idaapi.get_typeinfo(ea, 0, flags, ti), "get_typeinfo() failed" itemsize = idaapi.get_data_elsize(ea, flags, ti) tid = ti.tid else: itemsize = idaapi.get_item_size(ea) tid = BADADDR return idaapi.do_data_ex(ea, flags, itemsize*nitems, tid) def MakeStr(ea, endea): """ Create a string. This function creates a string (the string type is determined by the value of GetLongPrm(INF_STRTYPE)) @param ea: linear address @param endea: ending address of the string (excluded) if endea == BADADDR, then length of string will be calculated by the kernel @return: 1-ok, 0-failure @note: The type of an existing string is returned by GetStringType() """ return idaapi.make_ascii_string(ea, endea - ea, GetLongPrm(INF_STRTYPE)) def MakeData(ea, flags, size, tid): """ Create a data item at the specified address @param ea: linear address @param flags: FF_BYTE..FF_PACKREAL @param size: size of item in bytes @param tid: for FF_STRU the structure id @return: 1-ok, 0-failure """ return idaapi.do_data_ex(ea, flags, size, tid) def MakeByte(ea): """ Convert the current item to a byte @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doByte(ea, 1) def MakeWord(ea): """ Convert the current item to a word (2 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doWord(ea, 2) def MakeDword(ea): """ Convert the current item to a double word (4 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doDwrd(ea, 4) def MakeQword(ea): """ Convert the current item to a quadro word (8 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doQwrd(ea, 8) def MakeOword(ea): """ Convert the current item to a octa word (16 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doOwrd(ea, 16) def MakeFloat(ea): """ Convert the current item to a floating point (4 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doFloat(ea, 4) def MakeDouble(ea): """ Convert the current item to a double floating point (8 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doDouble(ea, 8) def MakePackReal(ea): """ Convert the current item to a packed real (10 or 12 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doPackReal(ea, idaapi.ph_get_tbyte_size()) def MakeTbyte(ea): """ Convert the current item to a tbyte (10 or 12 bytes) @param ea: linear address @return: 1-ok, 0-failure """ return idaapi.doTbyt(ea, idaapi.ph_get_tbyte_size()) def MakeStructEx(ea, size, strname): """ Convert the current item to a structure instance @param ea: linear address @param size: structure size in bytes. -1 means that the size will be calculated automatically @param strname: name of a structure type @return: 1-ok, 0-failure """ strid = idaapi.get_struc_id(strname) if size == -1: size = idaapi.get_struc_size(strid) return idaapi.doStruct(ea, size, strid) def MakeAlign(ea, count, align): """ Convert the current item to an alignment directive @param ea: linear address @param count: number of bytes to convert @param align: 0 or 1..32 if it is 0, the correct alignment will be calculated by the kernel @return: 1-ok, 0-failure """ return idaapi.doAlign(ea, count, align) def MakeLocal(start, end, location, name): """ Create a local variable @param start: start of address range for the local variable @param end: end of address range for the local variable @param location: the variable location in the "[bp+xx]" form where xx is a number. The location can also be specified as a register name. @param name: name of the local variable @return: 1-ok, 0-failure @note: For the stack variables the end address is ignored. If there is no function at 'start' then this function. will fail. """ func = idaapi.get_func(start) if not func: return 0 # Find out if location is in the [bp+xx] form r = re.compile("\[([a-z]+)([-+][0-9a-fx]+)", re.IGNORECASE) m = r.match(location) if m: # Location in the form of [bp+xx] register = idaapi.str2reg(m.group(1)) offset = int(m.group(2), 0) frame = idaapi.get_frame(func) if register == -1 or not frame: return 0 offset += func.frsize member = idaapi.get_member(frame, offset) if member: # Member already exists, rename it if idaapi.set_member_name(frame, offset, name): return 1 else: return 0 else: # No member at the offset, create a new one if idaapi.add_struc_member(frame, name, offset, idaapi.byteflag(), None, 1) == 0: return 1 else: return 0 else: # Location as simple register name return idaapi.add_regvar(func, start, end, location, name, None) def MakeUnkn(ea, flags): """ Convert the current item to an explored item @param ea: linear address @param flags: combination of DOUNK_* constants @return: None """ return idaapi.do_unknown(ea, flags) def MakeUnknown(ea, size, flags): """ Convert the current item to an explored item @param ea: linear address @param size: size of the range to undefine (for MakeUnknown) @param flags: combination of DOUNK_* constants @return: None """ return idaapi.do_unknown_range(ea, size, flags) DOUNK_SIMPLE = idaapi.DOUNK_SIMPLE # simply undefine the specified item DOUNK_EXPAND = idaapi.DOUNK_EXPAND # propogate undefined items, for example # if removing an instruction removes all # references to the next instruction, then # plan to convert to unexplored the next # instruction too. DOUNK_DELNAMES = idaapi.DOUNK_DELNAMES # delete any names at the specified address(es) def SetArrayFormat(ea, flags, litems, align): """ Set array representation format @param ea: linear address @param flags: combination of AP_... constants or 0 @param litems: number of items per line. 0 means auto @param align: element alignment - -1: do not align - 0: automatic alignment - other values: element width @return: 1-ok, 0-failure """ return Eval("SetArrayFormat(0x%X, 0x%X, %d, %d)"%(ea, flags, litems, align)) AP_ALLOWDUPS = 0x00000001L # use 'dup' construct AP_SIGNED = 0x00000002L # treats numbers as signed AP_INDEX = 0x00000004L # display array element indexes as comments AP_ARRAY = 0x00000008L # reserved (this flag is not stored in database) AP_IDXBASEMASK = 0x000000F0L # mask for number base of the indexes AP_IDXDEC = 0x00000000L # display indexes in decimal AP_IDXHEX = 0x00000010L # display indexes in hex AP_IDXOCT = 0x00000020L # display indexes in octal AP_IDXBIN = 0x00000030L # display indexes in binary def OpBinary(ea, n): """ Convert an operand of the item (instruction or data) to a binary number @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands @return: 1-ok, 0-failure @note: the data items use only the type of the first operand """ return idaapi.op_bin(ea, n) def OpOctal(ea, n): """ Convert an operand of the item (instruction or data) to an octal number @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.op_oct(ea, n) def OpDecimal(ea, n): """ Convert an operand of the item (instruction or data) to a decimal number @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.op_dec(ea, n) def OpHex(ea, n): """ Convert an operand of the item (instruction or data) to a hexadecimal number @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.op_hex(ea, n) def OpChr(ea, n): """ @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.op_chr(ea, n) def OpOff(ea, n, base): """ Convert operand to an offset (for the explanations of 'ea' and 'n' please see OpBinary()) Example: ======== seg000:2000 dw 1234h and there is a segment at paragraph 0x1000 and there is a data item within the segment at 0x1234: seg000:1234 MyString db 'Hello, world!',0 Then you need to specify a linear address of the segment base to create a proper offset: OpOff(["seg000",0x2000],0,0x10000); and you will have: seg000:2000 dw offset MyString Motorola 680x0 processor have a concept of "outer offsets". If you want to create an outer offset, you need to combine number of the operand with the following bit: Please note that the outer offsets are meaningful only for Motorola 680x0. @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands @param base: base of the offset as a linear address If base == BADADDR then the current operand becomes non-offset """ return idaapi.set_offset(ea, n, base) OPND_OUTER = idaapi.OPND_OUTER # outer offset base def OpOffEx(ea, n, reftype, target, base, tdelta): """ Convert operand to a complex offset expression This is a more powerful version of OpOff() function. It allows to explicitly specify the reference type (off8,off16, etc) and the expression target with a possible target delta. The complex expressions are represented by IDA in the following form: target + tdelta - base If the target is not present, then it will be calculated using target = operand_value - tdelta + base The target must be present for LOW.. and HIGH.. reference types @param ea: linear address of the instruction/data @param n: number of operand to convert (the same as in OpOff) @param reftype: one of REF_... constants @param target: an explicitly specified expression target. if you don't want to specify it, use -1. Please note that LOW... and HIGH... reference type requre the target. @param base: the offset base (a linear address) @param tdelta: a displacement from the target which will be displayed in the expression. @return: success (boolean) """ return idaapi.op_offset(ea, n, reftype, target, base, tdelta) REF_OFF8 = idaapi.REF_OFF8 # 8bit full offset REF_OFF16 = idaapi.REF_OFF16 # 16bit full offset REF_OFF32 = idaapi.REF_OFF32 # 32bit full offset REF_LOW8 = idaapi.REF_LOW8 # low 8bits of 16bit offset REF_LOW16 = idaapi.REF_LOW16 # low 16bits of 32bit offset REF_HIGH8 = idaapi.REF_HIGH8 # high 8bits of 16bit offset REF_HIGH16 = idaapi.REF_HIGH16 # high 16bits of 32bit offset REF_VHIGH = idaapi.REF_VHIGH # high ph.high_fixup_bits of 32bit offset (processor dependent) REF_VLOW = idaapi.REF_VLOW # low (32-ph.high_fixup_bits) of 32bit offset (processor dependent) REF_OFF64 = idaapi.REF_OFF64 # 64bit full offset REFINFO_RVA = 0x10 # based reference (rva) REFINFO_PASTEND = 0x20 # reference past an item it may point to an nonexistitng # do not destroy alignment dirs REFINFO_NOBASE = 0x80 # offset base is a number # that base have be any value # nb: base xrefs are created only if base # points to the middle of a segment def OpSeg(ea, n): """ Convert operand to a segment expression @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.op_seg(ea, n) def OpNumber(ea, n): """ Convert operand to a number (with default number base, radix) @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.op_num(ea, n) def OpFloat(ea, n): """ Convert operand to a floating-point number @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands @return: 1-ok, 0-failure """ return idaapi.op_flt(ea, n) def OpAlt(ea, n, opstr): """ Specify operand represenation manually. @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands @param opstr: a string represenation of the operand @note: IDA will not check the specified operand, it will simply display it instead of the orginal representation of the operand. """ return idaapi.set_forced_operand(ea, n, opstr) def OpSign(ea, n): """ Change sign of the operand @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.toggle_sign(ea, n) def OpNot(ea, n): """ Toggle the bitwise not operator for the operand @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ idaapi.toggle_bnot(ea, n) return True def OpEnumEx(ea, n, enumid, serial): """ Convert operand to a symbolic constant @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands @param enumid: id of enumeration type @param serial: serial number of the constant in the enumeration The serial numbers are used if there are more than one symbolic constant with the same value in the enumeration. In this case the first defined constant get the serial number 0, then second 1, etc. There could be 256 symbolic constants with the same value in the enumeration. """ return idaapi.op_enum(ea, n, enumid, serial) def OpStroffEx(ea, n, strid, delta): """ Convert operand to an offset in a structure @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands @param strid: id of a structure type @param delta: struct offset delta. usually 0. denotes the difference between the structure base and the pointer into the structure. """ path = idaapi.tid_array(1) path[0] = strid return idaapi.op_stroff(ea, n, path.cast(), 1, delta) def OpStkvar(ea, n): """ Convert operand to a stack variable @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands """ return idaapi.op_stkvar(ea, n) def OpHigh(ea, n, target): """ Convert operand to a high offset High offset is the upper 16bits of an offset. This type is used by TMS320C6 processors (and probably by other RISC processors too) @param ea: linear address @param n: number of operand - 0 - the first operand - 1 - the second, third and all other operands - -1 - all operands @param target: the full value (all 32bits) of the offset """ return idaapi.op_offset(ea, n, idaapi.REF_HIGH16, target) def MakeVar(ea): """ Mark the location as "variable" @param ea: address to mark @return: None @note: All that IDA does is to mark the location as "variable". Nothing else, no additional analysis is performed. This function may disappear in the future. """ idaapi.doVar(ea, 1) def ExtLinA(ea, n, line): """ Specify an additional line to display before the generated ones. @param ea: linear address @param n: number of anterior additioal line (0..MAX_ITEM_LINES) @param line: the line to display @return: None @note: IDA displays additional lines from number 0 up to the first unexisting additional line. So, if you specify additional line #150 and there is no additional line #149, your line will not be displayed. MAX_ITEM_LINES is defined in IDA.CFG """ idaapi.ExtraUpdate(ea, line, idaapi.E_PREV + n) def ExtLinB(ea, n, line): """ Specify an additional line to display after the generated ones. @param ea: linear address @param n: number of posterior additioal line (0..MAX_ITEM_LINES) @param line: the line to display @return: None @note: IDA displays additional lines from number 0 up to the first unexisting additional line. So, if you specify additional line #150 and there is no additional line #149, your line will not be displayed. MAX_ITEM_LINES is defined in IDA.CFG """ idaapi.ExtraUpdate(ea, line, idaapi.E_NEXT + n) def DelExtLnA(ea, n): """ Delete an additional anterior line @param ea: linear address @param n: number of anterior additioal line (0..500) @return: None """ idaapi.ExtraDel(ea, idaapi.E_PREV + n) def DelExtLnB(ea, n): """ Delete an additional posterior line @param ea: linear address @param n: number of posterior additioal line (0..500) @return: None """ idaapi.ExtraDel(ea, idaapi.E_NEXT + n) def SetManualInsn(ea, insn): """ Specify instruction represenation manually. @param ea: linear address @param insn: a string represenation of the operand @note: IDA will not check the specified instruction, it will simply display it instead of the orginal representation. """ return idaapi.set_manual_insn(ea, insn) def GetManualInsn(ea): """ Get manual representation of instruction @param ea: linear address @note: This function returns value set by SetManualInsn earlier. """ return idaapi.get_manual_insn(ea) def PatchDbgByte(ea,value): """ Change a byte in the debugged process memory only @param ea: address @param value: new value of the byte @return: 1 if successful, 0 if not """ return idaapi.put_dbg_byte(ea, value) def PatchByte(ea, value): """ Change value of a program byte If debugger was active then the debugged process memory will be patched too @param ea: linear address @param value: new value of the byte @return: 1 if successful, 0 if not """ return idaapi.patch_byte(ea, value) def PatchWord(ea, value): """ Change value of a program word (2 bytes) @param ea: linear address @param value: new value of the word @return: 1 if successful, 0 if not """ return idaapi.patch_word(ea, value) def PatchDword(ea, value): """ Change value of a double word @param ea: linear address @param value: new value of the double word @return: 1 if successful, 0 if not """ return idaapi.patch_long(ea, value) def SetFlags(ea, flags): """ Set new value of flags This function should not used be used directly if possible. It changes properties of a program byte and if misused, may lead to very-very strange results. @param ea: adress @param flags: new flags value """ return idaapi.setFlags(ea, flags) def SetRegEx(ea, reg, value, tag): """ Set value of a segment register. @param ea: linear address @param reg: name of a register, like "cs", "ds", "es", etc. @param value: new value of the segment register. @param tag: of SR_... constants @note: IDA keeps tracks of all the points where segment register change their values. This function allows you to specify the correct value of a segment register if IDA is not able to find the corrent value. See also SetReg() compatibility macro. """ reg = idaapi.str2reg(reg); if reg >= 0: return idaapi.splitSRarea1(ea, reg, value, tag) else: return False SR_inherit = 1 # value is inherited from the previous area SR_user = 2 # value is specified by the user SR_auto = 3 # value is determined by IDA SR_autostart = 4 # as SR_auto for segment starting address def AutoMark2(start, end, queuetype): """ Plan to perform an action in the future. This function will put your request to a special autoanalysis queue. Later IDA will retrieve the request from the queue and process it. There are several autoanalysis queue types. IDA will process all queries from the first queue and then switch to the second queue, etc. """ return idaapi.auto_mark_range(start, end, queuetype) def AutoUnmark(start, end, queuetype): """ Remove range of addresses from a queue. """ return idaapi.autoUnmark(start, end, queuetype) def AutoMark(ea,qtype): """ Plan to analyze an address """ return AutoMark2(ea,ea+1,qtype) AU_UNK = idaapi.AU_UNK # make unknown AU_CODE = idaapi.AU_CODE # convert to instruction AU_PROC = idaapi.AU_PROC # make function AU_USED = idaapi.AU_USED # reanalyze AU_LIBF = idaapi.AU_LIBF # apply a flirt signature (the current signature!) AU_FINAL = idaapi.AU_FINAL # coagulate unexplored items #---------------------------------------------------------------------------- # P R O D U C E O U T P U T F I L E S #---------------------------------------------------------------------------- def GenerateFile(filetype, path, ea1, ea2, flags): """ Generate an output file @param filetype: type of output file. One of OFILE_... symbols. See below. @param path: the output file path (will be overwritten!) @param ea1: start address. For some file types this argument is ignored @param ea2: end address. For some file types this argument is ignored @param flags: bit combination of GENFLG_... @returns: number of the generated lines. -1 if an error occured OFILE_EXE: 0-can't generate exe file, 1-ok """ f = idaapi.fopenWT(path) if f: retval = idaapi.gen_file(filetype, f, ea1, ea2, flags) idaapi.eclose(f) return retval else: return -1 # output file types: OFILE_MAP = idaapi.OFILE_MAP OFILE_EXE = idaapi.OFILE_EXE OFILE_IDC = idaapi.OFILE_IDC OFILE_LST = idaapi.OFILE_LST OFILE_ASM = idaapi.OFILE_ASM OFILE_DIF = idaapi.OFILE_DIF # output control flags: GENFLG_MAPSEG = idaapi.GENFLG_MAPSEG # map: generate map of segments GENFLG_MAPNAME = idaapi.GENFLG_MAPNAME # map: include dummy names GENFLG_MAPDMNG = idaapi.GENFLG_MAPDMNG # map: demangle names GENFLG_MAPLOC = idaapi.GENFLG_MAPLOC # map: include local names GENFLG_IDCTYPE = idaapi.GENFLG_IDCTYPE # idc: gen only information about types GENFLG_ASMTYPE = idaapi.GENFLG_ASMTYPE # asm&lst: gen information about types too GENFLG_GENHTML = idaapi.GENFLG_GENHTML # asm&lst: generate html (gui version only) GENFLG_ASMINC = idaapi.GENFLG_ASMINC # asm&lst: gen information only about types def GenFuncGdl(outfile, title, ea1, ea2, flags): """ Generate a flow chart GDL file @param outfile: output file name. GDL extension will be used @param title: graph title @param ea1: beginning of the area to flow chart @param ea2: end of the area to flow chart. @param flags: combination of CHART_... constants @note: If ea2 == BADADDR then ea1 is treated as an address within a function. That function will be flow charted. """ return idaapi.gen_flow_graph(outfile, title, None, ea1, ea2, flags) CHART_PRINT_NAMES = 0x1000 # print labels for each block? CHART_GEN_GDL = 0x4000 # generate .gdl file (file extension is forced to .gdl) CHART_WINGRAPH = 0x8000 # call wingraph32 to display the graph CHART_NOLIBFUNCS = 0x0400 # don't include library functions in the graph def GenCallGdl(outfile, title, flags): """ Generate a function call graph GDL file @param outfile: output file name. GDL extension will be used @param title: graph title @param flags: combination of CHART_GEN_GDL, CHART_WINGRAPH, CHART_NOLIBFUNCS """ return idaapi.gen_simple_call_chart(outfile, "Generating chart", title, flags) #---------------------------------------------------------------------------- # C O M M O N I N F O R M A T I O N #---------------------------------------------------------------------------- def GetIdaDirectory (): """ Get IDA directory This function returns the directory where IDA.EXE resides """ return idaapi.idadir() def GetInputFile(): """ Get input file name This function returns name of the file being disassembled """ return idaapi.get_root_filename() def GetInputFilePath(): """ Get input file path This function returns the full path of the file being disassembled """ return idaapi.get_input_file_path() def SetInputFilePath(path): """ Set input file name This function updates the file name that is stored in the database It is used by the debugger and other parts of IDA Use it when the database is moved to another location or when you use remote debugging. @param path: new input file path """ return idaapi.set_root_filename(path) def GetIdbPath(): """ Get IDB full path This function returns full path of the current IDB database """ return idaapi.cvar.database_idb def GetInputMD5(): """ Return the MD5 hash of the input binary file @return: MD5 string or None on error """ ua=idaapi.uchar_array(16) if idaapi.retrieve_input_file_md5(ua.cast()): md5str="" for i in range(16): md5str += "%02x" % ua[i] return md5str else: return None def GetFlags(ea): """ Get internal flags @param ea: linear address @return: 32-bit value of internal flags. See start of IDC.IDC file for explanations. """ return idaapi.getFlags(ea) def IdbByte(ea): """ Get one byte (8-bit) of the program at 'ea' from the database even if the debugger is active @param ea: linear address @return: byte value. If the byte has no value then 0xFF is returned. @note: If the current byte size is different from 8 bits, then the returned value may have more 1's. To check if a byte has a value, use this expr: hasValue(GetFlags(ea)) """ return idaapi.get_db_byte(ea) def Byte(ea): """ Get value of program byte @param ea: linear address @return: value of byte. If byte has no value then returns 0xFF If the current byte size is different from 8 bits, then the returned value might have more 1's. To check if a byte has a value, use functions hasValue(GetFlags(ea)) """ return idaapi.get_byte(ea) def GetOriginalByte(ea): """ Get original value of program byte @param ea: linear address @return: the original value of byte before any patch applied to it """ return idaapi.get_original_byte(ea) def Word(ea): """ Get value of program word (2 bytes) @param ea: linear address @return: the value of the word. If word has no value then returns 0xFFFF If the current byte size is different from 8 bits, then the returned value might have more 1's. """ return idaapi.get_word(ea) def Dword(ea): """ Get value of program double word (4 bytes) @param ea: linear address @return: the value of the double word. If failed returns -1 """ return idaapi.get_long(ea) def Qword(ea): """ Get value of program quadro word (8 bytes) @param ea: linear address @return: the value of the quadro word. If failed, returns -1 @note: this function is available only in the 64-bit version of IDA Pro """ raise NotImplementedError, "will be implemented in the 64-bit version" def GetFloat(ea): """ Get value of a floating point number (4 bytes) @param ea: linear address @return: float """ tmp = idaapi.get_many_bytes(ea, 4) return struct.unpack("f", tmp)[0] def GetDouble(ea): """ Get value of a floating point number (8 bytes) @param ea: linear address @return: double """ tmp = idaapi.get_many_bytes(ea, 8) return struct.unpack("d", tmp)[0] def LocByName(name): """ Get linear address of a name @param name: name of program byte @return: address of the name badaddr - no such name """ return idaapi.get_name_ea(BADADDR, name) def LocByNameEx(fromaddr, name): """ Get linear address of a name @param fromaddr: the referring address. Allows to retrieve local label addresses in functions. If a local name is not found, then address of a global name is returned. @param name: name of program byte @return: address of the name (BADADDR - no such name) @note: Dummy names (like byte_xxxx where xxxx are hex digits) are parsed by this function to obtain the address. The database is not consulted for them. """ return idaapi.get_name_ea(fromaddr, name) def SegByBase(base): """ Get segment by segment base @param base: segment base paragraph or selector @return: linear address of the start of the segment or BADADDR if no such segment """ sel = idaapi.find_selector(base) seg = idaapi.get_segm_by_sel(sel) if seg: return seg.startEA else: return BADADDR def ScreenEA(): """ Get linear address of cursor """ return idaapi.get_screen_ea() def GetCurrentLine(): """ Get the disassembly line at the cursor @return: string """ return idaapi.tag_remove(idaapi.get_curline()) def SelStart(): """ Get start address of the selected area returns BADADDR - the user has not selected an area """ selection, startaddr, endaddr = idaapi.read_selection() if selection == 1: return startaddr else: return BADADDR def SelEnd(): """ Get end address of the selected area @return: BADADDR - the user has not selected an area """ selection, startaddr, endaddr = idaapi.read_selection() if selection == 1: return endaddr else: return BADADDR def GetReg(ea, reg): """ Get value of segment register at the specified address @param ea: linear address @param reg: name of segment register @return: the value of the segment register or -1 on error @note: The segment registers in 32bit program usually contain selectors, so to get paragraph pointed by the segment register you need to call AskSelector() function. """ reg = idaapi.str2reg(reg); if reg >= 0: return idaapi.getSR(ea, reg) else: return -1 def NextAddr(ea): """ Get next address in the program @param ea: linear address @return: BADADDR - the specified address in the last used address """ return idaapi.nextaddr(ea) def PrevAddr(ea): """ Get previous address in the program @param ea: linear address @return: BADADDR - the specified address in the first address """ return idaapi.prevaddr(ea) def NextHead(ea, maxea): """ Get next defined item (instruction or data) in the program @param ea: linear address to start search from @param maxea: the search will stop at the address maxea is not included in the search range @return: BADADDR - no (more) defined items """ return idaapi.next_head(ea, maxea) def PrevHead(ea, minea): """ Get previous defined item (instruction or data) in the program @param ea: linear address to start search from @param minea: the search will stop at the address minea is included in the search range @return: BADADDR - no (more) defined items """ return idaapi.prev_head(ea, minea) def NextNotTail(ea): """ Get next not-tail address in the program This function searches for the next displayable address in the program. The tail bytes of instructions and data are not displayable. @param ea: linear address @return: BADADDR - no (more) not-tail addresses """ return idaapi.next_not_tail(ea) def PrevNotTail(ea): """ Get previous not-tail address in the program This function searches for the previous displayable address in the program. The tail bytes of instructions and data are not displayable. @param ea: linear address @return: BADADDR - no (more) not-tail addresses """ return idaapi.prev_not_tail(ea) def ItemEnd(ea): """ Get address of the end of the item (instruction or data) @param ea: linear address @return: address past end of the item at 'ea' """ return idaapi.get_item_end(ea) def ItemSize(ea): """ Get size of instruction or data item in bytes @param ea: linear address @return: 1..n """ return idaapi.get_item_end(ea) - ea def NameEx(fromaddr, ea): """ Get visible name of program byte This function returns name of byte as it is displayed on the screen. If a name contains illegal characters, IDA replaces them by the substitution character during displaying. See IDA.CFG for the definition of the substitution character. @param fromaddr: the referring address. May be BADADDR. Allows to retrieve local label addresses in functions. If a local name is not found, then a global name is returned. @param ea: linear address @return: "" - byte has no name """ name = idaapi.get_name(fromaddr, ea) if not name: return "" else: return name def GetTrueNameEx(fromaddr, ea): """ Get true name of program byte This function returns name of byte as is without any replacements. @param fromaddr: the referring address. May be BADADDR. Allows to retrieve local label addresses in functions. If a local name is not found, then a global name is returned. @param ea: linear address @return: "" - byte has no name """ name = idaapi.get_true_name(fromaddr, ea) if not name: return "" else: return name def Demangle(name, disable_mask): """ Demangle a name @param name: name to demangle @param disable_mask: a mask that tells how to demangle the name it is a good idea to get this mask using GetLongPrm(INF_SHORT_DN) or GetLongPrm(INF_LONG_DN) @return: a demangled name If the input name cannot be demangled, returns None """ return idaapi.demangle_name(name, disable_mask) def GetDisasm(ea): """ Get disassembly line @param ea: linear address of instruction @return: "" - no instruction at the specified location @note: this function may not return exactly the same mnemonics as you see on the screen. """ text = idaapi.generate_disasm_line(ea) if text: return idaapi.tag_remove(text) else: return "" def GetMnem(ea): """ Get instruction mnemonics @param ea: linear address of instruction @return: "" - no instruction at the specified location @note: this function may not return exactly the same mnemonics as you see on the screen. """ res = idaapi.ua_mnem(ea) if not res: return "" else: return res def GetOpnd(ea, n): """ Get operand of an instruction @param ea: linear address of instruction @param n: number of operand: 0 - the first operand 1 - the second operand @return: the current text representation of operand """ res = idaapi.ua_outop(ea, n) if not res: return "" else: return idaapi.tag_remove(res) def GetOpType(ea, n): """ Get type of instruction operand @param ea: linear address of instruction @param n: number of operand: 0 - the first operand 1 - the second operand @return: any of o_* constants or -1 on error """ inslen = idaapi.decode_insn(ea) if inslen == 0: return -1 insn = idaapi.get_current_instruction() if not insn: return -1 op = idaapi.get_instruction_operand(insn, n) if not op: return -1 return op.type o_void = 0 # No Operand ---------- o_reg = 1 # General Register (al,ax,es,ds...) reg o_mem = 2 # Direct Memory Reference (DATA) addr o_phrase = 3 # Memory Ref [Base Reg + Index Reg] phrase o_displ = 4 # Memory Reg [Base Reg + Index Reg + Displacement] phrase+addr o_imm = 5 # Immediate Value value o_far = 6 # Immediate Far Address (CODE) addr o_near = 7 # Immediate Near Address (CODE) addr o_idpspec0 = 8 # IDP specific type o_idpspec1 = 9 # IDP specific type o_idpspec2 = 10 # IDP specific type o_idpspec3 = 11 # IDP specific type o_idpspec4 = 12 # IDP specific type o_idpspec5 = 13 # IDP specific type # x86 o_trreg = o_idpspec0 # trace register o_dbreg = o_idpspec1 # debug register o_crreg = o_idpspec2 # control register o_fpreg = o_idpspec3 # floating point register o_mmxreg = o_idpspec4 # mmx register o_xmmreg = o_idpspec5 # xmm register # arm o_reglist = o_idpspec1 # Register list (for LDM/STM) o_creglist = o_idpspec2 # Coprocessor register list (for CDP) o_creg = o_idpspec3 # Coprocessor register (for LDC/STC) o_fpreg = o_idpspec4 # Floating point register o_fpreglist = o_idpspec5 # Floating point register list o_text = (o_idpspec5+1) # Arbitrary text stored in the operand # ppc o_spr = o_idpspec0 # Special purpose register o_twofpr = o_idpspec1 # Two FPRs o_shmbme = o_idpspec2 # SH & MB & ME o_crf = o_idpspec3 # crfield x.reg o_crb = o_idpspec4 # crbit x.reg o_dcr = o_idpspec5 # Device control register def GetOperandValue(ea, n): """ Get number used in the operand This function returns an immediate number used in the operand @param ea: linear address of instruction @param n: the operand number @return: value operand is an immediate value => immediate value operand has a displacement => displacement operand is a direct memory ref => memory address operand is a register => register number operand is a register phrase => phrase number otherwise => -1 """ inslen = idaapi.decode_insn(ea) if inslen == 0: return -1 insn = idaapi.get_current_instruction() if not insn: return -1 op = idaapi.get_instruction_operand(insn, n) if not op: return -1 if op.type in [ idaapi.o_mem, idaapi.o_far, idaapi.o_near, idaapi.o_displ ]: value = op.addr elif op.type == idaapi.o_reg: value = op.reg elif op.type == idaapi.o_imm: value = op.value elif op.type == idaapi.o_phrase: value = op.phrase else: value = -1 return value def LineA(ea, num): """ Get anterior line @param ea: linear address @param num: number of anterior line (0..MAX_ITEM_LINES) MAX_ITEM_LINES is defined in IDA.CFG @return: anterior line string """ return idaapi.ExtraGet(ea, idaapi.E_PREV + num) def LineB(ea, num): """ Get posterior line @param ea: linear address @param num: number of posterior line (0..MAX_ITEM_LINES) @return: posterior line string """ return idaapi.ExtraGet(ea, idaapi.E_NEXT + num) def GetCommentEx(ea, repeatable): """ Get regular indented comment @param ea: linear address @return: string or None if it fails """ return idaapi.get_cmt(ea, repeatable) def CommentEx(ea, repeatable): GetCommentEx(ea, repeatable) def AltOp(ea, n): """ Get manually entered operand string @param ea: linear address @param n: number of operand: 0 - the first operand 1 - the second operand @return: string or None if it fails """ return idaapi.get_forced_operand(ea, n) def GetString(ea, length = -1, strtype = idaapi.ASCSTR_TERMCHR): """ Get string contents @param ea: linear address @param length: string length. -1 means to calculate the max string length @param strtype: the string type (one of ASCSTR_... constants) @return: string contents or empty string """ if length == -1: length = idaapi.get_max_ascii_length(ea, strtype) return idaapi.get_ascii_contents(ea, length, strtype) def GetStringType(ea): """ Get string type @param ea: linear address @return: One of ASCSTR_... constants """ ti = idaapi.opinfo_t() if idaapi.get_typeinfo(ea, 0, GetFlags(ea), ti): return ti.strtype else: return None ASCSTR_C = idaapi.ASCSTR_TERMCHR # C-style ASCII string ASCSTR_PASCAL = idaapi.ASCSTR_PASCAL # Pascal-style ASCII string (length byte) ASCSTR_LEN2 = idaapi.ASCSTR_LEN2 # Pascal-style, length is 2 bytes ASCSTR_UNICODE = idaapi.ASCSTR_UNICODE # Unicode string ASCSTR_LEN4 = idaapi.ASCSTR_LEN4 # Pascal-style, length is 4 bytes ASCSTR_ULEN2 = idaapi.ASCSTR_ULEN2 # Pascal-style Unicode, length is 2 bytes ASCSTR_ULEN4 = idaapi.ASCSTR_ULEN4 # Pascal-style Unicode, length is 4 bytes ASCSTR_LAST = idaapi.ASCSTR_LAST # Last string type # The following functions search for the specified byte # ea - address to start from # flag is combination of the following bits # returns BADADDR - not found def FindVoid (ea, flag): return idaapi.find_void(ea, flag) def FindCode (ea, flag): return idaapi.find_code(ea, flag) def FindData (ea, flag): return idaapi.find_data(ea, flag) def FindUnexplored (ea, flag): return idaapi.find_unknown(ea, flag) def FindExplored (ea, flag): return idaapi.find_defined(ea, flag) def FindImmediate (ea, flag, value): return idaapi.find_imm(ea, flag, value) SEARCH_UP = idaapi.SEARCH_UP # search backward SEARCH_DOWN = idaapi.SEARCH_DOWN # search forward SEARCH_NEXT = idaapi.SEARCH_NEXT # start the search at the next/prev item SEARCH_CASE = idaapi.SEARCH_CASE # search case-sensitive # (only for bin&txt search) SEARCH_REGEX = idaapi.SEARCH_REGEX # enable regular expressions (only for text) SEARCH_NOBRK = idaapi.SEARCH_NOBRK # don't test ctrl-break SEARCH_NOSHOW = idaapi.SEARCH_NOSHOW # don't display the search progress def FindText(ea, flag, y, x, searchstr): """ @param ea: start address @param flag: combination of SEARCH_* flags @param y: number of text line at ea to start from (0..MAX_ITEM_LINES) @param x: coordinate in this line @param searchstr: search string @return: ea of result or BADADDR if not found """ return idaapi.find_text(ea, y, x, searchstr, flag) def FindBinary(ea, flag, searchstr, radix=16): """ @param ea: start address @param flag: combination of SEARCH_* flags @param searchstr: a string as a user enters it for Search Text in Core @param radix: radix of the numbers (default=16) @return: ea of result or BADADDR if not found @note: Example: "41 42" - find 2 bytes 41h,42h (radix is 16) """ endea = flag & 1 and idaapi.cvar.inf.maxEA or idaapi.cvar.inf.minEA return idaapi.find_binary(ea, endea, searchstr, radix, flag) #---------------------------------------------------------------------------- # G L O B A L S E T T I N G S M A N I P U L A T I O N #---------------------------------------------------------------------------- def ChangeConfig(directive): """ Parse one or more ida.cfg config directives @param directive: directives to process, for example: PACK_DATABASE=2 @note: If the directives are erroneous, a fatal error will be generated. The changes will be effective only for the current session. """ return Eval('ChangeConfig("%s")' % directive) # The following functions allow you to set/get common parameters. # Please note that not all parameters can be set directly. def GetLongPrm(offset): """ """ val = _IDC_GetAttr(idaapi.cvar.inf, _INFMAP, offset) if offset == INF_PROCNAME: # procName is a character array # strip it at the terminating zero idx = val.find('\0') if idx != -1: val = val[:idx] return val def GetShortPrm(offset): return GetLongPrm(offset) def GetCharPrm (offset): return GetLongPrm(offset) def SetLongPrm (offset, value): """ """ if offset == INF_PROCNAME: raise NotImplementedError, "Please use idaapi.set_processor_type() to change processor" return _IDC_SetAttr(idaapi.cvar.inf, _INFMAP, offset, value) def SetShortPrm(offset, value): SetLongPrm(offset, value) def SetCharPrm (offset, value): SetLongPrm(offset, value) INF_VERSION = 3 # short; Version of database INF_PROCNAME = 5 # char[8]; Name of current processor INF_LFLAGS = 13 # char; IDP-dependent flags LFLG_PC_FPP = 0x01 # decode floating point processor # instructions? LFLG_PC_FLAT = 0x02 # Flat model? LFLG_64BIT = 0x04 # 64-bit program? LFLG_DBG_NOPATH = 0x08 # do not store input full path LFLG_SNAPSHOT = 0x10 # is memory snapshot? # in debugger process options INF_DEMNAMES = 14 # char; display demangled names as: DEMNAM_CMNT = 0 # comments DEMNAM_NAME = 1 # regular names DEMNAM_NONE = 2 # don't display INF_FILETYPE = 15 # short; type of input file (see ida.hpp) FT_EXE_OLD = 0 # MS DOS EXE File (obsolete) FT_COM_OLD = 1 # MS DOS COM File (obsolete) FT_BIN = 2 # Binary File FT_DRV = 3 # MS DOS Driver FT_WIN = 4 # New Executable (NE) FT_HEX = 5 # Intel Hex Object File FT_MEX = 6 # MOS Technology Hex Object File FT_LX = 7 # Linear Executable (LX) FT_LE = 8 # Linear Executable (LE) FT_NLM = 9 # Netware Loadable Module (NLM) FT_COFF = 10 # Common Object File Format (COFF) FT_PE = 11 # Portable Executable (PE) FT_OMF = 12 # Object Module Format FT_SREC = 13 # R-records FT_ZIP = 14 # ZIP file (this file is never loaded to IDA database) FT_OMFLIB = 15 # Library of OMF Modules FT_AR = 16 # ar library FT_LOADER = 17 # file is loaded using LOADER DLL FT_ELF = 18 # Executable and Linkable Format (ELF) FT_W32RUN = 19 # Watcom DOS32 Extender (W32RUN) FT_AOUT = 20 # Linux a.out (AOUT) FT_PRC = 21 # PalmPilot program file FT_EXE = 22 # MS DOS EXE File FT_COM = 23 # MS DOS COM File FT_AIXAR = 24 # AIX ar library INF_FCORESIZ = 17 INF_CORESTART = 21 INF_OSTYPE = 25 # short; FLIRT: OS type the program is for OSTYPE_MSDOS = 0x0001 OSTYPE_WIN = 0x0002 OSTYPE_OS2 = 0x0004 OSTYPE_NETW = 0x0008 INF_APPTYPE = 27 # short; FLIRT: Application type APPT_CONSOLE = 0x0001 # console APPT_GRAPHIC = 0x0002 # graphics APPT_PROGRAM = 0x0004 # EXE APPT_LIBRARY = 0x0008 # DLL APPT_DRIVER = 0x0010 # DRIVER APPT_1THREAD = 0x0020 # Singlethread APPT_MTHREAD = 0x0040 # Multithread APPT_16BIT = 0x0080 # 16 bit application APPT_32BIT = 0x0100 # 32 bit application INF_START_SP = 29 # long; SP register value at the start of # program execution INF_START_AF = 33 # short; Analysis flags: AF_FIXUP = 0x0001 # Create offsets and segments using fixup info AF_MARKCODE = 0x0002 # Mark typical code sequences as code AF_UNK = 0x0004 # Delete instructions with no xrefs AF_CODE = 0x0008 # Trace execution flow AF_PROC = 0x0010 # Create functions if call is present AF_USED = 0x0020 # Analyze and create all xrefs AF_FLIRT = 0x0040 # Use flirt signatures AF_PROCPTR = 0x0080 # Create function if data xref data->code32 exists AF_JFUNC = 0x0100 # Rename jump functions as j_... AF_NULLSUB = 0x0200 # Rename empty functions as nullsub_... AF_LVAR = 0x0400 # Create stack variables AF_TRACE = 0x0800 # Trace stack pointer AF_ASCII = 0x1000 # Create ascii string if data xref exists AF_IMMOFF = 0x2000 # Convert 32bit instruction operand to offset AF_DREFOFF = 0x4000 # Create offset if data xref to seg32 exists AF_FINAL = 0x8000 # Final pass of analysis INF_START_IP = 35 # long; IP register value at the start of # program execution INF_BEGIN_EA = 39 # long; Linear address of program entry point INF_MIN_EA = 43 # long; The lowest address used # in the program INF_MAX_EA = 47 # long; The highest address used # in the program - = 1 INF_OMIN_EA = 51 INF_OMAX_EA = 55 INF_LOW_OFF = 59 # long; low limit of voids INF_HIGH_OFF = 63 # long; high limit of voids INF_MAXREF = 67 # long; max xref depth INF_ASCII_BREAK = 71 # char; ASCII line break symbol INF_WIDE_HIGH_BYTE_FIRST = 72 INF_INDENT = 73 # char; Indention for instructions INF_COMMENT = 74 # char; Indention for comments INF_XREFNUM = 75 # char; Number of references to generate # = 0 - xrefs wont be generated at all INF_ENTAB = 76 # char; Use '\t' chars in the output file? INF_SPECSEGS = 77 INF_VOIDS = 78 # char; Display void marks? INF_SHOWAUTO = 80 # char; Display autoanalysis indicator? INF_AUTO = 81 # char; Autoanalysis is enabled? INF_BORDER = 82 # char; Generate borders? INF_NULL = 83 # char; Generate empty lines? INF_GENFLAGS = 84 # char; General flags: INFFL_LZERO = 0x01 # generate leading zeroes in numbers INFFL_LOADIDC = 0x04 # Loading an idc file t INF_SHOWPREF = 85 # char; Show line prefixes? INF_PREFSEG = 86 # char; line prefixes with segment name? INF_ASMTYPE = 87 # char; target assembler number (0..n) INF_BASEADDR = 88 # long; base paragraph of the program INF_XREFS = 92 # char; xrefs representation: SW_SEGXRF = 0x01 # show segments in xrefs? SW_XRFMRK = 0x02 # show xref type marks? SW_XRFFNC = 0x04 # show function offsets? SW_XRFVAL = 0x08 # show xref values? (otherwise-"...") INF_BINPREF = 93 # short; # of instruction bytes to show # in line prefix INF_CMTFLAG = 95 # char; comments: SW_RPTCMT = 0x01 # show repeatable comments? SW_ALLCMT = 0x02 # comment all lines? SW_NOCMT = 0x04 # no comments at all SW_LINNUM = 0x08 # show source line numbers SW_MICRO = 0x10 # show microcode (if implemented) INF_NAMETYPE = 96 # char; dummy names represenation type NM_REL_OFF = 0 NM_PTR_OFF = 1 NM_NAM_OFF = 2 NM_REL_EA = 3 NM_PTR_EA = 4 NM_NAM_EA = 5 NM_EA = 6 NM_EA4 = 7 NM_EA8 = 8 NM_SHORT = 9 NM_SERIAL = 10 INF_SHOWBADS = 97 # char; show bad instructions? # an instruction is bad if it appears # in the ash.badworks array INF_PREFFLAG = 98 # char; line prefix type: PREF_SEGADR = 0x01 # show segment addresses? PREF_FNCOFF = 0x02 # show function offsets? PREF_STACK = 0x04 # show stack pointer? INF_PACKBASE = 99 # char; pack database? INF_ASCIIFLAGS = 100 # uchar; ascii flags ASCF_GEN = 0x01 # generate ASCII names? ASCF_AUTO = 0x02 # ASCII names have 'autogenerated' bit? ASCF_SERIAL = 0x04 # generate serial names? ASCF_COMMENT = 0x10 # generate auto comment for ascii references? ASCF_SAVECASE = 0x20 # preserve case of ascii strings for identifiers INF_LISTNAMES = 101 # uchar; What names should be included in the list? LN_NORMAL = 0x01 # normal names LN_PUBLIC = 0x02 # public names LN_AUTO = 0x04 # autogenerated names LN_WEAK = 0x08 # weak names INF_ASCIIPREF = 102 # char[16];ASCII names prefix INF_ASCIISERNUM = 118 # ulong; serial number INF_ASCIIZEROES = 122 # char; leading zeroes INF_MF = 126 # uchar; Byte order: 1==MSB first INF_ORG = 127 # char; Generate 'org' directives? INF_ASSUME = 128 # char; Generate 'assume' directives? INF_CHECKARG = 129 # char; Check manual operands? INF_START_SS = 130 # long; value of SS at the start INF_START_CS = 134 # long; value of CS at the start INF_MAIN = 138 # long; address of main() INF_SHORT_DN = 142 # long; short form of demangled names INF_LONG_DN = 146 # long; long form of demangled names # see demangle.h for definitions INF_DATATYPES = 150 # long; data types allowed in data carousel INF_STRTYPE = 154 # long; current ascii string type # is considered as several bytes: # low byte: ASCSTR_TERMCHR = 0 # Character-terminated ASCII string ASCSTR_C = 0 # C-string, zero terminated ASCSTR_PASCAL = 1 # Pascal-style ASCII string (length byte) ASCSTR_LEN2 = 2 # Pascal-style, length is 2 bytes ASCSTR_UNICODE = 3 # Unicode string ASCSTR_LEN4 = 4 # Delphi string, length is 4 bytes ASCSTR_ULEN2 = 5 # Pascal-style Unicode, length is 2 bytes ASCSTR_ULEN4 = 6 # Pascal-style Unicode, length is 4 bytes # = 2nd byte - termination chracters for ASCSTR_TERMCHR: #STRTERM1(strtype) ((strtype>>8)&0xFF) # = 3d byte: #STRTERM2(strtype) ((strtype>>16)&0xFF) # The termination characters are kept in # the = 2nd and 3d bytes of string type # if the second termination character is # '\0', then it is ignored. INF_AF2 = 158 # ushort; Analysis flags 2 AF2_JUMPTBL = 0x0001 # Locate and create jump tables AF2_DODATA = 0x0002 # Coagulate data segs in final pass AF2_HFLIRT = 0x0004 # Automatically hide library functions AF2_STKARG = 0x0008 # Propagate stack argument information AF2_REGARG = 0x0010 # Propagate register argument information AF2_CHKUNI = 0x0020 # Check for unicode strings AF2_SIGCMT = 0x0040 # Append a signature name comment for recognized anonymous library functions AF2_SIGMLT = 0x0080 # Allow recognition of several copies of the same function AF2_FTAIL = 0x0100 # Create function tails AF2_DATOFF = 0x0200 # Automatically convert data to offsets AF2_ANORET = 0x0400 # Perform 'no-return' analysis AF2_VERSP = 0x0800 # Perform full stack pointer analysis AF2_DOCODE = 0x1000 # Coagulate code segs at the final pass AF2_TRFUNC = 0x2000 # Truncate functions upon code deletion AF2_PURDAT = 0x4000 # Control flow to data segment is ignored INF_NAMELEN = 160 # ushort; max name length (without zero byte) INF_MARGIN = 162 # ushort; max length of data lines INF_LENXREF = 164 # ushort; max length of line with xrefs INF_LPREFIX = 166 # char[16];prefix of local names # if a new name has this prefix, # it will be automatically converted to a local name INF_LPREFIXLEN = 182 # uchar; length of the lprefix INF_COMPILER = 183 # uchar; compiler COMP_MASK = 0x0F # mask to apply to get the pure compiler id COMP_UNK = 0x00 # Unknown COMP_MS = 0x01 # Visual C++ COMP_BC = 0x02 # Borland C++ COMP_WATCOM = 0x03 # Watcom C++ COMP_GNU = 0x06 # GNU C++ COMP_VISAGE = 0x07 # Visual Age C++ COMP_BP = 0x08 # Delphi INF_MODEL = 184 # uchar; memory model & calling convention INF_SIZEOF_INT = 185 # uchar; sizeof(int) INF_SIZEOF_BOOL = 186 # uchar; sizeof(bool) INF_SIZEOF_ENUM = 187 # uchar; sizeof(enum) INF_SIZEOF_ALGN = 188 # uchar; default alignment INF_SIZEOF_SHORT = 189 INF_SIZEOF_LONG = 190 INF_SIZEOF_LLONG = 191 INF_CHANGE_COUNTER = 192 # database change counter; keeps track of byte and segment modifications INF_SIZEOF_LDBL = 196 # uchar; sizeof(long double) # Redefine these offsets for 64-bit version if __EA64__: INF_CORESTART = 25 INF_OSTYPE = 33 INF_APPTYPE = 35 INF_START_SP = 37 INF_AF = 45 INF_START_IP = 47 INF_BEGIN_EA = 55 INF_MIN_EA = 63 INF_MAX_EA = 71 INF_OMIN_EA = 79 INF_OMAX_EA = 87 INF_LOW_OFF = 95 INF_HIGH_OFF = 103 INF_MAXREF = 111 INF_ASCII_BREAK = 119 INF_WIDE_HIGH_BYTE_FIRST = 120 INF_INDENT = 121 INF_COMMENT = 122 INF_XREFNUM = 123 INF_ENTAB = 124 INF_SPECSEGS = 125 INF_VOIDS = 126 INF_SHOWAUTO = 128 INF_AUTO = 129 INF_BORDER = 130 INF_NULL = 131 INF_GENFLAGS = 132 INF_SHOWPREF = 133 INF_PREFSEG = 134 INF_ASMTYPE = 135 INF_BASEADDR = 136 INF_XREFS = 144 INF_BINPREF = 145 INF_CMTFLAG = 147 INF_NAMETYPE = 148 INF_SHOWBADS = 149 INF_PREFFLAG = 150 INF_PACKBASE = 151 INF_ASCIIFLAGS = 152 INF_LISTNAMES = 153 INF_ASCIIPREF = 154 INF_ASCIISERNUM = 170 INF_ASCIIZEROES = 178 INF_MF = 182 INF_ORG = 183 INF_ASSUME = 184 INF_CHECKARG = 185 INF_START_SS = 186 INF_START_CS = 194 INF_MAIN = 202 INF_SHORT_DN = 210 INF_LONG_DN = 218 INF_DATATYPES = 226 INF_STRTYPE = 234 INF_AF2 = 242 INF_NAMELEN = 244 INF_MARGIN = 246 INF_LENXREF = 248 INF_LPREFIX = 250 INF_LPREFIXLEN = 266 INF_COMPILER = 267 INF_MODEL = 268 INF_SIZEOF_INT = 269 INF_SIZEOF_BOOL = 270 INF_SIZEOF_ENUM = 271 INF_SIZEOF_ALGN = 272 INF_SIZEOF_SHORT = 273 INF_SIZEOF_LONG = 274 INF_SIZEOF_LLONG = 275 INF_CHANGE_COUNTER = 276 INF_SIZEOF_LBDL = 280 _INFMAP = { INF_VERSION : (False, 'version'), # short; Version of database INF_PROCNAME : (False, 'procName'), # char[8]; Name of current processor INF_LFLAGS : (False, 'lflags'), # char; IDP-dependent flags INF_DEMNAMES : (False, 'demnames'), # char; display demangled names as: INF_FILETYPE : (False, 'filetype'), # short; type of input file (see ida.hpp) INF_FCORESIZ : (False, 'fcoresize'), INF_CORESTART : (False, 'corestart'), INF_OSTYPE : (False, 'ostype'), # short; FLIRT: OS type the program is for INF_APPTYPE : (False, 'apptype'), # short; FLIRT: Application type INF_START_SP : (False, 'startSP'), # long; SP register value at the start of INF_START_AF : (False, 'af'), # short; Analysis flags: INF_START_IP : (False, 'startIP'), # long; IP register value at the start of INF_BEGIN_EA : (False, 'beginEA'), # long; Linear address of program entry point INF_MIN_EA : (False, 'minEA'), # long; The lowest address used INF_MAX_EA : (False, 'maxEA'), # long; The highest address used INF_OMIN_EA : (False, 'ominEA'), INF_OMAX_EA : (False, 'omaxEA'), INF_LOW_OFF : (False, 'lowoff'), # long; low limit of voids INF_HIGH_OFF : (False, 'highoff'), # long; high limit of voids INF_MAXREF : (False, 'maxref'), # long; max xref depth INF_ASCII_BREAK : (False, 'ASCIIbreak'), # char; ASCII line break symbol INF_WIDE_HIGH_BYTE_FIRST : (False, 'wide_high_byte_first'), INF_INDENT : (False, 'indent'), # char; Indention for instructions INF_COMMENT : (False, 'comment'), # char; Indention for comments INF_XREFNUM : (False, 'xrefnum'), # char; Number of references to generate INF_ENTAB : (False, 's_entab'), # char; Use '\t' chars in the output file? INF_SPECSEGS : (False, 'specsegs'), INF_VOIDS : (False, 's_void'), # char; Display void marks? INF_SHOWAUTO : (False, 's_showauto'), # char; Display autoanalysis indicator? INF_AUTO : (False, 's_auto'), # char; Autoanalysis is enabled? INF_BORDER : (False, 's_limiter'), # char; Generate borders? INF_NULL : (False, 's_null'), # char; Generate empty lines? INF_GENFLAGS : (False, 's_genflags'), # char; General flags: INF_SHOWPREF : (False, 's_showpref'), # char; Show line prefixes? INF_PREFSEG : (False, 's_prefseg'), # char; line prefixes with segment name? INF_ASMTYPE : (False, 'asmtype'), # char; target assembler number (0..n) INF_BASEADDR : (False, 'baseaddr'), # long; base paragraph of the program INF_XREFS : (False, 's_xrefflag'), # char; xrefs representation: INF_BINPREF : (False, 'binSize'), # short; # of instruction bytes to show INF_CMTFLAG : (False, 's_cmtflg'), # char; comments: INF_NAMETYPE : (False, 'nametype'), # char; dummy names represenation type INF_SHOWBADS : (False, 's_showbads'), # char; show bad instructions? INF_PREFFLAG : (False, 's_prefflag'), # char; line prefix type: INF_PACKBASE : (False, 's_packbase'), # char; pack database? INF_ASCIIFLAGS : (False, 'asciiflags'), # uchar; ascii flags INF_LISTNAMES : (False, 'listnames'), # uchar; What names should be included in the list? INF_ASCIIPREF : (False, 'ASCIIpref'), # char[16];ASCII names prefix INF_ASCIISERNUM : (False, 'ASCIIsernum'), # ulong; serial number INF_ASCIIZEROES : (False, 'ASCIIzeroes'), # char; leading zeroes INF_MF : (False, 'mf'), # uchar; Byte order: 1==MSB first INF_ORG : (False, 's_org'), # char; Generate 'org' directives? INF_ASSUME : (False, 's_assume'), # char; Generate 'assume' directives? INF_CHECKARG : (False, 's_checkarg'), # char; Check manual operands? INF_START_SS : (False, 'start_ss'), # long; value of SS at the start INF_START_CS : (False, 'start_cs'), # long; value of CS at the start INF_MAIN : (False, 'main'), # long; address of main() INF_SHORT_DN : (False, 'short_demnames'), # long; short form of demangled names INF_LONG_DN : (False, 'long_demnames'), # long; long form of demangled names INF_DATATYPES : (False, 'datatypes'), # long; data types allowed in data carousel INF_STRTYPE : (False, 'strtype'), # long; current ascii string type INF_AF2 : (False, 'af2'), # ushort; Analysis flags 2 INF_NAMELEN : (False, 'namelen'), # ushort; max name length (without zero byte) INF_MARGIN : (False, 'margin'), # ushort; max length of data lines INF_LENXREF : (False, 'lenxref'), # ushort; max length of line with xrefs INF_LPREFIX : (False, 'lprefix'), # char[16];prefix of local names INF_LPREFIXLEN : (False, 'lprefixlen'), # uchar; length of the lprefix INF_COMPILER : (False, 'cc') # uchar; compiler #INF_MODEL = 184 # uchar; memory model & calling convention #INF_SIZEOF_INT = 185 # uchar; sizeof(int) #INF_SIZEOF_BOOL = 186 # uchar; sizeof(bool) #INF_SIZEOF_ENUM = 187 # uchar; sizeof(enum) #INF_SIZEOF_ALGN = 188 # uchar; default alignment #INF_SIZEOF_SHORT = 189 #INF_SIZEOF_LONG = 190 #INF_SIZEOF_LLONG = 191 } def SetProcessorType (processor, level): """ Change current processor @param processor: name of processor in short form. run 'ida ?' to get list of allowed processor types @param level: the power of request: - SETPROC_COMPAT - search for the processor type in the current module - SETPROC_ALL - search for the processor type in all modules only if there were not calls with SETPROC_USER - SETPROC_USER - search for the processor type in all modules and prohibit level SETPROC_USER - SETPROC_FATAL - can be combined with previous bits. means that if the processor type can't be set, IDA should display an error message and exit. """ return idaapi.set_processor_type(processor, level) SETPROC_COMPAT = idaapi.SETPROC_COMPAT SETPROC_ALL = idaapi.SETPROC_ALL SETPROC_USER = idaapi.SETPROC_USER SETPROC_FATAL = idaapi.SETPROC_FATAL def SetPrcsr(processor): return SetProcessorType(processor, SETPROC_COMPAT) def Batch(batch): """ Enable/disable batch mode of operation @param batch: Batch mode 0 - ida will display dialog boxes and wait for the user input 1 - ida will not display dialog boxes, warnings, etc. @return: old balue of batch flag """ batch_prev = idaapi.cvar.batch idaapi.cvar.batch = batch return batch_prev #---------------------------------------------------------------------------- # I N T E R A C T I O N W I T H T H E U S E R #---------------------------------------------------------------------------- def AskStr(defval, prompt): """ Ask the user to enter a string @param defval: the default string value. This value will appear in the dialog box. @param prompt: the prompt to display in the dialog box @return: the entered string or 0. """ return idaapi.askstr(0, defval, prompt) def AskFile(forsave, mask, prompt): """ Ask the user to choose a file @param forsave: 0: "Open" dialog box, 1: "Save" dialog box @param mask: the input file mask as "*.*" or the default file name. @param prompt: the prompt to display in the dialog box @return: the selected file or 0. """ return idaapi.askfile_c(forsave, mask, prompt) def AskAddr(defval, prompt): """ Ask the user to enter an address @param defval: the default address value. This value will appear in the dialog box. @param prompt: the prompt to display in the dialog box @return: the entered address or BADADDR. """ return idaapi.askaddr(defval, prompt) def AskLong(defval, prompt): """ Ask the user to enter a number @param defval: the default value. This value will appear in the dialog box. @param prompt: the prompt to display in the dialog box @return: the entered number or -1. """ return idaapi.asklong(defval, prompt) def AskSeg(defval, prompt): """ Ask the user to enter a segment value @param defval: the default value. This value will appear in the dialog box. @param prompt: the prompt to display in the dialog box @return: the entered segment selector or BADSEL. """ return idaapi.askseg(defval, prompt) def AskIdent(defval, prompt): """ Ask the user to enter an identifier @param defval: the default identifier. This value will appear in the dialog box. @param prompt: the prompt to display in the dialog box @return: the entered identifier or 0. """ return idaapi.askident(defval, prompt) def AskYN(defval, prompt): """ Ask the user a question and let him answer Yes/No/Cancel @param defval: the default answer. This answer will be selected if the user presses Enter. -1:cancel,0-no,1-ok @param prompt: the prompt to display in the dialog box @return: -1:cancel,0-no,1-ok """ return idaapi.askyn_c(defval, prompt) def Message(msg): """ Display a message in the message window @param msg: message to print (formatting is done in Python) This function can be used to debug IDC scripts """ idaapi.msg(msg) def Warning(msg): """ Display a message in a message box @param msg: message to print (formatting is done in Python) This function can be used to debug IDC scripts The user will be able to hide messages if they appear twice in a row on the screen """ idaapi.warning(msg) def Fatal(format): """ Display a fatal message in a message box and quit IDA @param format: message to print """ idaapi.error(format) def SetStatus(status): """ Change IDA indicator. @param status: new status @return: the previous status. """ return idaapi.setStat(status) IDA_STATUS_READY = 0 # READY IDA is idle IDA_STATUS_THINKING = 1 # THINKING Analyzing but the user may press keys IDA_STATUS_WAITING = 2 # WAITING Waiting for the user input IDA_STATUS_WORK = 3 # BUSY IDA is busy def Refresh(): """ Refresh all disassembly views """ idaapi.refresh_idaview_anyway() def RefreshLists(): """ Refresh all list views (names, functions, etc) """ idaapi.refresh_lists() #---------------------------------------------------------------------------- # S E G M E N T A T I O N #---------------------------------------------------------------------------- def AskSelector(sel): """ Get a selector value @param sel: the selector number @return: selector value if found otherwise the input value (sel) @note: selector values are always in paragraphs """ s = idaapi.sel_pointer() base = idaapi.ea_pointer() res,tmp = idaapi.getn_selector(sel, s.cast(), base.cast()) if not res: return sel else: return base.value() def FindSelector(val): """ Find a selector which has the specifed value @param val: value to search for @return: the selector number if found, otherwise the input value (val & 0xFFFF) @note: selector values are always in paragraphs """ return idaapi.find_selector(val) & 0xFFFF def SetSelector(sel, value): """ Set a selector value @param sel: the selector number @param value: value of selector @return: None @note: ida supports up to 4096 selectors. if 'sel' == 'val' then the selector is destroyed because it has no significance """ return idaapi.set_selector(sel, value) def DelSelector(sel): """ Delete a selector @param sel: the selector number to delete @return: None @note: if the selector is found, it will be deleted """ return idaapi.del_selector(sel) def FirstSeg(): """ Get first segment @return: address of the start of the first segment BADADDR - no segments are defined """ seg = idaapi.get_first_seg() if not seg: return BADADDR else: return seg.startEA def NextSeg(ea): """ Get next segment @param ea: linear address @return: start of the next segment BADADDR - no next segment """ nextseg = idaapi.get_next_seg(ea) if not nextseg: return BADADDR else: return nextseg.startEA return BADADDR def SegStart(ea): """ Get start address of a segment @param ea: any address in the segment @return: start of segment BADADDR - the specified address doesn't belong to any segment """ seg = idaapi.getseg(ea) if not seg: return BADADDR else: return seg.startEA def SegEnd(ea): """ Get end address of a segment @param ea: any address in the segment @return: end of segment (an address past end of the segment) BADADDR - the specified address doesn't belong to any segment """ seg = idaapi.getseg(ea) if not seg: return BADADDR else: return seg.endEA def SegName(ea): """ Get name of a segment @param ea: any address in the segment @return: "" - no segment at the specified address """ seg = idaapi.getseg(ea) if not seg: return "" else: name = idaapi.get_true_segm_name(seg) if not name: return "" else: return name def AddSeg(startea, endea, base, use32, align, comb): """ Create a new segment @param startea: linear address of the start of the segment @param endea: linear address of the end of the segment this address will not belong to the segment 'endea' should be higher than 'startea' @param base: base paragraph or selector of the segment. a paragraph is 16byte memory chunk. If a selector value is specified, the selector should be already defined. @param use32: 0: 16bit segment, 1: 32bit segment, 2: 64bit segment @param align: segment alignment. see below for alignment values @param comb: segment combination. see below for combination values. @return: 0-failed, 1-ok """ s = idaapi.segment_t() s.startEA = startea s.endEA = endea s.sel = idaapi.setup_selector(base) s.bitness = use32 s.align = align s.comb = comb return idaapi.add_segm_ex(s, "", "", idaapi.ADDSEG_NOSREG) def DelSeg(ea, flags): """ Delete a segment @param ea: any address in the segment @param flags: combination of SEGMOD_* flags @return: boolean success """ return idaapi.del_segm(ea, flags) SEGMOD_KILL = idaapi.SEGMOD_KILL # disable addresses if segment gets # shrinked or deleted SEGMOD_KEEP = idaapi.SEGMOD_KEEP # keep information (code & data, etc) SEGMOD_SILENT = idaapi.SEGMOD_SILENT # be silent def SetSegBounds(ea, startea, endea, flags): """ Change segment boundaries @param ea: any address in the segment @param startea: new start address of the segment @param endea: new end address of the segment @param flags: combination of SEGMOD_... flags @return: boolean success """ return idaapi.set_segm_start(ea, startea, flags) & \ idaapi.set_segm_end(ea, endea, flags) def RenameSeg(ea, name): """ Change name of the segment @param ea: any address in the segment @param name: new name of the segment @return: success (boolean) """ seg = idaapi.getseg(ea) if not seg: return False return idaapi.set_segm_name(seg, name) def SetSegClass(ea, segclass): """ Change class of the segment @param ea: any address in the segment @param segclass: new class of the segment @return: success (boolean) """ seg = idaapi.getseg(ea) if not seg: return False return idaapi.set_segm_class(seg, segclass) def SegAlign(ea, alignment): """ Change alignment of the segment @param ea: any address in the segment @param alignment: new alignment of the segment (one of the sa... constants) @return: success (boolean) """ return SetSegmentAttr(ea, SEGATTR_ALIGN, alignment) saAbs = idaapi.saAbs # Absolute segment. saRelByte = idaapi.saRelByte # Relocatable, byte aligned. saRelWord = idaapi.saRelWord # Relocatable, word (2-byte, 16-bit) aligned. saRelPara = idaapi.saRelPara # Relocatable, paragraph (16-byte) aligned. saRelPage = idaapi.saRelPage # Relocatable, aligned on 256-byte boundary # (a "page" in the original Intel specification). saRelDble = idaapi.saRelDble # Relocatable, aligned on a double word # (4-byte) boundary. This value is used by # the PharLap OMF for the same alignment. saRel4K = idaapi.saRel4K # This value is used by the PharLap OMF for # page (4K) alignment. It is not supported # by LINK. saGroup = idaapi.saGroup # Segment group saRel32Bytes = idaapi.saRel32Bytes # 32 bytes saRel64Bytes = idaapi.saRel64Bytes # 64 bytes saRelQword = idaapi.saRelQword # 8 bytes def SegComb(segea, comb): """ Change combination of the segment @param segea: any address in the segment @param comb: new combination of the segment (one of the sc... constants) @return: success (boolean) """ return SetSegmentAttr(segea, SEGATTR_COMB, comb) scPriv = idaapi.scPriv # Private. Do not combine with any other program # segment. scPub = idaapi.scPub # Public. Combine by appending at an offset that # meets the alignment requirement. scPub2 = idaapi.scPub2 # As defined by Microsoft, same as C=2 (public). scStack = idaapi.scStack # Stack. Combine as for C=2. This combine type # forces byte alignment. scCommon = idaapi.scCommon # Common. Combine by overlay using maximum size. scPub3 = idaapi.scPub3 # As defined by Microsoft, same as C=2 (public). def SetSegAddressing(ea, bitness): """ Change segment addressing @param ea: any address in the segment @param bitness: 0: 16bit, 1: 32bit, 2: 64bit @return: success (boolean) """ seg = idaapi.getseg(ea) if not seg: return False seg.bitness = bitness return True def SegByName(segname): """ Get segment by name @param segname: name of segment @return: segment selector or BADADDR """ seg = idaapi.get_segm_by_name(segname) if not seg: return BADADDR return seg.startEA def SetSegDefReg(ea, reg, value): """ Set default segment register value for a segment @param ea: any address in the segment if no segment is present at the specified address then all segments will be affected @param reg: name of segment register @param value: default value of the segment register. -1-undefined. """ seg = idaapi.getseg(ea) reg = idaapi.str2reg(reg); if seg and reg >= 0: return idaapi.SetDefaultRegisterValue(seg, reg, value) else: return False def SetSegmentType(segea, segtype): """ Set segment type @param segea: any address within segment @param segtype: new segment type: @return: !=0 - ok """ seg = idaapi.getseg(segea) if not seg: return False seg.type = segtype return seg.update() SEG_NORM = idaapi.SEG_NORM SEG_XTRN = idaapi.SEG_XTRN # * segment with 'extern' definitions # no instructions are allowed SEG_CODE = idaapi.SEG_CODE # pure code segment SEG_DATA = idaapi.SEG_DATA # pure data segment SEG_IMP = idaapi.SEG_IMP # implementation segment SEG_GRP = idaapi.SEG_GRP # * group of segments # no instructions are allowed SEG_NULL = idaapi.SEG_NULL # zero-length segment SEG_UNDF = idaapi.SEG_UNDF # undefined segment type SEG_BSS = idaapi.SEG_BSS # uninitialized segment SEG_ABSSYM = idaapi.SEG_ABSSYM # * segment with definitions of absolute symbols # no instructions are allowed SEG_COMM = idaapi.SEG_COMM # * segment with communal definitions # no instructions are allowed SEG_IMEM = idaapi.SEG_IMEM # internal processor memory & sfr (8051) def GetSegmentAttr(segea, attr): """ Get segment attribute @param segea: any address within segment @param attr: one of SEGATTR_... constants """ seg = idaapi.getseg(segea) assert seg, "could not find segment at 0x%x" % segea if attr in [ SEGATTR_ES, SEGATTR_CS, SEGATTR_SS, SEGATTR_DS, SEGATTR_FS, SEGATTR_GS ]: return idaapi.get_defsr(seg, _SEGATTRMAP[attr]) else: return _IDC_GetAttr(seg, _SEGATTRMAP, attr) def SetSegmentAttr(segea, attr, value): """ Set segment attribute @param segea: any address within segment @param attr: one of SEGATTR_... constants @note: Please note that not all segment attributes are modifiable. Also some of them should be modified using special functions like SetSegAddressing, etc. """ seg = idaapi.getseg(segea) assert seg, "could not find segment at 0x%x" % segea if attr in [ SEGATTR_ES, SEGATTR_CS, SEGATTR_SS, SEGATTR_DS, SEGATTR_FS, SEGATTR_GS ]: idaapi.set_defsr(seg, _SEGATTRMAP[attr], value) else: _IDC_SetAttr(seg, _SEGATTRMAP, attr, value) return seg.update() SEGATTR_START = 0 # starting address SEGATTR_END = 4 # ending address SEGATTR_ORGBASE = 16 SEGATTR_ALIGN = 20 # alignment SEGATTR_COMB = 21 # combination SEGATTR_PERM = 22 # permissions SEGATTR_BITNESS = 23 # bitness (0: 16, 1: 32, 2: 64 bit segment) # Note: modifying the attribute directly does # not lead to the reanalysis of the segment. # Using SetSegAddressing() is more correct. SEGATTR_FLAGS = 24 # segment flags SEGATTR_SEL = 26 # segment selector SEGATTR_ES = 30 # default ES value SEGATTR_CS = 34 # default CS value SEGATTR_SS = 38 # default SS value SEGATTR_DS = 42 # default DS value SEGATTR_FS = 46 # default FS value SEGATTR_GS = 50 # default GS value SEGATTR_TYPE = 94 # segment type SEGATTR_COLOR = 95 # segment color # Redefining these for 64-bit if __EA64__: SEGATTR_START = 0 SEGATTR_END = 8 SEGATTR_ORGBASE = 32 SEGATTR_ALIGN = 40 SEGATTR_COMB = 41 SEGATTR_PERM = 42 SEGATTR_BITNESS = 43 SEGATTR_FLAGS = 44 SEGATTR_SEL = 46 SEGATTR_ES = 54 SEGATTR_CS = 62 SEGATTR_SS = 70 SEGATTR_DS = 78 SEGATTR_FS = 86 SEGATTR_GS = 94 SEGATTR_TYPE = 182 SEGATTR_COLOR = 183 _SEGATTRMAP = { SEGATTR_START : (True, 'startEA'), SEGATTR_END : (True, 'endEA'), SEGATTR_ORGBASE : (False, 'orgbase'), SEGATTR_ALIGN : (False, 'align'), SEGATTR_COMB : (False, 'comb'), SEGATTR_PERM : (False, 'perm'), SEGATTR_BITNESS : (False, 'bitness'), SEGATTR_FLAGS : (False, 'flags'), SEGATTR_SEL : (False, 'sel'), SEGATTR_ES : (False, 0), SEGATTR_CS : (False, 1), SEGATTR_SS : (False, 2), SEGATTR_DS : (False, 3), SEGATTR_FS : (False, 4), SEGATTR_GS : (False, 5), SEGATTR_TYPE : (False, 'type'), SEGATTR_COLOR : (False, 'color'), } # Valid segment flags SFL_COMORG = 0x01 # IDP dependent field (IBM PC: if set, ORG directive is not commented out) SFL_OBOK = 0x02 # orgbase is present? (IDP dependent field) SFL_HIDDEN = 0x04 # is the segment hidden? SFL_DEBUG = 0x08 # is the segment created for the debugger? SFL_LOADER = 0x10 # is the segment created by the loader? SFL_HIDETYPE = 0x20 # hide segment type (do not print it in the listing) def MoveSegm(ea, to, flags): """ Move a segment to a new address This function moves all information to the new address It fixes up address sensitive information in the kernel The total effect is equal to reloading the segment to the target address @param ea: any address within the segment to move @param to: new segment start address @param flags: combination MFS_... constants @returns: MOVE_SEGM_... error code """ seg = idaapi.getseg(ea) if not seg: return MOVE_SEGM_PARAM return idaapi.move_segm(seg, to, flags) MSF_SILENT = 0x0001 # don't display a "please wait" box on the screen MSF_NOFIX = 0x0002 # don't call the loader to fix relocations MSF_LDKEEP = 0x0004 # keep the loader in the memory (optimization) MSF_FIXONCE = 0x0008 # valid for rebase_program(): call loader only once MOVE_SEGM_OK = 0 # all ok MOVE_SEGM_PARAM = -1 # The specified segment does not exist MOVE_SEGM_ROOM = -2 # Not enough free room at the target address MOVE_SEGM_IDP = -3 # IDP module forbids moving the segment MOVE_SEGM_CHUNK = -4 # Too many chunks are defined, can't move MOVE_SEGM_LOADER = -5 # The segment has been moved but the loader complained MOVE_SEGM_ODD = -6 # Can't move segments by an odd number of bytes def rebase_program(delta, flags): """ Rebase the whole program by 'delta' bytes @param delta: number of bytes to move the program @param flags: combination of MFS_... constants it is recommended to use MSF_FIXONCE so that the loader takes care of global variables it stored in the database @returns: error code MOVE_SEGM_... """ return idaapi.rebase_program(delta, flags) def SetStorageType(startEA, endEA, stt): """ Set storage type @param startEA: starting address @param endEA: ending address @param stt: new storage type, one of STT_VA and STT_MM @returns: 0 - ok, otherwise internal error code """ return idaapi.change_storage_type(startEA, endEA, stt) STT_VA = 0 # regular storage: virtual arrays, an explicit flag for each byte STT_MM = 1 # memory map: sparse storage. useful for huge objects #---------------------------------------------------------------------------- # C R O S S R E F E R E N C E S #---------------------------------------------------------------------------- # Flow types (combine with XREF_USER!): fl_CF = 16 # Call Far fl_CN = 17 # Call Near fl_JF = 18 # Jump Far fl_JN = 19 # Jump Near fl_F = 21 # Ordinary flow XREF_USER = 32 # All user-specified xref types # must be combined with this bit # Mark exec flow 'from' 'to' def AddCodeXref(From, To, flowtype): """ """ return idaapi.add_cref(From, To, flowtype) def DelCodeXref(From, To, undef): """ Unmark exec flow 'from' 'to' @param undef: make 'To' undefined if no more references to it @returns: 1 - planned to be made undefined """ return idaapi.del_cref(From, To, undef) # The following functions include the ordinary flows: # (the ordinary flow references are returned first) def Rfirst(From): """ Get first code xref from 'From' """ return idaapi.get_first_cref_from(From) def Rnext(From, current): """ Get next code xref from """ return idaapi.get_next_cref_from(From, current) def RfirstB(To): """ Get first code xref to 'To' """ return idaapi.get_first_cref_to(To) def RnextB(To, current): """ Get next code xref to 'To' """ return idaapi.get_next_cref_to(To, current) # The following functions don't take into account the ordinary flows: def Rfirst0(From): """ Get first xref from 'From' """ return idaapi.get_first_fcref_from(From) def Rnext0(From, current): """ Get next xref from """ return idaapi.get_next_fcref_from(From, current) def RfirstB0(To): """ Get first xref to 'To' """ return idaapi.get_first_fcref_to(To) def RnextB0(To, current): """ Get next xref to 'To' """ return idaapi.get_next_fcref_to(To, current) # Data reference types (combine with XREF_USER!): dr_O = idaapi.dr_O # Offset dr_W = idaapi.dr_W # Write dr_R = idaapi.dr_R # Read dr_T = idaapi.dr_T # Text (names in manual operands) dr_I = idaapi.dr_I # Informational def add_dref(From, To, drefType): """ Create Data Ref """ return idaapi.add_dref(From, To, drefType) def del_dref(From, To): """ Unmark Data Ref """ return idaapi.del_dref(From, To) def Dfirst(From): """ Get first data xref from 'From' """ return idaapi.get_first_dref_from(From) def Dnext(From, current): """ Get next data xref from 'From' """ return idaapi.get_next_dref_from(From, current) def DfirstB(To): """ Get first data xref to 'To' """ return idaapi.get_first_dref_to(To) def DnextB(To, current): """ Get next data xref to 'To' """ return idaapi.get_next_dref_to(To, current) def XrefType(): """ Return type of the last xref obtained by [RD]first/next[B0] functions. @return: constants fl_* or dr_* """ raise DeprecatedIDCError, "use XrefsFrom() XrefsTo() from idautils instead." #---------------------------------------------------------------------------- # F I L E I / O #---------------------------------------------------------------------------- def fopen(f, mode): raise DeprecatedIDCError, "fopen() deprecated. Use Python file objects instead." def fclose(handle): raise DeprecatedIDCError, "fclose() deprecated. Use Python file objects instead." def filelength(handle): raise DeprecatedIDCError, "filelength() deprecated. Use Python file objects instead." def fseek(handle, offset, origin): raise DeprecatedIDCError, "fseek() deprecated. Use Python file objects instead." def ftell(handle): raise DeprecatedIDCError, "ftell() deprecated. Use Python file objects instead." def LoadFile(filepath, pos, ea, size): """ Load file into IDA database @param filepath: path to input file @param pos: position in the file @param ea: linear address to load @param size: number of bytes to load @return: 0 - error, 1 - ok """ li = idaapi.open_linput(filepath, False) if li: retval = idaapi.file2base(li, pos, ea, ea+size, False) idaapi.close_linput(li) return retval else: return 0 def loadfile(filepath, pos, ea, size): return LoadFile(filepath, pos, ea, size) def SaveFile(filepath, pos, ea, size): """ Save from IDA database to file @param filepath: path to output file @param pos: position in the file @param ea: linear address to save from @param size: number of bytes to save @return: 0 - error, 1 - ok """ of = idaapi.fopenWB(filepath) if of: retval = idaapi.base2file(of, pos, ea, ea+size) idaapi.eclose(of) return retval else: return 0 def savefile(filepath, pos, ea, size): return SaveFile(filepath, pos, ea, size) def fgetc(handle): raise DeprecatedIDCError, "fgetc() deprecated. Use Python file objects instead." def fputc(byte, handle): raise DeprecatedIDCError, "fputc() deprecated. Use Python file objects instead." def fprintf(handle, format, *args): raise DeprecatedIDCError, "fprintf() deprecated. Use Python file objects instead." def readshort(handle, mostfirst): raise DeprecatedIDCError, "readshort() deprecated. Use Python file objects instead." def readlong(handle, mostfirst): raise DeprecatedIDCError, "readlong() deprecated. Use Python file objects instead." def writeshort(handle, word, mostfirst): raise DeprecatedIDCError, "writeshort() deprecated. Use Python file objects instead." def writelong(handle, dword, mostfirst): raise DeprecatedIDCError, "writelong() deprecated. Use Python file objects instead." def readstr(handle): raise DeprecatedIDCError, "readstr() deprecated. Use Python file objects instead." def writestr(handle, s): raise DeprecatedIDCError, "writestr() deprecated. Use Python file objects instead." # ---------------------------------------------------------------------------- # F U N C T I O N S # ---------------------------------------------------------------------------- def MakeFunction(start, end): """ Create a function @param start: function bounds @param end: function bounds If the function end address is BADADDR, then IDA will try to determine the function bounds automatically. IDA will define all necessary instructions to determine the function bounds. @return: !=0 - ok @note: an instruction should be present at the start address """ return idaapi.add_func(start, end) def DelFunction(ea): """ Delete a function @param ea: any address belonging to the function @return: !=0 - ok """ return idaapi.del_func(ea) def SetFunctionEnd(ea, end): """ Change function end address @param ea: any address belonging to the function @param end: new function end address @return: !=0 - ok """ return idaapi.func_setend(ea, end) def NextFunction(ea): """ Find next function @param ea: any address belonging to the function @return: -1 - no more functions otherwise returns the next function start address """ func = idaapi.get_next_func(ea) if not func: return BADADDR else: return func.startEA def PrevFunction(ea): """ Find previous function @param ea: any address belonging to the function @return: -1 - no more functions otherwise returns the previous function start address """ func = idaapi.get_prev_func(ea) if not func: return BADADDR else: return func.startEA def GetFunctionAttr(ea, attr): """ Get a function attribute @param ea: any address belonging to the function @param attr: one of FUNCATTR_... constants @return: -1 - error otherwise returns the attribute value """ func = idaapi.get_func(ea) if func: return _IDC_GetAttr(func, _FUNCATTRMAP, attr) return BADADDR def SetFunctionAttr(ea, attr, value): """ Set a function attribute @param ea: any address belonging to the function @param attr: one of FUNCATTR_... constants @param value: new value of the attribute @return: 1-ok, 0-failed """ func = idaapi.get_func(ea) if func: _IDC_SetAttr(func, _FUNCATTRMAP, attr, value) return idaapi.update_func(func) return 0 FUNCATTR_START = 0 # function start address FUNCATTR_END = 4 # function end address FUNCATTR_FLAGS = 8 # function flags FUNCATTR_FRAME = 10 # function frame id FUNCATTR_FRSIZE = 14 # size of local variables FUNCATTR_FRREGS = 18 # size of saved registers area FUNCATTR_ARGSIZE = 20 # number of bytes purged from the stack FUNCATTR_FPD = 24 # frame pointer delta FUNCATTR_COLOR = 28 # function color code FUNCATTR_OWNER = 10 # chunk owner (valid only for tail chunks) FUNCATTR_REFQTY = 14 # number of chunk parents (valid only for tail chunks) # Redefining the constants for 64-bit if __EA64__: FUNCATTR_START = 0 FUNCATTR_END = 8 FUNCATTR_FLAGS = 16 FUNCATTR_FRAME = 18 FUNCATTR_FRSIZE = 26 FUNCATTR_FRREGS = 34 FUNCATTR_ARGSIZE = 36 FUNCATTR_FPD = 44 FUNCATTR_COLOR = 52 FUNCATTR_OWNER = 18 FUNCATTR_REFQTY = 26 _FUNCATTRMAP = { FUNCATTR_START : (True, 'startEA'), FUNCATTR_END : (True, 'endEA'), FUNCATTR_FLAGS : (False, 'flags'), FUNCATTR_FRAME : (True, 'frame'), FUNCATTR_FRSIZE : (True, 'frsize'), FUNCATTR_FRREGS : (True, 'frregs'), FUNCATTR_ARGSIZE : (True, 'argsize'), FUNCATTR_FPD : (False, 'fpd'), FUNCATTR_COLOR : (False, 'color'), FUNCATTR_OWNER : (True, 'owner'), FUNCATTR_REFQTY : (True, 'refqty') } def GetFunctionFlags(ea): """ Retrieve function flags @param ea: any address belonging to the function @return: -1 - function doesn't exist otherwise returns the flags """ func = idaapi.get_func(ea) if not func: return -1 else: return func.flags FUNC_NORET = idaapi.FUNC_NORET # function doesn't return FUNC_FAR = idaapi.FUNC_FAR # far function FUNC_LIB = idaapi.FUNC_LIB # library function FUNC_STATIC = idaapi.FUNC_STATIC # static function FUNC_FRAME = idaapi.FUNC_FRAME # function uses frame pointer (BP) FUNC_USERFAR = idaapi.FUNC_USERFAR # user has specified far-ness # of the function FUNC_HIDDEN = idaapi.FUNC_HIDDEN # a hidden function FUNC_THUNK = idaapi.FUNC_THUNK # thunk (jump) function FUNC_BOTTOMBP = idaapi.FUNC_BOTTOMBP # BP points to the bottom of the stack frame def SetFunctionFlags(ea, flags): """ Change function flags @param ea: any address belonging to the function @param flags: see GetFunctionFlags() for explanations @return: !=0 - ok """ func = idaapi.get_func(ea) if not func: return 0 else: func.flags = flags idaapi.update_func(func) return 1 def GetFunctionName(ea): """ Retrieve function name @param ea: any address belonging to the function @return: null string - function doesn't exist otherwise returns function name """ name = idaapi.get_func_name(ea) if not name: return "" else: return name def GetFunctionCmt(ea, repeatable): """ Retrieve function comment @param ea: any address belonging to the function @param repeatable: 1: get repeatable comment 0: get regular comment @return: function comment string """ func = idaapi.get_func(ea) if not func: return "" else: comment = idaapi.get_func_cmt(func, repeatable) if not comment: return "" else: return comment def SetFunctionCmt(ea, cmt, repeatable): """ Set function comment @param ea: any address belonging to the function @param cmt: a function comment line @param repeatable: 1: get repeatable comment 0: get regular comment """ func = idaapi.get_func(ea) if not func: return None else: return idaapi.set_func_cmt(func, cmt, repeatable) def ChooseFunction(title): """ Ask the user to select a function Arguments: @param title: title of the dialog box @return: -1 - user refused to select a function otherwise returns the selected function start address """ return idaapi.choose_func(title) def GetFuncOffset(ea): """ Convert address to 'funcname+offset' string @param ea: address to convert @return: if the address belongs to a function then return a string formed as 'name+offset' where 'name' is a function name 'offset' is offset within the function else return null string """ return idaapi.a2funcoff(ea) def FindFuncEnd(ea): """ Determine a new function boundaries @param ea: starting address of a new function @return: if a function already exists, then return its end address. If a function end cannot be determined, the return BADADDR otherwise return the end address of the new function """ func = idaapi.func_t() res = idaapi.find_func_bounds(ea, func, idaapi.FIND_FUNC_DEFINE) if res == idaapi.FIND_FUNC_UNDEF: return BADADDR else: return func.endEA def GetFrame(ea): """ Get ID of function frame structure @param ea: any address belonging to the function @return: ID of function frame or None In order to access stack variables you need to use structure member manipulaion functions with the obtained ID. """ frame = idaapi.get_frame(ea) if frame: return frame.id else: return None def GetFrameLvarSize(ea): """ Get size of local variables in function frame @param ea: any address belonging to the function @return: Size of local variables in bytes. If the function doesn't have a frame, return 0 If the function does't exist, return None """ return GetFunctionAttr(ea, FUNCATTR_FRSIZE) def GetFrameRegsSize(ea): """ Get size of saved registers in function frame @param ea: any address belonging to the function @return: Size of saved registers in bytes. If the function doesn't have a frame, return 0 This value is used as offset for BP (if FUNC_FRAME is set) If the function does't exist, return None """ return GetFunctionAttr(ea, FUNCATTR_FRREGS) def GetFrameArgsSize(ea): """ Get size of arguments in function frame which are purged upon return @param ea: any address belonging to the function @return: Size of function arguments in bytes. If the function doesn't have a frame, return 0 If the function does't exist, return -1 """ return GetFunctionAttr(ea, FUNCATTR_ARGSIZE) def GetFrameSize(ea): """ Get full size of function frame @param ea: any address belonging to the function @returns: Size of function frame in bytes. This function takes into account size of local variables + size of saved registers + size of return address + size of function arguments If the function doesn't have a frame, return size of function return address in the stack. If the function does't exist, return 0 """ func = idaapi.get_func(ea) if not func: return 0 else: return idaapi.get_frame_size(func) def MakeFrame(ea, lvsize, frregs, argsize): """ Make function frame @param ea: any address belonging to the function @param lvsize: size of function local variables @param frregs: size of saved registers @param argsize: size of function arguments @return: ID of function frame or -1 If the function did not have a frame, the frame will be created. Otherwise the frame will be modified """ func = idaapi.get_func(ea) if not func: return -1 frameid = idaapi.add_frame(func, lvsize, frregs, argsize) if not frameid: if not idaapi.set_frame_size(func, lvsize, frregs, argsize): return -1 return func.frame def GetSpd(ea): """ Get current delta for the stack pointer @param ea: end address of the instruction i.e.the last address of the instruction+1 @return: The difference between the original SP upon entering the function and SP for the specified address """ func = idaapi.get_func(ea) if not func: return None return idaapi.get_spd(func, ea) def GetSpDiff(ea): """ Get modification of SP made by the instruction @param ea: end address of the instruction i.e.the last address of the instruction+1 @return: Get modification of SP made at the specified location If the specified location doesn't contain a SP change point, return 0 Otherwise return delta of SP modification """ func = idaapi.get_func(ea) if not func: return None return idaapi.get_sp_delta(func, ea) def SetSpDiff(ea, delta): """ Setup modification of SP made by the instruction @param ea: end address of the instruction i.e.the last address of the instruction+1 @param delta: the difference made by the current instruction. @return: 1-ok, 0-failed """ return idaapi.add_user_stkpnt(ea, delta) # ---------------------------------------------------------------------------- # E N T R Y P O I N T S # ---------------------------------------------------------------------------- def GetEntryPointQty(): """ Retrieve number of entry points @returns: number of entry points """ return idaapi.get_entry_qty() def AddEntryPoint(ordinal, ea, name, makecode): """ Add entry point @param ordinal: entry point number if entry point doesn't have an ordinal number, 'ordinal' should be equal to 'ea' @param ea: address of the entry point @param name: name of the entry point. If null string, the entry point won't be renamed. @param makecode: if 1 then this entry point is a start of a function. Otherwise it denotes data bytes. @return: 0 - entry point with the specifed ordinal already exists 1 - ok """ return idaapi.add_entry(ordinal, ea, name, makecode) def GetEntryOrdinal(index): """ Retrieve entry point ordinal number @param index: 0..GetEntryPointQty()-1 @return: 0 if entry point doesn't exist otherwise entry point ordinal """ return idaapi.get_entry_ordinal(index) def GetEntryPoint(ordinal): """ Retrieve entry point address @param ordinal: entry point number it is returned by GetEntryPointOrdinal() @return: -1 if entry point doesn't exist otherwise entry point address. If entry point address is equal to its ordinal number, then the entry point has no ordinal. """ return idaapi.get_entry(ordinal) def GetEntryName(ordinal): """ Retrieve entry point name @param ordinal: entry point number, ass returned by GetEntryPointOrdinal() @return: entry point name or None """ return idaapi.get_entry_name(ordinal) def RenameEntryPoint(ordinal, name): """ Rename entry point @param ordinal: entry point number @param name: new name @return: !=0 - ok """ return idaapi.rename_entry(ordinal, name) # ---------------------------------------------------------------------------- # F I X U P S # ---------------------------------------------------------------------------- def GetNextFixupEA(ea): """ Find next address with fixup information @param ea: current address @return: -1 - no more fixups otherwise returns the next address with fixup information """ return idaapi.get_next_fixup_ea(ea) def GetPrevFixupEA(ea): """ Find previous address with fixup information @param ea: current address @return: -1 - no more fixups otherwise returns the previous address with fixup information """ return idaapi.get_prev_fixup_ea(ea) def GetFixupTgtType(ea): """ Get fixup target type @param ea: address to get information about @return: -1 - no fixup at the specified address otherwise returns fixup target type: """ fd = idaapi.get_fixup(ea) if not fd: return -1 return fd.type FIXUP_MASK = 0xF FIXUP_OFF8 = 0 # 8-bit offset. FIXUP_BYTE = FIXUP_OFF8 # 8-bit offset. FIXUP_OFF16 = 1 # 16-bit offset. FIXUP_SEG16 = 2 # 16-bit base--logical segment base (selector). FIXUP_PTR32 = 3 # 32-bit long pointer (16-bit base:16-bit # offset). FIXUP_OFF32 = 4 # 32-bit offset. FIXUP_PTR48 = 5 # 48-bit pointer (16-bit base:32-bit offset). FIXUP_HI8 = 6 # high 8 bits of 16bit offset FIXUP_HI16 = 7 # high 16 bits of 32bit offset FIXUP_LOW8 = 8 # low 8 bits of 16bit offset FIXUP_LOW16 = 9 # low 16 bits of 32bit offset FIXUP_REL = 0x10 # fixup is relative to the linear address # specified in the 3d parameter to set_fixup() FIXUP_SELFREL = 0x0 # self-relative? # - disallows the kernel to convert operands # in the first pass # - this fixup is used during output # This type of fixups is not used anymore. # Anyway you can use it for commenting purposes # in the loader modules FIXUP_EXTDEF = 0x20 # target is a location (otherwise - segment) FIXUP_UNUSED = 0x40 # fixup is ignored by IDA # - disallows the kernel to convert operands # - this fixup is not used during output FIXUP_CREATED = 0x80 # fixup was not present in the input file def GetFixupTgtSel(ea): """ Get fixup target selector @param ea: address to get information about @return: -1 - no fixup at the specified address otherwise returns fixup target selector """ fd = idaapi.get_fixup(ea) if not fd: return -1 return fd.sel def GetFixupTgtOff(ea): """ Get fixup target offset @param ea: address to get information about @return: -1 - no fixup at the specified address otherwise returns fixup target offset """ fd = idaapi.get_fixup(ea) if not fd: return -1 return fd.off def GetFixupTgtDispl(ea): """ Get fixup target displacement @param ea: address to get information about @return: -1 - no fixup at the specified address otherwise returns fixup target displacement """ fd = idaapi.get_fixup(ea) if not fd: return -1 return fd.displacement def SetFixup(ea, fixuptype, targetsel, targetoff, displ): """ Set fixup information @param ea: address to set fixup information about @param fixuptype: fixup type. see GetFixupTgtType() for possible fixup types. @param targetsel: target selector @param targetoff: target offset @param displ: displacement @return: none """ fd = idaapi.fixup_data_t() fd.type = fixuptype fd.sel = targetsel fd.off = targetoff fd.displacement = displ idaapi.set_fixup(ea, fd) def DelFixup(ea): """ Delete fixup information @param ea: address to delete fixup information about @return: None """ idaapi.del_fixup(ea) #---------------------------------------------------------------------------- # M A R K E D P O S I T I O N S #---------------------------------------------------------------------------- def MarkPosition(ea, lnnum, x, y, slot, comment): """ Mark position @param ea: address to mark @param lnnum: number of generated line for the 'ea' @param x: x coordinate of cursor @param y: y coordinate of cursor @param slot: slot number: 1..1024 if the specifed value is not within the range, IDA will ask the user to select slot. @param comment: description of the mark. Should be not empty. @return: None """ curloc = idaapi.curloc() curloc.ea = ea curloc.lnnum = lnnum curloc.x = x curloc.y = y curloc.mark(slot, comment, comment) def GetMarkedPos(slot): """ Get marked position @param slot: slot number: 1..1024 if the specifed value is <= 0 range, IDA will ask the user to select slot. @return: BADADDR - the slot doesn't contain a marked address otherwise returns the marked address """ curloc = idaapi.curloc() intp = idaapi.int_pointer() intp.assign(slot) return curloc.markedpos(intp) def GetMarkComment(slot): """ Get marked position comment @param slot: slot number: 1..1024 @return: None if the slot doesn't contain a marked address otherwise returns the marked address comment """ curloc = idaapi.curloc() return curloc.markdesc(slot) # ---------------------------------------------------------------------------- # S T R U C T U R E S # ---------------------------------------------------------------------------- def GetStrucQty(): """ Get number of defined structure types @return: number of structure types """ return idaapi.get_struc_qty() def GetFirstStrucIdx(): """ Get index of first structure type @return: -1 if no structure type is defined index of first structure type. Each structure type has an index and ID. INDEX determines position of structure definition in the list of structure definitions. Index 1 is listed first, after index 2 and so on. The index of a structure type can be changed any time, leading to movement of the structure definition in the list of structure definitions. ID uniquely denotes a structure type. A structure gets a unique ID at the creation time and this ID can't be changed. Even when the structure type gets deleted, its ID won't be resued in the future. """ return idaapi.get_first_struc_idx() def GetLastStrucIdx(): """ Get index of last structure type @return: -1 if no structure type is defined index of last structure type. See GetFirstStrucIdx() for the explanation of structure indices and IDs. """ return idaapi.get_last_struc_idx() def GetNextStrucIdx(index): """ Get index of next structure type @param index: current structure index @return: -1 if no (more) structure type is defined index of the next structure type. See GetFirstStrucIdx() for the explanation of structure indices and IDs. """ return idaapi.get_next_struc_idx(index) def GetPrevStrucIdx(index): """ Get index of previous structure type @param index: current structure index @return: -1 if no (more) structure type is defined index of the presiouvs structure type. See GetFirstStrucIdx() for the explanation of structure indices and IDs. """ return idaapi.get_prev_struc_idx(index) def GetStrucIdx(sid): """ Get structure index by structure ID @param sid: structure ID @return: -1 if bad structure ID is passed otherwise returns structure index. See GetFirstStrucIdx() for the explanation of structure indices and IDs. """ return idaapi.get_struc_idx(sid) def GetStrucId(index): """ Get structure ID by structure index @param index: structure index @return: -1 if bad structure index is passed otherwise returns structure ID. @note: See GetFirstStrucIdx() for the explanation of structure indices and IDs. """ return idaapi.get_struc_by_idx(index) def GetStrucIdByName(name): """ Get structure ID by structure name @param name: structure type name @return: -1 if bad structure type name is passed otherwise returns structure ID. """ return idaapi.get_struc_id(name) def GetStrucName(sid): """ Get structure type name @param sid: structure type ID @return: -1 if bad structure type ID is passed otherwise returns structure type name. """ return idaapi.get_struc_name(sid) def GetStrucComment(sid, repeatable): """ Get structure type comment @param sid: structure type ID @param repeatable: 1: get repeatable comment 0: get regular comment @return: None if bad structure type ID is passed otherwise returns comment. """ return idaapi.get_struc_cmt(sid, repeatable) def GetStrucSize(sid): """ Get size of a structure @param sid: structure type ID @return: -1 if bad structure type ID is passed otherwise returns size of structure in bytes. """ return idaapi.get_struc_size(sid) def GetMemberQty(sid): """ Get number of members of a structure @param sid: structure type ID @return: -1 if bad structure type ID is passed otherwise returns number of members. """ s = idaapi.get_struc(sid) if not s: return -1 return s.memqty def GetStrucPrevOff(sid, offset): """ Get previous offset in a structure @param sid: structure type ID @param offset: current offset @return: -1 if bad structure type ID is passed or no (more) offsets in the structure otherwise returns previous offset in a structure. @note: IDA allows 'holes' between members of a structure. It treats these 'holes' as unnamed arrays of bytes. This function returns a member offset or a hole offset. It will return size of the structure if input 'offset' is bigger than the structure size. """ s = idaapi.get_struc(sid) if not s: return -1 return idaapi.get_struc_prev_offset(s, offset) def GetStrucNextOff(sid, offset): """ Get next offset in a structure @param sid: structure type ID @param offset: current offset @return: -1 if bad structure type ID is passed or no (more) offsets in the structure otherwise returns next offset in a structure. @note: IDA allows 'holes' between members of a structure. It treats these 'holes' as unnamed arrays of bytes. This function returns a member offset or a hole offset. It will return size of the structure if input 'offset' belongs to the last member of the structure. """ s = idaapi.get_struc(sid) if not s: return -1 return idaapi.get_struc_next_offset(s, offset) def GetFirstMember(sid): """ Get offset of the first member of a structure @param sid: structure type ID @return: -1 if bad structure type ID is passed or structure has no members otherwise returns offset of the first member. @note: IDA allows 'holes' between members of a structure. It treats these 'holes' as unnamed arrays of bytes. """ s = idaapi.get_struc(sid) if not s: return -1 return idaapi.get_struc_first_offset(s) def GetLastMember(sid): """ Get offset of the last member of a structure @param sid: structure type ID @return: -1 if bad structure type ID is passed or structure has no members otherwise returns offset of the last member. @note: IDA allows 'holes' between members of a structure. It treats these 'holes' as unnamed arrays of bytes. """ s = idaapi.get_struc(sid) if not s: return -1 return idaapi.get_struc_last_offset(s) def GetMemberOffset(sid, member_name): """ Get offset of a member of a structure by the member name @param sid: structure type ID @param member_name: name of structure member @return: -1 if bad structure type ID is passed or no such member in the structure otherwise returns offset of the specified member. """ s = idaapi.get_struc(sid) if not s: return -1 m = idaapi.get_member_by_name(s, member_name) if not m: return -1 return m.get_soff() def GetMemberName(sid, member_offset): """ Get name of a member of a structure @param sid: structure type ID @param member_offset: member offset. The offset can be any offset in the member. For example, is a member is 4 bytes long and starts at offset 2, then 2,3,4,5 denote the same structure member. @return: None if bad structure type ID is passed or no such member in the structure otherwise returns name of the specified member. """ s = idaapi.get_struc(sid) if not s: return None m = idaapi.get_member(s, member_offset) if not m: return None return idaapi.get_member_name(m.id) def GetMemberComment(sid, member_offset, repeatable): """ Get comment of a member @param sid: structure type ID @param member_offset: member offset. The offset can be any offset in the member. For example, is a member is 4 bytes long and starts at offset 2, then 2,3,4,5 denote the same structure member. @param repeatable: 1: get repeatable comment 0: get regular comment @return: None if bad structure type ID is passed or no such member in the structure otherwise returns comment of the specified member. """ s = idaapi.get_struc(sid) if not s: return None m = idaapi.get_member(s, member_offset) if not m: return None return idaapi.get_member_cmt(m.id, repeatable) def GetMemberSize(sid, member_offset): """ Get size of a member @param sid: structure type ID @param member_offset: member offset. The offset can be any offset in the member. For example, is a member is 4 bytes long and starts at offset 2, then 2,3,4,5 denote the same structure member. @return: -1 if bad structure type ID is passed or no such member in the structure otherwise returns size of the specified member in bytes. """ s = idaapi.get_struc(sid) if not s: return None m = idaapi.get_member(s, member_offset) if not m: return None return idaapi.get_member_size(m) def GetMemberFlag(sid, member_offset): """ Get type of a member @param sid: structure type ID @param member_offset: member offset. The offset can be any offset in the member. For example, is a member is 4 bytes long and starts at offset 2, then 2,3,4,5 denote the same structure member. @return: -1 if bad structure type ID is passed or no such member in the structure otherwise returns type of the member, see bit definitions above. If the member type is a structure then function GetMemberStrid() should be used to get the structure type id. """ s = idaapi.get_struc(sid) if not s: return -1 m = idaapi.get_member(s, member_offset) if not m: return -1 return m.flag def GetMemberStrId(sid, member_offset): """ Get structure id of a member @param sid: structure type ID @param member_offset: member offset. The offset can be any offset in the member. For example, is a member is 4 bytes long and starts at offset 2, then 2,3,4,5 denote the same structure member. @return: -1 if bad structure type ID is passed or no such member in the structure otherwise returns structure id of the member. If the current member is not a structure, returns -1. """ s = idaapi.get_struc(sid) if not s: return -1 m = idaapi.get_member(s, member_offset) if not m: return -1 cs = idaapi.get_sptr(m) if cs: return cs.id else: return -1 def IsUnion(sid): """ Is a structure a union? @param sid: structure type ID @return: 1: yes, this is a union id 0: no @note: Unions are a special kind of structures """ s = idaapi.get_struc(sid) if not s: return 0 return s.is_union() def AddStrucEx(index, name, is_union): """ Define a new structure type @param index: index of new structure type If another structure has the specified index, then index of that structure and all other structures will be incremented, freeing the specifed index. If index is == -1, then the biggest index number will be used. See GetFirstStrucIdx() for the explanation of structure indices and IDs. @param name: name of the new structure type. @param is_union: 0: structure 1: union @return: -1 if can't define structure type because of bad structure name: the name is ill-formed or is already used in the program. otherwise returns ID of the new structure type """ if index == -1: index = BADADDR return idaapi.add_struc(index, name, is_union) def DelStruc(sid): """ Delete a structure type @param sid: structure type ID @return: 0 if bad structure type ID is passed 1 otherwise the structure type is deleted. All data and other structure types referencing to the deleted structure type will be displayed as array of bytes. """ s = idaapi.get_struc(sid) if not s: return 0 return idaapi.del_struc(s) def SetStrucIdx(sid, index): """ Change structure index @param sid: structure type ID @param index: new index of the structure @return: != 0 - ok @note: See GetFirstStrucIdx() for the explanation of structure indices and IDs. """ s = idaapi.get_struc(sid) if not s: return 0 return idaapi.set_struc_idx(s, index) def SetStrucName(sid, name): """ Change structure name @param sid: structure type ID @param name: new name of the structure @return: != 0 - ok """ return idaapi.set_struc_name(sid, name) def SetStrucComment(sid, comment, repeatable): """ Change structure comment @param sid: structure type ID @param comment: new comment of the structure @param repeatable: 1: change repeatable comment 0: change regular comment @return: != 0 - ok """ return idaapi.set_struc_cmt(sid, comment, repeatable) def AddStrucMember(sid, name, offset, flag, typeid, nbytes, target=-1, tdelta=0, reftype=REF_OFF32): """ Add structure member @param sid: structure type ID @param name: name of the new member @param offset: offset of the new member -1 means to add at the end of the structure @param flag: type of the new member. Should be one of FF_BYTE..FF_PACKREAL (see above) combined with FF_DATA @param typeid: if isStruc(flag) then typeid specifies the structure id for the member if isOff0(flag) then typeid specifies the offset base. if isASCII(flag) then typeid specifies the string type (ASCSTR_...). if isStroff(flag) then typeid specifies the structure id Otherwise should be -1. @param nbytes: number of bytes in the new member @param target: target address of the offset expr. You may specify it as -1, ida will calculate it itself @param tdelta: offset target delta. usually 0 @param reftype: see REF_... definitions @note: The remaining arguments are allowed only if isOff0(flag) and you want to specify a complex offset expression @return: 0 - ok, otherwise error code (one of STRUC_ERROR_*) """ if isOff0(flag): return Eval('AddStrucMember(%d, "%s", %d, %d, %d, %d, %d, %d, %d);' % (sid, name, offset, flag, typeid, nbytes, target, tdelta, reftype)) else: return Eval('AddStrucMember(%d, "%s", %d, %d, %d, %d);' % (sid, name, offset, flag, typeid, nbytes)) STRUC_ERROR_MEMBER_NAME = -1 # already has member with this name (bad name) STRUC_ERROR_MEMBER_OFFSET = -2 # already has member at this offset STRUC_ERROR_MEMBER_SIZE = -3 # bad number of bytes or bad sizeof(type) STRUC_ERROR_MEMBER_TINFO = -4 # bad typeid parameter STRUC_ERROR_MEMBER_STRUCT = -5 # bad struct id (the 1st argument) STRUC_ERROR_MEMBER_UNIVAR = -6 # unions can't have variable sized members STRUC_ERROR_MEMBER_VARLAST = -7 # variable sized member should be the last member in the structure def DelStrucMember(sid, member_offset): """ Delete structure member @param sid: structure type ID @param member_offset: offset of the member @return: != 0 - ok. @note: IDA allows 'holes' between members of a structure. It treats these 'holes' as unnamed arrays of bytes. """ s = idaapi.get_struc(sid) if not s: return 0 return idaapi.del_struc_member(s, member_offset) def SetMemberName(sid, member_offset, name): """ Change structure member name @param sid: structure type ID @param member_offset: offset of the member @param name: new name of the member @return: != 0 - ok. """ s = idaapi.get_struc(sid) if not s: return 0 return idaapi.set_member_name(s, member_offset, name) def SetMemberType(sid, member_offset, flag, typeid, nitems, target=-1, tdelta=0, reftype=REF_OFF32): """ Change structure member type @param sid: structure type ID @param member_offset: offset of the member @param flag: new type of the member. Should be one of FF_BYTE..FF_PACKREAL (see above) combined with FF_DATA @param typeid: structure id if 'flag' == FF_STRU Denotes type of the member is the member itself is a structure. Otherwise should be -1. if isOff0(flag) then typeid specifies the offset base. if isASCII(flag) then typeid specifies the string type (ASCSTR_...). @param nitems: number of items in the member @param target: target address of the offset expr. You may specify it as -1, ida will calculate it itself @param tdelta: offset target delta. usually 0 @param reftype: see REF_... definitions @note: The remaining arguments are allowed only if isOff0(flag) and you want to specify a complex offset expression @return: !=0 - ok. """ if isOff0(flag): return Eval('SetMemberType(%d, %d, %d, %d, %d, %d, %d, %d);' % (sid, member_offset, flag, typeid, nitems, target, tdelta, reftype)) else: return Eval('SetMemberType(%d, %d, %d, %d, %d);' % (sid, member_offset, flag, typeid, nitems)) def SetMemberComment(sid, member_offset, comment, repeatable): """ Change structure member comment @param sid: structure type ID @param member_offset: offset of the member @param comment: new comment of the structure member @param repeatable: 1: change repeatable comment 0: change regular comment @return: != 0 - ok """ s = idaapi.get_struc(sid) if not s: return 0 m = idaapi.get_member(s, member_offset) if not m: return 0 return idaapi.set_member_cmt(m, comment, repeatable) def GetFchunkAttr(ea, attr): """ Get a function chunk attribute @param ea: any address in the chunk @param attr: one of: FUNCATTR_START, FUNCATTR_END, FUNCATTR_OWNER, FUNCATTR_REFQTY @return: desired attribute or -1 """ return Eval("GetFchunkAttr(0x%x, %d);" % (ea, attr)) def SetFchunkAttr(ea, attr, value): """ Set a function chunk attribute @param ea: any address in the chunk @param attr: only FUNCATTR_START, FUNCATTR_END, FUNCATTR_OWNER @param value: desired value @return: 0 if failed, 1 if success """ if attr in [ FUNCATTR_START, FUNCATTR_END, FUNCATTR_OWNER ]: chunk = idaapi.get_fchunk(ea) if chunk: _IDC_SetAttr(chunk, _FUNCATTRMAP, attr, value) return idaapi.update_func(chunk) return 0 def GetFchunkReferer(ea, idx): """ Get a function chunk referer @param ea: any address in the chunk @param idx: referer index (0..GetFchunkAttr(FUNCATTR_REFQTY)) @return: referer address or BADADDR """ return idaapi.get_fchunk_referer(ea, idx) def NextFchunk(ea): """ Get next function chunk @param ea: any address @return: the starting address of the next function chunk or BADADDR @note: This function enumerates all chunks of all functions in the database """ func = idaapi.get_next_fchunk(ea) if func: return func.startEA else: return BADADDR def PrevFchunk(ea): """ Get previous function chunk @param ea: any address @return: the starting address of the function chunk or BADADDR @note: This function enumerates all chunks of all functions in the database """ func = idaapi.get_prev_fchunk(ea) if func: return func.startEA else: return BADADDR def AppendFchunk(funcea, ea1, ea2): """ Append a function chunk to the function @param funcea: any address in the function @param ea1: start of function tail @param ea2: end of function tail @return: 0 if failed, 1 if success @note: If a chunk exists at the specified addresses, it must have exactly the specified boundaries """ func = idaapi.get_func(funcea) if not func: return 0 else: return idaapi.append_func_tail(func, ea1, ea2) def RemoveFchunk(funcea, tailea): """ Remove a function chunk from the function @param funcea: any address in the function @param tailea: any address in the function chunk to remove @return: 0 if failed, 1 if success """ func = idaapi.get_func(funcea) if not func: return 0 else: return idaapi.remove_func_tail(func, tailea) def SetFchunkOwner(tailea, funcea): """ Change the function chunk owner @param tailea: any address in the function chunk @param funcea: the starting address of the new owner @return: 0 if failed, 1 if success @note: The new owner must already have the chunk appended before the call """ tail = idaapi.get_func(tailea) if not tail: return 0 else: return idaapi.set_tail_owner(tail, funcea) def FirstFuncFchunk(funcea): """ Get the first function chunk of the specified function @param funcea: any address in the function @return: the function entry point or BADADDR @note: This function returns the first (main) chunk of the specified function """ func = idaapi.get_func(funcea) fci = idaapi.func_tail_iterator_t(func, funcea) if fci.main(): return fci.chunk().startEA else: return BADADDR def NextFuncFchunk(funcea, tailea): """ Get the next function chunk of the specified function @param funcea: any address in the function @param tailea: any address in the current chunk @return: the starting address of the next function chunk or BADADDR @note: This function returns the next chunk of the specified function """ func = idaapi.get_func(funcea) fci = idaapi.func_tail_iterator_t(func, funcea) if not fci.main(): return BADADDR # Iterate and try to find the current chunk found = False while True: if fci.chunk().startEA <= tailea and \ fci.chunk().endEA > tailea: found = True break if not fci.next(): break # Return the next chunk, if there is one if found and fci.next(): return fci.chunk().startEA else: return BADADDR # ---------------------------------------------------------------------------- # E N U M S # ---------------------------------------------------------------------------- def GetEnumQty(): """ Get number of enum types @return: number of enumerations """ return idaapi.get_enum_qty() def GetnEnum(idx): """ Get ID of the specified enum by its serial number @param idx: number of enum (0..GetEnumQty()-1) @return: ID of enum or -1 if error """ return idaapi.getn_enum(idx) def GetEnumIdx(enum_id): """ Get serial number of enum by its ID @param enum_id: ID of enum @return: (0..GetEnumQty()-1) or -1 if error """ return idaapi.get_enum_idx(enum_id) def GetEnum(name): """ Get enum ID by the name of enum Arguments: name - name of enum returns: ID of enum or -1 if no such enum exists """ return idaapi.get_enum(name) def GetEnumName(enum_id): """ Get name of enum @param enum_id: ID of enum @return: name of enum or empty string """ return idaapi.get_enum_name(enum_id) def GetEnumCmt(enum_id, repeatable): """ Get comment of enum @param enum_id: ID of enum @param repeatable: 0:get regular comment 1:get repeatable comment @return: comment of enum """ return idaapi.get_enum_cmt(enum_id, repeatable) def GetEnumSize(enum_id): """ Get size of enum @param enum_id: ID of enum @return: number of constants in the enum Returns 0 if enum_id is bad. """ return idaapi.get_enum_size(enum_id) def GetEnumWidth(enum_id): """ Get width of enum elements @param enum_id: ID of enum @return: log2(size of enum elements in bytes)+1 possible returned values are 1..7 1-1byte,2-2bytes,3-4bytes,4-8bytes,etc Returns 0 if enum_id is bad or the width is unknown. """ return idaapi.get_enum_width(enum_id) def GetEnumFlag(enum_id): """ Get flag of enum @param enum_id: ID of enum @return: flags of enum. These flags determine representation of numeric constants (binary,octal,decimal,hex) in the enum definition. See start of this file for more information about flags. Returns 0 if enum_id is bad. """ return idaapi.get_enum_flag(enum_id) def GetConstByName(name): """ Get member of enum - a symbolic constant ID @param name: name of symbolic constant @return: ID of constant or -1 """ return idaapi.get_const_by_name(name) def GetConstValue(const_id): """ Get value of symbolic constant @param const_id: id of symbolic constant @return: value of constant or 0 """ return idaapi.get_const_value(const_id) def GetConstBmask(const_id): """ Get bit mask of symbolic constant @param const_id: id of symbolic constant @return: bitmask of constant or 0 ordinary enums have bitmask = -1 """ return idaapi.get_const_bmask(const_id) def GetConstEnum(const_id): """ Get id of enum by id of constant @param const_id: id of symbolic constant @return: id of enum the constant belongs to. -1 if const_id is bad. """ return idaapi.get_const_enum(const_id) def GetConstEx(enum_id, value, serial, bmask): """ Get id of constant @param enum_id: id of enum @param value: value of constant @param serial: serial number of the constant in the enumeration. See OpEnumEx() for details. @param bmask: bitmask of the constant ordinary enums accept only -1 as a bitmask @return: id of constant or -1 if error """ return idaapi.get_const(enum_id, value, serial, bmask) def GetFirstBmask(enum_id): """ Get first bitmask in the enum (bitfield) @param enum_id: id of enum (bitfield) @return: the smallest bitmask of constant or -1 no bitmasks are defined yet All bitmasks are sorted by their values as unsigned longs. """ return idaapi.get_first_bmask(enum_id) def GetLastBmask(enum_id): """ Get last bitmask in the enum (bitfield) @param enum_id: id of enum @return: the biggest bitmask or -1 no bitmasks are defined yet All bitmasks are sorted by their values as unsigned longs. """ return idaapi.get_last_bmask(enum_id) def GetNextBmask(enum_id, value): """ Get next bitmask in the enum (bitfield) @param enum_id: id of enum @param value: value of the current bitmask @return: value of a bitmask with value higher than the specified value. -1 if no such bitmasks exist. All bitmasks are sorted by their values as unsigned longs. """ return idaapi.get_next_bmask(enum_id, value) def GetPrevBmask(enum_id, value): """ Get prev bitmask in the enum (bitfield) @param enum_id: id of enum @param value: value of the current bitmask @return: value of a bitmask with value lower than the specified value. -1 no such bitmasks exist. All bitmasks are sorted by their values as unsigned longs. """ return idaapi.get_prev_bmask(enum_id, value) def GetBmaskName(enum_id, bmask): """ Get bitmask name (only for bitfields) @param enum_id: id of enum @param bmask: bitmask of the constant @return: name of bitmask or None """ return idaapi.get_bmask_name(enum_id, bmask) def GetBmaskCmt(enum_id, bmask, repeatable): """ Get bitmask comment (only for bitfields) @param enum_id: id of enum @param bmask: bitmask of the constant @param repeatable: type of comment, 0-regular, 1-repeatable @return: comment attached to bitmask or None """ return idaapi.get_bmask_cmt(enum_id, bmask, repeatable) def SetBmaskName(enum_id, bmask, name): """ Set bitmask name (only for bitfields) @param enum_id: id of enum @param bmask: bitmask of the constant @param name: name of bitmask @return: 1-ok, 0-failed """ return idaapi.set_bmask_name(enum_id, bmask, name) def SetBmaskCmt(enum_id, bmask, cmt, repeatable): """ Set bitmask comment (only for bitfields) @param enum_id: id of enum @param bmask: bitmask of the constant @param cmt: comment repeatable - type of comment, 0-regular, 1-repeatable @return: 1-ok, 0-failed """ return idaapi.set_bmask_cmt(enum_id, bmask, cmt, repeatable) def GetFirstConst(enum_id, bmask): """ Get first constant in the enum @param enum_id: id of enum @param bmask: bitmask of the constant (ordinary enums accept only -1 as a bitmask) @return: value of constant or -1 no constants are defined All constants are sorted by their values as unsigned longs. """ return idaapi.get_first_const(enum_id, bmask) def GetLastConst(enum_id, bmask): """ Get last constant in the enum @param enum_id: id of enum @param bmask: bitmask of the constant (ordinary enums accept only -1 as a bitmask) @return: value of constant or -1 no constants are defined All constants are sorted by their values as unsigned longs. """ return idaapi.get_last_const(enum_id, bmask) def GetNextConst(enum_id, value, bmask): """ Get next constant in the enum @param enum_id: id of enum @param bmask: bitmask of the constant ordinary enums accept only -1 as a bitmask @param value: value of the current constant @return: value of a constant with value higher than the specified value. -1 no such constants exist. All constants are sorted by their values as unsigned longs. """ return idaapi.get_next_const(enum_id, value, bmask) def GetPrevConst(enum_id, value, bmask): """ Get prev constant in the enum @param enum_id: id of enum @param bmask : bitmask of the constant ordinary enums accept only -1 as a bitmask @param value: value of the current constant @return: value of a constant with value lower than the specified value. -1 no such constants exist. All constants are sorted by their values as unsigned longs. """ return idaapi.get_prev_const(enum_id, value, bmask) def GetConstName(const_id): """ Get name of a constant @param const_id: id of const Returns: name of constant """ name = idaapi.get_const_name(const_id) if not name: return "" else: return name def GetConstCmt(const_id, repeatable): """ Get comment of a constant @param const_id: id of const @param repeatable: 0:get regular comment, 1:get repeatable comment @return: comment string """ cmt = idaapi.get_const_cmt(const_id, repeatable) if not cmt: return "" else: return cmt def AddEnum(idx, name, flag): """ Add a new enum type @param idx: serial number of the new enum. If another enum with the same serial number exists, then all enums with serial numbers >= the specified idx get their serial numbers incremented (in other words, the new enum is put in the middle of the list of enums). If idx >= GetEnumQty() or idx == -1 then the new enum is created at the end of the list of enums. @param name: name of the enum. @param flag: flags for representation of numeric constants in the definition of enum. @return: id of new enum or -1. """ return idaapi.add_enum(idx, name, flag) def DelEnum(enum_id): """ Delete enum type @param enum_id: id of enum @return: None """ idaapi.del_enum(enum_id) def SetEnumIdx(enum_id, idx): """ Give another serial number to a enum @param enum_id: id of enum @param idx: new serial number. If another enum with the same serial number exists, then all enums with serial numbers >= the specified idx get their serial numbers incremented (in other words, the new enum is put in the middle of the list of enums). If idx >= GetEnumQty() then the enum is moved to the end of the list of enums. @return: comment string """ return idaapi.set_enum_idx(enum_id, idx) def SetEnumName(enum_id, name): """ Rename enum @param enum_id: id of enum @param name: new name of enum @return: 1-ok,0-failed """ return idaapi.set_enum_name(enum_id, name) def SetEnumCmt(enum_id, cmt, repeatable): """ Set comment of enum @param enum_id: id of enum @param cmt: new comment for the enum @param repeatable: is the comment repeatable? - 0:set regular comment - 1:set repeatable comment @return: 1-ok,0-failed """ return idaapi.set_enum_cmt(enum_id, cmt, repeatable) def SetEnumFlag(enum_id, flag): """ Set flag of enum @param enum_id: id of enum @param flag: flags for representation of numeric constants in the definition of enum. @return: 1-ok,0-failed """ return idaapi.set_enum_flag(enum_id, flag) def SetEnumBf(enum_id, flag): """ Set bitfield property of enum @param enum_id: id of enum @param flag: flags - 1: convert to bitfield - 0: convert to ordinary enum @return: 1-ok,0-failed """ return idaapi.set_enum_bf(enum_id, flag) def SetEnumWidth(enum_id, width): """ Set width of enum elements @param enum_id: id of enum @param width: element width in bytes allowed values: 0-unknown or 1..7: (log2 of the element size)+1 @return: 1-ok, 0-failed """ return idaapi.set_enum_width(enum_id, width) def IsBitfield(enum_id): """ Is enum a bitfield? @param enum_id: id of enum @return: 1-yes, 0-no, ordinary enum """ return idaapi.is_bf(enum_id) def AddConstEx(enum_id, name, value, bmask): """ Add a member of enum - a symbolic constant @param enum_id: id of enum @param name: name of symbolic constant. Must be unique in the program. @param value: value of symbolic constant. @param bmask: bitmask of the constant ordinary enums accept only -1 as a bitmask all bits set in value should be set in bmask too @return: 0-ok, otherwise error code (one of CONST_ERROR_*) """ return idaapi.add_const(enum_id, name, value, bmask) CONST_ERROR_NAME = idaapi.CONST_ERROR_NAME # already have member with this name (bad name) CONST_ERROR_VALUE = idaapi.CONST_ERROR_VALUE # already have member with this value CONST_ERROR_ENUM = idaapi.CONST_ERROR_ENUM # bad enum id CONST_ERROR_MASK = idaapi.CONST_ERROR_MASK # bad bmask CONST_ERROR_ILLV = idaapi.CONST_ERROR_ILLV # bad bmask and value combination (~bmask & value != 0) def DelConstEx(enum_id, value, serial, bmask): """ Delete a member of enum - a symbolic constant @param enum_id: id of enum @param value: value of symbolic constant. @param serial: serial number of the constant in the enumeration. See OpEnumEx() for for details. @param bmask: bitmask of the constant ordinary enums accept only -1 as a bitmask @return: 1-ok, 0-failed """ return idaapi.del_const(enum_id, value, serial, bmask) def SetConstName(const_id, name): """ Rename a member of enum - a symbolic constant @param const_id: id of const @param name: new name of constant @return: 1-ok, 0-failed """ return idaapi.set_const_name(const_id, name) def SetConstCmt(const_id, cmt, repeatable): """ Set a comment of a symbolic constant @param const_id: id of const @param cmt: new comment for the constant @param repeatable: is the comment repeatable? 0: set regular comment 1: set repeatable comment @return: 1-ok, 0-failed """ return idaapi.set_const_cmt(const_id, cmt, repeatable) #---------------------------------------------------------------------------- # A R R A Y S I N I D C #---------------------------------------------------------------------------- def CreateArray(name): raise DeprecatedIDCError, "Use python pickles instead." def GetArrayId(name): raise DeprecatedIDCError, "Use python pickles instead." def RenameArray(hashid, newname): raise DeprecatedIDCError, "Use python pickles instead." def DeleteArray(hashid): raise DeprecatedIDCError, "Use python pickles instead." def SetArrayLong(hashid, idx, value): raise DeprecatedIDCError, "Use python pickles instead." def SetArrayString(hashid, idx, s): raise DeprecatedIDCError, "Use python pickles instead." def GetArrayElement(tag, hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def DelArrayElement(tag, hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def GetFirstIndex(tag, hashid): raise DeprecatedIDCError, "Use python pickles instead." def GetLastIndex(tag, hashid): raise DeprecatedIDCError, "Use python pickles instead." def GetNextIndex(tag, hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def GetPrevIndex(tag, hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def SetHashLong(hashid, idx, value): raise DeprecatedIDCError, "Use python pickles instead." def SetHashString(hashid, idx, value): raise DeprecatedIDCError, "Use python pickles instead." def GetHashLong(hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def GetHashString(hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def DelHashElement(hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def GetFirstHashKey(hashid): raise DeprecatedIDCError, "Use python pickles instead." def GetNextHashKey(hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." def GetLastHashKey(hashid): raise DeprecatedIDCError, "Use python pickles instead." def GetPrevHashKey(hashid, idx): raise DeprecatedIDCError, "Use python pickles instead." #---------------------------------------------------------------------------- # S O U R C E F I L E / L I N E N U M B E R S #---------------------------------------------------------------------------- def AddSourceFile(ea1, ea2, filename): """ Mark a range of address as belonging to a source file An address range may belong only to one source file. A source file may be represented by several address ranges. @param ea1: linear address of start of the address range @param ea2: linear address of end of the address range @param filename: name of source file. @return: 1-ok, 0-failed. @note: IDA can keep information about source files used to create the program. Each source file is represented by a range of addresses. A source file may contains several address ranges. """ return idaapi.add_sourcefile(ea1, ea2, filename) def GetSourceFile(ea): """ Get name of source file occupying the given address @param ea: linear address @return: NULL - source file information is not found otherwise returns pointer to file name """ return idaapi.get_sourcefile(ea) def DelSourceFile(ea): """ Delete information about the source file @param ea: linear address belonging to the source file @return: NULL - source file information is not found otherwise returns pointer to file name """ return idaapi.del_sourcefile(ea) def SetLineNumber(ea, lnnum): """ Set source line number @param ea: linear address @param lnnum: number of line in the source file @return: None """ idaapi.set_source_linnum(ea, lnnum) def GetLineNumber(ea): """ Get source line number @param ea: linear address @return: number of line in the source file or -1 """ return idaapi.get_source_linnum(ea) def DelLineNumber(ea): """ Delete information about source line number @param ea: linear address @return: None """ idaapi.del_source_linnum(ea) #---------------------------------------------------------------------------- # T Y P E L I B R A R I E S #---------------------------------------------------------------------------- def LoadTil(name, tildir=None): """ Load a type library @param name: name of type library. @param tildir: drectory to load the TIL from (defaults to "til/pc") @return: 1-ok, 0-failed. """ if not tildir: tildir = "til" + os.sep + "pc" til = idaapi.load_til(tildir, name) if til: return 1 else: return 0 def Til2Idb(idx, type_name): """ Copy information from type library to database Copy structure, union, or enum definition from the type library to the IDA database. @param idx: the position of the new type in the list of types (structures or enums) -1 means at the end of the list @param type_name: name of type to copy @return: BADNODE-failed, otherwise the type id (structure id or enum id) """ return idaapi.til2idb(idx, type_name) def GetType(ea): """ Get type of function/variable @param ea: the address of the object @return: type string or None if failed """ return idaapi.idc_get_type(ea) def SizeOf(typestr): """ Returns the size of the type. It is equivalent to IDC's sizeof(). Use name, tp, fld = idc.ParseType() ; Sizeof(fld) to retrieve the size @return: -1 if typestring is not valid otherwise the size of the type """ return idaapi.get_type_size0(idaapi.cvar.idati, typestr) def GuessType(ea): """ Guess type of function/variable @param ea: the address of the object, can be the structure member id too @return: type string or None if failed """ return idaapi.idc_guess_type(ea) def SetType(ea, newtype): """ Set type of function/variable @param ea: the address of the object @param newtype: the type string in C declaration form. Must contain the closing ';' if specified as an empty string, then the assciated with 'ea' will be deleted @return: 1-ok, 0-failed. """ return idaapi.apply_cdecl(ea, newtype) def ParseType(inputtype, flags): """ Parse type declaration @param inputtype: file name or C declarations (depending on the flags) @param flags: combination of PT_... constants or 0 @return: None on failure or (name, type, fields) tuple """ return idaapi.idc_parse_decl(idaapi.cvar.idati, inputtype, flags) def ParseTypes(inputtype, flags): """ Parse type declarations @param inputtype: file name or C declarations (depending on the flags) @param flags: combination of PT_... constants or 0 @return: number of errors """ return idaapi.idc_parse_types(inputtype, flags) PT_FILE = 0x0001 # input if a file name (otherwise contains type declarations) PT_SILENT = 0x0002 # silent mode PT_PAKDEF = 0x0000 # default pack value PT_PAK1 = 0x0010 # #pragma pack(1) PT_PAK2 = 0x0020 # #pragma pack(2) PT_PAK4 = 0x0030 # #pragma pack(4) PT_PAK8 = 0x0040 # #pragma pack(8) PT_PAK16 = 0x0050 # #pragma pack(16) def GetMaxLocalType(): """ Get number of local types + 1 @return: value >= 1. 1 means that there are no local types. """ return idaapi.get_ordinal_qty(idaapi.cvar.idati) def SetLocalType(ordinal, input, flags): """ Parse one type declaration and store it in the specified slot @param ordinal: slot number (1...NumberOfLocalTypes) -1 means allocate new slot or reuse the slot of the existing named type @param input: C declaration. Empty input empties the slot @param flags: combination of PT_... constants or 0 @return: slot number or 0 if error """ return idaapi.idc_set_local_type(ordinal, input, flags) def GetLocalType(ordinal, flags): """ Retrieve a local type declaration @param ordinal: slot number (1...NumberOfLocalTypes) @param flags: any of PRTYPE_* constants @return: local type as a C declaration or "" @note: This function can return types strings up to 64KiB. Use idaapi.idc_get_local_type() for larger types. """ res,str = idaapi.idc_get_local_type(ordinal, flags, 2**16) return str PRTYPE_1LINE = 0x0000 # print to one line PRTYPE_MULTI = 0x0001 # print to many lines PRTYPE_TYPE = 0x0002 # print type declaration (not variable declaration) PRTYPE_PRAGMA = 0x0004 # print pragmas for alignment def GetLocalTypeName(ordinal): """ Retrieve a local type name @param ordinal: slot number (1...NumberOfLocalTypes) returns: local type name or None """ return idaapi.idc_get_local_type_name(ordinal) # ---------------------------------------------------------------------------- # H I D D E N A R E A S # ---------------------------------------------------------------------------- def HideArea(start, end, description, header, footer, color): """ Hide an area Hidden areas - address ranges which can be replaced by their descriptions @param start: area start @param end: area end @param description: description to display if the area is collapsed @param header: header lines to display if the area is expanded @param footer: footer lines to display if the area is expanded @param color: RGB color code (-1 means default color) @returns: !=0 - ok """ return idaapi.add_hidden_area(start, end, description, header, footer, color) def SetHiddenArea(ea, visible): """ Set hidden area state @param ea: any address belonging to the hidden area @param visible: new state of the area @return: != 0 - ok """ ha = idaapi.get_hidden_area(ea) if not ha: return 0 else: ha.visible = visible return idaapi.update_hidden_area(ha) def DelHiddenArea(ea): """ Delete a hidden area @param ea: any address belonging to the hidden area @returns: != 0 - ok """ return idaapi.del_hidden_area(ea) #-------------------------------------------------------------------------- # D E B U G G E R I N T E R F A C E #-------------------------------------------------------------------------- def LoadDebugger(dbgname, use_remote): """ Load the debugger @param dbgname: debugger module name Examples: win32, linux, mac. @param use_remote: 0/1: use remote debugger or not @note: This function is needed only when running idc scripts from the command line. In other cases IDA loads the debugger module automatically. """ return idaapi.load_debugger(dbgname, use_remote) def StartDebugger(path, args, sdir): """ Launch the debugger @param path: path to the executable file. @param args: command line arguments @param sdir: initial directory for the process @return: -1-failed, 0-cancelled by the user, 1-ok @note: For all args: if empty, the default value from the database will be used See the important note to the StepInto() function """ return idaapi.start_process(path, args, sdir) def StopDebugger(): """ Stop the debugger Kills the currently debugger process and returns to the disassembly mode @return: success """ return idaapi.exit_process() def PauseProcess(): """ Suspend the running process Tries to suspend the process. If successful, the PROCESS_SUSPEND debug event will arrive (see GetDebuggerEvent) @return: success @note: To resume a suspended process use the GetDebuggerEvent function. See the important note to the StepInto() function """ return idaapi.suspend_process() def GetProcessQty(): """ Take a snapshot of running processes and return their number. """ return idaapi.get_process_qty() def GetProcessPid(idx): """ Get the process ID of a running process @param idx: number of process, is in range 0..GetProcessQty()-1 @return: 0 if failure """ pinfo = idaapi.process_info_t() pid = idaapi.get_process_info(idx, pinfo) if pid != idaapi.NO_PROCESS: return pinfo.pid else: return 0 def GetProccessName(idx): """ Get the name of a running process @param idx: number of process, is in range 0..GetProcessQty()-1 @return: None if failure """ pinfo = idaapi.process_info_t() pid = idaapi.get_process_info(idx, pinfo) if pid != idaapi.NO_PROCESS: return pinfo.name else: return "" def AttachProcess(pid, event_id): """ Attach the debugger to a running process @param pid: PID of the process to attach to. If NO_PROCESS, a dialog box will interactively ask the user for the process to attach to. @param event_id: reserved, must be -1 @return: - -2: impossible to find a compatible process - -1: impossible to attach to the given process (process died, privilege needed, not supported by the debugger plugin, ...) - 0: the user cancelled the attaching to the process - 1: the debugger properly attached to the process @note: See the important note to the StepInto() function """ return idaapi.attach_process(pid, event_id) def DetachProcess(): """ Detach the debugger from the debugged process. @return: success """ return idaapi.detach_process() def GetThreadQty(): """ Get number of threads. @return: number of threads """ return idaapi.get_thread_qty() def GetThreadId(idx): """ Get the ID of a thread @param idx: number of thread, is in range 0..GetThreadQty()-1 @return: -1 if failure """ return idaapi.getn_thread(idx) def GetCurrentThreadId(): """ Get current thread ID @return: -1 if failure """ return idaapi.get_current_thread() def SelectThread(tid): """ Select the given thread as the current debugged thread. @param tid: ID of the thread to select @return: success @note: The process must be suspended to select a new thread. """ return idaapi.select_thread(tid) def SuspendThread(tid): """ Suspend thread @param tid: thread id @return: -1:network error, 0-failed, 1-ok @note: Suspending a thread may deadlock the whole application if the suspended was owning some synchronization objects. """ return idaapi.suspend_thread(tid) def ResumeThread(tid): """ Resume thread @param tid: thread id @return: -1:network error, 0-failed, 1-ok """ return idaapi.resume_thread(tid) def _get_modules(): """ INTERNAL: Enumerate process modules """ module = idaapi.module_info_t() result = idaapi.get_first_module(module) while result: yield module result = idaapi.get_next_module(module) def GetFirstModule(): """ Enumerate process modules @return: first module's base address or None on failure """ for module in _get_modules(): return module.base else: return None def GetNextModule(base): """ Enumerate process modules @param base: previous module's base address @return: next module's base address or None on failure """ foundit = False for module in _get_modules(): if foundit: return module.base if module.base == base: foundit = True else: return None def GetModuleName(base): """ Get process module name @param base: the base address of the module @return: required info or 0 """ for module in _get_modules(): if module.base == base: return module.name else: return 0 def GetModuleSize(base): """ Get process module size @param base: the base address of the module @return: required info or -1 """ for module in _get_modules(): if module.base == base: return module.size else: return -1 def StepInto(): """ Execute one instruction in the current thread. Other threads are kept suspended. @return: success @note: You must call GetDebuggerEvent() after this call in order to find out what happened. Normally you will get the STEP event but other events are possible (for example, an exception might occur or the process might exit). This remark applies to all execution control functions. The event codes depend on the issued command. """ return idaapi.step_into() def StepOver(): """ Execute one instruction in the current thread, but without entering into functions Others threads keep suspended. See the important note to the StepInto() function @return: success """ return idaapi.step_over() def RunTo(ea): """ Execute the process until the given address is reached. If no process is active, a new process is started. See the important note to the StepInto() function @return: success """ return idaapi.run_to(ea) def StepUntilRet(): """ Execute instructions in the current thread until a function return instruction is reached. Other threads are kept suspended. See the important note to the StepInto() function @return: success """ return idaapi.step_until_ret() def GetDebuggerEvent(wfne, timeout): """ Wait for the next event This function (optionally) resumes the process execution and wait for a debugger event until timeout @param wfne: combination of WFNE_... constants @param timeout: number of seconds to wait, -1-infinity @return: debugger event codes, see below """ return idaapi.wait_for_next_event(wfne, timeout) def ResumeProcess(): return GetDebuggerEvent(WFNE_CONT|WFNE_NOWAIT, 0) def SendDbgCommand(cmd): """Sends a command to the debugger module and returns the output string. An exception will be raised if the debugger is not running or the current debugger does not export the 'SendDbgCommand' IDC command. """ s = Eval('SendDbgCommand("%s");' % cmd) if s.startswith("IDC_FAILURE"): raise Exception, "Debugger command is available only when the debugger is active!" return s # wfne flag is combination of the following: WFNE_ANY = 0x0001 # return the first event (even if it doesn't suspend the process) # if the process is still running, the database # does not reflect the memory state. you might want # to call RefreshDebuggerMemory() in this case WFNE_SUSP = 0x0002 # wait until the process gets suspended WFNE_SILENT = 0x0004 # 1: be slient, 0:display modal boxes if necessary WFNE_CONT = 0x0008 # continue from the suspended state WFNE_NOWAIT = 0x0010 # do not wait for any event, immediately return DEC_TIMEOUT # (to be used with WFNE_CONT) # debugger event codes NOTASK = -2 # process does not exist DBG_ERROR = -1 # error (e.g. network problems) DBG_TIMEOUT = 0 # timeout PROCESS_START = 0x00000001 # New process started PROCESS_EXIT = 0x00000002 # Process stopped THREAD_START = 0x00000004 # New thread started THREAD_EXIT = 0x00000008 # Thread stopped BREAKPOINT = 0x00000010 # Breakpoint reached STEP = 0x00000020 # One instruction executed EXCEPTION = 0x00000040 # Exception LIBRARY_LOAD = 0x00000080 # New library loaded LIBRARY_UNLOAD = 0x00000100 # Library unloaded INFORMATION = 0x00000200 # User-defined information SYSCALL = 0x00000400 # Syscall (not used yet) WINMESSAGE = 0x00000800 # Window message (not used yet) PROCESS_ATTACH = 0x00001000 # Attached to running process PROCESS_DETACH = 0x00002000 # Detached from process PROCESS_SUSPEND = 0x00004000 # Process has been suspended def RefreshDebuggerMemory(): """ Refresh debugger memory Upon this call IDA will forget all cached information about the debugged process. This includes the segmentation information and memory contents (register cache is managed automatically). Also, this function refreshes exported name from loaded DLLs. You must call this function before using the segmentation information, memory contents, or names of a non-suspended process. This is an expensive call. """ return idaapi.refresh_debugger_memory() def TakeMemorySnapshot(only_loader_segs): """ Take memory snapshot of the debugged process @param only_loader_segs: 0-copy all segments to idb 1-copy only SFL_LOADER segments """ return idaapi.take_memory_snapshot(only_loader_segs) def GetProcessState(): """ Get debugged process state @return: one of the DBG_... constants (see below) """ return idaapi.get_process_state() DSTATE_SUSP_FOR_EVENT = -2 # process is currently suspended to react to a debug event DSTATE_SUSP = -1 # process is suspended DSTATE_NOTASK = 0 # no process is currently debugged DSTATE_RUN = 1 # process is running DSTATE_RUN_WAIT_ATTACH = 2 # process is running, waiting for process properly attached DSTATE_RUN_WAIT_END = 3 # process is running, but the user asked to kill/detach the process # remark: in this case, most events are ignored """ Get various information about the current debug event These functions are valid only when the current event exists (the process is in the suspended state) """ # For all events: def GetEventId(): """ Get ID of debug event @return: event ID """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return ev.eid def GetEventPid(): """ Get process ID for debug event @return: process ID """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return ev.pid def GetEventTid(): """ Get type ID for debug event @return: type ID """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return ev.tid def GetEventEa(): """ Get ea for debug event @return: ea """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return ev.ea def IsEventHandled(): """ Is the debug event handled? @return: boolean """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return ev.handled # For PROCESS_START, PROCESS_ATTACH, LIBRARY_LOAD events: def GetEventModuleName(): """ Get module name for debug event @return: module name """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_module_name(ev) def GetEventModuleBase(): """ Get module base for debug event @return: module base """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_module_base(ev) def GetEventModuleSize(): """ Get module size for debug event @return: module size """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_module_size(ev) def GetEventExitCode(): """ Get exit code for debug event @return: exit code for PROCESS_EXIT, THREAD_EXIT events """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return ev.exit_code def GetEventInfo(): """ Get debug event info @return: event info: for LIBRARY_UNLOAD (unloaded library name) for INFORMATION (message to display) """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_info(ev) def GetEventBptHardwareEa(): """ Get hardware address for BREAKPOINT event @return: hardware address """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_bpt_hea(ev) def GetEventExceptionCode(): """ Get exception code for EXCEPTION event @return: exception code """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_exc_code(ev) def GetEventExceptionEa(): """ Get address for EXCEPTION event @return: adress of exception """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_exc_ea(ev) def CanExceptionContinue(): """ Can it continue after EXCEPTION event? @return: boolean """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.can_exc_continue(ev) def GetEventExceptionInfo(): """ Get info for EXCEPTION event @return: info string """ ev = idaapi.get_debug_event() assert ev, "Could not retrieve debug event" return idaapi.get_event_exc_info(ev) def SetDebuggerOptions(opt): """ Get/set debugger options @param opt: combination of DOPT_... constants @return: old options """ return idaapi.set_debugger_options(opt) DOPT_SEGM_MSGS = 0x00000001 # print messages on debugger segments modifications DOPT_START_BPT = 0x00000002 # break on process start DOPT_THREAD_MSGS = 0x00000004 # print messages on thread start/exit DOPT_THREAD_BPT = 0x00000008 # break on thread start/exit DOPT_BPT_MSGS = 0x00000010 # print message on breakpoint DOPT_LIB_MSGS = 0x00000040 # print message on library load/unlad DOPT_LIB_BPT = 0x00000080 # break on library load/unlad DOPT_INFO_MSGS = 0x00000100 # print message on debugging information DOPT_INFO_BPT = 0x00000200 # break on debugging information DOPT_REAL_MEMORY = 0x00000400 # don't hide breakpoint instructions DOPT_REDO_STACK = 0x00000800 # reconstruct the stack DOPT_ENTRY_BPT = 0x00001000 # break on program entry point DOPT_EXCDLG = 0x00006000 # exception dialogs: EXCDLG_NEVER = 0x00000000 # never display exception dialogs EXCDLG_UNKNOWN = 0x00002000 # display for unknown exceptions EXCDLG_ALWAYS = 0x00006000 # always display DOPT_LOAD_DINFO = 0x00008000 # automatically load debug files (pdb) def SetRemoteDebugger(hostname, password, portnum): """ Set remote debugging options @param hostname: remote host name or address if empty, revert to local debugger @param password: password for the debugger server @param portnum: port number to connect (-1: don't change) @return: nothing """ return idaapi.set_remote_debugger(hostname, password, portnum) def GetExceptionQty(): """ Get number of defined exception codes """ return idaapi.get_exception_qty() def GetExceptionCode(idx): """ Get exception code @param idx: number of exception in the vector (0..GetExceptionQty()-1) @return: exception code (0 - error) """ return idaapi.get_exception_code(idx) def GetExceptionName(code): """ Get exception information @param code: exception code @return: "" on error """ return idaapi.get_exception_name(code) def GetExceptionFlags(code): """ Get exception information @param code: exception code @return: -1 on error """ return idaapi.get_exception_flags(code) def DefineException(code, name, desc, flags): """ Add exception handling information @param code: exception code @param name: exception name @param desc: exception description @param flags: exception flags (combination of EXC_...) @return: failure description or "" """ return idaapi.define_exception(code, name, desc, flags) EXC_BREAK = 0x0001 # break on the exception EXC_HANDLE = 0x0002 # should be handled by the debugger? def SetExceptionFlags(code, flags): """ Set exception flags @param code: exception code @param flags: exception flags (combination of EXC_...) """ return idaapi.set_exception_flags(code, flags) def ForgetException(code): """ Delete exception handling information @param code: exception code """ return idaapi.forget_exception(code) def GetRegValue(name): """ Get register value @param name: the register name @note: The debugger should be running. otherwise the function fails the register name should be valid. It is not necessary to use this function to get register values because a register name in the script will do too. @return: register value (integer or floating point) """ rv = idaapi.regval_t() res = idaapi.get_reg_val(name, rv) assert res, "get_reg_val() failed, bogus name perhaps?" return rv.ival def SetRegValue(value, name): """ Set register value @param name: the register name @param value: new register value @note: The debugger should be running It is not necessary to use this function to set register values. A register name in the left side of an assignment will do too. """ rv = idaapi.regval_t() if type(value)==types.StringType: value = int(value) elif type(value)!=types.IntType: print "SetRegValue: value must be integer!" return BADADDR if value<0: #ival_set cannot handle negative numbers value &= 0xFFFFFFFF rv.ival = value return idaapi.set_reg_val(name, rv) def GetBptQty(): """ Get number of breakpoints. @return: number of breakpoints """ return idaapi.get_bpt_qty() def GetBptEA(n): """ Get breakpoint address @param n: number of breakpoint, is in range 0..GetBptQty()-1 @return: addresss of the breakpoint or BADADDR """ bpt = idaapi.bpt_t() if idaapi.getn_bpt(n, bpt): return bpt.ea else: return BADADDR def GetBptAttr(ea, bptattr): """ Get the characteristics of a breakpoint @param ea: any address in the breakpoint range @param bptattr: the desired attribute code, one of BPTATTR_... constants @return: the desired attribute value or -1 """ bpt = idaapi.bpt_t() if not idaapi.get_bpt(ea, bpt): return -1 else: if bptattr == BPTATTR_EA: return bpt.ea if bptattr == BPTATTR_SIZE: return bpt.size if bptattr == BPTATTR_TYPE: return bpt.type if bptattr == BPTATTR_COUNT: return bpt.pass_count if bptattr == BPTATTR_FLAGS: return bpt.flags if bptattr == BPTATTR_COND: return bpt.condition return -1 BPTATTR_EA = 0 # starting address of the breakpoint BPTATTR_SIZE = 4 # size of the breakpoint (undefined for software breakpoint) BPTATTR_TYPE = 8 # type of the breakpoint BPTATTR_COUNT = 12 # number of times this breakpoint is hit before stopping BPTATTR_FLAGS = 16 # Breakpoint attributes: BPTATTR_COND = 20 # Breakpoint condition NOTE: the return value is a string in this case if __EA64__: BPTATTR_SIZE = 8 BPTATTR_TYPE = 16 BPTATTR_COUNT = 20 BPTATTR_FLAGS = 24 BPTATTR_COND = 28 # Breakpoint types: BPT_EXEC = 0 # Hardware: Execute instruction BPT_WRITE = 1 # Hardware: Write access BPT_RDWR = 3 # Hardware: Read/write access BPT_SOFT = 4 # Software breakpoint BPT_BRK = 0x01 # the debugger stops on this breakpoint BPT_TRACE = 0x02 # the debugger adds trace information when this breakpoint is reached def SetBptAttr(address, bptattr, value): """ modifiable characteristics of a breakpoint @param address: any address in the breakpoint range @param bptattr: the attribute code, one of BPTATTR_* constants BPTATTR_CND is not allowed, see SetBptCnd() @param value: the attibute value @return: success """ bpt = idaapi.bpt_t() if not idaapi.get_bpt(address, bpt): return False else: if bptattr not in [ BPTATTR_SIZE, BPTATTR_TYPE, BPTATTR_FLAGS, BPTATTR_COUNT ]: return False if bptattr == BPTATTR_SIZE: bpt.size = value if bptattr == BPTATTR_TYPE: bpt.type = value if bptattr == BPTATTR_COUNT: bpt.pass_count = value if bptattr == BPTATTR_FLAGS: bpt.flags = value idaapi.update_bpt(bpt) return True def SetBptCnd(ea, cnd): """ Set breakpoint condition @param ea: any address in the breakpoint range @param cnd: breakpoint condition @return: success """ bpt = idaapi.bpt_t() if not idaapi.get_bpt(ea, bpt): return False bpt.condition = cnd return idaapi.update_bpt(bpt) def AddBptEx(ea, size, bpttype): """ Add a new breakpoint @param ea: any address in the process memory space: @param size: size of the breakpoint (irrelevant for software breakpoints): @param bpttype: type of the breakpoint (one of BPT_... constants) @return: success @note: Only one breakpoint can exist at a given address. """ return idaapi.add_bpt(ea, size, bpttype) def AddBpt(ea): return AddBptEx(ea, 0, BPT_SOFT) def DelBpt(ea): """ Delete breakpoint @param ea: any address in the process memory space: @return: success """ return idaapi.del_bpt(ea) def EnableBpt(ea, enable): """ Enable/disable breakpoint @param ea: any address in the process memory space @return: success @note: Disabled breakpoints are not written to the process memory """ return idaapi.enable_bpt(ea, enable) def CheckBpt(ea): """ Check a breakpoint @param ea: address in the process memory space @return: one of BPTCK_... constants """ return idaapi.check_bpt(ea) BPTCK_NONE = -1 # breakpoint does not exist BPTCK_NO = 0 # breakpoint is disabled BPTCK_YES = 1 # breakpoint is enabled BPTCK_ACT = 2 # breakpoint is active (written to the process) def EnableTracing(trace_level, enable): """ Enable step tracing @param trace_level: what kind of trace to modify @param enable: 0: turn off, 1: turn on @return: success """ assert trace_level in [ TRACE_STEP, TRACE_INSN, TRACE_FUNC ], \ "trace_level must be one of TRACE_* constants" if trace_level == TRACE_STEP: return idaapi.enable_step_trace(enable) if trace_level == TRACE_INSN: return idaapi.enable_insn_trace(enable) if trace_level == TRACE_FUNC: return idaapi.enable_func_trace(enable) return False TRACE_STEP = 0x0 # lowest level trace. trace buffers are not maintained TRACE_INSN = 0x1 # instruction level trace TRACE_FUNC = 0x2 # function level trace (calls & rets) #-------------------------------------------------------------------------- # C O L O R S #-------------------------------------------------------------------------- def GetColor(ea, what): """ Get item color @param ea: address of the item @param what: type of the item (one of CIC_* constants) @return: color code in RGB (hex 0xBBGGRR) """ if what not in [ CIC_ITEM, CIC_FUNC, CIC_SEGM ]: raise ValueError, "'what' must be one of CIC_ITEM, CIC_FUNC and CIC_SEGM" if what == CIC_ITEM: return idaapi.get_item_color(ea) if what == CIC_FUNC: func = idaapi.get_func(ea) if func: return func.color else: return DEFCOLOR if what == CIC_SEGM: seg = idaapi.getseg(ea) if seg: return seg.color else: return DEFCOLOR # color item codes: CIC_ITEM = 1 # one instruction or data CIC_FUNC = 2 # function CIC_SEGM = 3 # segment DEFCOLOR = 0xFFFFFFFF # Default color def SetColor(ea, what, color): """ Set item color @param ea: address of the item @param what: type of the item (one of CIC_* constants) @param color: new color code in RGB (hex 0xBBGGRR) @return: success (True or False) """ if what not in [ CIC_ITEM, CIC_FUNC, CIC_SEGM ]: raise ValueError, "'what' must be one of CIC_ITEM, CIC_FUNC and CIC_SEGM" if what == CIC_ITEM: return idaapi.set_item_color(ea, color) if what == CIC_FUNC: func = idaapi.get_func(ea) if func: func.color = color return bool(idaapi.update_func(func)) else: return False if what == CIC_SEGM: seg = idaapi.getseg(ea) if seg: seg.color = color return bool(seg.update()) else: return False #-------------------------------------------------------------------------- # X M L #-------------------------------------------------------------------------- def SetXML(path, name, value): """ Set or update one or more XML values. @param path: XPath expression of elements where to create value(s) @param name: name of the element/attribute (use @XXX for an attribute) to create. If 'name' is empty, the elements or attributes returned by XPath are directly updated to contain the new 'value'. @param value: value of the element/attribute @return: success (True or False) """ return idaapi.set_xml(path, name, value) def GetXML(path): """ Get one XML value. @param path: XPath expression to an element or attribute whose value is requested @return: the value, None if failed """ v = idaapi.value_t() if idaapi.get_xml(path): return v.str else: return None #---------------------------------------------------------------------------- # A R M S P E C I F I C #---------------------------------------------------------------------------- def ArmForceBLJump(ea): """ Some ARM compilers in Thumb mode use BL (branch-and-link) instead of B (branch) for long jumps, since BL has more range. By default, IDA tries to determine if BL is a jump or a call. You can override IDA's decision using commands in Edit/Other menu (Force BL call/Force BL jump) or the following two functions. Force BL instruction to be a jump @param ea: address of the BL instruction @return: 1-ok, 0-failed """ return Eval("ArmForceBLJump(0x%x)"%ea) def ArmForceBLCall(ea): """ Force BL instruction to be a call @param ea: address of the BL instruction @return: 1-ok, 0-failed """ return Eval("ArmForceBLCall(0x%x)"%ea) #-------------------------------------------------------------------------- # Compatibility macros: def Compile(file): return CompileEx(file, 1) def OpOffset(ea,base): return OpOff(ea,-1,base) def OpNum(ea): return OpNumber(ea,-1) def OpChar(ea): return OpChr(ea,-1) def OpSegment(ea): return OpSeg(ea,-1) def OpDec(ea): return OpDecimal(ea,-1) def OpAlt1(ea, opstr): return OpAlt(ea, 0, opstr) def OpAlt2(ea, opstr): return OpAlt(ea, 1, opstr) def StringStp(x): return SetCharPrm(INF_ASCII_BREAK,x) def LowVoids(x): return SetLongPrm(INF_LOW_OFF,x) def HighVoids(x): return SetLongPrm(INF_HIGH_OFF,x) def TailDepth(x): return SetLongPrm(INF_MAXREF,x) def Analysis(x): return SetCharPrm(INF_AUTO,x) def Tabs(x): return SetCharPrm(INF_ENTAB,x) #def Comments(x): SetCharPrm(INF_CMTFLAG,((x) ? (SW_ALLCMT|GetCharPrm(INF_CMTFLAG)) : (~SW_ALLCMT&GetCharPrm(INF_CMTFLAG)))) def Voids(x): return SetCharPrm(INF_VOIDS,x) def XrefShow(x): return SetCharPrm(INF_XREFNUM,x) def Indent(x): return SetCharPrm(INF_INDENT,x) def CmtIndent(x): return SetCharPrm(INF_COMMENT,x) def AutoShow(x): return SetCharPrm(INF_SHOWAUTO,x) def MinEA(): return GetLongPrm(INF_MIN_EA) def MaxEA(): return GetLongPrm(INF_MAX_EA) def BeginEA(): return GetLongPrm(INF_BEGIN_EA) def set_start_cs(x): return SetLongPrm(INF_START_CS,x) def set_start_ip(x): return SetLongPrm(INF_START_IP,x) def WriteMap(filepath): return GenerateFile(OFILE_MAP, filepath, 0, BADADDR, GENFLG_MAPSEG|GENFLG_MAPNAME) def WriteTxt(filepath, ea1, ea2): return GenerateFile(OFILE_ASM, filepath, ea1, ea2, 0) def WriteExe(filepath): return GenerateFile(OFILE_EXE, filepath, 0, BADADDR, 0) def AddConst(enum_id,name,value): return AddConstEx(enum_id,name,value,-1) def AddStruc(index,name): return AddStrucEx(index,name,0) def AddUnion(index,name): return AddStrucEx(index,name,1) def OpStroff(ea,n,strid): return OpStroffEx(ea,n,strid,0) def OpEnum(ea,n,enumid): return OpEnumEx(ea,n,enumid,0) def DelConst(constid, v, mask): return DelConstEx(constid, v, 0, mask) def GetConst(constid, v, mask): return GetConstEx(constid, v, 0, mask) def AnalyseArea(sEA, eEA): return AnalyzeArea(sEA,eEA) def MakeStruct(ea,name): return MakeStructEx(ea, -1, name) def Name(ea): return NameEx(BADADDR, ea) def GetTrueName(ea): return GetTrueNameEx(BADADDR, ea) def MakeName(ea, name): return MakeNameEx(ea,name,SN_CHECK) #def GetFrame(ea): return GetFunctionAttr(ea, FUNCATTR_FRAME) #def GetFrameLvarSize(ea): return GetFunctionAttr(ea, FUNCATTR_FRSIZE) #def GetFrameRegsSize(ea): return GetFunctionAttr(ea, FUNCATTR_FRREGS) #def GetFrameArgsSize(ea): return GetFunctionAttr(ea, FUNCATTR_ARGSIZE) #def GetFunctionFlags(ea): return GetFunctionAttr(ea, FUNCATTR_FLAGS) #def SetFunctionFlags(ea, flags): return SetFunctionAttr(ea, FUNCATTR_FLAGS, flags) #def SegStart(ea): return GetSegmentAttr(ea, SEGATTR_START) #def SegEnd(ea): return GetSegmentAttr(ea, SEGATTR_END) #def SetSegmentType(ea, type): return SetSegmentAttr(ea, SEGATTR_TYPE, type) def SegCreate(a1, a2, base, use32, align, comb): return AddSeg(a1, a2, base, use32, align, comb) def SegDelete(ea, flags): return DelSeg(ea, flags) def SegBounds(ea, startea, endea, flags): return SetSegBounds(ea, startea, endea, flags) def SegRename(ea, name): return RenameSeg(ea, name) def SegClass(ea, segclass): return SetSegClass(ea, segclass) def SegAddrng(ea, bitness): return SetSegAddressing(ea, bitness) def SegDefReg(ea, reg, value): return SetSegDefReg(ea, reg, value) def Comment(ea): return GetCommentEx(ea, 0) def RptCmt(ea): return GetCommentEx(ea, 1) def SetReg(ea, reg, value): return SetRegEx(ea, reg, value, SR_user) # Convenience functions: def here(): return ScreenEA() def isEnabled(ea): return (PrevAddr(ea+1)==ea) # Obsolete segdel macros: SEGDEL_PERM = 0x0001 # permanently, i.e. disable addresses SEGDEL_KEEP = 0x0002 # keep information (code & data, etc) SEGDEL_SILENT = 0x0004 # be silent # END OF IDC COMPATIBILY CODE