#version 420 #extension GL_ARB_texture_gather : enable // shader 37040a485a29d54e //########################################################## #define Preset $preset // User Defined Preset 0 // Bruz Preset 1 // BSOD Gaming Preset 2 // Jamie Preset 3 // Contrasty Preset 4 // The Complaining Gamer Preset 5 // Filmic Preset Preset 6 // CellHunter Preset 7 // Serfrost Preset (Bright Display) 8 // Serfrost Preset (Dim Display) 9 //########################################################## #if (Preset == 0) // User Defined, values to change are below. //########################################################## #define adjust_bloom 1 // 0: disable, 1: enable. //BloomFactor const float bloomFactor = 0.020; // Default is 0.020 (rough estimate based on Switch) #define HDRpassing 0 // 0: disable, 1: enable. //Fake High Dynamic Range. const float HDRPower = 1.00; // 0.0 to 8.0 Default 1.30. const float radius1 = 1.00; // 0.0 to 8.0 Default 0.793 const float radius2 = 0.80; // 0.0 to 8.0 Default 0.87 "Raising this seems to make the effect stronger and also brighter." #define lumapassing 0 // 0: disable, 1: enable. //LumaShapening const float sharp_strength = 0.35; //[0.10 to 3.00] Strength of the sharpening Default is 0.65 const float sharp_clamp = 0.85; //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 //Advanced sharpening settings const float offset_bias = 1.0; //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. #define Tone_map 0 // 0: disable, -1 to 9: enable. // -1: disable, loss of bright detail/color but keep [0,1] intact // 0: (Wii U) BotW original // Reshade ToneMap Option 1 // linearToneMapping Option 2 // simpleReinhardToneMapping Option 3 // lumaBasedReinhardToneMapping Option 4 // whitePreservingLumaBasedReinhardToneMapping Option 5 // RomBinDaHouseToneMapping Option 6 // filmicToneMapping Option 7 // Uncharted2ToneMapping Option 8 // ACES Filmic Option 9 // Reshade ToneMap Controls / "Contrasty" Parameters const float Exposure = 1.17; // [0.0, 1.0+] Adjust exposure const float Bleach = 0.4; // "More bleach means more contrasted and less colorful image" min -0.5 max 1.0 Default 0.0 const float Gamma = 1.00; // "Adjust midtones. 1.000 is neutral. This setting does exactly the same as the one in Lift Gamma Gain, only with less control." const float defog = 0.00; // Default is 0.0 //How much of the overall color you want removed form the values of FogColor. vec3 FogColor = vec3(1.0, 1.0, 1.0); // Color you want to Add or Remove 0.25 would add .25 percent of that color 1.25 would remove .25 percent of the color." const float sat = 0.000; // "Adjust saturation" min -1.0 max 1.0 Default 0.0 const float crushContrast = 0.000; // 0.0 is neutral. Use small increments, loss of shadow detail #define post_process 0 //----------------"BotW original" vibrance adjust-------------// const float satFactor = 0.25; // 0.18 is neutral. Experimental, adjust native saturation //---------------------------------------------------------------// #define blacknwhitepass 0 // 0: disable, 1: enable. // Levels Control const int BlackPoint = 16; // [0, 255] The black point is the new black - literally. Everything darker than this will become completely black const int WhitePoint = 235; // [0, 255] The new white point. Everything brighter than this becomes completely white #define lggpass 0 // 0: disable, 1: enable. //Lift Gamma Gain vec3 RGB_Lift = vec3(1.000, 1.000, 1.000); // [0.000 to 2.000] Adjust shadows for Red, Green and Blue. vec3 RGB_Gamma = vec3(1.000, 1.000, 1.000); // [0.000 to 2.000] Adjust midtones for Red, Green and Blue vec3 RGB_Gain = vec3(1.000, 1.000, 1.000); // [0.000 to 2.000] Adjust highlights for Red, Green and Blue // Note that a value of 1.0 is a neutral setting that leave the color unchanged. #define vibpass 0 // 0: disable, 1: enable. //VibrancePass const float Vibrance = 0.150; // Default [0.150] "Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation." vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); // "A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over others."; #define Tech 0 // 0: disable, 1: enable. //Technicolor const float Power = 4.0; // Min 0.0 Max 8.0 Default 4.0 vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.20; // Min 0.0 Max 1.0 Default 0.4 #define Techine 0 // 0: disable, 1: enable. //Technicolor2 const float Technicolor2_Red_Strength = 0.02; // "Higher means darker and more intense colors." Default 0.2 const float Technicolor2_Green_Strength = 0.02; // "Higher means darker and more intense colors." Default 0.2 const float Technicolor2_Blue_Strength = 0.02; // "Higher means darker and more intense colors." Default 0.2 const float Technicolor2_Brightness = 1.00; // "Higher means brighter image." min 0.5 max 1.5 Default 1.0 const float Technicolor2_Strength = 1.00; // [Default is 1.0] const float Technicolor2_Saturation = 1.00; // Default is 1.0 min 0.0 max 1.5 "Additional saturation control since this effect tends to oversaturate the image." #define cmatrix 0 //Color Matrix vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; //Curves Contrast #define CurvesPss 0 // 0: disable, 1: enable. const float Contrast = 0.65; // Default 0.65 min -1.0 max = 1.0 "The amount of contrast you want." #define Filmicpass 0 // 0: disable, 1: enable. //Filmic Pass const float Filmic_Contrast = 1.0; // Default 1.0 min 0.5 max 2.0 const float Filmic_Bleach = 0.0; // "More bleach means more contrasted and less colorful image" min -0.5 max 1.0 Default 0.0 const float Saturation = -0.15; // min -1.0 max 1.0 Default -0.15 const float Filmic_Strength = 0.85; // "Strength of the color curve altering"; min 0.0 max 1.5 Default 0.85 const float Fade = 0.4; // "Decreases contrast to imitate faded image" min 0.0 max 0.6 Default 0.4 const float Linearization = 0.5; // min 0.5 max 2.0 Default 0.5 const float BaseCurve = 1.5; // min 0.0 max 2.0 Default 1.5 const float BaseGamma = 1.00; // min 0.7 max 2.0 Default 1.0 const float EffectGamma = 0.68; // min 0.0 max 2.0 Default 0.68 #define dpxpass 0 //DPX vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 2.5; float DPX_Strength = 0.20; //########################################################### //Do not edit under this line, unless explicitly desired. Keep backups! //Presets #elif (Preset == 1) //Bruz #define adjust_bloom 1 const float bloomFactor = 0.30; #define HDRpassing 0 float HDRPower = 1.00; float radius1 = 1.00; float radius2 = 0.80; #define lumapassing 0 float sharp_strength = 0.45; float sharp_clamp = 0.085; float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 1.17; const float Bleach = 0.4; const float Gamma = 1.00; const float defog = 0.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.000; const float crushContrast = 0.000; #define post_process 1 const float satFactor = 0.25; #define blacknwhitepass 1 const int BlackPoint = 1; const int WhitePoint = 220; #define lggpass 1 vec3 RGB_Lift = vec3(1.000, 1.000, 1.000); vec3 RGB_Gamma = vec3(1.000, 1.000, 1.000); vec3 RGB_Gain = vec3(1.000, 1.000, 1.000); #define vibpass 0 const float Vibrance = 0.150; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 1 const float Power = 8.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.3; #define Techine 1 float Technicolor2_Red_Strength = -0.05; float Technicolor2_Green_Strength = -0.1; float Technicolor2_Blue_Strength = 0.07; float Technicolor2_Brightness = 0.0; float Technicolor2_Strength = 2.0; float Technicolor2_Saturation = 1.3; //1.13 to completely fix lava #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 0 const float Contrast = 0.65; #define Filmicpass 1 const float Filmic_Strength = 0.60; const float Filmic_Contrast = 1.03; const float Fade = 0.0; const float Linearization = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.3; const float BaseCurve = 1.5; const float BaseGamma = 1.0; const float EffectGamma = 0.68; #define dpxpass 0 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 2.5; float DPX_Strength = 0.20; #elif (Preset == 2) //BSoD Gaming #define adjust_bloom 1 const float bloomFactor = 0.010; #define HDRpassing 1 const float HDRPower = 1.085; const float radius1 = 0.793; const float radius2 = 0.87; #define lumapassing 1 const float sharp_strength = 0.25; const float sharp_clamp = 0.085; const float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 0.6; const float Bleach = 0.3; const float Gamma = 1.00; const float defog = 0.004; vec3 FogColor = vec3(1.0, 1.5, 1.7); const float sat = 0.050; const float crushContrast = 0.000; #define post_process 0 const float satFactor = 0.25; #define blacknwhitepass 0 const int BlackPoint = 8; const int WhitePoint = 235; #define lggpass 1 vec3 RGB_Lift = vec3(0.994, 0.994, 0.994); vec3 RGB_Gamma = vec3(1.0, 0.990, 1.0); vec3 RGB_Gain = vec3(1.0, 0.990, 1.00); #define vibpass 1 const float Vibrance = 0.113; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 0 const float Power = 4.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.20; #define Techine 0 const float Technicolor2_Red_Strength = 0.000; const float Technicolor2_Green_Strength = 0.000; const float Technicolor2_Blue_Strength = 0.000; const float Technicolor2_Brightness = 1.0; const float Technicolor2_Strength = 0.40; const float Technicolor2_Saturation = 0.70; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 0 const float Contrast = 0.65; #define Filmicpass 1 const float Filmic_Contrast = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.15; const float Filmic_Strength = 0.85; const float Fade = 0.4; const float Linearization = 0.5; const float BaseCurve = 1.5; const float BaseGamma = 0.7; const float EffectGamma = 0.68; #define dpxpass 0 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 2.5; float DPX_Strength = 0.20; #elif (Preset == 3) //Jamie #define adjust_bloom 1 const float bloomFactor = 0.020; #define HDRpassing 1 const float HDRPower = 1.00; const float radius1 = 1.00; const float radius2 = 0.80; #define lumapassing 1 const float sharp_strength = 0.35; const float sharp_clamp = 0.85; const float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 1.17; const float Bleach = 0.4; const float Gamma = 1.00; const float defog = 0.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.000; const float crushContrast = 0.000; #define post_process 1 const float satFactor = 0.25; #define blacknwhitepass 0 const int BlackPoint = 16; const int WhitePoint = 235; #define lggpass 1 vec3 RGB_Lift = vec3(0.980, 0.980, 0.980); vec3 RGB_Gamma = vec3(1.000, 1.000, 1.000); vec3 RGB_Gain = vec3(1.000, 1.000, 1.000); #define vibpass 0 const float Vibrance = 0.150; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 0 const float Power = 4.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.20; #define Techine 0 const float Technicolor2_Red_Strength = 0.02; const float Technicolor2_Green_Strength = 0.02; const float Technicolor2_Blue_Strength = 0.02; const float Technicolor2_Brightness = 1.00; const float Technicolor2_Strength = 1.00; const float Technicolor2_Saturation = 1.00; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 0 const float Contrast = 0.65; #define Filmicpass 0 const float Filmic_Contrast = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.15; const float Filmic_Strength = 0.85; const float Fade = 0.4; const float Linearization = 0.5; const float BaseCurve = 1.5; const float BaseGamma = 1.00; const float EffectGamma = 0.68; #define dpxpass 1 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 0.0; float Colorfulness = 1.0; float DPX_Strength = 0.20; #elif (Preset == 4) //Contrasty #define adjust_bloom 1 const float bloomFactor = 0.020; #define HDRpassing 0 const float HDRPower = 1.00; const float radius1 = 1.00; const float radius2 = 0.80; #define lumapassing 0 const float sharp_strength = 0.35; const float sharp_clamp = 0.85; const float offset_bias = 1.0; #define Tone_map 1 const float Exposure = 1.17; const float Bleach = 0.3; const float Gamma = 0.810; const float defog = 0.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.000; const float crushContrast = 0.000; #define post_process 1 const float satFactor = 0.25; #define blacknwhitepass 0 const int BlackPoint = 16; const int WhitePoint = 235; #define lggpass 0 vec3 RGB_Lift = vec3(1.000, 1.000, 1.000); vec3 RGB_Gamma = vec3(1.000, 1.000, 1.000); vec3 RGB_Gain = vec3(1.000, 1.000, 1.000); #define vibpass 0 const float Vibrance = 0.150; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 0 const float Power = 4.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.20; #define Techine 0 const float Technicolor2_Red_Strength = 0.02; const float Technicolor2_Green_Strength = 0.02; const float Technicolor2_Blue_Strength = 0.02; const float Technicolor2_Brightness = 1.00; const float Technicolor2_Strength = 1.00; const float Technicolor2_Saturation = 1.00; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 1 const float Contrast = 0.65; #define Filmicpass 0 const float Filmic_Contrast = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.15; const float Filmic_Strength = 0.85; const float Fade = 0.4; const float Linearization = 0.5; const float BaseCurve = 1.5; const float BaseGamma = 1.00; const float EffectGamma = 0.68; #define dpxpass 0 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 2.5; float DPX_Strength = 0.20; #elif (Preset == 5) //The Complaining Gamer #define adjust_bloom 1 const float bloomFactor = 0.33; #define HDRpassing 1 const float HDRPower = 1.020; const float radius1 = 0.793; const float radius2 = 0.87; #define lumapassing 1 const float sharp_strength = 0.25; const float sharp_clamp = 0.85; const float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 1.17; const float Bleach = 0.4; const float Gamma = 1.00; const float defog = 0.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.000; const float crushContrast = 0.000; #define post_process 0 const float satFactor = 0.25; #define blacknwhitepass 0 const int BlackPoint = 16; const int WhitePoint = 235; #define lggpass 1 vec3 RGB_Lift = vec3(1.000, 1.000, 1.000); vec3 RGB_Gamma = vec3(0.600, 0.600, 0.600); vec3 RGB_Gain = vec3(1.000, 1.000, 1.000); #define vibpass 1 const float Vibrance = 0.150; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 0 const float Power = 4.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.20; #define Techine 1 const float Technicolor2_Red_Strength = 0.000; const float Technicolor2_Green_Strength = 0.000; const float Technicolor2_Blue_Strength = 0.000; const float Technicolor2_Brightness = 1.0; const float Technicolor2_Strength = 0.40; const float Technicolor2_Saturation = 0.51; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 1 const float Contrast = 0.65; #define Filmicpass 0 const float Filmic_Contrast = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.15; const float Filmic_Strength = 0.85; const float Fade = 0.4; const float Linearization = 0.5; const float BaseCurve = 1.5; const float BaseGamma = 1.00; const float EffectGamma = 0.68; #define dpxpass 0 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 2.5; float DPX_Strength = 0.20; #elif (Preset == 6) //Filmic #define adjust_bloom 1 const float bloomFactor = 0.020; #define HDRpassing 1 const float HDRPower = 1.20; const float radius1 = 1.00; const float radius2 = 0.80; #define lumapassing 1 const float sharp_strength = 0.35; const float sharp_clamp = 0.85; const float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 1.17; const float Bleach = 0.4; const float Gamma = 1.00; const float defog = 0.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.000; const float crushContrast = 0.000; #define post_process 1 const float satFactor = 0.25; #define blacknwhitepass 0 const int BlackPoint = 16; const int WhitePoint = 235; #define lggpass 0 vec3 RGB_Lift = vec3(0.990, 0.990, 0.990); vec3 RGB_Gamma = vec3(1.000, 1.000, 1.000); vec3 RGB_Gain = vec3(1.000, 1.000, 1.000); #define vibpass 1 const float Vibrance = 0.150; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 0 const float Power = 4.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.20; #define Techine 0 const float Technicolor2_Red_Strength = 0.02; const float Technicolor2_Green_Strength = 0.02; const float Technicolor2_Blue_Strength = 0.02; const float Technicolor2_Brightness = 1.00; const float Technicolor2_Strength = 1.00; const float Technicolor2_Saturation = 1.00; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 1 const float Contrast = 0.65; #define Filmicpass 1 const float Filmic_Contrast = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.15; const float Filmic_Strength = 0.85; const float Fade = 0.4; const float Linearization = 0.5; const float BaseCurve = 1.5; const float BaseGamma = 1.00; const float EffectGamma = 0.68; #define dpxpass 1 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 2.0; float Colorfulness = 1.5; float DPX_Strength = 0.20; #elif (Preset == 7) //CellHunter #define adjust_bloom 1 const float bloomFactor = 0.445; #define HDRpassing 1 const float HDRPower = 1.000; const float radius1 = 1.135; const float radius2 = 1.000; #define lumapassing 1 const float sharp_strength = 0.65; const float sharp_clamp = 0.75; const float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 1.17; const float Bleach = 0.0; const float Gamma = 1.00; const float defog = 0.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.000; const float crushContrast = 0.000; #define post_process 0 const float satFactor = 0.25; #define blacknwhitepass 0 const int BlackPoint = 16; const int WhitePoint = 215; #define lggpass 1 vec3 RGB_Lift = vec3(0.985, 0.960, 1.005); vec3 RGB_Gamma = vec3(0.985, 0.960, 1.005); vec3 RGB_Gain = vec3(0.985, 0.960, 1.005); #define vibpass 1 const float Vibrance = 0.245; vec3 VibranceRGBBalance = vec3(1.00, 1.00, 1.00); #define Tech 0 const float Power = 4.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.20; #define Techine 0 const float Technicolor2_Red_Strength = 0.02; const float Technicolor2_Green_Strength = 0.02; const float Technicolor2_Blue_Strength = 0.02; const float Technicolor2_Brightness = 1.00; const float Technicolor2_Strength = 1.00; const float Technicolor2_Saturation = 1.00; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 1 const float Contrast = 0.245; #define Filmicpass 0 const float Filmic_Contrast = 0.97; const float Filmic_Bleach = 0.0; const float Saturation = -0.15; const float Filmic_Strength = 0.65; const float Fade = 0.2; const float Linearization = 0.7; const float BaseCurve = 1.5; const float BaseGamma = 0.90; const float EffectGamma = 0.68; #define dpxpass 0 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 2.5; float DPX_Strength = 0.20; #elif (Preset == 8) //Serfrost (Bright Display) #define adjust_bloom 1 const float bloomFactor = 0.40; #define HDRpassing 1 const float HDRPower = 1.20; const float radius1 = 0.793; const float radius2 = 0.87; #define lumapassing 0 const float sharp_strength = 0.45; const float sharp_clamp = 0.85; const float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 1.17; const float Bleach = 0.0; const float Gamma = 0.98; const float defog = 1.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.00; const float crushContrast = 0.00; #define post_process 0 const float satFactor = 0.07; #define blacknwhitepass 1 const int BlackPoint = 2; const int WhitePoint = 300; #define lggpass 1 vec3 RGB_Lift = vec3(1.027, 1.027, 1.027); vec3 RGB_Gamma = vec3(0.83, 0.83, 0.83); vec3 RGB_Gain = vec3(1.10, 1.10, 1.10); #define vibpass 1 const float Vibrance = 0.15; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 0 const float Power = 5.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.10; #define Techine 1 float Technicolor2_Red_Strength = -0.09; float Technicolor2_Green_Strength = -0.09; float Technicolor2_Blue_Strength = -0.00; float Technicolor2_Brightness = 0.4; float Technicolor2_Strength = 1.2; float Technicolor2_Saturation = 1.1; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 0 const float Contrast = 0.0; #define Filmicpass 1 const float Filmic_Contrast = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.17; const float Filmic_Strength = 0.48; const float Fade = 0.08; const float Linearization = 1.0; const float BaseCurve = 1.0; const float BaseGamma = 1.0; const float EffectGamma = 1.68; #define dpxpass 0 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 1.0; float DPX_Strength = 0.20; #elif (Preset == 9) //Serfrost (Dim Display) #define adjust_bloom 1 const float bloomFactor = 0.7; #define HDRpassing 1 const float HDRPower = 1.20; const float radius1 = 0.793; const float radius2 = 0.87; #define lumapassing 0 const float sharp_strength = 0.45; const float sharp_clamp = 0.85; const float offset_bias = 1.0; #define Tone_map 8 const float Exposure = 1.17; const float Bleach = 0.0; const float Gamma = 1.05; const float defog = 1.00; vec3 FogColor = vec3(1.0, 1.0, 1.0); const float sat = 0.0; const float crushContrast = 0.00; #define post_process 0 const float satFactor = 0.07; #define blacknwhitepass 1 const int BlackPoint = 1; const int WhitePoint = 235; #define lggpass 1 vec3 RGB_Lift = vec3(1.027, 1.027, 1.027); vec3 RGB_Gamma = vec3(0.83, 0.83, 0.83); vec3 RGB_Gain = vec3(1.10, 1.10, 1.10); #define vibpass 1 const float Vibrance = 0.45; vec3 VibranceRGBBalance = vec3(1.0, 1.0, 1.0); #define Tech 0 const float Power = 5.0; vec3 RGBNegativeAmount = vec3(0.88, 0.88, 0.88); float Strength = 0.10; #define Techine 1 float Technicolor2_Red_Strength = -0.09; float Technicolor2_Green_Strength = -0.09; float Technicolor2_Blue_Strength = -0.00; float Technicolor2_Brightness = 0.4; float Technicolor2_Strength = 1.2; float Technicolor2_Saturation = 1.15; #define cmatrix 0 vec3 ColorMatrix_Red = vec3(0.817, 0.183, 0.000); vec3 ColorMatrix_Green = vec3(0.333, 0.667, 0.000); vec3 ColorMatrix_Blue = vec3(0.000, 0.125, 0.875); float CM_Strength = 1.0; #define CurvesPss 0 const float Contrast = 0.0; #define Filmicpass 1 const float Filmic_Contrast = 1.0; const float Filmic_Bleach = 0.0; const float Saturation = -0.17; const float Filmic_Strength = 0.48; const float Fade = 0.08; const float Linearization = 1.0; const float BaseCurve = 1.0; const float BaseGamma = 1.0; const float EffectGamma = 1.68; #define dpxpass 0 vec3 RGB_Curve = vec3(8.0, 8.0, 8.0); vec3 RGB_C = vec3(0.36, 0.36, 0.34); float DPX_Contrast = 0.1; float DPX_Saturation = 3.0; float Colorfulness = 1.0; float DPX_Strength = 0.20; #endif //########################################################### uniform ivec4 uf_remappedPS[1]; layout(binding = 0) uniform sampler2D textureUnitPS0; // Bloom layout(binding = 1) uniform sampler2D textureUnitPS1;// HDR LumaShapening. layout(location = 0) in vec4 passParameterSem0; layout(location = 0) out vec4 passPixelColor0; uniform vec2 uf_fragCoordScale; //ToneMapping vec3 linearToneMapping(vec3 color) { float exposure = 1.; color = clamp(exposure * color, 0., 1.); color = pow(color, vec3(1. / Gamma)); return color; } vec3 simpleReinhardToneMapping(vec3 color) { float exposure = 1.5; color *= exposure / (1. + color / exposure); color = pow(color, vec3(1. / Gamma)); return color; } vec3 lumaBasedReinhardToneMapping(vec3 color) { float luma = dot(color, vec3(0.2126, 0.7152, 0.0722)); float toneMappedLuma = luma / (1. + luma); color *= toneMappedLuma / luma; color = pow(color, vec3(1. / Gamma)); return color; } vec3 whitePreservingLumaBasedReinhardToneMapping(vec3 color) { float white = 2.; float luma = dot(color, vec3(0.2126, 0.7152, 0.0722)); float toneMappedLuma = luma * (1. + luma / (white*white)) / (1. + luma); color *= toneMappedLuma / luma; color = pow(color, vec3(1. / Gamma)); return color; } vec3 RomBinDaHouseToneMapping(vec3 color) { color = exp(-1.0 / (2.72*color + 0.15)); color = pow(color, vec3(1. / Gamma)); return color; } vec3 filmicToneMapping(vec3 color) { color = max(vec3(0.), color - vec3(0.004)); color = (color * (6.2 * color + .5)) / (color * (6.2 * color + 1.7) + 0.06); return color; } vec3 Uncharted2ToneMapping(vec3 color) { float A = 0.15; float B = 0.50; float C = 0.10; float D = 0.20; float E = 0.02; float F = 0.30; float W = 11.2; float exposure = 2.; color *= exposure; color = ((color * (A * color + C * B) + D * E) / (color * (A * color + B) + D * F)) - E / F; float white = ((W * (A * W + C * B) + D * E) / (W * (A * W + B) + D * F)) - E / F; color /= white; color = pow(color, vec3(1. / Gamma)); return color; } vec3 ReshadeToneMap(vec3 inputColor) { vec3 color = inputColor; color = clamp(color - defog * FogColor * 2.55, 0.0, 1.0); // defog color *= Exposure / (1.0 + color / Exposure); color = pow(color, vec3(1. / Gamma)); // Gamma const vec3 coefLuma = vec3(0.2126, 0.7152, 0.0722); float lum = dot(coefLuma, color); float L = clamp(10.0 * (lum - 0.45), 0.0, 1.0); vec3 A2 = Bleach * color; vec3 result1 = 2.0f * color * lum; vec3 result2 = 1.0f - 2.0f * (1.0f - lum) * (1.0f - color); vec3 newColor = mix(result1, result2, L); vec3 mixRGB = A2 * newColor; color += ((1.0f - A2) * mixRGB); vec3 middlegray = vec3(dot(color, vec3(1.0 / 3.0))); vec3 diffcolor = color - middlegray; color = (color + diffcolor * sat) / (1 + (diffcolor * sat)); // saturation return color; } float getL601(vec3 rgb) { return dot(rgb, vec3(0.2989, 0.5866, 0.1145)); } float getL709(vec3 rgb) { return dot(rgb, vec3(0.2126, 0.7152, 0.0722)); } vec3 BotWToneMap(vec3 color) { float Lumn = getL601(color); vec4 exptm = 1.0 - exp(-vec4(color, Lumn)); vec3 cpre = exptm.w / Lumn * color; vec3 colorldr = mix(cpre, exptm.rgb, vec3(pow(exptm.w, 2.0)));//refine return colorldr; } vec3 ACESFilm(vec3 color) { color *= Exposure; float Lumn = getL709(color); vec4 tm = vec4(color, Lumn); tm = (tm*(2.51*tm + 0.03)) / (tm*(2.43*tm + 0.59) + 0.14); // tonemap vec3 cpre = tm.w / Lumn * color; vec3 colorldr = mix(cpre, tm.rgb, vec3(pow(tm.w, 2.0)));//refine return colorldr; } //Curves vec3 CurvesPass(vec3 inputColor) { vec3 colorInput = inputColor; float Contrast_blend = Contrast * 2.0; //I multiply by two to give it a strength closer to the other curves. vec3 x = colorInput.rgb; //if the curve should be applied to both Luma and Chroma x = x * (x * (1.5 - x) + 0.5); //horner form - fastest version vec3 color = x; //if the curve should be applied to both Luma and Chroma colorInput.rgb = mix(colorInput.rgb, color, Contrast_blend); //Blend by Contrast return colorInput; } //TECHNICOLOR2 vec3 Technicolor2(vec3 inputColor) { vec3 color = inputColor; vec3 Color_Strength = vec3(Technicolor2_Red_Strength, Technicolor2_Green_Strength, Technicolor2_Blue_Strength); vec3 source = color; vec3 temp = 1.0 - source; vec3 target = temp.grg; vec3 target2 = temp.bbr; vec3 temp2 = source * target; temp2 *= target2; temp = temp2 * Color_Strength; temp2 *= Technicolor2_Brightness; target = temp.grg; target2 = temp.bbr; temp = source - target; temp += temp2; temp2 = temp - target2; color = mix(source, temp2, Technicolor2_Strength); color = mix(vec3(dot(color, vec3(0.333))), color, Technicolor2_Saturation); return color; } //Technicolor vec3 TechnicolorPass(vec3 color) { const vec3 cyanfilter = vec3(0.0, 1.30, 1.0); const vec3 magentafilter = vec3(1.0, 0.0, 1.05); const vec3 yellowfilter = vec3(1.6, 1.6, 0.05); const vec2 redorangefilter = vec2(1.05, 0.620); // RG_ const vec2 greenfilter = vec2(0.30, 1.0); // RG_ const vec2 magentafilter2 = magentafilter.rb; // R_B vec3 tcol = color.rgb; vec2 negative_mul_r = tcol.rg * (1.0 / (RGBNegativeAmount.r * Power)); vec2 negative_mul_g = tcol.rg * (1.0 / (RGBNegativeAmount.g * Power)); vec2 negative_mul_b = tcol.rb * (1.0 / (RGBNegativeAmount.b * Power)); vec3 output_r = dot(redorangefilter, negative_mul_r).xxx + cyanfilter; vec3 output_g = dot(greenfilter, negative_mul_g).xxx + magentafilter; vec3 output_b = dot(magentafilter2, negative_mul_b).xxx + yellowfilter; return mix(tcol, output_r * output_g * output_b, Strength); } //ColorMatrix vec3 ColorMatrixPass(vec3 inputColor) { vec3 color = inputColor; const mat3 ColorMatrix = mat3(ColorMatrix_Red, ColorMatrix_Green, ColorMatrix_Blue); //color = mix(color, * (ColorMatrix, color), CM_Strength); color *= mix(color, (ColorMatrix, color), CM_Strength); return clamp(color, 0.0, 1.); } // Contrasty vec3 BotWVibrance(vec3 color) { float avg = (color.r + color.g + color.b) / 3.0; float maxc = max(color.r, max(color.g, color.b)); float w = 1.0 - pow(1.0 - 2.0 * avg, 2.0); float weight = 1.0 + w * satFactor; vec3 satcolor = mix(vec3(maxc), color, weight); return satcolor; } vec3 ReshadeVibrance(vec3 color) { float max_color = max(color.r, max(color.g, color.b)); // Find the strongest color float min_color = min(color.r, min(color.g, color.b)); // Find the weakest color float luma = getL709(color); float color_saturation = max_color - min_color; // The difference between the two is the saturation vec3 coeffVibrance = VibranceRGBBalance * Vibrance; color = mix(vec3(luma), color, 1.0 + (coeffVibrance * (1.0 - (sign(coeffVibrance) * color_saturation)))); return color; } vec3 Contrasty(vec3 fColour) { fColour = max(vec3(0.0), fColour - vec3(crushContrast)); fColour = clamp(Exposure * fColour, 0.0, 1.0); fColour = pow(fColour, vec3(1.0 / Gamma)); fColour = ReshadeVibrance(fColour); // reshade's identical, only a little stronger when at same setting return fColour; } // Levels vec3 LevelsPass(vec3 inputColor) { float black_point_float = BlackPoint / 255.0; float white_point_float = WhitePoint == BlackPoint ? (255.0 / 0.00025) : (255.0 / (WhitePoint - BlackPoint)); // Avoid division by zero if the white and black point are the same vec3 color = inputColor; color = color * white_point_float - (black_point_float * white_point_float); return color; } //FilmPass vec3 FilmPass(vec3 inputColor) { vec3 B = inputColor.rgb; vec3 G = B; vec3 H = vec3(0.01); B = clamp(B, 0.0, 1.); B = pow(vec3(B), vec3(Linearization)); B = mix(H, B, Filmic_Contrast); vec3 LumCoeff = vec3(0.2126, 0.7152, 0.0722); float A = dot(B.rgb, LumCoeff); vec3 D = vec3(A); B = pow(B, 1.0 / vec3(BaseGamma)); float RedCurve = 1.0; float GreenCurve = 1.0; float BlueCurve = 1.0; float a = RedCurve; float b = GreenCurve; float c = BlueCurve; float d = BaseCurve; float y = 1.0 / (1.0 + exp(a / 2.0)); float z = 1.0 / (1.0 + exp(b / 2.0)); float w = 1.0 / (1.0 + exp(c / 2.0)); float v = 1.0 / (1.0 + exp(d / 2.0)); vec3 C = B; D.r = (1.0 / (1.0 + exp(-a * (D.r - 0.5))) - y) / (1.0 - 2.0 * y); D.g = (1.0 / (1.0 + exp(-b * (D.g - 0.5))) - z) / (1.0 - 2.0 * z); D.b = (1.0 / (1.0 + exp(-c * (D.b - 0.5))) - w) / (1.0 - 2.0 * w); D = pow(D, 1.0 / vec3(EffectGamma)); vec3 Di = 1.0 - D; D = mix(D, Di, Filmic_Bleach); float EffectGammaR = 1.0; float EffectGammaG = 1.0; float EffectGammaB = 1.0; D.r = pow(abs(D.r), 1.0 / EffectGammaR); D.g = pow(abs(D.g), 1.0 / EffectGammaG); D.b = pow(abs(D.b), 1.0 / EffectGammaB); if (D.r < 0.5) C.r = (2.0 * D.r - 1.0) * (B.r - B.r * B.r) + B.r; else C.r = (2.0 * D.r - 1.0) * (sqrt(B.r) - B.r) + B.r; if (D.g < 0.5) C.g = (2.0 * D.g - 1.0) * (B.g - B.g * B.g) + B.g; else C.g = (2.0 * D.g - 1.0) * (sqrt(B.g) - B.g) + B.g; if (D.b < 0.5) C.b = (2.0 * D.b - 1.0) * (B.b - B.b * B.b) + B.b; else C.b = (2.0 * D.b - 1.0) * (sqrt(B.b) - B.b) + B.b; vec3 F = mix(B, C, Filmic_Strength); F = (1.0 / (1.0 + exp(-d * (F - 0.5))) - v) / (1.0 - 2.0 * v); float r2R = 1.0 - Saturation; float g2R = 0.0 + Saturation; float b2R = 0.0 + Saturation; float r2G = 0.0 + Saturation; float g2G = (1.0 - Fade) - Saturation; float b2G = (0.0 + Fade) + Saturation; float r2B = 0.0 + Saturation; float g2B = (0.0 + Fade) + Saturation; float b2B = (1.0 - Fade) - Saturation; vec3 iF = F; F.r = (iF.r * r2R + iF.g * g2R + iF.b * b2R); F.g = (iF.r * r2G + iF.g * g2G + iF.b * b2G); F.b = (iF.r * r2B + iF.g * g2B + iF.b * b2B); float N = dot(F.rgb, LumCoeff); vec3 Cn = F; if (N < 0.5) Cn = (2.0 * N - 1.0) * (F - F * F) + F; else Cn = (2.0 * N - 1.0) * (sqrt(F) - F) + F; Cn = pow(max(Cn, 0), 1.0 / vec3(Linearization)); vec3 Fn = mix(B, Cn, Filmic_Strength); return Fn; } //DPX const mat3 RGB = mat3( 2.6714711726599600, -1.2672360578624100, -0.4109956021722270, -1.0251070293466400, 1.9840911624108900, 0.0439502493584124, 0.0610009456429445, -0.2236707508128630, 1.1590210416706100 ); const mat3 XYZ = mat3( 0.5003033835433160, 0.3380975732227390, 0.1645897795458570, 0.2579688942747580, 0.6761952591447060, 0.0658358459823868, 0.0234517888692628, 0.1126992737203000, 0.8668396731242010 ); vec3 DPXPass(vec3 inputColor) { vec3 color = inputColor; vec3 B = color; B = B * (1.0 - DPX_Contrast) + (0.5 * DPX_Contrast); vec3 Btemp = (1.0 / (1.0 + exp(RGB_Curve / 2.0))); B = ((1.0 / (1.0 + exp(-RGB_Curve * (B - RGB_C)))) / (-2.0 * Btemp + 1.0)) + (-Btemp / (-2.0 * Btemp + 1.0)); float value = max(max(B.r, B.g), B.b); vec3 Ztemp = B / value; color = pow(abs(color), 1. / vec3(Colorfulness)); vec3 c0 = Ztemp * value; c0 *= (XYZ, c0); float luma = dot(c0, vec3(0.30, 0.59, 0.11)); c0 = (1.0 - DPX_Saturation) * luma + DPX_Saturation * c0; c0 *= (RGB, c0); return mix(color, c0, DPX_Strength); } //Lift Gamma Gain vec3 LiftGammaGainPass(vec3 colorInput) { // -- Get input -- vec3 color = colorInput; // -- Lift -- color = color * (1.5 - 0.5 * RGB_Lift) + 0.5 * RGB_Lift - 0.5; color = clamp(color, 0.0, 1.0); //isn't strictly necessary, but doesn't cost performance. // -- Gain -- color *= RGB_Gain; // -- Gamma -- color = pow(color, 1.0 / RGB_Gamma); //Gamma // -- Return output -- return clamp(color, 0.0, 1.0); } //VibrancePass vec3 VibrancePass(vec3 color) { const vec3 coefLuma = vec3(0.2126, 0.7152, 0.0722); float luma = dot(coefLuma, color); float max_color = max(color.r, max(color.g, color.b)); // Find the strongest color float min_color = min(color.r, min(color.g, color.b)); // Find the weakest color float color_saturation = max_color - min_color; // The difference between the two is the saturation // Extrapolate between luma and original by 1 + (1-saturation) - current vec3 coeffVibrance = VibranceRGBBalance * Vibrance; color = mix(vec3(luma), color, 1.0 + (coeffVibrance * (1.0 - (sign(coeffVibrance) * color_saturation)))); return color; } //LumaShapening #define px (1.0/1280.0*uf_fragCoordScale.x) #define py (1.0/720.0*uf_fragCoordScale.y) #define CoefLuma vec3(0.2126, 0.7152, 0.0722) float lumasharping(sampler2D tex, vec2 pos) { vec4 colorInput = texture(tex, pos); vec3 ori = colorInput.rgb; // -- Combining the strength and luma multipliers -- vec3 sharp_strength_luma = (CoefLuma * sharp_strength); // -- Gaussian filter -- // [ .25, .50, .25] [ 1 , 2 , 1 ] // [ .50, 1, .50] = [ 2 , 4 , 2 ] // [ .25, .50, .25] [ 1 , 2 , 1 ] vec3 blur_ori = texture(tex, pos + vec2(px, -py) * 0.5 * offset_bias).rgb; // South East blur_ori += texture(tex, pos + vec2(-px, -py) * 0.5 * offset_bias).rgb; // South West blur_ori += texture(tex, pos + vec2(px, py) * 0.5 * offset_bias).rgb; // North East blur_ori += texture(tex, pos + vec2(-px, py) * 0.5 * offset_bias).rgb; // North West blur_ori *= 0.25; // ( /= 4) Divide by the number of texture fetches // -- Calculate the sharpening -- vec3 sharp = ori - blur_ori; //Subtracting the blurred image from the original image // -- Adjust strength of the sharpening and clamp it-- vec4 sharp_strength_luma_clamp = vec4(sharp_strength_luma * (0.5 / sharp_clamp), 0.5); //Roll part of the clamp into the dot float sharp_luma = clamp((dot(vec4(sharp, 1.0), sharp_strength_luma_clamp)), 0.0, 1.0); //Calculate the luma, adjust the strength, scale up and clamp sharp_luma = (sharp_clamp * 2.0) * sharp_luma - sharp_clamp; //scale down return sharp_luma; } //Fake High Dynamic Range. vec3 HDRPass(sampler2D tex, vec2 pos) { vec3 color = texture(tex, pos).rgb; vec3 bloom_sum1 = texture(tex, pos + vec2(1.5, -1.5) * radius1 * vec2(px, py)).rgb; bloom_sum1 += texture(tex, pos + vec2(-1.5, -1.5) * radius1 * vec2(px, py)).rgb; bloom_sum1 += texture(tex, pos + vec2(1.5, 1.5) * radius1 * vec2(px, py)).rgb; bloom_sum1 += texture(tex, pos + vec2(-1.5, 1.5) * radius1 * vec2(px, py)).rgb; bloom_sum1 += texture(tex, pos + vec2(0.0, -2.5) * radius1 * vec2(px, py)).rgb; bloom_sum1 += texture(tex, pos + vec2(0.0, 2.5) * radius1 * vec2(px, py)).rgb; bloom_sum1 += texture(tex, pos + vec2(-2.5, 0.0) * radius1 * vec2(px, py)).rgb; bloom_sum1 += texture(tex, pos + vec2(2.5, 0.0) * radius1 * vec2(px, py)).rgb; bloom_sum1 *= 0.005; vec3 bloom_sum2 = texture(tex, pos + vec2(1.5, -1.5) * radius2 * vec2(px, py)).rgb; bloom_sum2 += texture(tex, pos + vec2(-1.5, -1.5) * radius2 * vec2(px, py)).rgb; bloom_sum2 += texture(tex, pos + vec2(1.5, 1.5) * radius2 * vec2(px, py)).rgb; bloom_sum2 += texture(tex, pos + vec2(-1.5, 1.5) * radius2 * vec2(px, py)).rgb; bloom_sum2 += texture(tex, pos + vec2(0.0, -2.5) * radius2 * vec2(px, py)).rgb; bloom_sum2 += texture(tex, pos + vec2(0.0, 2.5) * radius2 * vec2(px, py)).rgb; bloom_sum2 += texture(tex, pos + vec2(-2.5, 0.0) * radius2 * vec2(px, py)).rgb; bloom_sum2 += texture(tex, pos + vec2(2.5, 0.0) * radius2 * vec2(px, py)).rgb; bloom_sum2 *= 0.010; float dist = radius2 - radius1; vec3 HDR = (color + (bloom_sum2 - bloom_sum1)) * dist; vec3 blend = HDR + color; color = pow(abs(blend), vec3(abs(HDRPower))) + HDR; return color; } void main() { //Bloom vec3 bloom = texture(textureUnitPS0, passParameterSem0.xy).xyz; #if (adjust_bloom == 1) bloom *= bloomFactor; #endif //HDR and LumaShapening #if (HDRpassing == 1) passPixelColor0.xyz = HDRPass(textureUnitPS1, passParameterSem0.xy).xyz; #endif #if (HDRpassing == 0) passPixelColor0.xyz = texture(textureUnitPS1, passParameterSem0.xy).xyz; #endif #if (lumapassing == 1) float smask = lumasharping(textureUnitPS1, passParameterSem0.xy); passPixelColor0.xyz += vec3(smask); #endif // Do not edit this vec3 color = (passPixelColor0.xyz); color += bloom; //++++++++++++++++++++++++++++++++++ // Tonemapping #if (Tone_map == -1) color = clamp(color*Exposure, 0.0, 1.0); #elif (Tone_map == 0) color = BotWToneMap(color); #elif (Tone_map == 1) color = ReshadeToneMap(color); #elif (Tone_map == 2) color = linearToneMapping(color); #elif (Tone_map == 3) color = simpleReinhardToneMapping(color); #elif (Tone_map == 4) color = lumaBasedReinhardToneMapping(color); #elif (Tone_map == 5) color = whitePreservingLumaBasedReinhardToneMapping(color); #elif (Tone_map == 6) color = RomBinDaHouseToneMapping(color); #elif (Tone_map == 7) color = filmicToneMapping(color); #elif (Tone_map == 8) color = Uncharted2ToneMapping(color); #elif (tone_mapping == 9) color = ACESFilm(color); #endif // Levels Control if we tone map to 16-235 , 0 - 255 or usr defined range. #if (blacknwhitepass == 1) color = LevelsPass(color); #endif // Color matrix #if (cmatrix == 1) color = ColorMatrixPass(color); #endif // Post Processing #if (Tech == 1) color = TechnicolorPass(color); #endif #if (Techine == 1) color = Technicolor2(color); #endif #if (post_process == 0) color = BotWVibrance(color); #endif #if (post_process == 1) color = Contrasty(color); #endif #if (dpxpass == 1) color = DPXPass(color); #endif #if (Filmicpass == 1) color = FilmPass(color); #endif #if (lggpass == 1) color = LiftGammaGainPass(color); #endif #if (CurvesPss == 1) color = CurvesPass(color); #endif #if (vibpass == 1) color = VibrancePass(color); #endif passPixelColor0 = vec4(color, passParameterSem0.w); } //########################################################## // Possible problems // Being below 1.3.3 will give you double-vision with recent graphic packs. Update to 1.3.0 or above. // If you're experiencing any issues (due to having the previous Clarity shaders installed), please remove and redownload all of the BotW packs. // Clarity GFX // Credit to Jamie for main coding. // Credit to Kiri coding & Reshade logic. // Credit to Crementif for Help. // Credit to Serfrost for preset values. // Shader dumped from Cemu 1.11.2 from BotW 1.4.0 // v 2.2 Final // Add 1.4.0 support