2018-01-20 06:21:42 +01:00
|
|
|
#version 420
|
|
|
|
#extension GL_ARB_texture_gather : enable
|
Update BotW packs for Vulkan (#411)
But now done properly! Basically, a bunch of improvements were made to the script. The previous attempt at this conversion was quickly followed by a rollback since I realized that the script was overlooking certain things that made most of the packs hit or miss whether they would work. A few things missing were:
- It only tested the values from 1 preset. Now, each shader gets compiled per each preset, like what Cemu would do. It also merges the changes done for each preset into one. This should solve cases where one shader would define things separately or repeatedly from preset to preset.
- All* of the shaders are tested to see if they use the converter used the right values for the locations for Vulkan.
Both of these *should* mean that they should both compile and be linkable in Vulkan, which means that I don't have to test each individual shader to see if they work. I will release the two scripts (one used for converting, one used for checking the right values for the locations) tomorrow so that other people might be able to help, if they want. It's fairly straightforward now at least.
* Organize workaround graphic packs
Pretty hard to organize these correctly, but according to our discord discussion, this was the best layout from a bunch I proposed, together with some suggestions.
* Add V4 converter script and instructions on how to use it
Now everyone BotW is done and all of the bugs have been kinked out using it (hopefully...), here's the release of the converter script in all of it's very badly coded glory. I hope I didn't leave too much debug glory in there...
Also, I hope that I didn't make too many grammatical mistakes in the instructions, but hopefully it's easy enough to follow.
2019-12-28 05:55:52 +01:00
|
|
|
#ifdef VULKAN
|
|
|
|
#define ATTR_LAYOUT(__vkSet, __location) layout(set = __vkSet, location = __location)
|
|
|
|
#define UNIFORM_BUFFER_LAYOUT(__glLocation, __vkSet, __vkLocation) layout(set = __vkSet, binding = __vkLocation, std140)
|
|
|
|
#define TEXTURE_LAYOUT(__glLocation, __vkSet, __vkLocation) layout(set = __vkSet, binding = __vkLocation)
|
|
|
|
#define SET_POSITION(_v) gl_Position = _v; gl_Position.z = (gl_Position.z + gl_Position.w) / 2.0
|
|
|
|
#define GET_FRAGCOORD() vec4(gl_FragCoord.xy*uf_fragCoordScale.xy,gl_FragCoord.zw)
|
|
|
|
#define gl_VertexID gl_VertexIndex
|
|
|
|
#define gl_InstanceID gl_InstanceIndex
|
|
|
|
#else
|
|
|
|
#define ATTR_LAYOUT(__vkSet, __location) layout(location = __location)
|
|
|
|
#define UNIFORM_BUFFER_LAYOUT(__glLocation, __vkSet, __vkLocation) layout(binding = __glLocation, std140)
|
|
|
|
#define TEXTURE_LAYOUT(__glLocation, __vkSet, __vkLocation) layout(binding = __glLocation)
|
|
|
|
#define SET_POSITION(_v) gl_Position = _v
|
|
|
|
#define GET_FRAGCOORD() vec4(gl_FragCoord.xy*uf_fragCoordScale,gl_FragCoord.zw)
|
|
|
|
#endif
|
|
|
|
// This shaders was auto-converted from OpenGL to Cemu.
|
|
|
|
|
2018-01-20 06:21:42 +01:00
|
|
|
// shader cb0e6e8cbec4502a
|
|
|
|
// DoF blur effect - Battle, Camera, Scope
|
Update BotW packs for Vulkan (#411)
But now done properly! Basically, a bunch of improvements were made to the script. The previous attempt at this conversion was quickly followed by a rollback since I realized that the script was overlooking certain things that made most of the packs hit or miss whether they would work. A few things missing were:
- It only tested the values from 1 preset. Now, each shader gets compiled per each preset, like what Cemu would do. It also merges the changes done for each preset into one. This should solve cases where one shader would define things separately or repeatedly from preset to preset.
- All* of the shaders are tested to see if they use the converter used the right values for the locations for Vulkan.
Both of these *should* mean that they should both compile and be linkable in Vulkan, which means that I don't have to test each individual shader to see if they work. I will release the two scripts (one used for converting, one used for checking the right values for the locations) tomorrow so that other people might be able to help, if they want. It's fairly straightforward now at least.
* Organize workaround graphic packs
Pretty hard to organize these correctly, but according to our discord discussion, this was the best layout from a bunch I proposed, together with some suggestions.
* Add V4 converter script and instructions on how to use it
Now everyone BotW is done and all of the bugs have been kinked out using it (hopefully...), here's the release of the converter script in all of it's very badly coded glory. I hope I didn't leave too much debug glory in there...
Also, I hope that I didn't make too many grammatical mistakes in the instructions, but hopefully it's easy enough to follow.
2019-12-28 05:55:52 +01:00
|
|
|
TEXTURE_LAYOUT(0, 1, 0) uniform sampler2D textureUnitPS0;
|
2018-01-20 06:21:42 +01:00
|
|
|
layout(location = 0) in vec4 passParameterSem3;
|
|
|
|
layout(location = 0) out vec4 passPixelColor0;
|
Update BotW packs for Vulkan (#411)
But now done properly! Basically, a bunch of improvements were made to the script. The previous attempt at this conversion was quickly followed by a rollback since I realized that the script was overlooking certain things that made most of the packs hit or miss whether they would work. A few things missing were:
- It only tested the values from 1 preset. Now, each shader gets compiled per each preset, like what Cemu would do. It also merges the changes done for each preset into one. This should solve cases where one shader would define things separately or repeatedly from preset to preset.
- All* of the shaders are tested to see if they use the converter used the right values for the locations for Vulkan.
Both of these *should* mean that they should both compile and be linkable in Vulkan, which means that I don't have to test each individual shader to see if they work. I will release the two scripts (one used for converting, one used for checking the right values for the locations) tomorrow so that other people might be able to help, if they want. It's fairly straightforward now at least.
* Organize workaround graphic packs
Pretty hard to organize these correctly, but according to our discord discussion, this was the best layout from a bunch I proposed, together with some suggestions.
* Add V4 converter script and instructions on how to use it
Now everyone BotW is done and all of the bugs have been kinked out using it (hopefully...), here's the release of the converter script in all of it's very badly coded glory. I hope I didn't leave too much debug glory in there...
Also, I hope that I didn't make too many grammatical mistakes in the instructions, but hopefully it's easy enough to follow.
2019-12-28 05:55:52 +01:00
|
|
|
#ifdef VULKAN
|
|
|
|
layout(set = 1, binding = 1) uniform ufBlock
|
|
|
|
{
|
|
|
|
uniform vec4 uf_fragCoordScale;
|
|
|
|
};
|
|
|
|
#else
|
2018-01-20 06:21:42 +01:00
|
|
|
uniform vec2 uf_fragCoordScale;
|
Update BotW packs for Vulkan (#411)
But now done properly! Basically, a bunch of improvements were made to the script. The previous attempt at this conversion was quickly followed by a rollback since I realized that the script was overlooking certain things that made most of the packs hit or miss whether they would work. A few things missing were:
- It only tested the values from 1 preset. Now, each shader gets compiled per each preset, like what Cemu would do. It also merges the changes done for each preset into one. This should solve cases where one shader would define things separately or repeatedly from preset to preset.
- All* of the shaders are tested to see if they use the converter used the right values for the locations for Vulkan.
Both of these *should* mean that they should both compile and be linkable in Vulkan, which means that I don't have to test each individual shader to see if they work. I will release the two scripts (one used for converting, one used for checking the right values for the locations) tomorrow so that other people might be able to help, if they want. It's fairly straightforward now at least.
* Organize workaround graphic packs
Pretty hard to organize these correctly, but according to our discord discussion, this was the best layout from a bunch I proposed, together with some suggestions.
* Add V4 converter script and instructions on how to use it
Now everyone BotW is done and all of the bugs have been kinked out using it (hopefully...), here's the release of the converter script in all of it's very badly coded glory. I hope I didn't leave too much debug glory in there...
Also, I hope that I didn't make too many grammatical mistakes in the instructions, but hopefully it's easy enough to follow.
2019-12-28 05:55:52 +01:00
|
|
|
#endif
|
2018-01-20 06:21:42 +01:00
|
|
|
|
|
|
|
const float resScale = 0;
|
|
|
|
const int radius = int(2*resScale);
|
|
|
|
|
|
|
|
void main() {
|
|
|
|
vec2 center = (passParameterSem3.xy + passParameterSem3.zw) / 2;
|
|
|
|
vec2 step = passParameterSem3.xw - passParameterSem3.zy;
|
|
|
|
vec4 result = vec4(0.0);
|
|
|
|
float count = 0.0;
|
|
|
|
for (int x = -radius; x <= radius; x++) {
|
|
|
|
for (int y = -radius; y <= radius; y++) {
|
|
|
|
if (length(vec2(x, y)) <= radius) {
|
|
|
|
result += texture(textureUnitPS0, center + vec2(x, y)*step);
|
|
|
|
count += 1.0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
passPixelColor0 = result / count;
|
|
|
|
}
|